Home > HARDWARE > CONSTRUCTION HARDWARE > VENTILATION PRODUCTS > FOUNDATION VENTS
Sort By:
1
Acorn BT176-1C Bar Tie Marshalltown 14731 Manual Tie Wire Twister Mintcraft 16570 Rugged Wire Twister
Used to secure the position of rebar during concrete pouring. Safely and easily twists wire bar ties. Plastic handle. Rugged design. Compact size allows the tool to be used in tight space. Safely and easily twists wire bar ties. Hardwood handle, Ergonomic design.
Billy Penn 08212-25 Manual Bar Tie Twister Bestvents 510BL Open Air Grille Foundation Vent Quik-Tube 6922-01 Building Form
Makes tying fast and easy. Wood handle. Grill wiith a flange and (4) screws to hold it in the foundation opening; has NO flap or slide mechanism to open or close it, so the air can constantly move through. Size: 7-3/4" x 15-1/4" so it easily fits the standard 8" x 16" block foundation opening. Used by homeowners and residential contractors to create everything from lamp post and mailbox bases to deck supports. Easy-to-use cardboard tube, scaled-down version of rigid fiber forms that heavy-construction contractors use. Pour concrete in form, let it dry, then cut away form. Length can be cut down if needed.
Bestvents 327BL Jumbo Foundation Vent Bestvents 500BL Manual Foundation Vent with Damper Bestvents 500BR Manual Foundation Vent with Damper
For King and Queen size brick. Fits 9-1/4" x 16" vent openings. 1-3/4" frame depth and 8" x 8" sized mesh. Mesh is made of aluminum perma kote epoxy charcoal. Frame is made of high-density polypropylene resins. 9-1/4" x 16". Bestvents Foundation Vent, Manual, Black Oxide, With Damper Bestvents Foundation Vent, Manual, Brown, With Damper
Bestvents 500GR Manual Foundation Vent with Damper Vestal 226 Brick Lintel Quikrete 6922-02 Concrete Quik-Tube Form
Bestvents Foundation Vent, Manual, Gray, With Damper Unique forming process develops high cross strength. Ample load-bearing capacity. Stiff in service. Free from sagging or buckling. All lintels should be shored until mortar has cured. Coated with black corrosion-resistant paint. Made in USA. Used by homeowners and residential contractors to create everything from lamp post and mailbox bases to deck supports. Easy-to-use cardboard tube, scaled-down version of rigid fiber forms that heavy-construction contractors use. Pour concrete in form, let it dry, then cut away form. Length can be cut down if needed.
Vestal 230 Brick Lintel Gaf BVSII Block Foundation Vent Quik-Tube 6922-03 Building Form
Unique forming process develops high cross strength. Ample load-bearing capacity. Stiff in service. Free from sagging or buckling. All lintels should be shored until mortar has cured. Coated with black corrosion-resistant paint. Made in USA. Aluminum vanes, lintel not required. For block, brick, or frame construction. Recommended for high-level ventilation. Galvanized steel and aluminum. 8" x 16" x 2-3/4". Used by homeowners and residential contractors to create everything from lamp post and mailbox bases to deck supports. Easy-to-use cardboard tube, scaled-down version of rigid fiber forms that heavy-construction contractors use. Pour concrete in form, let it dry, then cut away form. Length can be cut down if needed.
Vestal 236 Brick Lintel Bestvents A-ELBLACK Foundation Vent Bestvents 304LGR Foundation Vent
Unique forming process develops high cross strength. Ample load-bearing capacity. Stiff in service. Free from sagging or buckling. All lintels should be shored until mortar has cured. Coated with black corrosion-resistant paint. Made in USA. With 18" lintel for new construction. Fits standard 8" x 16" vent openings. High density thermo-plastic construction. Automatically opens at 70 degrees Fahrenheit, closes at 40 (approximately). Key working mechanism, bi-metal coil, fully enclosed by protective cover. No electrical hook-up required. Stainless steel and corrosion resistant metal parts. 62 square inches net free area. Heavy-duty aluminum mesh screen, front and back. 8" x 16". With 18" lintel for new construction. Fits standard 8" x 16" vent openings. High density thermo-plastic construction. Automatically opens at 70 degrees Fahrenheit, closes at 40 (approximately). Key working mechanism, bi-metal coil, fully enclosed by protective cover. No electrical hook-up required. Stainless steel and corrosion resistant metal parts. 62 square inches net free area. Heavy-duty aluminum mesh screen, front and back. 8" x 16".
Bestvents A-ELBROWN Foundation Vent Vestal 240 Brick Lintel Vestal 246 Brick Lintel
With 18" lintel for new construction. Fits standard 8" x 16" vent openings. High density thermo-plastic construction. Automatically opens at 70 degrees Fahrenheit, closes at 40 (approximately). Key working mechanism, bi-metal coil, fully enclosed by protective cover. No electrical hook-up required. Stainless steel and corrosion resistant metal parts. 62 square inches net free area. Heavy-duty aluminum mesh screen, front and back. 8" x 16". Unique forming process develops high cross strength. Ample load-bearing capacity. Stiff in service. Free from sagging or buckling. All lintels should be shored until mortar has cured. Coated with black corrosion-resistant paint. Made in USA. Unique forming process develops high cross strength. Ample load-bearing capacity. Stiff in service. Free from sagging or buckling. All lintels should be shored until mortar has cured. Coated with black corrosion-resistant paint. Made in USA.
Bestvents B-EBLACK(MB) Foundation Vent Energy Saver 306MWH Foundation Vent With Damper Energy Saver B-E BROWN (MB) Foundation Vent With Damper
Replaces old-style manual vents. Fits standard 8" x 16" vent openings. Automatically opens at 70 degrees Fahrenheit and closes at 40 (approximately). The key mechanism, bi-metal coil, fully enclosed in protective cover. Stainless steel compression spring with 1 adjustable screw for easy installation. 65 square inch net free area. High-density thermo-plastic construction. Stainless steel and corrosion resistant metal parts. Heavy-duty aluminum mesh screen, front and back. No electrical hook-up required. 8" x 16". Replaces old-style manual vents. Fits standard 8" x 16" vent openings. Automatically opens at 70 degrees Fahrenheit and closes at 40 (approximately). The key mechanism, bi-metal coil, fully enclosed in protective cover. Stainless steel compression spring with 1 adjustable screw for easy installation. 65 square inch net free area. High-density thermo-plastic construction. Stainless steel and corrosion resistant metal parts. Heavy-duty aluminum mesh screen, front and back. No electrical hook-up required. 8" x 16". Replaces old-style manual vents. Fits standard 8" x 16" vent openings. Automatically opens at 70 degrees Fahrenheit and closes at 40 (approximately). The key mechanism, bi-metal coil, fully enclosed in protective cover. Stainless steel compression spring with 1 adjustable screw for easy installation. 65 square inch net free area. High-density thermo-plastic construction. Stainless steel and corrosion resistant metal parts. Heavy-duty aluminum mesh screen, front and back. No electrical hook-up required. 8" x 16".
Bestvents 315CBL Replacement Foundation Vent Energy Saver 306MGR Foundation Vent With Damper Bestvents 315CBR Replacement Foundation Vent
With 1"W frame for new construction or to replace old foundation vents. Fits standard 8" x 16" concrete block opening. Operates automatically without electricity; opens at 70 degrees Fahrenheit, closes at 40 (approximately). Simple homeowner/DIYer snap-in installation, with color matched set screws for additional stability. Removable back for maintenance and cleaning. Screened with 1/8" heavy-duty aluminum mesh. High-density thermo-plastic construction. All metal parts are corrosion resistant stainless steel. Aluminum louvers. No mortar required for installation. 62 square inch net free area. 8" x 16". Replaces old-style manual vents. Fits standard 8" x 16" vent openings. Automatically opens at 70 degrees Fahrenheit and closes at 40 (approximately). The key mechanism, bi-metal coil, fully enclosed in protective cover. Stainless steel compression spring with 1 adjustable screw for easy installation. 65 square inch net free area. High-density thermo-plastic construction. Stainless steel and corrosion resistant metal parts. Heavy-duty aluminum mesh screen, front and back. No electrical hook-up required. 8" x 16". With 1"W frame for new construction or to replace old foundation vents. Fits standard 8" x 16" concrete block opening. Operates automatically without electricity; opens at 70 degrees Fahrenheit, closes at 40 (approximately). Simple homeowner/DIYer snap-in installation, with color matched set screws for additional stability. Removable back for maintenance and cleaning. Screened with 1/8" heavy-duty aluminum mesh. High-density thermo-plastic construction. All metal parts are corrosion resistant stainless steel. Aluminum louvers. No mortar required for installation. 62 square inch net free area. 8" x 16".
Bestvents 315CGR Replacement Foundation Vent Gaf FVRABL Foundation Vent Bestvents 201CA Metal Slider Foundation Vent
With 1"W frame for new construction or to replace old foundation vents. Fits standard 8" x 16" concrete block opening. Operates automatically without electricity; opens at 70 degrees Fahrenheit, closes at 40 (approximately). Simple homeowner/DIYer snap-in installation, with color matched set screws for additional stability. Removable back for maintenance and cleaning. Screened with 1/8" heavy-duty aluminum mesh. High-density thermo-plastic construction. All metal parts are corrosion resistant stainless steel. Aluminum louvers. No mortar required for installation. 62 square inch net free area. 8" x 16". Hi-density polyethylene construction. Auto-open at 70 degrees Fahrenheit, closes at 40 degrees to lower risk of frozen pipes and save energy. Replaces manual vent. Snap-in installation. 57 sq. in. NFVA. 16'' x 8''. Bestvents Foundation Vent, Metal Slider, Cast Aluminum
FORM CONCRETE FOOT PLASTC 22IN FORM CONCRETE FOOT PLASTC 28IN Marshalltown TWR26 Tie Wire Reel
Fastest, easiest way to form concrete footings; patented square footing form decreases cycle time, labor and material cost; can be sized, attached to construction tube, placed in excavated hole and backfilled. Can be used with rebar to reinforce footing or column if needed. Fastest, easiest way to form concrete footings; patented square footing form decreases cycle time, labor and material cost; can be sized, attached to construction tube, placed in excavated hole and backfilled. Can be used with rebar to reinforce footing or column if needed. Made of lightweight durable plastic to give many years of trouble free use. Fits any standard size belt. Accomodates all types of tie wire.
Vestal 250 Brick Lintel ANGLE 2X4IN TRIPLE ZINC 12GA  Vestal 260 Brick Lintel
Unique forming process develops high cross strength. Ample load-bearing capacity. Stiff in service. Free from sagging or buckling. All lintels should be shored until mortar has cured. Coated with black corrosion-resistant paint. Made in USA. Provides a 90? connection for medium/heavy duty applications; stronger than angled nailing or screw fastening; help ensure joints are consistently straight and strong. Unique forming process develops high cross strength. Ample load-bearing capacity. Stiff in service. Free from sagging or buckling. All lintels should be shored until mortar has cured. Coated with black corrosion-resistant paint. Made in USA.
Marshalltown TWR19 Tie Wire Reel USP Lumber RT7A Double Plate Hurricane/Seismic Anchor Vestal 270 Brick Lintel
Constructed of light weight aluminum. Designed for left or right hand use. Large knob provides smooth operation. Accommodates all types of tie wire rolls. Fits any standard size belt. Ties trusses and rafters to top plates. Can use to tie wood framing members to resist uplift and lateral forces. Seismic, tested for lateral movement. Triple Zinc anchors (310.1573) requires 8d HDG nails and Gold Coat anchors (947.3265) requires N8-GC nails.  Meets ICC-ES ESR-1465 and FL817 codes. For additional information including allowable loads and number of fasteners, please see USP Lumber Connectors charts in the Orgill paper catalog R7 Reference Pages. Unique forming process develops high cross strength. Ample load-bearing capacity. Stiff in service. Free from sagging or buckling. All lintels should be shored until mortar has cured. Coated with black corrosion-resistant paint. Made in USA.
USP Lumber JA1 Joist Angle Acorn BT174-5M Bar Tie USP Lumber BL Corner Brace
Used to strengthen framing in various applications or to support joists where stirrup style hangers cannot be installed. Requires 10d x 1-1/2 nails for installation. Meets ICBO, SBCCI, BOCA - NER 505; L.A. City RR25303, DSA PA-076; and Dade County, FL 98-0421.06 codes. For additional information including allowable loads and number of fasteners, Please See USP Lumber Connectors charts in the Orgill paper catalog R7 Reference Pages. 16 Gauge. Used to secure the position of rebar during concrete pouring. Reinforces 90 degree wood-to-wood connections. G90 galvanizing finish. Requires 16d nails for installation. 12 Gauge.
ANGLE 2X6IN TRIPLE ZINC 12GA  Acorn BT175-5M Bar Tie FORM CONCRETE FOOT PLASTC 32IN
Provides a 90? connection for medium/heavy duty applications; stronger than angled nailing or screw fastening; help ensure joints are consistently straight and strong. Used to secure the position of rebar during concrete pouring. Fastest, easiest way to form concrete footings; patented square footing form decreases cycle time, labor and material cost; can be sized, attached to construction tube, placed in excavated hole and backfilled. Can be used with rebar to reinforce footing or column if needed.
USP Lumber MP34 Framing Angle USP Lumber RT3A Double Plate Hurricane/Seismic Anchor USP Lumber NP Truss Mending Plate
Use for joist/header installations. Does not have tabs. G90 galvanizing finish. Requires 8d x 1-1/2 nails. Meets SBCCI, BOCA - NER 505; ICBO 5736; DSA PA-076; Dade County, FL 01-0417.11; and  L.A. City RR25303 codes. 18 Gauge. Ties trusses and rafters to top plates either left or right handed. Can use to tie wood framing members to resist uplift and lateral forces. Seismic, tested for lateral movement. G90 galvanizing finish. Requires 8d nails for installation in plate and rafter/truss. Meets ICC-ES ESR-1465 and FL817 codes. 18 Gauge. Joins flat surfaces of 2 or more wood members. Not for structural use or use in truss assembly. G90 galvanizing finish. Use nails appropriate for intended use. Holes sized for 8d common or 8d x 1-1/2" nails. 20 Gauge.
Acorn BT176-1M/5M Bar Tie USP Lumber JA1-TZ Framing Angle USP Lumber KHL33 Heavy Joist Angle
Used to secure the position of rebar during concrete pouring. Used to strengthen framing in various applications or to support joists where stirrup style hangers cannot be installed. Requires 10d x 1-1/2 nails for installation. Meets ICBO, SBCCI, BOCA - NER 505; L.A. City RR25303, DSA PA-076; and Dade County, FL 98-0421.06 codes. For additional information including allowable loads and number of fasteners, Please See USP Lumber Connectors charts in the Orgill paper catalog R7 Reference Pages. 16 Gauge. Designed for heavy-duty reinforcement of 90 degree framing intersections. USP primer finish. Requires (2) 5/8" bolts for installation. Meets ICBO 2725, L.A. City RR 25104. 7 Gauge.
U-CLIP 2X-2X TRIPLE ZINC      USP Lumber RT Hurricane/Seismic Anchor USP Lumber ST1-TZ Mud Sill Anchor
A clip connects a 2x wood member to the face of another wood member; 20 gauge; G-185 galvanizing finish; requires (6) USP LumberLok LL915 (#9 x 1-3/8" long) wood screws not included. Ties trusses and rafters to top plates. Can use to tie wood framing members to resist uplift and lateral forces. Seismic, tested for lateral movement. Triple Zinc anchors (310.1573) requires 8d HDG nails and Gold Coat anchors (947.3265) requires N8-GC nails.  Meets ICC-ES ESR-1465 and FL817 codes. For additional information including allowable loads and number of fasteners, please see USP Lumber Connectors charts in the Orgill paper catalog R7 Reference Pages. For securing mudsills and framing into concrete slabs or poured stemwalls. Not for block installation or securing concrete sections together between cold joints. Features prebent base flange for proper anchoring into concrete. Use a minimum of 2 anchors per mudsill within 12" of the end of each section. Meets  NER 530 codes. For additional information including allowable loads and fasteners, please see USP Lumber Connectors charts in the Orgill paper catalog R7 Reference Pages.
Acorn BT178-5M Bar Tie USP Lumber RT8A Double Plate Hurricane/Seismic Anchor USP Lumber NP35 Truss Mending Plate
Used to secure the position of rebar during concrete pouring. Ties trusses and rafters to top plates. Can use to tie wood framing members to resist uplift and lateral forces. Seismic, tested for lateral movement. Triple Zinc anchors (310.1573) requires 8d HDG nails and Gold Coat anchors (947.3265) requires N8-GC nails.  Meets ICC-ES ESR-1465 and FL817 codes. For additional information including allowable loads and number of fasteners, please see USP Lumber Connectors charts in the Orgill paper catalog R7 Reference Pages. Joins flat surfaces of 2 or more wood members. Not for structural use or use in truss assembly. G90 galvanizing finish. Use nails appropriate for intended use. Holes sized for 8d common or 8d x 1-1/2" nails. 20 Gauge.
Bestvents PMS-1BLACK Foundation Vent Bestvents PMS-1BROWN Foundation Vent Bestvents PMS-1 Foundation Vent
With 18"L x 1 3/4"W built-in lintel for new block, brick or frame foundation construction. Durable polypropylene construction. 40 square inches net free area. 1/8" aluminum screen. 8" x 16". With 18"L x 1 3/4"W built-in lintel for new block, brick or frame foundation construction. Durable polypropylene construction. 40 square inches net free area. 1/8" aluminum screen. 8" x 16". With 18"L x 1 3/4"W built-in lintel for new block, brick or frame foundation construction. Durable polypropylene construction. 40 square inches net free area. 1/8" aluminum screen. 8" x 16".
USP Lumber TPP24 Prong Mending Plate USP Lumber CSH-TZ Concealed Stringer Hanger USP Lumber RT15 Double Plate Hurricane/Seismic Anchor
Prong plates with straight prongs. Joins flat surfaces of 2 or more wood members. Not for structural use OR use in truss assembly; no load ratings assigned. G90 galvanizing finish. 22 Gauge. Concealed stair stringer hanger provides a method of connecting a stringer with a hidden hanger. The seat of the hanger is adjustable to match the slope of the stair stringer. Triple Zinc finish. Requires (8) 10d x 1-1/2 HDG nails for header and (5) 10d x 1-1/2 HDG nails for joist. 18 Gauge. Pending IAPMO-ES evaluation. Ties trusses and rafters to top plates. Can use to tie wood framing members to resist uplift and lateral forces. Seismic, tested for lateral movement. Triple Zinc finish requires 8d HDGnails for installation in plate and rafter/truss and Gold Coat anchor requires N8-GC nails. 1-9/16"W x 2-5/8"H opening. Meets ICC-ES ESR-1465, FL817 and Dade County, FL 07-0306.10 codes. For additional information including allowable loads and number of fasteners, please see USP Lumber Contractors charts in the Orgill paper catalog R7 for reference pages. 18 GAUGE - 5-1/4"H.
USP Lumber PL4 Protection Plate USP Lumber TPP Truss Mending Plate USP Lumber MPA1 Framing Angle
Easy-to-install for protecting plumbing and power or communication wiring from screw or nail penetration. Conforms to National Electric Code. 16 Gauge - 1/16" Thickness. Prong plates with straight prongs. Joins flat surfaces of 2 or more wood members. Not for structural use OR use in truss assembly; no load ratings assigned. G90 galvanizing finish. 22 Gauge. Use for joist to header, rafter to plate, stud to plate or 1" foamboard installations. Achieves continuous load path in high wind and seismic resistant construction. Enables quick field adjustments for 2 and 3-way connections. Tabs enable two and three-way connections. Bend tabs only once. Requires 8d x 1-1/2 nails. Meets SBCCI, BOCA - NER 505, ICBO 5736, DSA PA-076, Dade County, FL 01-417.11 and  L.A. City RR25303 codes. For additional information including allowable loads and number of fasteners, Please See USP Lumber Connectors charts in the Orgill paper catalog R7 Reference Pages.
USP Lumber KNS1 Protection Plate USP Lumber RT Hurricane/Seismic Anchor ANGLE 2X-2X TRIPLE ZINC 16GA
Easy to install for protecting plumbing and power or communication wiring from screw or nail penetration. 16 gauge, 1/16" thick. Conforms to National Electric Code. Ties trusses and rafters to top plates. Can use to tie wood framing members to resist uplift and lateral forces. Seismic, tested for lateral movement. Triple Zinc finish requires 8d HDGnails for installation in plate and rafter/truss and Gold Coat anchor requires N8-GC nails. 1-9/16"W x 2-5/8"H opening. Meets ICC-ES ESR-1465, FL817 and Dade County, FL 07-0306.10 codes. For additional information including allowable loads and number of fasteners, please see USP Lumber Contractors charts in the Orgill paper catalog R7 for reference pages. 18 GAUGE - 5-1/4"H. An angle connects two 2x wood members at 90? angles; G185 galvanizing finish; requires (8) USP LumberLok LL915 (#9 x 1-3/8" long) wood screws not included.
USP Lumber MPA1 Framing Angle Gaf PFV1 Power Foundation Vent USP Lumber NP37 Truss Mending Plate
Use for joist to header, rafter to plate, stud to plate or 1" foamboard installations. Achieves continuous load path in high wind and seismic resistant construction. Enables quick field adjustments for 2 and 3-way connections. Tabs enable two and three-way connections. Bend tabs only once. Requires 8d x 1-1/2 nails. Meets SBCCI, BOCA - NER 505, ICBO 5736, DSA PA-076, Dade County, FL 01-417.11 and  L.A. City RR25303 codes. For additional information including allowable loads and number of fasteners, Please See USP Lumber Connectors charts in the Orgill paper catalog R7 Reference Pages. Polymer construction, enclosure with with steel screen. Easy installation, fits in traditional foundation vent openings with simple plug and go operation. Up to 330 CFM/airflow to eliminate moisture during peak times, 1/70th hp, 60 watts, 120 VAC. Effectively removes damaging excess moisture from crawl spaces and basements, while helping to prevent the growth of mold. UL and ETL Listed. Joins flat surfaces of 2 or more wood members. Not for structural use or use in truss assembly. G90 galvanizing finish. Use nails appropriate for intended use. Holes sized for 8d common or 8d x 1-1/2" nails. 20 Gauge.
USP Lumber BL Reinforcement Corner Brace Lomanco PCV1 Powered Crawlspace Vent USP Lumber ST2-TZ Mud Sill Anchor
Reinforces 90 degree wood-to-wood connections. G90 galvanizing finish. Requires 16d nails for installation. 12 Gauge. Quiet 110 CFM ball bearing motor. Dries crawlspace gradually. Humidity sensor. Thermostat shuts fan off at low temperatures. U.L. approved. Mounts behind foundation vent for invisible operation. Ventilates 1650 cubic feet. 8" x 16". For securing mudsills and framing into concrete slabs, poured stemwalls, or concrete block. Not for securing concrete sections together between cold joints. Features prebent base flange for proper anchoring into concrete. Use a minimum of 2 anchors per mudsill within 12" of the end of each section. Meets NER 530 codes. For additional information including allowable loads and fasteners, please see USP Lumber Connectors charts in the Orgill paper catalog R7 Reference Pages.
USP Lumber RT16A Double Plate Hurricane/Seismic Anchor LATE MNDG 13/16X3-1/2IN       Quikrete 6917-03 Expansion Joint
Anchor tie trusses and rafters to top plates and may be used to tie wood framing members to resist uplift and lateral forces. Typical Truss/rafter to double plate installation. Requires Meet ICC-ES ESR-1465 and FL817 codes. Prong plates with straight prongs. Joins flat surfaces of 2 or more wood members. Not for structural use OR use in truss assembly; no load ratings assigned. G90 galvanizing finish. 22 Gauge. Used where concrete meets concrete for a stronger bond. Expansion joint filler made from resilient wood to prevent damage during expansion and contraction of concrete. Used in driveways, sidewalks, and patios, between concrete slabs and to separate slabs from structures. Meets requirements of ASTM D 1751.
Gaf LW1 Grill Foundation Vent with Damper USP Lumber SCA Stair Angle USP Lumber SCA Stair Angle
Die-cast aluminum, grill style. Designed for nailing to floor joists or as a foundation block replacement. 8" x 16" . Simplifies stair construction and eliminate the need to calculate and notch stair stringers. Stronger and safer than wood blocking, and the angle and fasteners are hidden from view. Use the SCA9 for single 2x10 stair treads and SCA10 for double 2 x 6 stair treads. Requires 1/4" x 1-1/2" lag bolts. Meets ICC-ES ESR-1280, FL11664 and L.A. City RR25749 codes. For additional information on installation, please see USP Lumber Connectors charts in the Orgill paper catalog R7 Reference Pages. Simplifies stair construction and eliminate the need to calculate and notch stair stringers. Stronger and safer than wood blocking, and the angle and fasteners are hidden from view. Use the SCA9 for single 2x10 stair treads and SCA10 for double 2 x 6 stair treads. Requires 1/4" x 1-1/2" lag bolts. Meets ICC-ES ESR-1280, FL11664 and L.A. City RR25749 codes. For additional information on installation, please see USP Lumber Connectors charts in the Orgill paper catalog R7 Reference Pages.
Deacero 5689/RBTW35 Coil Tie Wire USP Lumber WE44-TZ Wet Post Anchor USP Lumber A3 Framing Angle
Center hole (semi-square with round corners) enables roll to be quickly reversed for right or left hand use. Roll slips quickly onto the reel, yet easily rewinds. Continuous rolls and uniform diameters. Ideal to tie rods. Meets ASTM-A-853. 16.5 gauge. 3.5 pound coil. Secures posts to concrete in light-duty and medium-duty applications such as patio covers, carports or decks. Formed, one-piece design includes embossing for additional lateral strength. Not  for fence posts or other unrestrained (not fixed or fastened at top) applications. Not designed to resist overturning (moment) loads. Requires (2) 1/2" HDG bolts or (12) HDG nails for fastening to post. Meets SBCCI, BOCA - NER 530 & NER 608, ICBO 5700, ICBO 2039, ICBO 5531, FL821, FL822, L.A. City RR 25337, and DSA PA-076 codes. For additional information including allowable loads and fasteners, Please See USP Lumber Connectors charts in the Orgill paper catalog R7 Reference Pages. Eliminates toenailing and increases strength. Requires 10d x 1-1/2" nails for installation. 1-7/16"W1 X 1-7/16"W2 X 2-3/4"L - 18 GAUGE. Meets ICC-ES ESR-2104, FL820 and L.A. City RR25745 codes.
USP Lumber RT10 Double Plate Hurricane/Seismic Anchor Gaf LW1L Grill Foundation Vent with 1 3/8 in lintel and Damper USP Lumber HCPRS Hurricane/Seismic Anchor
Used to tie wood framing members to resist uplift and lateral forces. G90 galvanizing finishing. Requires 8d nails for installation. Meets ICC-ES ESR-1465, FL817 and Dade County, FL 07-0306.10 codes. 18 Gauge. Designed for nailing to floor joists or as a foundation block replacement. With 1-3/8"W lintel. 8" x 16". Used to tie trusses and rafters to top plates, and may be used to tie wood framing members to resist uplift and lateral forces. G90 galvanizing finish. 1-9/16"W opening. Meets ICC-ES ESR-1881, FL821 and L.A. City RR25779 codes. 18 Gauge - 5-1/4"W.
USP Lumber NP39 Truss Mending Plate Gaf 500 Grate Foundation Vent with Shutter USP Lumber AC9-TZ Framing Angle
Joins flat surfaces of 2 or more wood members. Not for structural use or use in truss assembly. G90 galvanizing finish. Use nails appropriate for intended use. Holes sized for 8d common or 8d x 1-1/2" nails. 20 Gauge. Die-cast aluminum with lintel for foundation block construction. Positive open/close damper action. Lowers risk of frozen pipes, saves energy, and helps prevent foundation decay. 8" x 16". For general-purpose reinforcements of many framing connections. G185 galvanized finish. Can be used in both new construction and retrofit applications. Staggered nail patterns reduce wood splitting and allows installation on both sides of the supported member. Triple Zinc clips require 10d HDG or 16d HDG nails.  Meets ICC-ES ESR-2104, FL820 and L.A. City RR25745 codes. For additional information including allowable loads and number of fasteners, please see USP Structural Connectors charts in the Orgill paper catalog R7 Reference Pages.
USP Lumber ICPL58-TZ Protection Plate USP Lumber ICPL516-TZ Protection Plate USP Lumber MP9-TZ Framing Angle
Easy-to-install plates protect plumbing and power/communication wiring from nail or screw penetration. 16 Gauge - 1/16" Thickness. Easy-to-install plates protect plumbing and power/communication wiring from nail or screw penetration. 16 Gauge - 1/16" Thickness. May be field adjusted by hand from 0 to 135 degrees, giving framers and do-it-yourselfers flexibility in applications. Bend angle only once. G90 galvanized finish. 10d HDG nails required for installation. Meets SBCCI, BOCA - NER 530, ICBO 5700, FL822, L.A. City RR 25337, DSA PA-06 codes.
USP Lumber AC5-TZ Framing Angle Lomanco 179 Foundation Vent with 3-Slide Shutter USP Lumber JNP24 Joiner Nail Mending Plate
For general-purpose reinforcements of many framing connections. G185 galvanized finish. Can be used in both new construction and retrofit applications. Staggered nail patterns reduce wood splitting and allows installation on both sides of the supported member. Triple Zinc clips require 10d HDG or 16d HDG nails.  Meets ICC-ES ESR-2104, FL820 and L.A. City RR25745 codes. For additional information including allowable loads and number of fasteners, please see USP Structural Connectors charts in the Orgill paper catalog R7 Reference Pages. Heavy die-cast rust-free aluminum. 8" x 8" perma-coated aluminum screen attached. 3-slide shutter provides maximum ventilation. 56 square inches of net free area. 8" x 16". Prong plates with angled, hammer-in prongs. Joins flat surfaces of 2 or more wood members. G90 galvanizing finish. Not intended for structural use OR in truss assembly. No load ratings assigned. 18 Gauge.
USP Lumber AC Framing Angle USP Lumber JNP28 Joiner Nail Mending Plate
For general-purpose reinforcements of many framing connections. G185 galvanized finish. Can be used in both new construction and retrofit applications. Staggered nail patterns reduce wood splitting and allows installation on both sides of the supported member. Triple Zinc clips require 10d HDG or 16d HDG nails.  Meets ICC-ES ESR-2104, FL820 and L.A. City RR25745 codes. For additional information including allowable loads and number of fasteners, please see USP Structural Connectors charts in the Orgill paper catalog R7 Reference Pages. Prong plates with angled, hammer-in prongs. Joins flat surfaces of 2 or more wood members. G90 galvanizing finish. Not intended for structural use OR in truss assembly. No load ratings assigned. 18 Gauge.
   
 
1