Home > HARDWARE > CONSTRUCTION HARDWARE > FLOORING /ACCESSORIES > CORK ROLL
Choose a sub category:
CEILING TILES/CEILING PANELS FLOOR TILE FLOOR TILE
CEILING TILE HARDWARE ROSIN PAPER ROSIN PAPER
FLOOR SHIELDING FLOOR SHIELDING LAMINATED FLOORING
LAMINATED FLOORING CORK ROLL CORK ROLL
FLOORING INSTALLATION TOOLS FLOORING INSTALLATION TOOLS
Sort By:
1
Amerimax 29029 Downspout Band Amerimax 2522919 Downspout Band Amerimax 27229 Downspout Band
Amerimax Downspout Band, Suitable For Use With: 2 X 3 in and 3 X 4 in Downspouts, Steel, Galvanized, Used to Hold Downspouts in Place Amerimax Downspout Band, Suitable For Use With: 2 X 3 in and 3 X 4 in Downspouts, Aluminum, Brown, Used to Hold Downspouts in Place Amerimax Downspout Band, Suitable For Use With: 2 X 3 in and 3 X 4 in Downspouts, Aluminum, White, Used to Hold Downspouts in Place
Debri-Shield AW202 Downspout Bracket DuraSpout AB202 Downspout Bracket Amerimax 29206 Right Hand Gutter End Cap
Used to support DuraSpout downspout at either the offset elbow, coupler, or discharge spout. Never needs painting. Will not rust, rot or chip. Used to support DuraSpout downspout at either the offset elbow, coupler, or discharge spout. Never needs painting. Will not rust, rot or chip. Amerimax Gutter End Cap, Right Hand, 28 ga Thickness, Suitable For Use With: 5 in K Style Gutter System, Steel, Galvanized
Amerimax 29205 Left Hand Gutter End Cap Amerimax 2520619 Right Hand Gutter End Cap Amerimax 2520519 Left Hand Gutter End Cap
Amerimax Gutter End Cap, Left Hand, 28 ga Thickness, Suitable For Use With: 5 in K Style Gutter System, Steel, Galvanized Amerimax Gutter End Cap, Right Hand, Suitable For Use With: 5 in K Style Gutter System, Aluminum, Brown Amerimax Gutter End Cap, Left Hand, Suitable For Use With: 5 in K Style Gutter System, Aluminum, Brown
Amerimax 27006 Right Hand Gutter End Cap Amerimax 27005 Left End Gutter End Cap Billy Penn 05568 Type K Outlet Tube
Amerimax Gutter End Cap, Right Hand, Suitable For Use With: 5 in K Style Gutter System, Aluminum, White Amerimax Gutter End Cap, Left End, 5 in Length, Suitable For Use With: Left End of Gutter Run, Aluminum, White Billy Penn Outlet Tube, Type K, 2 in Width X 3 in Depth, Suitable For Use With: Gutter System, Aluminum, Enamel Coated
Genova HRW108 Gutter Strap Hanger Raingo RB202 Downspout Bracket Raingo RW202 Downspout Bracket
Used where fascia board does not exist or is not vertical. Tang nailed under shingles then screwed to support brackets and slip joints. Front hinge snapped over button on part No.RW105 and part No.RW106. To support downspout at either the offset elbow coupler or discharge spout. (Estimated 70 pieces per 1000' of gutter) To support downspout at either the offset elbow coupler or discharge spout. (Estimated 70 pieces per 1000' of gutter)
DuraSpout AW302 Downspout Bracket Raingo AW201B Type B Downspout Elbow Raingo AB201B Type B Downspout Elbow
Used to support DuraSpout downspout at either the offset elbow, coupler, or discharge spout. Never needs painting. Will not rust, rot or chip. Used with Repla K system or as a replacement for metal. Used where the downspout changes in any direction. Turns 112 degrees for offsets and discharge spouts. Used with Repla K system or as a replacement for metal. Used where the downspout changes in any direction. Turns 112 degrees for offsets and discharge spouts.
DuraSpout AW203 Downspout Coupler DuraSpout AB203 Downspout Coupler Genova AW108 Repla K Gutter Strap Hander
Connects two lengths of downspout. Connects two lengths of downspout. Used where fascia board does not exist or is not vertical. Attaches to roof under shingles and screwed to support brackets.
SCREW WOOD BLACK NO7X3/4IN    SCREW WOOD BLACK NO8X3/4IN    SCREW WOOD BLACK NO9X3/4IN
Heavy duty reinforcement. Reinforce a variety of joints, seams and cracks. Designed for use with black reinforcement Items with round recessed holes sized for #7 screws. Black powder coated heads to give decorative reinforcement pieces a finished look. Use cross recess screwdriver size #2. Visual-pack. National Hardware Wood Screw, Series: SCRFLT, NO 8 x 3/4 Screw, Flat Head, Phillips Drive, Black National Hardware Wood Screw, Series: SCRFLT, NO 9 x 3/4 Screw, Flat Head, Phillips Drive, 14 TPI Full Length Thread, 11/32 in Dia Head, Steel, Black
Raingo AW221 Type A to B Downspout Elbow Raingo AB221 Type A to B Downspout Elbow Stanley 266445 T-Plate
Used with a B-style Elbow to create an offset on side of house. Used with a B-style Elbow to create an offset on side of house. Use #8 flat head screws. Designed to join two pieces of wood together at 90 degree angles, such as on screens and frames. Screw holes are countersunk. Drill a pilot hole with a 3/32" sized drill bit when using wood screws.
Amerimax 37084 Front Side Flexible Gutter Elbow Stanley 116BC T-Plate 4 in L x 3/4 in W x 4 in H x 0.07 in T National Hardware V858S Lag Screw
Amerimax Gutter Elbow, Front, Side, Flexible, Amerimax, 8 - 18 in Extended Length, Suitable For Use With: 2 X 3 in K-Style Downspout, 4 in and 5 in Gutters, Vinyl, White, Used to Connect Gutter or Drainpipe to Downspout Use #8 flat head screws. Designed to join two pieces of wood together at 90 degree angles, such as on screens and frames. Screw holes are countersunk. Drill a pilot hole with a 3/32" sized drill bit when using wood screws. National Hardware Lag Screw, Series: V858S, 5/16 in Screw, 1-1/2 in Length, Hexagonal Head, Gimlet Point, Steel, Zinc Plated, Satin Black, BHMA A138.18 Certified
National Hardware V286S Wood Screw National Hardware V286S Wood Screw National Hardware 21BC Replacement Gate Latch Bar
National Hardware Wood Screw, Series: V286S, NO 12 Screw, 1-1/4 in Length, Flat Head, Steel, Zinc Plated, BHMA A138.18 Certified National Hardware Wood Screw, Series: V286S, NO 12 Screw, 1-1/4 in Length, Flat Head, Phillips Drive, Steel, Black, BHMA A138.18 National Hardware Gate Latch Bar, Replacement, Series: 21BC, 4 in Overall Height, Suitable For Use With: Self-Closing Gate Latches, Steel, Zinc Plated, BHMA A138.18
Genova AB101K Repla K Right Hand Gutter End Cap Genova AB102K Repla K Left Hand Gutter End Cap Genova AW101K Repla K Right Hand Gutter End Cap
For end of gutter run. For end of gutter run. For end of gutter run.
BOLT LAG BLACK 1/4X1-1/2IN    Raingo RB201 Standard Downspout Elbow Raingo RW201 Standard Downspout Elbow
National Hardware Lag Bolt, Series: V1863, Heavy Duty, 1/4 in Thread, 1-1/2 in Overall Length, Hex Head, 3/16 in Height x 10 mm Width Head, Steel, Powder Coated, Black Used where the square downspout changes in any direction. Estimated 100 pieces per 1000' of gutter. Used where the square downspout changes in any direction. Estimated 100 pieces per 1000' of gutter.
Genova AW102K Repla K Left Hand Gutter End Cap Amerimax 2526519 Type B Square Corrugated Gutter Side Elbow Amerimax 2526419 Type A Square Corrugated Gutter Front Elbow
For end of gutter run. Amerimax Gutter Side Elbow, Type B, Square Corrugated, 75 deg, 2 Width X 3 in Depth, Suitable For Use With: K Style Gutter System, Aluminum, Semi Gloss, Brown Amerimax Gutter Front Elbow, Type A, Square Corrugated, 75 deg, 2 Width X 3 in Depth, Suitable For Use With: K Style Gutter System, Aluminum, Brown
Amerimax 27064 Type A Square Corrugated Front Gutter Elbow Amerimax 27065 Type B Square Corrugated Side Gutter Elbow Amerimax 29209 Slip Joint Gutter Connector
Amerimax Gutter Elbow, Type A, Square, Corrugated, Front, Amerimax, 75 deg, Suitable For Use With: 2 X 3 in K-Style Downspout, Aluminum, Semi-Gloss/Baked-On, White Amerimax Gutter Elbow, Type B, Square, Corrugated, Side, Amerimax, 75 deg, Suitable For Use With: 2 X 3 in K-Style Downspout, Aluminum, Semi-Gloss/Baked-On, White Amerimax Gutter Connector, Slip Joint, Suitable For Use With: 5 in K Style Gutter System, Steel, Galvanized, Used to Join 2 Pieces of 5 in Gutter Together
Raingo RB106H Heavy Load Gutter Bracket Raingo RW106H Heavy Load Gutter Bracket Amerimax 27209 Slip Joint Gutter Connector
Basic gutter support fitting, installed every 30" of gutter length. Patented button on front for alternate use with part No. RW108. (Estimated 300 pieces per 1000' of gutter). Basic gutter support fitting, installed every 30" of gutter length. Patented button on front for alternate use with part No. RW108. (Estimated 300 pieces per 1000' of gutter). Amerimax Gutter Connector, Slip Joint, Suitable For Use With: 5 in K Style Gutter System, Aluminum, White, Used to Attach 2 Pieces of Gutter, Gutters to Mitres, and Gutters to Ends with Drops
Amerimax 2520919 Slip Joint Gutter Connector Raingo RB101 Inside Gutter End Cap Raingo RB102 Outside Gutter End Cap
Amerimax Gutter Connector, Slip Joint, Suitable For Use With: 5 in K Style Gutter System, Aluminum, Brown, Used to Join 2 Pieces of 5 in Gutter Together Used with gutter fitting to make either right or left gutter stop. (Estimated 15 piece per 1000' of gutter). Used to terminate either right or left gutter end, complete with Raingo seal. (Estimated 45 pieces per 1000' of gutter).
Raingo RW102 Outside Gutter End Cap Raingo RW101 Inside Gutter End Cap Amerimax 29265 Type A Front Side Square Corrugated Gutter Elbow
Used to terminate either right or left gutter end, complete with Raingo seal. (Estimated 45 pieces per 1000' of gutter). Used with gutter fitting to make either right or left gutter stop. (Estimated 15 piece per 1000' of gutter). Amerimax Gutter Elbow, Type A, Front Side, Square Corrugated, 75 deg, 2 Width X 3 in Depth, Suitable For Use With: K Style Gutter System, Steel, Galvanized
Amerimax 29264 Type A Square Corrugated Downspout Front Elbow BOLT LAG BLACK 5/16X1-1/2IN   Genova AW106 Repla K Gutter Bracket
Amerimax Downspout Front Elbow, Type A, Square Corrugated, 75 deg, 2 Width X 3 in Depth, Suitable For Use With: K Style Gutter System, Steel, Galvanized National Hardware Lag Bolt, Series: V1863, Heavy Duty, 5/16 in Thread, 1-1/2 in Overall Length, Hex Head, 7/32 in Height x 1/2 in Width Head, Steel, Powder Coated, Black Used for support of gutter. Brackets can not be seen at ground level.
Genova AB106 Repla K Gutter Bracket Raingo RW209 Downspout Elbow Raingo RB209 Downspout Elbow
Used for support of gutter. Brackets can not be seen at ground level. 90 degree angle. Non-metallic, never needs painting. Will not rust, rot or chip. Fits anywhere downspout changes direction. 90 degree angle. Non-metallic, never needs painting. Will not rust, rot or chip. Fits anywhere downspout changes direction.
Amerimax 37064 Type A Transition Elbow BOLT LAG BLACK 3/8X1-1/2IN    Billy Penn 2616 Half Round Gutter End Cap
Amerimax Transition Elbow, Type A, 2 in Width X 3 in Depth, Suitable For Use With: 5 in K Style Gutter System, Vinyl, White National Hardware Lag Bolt, Series: V1863, Heavy Duty, 3/8 in Thread, 1-1/2 in Overall Length, Hex Head, 1/4 in Height x 9/16 in Width Head, Steel, Powder Coated, Black Billy Penn Gutter End Cap, Half Round, 5 in Length, Suitable For Use With: 5 in Half Round System, Steel, Galvanized
Raingo AW301B Type B Downspout Elbow Raingo RW207 Downspout Adapter Raingo AW301A Type A Downspout Elbow
Used with Repla K system or as a replacement for metal. Used where the downspout changes in any direction. Turns 112 degrees for offsets and discharge spouts. Adapts Raingo downspouts to 4" plastic sewer pipe or 4" Schedule 40 DWV fittings for a water-tight connection. Crushproof material. Never needs painting. Will not rust, rot or chip. Non-metallic, fits existing aluminum systems.
T-PLATE STEEL 3X3IN ZINC PLTD HINGE GATE HD ZN PLT STL 3-1/2 Amerimax 47264 Type A Square Corrugated Gutter Front Elbow
Reinforces flat surface joints, seams and cracks. Can be used to repair furniture. Amerimax Gutter Front Elbow, Type A, Square Corrugated, 75 deg, 3 in Width X 4 in Depth, Suitable For Use With: K Style Gutter System, Aluminum, White, Used to Direct Water from the Gutter and Downspouts of Home
Amerimax 47265 Type B Square Corrugated Gutter Side Elbow PULL SS                       Raingo RB105 Gutter Slip Joint
Amerimax Gutter Side Elbow, Type B, Square Corrugated, 75 deg, 3 Width X 4 in Depth, Suitable For Use With: K Style Gutter System, Aluminum, White, Used to Direct Water from the Gutter and Downspouts of Home Ideal for opening gate latch from opposite side of latch. Visual-pack. For joining 2 pieces of gutter; complete with seals, insertion marks. Patented button on front, alternate use with part No. RW108. (Estimated 90 pieces per 1000' of gutter).
Raingo RW105 Gutter Slip Joint National Hardware V116 T Plate HINGE GATE PIPE ZN PLT 1-5/8IN
TPLATES 3X3IN ZN PLT
Our Price: $4.38
For joining 2 pieces of gutter; complete with seals, insertion marks. Patented button on front, alternate use with part No. RW108. (Estimated 90 pieces per 1000' of gutter). National Hardware T Plate, Series: V116, 3 in Length, 3 in Width, 0.07 in Thickness, 3 Mounting Holes, 1/4 in Diameter Mounting Hole, Steel, Zinc Plated, BHMA A138.18
Amerimax 29051 Type C Wide Flange Gutter Outlet Billy Penn 1151 Strap Hanger HINGE GATE PIPE ZNC PLATED 2IN
Amerimax Gutter Outlet, Type C, Wide Flange, 2 in Width X 3 in Depth, Suitable For Use With: 5 in K Style Gutter System, Steel, Galvanized Billy Penn Strap Hanger, 1/2 in Round, Suitable For Use With: 5 in Half Round System, Steel, Galvanized
National Hardware BPB21 Gate Latch ADAPTER DOWNSPOUT OFFSET 2X3X4 Stanley 1161BC T-Plate 6 in L x 1-1/2 in W x 5 in H x 0.07 in T
National Hardware Gate Latch, Automatic, Series: BPB21, 4.44 in Overall Height, 2.37 in Overall Depth, Gate, Post Mounting, 0.22 in Diameter Mounting Hole, Suitable For Use With: Out Swing Gates, Doors and Animal Pens, Steel, Zinc Plated, Includes: Mounting Screws, BHMA A138.18 Offset flush fit downspout adapter; used to connect rain gutter downspouts to underground sewer piping; fits over 4" sewer pipe. Size: 2" x 3" x 4". Use 3/8" bolts and/or 16d nails. Used to support the joining of a cross beam with a support beam by application to the side. FoUr superior strength plates should be used on both sides of the joint with through bolts.
HINGE GATE HD BLK STL 3-1/4   National Hardware N223-875 Extra Heavy Gate Hinge Genova AB105K Repla K Gutter Connector
National Hardware Gate Hinge, Extra Heavy, Series: 287BC, Suitable For Use With: 2 X 4 or 4 X 4 Posts, 0.1 in Leaf Thickness, 4-1/4 in Gate Leaf, 3.05 in Frame Leaf Length, 0.326 in Pin, Fasteners: NO 12 Flat Head C-Sunk Screw, 48 lb Load Capacity, 4-1/4 in Overall Length, 4.8 in Overall Width, Hot Rolled Steel, Zinc Plated, BHMA A138.18, For Gates Used for joining two pieces of gutter.
Genova AW105K Repla K Gutter Connector RainGo RW203 Downspout Coupler Raingo RB203 Downspout Coupler
Used for joining two pieces of gutter. Used in joining 2 lengths of square downspouts. (Estimated 15 pieces per 1000' of gutter). Used in joining 2 lengths of square downspouts. (Estimated 15 pieces per 1000' of gutter).
LATCH GATE OUTSWING STL ZN PLT DOOR/GATE PITCHER PULL BLK STL National Hardware V2 Ornamental Pull
PULLS 6-1/2IN BLK
Our Price: $5.40
Provides security on inward and outward swinging doors and gates . Self latching finger tip release with cord or wire. Use padlock for added security. Screws included. Adds decorative design to doors and gates. Durable. National Hardware Ornamental Pull, Series: V2, Suitable For Use With: Gates, Cabinets, Doors and Drawers, 6-1/2 in Length, 1-1/4 in Width, Steel, Black, Zinc Plated, Includes: Mounting Lags, BHMA A138.18
T-PLATE STEEL 4X4IN ZINC PLTD National Hardware V116 T Plate LATCH GATE UNIV ZN PLATED STL
TPLATES 4X4IN ZN PLT
Our Price: $5.75
Reinforces flat surface joints, seams and cracks. Can be used to repair furniture. National Hardware T Plate, Series: V116, 4 in Length, 4 in Width, 0.07 in Thickness, 3 Mounting Holes, 1/4 in Diameter Mounting Hole, Steel, Zinc Plated, BHMA A138.18 For inward and outward swinging doors and gates. Use with padlock for added security. Screws included.
LATCH GATE UNIV PWDR COAT BLCK Billy Penn 5106 Plain Round Gutter Elbow Billy Penn 2622 Slip Joint Connector
For inward and outward swinging doors and gates. Use with padlock for added security. Screws included. Powder coated black. Billy Penn Gutter Elbow, Plain Round, 75 deg, 3 in Length X 26 ga Thickness, Steel, Galvanized Billy Penn Slip Joint Connector, Suitable For Use With: 5 in Half Round System, Steel, Galvanized
National Hardware V21 Gate Latch LATCH GATE OUTSWING BLK       Raingo RW104 Gutter Drop Outlet
National Hardware Gate Latch, Automatic, Series: V21, 4.44 in Overall Height, 2.37 in Overall Depth, Gate, Post Mounting, 0.22 in Diameter Mounting Hole, Suitable For Use With: Out Swing Gates, Doors and Animal Pens, Steel, Zinc Plated, Includes: Mounting Screws, BHMA A138.18 Provides security on inward and outward swinging doors and gates . Self latching finger tip release with cord or wire. Use padlock for added security. Screws included. Used to connect gutter with Raingo Square downspout. Complete with seals, insertion marks. (Estimated 30 pieces per 1000' per gutter).
Raingo RB104 Gutter Drop Outlet Raingo Duraspout RW144A Drop Outlet Raingo Duraspout RB144A Type A Drop Outlet
Used to connect gutter with Raingo Square downspout. Complete with seals, insertion marks. (Estimated 30 pieces per 1000' per gutter). Connects gutter with 2 x 3 Duraspout downspout. Crushproof material. Never needs painting. Will not rust, rot or chip. Non-metallic, fits most existing 2" x 3" aluminum systems. Connects gutter with 2 x 3 Duraspout downspout. Crushproof material. Never needs painting. Will not rust, rot or chip. Non-metallic, fits most existing 2" x 3" aluminum systems.
National Hardware N100-057 Ornamental Pull Genova RW205 Rust Proof Screw GATE PULL ORNAMT 10IN BLK STL
PULLS 8-3/4IN BLK
Our Price: $6.16
National Hardware Ornamental Pull, Series: V3, Suitable For Use With: Gates, Cabinets, Doors and Drawers, 8-3/4 in Length, Steel, Black, Zinc Plated, Includes: Mounting Lags, BHMA A138.18 For mounting all brackets and fittings. (Estimated 30 bags per 1000' of gutter). No. 10 x 1" rust-resistant. Adds decorative design to doors and gates.
National Hardware BPB21 Gate Latch Stanley 275487 Pipe Gate Hinge Raingo RB103 Gutter Corner
National Hardware Gate Latch, Automatic, Series: BPB21, 4.44 in Overall Height, 2.37 in Overall Depth, Gate, Post Mounting, 0.22 in Diameter Mounting Hole, Suitable For Use With: Out Swing Gates, Doors and Animal Pens, Steel, Black, Includes: Mounting Screws, BHMA A138.18 Designed as replacement hinge for tubular pipe gates. 1-5/8" hinge for 5/8" size and 2" hinge for 3/4" size. Used for 90 degree inside or outside corners. Complete with seals. Insertion marks indicate the correct gutter placement to allow for expansion. (Estimated 45 pieces per 1000' of gutter).
Raingo RW103 Gutter Corner National Hardware N223-867 Extra Heavy Gate Hinge National Hardware V22 Gate Latch
GATE HINGES 3-1/2IN BLK
Our Price: $6.80
Used for 90 degree inside or outside corners. Complete with seals. Insertion marks indicate the correct gutter placement to allow for expansion. (Estimated 45 pieces per 1000' of gutter). National Hardware Gate Hinge, Extra Heavy, Series: 287BC, Suitable For Use With: 2 X 4 or 4 X 4 Posts, 0.1 in Leaf Thickness, 4-1/4 in Gate Leaf, 3.05 in Frame Leaf Length, 0.326 in Pin, Fasteners: NO 12 Flat Head C-Sunk Screw, 48 lb Load Capacity, 4-1/4 in Overall Length, 4.8 in Overall Width, Hot Rolled Steel, Black, BHMA A138.18, 3-1/2 in Size National Hardware Gate Latch, Automatic, Series: V22, Gate, Post Mounting, Suitable For Use With: Out Swing Gates, Doors and Animal Pens, Steel, Zinc Plated, Includes: Mounting Screws, BHMA A138.18
Amerimax 29010 Gutter End with Drop National Hardware V21 Gate Latch National Hardware V21 Gate Latch
Amerimax Gutter End, 3 in Width X 4 in Depth, Suitable For Use With: 5 in K Style Gutter System, Steel, Galvanized, With Drop, Used to Direct Water from Gutter into Downspout National Hardware Gate Latch, Automatic, Series: V21, 4.44 in Overall Height, 2.37 in Overall Depth, Gate, Post Mounting, 0.22 in Diameter Mounting Hole, Suitable For Use With: Out Swing Gates, Doors and Animal Pens, Steel, White, Includes: Mounting Screws National Hardware Gate Latch, Automatic, Series: V21, 4.44 in Overall Height, 2.37 in Overall Depth, Gate, Post Mounting, 0.22 in Diameter Mounting Hole, Suitable For Use With: Out Swing Gates, Doors and Animal Pens, Steel, Black, Includes: Mounting Screws, BHMA A138.18
PULL BLACK 9-1/10IN           Genova RW112 Gutter Bracket Spacer Genova RB112 Gutter Bracket Spacer
PULLS 9-1/10IN BLK
Our Price: $7.28
National Hardware Door Pull, Series: V4847, Contemporary, 9-1/10 in Length, Steel, Black, Satin Nickel, Includes: Fasteners, Standards: BHMA A138.18, For Gates, Sheds and Doors Designed to compensate for the slope in roofs constructed with no vertical fascia or no fascia at all. Can be installed directly on end of roof rafter in installations that have no fascia board. Designed to compensate for the slope in roofs constructed with no vertical fascia or no fascia at all. Can be installed directly on end of roof rafter in installations that have no fascia board.
BOLT LAG BLACK 1/2X3IN        T-PLATE STEEL 5X5IN ZINC PLTD PULL BLACK 8-1/2IN
LAG BOLT 1/2X3IN BLK
Our Price: $7.42
National Hardware Lag Bolt, Series: V1863, Heavy Duty, 1/2 in Thread, 3 in Overall Length, Hex Head, 5/16 in Height x 3/4 in Width Head, Steel, Powder Coated, Black Reinforces flat surface joints, seams and cracks. Can be used to repair furniture. Design for a variety of applications. Hex lags included for mounting. Triple protected finish for extra corrosion protection. Visual-pack.
LATCH BOLT SLID ZN PLTD STEEL National Hardware V21A MaxLatch Self-Adjusting Gate Latch National Hardware V22 Gate Latch
Use on inward and outward swinging doors and gates. Use padlock for added security. National Hardware Gate Latch, Automatic, Self-Adjusting, Series: V21A, MaxLatch, Gate, Post Mounting, Stainless Steel, Zinc Plated, Includes: Mounting Screws, BHMA A138.18 National Hardware Gate Latch, Automatic, Series: V22, Gate, Post Mounting, Suitable For Use With: Out Swing Gates, Doors and Animal Pens, Steel, Black, Includes: Mounting Screws, BHMA A138.18
HINGE PIPE GATE ZN PLT 1-5/8IN Genova AB104 Repla K Gutter Drop Outlet Genova AW104A Repla K Gutter Drop Outlet
Non-Welded, Assembled, Can Be Used In Exterior Or Interior Applications, Boxed Loose. Connects gutter with DuraSpout downspout run on side of house. Connects gutter with DuraSpout downspout run on side of house.
Amerimax 2501019 Gutter End with Drop Amerimax 27010 Gutter End with Drop Amerimax 27080 Gutter End with Drop
Amerimax Gutter End, 2 in Width X 3 in Depth, Suitable For Use With: 5 in K Style Gutter System, Aluminum, Brown, With Drop, Used to Connect Gutter to Downspout Amerimax Gutter End, 2 in Width X 3 in Depth, Suitable For Use With: 5 in K Style Gutter System, Aluminum, White, With Drop, Used to Connect Gutter to Downspout Amerimax Gutter End, 5 in Length X 3 in Width X 4 in Depth, Suitable For Use With: K Style Gutter System, Aluminum, White, With Drop
Raingo Highflo HRW107 Drop Outlet Raingo Highflo HRB107 Drop Outlet LATCH BAR GATE HD ZN PLTD
Increases gutter capacity and discharge rate of rain water.  Improves overall efficiency of the Raingo downspout. Increases gutter capacity and discharge rate of rain water.  Improves overall efficiency of the Raingo downspout.
National Hardware V1134 Sliding Bolt Door/Gate Latch Stanley 275495 Pipe Gate Hinge National Hardware V1134 Sliding Bolt Door/Gate Latch
DOOR/GATE LATCHES BLK
Our Price: $8.92
National Hardware Door/Gate Latch, Sliding Bolt, Series: V1134, 6.19 in Overall Height, Suitable For Use With: Left or Right Hand Swinging Doors, Sliding Doors and Gates, Steel, Zinc Plated, Includes: Carriage Bolts and Screws, BHMA A138.18 Designed as replacement hinge for tubular pipe gates. 1-5/8" hinge for 5/8" size and 2" hinge for 3/4" size. National Hardware Door/Gate Latch, Sliding Bolt, Series: V1134, 6.19 in Overall Height, Suitable For Use With: Left or Right Hand Swinging Doors, Sliding Doors and Gates, Steel, Black, Includes: Carriage Bolts and Screws, BHMA A138.18
Genova AW103BK Repla K Outside Gutter Corner Genova AW103AK Repla K Inside Gutter Corner National Hardware V21A MaxLatch Self-Adjusting Gate Latch
Used for outside 90 degree corner. Used for inside 90 degree corner. National Hardware Gate Latch, Automatic, Self-Adjusting, Series: V21A, MaxLatch, Gate, Post Mounting, Stainless Steel, Black, Includes: Mounting Screws, BHMA A138.18
National Hardware N101-220 Adjust-O-Matic Gate Latch LATCH ORN DOOR/GATE BLACK     HINGE GATE BLACK BLACK
National Hardware Gate Latch, Automatic, Series: V21A, Adjust-O-Matic, 4-1/2 in Overall Width, 2.37 in Overall Depth, Suitable For Use With: In-Swing Doors, Steel, Black, Includes: Screws, BHMA A138.18, 4 in Size Designed for left or right hand swinging or sliding doors and gates. Includes surface mount and 90 degree strike plate option. Can be padlocked for added security. Bagged. Designed for applications with narrow mounting surfaces, such as gates, barn and shed doors, storage bins, and tool boxes. Bearing design eliminates metal to metal contact for smooth, quiet operation. Bagged.
HINGE GATE HD M GLV STL 3-1/3 National Hardware V836 Cane Bolt LATCH BOLT SLIDE BLACK STEEL
National Hardware Cane Bolt, Series: V836, 1/2 in Diameter, 12 in Overall Height, Wall Mounting, 0.94 in Mounting Hole, Suitable For Use With: Single or Double Doors and Gates in the Open or Closed Position, Hot Rolled Steel, Zinc Plated, Includes: Mounting Hardware, BHMA A138.18, For Vertical or Horizontal Applications Use on inward and outward swinging doors and gates. Use padlock for added security.
HINGE PIPE GATE ZN PLT 2IN    Genova AW945 Vinyl Adhesive National Hardware V836 Cane Bolt
CANE BOLTS 1/2X12IN BLK
Our Price: $10.70
Non-Welded, Assembled, Can Be Used In Exterior Or Interior Applications, Boxed Loose. Used to connect gutter and gutter fittings. 4.5 Oz. carded tube. National Hardware Cane Bolt, Series: V836, Suitable For Use With: Single or Double Doors and Gates in the Open or Closed Position, 1/2 in Diameter X 12 in Length, Hot Rolled Steel, Black, Includes: Mounting Hardware, BHMA A138.18
National Hardware N101-295 Adjust-O-Matic Gate Latch Amerimax 27201 K-Style Standard Inside Mitre Gutter Amerimax 27202 K-Style Standard Outside Mitre Gutter
National Hardware Gate Latch, Automatic, Series: V21A, Adjust-O-Matic, 4-1/2 in Overall Width, 2.37 in Overall Depth, Steel, Black, BHMA A138.18, 6 in Size Amerimax Mitre Gutter, K-Style, Standard, Inside, Amerimax, 5 in Width, Aluminum, White, Baked-On Amerimax Mitre Gutter, K-Style, Standard, Outside, Amerimax, 5 in Width, Aluminum, White, Baked-On
Amerimax 2520119 Gutter Inside Miter Amerimax 2520219 Gutter Outside Miter Billy Penn 5571-4 2-Piece Gutter Strap Hanger
Amerimax Gutter Inside Miter, Suitable For Use With: 5 in K Style Gutter System, Aluminum, Brown Amerimax Gutter Outside Miter, Suitable For Use With: 5 in K Style Gutter System, Aluminum, Brown Billy Penn Gutter Strap Hanger, 2-Piece, 5 in Length, Suitable For Use With: 5 in K Style System, Aluminum, Painted, White
Genova AW104CK Repla K Gutter Drop Outlet Acco 103 Cork Roll Amerimax 29202 Gutter Outside Miter
Connects gutter with DuraSpout downspout run on side of house. Used for custom bulletin boards and wall borders. Natural color. 1/8" Thickness. Amerimax Gutter Outside Miter, Suitable For Use With: 5 in K Style Gutter System, Steel, Galvanized
Amerimax 29201 Gutter Inside Miter Raingo Leafgo HRW208 Debris Separator National Hardware 859BC10 Ornamental T Hinge
GATE HINGES 10IN BLK
Our Price: $11.94
Amerimax Gutter Inside Miter, Suitable For Use With: 5 in K Style Gutter System, Steel, Galvanized Helps prevent leaves from clogging gutters. Adapts to metal gutter drop outlets by utilizing RW204 downspout converter. National Hardware T Hinge, Ornamental, Series: 859BC10, 40 lb Load Capacity, 10 in Overall Length, Steel, Black, Zinc Plated, BHMA A138.18
HINGE GATE BLACK 4IN          National Hardware V29 Gate Latch BOLT CANE BLACK STEEL 12IN
AUTOMATIC GATE LATCHES SS
Our Price: $12.02
For full surface applications. Designed for gates, doors, cabinets and sheds.  Bearing design eliminates metal to metal contact for smooth, quiet operation. Decorative design. Tight pin allows for right or left hand applications. Lags matching finish are included for mounting. Manufactured from hot-rolled steel. Visual-pack. National Hardware Gate Latch, Automatic, Universal, Series: V29, Suitable For Use With: Out Swing Gates, Doors and Animal Pens, Stainless Steel, Stainless Steel, Includes: Mounting Screws, BHMA A138.18 Can be used to lock gates or to keep gates open . Can be installed horizontally or vertically. Bolt can be kept in raised position when applied vertically.
Amerimax 2801400120 Square Corrugated Downspout Stanley 1162BC T-Plate 12 in L x 2 in W x 8 in H x 1/8 in T National Hardware V21 Gate Latch
TPLATES 12X8X1/8IN BLK
Our Price: $12.22
Amerimax Downspout, Square Corrugated, 120 in Length, 120 in Width, Suitable For Use With: 2 X 3 in Elbows, Steel, Galvanized, For Walls And Foundations Used to support the joining of a cross beam with a support beam by application to the side. Four superior strength plates should be used on both sides of the joint with through bolts. National Hardware Gate Latch, Automatic, Series: V21, 4.44 in Overall Height, 2.37 in Overall Depth, Gate, Post Mounting, 0.22 in Diameter Mounting Hole, Suitable For Use With: Out Swing Gates, Doors and Animal Pens, Steel, Galvanized, Includes: Mounting Screws, BHMA A138.18
National Hardware V24 In-Swinging Thumb Latch National Hardware N177-196 Cane Bolt National Hardware V1134 Sliding Bolt Door/Gate Latch
DOOR/GATE LATCHES BLK
Our Price: $12.71
CANE BOLT 1/2X18IN ZN PLT
Our Price: $12.71
DOOR/GATE LATCHES GALV
Our Price: $12.97
National Hardware Thumb Latch, In-Swinging, Series: V24, 0.915 in Diameter, 1.37 in Overall Height, 4.02 in Overall Width, Suitable For Use With: Doors and Gates Upto 1-3/4 in Thickness and In-Swinging Doors, Hot Rolled Steel, Black, Includes: Hex Lags and Screws, BHMA A138.18 National Hardware Cane Bolt, Series: V835, 1/2 in Diameter, 18 in Overall Height, Wall Mounting, 0.94 in Mounting Hole, Suitable For Use With: Heavy Wood Gates And Doors, Hot Rolled Steel, Zinc Plated, BHMA A138.18, For Vertical or Horizontal Applications National Hardware Door/Gate Latch, Sliding Bolt, Series: V1134, 6.19 in Overall Height, Suitable For Use With: Left or Right Hand Swinging Doors, Sliding Doors and Gates, Steel, Galvanized, Includes: Carriage Bolts and Screws, BHMA A138.18
LATCH THUMB STEEL BLACK       HINGE GATE ZINC PLATED 3-1/2IN Professional Choice 179192 Ornamental Strap Hinge
For inward and outward swinging doors and gates 5/8" - 1-3/4" thick. Use with padlock for added security. Screws included. National Gate Hinge, Extra Heavy Duty, Surface Mounting, 48 lb Load Capacity, 3-1/2 in Overall Length, 12 ga Steel, Zinc-Plated, Standards: ANSI/BHMA A156.20-2989, For Home, Farm, Builder or Industrial Customers Manufactured from hot-rolled steel. Designed for full surface applications: Gates, garage doors, barns, sheds and rustic doors. Tight pin for left or right hand applications. Triple protected finish for extra corrosion protection. Reversible pin allows right or left hand applications. Safe working load (SWL) 40 lbs.
National Hardware V13B All Purpose Door/Gate Latch National Hardware N151-951 Cane Bolt GATE SPRING ORNMT 13-3/4 BLK
DOOR/GATE LATCHES ZN PLT
Our Price: $13.49
CANE BOLT 5/8X18IN ZN PLT
Our Price: $13.51
National Hardware Door/Gate Latch, All Purpose, Series: V13B, 5.42 in Overall Height, Suitable For Use With: Left or Right Hand Swinging Doors, Sliding Doors and Gates, Steel, Zinc Plated, Includes: Screws, BHMA A138.18 National Hardware Cane Bolt, Series: V835, 5/8 in Diameter, 18 in Overall Height, Wall Mounting, 0.94 in Mounting Hole, Suitable For Use With: Heavy Wood Gates And Doors, Hot Rolled Steel, Zinc Plated, BHMA A138.18, For Vertical or Horizontal Applications Designed to close doors and gates automatically. Mounts on hinge side of door.
LATCH ORN DOOR/GTE ZINC PLATED National Hardware BV835 Adjustable Throw Cane Bolt Amerimax DSPRP283 Plain Round Downspout
CANE BOLTS 1/2X18IN BLK
Our Price: $13.85
Designed for right or left hand swinging gates. Rounded edges to protect livestock. Sturdy design gives years of trouble-free service. To lock, use National's #33S plate staple and a padlock. Lags and mounting screws included. Hot rolled steel guides; steel rod bar and strike. Boxed. National Hardware Cane Bolt, Adjustable Throw, Series: BV835, Suitable For Use With: Heavy Wood Gates and Doors, 1/2 in Diameter X 18 in Length, Hot Rolled Steel, Black, BHMA A138.18 Amerimax Downspout, Plain Round, 3 in Length, Suitable For Use With: Half Round Galvanized Gutter, Galvanized, 28 ga Thickness
LATCH THUMB ORNMTL BLK STL    National Hardware V852 Anti-Sag Gate Kit GATE ANTI-SAG KIT ZN PLTD STL
GATE REPAIR ZN PLT
Our Price: $14.50
Use on gates and doors. Can be used for right or left hand applications. Screws included. National Hardware Anti-Sag Gate Kit, Series: V852, Includes: Top and Bottom Corner Bracket, Rope Clips, Cable, turnbuckle and Mounting Screws, Steel Housing, BHMA A138.18, Zinc Plated Eliminates gate sag. Steel. Includes: (2) corner braces, (2) pairs of cable clamps, (1) hook and eye turnbuckle and (1) 90" stranded steel cable and fastener.
STRAP HINGE                   Amerimax 25024 Snap Lok Bracket National Hardware V850 Self-Closing Door and Gate Spring
STRAP HINGE
Our Price: $14.78
Ornamental strap hinge is ideal for use on outs winging gates and doors. Heavy gauge steel that has a weather resistant finish. Reversible loose pin provides for right hand or left hand applications. Post leaf 4"L x 7-11/16" strap x 1-7/8" strap width at joint. 5 lag screws 5/16" x 1-1/2". Amerimax Snap Lok Bracket, 5 in Length, Suitable For Use With: K Style Hanger, Aluminum, White National Hardware Door and Gate Spring, Self-Closing, Series: V850, 11 in Nominal, Hot Rolled Steel, Black, Includes: Mounting Screws
BOLT CANE BLACK STEEL 18IN    National Hardware V1135 Sliding Bolt Door/Gate Latch National Hardware V28 Gate Latch
DOOR/GATE LATCHES ZN PLT
Our Price: $15.12
DOOR/GATE LATCHES BLK
Our Price: $15.53
Can be used to lock gates or to keep gates open . Can be installed horizontally or vertically. Bolt can be kept in raised position when applied vertically. National Hardware Door/Gate Latch, Sliding Bolt, Series: V1135, Suitable For Use With: Right or Left Hand Swinging Gates, Steel, Zinc Plated, Includes: Lags and Mounting Screws, BHMA A138.18 National Hardware Gate Latch, Heavy Duty, Series: V28, 6-3/4 in Overall Height, Post Mounting, 1-1/4 in Mounting Hole, Suitable For Use With: Fence Post Between Gate and Jamb, Hot Rolled Steel, Black, Includes: Hex Lags, BHMA A138.18
HINGE GATE BLACK 7IN          National Hardware V29A MaxLatch Self-Adjusting Gate Latch National Hardware V287 Extra Heavy Gate Hinge
GATE HINGES 7IN BLK
Our Price: $15.59
AUTOMATIC GATE LATCHES SS
Our Price: $15.72
GATE HINGES 3-1/2IN BLK
Our Price: $15.87
National T-Hinge, Contemporary, Surface Mounting, 55 lb Load Capacity, 7 in Overall Length, 12 ga Steel, Black, For Gates, Sheds and Barn Doors National Hardware Gate Latch, Automatic, Self-Adjusting, Series: V29A, MaxLatch, Stainless Steel, Stainless Steel, BHMA A138.18 National Hardware Gate Hinge, Extra Heavy, Series: V287, 35 lb Load Capacity, 3-1/2 in Overall Length, 4-1/2 in Overall Width, Steel, Black, Zinc Plated, BHMA A138.18
National Hardware V27 Ornamental Gate Latch National Hardware V850 Self-Closing Door and Gate Spring Adjust-A-Gate UL301 Adjustable Drop Rod Kit
National Hardware Gate Latch, Ornamental, Series: V27, 10.4 in Overall Height, Suitable For Use With: Door and Gates from 1-1/2 - 3 in Thickness, Steel, Black, BHMA A138.18, 3 in Size National Hardware Door and Gate Spring, Self-Closing, Series: V850, 14 in Nominal, 61/64 in Outside Diameter, Hot Rolled Steel, Black, Includes: Mounting Screws Ideal use for double gate entry, by putting two gates together. Attaches directly to the frame. Helps prevent sagging and dragging of gate. Galvanized parts for long lasting protection and maximum life. Provides an anchoring rod to secure 1 side of a double gate. Easy on site assembly. For wood and composite. Steel hardware and screws included. Gate Not Included. Galvanized steel cane.
HINGE GATE GALV 3-5/8IN       National Hardware V849 Ornamental T Hinge National Hardware V841 Decorative Ornamental/Reversible T Hinge
GATE HINGES 7IN BLK
Our Price: $16.92
GATE HINGES 6IN BLK
Our Price: $17.33
For gates, sheds and barn doors. WeatherGuard for maximum protection from the outdoor elements. Includes fasteners. Safe working load 48 lbs. Visual-pack. National Hardware T Hinge, Ornamental, Series: V849, 55 lb Load Capacity, 7 in Overall Length, Steel, Black, Zinc Plated, Includes: Screws, BHMA A138.18 National Hardware T Hinge, Decorative, Heavy Duty, Ornamental/Reversible, Series: V841, 6 in Overall Length, Steel, Black, Zinc Plated, BHMA A138.18, For Gates, Doors, Cabinets and Sheds
LATCH GATE THUMB BLK STL      National Hardware V844 Ornamental Hook and Strap Hinge National Hardware V1131 Sliding Bolt Door/Gate Latch
GATE HINGES 7IN BLK
Our Price: $17.83
DOOR/GATE LATCHES SS
Our Price: $17.96
Use on gates and doors. Can be used for right or left hand applications. Screws included. National Hardware Hook and Strap Hinge, Ornamental, Series: V844, 0.343 in Hole Diameter, 0.105 in Leaf Thickness, Fasteners: 5/16 X 1-1/2 in Screw, 50 lb Load Capacity, 11-1/4 in Overall Length, 7 in Overall Width, Steel, Black, Zinc Plated, Includes: Screws, BHMA A138.18 National Hardware Door/Gate Latch, Sliding Bolt, Standard Duty, Series: V1131, 3 in Overall Height, 6-1/2 in Overall Width, 1-1/4 in Overall Depth, Suitable For Use With: Swinging or Sliding Doors and Gates, Stainless Steel, Stainless Steel, BHMA A138.18, For Premium Woods Like Cedar and Redwood
HINGE GATE BLACK 7-1/2IN      Amerimax DSPRP284 Plain Round Downspout LATCH ORN DOOR/GTE ZINC PLATED
For gates, sheds and barn doors. WeatherGuard for maximum protection from the outdoor elements. Fasteners included. Safe working load 55 lbs. Visual-pack. Amerimax Downspout, Plain Round, 4 in Length, Suitable For Use With: Half Round Galvanized Gutter, Galvanized, 28 ga Thickness Automatic retractable bolt. Designed for right or left hand swinging gates. Rounded edges to protect livestock. Sturdy design gives years of trouble-free service. Lags and mounting screws included. Hot rolled steel guides; steel rod bar and strike. Boxed.
T-HINGE ORNT BLK STL 7-11/16IN Billy Penn 2509 Half Round Gutter End with Outlet National Hardware V23A Adjust-O-Matic Gate Latch
Adds ornamental design to any gate, door, storage bins and tool boxes. Screws included. Billy Penn Gutter End, Half Round, 3 in Diameter, Suitable For Use With: 5 in Half Round System, Galvanized, With Outlet National Hardware Gate Latch, Heavy Duty, Series: V23A, Adjust-O-Matic, 2-1/2 in Overall Height, 3-1/4 in Overall Width, Steel, Zinc Plated, BHMA A138.18, 8 in Size
LATCH ORN DOOR/GTE ZINC PLATED HOOK SCREW/HINGE STRAP 8IN BLK National Hardware V810 Cane Bolt
CANE BOLTS 1/2X12IN SS
Our Price: $19.70
Automatic retractable bolt clears entry for livestock protection. Designed for right or left hand swinging gates. Rounded edges to protect livestock. Sturdy design gives years of trouble-free service. Lags and mounting screws included. Hot rolled steel guides; steel rod bar and strike. Visual-pack. Use on gates and square or round fence posts. Durable. Screws included. National Hardware Cane Bolt, Series: V810, 1/2 in Diameter, 12 in Overall Height, Stainless Steel, Stainless Steel, BHMA A138.18
HINGE STRAP ORNMTL 7-11/16 BLK LATCH ORN DOOR/GATE BLACK     HINGE GATE BLACK 13IN
DOOR/GATE LATCHES BLK
Our Price: $20.99
Adds ornamental design to any gate, door, storage bins and tool boxes. With loose steel pin. Screws included. National Hardware Stall/Gate Latch, Series: N236, 5.57 in Overall Height, 0.34 in Bolt Diameter, 10.29 in Bolt Length, 0.26 in Dia Mounting Hole, Suitable For Use With: Right or Left Hand Swinging Gates, Steel, Black, Includes: Lags and Mounting Screws, Standards: BHMA A138.18 Bearing design eliminates metal to metal contact for smooth, quiet operation. 100 lbs. Safe Working Load. Visual-pack.
National Hardware V23A Adjust-O-Matic Gate Latch National Hardware DPV845 Gate Kit National Hardware V289 Extra Heavy Gate Hinge
GATE KITS BLACK
Our Price: $22.41
GATE HINGES 3-1/2IN SS
Our Price: $22.45
National Hardware Gate Latch, Heavy Duty, Series: V23A, Adjust-O-Matic, 2-1/2 in Overall Height, 3-1/4 in Overall Width, Steel, Black, BHMA A138.18, 8 in Size National Hardware Gate Kit, Series: DPV845, Includes: (1) Gate Latch, (2) T-Hinges, Mounting Fasteners, Decorative Hinges, Latch Self Latching and Visual Pac, Steel Housing, Black, Suitable For Use With: Doors, Gates and Sheds, BHMA A138.18, 55 lb Load National Hardware Gate Hinge, Extra Heavy, Series: V289, Suitable For Use With: 2 X 4 or 4 X 4 Posts, Hot Rolled Steel, Stainless, ANSI/BHMA A138.18, 3-1/2 in Size
HINGE GATE BLACK 8IN          LATCH POST BLK W/SCREWS STEEL LATCH GATE AUTO WHITE
HINGE GATE BLACK 8IN
Our Price: $22.46
Manufactured from hot-rolled steel. Designed for full surface applications: Gates, garage doors, barns, sheds and rustic doors. Tight pin for left or right hand applications. Triple protected finish for extra corrosion protection. Reversible pin allows right or left hand applications. Safe working load (SWL) 40 lbs. Use on inward or outward swinging doors. Use for right or left handed applications. Durable. Less screws. Visual-pack.
Stanley 1162BC T-Plate 12 in L x 2-1/2 in W x 12 in H x 3/16 in T National Hardware V846 Ornamental Spring T Hinge Raingo AW201A Type A Downspout Elbow
TPLATES 12X12X3/16IN BLK
Our Price: $22.74
GATE HINGES 7IN BLK
Our Price: $22.79
Used to support the joining of a cross beam with a support beam by application to the side. Four superior strength plates should be used on both sides of the joint with through bolts. National Hardware Spring T Hinge, Ornamental, Series: V846, 0.105 in Leaf Thickness, 50 lb Load Capacity, 10 in Overall Length, 7 in Overall Width, Steel, Black, Zinc Plated, Includes: Screws, BHMA A138.18 Crushproof material. Never needs painting. Will not rust, rot or chip. Non-metallic, fits existing aluminum systems.
Raingo AB201A Type A Downspout Elbow HINGE GATE BLACK 10IN         American Wood WM937-7 Stop
Crushproof material. Never needs painting. Will not rust, rot or chip. Non-metallic, fits existing aluminum systems. Decorative design with reversible design. Ideal for surface mount on gates, sheds and doors. Bearing design eliminates metal to metal contact for smooth, quiet operation. Bagged. American Wood Colonial Stop, 1-3/8 in Width, 84 in Length, 1/16 in Thickness, Wood
American Wood WM847-7 Ranch Stop National Hardware V25 Swinging Door Latch T-HINGES H-DUTY ORNT BLACK STL
DOOR/GATE LATCHES ZN PLT
Our Price: $24.15
American Wood Ranch Stop, 1-3/8 in Width, 84 in Length, 7/16 in Thickness, Wood National Hardware Swinging Door Latch, Heavy Duty, Series: V25, Suitable For Use With: 3/4 - 2-1/4 in Thickness Doors, Fasteners: Screws, Steel, Zinc Plated, BHMA A138.18 Extra heavy gauge steel and weather resistant. Heavy-duty construction minimizes gate sag and provides long maintenance free operation. Screws included.
GATE KIT BLACK                LATCH ORN DOOR/GATE BLACK