Home > HARDWARE > CONSTRUCTION HARDWARE > LUMBER / MOLDING/TRIM > DIMENSIONAL LUMBER
Sort By:
1
HINGE STRAP ZINC PLATED 3IN   American Wood PCOM-144 Common Board HINGE STRAP ZINC PLATED 5IN
STRAP HINGES 3IN ZN PLT
Our Price: $1.95
STRAP HINGES 5IN ZN PLT
Our Price: $3.03
Offset screw holes for extra strength and to prevent wood from splitting. Tight pin for left or right hand applications. Steel with aluminum pin. Safe working load: 18 lbs. Boxed loose. American Wood Common Board, 1 in Thickness, 4 in Width, 4 ft Length, Pine Offset screw holes for extra strength and to prevent wood from splitting. Tight pin for left or right hand applications. Steel with aluminum pin. Safe working load: 18 lbs. Boxed loose.
HINGE STRAP STEEL LD 2IN ZINC HINGE STRAP ZINC PLATED 6IN   Oatey 14206 Rain Collar
STRAP HINGES 6IN ZN PLT
Our Price: $3.53
Use in both the interior and exterior. Screws included. Offset screw holes for extra strength and to prevent wood from splitting. Tight pin for left or right hand applications. Steel with aluminum pin. Safe working load: 18 lbs. Boxed loose. Offers a quick, positive repair to leaking flashings. Slides easily over vent stack to act as a protective shield or storm collar. No caulking is necessary.  Made with non-fading materials.
Oatey 14205 Rain Collar Stanley 131193 Hinge Screw Eye Stanley 130112 Screw Hook
Offers a quick, positive repair to leaking flashings. Slides easily over vent stack to act as a protective shield or storm collar. No caulking is necessary.  Made with non-fading materials. To be used in wood gate applications in conjunction with screw hooks, bolt hooks and pintles. For use with new installations with Stanley's 130732, 131102, 248047, 131060, 130765, and 130799 hinge straps. Adjusts to correct gate sag.
American Wood PCLR1X2-6 4-Sided Sanded Common Board National Hardware 282BC Flush/Full Inset Strap Hinge National Hardware V288 Hinge Hasp
STRAP HINGES 4IN ZN PLT
Our Price: $3.95
HINGE HASPS 3IN ZN PLT
Our Price: $4.04
Sanded on 4 sides. National Hardware Strap Hinge, Flush/Full Inset, Heavy Duty, Series: 282BC, 0.28 in Hole Diameter, 0.08 in Leaf Thickness, 4 in Door Leaf Length, 1.61 in Door Leaf Width, 4 in Frame Leaf Length, 1.61 in Frame Leaf Width, 0.22 in Diameter Pin, Wall Mounting, 60 lb Load Capacity, 8 in Overall Width, Hot Rolled Steel, Zinc Plated, BHMA A138.18 National Hardware Hinge Hasp, Series: V288, 3/4 in Height Shackle, 5-1/4 in Length, 1-5/32 in Height, Hot Rolled Steel, Aluminum Pin, Zinc Plated, BHMA A138.18 Certified, 3 in, For Regular or Around the Corner Applications
HINGE STRAP STEEL LD 3IN ZINC National Hardware V280 Flush/Full Inset Light Strap Hinge National Hardware 282BC Flush/Full Inset Strap Hinge
STRAP HINGES 2IN ZN PLT
Our Price: $4.20
STRAP HINGES 5IN ZN PLT
Our Price: $4.20
Use in both the interior and exterior. Screws included. National Hardware Light Strap Hinge, Flush/Full Inset, Series: V280, 6 Holes, 0.05 in Leaf Thickness, 1-1/16 in Door Leaf Length, 2 in Door Leaf Width, 1-1/16 in Frame Leaf Length, 2 in Frame Leaf Width, Fixed Pin, 0.119 in Diameter Pin, Aluminum Pin, Wall Mounting, 18 lb Load Capacity, 3-3/4 in Overall Length, 1-1/16 in Overall Width, Zinc Plated National Hardware Strap Hinge, Flush/Full Inset, Heavy Duty, Series: 282BC, 0.09 in Leaf Thickness, 5 in Door Leaf Length, 1.85 in Door Leaf Width, 5 in Frame Leaf Length, 1.85 in Frame Leaf Width, 0.27 in Diameter Pin, Wall Mounting, 70 lb Load Capacity, 9.54 in Overall Width, Hot Rolled Steel, Zinc Plated, BHMA A138.18
Flex-Flash No-Calk 14012 Flexible Roof Flashing No-Calk 11898 Roof Flashing No-Calk 11899 Roof Flashing
Slides over pipe for pitch to 45 degrees. 100% completely flexible/foldable. Flexible base conforms to most flat or contoured roof surfaces. Non-fading TPR base and collar. No caulking needed. Rated 180 degrees Fahrenheit continuous heat. Not for hot-mopped or built-up roofs. Do not use petroleum-based products on rubber bases or rubber collars. Slides over pipe for pitch to 45 degree. Non-fading and non-cracking, rigid black thermoplastic base. Non-fading, self-sealing collar. Rated 180 degrees Fahrenheit continuous heat. Not for hot-mopped or built-up roofs. Do not use petroleum-based products on plastic bases or rubber collars. Slides over pipe for pitch to 45 degree. Non-fading and non-cracking, rigid black thermoplastic base. Non-fading, self-sealing collar. Rated 180 degrees Fahrenheit continuous heat. Not for hot-mopped or built-up roofs. Do not use petroleum-based products on plastic bases or rubber collars.
No-Calk 11890 Roof Flashing National Hardware V280 Flush/Full Inset Light Strap Hinge Oatey 14207 Rain Collar
STRAP HINGES 3IN ZN PLT
Our Price: $4.53
Slides over pipe for pitch to 45 degree. Non-fading and non-cracking, rigid black thermoplastic base. Non-fading, self-sealing collar. Rated 180 degrees Fahrenheit continuous heat. Not for hot-mopped or built-up roofs. Do not use petroleum-based products on plastic bases or rubber collars. National Hardware Light Strap Hinge, Flush/Full Inset, Series: V280, 6 Holes, 0.056 in Leaf Thickness, 1-3/16 in Door Leaf Length, 3 in Door Leaf Width, 1-3/16 in Frame Leaf Length, 3 in Frame Leaf Width, Fixed Pin, 0.17 in Diameter Pin, Aluminum Pin, Wall Mounting, 5-11/16 in Overall Length, 1-3/16 in Overall Width, Hot Rolled Steel, Zinc Plated Offers a quick, positive repair to leaking flashings. Slides easily over vent stack to act as a protective shield or storm collar. No caulking is necessary.  Made with non-fading materials.
Flex-Flash No-Calk 14009 Flexible Roof Flashing Mintcraft LR083 Bolt Hook HINGE STRAP STEEL LD 2IN GALV
Slides over pipe for pitch to 45 degrees. 100% completely flexible/foldable. Flexible base conforms to most flat or contoured roof surfaces. Non-fading TPR base and collar. No caulking needed. Rated 180 degrees Fahrenheit continuous heat. Not for hot-mopped or built-up roofs. Do not use petroleum-based products on rubber bases or rubber collars. Can be used with gate strap hinges to support wooden gates and fences. Can be easily adjusted. Use in both the interior and exterior. Screws included.
Stanley 130146 Screw Hook Mintcraft LR094 Screw Hook All-Flash No-Calk 11919 Roof Flashing
For use with new installations with Stanley's 130732, 131102, 248047, 131060, 130765, and 130799 hinge straps. Adjusts to correct gate sag. Easily installs into wood surfaces. Replaces worn or broken bolt hooks. Can be used with strap hinges. Slides over pipe for pitch up to 45 degrees. Non-fading, non-cracking, and non-rusting bases and sealing collars. Rated 180 degrees Fahrenheit continuous heat. Approved for Type B installations. Ring on collar tears off, allowing flashings to seal different pipe diameters. Base made of rigid thermoplastic. Not for hot-mopped or built-up roofs. Do not use petroleum based products on plastic bases or rubber collars.
National Hardware 282BC Flush/Full Inset Strap Hinge Stanley 131060 Hinge Strap HINGE STRAP STEEL LD 3IN GALV
STRAP HINGES 6IN ZN PLT
Our Price: $4.82
National Hardware Strap Hinge, Flush/Full Inset, Heavy Duty, Series: 282BC, 0.1 in Leaf Thickness, 6 in Door Leaf Length, 2.43 in Door Leaf Width, 6 in Frame Leaf Length, 2.43 in Frame Leaf Width, 0.32 in Diameter Pin, Wall Mounting, 85 lb Load Capacity, 11.47 in Overall Width, Hot Rolled Steel, Zinc Plated, BHMA A138.18 Designed for new installations with Stanley's 130708, 130559, 130583, and 130617 hooks. Strap punched for 5/16" (6" and 8" sizes) or 3/8" (10", 12", 14", 16" 18", 20" and 24" sizes) bolts. Use in both the interior and exterior. Screws included.
Oatey 14208 Rain Collar Stanley 131227 Hinge Screw Eye National Hardware V288 Hinge Hasp
HINGE HASPS 4IN ZN PLT
Our Price: $5.06
Offers a quick, positive repair to leaking flashings. Slides easily over vent stack to act as a protective shield or storm collar. No caulking is necessary.  Made with non-fading materials. To be used in wood gate applications in conjunction with screw hooks, bolt hooks and pintles. National Hardware Hinge Hasp, Series: V288, 3/4 in Height Shackle, 6-1/4 in Length, 1-1/4 in Height, Hot Rolled Steel, Aluminum Pin, Zinc Plated, BHMA A138.18 Certified, 4 in, For Regular or Around the Corner Applications
HINGE STRAP STEEL LD 4IN ZINC Flex-Flash No-Calk 14038 Flexible Roof Flashing No-Calk 11891 Roof Flashing
Use in both the interior and exterior. Screws included. Slides over pipe for pitch to 45 degrees. 100% completely flexible/foldable. Flexible base conforms to most flat or contoured roof surfaces. Non-fading TPR base and collar. No caulking needed. Rated 180 degrees Fahrenheit continuous heat. Not for hot-mopped or built-up roofs. Do not use petroleum-based products on rubber bases or rubber collars. Slides over pipe for pitch to 45 degree. Non-fading and non-cracking, rigid black thermoplastic base. Non-fading, self-sealing collar. Rated 180 degrees Fahrenheit continuous heat. Not for hot-mopped or built-up roofs. Do not use petroleum-based products on plastic bases or rubber collars.
American Wood PCLR1X3-6 4-Sided Sanded Common Board No-Calk 11887 Roof Flashing American Wood PCOM-184 Common Board
Sanded on 4 sides. Slides over pipe for pitch to 45 degree. Non-fading and non-cracking, rigid black thermoplastic base. Non-fading, self-sealing collar. Rated 180 degrees Fahrenheit continuous heat. Not for hot-mopped or built-up roofs. Do not use petroleum-based products on plastic bases or rubber collars. American Wood Common Board, 1 in Thickness, 8 in Width, 4 ft Length, Pine
Stanley 131102 Hinge Strap No-Calk 11888 Roof Flashing Stanley 130559 Full Threaded Bolt Hook
Designed for new installations with Stanley's 130708, 130559, 130583, and 130617 hooks. Strap punched for 5/16" (6" and 8" sizes) or 3/8" (10", 12", 14", 16" 18", 20" and 24" sizes) bolts. Slides over pipe for pitch to 45 degree. Non-fading and non-cracking, rigid black thermoplastic base. Non-fading, self-sealing collar. Rated 180 degrees Fahrenheit continuous heat. Not for hot-mopped or built-up roofs. Do not use petroleum-based products on plastic bases or rubber collars. Adjust to correct gate sag. Includes 2 washers and 2 nuts per hook. Full threaded hook is bolted through the post and firmly secured with standard size nuts and washers on each side. As a replacement part: use with National's 292 Bold Hook. For new installations: use with National's #294 Hinge Straps. Use with the Stanley/National Strap size 14"(N130-799), 16"(N168-336), and the 18"(N248-039).
Flex-Flash No-Calk 14041 Flexible Roof Flashing Mintcraft LR095 Screw Hook No-Calk 11889 Roof Flashing
Slides over pipe for pitch to 45 degrees. 100% completely flexible/foldable. Flexible base conforms to most flat or contoured roof surfaces. Non-fading TPR base and collar. No caulking needed. Rated 180 degrees Fahrenheit continuous heat. Not for hot-mopped or built-up roofs. Do not use petroleum-based products on rubber bases or rubber collars. Easily installs into wood surfaces. Replaces worn or broken bolt hooks. Can be used with strap hinges. Slides over pipe for pitch to 45 degree. Non-fading and non-cracking, rigid black thermoplastic base. Non-fading, self-sealing collar. Rated 180 degrees Fahrenheit continuous heat. Not for hot-mopped or built-up roofs. Do not use petroleum-based products on plastic bases or rubber collars.
Stanley N128-249 Strap Hinge National Hardware V280 Flush/Full Inset Light Strap Hinge American Wood PLCR1X4-6 4-Sided Sanded Common Board
STRAP HINGES 4IN GALV
Our Price: $6.37
STRAP HINGES 4IN ZN PLT
Our Price: $6.37
National Strap Hinge, Heavy Duty, Series: N128-249, Suitable For Use With: Barn, Shed Doors, Storage Bins, Tool Boxes and Gates, 3 Holes, 4 in Door Leaf, 1.61 in Door Leaf, Tight Pin, Brass Pin, Screw Mounting, Fasteners: NO 7 Screw, Steel, Galvanized National Hardware Light Strap Hinge, Flush/Full Inset, Series: V280, 6 Holes, 0.056 in Leaf Thickness, 1-1/4 in Door Leaf Length, 4 in Door Leaf Width, 1-1/4 in Frame Leaf Length, 4 in Frame Leaf Width, Fixed Pin, 0.195 in Diameter Pin, Aluminum Pin, Wall Mounting, 8 lb Load Capacity, 7-11/16 in Overall Length, 1-1/4 in Overall Width, Zinc Plated Sanded on 4 sides.
American Wood PLCR1X3-4 4-Sided Sanded Common Board HINGE STRAP STEEL LD 6IN ZINC HINGE HASP ZINC PLATED 6IN
HINGE HASPS 6IN ZN PLT
Our Price: $6.66
Sanded on 4 sides. Use in both the interior and exterior. Screws included. Stanley Hinge Hasp, Series: V288, 1 Locking Holes, 6 in Length, Hot Rolled Steel, Zinc-Plated, For Regular or Around The Corner Applications
Mintcraft LR085 Bolt Hook National Hardware 282BC Flush/Full Inset Strap Hinge American Wood STUD2X4X6 Stud Grade Wood Molding
STRAP HINGES 8IN ZN PLT
Our Price: $6.82
Can be used with gate strap hinges to support wooden gates and fences. Can be easily adjusted. National Hardware Strap Hinge, Flush/Full Inset, Heavy Duty, Series: 282BC, 0.11 in Leaf Thickness, 8 in Door Leaf Length, 3.08 in Door Leaf Width, 8 in Frame Leaf Length, 3.08 in Frame Leaf Width, 0.39 in Diameter Pin, Wall Mounting, 15.39 in Overall Width, Hot Rolled Steel, Zinc Plated, BHMA A138.18, For Residential Applications American Wood Wood Molding, Stud Grade, 2 in Thickness, 4 in Width, 6 ft Length
HINGE STRAP STEEL LD 4IN GALV American Wood 2X3X8 Stud Grade Wood Molding Stanley 130179 Screw Hook
Use in both the interior and exterior. Screws included. American Wood Wood Molding, Stud Grade, 2 in Thickness, 3 in Width, 8 ft Length For use with new installations with Stanley's 130732, 131102, 248047, 131060, 130765, and 130799 hinge straps. Adjusts to correct gate sag.
HOOK SCREW/HINGE STRAP 6IN    Stanley 131375 Pintle American Wood 309532 Stud Grade Wood Molding
Replaces worn or broken bolt hooks.  Can be used with strap hinges Designed for use with Stanley's 130732, 131102, 248047, 131060, 248039, 130765, 168336, and 130799 hinge straps. Gate can be easily lifted off of pintle. Designed for heavy-duty gates and doors. Pintle punched for 5/16" (1/2" size) or 3/8" (5/8" size) bolts. American Wood Wood Molding, Stud Grade, American Wood, 2 in Thickness, 4 in Width, 8 ft Length
All-Flash No-Calk 12920 Roof Flashing HOOK SCREW/HINGE STRAP 8IN    All-Flash No-Calk 11871 Roof Flashing
Slides over pipe for pitch to 40 degrees. Non-fading, self-sealing collar. Rated 180 degrees Fahrenheit continuous heat. Approved for Type B installations. Rustproof .032 stamped aluminum standard base. Not for hot-mopped or built-up roofs. Do not use petroleum based products on collars. Replaces worn or broken bolt hooks.  Can be used with strap hinges Slides over pipe for pitch up to 40 degrees. Non-fading, non-cracking and non-rusting bases and sealing collars. Ring on collar tears off, allowing flashings to seal different pipe diameters. Rated 180 degrees Fahrenheit continuous heat. Approved for Type B installations. Base made of 24 gauge steel. Not for hot-mopped or built-up roofs. Do not use petroleum based products on plastic bases or rubber collars.
Stanley 130732 Hinge Strap National Hardware V280 Flush/Full Inset Light Strap Hinge Stanley 130617 Full Threaded Bolt Hook
STRAP HINGES 5IN ZN PLT
Our Price: $8.09
Designed for new installations with Stanley's 130708, 130559, 130583, and 130617 hooks. Strap punched for 5/16" (6" and 8" sizes) or 3/8" (10", 12", 14", 16" 18", 20" and 24" sizes) bolts. National Hardware Light Strap Hinge, Flush/Full Inset, Series: V280, 6 Holes, 0.072 in Leaf Thickness, 1-1/2 in Door Leaf Length, 5 in Door Leaf Width, 1-1/2 in Frame Leaf Length, 5 in Frame Leaf Width, Fixed Pin, 0.195 in Diameter Pin, Aluminum Pin, Wall Mounting, 9-5/8 in Overall Length, 1-1/2 in Overall Width, Hot Rolled Steel, Zinc Plated Adjust to correct gate sag. Includes 2 washers and 2 nuts per hook. Full threaded hook is bolted through the post and firmly secured with standard size nuts and washers on each side. As a replacement part: use with National's 292 Bold Hook. For new installations: use with National's #294 Hinge Straps. Use with the Stanley/National Strap size 14"(N130-799), 16"(N168-336), and the 18"(N248-039).
Builders Edge 130010006001 Octagon Mounting Block American Wood WH-1X4X4 Hardwood Board American Wood PLCR1X4-4 4-Sided Sanded Common Board
Surface mount for light fixture; decoratively provides a level and waterproof surface for all exterior fixtures; durable, maintenance-free, UV stabilized and constructed with color molded so they won't scratch, flake or fade; the patented snap-on trim ring makes installation easy; fits all type of siding; outside dimension: 6-7/10" x 6-7/10"; Limited Lifetime warranty. Made in USA. White hardwood boards. Sanded on 4 sides.
American Wood 309533 Common Board All-Flash No-Calk 11930 Roof Flashing All-Flash No-Calk 12945 Roof Flashing
American Wood Common Board, American Wood, 1 in Thickness, 4 in Width, 8 ft Length, Pine Patented one-piece design; sealing collar will not come off. Capable of working on roof pitch from 2/12 (10 degrees) to 20/12 (60 degrees) without stress on collar. Tear-away ring on the collar provides options for sealing different pipe sizes and types. Larger thermoplastic base than normal NO-CAULK flashings. Never needs caulking. Sealing collar rides with pipe as it expands and contracts during temperature fluctuations. Double seal contact between pipe and collar, assuring a leak free seal. Will not rust, corrode, warp, or crack. Lays perfectly flat on the roof. Designed to seal all types of pipe such as copper, cast iron, plastic, aluminum, and galvanized. Not for hot-mopped or built-up roofs. Do not use petroleum based products on plastic bases or rubber collars. Slides over pipe for pitch up to 40 degrees. Non-fading, non-cracking and non-rusting bases and sealing collars. Ring on collar tears off, allowing flashings to seal different pipe diameters. Rated 180 degrees Fahrenheit continuous heat. Approved for Type B installations. Base made of .032 stamped aluminum. Not for hot-mopped or built-up roofs. Do not use petroleum based products on plastic bases or rubber collars.
All-Flash No-Calk 11931 Roof Flashing Midwest Products 17  Basswood Stanley 130765 Hinge Strap
Patented one-piece design; sealing collar will not come off. Capable of working on roof pitch from 2/12 (10 degrees) to 20/12 (60 degrees) without stress on collar. Tear-away ring on the collar provides options for sealing different pipe sizes and types. Larger thermoplastic base than normal NO-CAULK flashings. Never needs caulking. Sealing collar rides with pipe as it expands and contracts during temperature fluctuations. Double seal contact between pipe and collar, assuring a leak free seal. Will not rust, corrode, warp, or crack. Lays perfectly flat on the roof. Designed to seal all types of pipe such as copper, cast iron, plastic, aluminum, and galvanized. Not for hot-mopped or built-up roofs. Do not use petroleum based products on plastic bases or rubber collars. Basswood is perfect for almost any project that requires wood and can be painted or stained to represent any wood type. Bag contains 72 cubic inches. Designed for new installations with Stanley's 130708, 130559, 130583, and 130617 hooks. Strap punched for 5/16" (6" and 8" sizes) or 3/8" (10", 12", 14", 16" 18", 20" and 24" sizes) bolts.
Stanley 131409 Pintle HINGE STRAP GALV 5IN          Oatey 12936 Roof Flashing
STRAP HINGES 5IN GALV
Our Price: $8.88
Designed for use with Stanley's 130732, 131102, 248047, 131060, 248039, 130765, 168336, and 130799 hinge straps. Gate can be easily lifted off of pintle. Designed for heavy-duty gates and doors. Pintle punched for 5/16" (1/2" size) or 3/8" (5/8" size) bolts. Offset screw holes for extra strength and to prevent wood from splitting. Tight pin for left or right hand applications. Manufactured with hot-rolled steel. Slides over pipe for pitch to 40 degrees. Non-fading, self-sealing collar. Rated 180 degrees Fahrenheit continuous heat. Approved for Type B installations. Rustproof .032 stamped aluminum standard base. Not for hot-mopped or built-up roofs. Do not use petroleum based products on collars.
HINGE STRAP STEEL LD 6IN GALV American Wood DEFENCE1X6T Dog Ear Board American Wood PLCR1X6-4 4-Sided Sanded Common Board
Use in both the interior and exterior. Riveted brass pin. 1.8mm thickness. Tops are cut off at an angle. Sanded on 4 sides.
Oatey 12946 Roof Flashing Mintcraft LR096 Screw Hook Midwest Products 19  Balsa Wood
Slides over pipe for pitch to 40 degrees. Non-fading, self-sealing collar. Rated 180 degrees Fahrenheit continuous heat. Approved for Type B installations. Rustproof .032 stamped aluminum standard base. Not for hot-mopped or built-up roofs. Do not use petroleum based products on collars. Easily installs into wood surfaces. Replaces worn or broken bolt hooks. Can be used with strap hinges. Balsa is the premier wood for modeling and is also suited to almost any craft, art or school project; easy to cut and can be stained or painted to represent any wood type. Bag contains 72 cubic inches.
Mintcraft LR084 Bolt Hook Fasade 92318 Edge J-Trim Fasade 92817 Inside Corner Trim
Can be used with gate strap hinges to support wooden gates and fences. Can be easily adjusted. Used to provide a professionally finished edge for your "Fascade" backsplash project. Dimensions: 18" Length. Used to create inside corner return for your "Fascade" backsplash project. Dimensions: 18" Length.
Fasade 92818 Inside Corner Trim Fasade 92317 Edge J-Trim Fasade 92321 Edge J-Trim
Used to create inside corner return for your "Fascade" backsplash project. Dimensions: 18" Length. Used to provide a professionally finished edge for your "Fascade" backsplash project. Dimensions: 18" Length. Used to provide a professionally finished edge for your "Fascade" backsplash project. Dimensions: 18" Length.
Fasade 92821 Inside Corner Trim Builders Edge 130030002001 Recessed Mini Mounting Block Stanley 130799 Hinge Strap
Used to create inside corner return for your "Fascade" backsplash project. Dimensions: 18" Length. Used for installing short wire connections and hose bibs; decoratively provides a level and waterproof surface for all exterior fixtures; durable, maintenance-free, UV stabilized and constructed with color molded so they won't scratch, flake or fade; the patented snap-on trim ring makes installation easy; inner dimensions: 3" x 4-3/4"; outer dimensions: 4-1/2" x 6-5/16"; Limited  Lifetime warranty. Made in USA. Designed for new installations with Stanley's 130708, 130559, 130583, and 130617 hooks. Strap punched for 5/16" (6" and 8" sizes) or 3/8" (10", 12", 14", 16" 18", 20" and 24" sizes) bolts.
Stanley 130203 Screw Hook Stanley 130583 Full Threaded Bolt Hook Mintcraft LSH-Z02-013L Light Duty Strap Hinge
For use with new installations with Stanley's 130732, 131102, 248047, 131060, 130765, and 130799 hinge straps. Adjusts to correct gate sag. Adjust to correct gate sag. Includes 2 washers and 2 nuts per hook. Full threaded hook is bolted through the post and firmly secured with standard size nuts and washers on each side. As a replacement part: use with National's 292 Bold Hook. For new installations: use with National's #294 Hinge Straps. Use with the Stanley/National Strap size 14"(N130-799), 16"(N168-336), and the 18"(N248-039). Use in both the interior and exterior. Rust resistant.
Mintcraft LR086 Bolt Hook Stanley N128-322 Strap Hinge Builders Edge 130010001001 Scallop Mounting Block
STRAP HINGES 6IN GALV
Our Price: $10.07
Can be used with gate strap hinges to support wooden gates and fences. Can be easily adjusted. National Strap Hinge, Heavy Duty, Series: N128-322, Suitable For Use With: Barn, Shed Doors, Storage Bins, Tool Boxes and Gates, 4 Holes, 6 in Door Leaf, 2.43 in Door Leaf, Tight Pin, Brass Pin, Screw Mounting, Fasteners: NO 9 Screw, Steel, Galvanized Decoratively provides a level and waterproof surface for all exterior fixtures; durable, maintenance-free, UV stabilized and constructed with color molded so they won't scratch, flake or fade; the patented snap-on trim ring makes installation easy; inner dimensions: 5" x 6"; outer dimensions: 7" x 8"; Limited Lifetime warranty. Made in USA.
Midwest Products 5324  Craft Plywood HOOK SCREW/HINGE STRAP 10IN   Oatey 12958 Roof Flashing
Perfect for painting, staining, stenciling and wood burning; cuts easily with a saw and is suitable for both indoor and outdoor (must be sealed) use. Made with high quality birch veneer. Replaces worn or broken bolt hooks.  Can be used with strap hinges Slides over pipe for pitch to 40 degrees. Non-fading, self-sealing collar. Rated 180 degrees Fahrenheit continuous heat. Approved for Type B installations. Rustproof .032 stamped aluminum standard base. Not for hot-mopped or built-up roofs. Do not use petroleum based products on collars.
Midwest Products 5334  Craft Plywood Midwest Products 5304  Craft Plywood Builders Edge 130030003001 Wrap Around Mounting Block
Perfect for painting, staining, stenciling and wood burning; cuts easily with a saw and is suitable for both indoor and outdoor (must be sealed) use. Made with high quality birch veneer. Perfect for painting, staining, stenciling and wood burning; cuts easily with a saw and is suitable for both indoor and outdoor (must be sealed) use. Made with high quality birch veneer. Decoratively provides a level and waterproof surface for all exterior fixtures; durable, maintenance-free, UV stabilized and constructed with color molded so they won't scratch, flake or fade; the patented snap-on trim ring makes installation easy; fits around existing pipes, wires, etc.; inner dimensions: 3" x 4-3/4"; outer dimensions: 5" x 6-3/4"; Limited Lifetime warranty. Made in USA.
HINGE STRAP STEEL HD 4IN ZINC American Wood 2X6X8 Stud Grade Wood Molding HINGE STRAP STL HD 4IN BLACK
Ideal for doors, gates, sheds and toolboxes. Screws included. American Wood Wood Molding, Stud Grade, 2 in Thickness, 6 in Width, 8 ft Length Ideal for doors, gates, sheds and toolboxes. Screws included.
American Wood PLCR1X8-4 4-Sided Sanded Common Board Stanley 130641 Full Threaded Bolt Hook Thunderbird Forest 309534 Common Board
Sanded on 4 sides. Adjust to correct gate sag. Includes 2 washers and 2 nuts per hook. Full threaded hook is bolted through the post and firmly secured with standard size nuts and washers on each side. As a replacement part: use with National's 292 Bold Hook. For new installations: use with National's #294 Hinge Straps. Use with the Stanley/National Strap size 14"(N130-799), 16"(N168-336), and the 18"(N248-039). Alexandria Moulding Common Board, 1 in Thickness, 6 in Width, 8 ft Length, Pine, For Shelving and Household Projects
HOOK SCREW/HINGE STRAP 12IN   National Hardware 282BC Flush/Full Inset Strap Hinge American Wood STUD2X4X8T Stud Grade Wood Molding
STRAP HINGES 10IN ZN PLT
Our Price: $12.00
Replaces worn or broken bolt hooks.  Can be used with strap hinges National Hardware Strap Hinge, Flush/Full Inset, Heavy Duty, Series: 282BC, 0.36 in Hole Diameter, 0.14 in Leaf Thickness, 10 in Door Leaf Length, 3.68 in Door Leaf Width, 10 in Frame Leaf Length, 3.68 in Frame Leaf Width, 0.44 in Diameter Pin, Wall Mounting, 20 in Overall Width, Hot Rolled Steel, Zinc Plated, BHMA A138.18 American Wood Wood Molding, Stud Grade, 2 in Thickness, 4 in Width, 8 ft Length, Press Treated
American Wood PCLR1X6-6 4-Sided Sanded Common Board Stanley 168336 Hinge Strap American Wood OAK-1X4X4 Common Board
Sanded on 4 sides. Designed for new installations with Stanley's 130708, 130559, 130583, and 130617 hooks. Strap punched for 5/16" (6" and 8" sizes) or 3/8" (10", 12", 14", 16" 18", 20" and 24" sizes) bolts. American Wood Common Board, 1 in Thickness, 4 in Width, 4 ft Length, Oak
HINGE STRAP STL HD 6IN BLACK  HINGE S-H/STRP ZINC PLTD 6IN  Stanley 130674 Full Threaded Bolt Hook
Ideal for doors, gates, sheds and toolboxes. Screws included. Designed for use on gates, utility sheds, barn doors, etc. Adjusts to correct gate sag. Gate can be lifted off the screw hooks. Strap punched for 5/16 In. or 3/8 In. bolts. Mounting bolts are NOT included. Manufactured from hot-rolled steel. Boxed loose barcoded. Adjust to correct gate sag. Includes 2 washers and 2 nuts per hook. Full threaded hook is bolted through the post and firmly secured with standard size nuts and washers on each side. As a replacement part: use with National's 292 Bold Hook. For new installations: use with National's #294 Hinge Straps. Use with the Stanley/National Strap size 14"(N130-799), 16"(N168-336), and the 18"(N248-039).
BOARD HARDWOOD WHT 1X6INX4FT  Mintcraft LSH-Z03-013L Light Duty Strap Hinge HINGE S-H/STRP ZINC PLTD 8IN
White hardwood boards. Use in both the interior and exterior. Rust resistant. Designed for use on gates, utility sheds, barn doors, etc. Adjusts to correct gate sag. Gate can be lifted off the screw hooks. Strap punched for 5/16 In. or 3/8 In. bolts. Mounting bolts are NOT included. Manufactured from hot-rolled steel. Boxed loose barcoded.
HINGE STRAP GALV 8IN          American Wood PLCR1X8-6 4-Sided Sanded Common Board Midwest Products 5325  Craft Plywood
STRAP HINGES 8IN GALV
Our Price: $14.54
Offset screw holes for extra strength and to prevent wood from splitting. Tight pin for left or right hand applications. Manufactured with hot-rolled steel. Sanded on 4 sides. Perfect for painting, staining, stenciling and wood burning; cuts easily with a saw and is suitable for both indoor and outdoor (must be sealed) use. Made with high quality birch veneer.
Midwest Products 4044  Basswood Strips Builders Edge 130020001001 Jumbo Mounting Block WALL TILE STONE FROSTED QUARTZ
Has a close and tight homogeneous grain structure that makes it ideal for a wide variety of hobby, craft and miniature projects; may be painted or stained to represent any wood type; great finishing qualities; strong and lightweight. Used installing larger coach lamps and smaller electrical and water meters; decoratively provides a level and waterproof surface for all exterior fixtures; durable, maintenance-free, UV stabilized and constructed with color molded so they won't scratch, flake or fade; the patented snap-on trim ring makes installation easy; inner dimensions: 6" x 10"; outer dimensions: 8-1/8" x 12"; Limited Lifetime warranty. Made in USA. Perfect for backsplash, walls and accents; each tile covers 1 square foot; easy peel & stick application.
HINGE STRAP STEEL EX-HD 5IN SS National Hardware V281 Flush/Full Inset Strap Hinge American Wood PCOM-188 Common Board
STRAP HINGES 6IN SS
Our Price: $16.00
Ideal for doors, gates, sheds and toolboxes. Screws included. National Hardware Strap Hinge, Flush/Full Inset, Heavy Duty, Series: V281, 6 in Door Leaf Length, 6 in Frame Leaf Length, Fixed Pin, Wall Mounting, Stainless Steel, Stainless Steel, BHMA A138.18, For Commercial/Industrial and Residential Applications American Wood Common Board, 1 in Thickness, 8 in Width, 8 ft Length, Pine, 309535
Midwest Products 6049  Balsa Strips Stanley 248039 Hinge Strap Stanley 127357 Light Duty Strap Hinge
Grown in South American rain-forests, Midwest's Balsa is kiln-dried to produce a light-weight and high strength-to-weight ratio wood. Balsa cuts easily with a hobby knife and can be stained or painted to represent any wood type. It is the premier wood for modeling. Designed for new installations with Stanley's 130708, 130559, 130583, and 130617 hooks. Strap punched for 5/16" (6" and 8" sizes) or 3/8" (10", 12", 14", 16" 18", 20" and 24" sizes) bolts. Offset screw holes for extra strength and to prevent wood from splitting. Tight pin for left or right hand applications. Steel with aluminum pin. Safe working load: 18 lbs. Boxed loose.
Midwest Products 5314  Craft Plywood Midwest Products 5335  Craft Plywood Master Flash 14052 Roof Flashing
Perfect for painting, staining, stenciling and wood burning; cuts easily with a saw and is suitable for both indoor and outdoor (must be sealed) use. Made with high quality birch veneer. Perfect for painting, staining, stenciling and wood burning; cuts easily with a saw and is suitable for both indoor and outdoor (must be sealed) use. Made with high quality birch veneer. Split collar design easily installs on pipe with limited over-the-top access. Slides over pipe and conforms to any roof pitch. Use silicone sealant between base and surface and secure with sheet screws. Multi-size pipe sealing range. Molds to metal, plastic, etc. Non-fading EDPM collar. Rated 212 degrees Fahrenheit continuous heat. Resists weathering due to ozone and ultraviolet light. Approved for Type B installations. Not for hot-mopped or built-up roofs. Do not use paint or petroleum based products on collar.
Stanley 130708 Full Threaded Bolt Hook HINGE STRAP STEEL EX-HD 6IN SS HINGE STRAP STEEL EX-HD 4IN SS
Adjust to correct gate sag. Includes 2 washers and 2 nuts per hook. Full threaded hook is bolted through the post and firmly secured with standard size nuts and washers on each side. As a replacement part: use with National's 292 Bold Hook. For new installations: use with National's #294 Hinge Straps. Use with the Stanley/National Strap size 14"(N130-799), 16"(N168-336), and the 18"(N248-039). Ideal for doors, gates, sheds and toolboxes. Screws included. Ideal for doors, gates, sheds and toolboxes. Screws included.
Builders Edge 3SMR68P Sturdimount Builders Edge 3SMS68P Sturdimount Midwest Products 4022  Basswood Strips
Used for installing electrical boxes; easy installation; pre-assembled; pre-flashed; pre-painted; paintable and durable nailing flange; Limited Lifetime warranty. Used for installing spigots, gas lines, bib lines and door bells; easy installation; pre-assembled; pre-flashed; pre-painted; paintable and durable nailing flange; Limited Lifetime warranty. Has a close and tight homogeneous grain structure that makes it ideal for a wide variety of hobby, craft and miniature projects; may be painted or stained to represent any wood type; great finishing qualities; strong and lightweight.
Perma-Boot 5516 Permaboot Repair 0.03 ga T Perma-Boot 5521 Permaboot Repair 0.03 ga T Perma-Boot 5531 Permaboot Repair 0.03 ga T
A gasket-less two piece pipe boot repair system designed to repair the leak around the vent pipes that penetrate the roof; slides over the existing roof vent boot, preventing future leaks; easy installation and no tools required; designed for all standard roof pitches (3/12 to 12/12). Black. A gasket-less two piece pipe boot repair system designed to repair the leak around the vent pipes that penetrate the roof; slides over the existing roof vent boot, preventing future leaks; easy installation and no tools required; designed for all standard roof pitches (3/12 to 12/12). Black. A gasket-less two piece pipe boot repair system designed to repair the leak around the vent pipes that penetrate the roof; slides over the existing roof vent boot, preventing future leaks; easy installation and no tools required; designed for all standard roof pitches (3/12 to 12/12). Black.
Midwest Products 4025  Basswood Strips Midwest Products 5305  Craft Plywood Midwest Products 6044  Balsa Strips
Has a close and tight homogeneous grain structure that makes it ideal for a wide variety of hobby, craft and miniature projects; may be painted or stained to represent any wood type; great finishing qualities; strong and lightweight. Perfect for painting, staining, stenciling and wood burning; cuts easily with a saw and is suitable for both indoor and outdoor (must be sealed) use. Made with high quality birch veneer. Grown in South American rain-forests, Midwest's Balsa is kiln-dried to produce a light-weight and high strength-to-weight ratio wood. Balsa cuts easily with a hobby knife and can be stained or painted to represent any wood type. It is the premier wood for modeling.
HINGE STRAP STEEL HD 6IN GALV Midwest Products 6046  Balsa Strips HINGE S-H/STRP ZINC PLTD 10IN
Ideal for doors, gates, sheds and toolboxes. Screws included. Grown in South American rain-forests, Midwest's Balsa is kiln-dried to produce a light-weight and high strength-to-weight ratio wood. Balsa cuts easily with a hobby knife and can be stained or painted to represent any wood type. It is the premier wood for modeling. Designed for use on gates, utility sheds, barn doors, etc. Adjusts to correct gate sag. Gate can be lifted off the screw hooks. Strap punched for 5/16 In. or 3/8 In. bolts. Mounting bolts are NOT included. Manufactured from hot-rolled steel. Boxed loose barcoded.
Builders Edge 130010010001 Electrical Mounting Block Midwest Products 1126  Hobby & Craft Easy Cutters American Wood PLCR1X12-4 4-Sided Sanded Common Board
Electrical mounting block with UL listed 18 cu. in. outlet box; decoratively provides a level and waterproof surface for all exterior fixtures; durable, maintenance-free, UV stabilized and constructed with color molded so they won't scratch, flake or fade; the patented snap-on trim ring makes installation easy; can be used on standard or insulated siding; inner dimensions: 5" x 6"; outer dimensions: 7" x 8"; Limited Lifetime warranty. Made in USA. Original easy cutter makes cutting wood strips quick and accurate; built in protractor with 45, 60, 90 and 120? angles; replacement blades available. Sanded on 4 sides.
Mintcraft LSH-Z04-013L Light Duty Strap Hinge Builders Edge 3SMU811P4 Sturdimount HINGE STRAP ZINC PLATED 12IN
STRAP HINGES 12IN ZN PLT
Our Price: $21.52
Use in both the interior and exterior. Rust resistant. Used for installing standard lights and dryer vents; easy installation; pre-assembled; pre-flashed; pre-painted; paintable and durable nailing flange; Limited Lifetime warranty. National Strap Hinge, Heavy Duty, Wall Mounting, 12 in Overall Length, 12 ga Steel, Zinc-Plated, For Home, Farm, Builder or Industrial Customers
HINGE S-H/STRP ZINC PLTD 12IN Stanley 248047 Hinge Strap Midwest Products 4302  Basswood Sheets
Designed for use on gates, utility sheds, barn doors, etc. Adjusts to correct gate sag. Gate can be lifted off the screw hooks. Strap punched for 5/16 In. or 3/8 In. bolts. Mounting bolts are NOT included. Manufactured from hot-rolled steel. Boxed loose barcoded. Designed for new installations with Stanley's 130708, 130559, 130583, and 130617 hooks. Strap punched for 5/16" (6" and 8" sizes) or 3/8" (10", 12", 14", 16" 18", 20" and 24" sizes) bolts. Has a close and tight homogeneous grain structure that makes it ideal for a wide variety of hobby, craft and miniature projects; may be painted or stained to represent any wood type; great finishing qualities; strong and lightweight.
Midwest Products 5326  Craft Plywood Midwest Products 6099  Balsa Strips Master Flash 14053 Roof Flashing
Perfect for painting, staining, stenciling and wood burning; cuts easily with a saw and is suitable for both indoor and outdoor (must be sealed) use. Made with high quality birch veneer. Grown in South American rain-forests, Midwest's Balsa is kiln-dried to produce a light-weight and high strength-to-weight ratio wood. Balsa cuts easily with a hobby knife and can be stained or painted to represent any wood type. It is the premier wood for modeling. Split collar design easily installs on pipe with limited over-the-top access. Slides over pipe and conforms to any roof pitch. Use silicone sealant between base and surface and secure with sheet screws. Multi-size pipe sealing range. Molds to metal, plastic, etc. Non-fading EDPM collar. Rated 212 degrees Fahrenheit continuous heat. Resists weathering due to ozone and ultraviolet light. Approved for Type B installations. Not for hot-mopped or built-up roofs. Do not use paint or petroleum based products on collar.
Stanley 127506 Light Duty Strap Hinge Builders Edge 3SMO815P Oversize Sturdimount American Wood PCOM-1128 Common Board
Offset screw holes for extra strength and to prevent wood from splitting. Tight pin for left or right hand applications. Steel with aluminum pin. Safe working load: 18 lbs. Boxed loose. Used for installing Coach lights; easy installation; pre-assembled; pre-flashed; pre-painted; paintable and durable nailing flange; Limited Lifetime warranty. American Wood Common Board, 1 in Thickness, 12 in Width, 8 ft Length, Pine, 309536
American Wood OAK-1X8X4 Common Board Midwest Products 5336  Craft Plywood HINGE STRAP STEEL HD 8IN GALV
American Wood Common Board, 1 in Thickness, 8 in Width, 4 ft Length, Oak Perfect for painting, staining, stenciling and wood burning; cuts easily with a saw and is suitable for both indoor and outdoor (must be sealed) use. Made with high quality birch veneer. Ideal for doors, gates, sheds and toolboxes. Screws included.
Builders Edge 130110005001 Meter Block Midwest Products 5306  Craft Plywood Midwest Products 5315  Craft Plywood
Used for installing meters and extra large fixtures; decoratively provides a level and waterproof surface for all exterior fixtures; durable, maintenance-free, UV stabilized and constructed with color molded so they won't scratch, flake or fade; the patented snap-on trim ring makes installation easy; easily screw or nail onto any surface; dimensions: 15-1/2" x 16-1/2"; Limited Lifetime warranty. Made in USA. Perfect for painting, staining, stenciling and wood burning; cuts easily with a saw and is suitable for both indoor and outdoor (must be sealed) use. Made with high quality birch veneer. Perfect for painting, staining, stenciling and wood burning; cuts easily with a saw and is suitable for both indoor and outdoor (must be sealed) use. Made with high quality birch veneer.
Midwest Products 4306  Basswood Sheets Mintcraft LSH-Z06-013L Light Duty Strap Hinge Mintcraft HSH-Z04-013L Strap Hinge
Has a close and tight homogeneous grain structure that makes it ideal for a wide variety of hobby, craft and miniature projects; may be painted or stained to represent any wood type; great finishing qualities; strong and lightweight. Use in both the interior and exterior. Rust resistant. Reinforces doors, gates and sheds.
Mintcraft HSH-Z08-013L Strap Hinge American Wood 309572 Stud Grade Wood Molding Midwest Products 4402  Basswood Sheets
Reinforces doors, gates and sheds. American Wood Wood Molding, Stud Grade, American Wood, 2 in Thickness, 2 in Width, 8 ft Length Has a close and tight homogeneous grain structure that makes it ideal for a wide variety of hobby, craft and miniature projects; may be painted or stained to represent any wood type; great finishing qualities; strong and lightweight.
Midwest Products 6302  Balsa Sheets Mintcraft HSH-Z05-013L Strap Hinge TILE WALL BELLAGIO SABBIA 6PK
Grown in South American rain-forests, Midwest's Balsa is kiln-dried to produce a light-weight and high strength-to-weight ratio wood. Balsa cuts easily with a hobby knife and can be stained or painted to represent any wood type. It is the premier wood for modeling. Reinforces doors, gates and sheds. Do-it-yourself peel and stick tiles are lightweight, easy to handle, cut and maintain. Sticks without adding extra glue, does not yellow or crack with time. Can be installed in minutes over a clean and smooth surface without any mess or specialized tools. Designed for kitchen and bathroom environments (backsplashes), the tiles are resistant to the heat of stovetops and the humidity of bathrooms (do not use in shower). Tiles can be cut to size with a razor blade and a straight edge or a sharp pair of scissors.
TILE WALL KEYSTNE BELLAGIO 6PK Midwest Products 5316  Craft Plywood Midwest Products 4404  Basswood Sheets
Do-it-yourself peel and stick tiles are lightweight, easy to handle, cut and maintain. Sticks without adding extra glue, does not yellow or crack with time. Can be installed in minutes over a clean and smooth surface without any mess or specialized tools. Designed for kitchen and bathroom environments (backsplashes), the tiles are resistant to the heat of stovetops and the humidity of bathrooms (do not use in shower). Tiles can be cut to size with a razor blade and a straight edge or a sharp pair of scissors. Perfect for painting, staining, stenciling and wood burning; cuts easily with a saw and is suitable for both indoor and outdoor (must be sealed) use. Made with high quality birch veneer. Has a close and tight homogeneous grain structure that makes it ideal for a wide variety of hobby, craft and miniature projects; may be painted or stained to represent any wood type; great finishing qualities; strong and lightweight.
Retro Master Flash 14049 Retro Fit Adjustable Roof Flashing No-Calk 11841 Roof Flashing TILE WALL MILANO ARGENTO 6PK
Split collar design easily installs on pipe with limited over-the-top access. Slides over pipe and conforms to any roof pitch. Use silicone sealant between base and surface and secure with sheet screws. Multi-size pipe sealing range. Molds to metal, plastic, etc. Non-fading EDPM collar. Rated 212 degrees Fahrenheit continuous heat. Resists weathering due to ozone and ultraviolet light. Approved for Type B installations. Not for hot-mopped or built-up roofs. Do not use paint or petroleum based products on collar. Slides over pipe for pitch to 40 degrees. Non-fading, self-sealing collar. Rated 180 degrees Fahrenheit continuous heat. Approved for Type B installations. Rustproof, stamped galvanized, 24 gauge. Not for hot-mopped or built-up roofs. Do not use petroleum based products on collars. Do-it-yourself peel and stick tiles are lightweight, easy to handle, cut and maintain. Sticks without adding extra glue, does not yellow or crack with time. Can be installed in minutes over a clean and smooth surface without any mess or specialized tools. Designed for kitchen and bathroom environments (backsplashes), the tiles are resistant to the heat of stovetops and the humidity of bathrooms (do not use in shower). Tiles can be cut to size with a razor blade and a straight edge or a sharp pair of scissors.
Midwest Products 6303  Balsa Sheets TAPE ADHESIVE DBL SIDED 40FT  Midwest Products 6403  Balsa Sheets
Grown in South American rain-forests, Midwest's Balsa is kiln-dried to produce a light-weight and high strength-to-weight ratio wood. Balsa cuts easily with a hobby knife and can be stained or painted to represent any wood type. It is the premier wood for modeling. Use this Fascade double-sided tile backsplash adhesive tape to quickly and easily install Fascade thermoplastic backsplash panels to imbue a room with a stylish look. Dimensions: .075" W x 40' L. Grown in South American rain-forests, Midwest's Balsa is kiln-dried to produce a light-weight and high strength-to-weight ratio wood. Balsa cuts easily with a hobby knife and can be stained or painted to represent any wood type. It is the premier wood for modeling.
Mintcraft HSH-Z06-013L Strap Hinge No-Calk 11854 Roof Flashing American Wood 309570 Furring Strip
Reinforces doors, gates and sheds. Slides over pipe for pitch to 40 degrees. Non-fading, self-sealing collar. Rated 180 degrees Fahrenheit continuous heat. Approved for Type B installations. Rustproof, stamped galvanized, 24 gauge. Not for hot-mopped or built-up roofs. Do not use petroleum based products on collars. American Wood Furring Strip, American Wood, 1 in Thickness, 2 in Width, 8 ft Length
Midwest Products 6304  Balsa Sheets No-Calk 11867 Roof Flashing Midwest Products 6404  Balsa Sheets
Grown in South American rain-forests, Midwest's Balsa is kiln-dried to produce a light-weight and high strength-to-weight ratio wood. Balsa cuts easily with a hobby knife and can be stained or painted to represent any wood type. It is the premier wood for modeling. Slides over pipe for pitch to 40 degrees. Non-fading, self-sealing collar. Rated 180 degrees Fahrenheit continuous heat. Approved for Type B installations. Rustproof, stamped galvanized, 24 gauge. Not for hot-mopped or built-up roofs. Do not use petroleum based products on collars. Grown in South American rain-forests, Midwest's Balsa is kiln-dried to produce a light-weight and high strength-to-weight ratio wood. Balsa cuts easily with a hobby knife and can be stained or painted to represent any wood type. It is the premier wood for modeling.
Midwest Products 5245  Craft Plywood Midwest Products 6402  Balsa Sheets No-Calk 11880 Roof Flashing
Perfect for painting, staining, stenciling and wood burning; cuts easily with a saw and is suitable for both indoor and outdoor (must be sealed) use. Made with high quality birch veneer. Grown in South American rain-forests, Midwest's Balsa is kiln-dried to produce a light-weight and high strength-to-weight ratio wood. Balsa cuts easily with a hobby knife and can be stained or painted to represent any wood type. It is the premier wood for modeling. Slides over pipe for pitch to 40 degrees. Non-fading, self-sealing collar. Rated 180 degrees Fahrenheit continuous heat. Approved for Type B installations. Rustproof, stamped galvanized, 24 gauge. Not for hot-mopped or built-up roofs. Do not use petroleum based products on collars.
TILE WALL METALLIK MURANO     Mintcraft HSH-Z10-013L Strap Hinge TILE WALL DURANGO MURETTO 1PK
Do-it-yourself peel and stick tiles are lightweight, easy to handle, cut and maintain. Sticks without adding extra glue, does not yellow or crack with time. Can be installed in minutes over a clean and smooth surface without any mess or specialized tools. Designed for kitchen and bathroom environments (backsplashes), the tiles are resistant to the heat of stovetops and the humidity of bathrooms (do not use in shower). Tiles can be cut to size with a razor blade and a straight edge or a sharp pair of scissors. Reinforces doors, gates and sheds. Do-it-yourself peel and stick tiles are lightweight, easy to handle, cut and maintain. Sticks without adding extra glue, does not yellow or crack with time. Can be installed in minutes over a clean and smooth surface without any mess or specialized tools. Designed for kitchen and bathroom environments (backsplashes), the tiles are resistant to the heat of stovetops and the humidity of bathrooms (do not use in shower). Tiles can be cut to size with a razor blade and a straight edge or a sharp pair of scissors.
American Wood FUR1X3X8 Furring Strip TILE WALL KEYSTONE BELLAGIO   TILE WALL METRO CARREA
American Wood Furring Strip, 1 in Thickness, 3 in Width, 8 ft Length, 309571 Do-it-yourself peel and stick tiles are lightweight, easy to handle, cut and maintain. Sticks without adding extra glue, does not yellow or crack with time. Can be installed in minutes over a clean and smooth surface without any mess or specialized tools. Designed for kitchen and bathroom environments (backsplashes), the tiles are resistant to the heat of stovetops and the humidity of bathrooms (do not use in shower). Tiles can be cut to size with a razor blade and a straight edge or a sharp pair of scissors. Do-it-yourself peel and stick tiles are lightweight, easy to handle, cut and maintain. Sticks without adding extra glue, does not yellow or crack with time. Can be installed in minutes over a clean and smooth surface without any mess or specialized tools. Designed for kitchen and bathroom environments (backsplashes), the tiles are resistant to the heat of stovetops and the humidity of bathrooms (do not use in shower). Tiles can be cut to size with a razor blade and a straight edge or a sharp pair of scissors.
TILE WALL MILANO BLANCO       TILE WALL MILANO AVORIO       TILE WALL BELLAGIO SABBIA 1PK
Do-it-yourself peel and stick tiles are lightweight, easy to handle, cut and maintain. Sticks without adding extra glue, does not yellow or crack with time. Can be installed in minutes over a clean and smooth surface without any mess or specialized tools. Designed for kitchen and bathroom environments (backsplashes), the tiles are resistant to the heat of stovetops and the humidity of bathrooms (do not use in shower). Tiles can be cut to size with a razor blade and a straight edge or a sharp pair of scissors. Do-it-yourself peel and stick tiles are lightweight, easy to handle, cut and maintain. Sticks without adding extra glue, does not yellow or crack with time. Can be installed in minutes over a clean and smooth surface without any mess or specialized tools. Designed for kitchen and bathroom environments (backsplashes), the tiles are resistant to the heat of stovetops and the humidity of bathrooms (do not use in shower). Tiles can be cut to size with a razor blade and a straight edge or a sharp pair of scissors. Do-it-yourself peel and stick tiles are lightweight, easy to handle, cut and maintain. Sticks without adding extra glue, does not yellow or crack with time. Can be installed in minutes over a clean and smooth surface without any mess or specialized tools. Designed for kitchen and bathroom environments (backsplashes), the tiles are resistant to the heat of stovetops and the humidity of bathrooms (do not use in shower). Tiles can be cut to size with a razor blade and a straight edge or a sharp pair of scissors.
TILE WALL MILANO ARGENTO      WALL TILE STONE MEDLEY SLATE  WALL TILE PEEL/STK WEATHER QTZ
Do-it-yourself peel and stick tiles are lightweight, easy to handle, cut and maintain. Sticks without adding extra glue, does not yellow or crack with time. Can be installed in minutes over a clean and smooth surface without any mess or specialized tools. Designed for kitchen and bathroom environments (backsplashes), the tiles are resistant to the heat of stovetops and the humidity of bathrooms (do not use in shower). Tiles can be cut to size with a razor blade and a straight edge or a sharp pair of scissors. Perfect for backsplash, walls and accents; each tile covers 1 square foot; easy peel & stick application. Perfect for backsplash, walls and accents; each tile covers 1 square foot; easy peel & stick application.
Aspect A52-50 Long Grain Peel and Stick Wall Tile Aspect A95-50 Subway Matted Peel and Stick Wall Tile TILE EDGE BRILLO SELFSTICK18IN
DIY, easy to install decorative metal tile can be used in multiple applications including backsplash, walls, cabinets, toe-kicks, details, accents and more. Mix & match finishes and grain directions to create your own personal look. 1 packet covers 1 square foot. Dimensions: 3" x 6" metal (8 per pack). DIY, easy to install decorative metal tile can be used in multiple applications including backsplash, walls, cabinets, toe-kicks, details, accents and more. Mix & match finishes and grain directions to create your own personal look. 1 packet covers 1 square foot. Dimensions: 12.5" x 4" metal (3 per pack). Do-it-yourself peel and stick tiles are lightweight, easy to handle, cut and maintain. Sticks without adding extra glue, does not yellow or crack with time. Can be installed in minutes over a clean and smooth surface without any mess or specialized tools. Designed for kitchen and bathroom environments (backsplashes), the tiles are resistant to the heat of stovetops and the humidity of bathrooms (do not use in shower). Tiles can be cut to size with a razor blade and a straight edge or a sharp pair of scissors.
TILE EDGE AMBRA SELFSTICK 18IN Mintcraft HSH-Z12-013L Strap Hinge GAF 2213000WG Straight Edge Shingle Siding
Do-it-yourself peel and stick tiles are lightweight, easy to handle, cut and maintain. Sticks without adding extra glue, does not yellow or crack with time. Can be installed in minutes over a clean and smooth surface without any mess or specialized tools. Designed for kitchen and bathroom environments (backsplashes), the tiles are resistant to the heat of stovetops and the humidity of bathrooms (do not use in shower). Tiles can be cut to size with a razor blade and a straight edge or a sharp pair of scissors. Reinforces doors, gates and sheds. Replacement for asbestos siding shingles found on older style houses or for new construction. Siding won't warp, dent, rot, shrink, or expand and resist termites. Contains no asbestos. Fire-proof, durable, and resistant to freeze-thaw conditions. Tough and durable, even for commercial applications. Paintable. 11" exposure and 11/64" thick. Shingles are packed in case with handle. Meets and exceeds UL approved noncombustible testing (ASTM E 136, UL 723, CAN/ULC-S102M88).
GAF 2214000WG Wavy Edge Shingle Siding Fasade D6021 Backsplash Panel Fasade D6018 Backsplash Panel
Replacement for asbestos siding shingles found on older style houses or for new construction. Siding won't warp, dent, rot, shrink, or expand and resist termites. Contains no asbestos. Fire-proof, durable, and resistant to freeze-thaw conditions. Tough and durable, even for commercial applications. Paintable. 11" exposure and 11/64" thick. Shingles are packed in a case with handle. Meets and exceeds UL approved noncombustible testing (ASTM E 136, UL 723, CAN/ULC-S102M88). For kitchen or bathroom use. Perfect for remodeling or new construction. No contractor required; suitable for wet environments with resistance to impacts and stains; these thermoplastic panels provide the classic look of tin at a fraction of the cost. Dimensions: 18" x 24". For kitchen or bathroom use. Perfect for remodeling or new construction. No contractor required; suitable for wet environments with resistance to impacts and stains; these thermoplastic panels provide the classic look of tin at a fraction of the cost. Dimensions: 18" x 24".
Fasade D6121 Backsplash Panel