Home > HARDWARE > CONSTRUCTION HARDWARE > LUMBER / MOLDING/TRIM > WOOD LAMINATE
Sort By:
1
HINGE NRW ZINC PLATED 1-1/2IN HINGE NRW ZINC PLATED 1IN     T-HINGE ZINC PLATED 2IN
T HINGES 2IN ZN PLT
Our Price: $1.65
518. Swaged for mortise installations. Manufactured from cold-rolled steel, with non-removable steel pin. Tight pin to allow for left or right hand applications. Boxed loose. 518. Swaged for mortise installations. Manufactured from cold-rolled steel, with non-removable steel pin. Tight pin to allow for left or right hand applications. Boxed loose. Offset screw holes for extra strength and to prevent wood from splitting. Tight pin for left or right hand applications. Steel with aluminum pin. Safe working load: 18 lbs. Visual-pack.
HINGE NRW ZINC PLATED 1-1/2IN National Hardware 284BC Flush/Full Inset Light T Hinge HINGE NRW ZINC PLATED 2IN
T HINGES 3IN ZN PLT
Our Price: $1.89
518. Swaged for mortise installations. Manufactured from cold-rolled steel, with non-removable steel pin. Tight pin to allow for left or right hand applications. Boxed loose. National Hardware T Hinge, Flush/Full Inset, Light, Series: 284BC, 6 Holes, 0.21 in Hole Diameter, 0.056 in Leaf Thickness, 3 in Door Leaf Length, 0.69 in Frame Leaf Length, 2.24 in Frame Leaf Width, 0.17 in Diameter Pin, Aluminum Pin, Wall Mounting, Fasteners: NO 6 Flat Headed Screw, 18 lb Load Capacity, 2.34 in Overall Width, Hot Rolled Steel 518. Swaged for mortise installations. Manufactured from cold-rolled steel, with non-removable steel pin. Tight pin to allow for left or right hand applications. Boxed loose.
HINGE NRW ZINC PLATED 2-1/2IN T-HINGE ZINC PLATED 4IN       HINGE UTILITY STEEL 2X2IN ZN
T HINGES 4IN ZN PLT
Our Price: $2.38
518. Swaged for mortise installations. Manufactured from cold-rolled steel, with non-removable steel pin. Tight pin to allow for left or right hand applications. Boxed loose. Offset screw holes for extra strength and to prevent wood from splitting. Tight pin for left or right hand applications. Steel with aluminum pin. Safe working load: 18 lbs. Visual-pack. Five knuckle full mortise design. Allows easy installation or removal of lightweight doors. Screws included.
HASP SAFETY ZINC PLT 2-1/2IN  HINGE UTL STL ZN PLTD 1INX1IN HINGE UTILITY SQ CNR 2X1-1/2IN
Non- swiveling. Adds security for doors, cabinets and gates. Rust resistant. Lightweight steel construction. 3 Knuckles. Lightweight steel construction. 3 Knuckles.
HINGE NRW ZINC PLATED 3IN     HINGE UTL ZN PLT 1-1/2X1-3/8IN T-HINGE ZINC PLATED 5IN
T HINGES 5IN ZN PLT
Our Price: $3.03
518. Swaged for mortise installations. Manufactured from cold-rolled steel, with non-removable steel pin. Tight pin to allow for left or right hand applications. Boxed loose. Lightweight steel construction. 3 Knuckles. Offset screw holes for extra strength and to prevent wood from splitting. Tight pin for left or right hand applications. Steel with aluminum pin. Safe working load: 18 lbs. Visual-pack.
T-HINGE LD STEEL 2IN ZINC PLTD HINGE UTL SQ CNR ZN STL 1X1IN Stanley 139659 Door Hinge
For use on tool boxes, storage chests and small shed doors. Five knuckle full mortise design. Allows easy installation or removal of lightweight cabinet doors. Screws included. 504. Designed for general utility and industrial applications. Hinges are swaged for mortise installations. Loose pin allows doors to be removed without taking off hinges. Plain steel version can be welded. Boxed.
National Hardware V30 Non-Swivel Safety Hasp HINGE BRD PLN STL 2IN         HASP SAFETY GALV 2-1/2IN
National Hardware Safety Hasp, Non-Swivel, Series: V30, 0.34 in Diameter X 0.62 in Height Shackle, 2.43 in Length, 3/4 in Height, Hot Rolled Steel, Zinc Plated, Includes: Rigid Non-Swivel Staple, BHMA A138.18 Certified, 1-3/4 in, For Securing a Wide Variety of Doors, Cabinets, Boxes and Trunks 505. Swaged for mortise installations. Manufactured with cold rolled steel. Five knuckle, full mortise design. Riveted, non-removable pin. Boxed loose barcoded. Non- swiveling. Adds security for doors, cabinets and gates. Rust resistant.
National Hardware V30 Non-Swivel Safety Hasp HINGE UTILITY 2-1/2X2-1/2IN ZN HINGE UTL SQ CNR ZN PLT 3X2IN
National Hardware Safety Hasp, Non-Swivel, Series: V30, 0.35 in Diameter X 0.7 in Height Shackle, 3.57 in Length, 1 in Height, Hot Rolled Steel, Zinc Plated, Includes: Rigid Non-Swivel Staple, BHMA A138.18 Certified, 2-1/2 in, For Securing a Wide Variety of Doors, Cabinets, Boxes and Trunks Five knuckle full mortise design. Allows easy installation or removal of lightweight doors. Screws included. Lightweight steel construction. 3 Knuckles.
T-HINGE ZINC PLATED 6IN       HASP SAFETY 3IN ZN PLT STEEL  HINGE BRD ZINC PLATED 2IN
T HINGES 6IN ZN PLT
Our Price: $3.56
BROAD HINGES 2IN ZN PLT
Our Price: $3.60
Offset screw holes for extra strength and to prevent wood from splitting. Tight pin for left or right hand applications. Steel with aluminum pin. Safe working load: 18 lbs. Visual-pack. Use on doors, cabinets and gates with a 90 degree corner. Rust resistant. 504. Swaged for mortise installations. Manufactured with cold rolled steel. Five knuckle, full mortise design. Loose pin allows doors to be removed without removing hinge. Boxed loose barcoded.
HINGE BRD ZINC PLATED 2IN     Walltuf 92586 Inside Corner Molding Wall-Tuff 92588 Cap Molding
BROAD HINGES 2IN ZN PLT
Our Price: $3.68
National Hardware Door Hinge, Series: 505BC, Full Mortise, 4 Holes, 0.3125 in Hole Diameter, 0.77 in Leaf Thickness, Non-Removable, Riveted Pin, 0.19 in Dia Pin, Fasteners: 5-Knuckle, 38 lb Load Capacity, 2 in Overall Length, 2 in Overall Width, Cold Rolled Steel, Zinc Plated, Standards: BHMA A138.18 Trims out panels and helps achieve a water resistant finished wall. For use with "Walltuf" liner panels. Trims out panels and helps achieve a water resistant finished wall. For use with "Walltuf" liner panels.
Walltuf 92587 Outside Corner Molding National Hardware V30 Non-Swivel Safety Hasp Stanley 131193 Hinge Screw Eye
Trims out panels and helps achieve a water resistant finished wall. For use with "Walltuf" liner panels. National Hardware Safety Hasp, Non-Swivel, Series: V30, 0.44 in Diameter X 0.9 in Height Shackle, 4.56 in Length, 1-1/2 in Height, Hot Rolled Steel, Zinc Plated, Includes: Rigid Non-Swivel Staple, BHMA A138.18 Certified, 3-1/4 in, For Securing a Wide Variety of Doors, Cabinets, Boxes and Trunks To be used in wood gate applications in conjunction with screw hooks, bolt hooks and pintles.
HASP SAFETY ADJ ZINC 3-1/2IN  HINGE UTL SQ CNR Z 1-1/2X1-3/8 National Hardware N145-920 Flush/Full Inset Square Corner Narrow Hinge
Screws are concealed when hasp is locked. Rust resistant. Zinc plated. Adjustable staple. Five knuckle full mortise design. Allows easy installation or removal of lightweight cabinet doors. Screws included. National Hardware Narrow Hinge, Flush/Full Inset, Square Corner, Series: V518, 4 Holes, 0.16 in Hole Diameter, 0.05 in Leaf Thickness, 1 in Door Leaf Length, 1 in Frame Leaf Length, Non-Removable Pin, 0.1 in Diameter Pin, Steel Pin, Wall Mounting, Fasteners: Screws, 7 lb Load Capacity, 1 in Overall Width, Cold Rolled Steel, Zinc Plated
Stanley 130112 Screw Hook HINGE UTL GALV 2-1/2X2-1/2IN  Stanley 139733 Weldable Door Hinge
For use with new installations with Stanley's 130732, 131102, 248047, 131060, 130765, and 130799 hinge straps. Adjusts to correct gate sag. Five knuckle full mortise design. Allows easy installation or removal of lightweight doors. Screws included. 504. Designed for general utility and industrial applications. Hinges are swaged for mortise installations. Loose pin allows doors to be removed without taking off hinges. Plain steel version can be welded. Boxed.
HASP SAFETY ZINC STEEL 3-1/2IN HINGE UTL SQ CNR ZN 2X1-1/2IN National Hardware N146-043 Flush/Full Inset Square Corner Narrow Hinge
Use on cabinets, doors and gates. Mounting screws are concealed when the hasp is closed. Five knuckle full mortise design. Allows easy installation or removal of lightweight cabinet doors. Screws included. National Hardware Narrow Hinge, Flush/Full Inset, Square Corner, Series: V518, 4 Holes, 0.2 in Hole Diameter, 0.05 in Leaf Thickness, 1-1/2 in Door Leaf Length, 1-1/2 in Frame Leaf Length, Non-Removable Pin, 0.11 in Diameter Pin, Steel Pin, Wall Mounting, Fasteners: Screws, 7 lb Load Capacity, 1-1/2 in Overall Width, Cold Rolled Steel, Zinc Plated
HINGE BRD ZINC PLATED 2-1/2IN National Hardware V30 Non-Swivel Safety Hasp National Hardware N145-946 Flush/Full Inset Square Corner Narrow Hinge
NARROW HINGES 1IN BRS
Our Price: $4.07
504. Swaged for mortise installations. Manufactured with cold rolled steel. Five knuckle, full mortise design. Loose pin allows doors to be removed without removing hinge. Boxed loose barcoded. National Hardware Safety Hasp, Non-Swivel, Series: V30, 0.35 in Diameter X 0.7 in Height Shackle, 3.57 in Length, 1 in Height, Hot Rolled Steel, Brass, Includes: Rigid Non-Swivel Staple, 2-1/2 in, For Securing a Wide Variety of Doors, Cabinets, Boxes and Trunks National Hardware Narrow Hinge, Flush/Full Inset, Square Corner, Series: V518, 4 Holes, 0.16 in Hole Diameter, 0.05 in Leaf Thickness, 1 in Door Leaf Length, 1 in Frame Leaf Length, Non-Removable Pin, 0.1 in Diameter Pin, Steel Pin, Wall Mounting, Fasteners: Screws, 7 lb Load Capacity, 1 in Overall Width, Cold Rolled Steel, Brass
Walltuf 92589 Divider Molding Stanley 139808 Door Hinge Master Lock 702D High Security Hasp
Trims out panels and helps achieve a water resistant finished wall. For use with "Walltuf" liner panels. 504. Designed for general utility and industrial applications. Hinges are swaged for mortise installations. Loose pin allows doors to be removed without taking off hinges. Plain steel version can be welded. Boxed. High security pinless hinge.
HINGE BRD PLN STL 3IN         HINGE BRD ZINC PLATED 2-1/2IN HASP SAFETY ZINC PLT 3-1/2IN
505. Swaged for mortise installations. Manufactured with cold rolled steel. Five knuckle, full mortise design. Riveted, non-removable pin. Boxed loose barcoded. National Hardware Door Hinge, Series: 505BC, Full Mortise, 6 Holes, 0.23 in Hole Diameter, 0.09 in Leaf Thickness, Non-Removable, Riveted Pin, 0.21 in Dia Pin, Fasteners: 5-Knuckle, 43 lb Load Capacity, 2-1/2 in Overall Length, 2.61 in Overall Width, Cold Rolled Steel, Zinc Plated, Standards: BHMA A138.18 Non- swiveling. Adds security for doors, cabinets and gates. Rust resistant.
National Hardware N146-159 Flush/Full Inset Square Corner Narrow Hinge National Hardware N146-068 Flush/Full Inset Square Corner Narrow Hinge National Hardware N146-258 Flush/Full Inset Square Corner Narrow Hinge
National Hardware Narrow Hinge, Flush/Full Inset, Square Corner, Series: V518, 4 Holes, 0.23 in Hole Diameter, 0.06 in Leaf Thickness, 2 in Door Leaf Length, 2 in Frame Leaf Length, Non-Removable Pin, 0.12 in Diameter Pin, Steel Pin, Wall Mounting, Fasteners: Screws, 10 lb Load Capacity, 2 in Overall Width, Cold Rolled Steel, Zinc Plated National Hardware Narrow Hinge, Flush/Full Inset, Square Corner, Series: V518, 4 Holes, 0.2 in Hole Diameter, 0.05 in Leaf Thickness, 1-1/2 in Door Leaf Length, 1-1/2 in Frame Leaf Length, Non-Removable Pin, 0.11 in Diameter Pin, Steel Pin, Wall Mounting, Fasteners: Screws, 7 lb Load Capacity, 1-1/2 in Overall Width, Cold Rolled Steel, Dull Brass National Hardware Narrow Hinge, Flush/Full Inset, Square Corner, Series: V518, 6 Holes, 1/4 in Hole Diameter, 0.06 in Leaf Thickness, 2-1/2 in Door Leaf Length, 2-1/2 in Frame Leaf Length, Non-Removable Pin, 0.12 in Diameter Pin, Steel Pin, Wall Mounting, Fasteners: Screws, 20 lb Load Capacity, 2-1/2 in Overall Width, Cold Rolled Steel, Zinc Plated
National Hardware N141-622 Narrow Hinge HASP SAFETY ZN STL 4-1/2IN    National Hardware N141-606 Narrow Hinge
NARROW HINGES 1IN BRS
Our Price: $4.33
National Hardware Narrow Hinge, Full Mortise, Series: V508, Knuckle Bearing, 4 Holes, 0.16 in Hole Diameter, 0.05 in Leaf Thickness, 1 in Door Leaf Length, 1 in Frame Leaf Length, Removable Pin, 0.1 in Diameter Pin, Wall Mounting, Fasteners: (5) Knuckle, Screws, 7 lb Load Capacity, 1 in Overall Width, Cold Rolled Steel, Brass Screws are concealed when hasp is locked. Rust resistant. Zinc plated. Adjustable staple. National Hardware Narrow Hinge, Full Mortise, Series: V508, Knuckle Bearing, 4 Holes, 0.16 in Hole Diameter, 0.05 in Leaf Thickness, 1 in Door Leaf Length, 1 in Frame Leaf Length, Removable Pin, 0.1 in Diameter Pin, Wall Mounting, Fasteners: (5) Knuckle, Screws, 7 lb Load Capacity, 1 in Overall Width, Cold Rolled Steel, Zinc Plated
National Hardware N141-838 Narrow Hinge Stanley 139873 Door Hinge HINGE BRD PLN STL 3-1/2IN
National Hardware Narrow Hinge, Full Mortise, Series: V508, Knuckle Bearing, 4 Holes, 0.23 in Hole Diameter, 0.06 in Leaf Thickness, 2 in Door Leaf Length, 2 in Frame Leaf Length, Removable Pin, 0.12 in Diameter Pin, Wall Mounting, Fasteners: (5) Knuckle, Screws, 10 lb Load Capacity, 1.56 in Overall Width, Cold Rolled Steel, Zinc Plated 504. Designed for general utility and industrial applications. Hinges are swaged for mortise installations. Loose pin allows doors to be removed without taking off hinges. Plain steel version can be welded. Boxed. 505. Swaged for mortise installations. Manufactured with cold rolled steel. Five knuckle, full mortise design. Riveted, non-removable pin. Boxed loose barcoded.
National Hardware N141-739 Narrow Hinge National Hardware N146-175 Flush/Full Inset Square Corner Narrow Hinge HINGE UTILITY STEEL 3X3IN ZN
NARROW HINGES 2IN BRS
Our Price: $4.58
National Hardware Narrow Hinge, Full Mortise, Series: V508, Knuckle Bearing, 4 Holes, 0.2 in Hole Diameter, 0.05 in Leaf Thickness, 1-1/2 in Door Leaf Length, 1-1/2 in Frame Leaf Length, Removable Pin, 0.11 in Diameter Pin, Wall Mounting, Fasteners: (5) Knuckle, Screws, 7 lb Load Capacity, 1.42 in Overall Width, Cold Rolled Steel, Zinc Plated National Hardware Narrow Hinge, Flush/Full Inset, Square Corner, Series: V518, 4 Holes, 0.23 in Hole Diameter, 0.06 in Leaf Thickness, 2 in Door Leaf Length, 2 in Frame Leaf Length, Non-Removable Pin, 0.12 in Diameter Pin, Steel Pin, Wall Mounting, Fasteners: Screws, 10 lb Load Capacity, 2 in Overall Width, Cold Rolled Steel, Dull Brass Five knuckle full mortise design. Allows easy installation or removal of lightweight doors. Screws included.
Mintcraft LR083 Bolt Hook HASP SAFETY ZINC PLT FN 4-1/2 T-HINGE LD STEEL 3IN ZINC PLTD
Can be used with gate strap hinges to support wooden gates and fences. Can be easily adjusted. Non- swiveling. Adds security for doors, cabinets and gates. Rust resistant. For use on tool boxes, storage chests and small shed doors.
Stanley 130146 Screw Hook National Hardware 286BC Extra Heavy Flush/Full Inset T Hinge HASP SAFETY 4-1/2IN ZINC STL
T HINGES 4IN ZN PLT
Our Price: $4.71
For use with new installations with Stanley's 130732, 131102, 248047, 131060, 130765, and 130799 hinge straps. Adjusts to correct gate sag. National Hardware T Hinge, Extra Heavy, Flush/Full Inset, Series: 286BC, 0.076 in Leaf Thickness, 4 in Door Leaf Length, 1.55 in Door Leaf Width, 3.3 in Frame Leaf Length, 1.32 in Frame Leaf Width, 0.222 in Diameter Pin, Wall Mounting, Fasteners: NO 9 Flat Head Screw, 60 lb Load Capacity, Hot Rolled Steel, Zinc Plated, BHMA A138.18 Use on doors, cabinets and gates with a 90 degree corner. Rust resistant.
Mintcraft LR094 Screw Hook HINGE BRD ZINC PLATED 3IN     T-HINGE LD STEEL 4IN ZINC PLTD
BROAD HINGES 3IN ZN PLT
Our Price: $4.80
Easily installs into wood surfaces. Replaces worn or broken bolt hooks. Can be used with strap hinges. 504. Swaged for mortise installations. Manufactured with cold rolled steel. Five knuckle, full mortise design. Loose pin allows doors to be removed without removing hinge. Boxed loose barcoded. For use on tool boxes, storage chests and small shed doors.
National Hardware N141-754 Narrow Hinge National Hardware 505BC Flush/Full Inset Broad Hinge Hi-Security 703D High Security Latching Hasp
BROAD HINGES 3IN ZN PLT
Our Price: $4.88
National Hardware Narrow Hinge, Full Mortise, Series: V508, Knuckle Bearing, 4 Holes, 0.2 in Hole Diameter, 0.05 in Leaf Thickness, 1-1/2 in Door Leaf Length, 1-1/2 in Frame Leaf Length, Removable Pin, 0.11 in Diameter Pin, Wall Mounting, Fasteners: (5) Knuckle, Screws, 7 lb Load Capacity, 1.42 in Overall Width, Cold Rolled Steel, Brass National Hardware Broad Hinge, Flush/Full Inset, Series: 505BC, 6 Holes, 0.08 in Leaf Thickness, 3 in Door Leaf Length, 3 in Frame Leaf Length, Riveted, Non-Removable Pin, 0.234 in Diameter Pin, Wall Mounting, 50 lb Load Capacity, 3 in Overall Width, Cold Rolled Steel, Zinc Plated, BHMA A138.18, For Mortise Installations High security pinless hinge.
HASP SAFETY ZINC STEEL 4-1/2IN National Hardware V30 Non-Swivel Safety Hasp Stanley 131060 Hinge Strap
Use on cabinets, doors and gates. Mounting screws are concealed when the hasp is closed. National Hardware Safety Hasp, Non-Swivel, Series: V30, 0.44 in Diameter X 0.9 in Height Shackle, 4.56 in Length, 1-1/2 in Height, Hot Rolled Steel, Brass, Includes: Rigid Non-Swivel Staple, 3-1/4 in, For Securing a Wide Variety of Doors, Cabinets, Boxes and Trunks Designed for new installations with Stanley's 130708, 130559, 130583, and 130617 hooks. Strap punched for 5/16" (6" and 8" sizes) or 3/8" (10", 12", 14", 16" 18", 20" and 24" sizes) bolts.
HINGE UTL SQ CNR 2-1/2X1-11/16 Hi-Security 704D High Security Latching Hasp National Hardware N141-945 Narrow Hinge
Lightweight steel construction. 3 Knuckles. High security pinless hinge. National Hardware Narrow Hinge, Full Mortise, Series: V508, Knuckle Bearing, 6 Holes, 0.23 in Hole Diameter, 0.06 in Leaf Thickness, 2-1/2 in Door Leaf Length, 2-1/2 in Frame Leaf Length, Removable Pin, 0.12 in Diameter Pin, Wall Mounting, Fasteners: (5) Knuckle, Screws, 20 lb Load Capacity, 1.68 in Overall Width, Cold Rolled Steel, Zinc Plated
HINGE UTL SQ CNR 2-1/2X1-11/16 Stanley 131227 Hinge Screw Eye HASP SAFETY SAT BRS 2-1/2X1IN
Five knuckle full mortise design. Allows easy installation or removal of lightweight cabinet doors. Screws included. To be used in wood gate applications in conjunction with screw hooks, bolt hooks and pintles. Fixed staple. Use on doors, cabinets and gates.
National Hardware V30 Non-Swivel Safety Hasp National Hardware V30 Corrosion Resistant Safety Hasp National Hardware N146-373 Flush/Full Inset Square Corner Narrow Hinge
National Hardware Safety Hasp, Non-Swivel, Series: V30, 0.44 in Diameter X 0.9 in Height Shackle, 5.68 in Length, 1-1/2 in Height, Hot Rolled Steel, Zinc Plated, Includes: Rigid Non-Swivel Staple, BHMA A138.18 Certified, 4-1/2 in, For Securing a Wide Variety of Doors, Cabinets, Boxes and Trunks National Hardware Safety Hasp, Corrosion Resistant, Series: V30, 0.44 in Diameter Shackle, 4.56 in Length, 1-1/2 in Height, Hot Rolled Steel, Black, Includes: Rigid Non-Swivel Staple, For Doors, Cabinets, Boxes and Trunks National Hardware Narrow Hinge, Flush/Full Inset, Square Corner, Series: V518, 6 Holes, 1/4 in Hole Diameter, 0.07 in Leaf Thickness, 3 in Door Leaf Length, 3 in Frame Leaf Length, Non-Removable Pin, 0.16 in Diameter Pin, Steel Pin, Wall Mounting, Fasteners: Screws, 28 lb Load Capacity, 3 in Overall Width, Cold Rolled Steel, Zinc Plated
National Hardware V284 Flush/Full Inset Light T Hinge National Hardware N146-290 Flush/Full Inset Square Corner Narrow Hinge Palram 92770 Horizontal Closure Strip
T HINGES 2IN ZN PLT
Our Price: $5.33
National Hardware Light T Hinge, Flush/Full Inset, Series: V284, 6 Holes, 0.2 in Hole Diameter, 0.048 in Leaf Thickness, 2 in Door Leaf Length, 0.54 in Frame Leaf Length, 1.81 in Frame Leaf Width, 0.119 in Diameter Pin, Aluminum Pin, Wall Mounting, Fasteners: NO 6 Flat Head Screw, 18 lb Load Capacity, 1.91 in Overall Width, Hot Rolled Steel National Hardware Narrow Hinge, Flush/Full Inset, Square Corner, Series: V518, 6 Holes, 1/4 in Hole Diameter, 0.06 in Leaf Thickness, 2-1/2 in Door Leaf Length, 2-1/2 in Frame Leaf Length, Non-Removable Pin, 0.12 in Diameter Pin, Steel Pin, Wall Mounting, Fasteners: Screws, 20 lb Load Capacity, 2-1/2 in Overall Width, Cold Rolled Steel, Brass Used under Suntuf panels on each cross support or purlin. Provides support for fasteners when attaching panels to framing. Custom profile matches pitch and depth of panel corrugation.
Palram 92771 Horizontal Closure Strip HASP SAFETY GALV 3-1/2IN      National Hardware N141-879 Narrow Hinge
NARROW HINGES 2IN BRS
Our Price: $5.51
Used under Palruf or Suntop panels on each cross support or purlin. Provides support for fasteners when attaching panels to framing. Custom profile matches pitch and depth of panel corrugation. Non- swiveling. Adds security for doors, cabinets and gates. Rust resistant. National Hardware Narrow Hinge, Full Mortise, Series: V508, Knuckle Bearing, 4 Holes, 0.23 in Hole Diameter, 0.06 in Leaf Thickness, 2 in Door Leaf Length, 2 in Frame Leaf Length, Removable Pin, 0.12 in Diameter Pin, Wall Mounting, Fasteners: (5) Knuckle, Screws, 10 lb Load Capacity, 1.56 in Overall Width, Cold Rolled Steel, Brass
National Hardware 286BC Extra Heavy Flush/Full Inset T Hinge HASP SAFETY GALV 4-1/2IN      HINGE UTL STL GALV 3X3IN
T HINGES 6IN ZN PLT
Our Price: $5.61
National Hardware T Hinge, Extra Heavy, Flush/Full Inset, Series: 286BC, 0.095 in Leaf Thickness, 6 in Door Leaf Length, 2.15 in Door Leaf Width, 4-1/4 in Frame Leaf Length, 1.83 in Frame Leaf Width, 0.326 in Diameter Pin, Wall Mounting, Fasteners: NO 12 Flat Head Screw, 83 lb Load Capacity, Hot Rolled Steel, Zinc Plated, BHMA A138.18 Non- swiveling. Adds security for doors, cabinets and gates. Rust resistant. Five knuckle full mortise design. Allows easy installation or removal of lightweight doors. Screws included.
HINGE BRD ZINC PLATED 3-1/2IN National Hardware V284 Flush/Full Inset Light T Hinge National Hardware 286BC Extra Heavy Flush/Full Inset T Hinge
T HINGES 3IN ZN PLT
Our Price: $5.74
T HINGES 5IN ZN PLT
Our Price: $5.74
504. Swaged for mortise installations. Manufactured with cold rolled steel. Five knuckle, full mortise design. Loose pin allows doors to be removed without removing hinge. Boxed loose barcoded. National Hardware Light T Hinge, Flush/Full Inset, Series: V284, 6 Holes, 0.21 in Hole Diameter, 0.056 in Leaf Thickness, 3 in Door Leaf Length, 0.69 in Frame Leaf Length, 2.24 in Frame Leaf Width, 0.17 in Diameter Pin, Aluminum Pin, Wall Mounting, Fasteners: NO 6 Flat Head Screw, 18 lb Load Capacity, 2.34 in Overall Width, Hot Rolled Steel National Hardware T Hinge, Extra Heavy, Flush/Full Inset, Series: 286BC, 0.28 in Hole Diameter, 0.09 in Leaf Thickness, 5 in Door Leaf Length, 1.91 in Door Leaf Width, 3-3/4 in Frame Leaf Length, 1.6 in Frame Leaf Width, 0.272 in Diameter Pin, Wall Mounting, Fasteners: NO 9 Flat Head Screw, 70 lb Load Capacity, Hot Rolled Steel, Zinc Plated
Stanley 131102 Hinge Strap National Hardware 505BC Flush/Full Inset Broad Hinge Woodtite 92523 Self Drilling Screw 2 in
Designed for new installations with Stanley's 130708, 130559, 130583, and 130617 hooks. Strap punched for 5/16" (6" and 8" sizes) or 3/8" (10", 12", 14", 16" 18", 20" and 24" sizes) bolts. National Hardware Broad Hinge, Flush/Full Inset, Series: 505BC, 6 Holes, 0.23 in Hole Diameter, 0.11 in Leaf Thickness, 3-1/2 in Door Leaf Length, 3-1/2 in Frame Leaf Length, Riveted, Non-Removable Pin, 0.27 in Diameter Pin, Wall Mounting, 70 lb Load Capacity, 3.62 in Overall Length, 3-1/2 in Overall Width, Cold Rolled Steel, Zinc Plated Woodtite 1" screw (sku 940.4302) with EPDM washer is used to fasten PVC, Sun-n-Rain and Palruf or Polycarbonate, Suntop and Suntuf, corrugated panels in a siding or cladding application and Woodtite 2" screw (sku 171.0235) also with EPDM washer is used to crown fasten PVC, Sun-n-Rain and Palruf or Polycarbonate, Suntop and Suntuf, corrugated panels in a roofing application.
HINGE UTILITY STL 3-1/2X3-1/2 HASP SAFETY 3-1/2IN ZINC STL  Stanley 130559 Full Threaded Bolt Hook
Five knuckle full mortise design. Allows easy installation or removal of lightweight doors. Screws included. Latches without a padlock. All screws are  concealed when locked for added security. Adjust to correct gate sag. Includes 2 washers and 2 nuts per hook. Full threaded hook is bolted through the post and firmly secured with standard size nuts and washers on each side. As a replacement part: use with National's 292 Bold Hook. For new installations: use with National's #294 Hinge Straps. Use with the Stanley/National Strap size 14"(N130-799), 16"(N168-336), and the 18"(N248-039).
HASP SAFETY 4-1/2IN ZINC STL  National Hardware N141-960 Narrow Hinge Mintcraft LR095 Screw Hook
Latches without a padlock. All screws are  concealed when locked for added security. National Hardware Narrow Hinge, Full Mortise, Series: V508, Knuckle Bearing, 6 Holes, 0.23 in Hole Diameter, 0.06 in Leaf Thickness, 2-1/2 in Door Leaf Length, 2-1/2 in Frame Leaf Length, Removable Pin, 0.12 in Diameter Pin, Wall Mounting, Fasteners: (5) Knuckle, Screws, 20 lb Load Capacity, 1.68 in Overall Width, Cold Rolled Steel, Brass Easily installs into wood surfaces. Replaces worn or broken bolt hooks. Can be used with strap hinges.
HASP SAFETY HINGE DBL 3-1/2 IN National Hardware V284 Flush/Full Inset Light T Hinge National Hardware N142-034 Narrow Hinge
T HINGES 4IN ZN PLT
Our Price: $6.16
Use to secure chests, cabinets, lockers and door corners. Rust resistant. National Hardware Light T Hinge, Flush/Full Inset, Series: V284, 6 Holes, 0.23 in Hole Diameter, 0.056 in Leaf Thickness, 4 in Door Leaf Length, 3/4 in Frame Leaf Length, 2.44 in Frame Leaf Width, 0.195 in Diameter Pin, Aluminum Pin, Wall Mounting, Fasteners: NO 7 Flat Head Screw, 2.54 in Overall Width, Hot Rolled Steel, Zinc Plated, BHMA A138.18 National Hardware Narrow Hinge, Full Mortise, Series: V508, Knuckle Bearing, 6 Holes, 1/4 in Hole Diameter, 0.07 in Leaf Thickness, 3 in Door Leaf Length, 3 in Frame Leaf Length, Removable Pin, 0.16 in Diameter Pin, Wall Mounting, Fasteners: (5) Knuckle, Screws, 28 lb Load Capacity, 2.06 in Overall Width, Cold Rolled Steel, Zinc Plated
National Hardware N146-399 Flush/Full Inset Square Corner Narrow Hinge Stanley 139998 Door Hinge HINGE BRD PLN STL 4IN
NARROW HINGES 3IN BRS
Our Price: $6.20
National Hardware Narrow Hinge, Flush/Full Inset, Square Corner, Series: V518, 6 Holes, 1/4 in Hole Diameter, 0.07 in Leaf Thickness, 3 in Door Leaf Length, 3 in Frame Leaf Length, Non-Removable Pin, 0.16 in Diameter Pin, Steel Pin, Wall Mounting, Fasteners: Screws, 28 lb Load Capacity, 3 in Overall Width, Cold Rolled Steel, Brass 504. Designed for general utility and industrial applications. Hinges are swaged for mortise installations. Loose pin allows doors to be removed without taking off hinges. Plain steel version can be welded. Boxed. 505. Swaged for mortise installations. Manufactured with cold rolled steel. Five knuckle, full mortise design. Riveted, non-removable pin. Boxed loose barcoded.
HINGE UTL SQ CNR ZN PLT 3X2IN National Hardware 505BC Flush/Full Inset Broad Hinge HASP SAFETY ZINC PLT FN 6IN
BROAD HINGES 4IN ZN PLT
Our Price: $6.46
Five knuckle full mortise design. Allows easy installation or removal of lightweight cabinet doors. Screws included. National Hardware Broad Hinge, Flush/Full Inset, Series: 505BC, 8 Holes, 0.29 in Hole Diameter, 0.11 in Leaf Thickness, 4 in Door Leaf Length, 4 in Frame Leaf Length, Riveted, Non-Removable Pin, 0.27 in Diameter Pin, Wall Mounting, 70 lb Load Capacity, 4.14 in Overall Length, 4 in Overall Width, Cold Rolled Steel, Zinc Plated, BHMA A138.18 Non- swiveling. Adds security for doors, cabinets and gates. Rust resistant.
HINGE BRD ZINC PLATED 4IN     Palram 94361 Horizontal Closure Strip Palram 92772 Vertical Closure Strip
BROAD HINGES 4IN ZN PLT
Our Price: $6.49
504. Swaged for mortise installations. Manufactured with cold rolled steel. Five knuckle, full mortise design. Loose pin allows doors to be removed without removing hinge. Boxed loose barcoded. Used under Sun-n-Rain panels on each cross support or purlin. Provides support for fasteners when attaching panels to framing. Custom profile matches pitch and depth of panel corrugation. Use under Palram's corrugated panels to close off vertical edges for a finished look.
National Hardware N142-067 Narrow Hinge National Hardware V30 Corrosion Resistant Safety Hasp T-HINGE LD STEEL 6IN ZINC PLTD
NARROW HINGES 3IN BRS
Our Price: $6.53
National Hardware Narrow Hinge, Full Mortise, Series: V508, Knuckle Bearing, 6 Holes, 1/4 in Hole Diameter, 0.07 in Leaf Thickness, 3 in Door Leaf Length, 3 in Frame Leaf Length, Removable Pin, 0.16 in Diameter Pin, Wall Mounting, Fasteners: (5) Knuckle, Screws, 28 lb Load Capacity, 2.06 in Overall Width, Cold Rolled Steel, Brass National Hardware Safety Hasp, Corrosion Resistant, Series: V30, 0.44 in Diameter Shackle, 5.68 in Length, 1-1/2 in Height, Hot Rolled Steel, Black, Includes: Rigid Non-Swivel Staple, For Doors, Cabinets, Boxes and Trunks For use on tool boxes, storage chests and small shed doors.
Mintcraft LR085 Bolt Hook HASP SAFETY 6IN SWVL ZINC STL National Hardware N348-979 Decorative Narrow Narrow Hinge
Can be used with gate strap hinges to support wooden gates and fences. Can be easily adjusted. Latches without a padlock. All screws are  concealed when locked for added security. National Hardware Narrow Hinge, Decorative, Narrow, Series: V519, 4 Holes, Non-Removable Pin, 7 lb Load Capacity, 1-1/2 in Overall Width, Stainless Steel, Stainless Steel, BHMA A138.18, For Lightweight Doors, Chests and Cabinets
National Hardware V30 Non-Swivel Safety Hasp National Hardware V32 Swivel Staple Safety Hasp National Hardware V34 Double Hinge Safety Hasp
SAFETY HASPS 6IN ZN PLT
Our Price: $7.07
National Hardware Safety Hasp, Non-Swivel, Series: V30, 0.44 in Diameter X 0.9 in Height Shackle, 8.68 in Length, 1-3/4 in Height, Hot Rolled Steel, Zinc Plated, Includes: Rigid Non-Swivel Staple, BHMA A138.18 Certified, 6 in, For Securing a Wide Variety of Doors, Cabinets, Boxes and Trunks National Hardware Safety Hasp, Swivel Staple, Series: V32, 0.41 in Diameter X 1.2 in Height Shackle, 4.48 in Length, 1-1/2 in Height, Hot Rolled Steel, Aluminum Pin, Zinc Plated, BHMA A138.18 Certified, 3-1/4 in, For Securing a Wide Variety of Doors, Cabinets, Boxes and Trunks National Hardware Safety Hasp, Double Hinge, Series: V34, 6-1/4 in Length, 1-1/2 in Height, Cold Rolled Steel, Aluminum Pin, Zinc Plated, Includes: Rigid Non-Swivel Staple, BHMA A138.18 Certified, 3-1/4 in, For Around the Corner Applications on Lockers, Chests, Tool Boxes and Doors
HINGE UTL GALV 3-1/2X3-1/2IN  National Hardware V504 Broad Hinge Stanley 130179 Screw Hook
BROAD HINGES 4IN ZN PLT
Our Price: $7.36
Five knuckle full mortise design. Allows easy installation or removal of lightweight doors. Screws included. National Hardware Broad Hinge, Full Mortise, Series: V504, Knuckle Bearing, 8 Holes, 0.29 in Hole Diameter, 0.11 in Leaf Thickness, 4 in Door Leaf Length, 4 in Frame Leaf Length, Removable Pin, 0.27 in Diameter Pin, Brass Pin, Wall Mounting, Fasteners: (5) Knuckle, Screws, 70 lb Load Capacity, 4 in Overall Width, Cold Rolled Steel, Zinc Plated For use with new installations with Stanley's 130732, 131102, 248047, 131060, 130765, and 130799 hinge straps. Adjusts to correct gate sag.
HINGE UTILITY STEEL 4X4IN ZN  HOOK SCREW/HINGE STRAP 6IN    T-HINGE STL FXPIN LD 4 IN GALV
Five knuckle full mortise design. Allows easy installation or removal of lightweight doors. Screws included. Replaces worn or broken bolt hooks.  Can be used with strap hinges Used for interior or exterior applications. Rust-resistant.
HASP SAFETY HINGE DBL 4-1/2IN National Hardware V32 Swivel Staple Safety Hasp Stanley 131375 Pintle
Use to secure chests, cabinets, lockers and door corners. Rust resistant. National Hardware Safety Hasp, Swivel Staple, Series: V32, 0.41 in Diameter X 1.2 in Height Shackle, 5.61 in Length, 1-1/2 in Height, Hot Rolled Steel, Aluminum Pin, Zinc Plated, BHMA A138.18 Certified, 4-1/2 in, For Securing a Wide Variety of Doors, Cabinets, Boxes and Trunks Designed for use with Stanley's 130732, 131102, 248047, 131060, 248039, 130765, 168336, and 130799 hinge straps. Gate can be easily lifted off of pintle. Designed for heavy-duty gates and doors. Pintle punched for 5/16" (1/2" size) or 3/8" (5/8" size) bolts.
HASP SAFETY GALV 2-1/2IN      HOOK SCREW/HINGE STRAP 8IN    National Hardware 286BC Extra Heavy Flush/Full Inset T Hinge
T HINGES 8IN ZN PLT
Our Price: $7.98
Designed to secure a wide variety of doors, cabinets, boxes, trunks, etc. For security, all screws are concealed when hasp is closed. Ribbed design for extra strength. Includes rigid non-swivel staple. Visual-pack. Replaces worn or broken bolt hooks.  Can be used with strap hinges National Hardware T Hinge, Extra Heavy, Flush/Full Inset, Series: 286BC, 0.105 in Leaf Thickness, 8 in Door Leaf Length, 2.73 in Door Leaf Width, 5-1/2 in Frame Leaf Length, 2.3 in Frame Leaf Width, 0.388 in Diameter Pin, Wall Mounting, Fasteners: NO 12 Flat Head Screw, Hot Rolled Steel, Zinc Plated, BHMA A138.18, For Residential Applications
National Hardware N348-987 Decorative Narrow Narrow Hinge Stanley 130732 Hinge Strap HASP SAFETY GLV 4-1/2INX1-1/2
NARROW HINGES 2IN SS
Our Price: $8.00
National Hardware Narrow Hinge, Decorative, Narrow, Series: V519, 4 Holes, Non-Removable Pin, 10 lb Load Capacity, 2 in Overall Width, Stainless Steel, Stainless Steel, BHMA A138.18, For Lightweight Doors, Chests and Cabinets Designed for new installations with Stanley's 130708, 130559, 130583, and 130617 hooks. Strap punched for 5/16" (6" and 8" sizes) or 3/8" (10", 12", 14", 16" 18", 20" and 24" sizes) bolts. For both indoor and outdoor use. Rust resistant.
T-HINGE STL FIXPIN HD 4IN BLK National Hardware V284 Flush/Full Inset Light T Hinge National Hardware V30 Non-Swivel Safety Hasp
T HINGES 5IN ZN PLT
Our Price: $8.12
National Hardware Light T Hinge, Flush/Full Inset, Series: V284, 6 Holes, 0.27 in Hole Diameter, 0.071 in Leaf Thickness, 5 in Door Leaf Length, 0.89 in Frame Leaf Length, 2.88 in Frame Leaf Width, 0.19 in Diameter Pin, Aluminum Pin, Wall Mounting, Fasteners: NO 9 Flat Head Screw, 8 lb Load Capacity, 2.98 in Overall Width, Hot Rolled Steel National Hardware Safety Hasp, Non-Swivel, Series: V30, 0.44 in Diameter X 0.9 in Height Shackle, 4.56 in Length, 1-1/2 in Height, Hot Rolled Steel, Stainless Steel Pin, Galvanized, Includes: Rigid Non-Swivel Staple, BHMA A138.18 Certified, 3-1/4 in, For Securing a Wide Variety of Doors, Cabinets, Boxes and Trunks
National Hardware V32 Corrosion Resistant Swivel Staple Safety Hasp National Hardware V30 Non-Swivel Safety Hasp National Hardware V37 Weather Resistant Safety Hasp
SAFETY HASPS 3-1/4IN SS
Our Price: $8.41
National Hardware Swivel Staple Safety Hasp, Corrosion Resistant, Series: V32, 0.41 in Diameter Shackle, 4.48 in Length, 1-1/2 in Height, Hot Rolled Steel, Black, Includes: Fasteners, For Doors, Cabinets, Boxes and Trunks National Hardware Safety Hasp, Non-Swivel, Series: V30, 0.44 in Diameter X 0.9 in Height Shackle, 5.68 in Length, 1-1/2 in Height, Hot Rolled Steel, Stainless Steel Pin, Galvanized, Includes: Rigid Non-Swivel Staple, BHMA A138.18 Certified, 4-1/2 in, For Securing a Wide Variety of Doors, Cabinets, Boxes and Trunks National Hardware Safety Hasp, Weather Resistant, Series: V37, 9/32 in Diameter Shackle, 3-1/4 in Length, Stainless Steel, BHMA A138.18 Certified, For Boxes, Chests and Cabinets
Stanley 130617 Full Threaded Bolt Hook Stanley N129-338 Extra T-Hinge National Hardware V32 Corrosion Resistant Swivel Staple Safety Hasp
T HINGES 4IN GALV
Our Price: $8.44
Adjust to correct gate sag. Includes 2 washers and 2 nuts per hook. Full threaded hook is bolted through the post and firmly secured with standard size nuts and washers on each side. As a replacement part: use with National's 292 Bold Hook. For new installations: use with National's #294 Hinge Straps. Use with the Stanley/National Strap size 14"(N130-799), 16"(N168-336), and the 18"(N248-039). Offset screw holes for extra strength and to prevent wood from splitting. Tight pin for left or right hand applications. Manufactured with hot-rolled steel. National Hardware Swivel Staple Safety Hasp, Corrosion Resistant, Series: V32, 0.41 in Diameter Shackle, 5.61 in Length, 1-1/2 in Height, Hot Rolled Steel, Black, Includes: Fasteners, For Doors, Cabinets, Boxes and Trunks
HINGE UTL SQ CNR ZN STL 5X5IN National Hardware N195-644 Broad Hinge National Hardware V34 Double Hinge Safety Hasp
Five knuckle full mortise design. Allows easy installation or removal of lightweight doors. Screws included. National Hardware Broad Hinge, Full Mortise, Series: V504, Knuckle Bearing, 6 Holes, 0.077 in Leaf Thickness, 2-1/2 in Door Leaf Length, 2-1/2 in Frame Leaf Length, Removable Pin, Brass Pin, Wall Mounting, Fasteners: (5) Knuckle, Screws, 43 lb Load Capacity, 2-1/2 in Overall Width, Cold Rolled Steel, Zinc Plated, BHMA A138.18 National Hardware Safety Hasp, Double Hinge, Series: V34, 8.19 in Length, 1-1/2 in Height, Cold Rolled Steel, Aluminum Pin, Zinc Plated, Includes: Rigid Non-Swivel Staple, BHMA A138.18 Certified, 4-1/2 in, For Around the Corner Applications on Lockers, Chests, Tool Boxes and Doors
Palram 92520 Horizontal Closure Strip T-HINGE ZINC PLATED 4IN       Midwest Products 17  Basswood
T HINGES 4IN ZN PLT
Our Price: $8.66
Used under Suntuf panels on each cross support or purlin. Provides support for fasteners when attaching panels to framing. Custom profile matches pitch and depth of panel corrugation. Offset screw holes for extra strength and to prevent wood from splitting. Tight pin for left or right hand applications. Visual-pack. Basswood is perfect for almost any project that requires wood and can be painted or stained to represent any wood type. Bag contains 72 cubic inches.
Stanley 130765 Hinge Strap Stanley 131409 Pintle National Hardware V284 Flush/Full Inset Light T Hinge
T HINGES 6IN ZN PLT
Our Price: $8.86
Designed for new installations with Stanley's 130708, 130559, 130583, and 130617 hooks. Strap punched for 5/16" (6" and 8" sizes) or 3/8" (10", 12", 14", 16" 18", 20" and 24" sizes) bolts. Designed for use with Stanley's 130732, 131102, 248047, 131060, 248039, 130765, 168336, and 130799 hinge straps. Gate can be easily lifted off of pintle. Designed for heavy-duty gates and doors. Pintle punched for 5/16" (1/2" size) or 3/8" (5/8" size) bolts. National Hardware Light T Hinge, Flush/Full Inset, Series: V284, 6 Holes, 0.27 in Hole Diameter, 0.072 in Leaf Thickness, 6 in Door Leaf Length, 0.89 in Frame Leaf Length, 3.16 in Frame Leaf Width, 0.195 in Diameter Pin, Aluminum Pin, Wall Mounting, Fasteners: NO 9 Flat Head Screw, 13 lb Load Capacity, 3.26 in Overall Width, Hot Rolled Steel
HINGE UTILITY 4-1/2INX4-1/2IN Metalite 92525 Self Drilling Screw 2 in Mintcraft LR096 Screw Hook
Five knuckle full mortise design. Allows easy installation or removal of lightweight doors. Screws included. Self-drilling tapping screws for fastening polycarbonate and PVC directly to aluminum and steel supporting members. Hex-head with weatherseal washer. Easily installs into wood surfaces. Replaces worn or broken bolt hooks. Can be used with strap hinges.
T-HINGE GALV 3IN              Midwest Products 19  Balsa Wood National Hardware V32 Swivel Staple Safety Hasp
T HINGES 3IN GALV
Our Price: $9.14
SAFETY HASPS 6IN ZN PLT
Our Price: $9.18
Offset screw holes for extra strength and to prevent wood from splitting. Tight pin for left or right hand applications. Steel with aluminum pin. Safe working load: 18 lbs. Visual-pack. Balsa is the premier wood for modeling and is also suited to almost any craft, art or school project; easy to cut and can be stained or painted to represent any wood type. Bag contains 72 cubic inches. National Hardware Safety Hasp, Swivel Staple, Series: V32, 0.41 in Diameter X 1.2 in Height Shackle, 8.62 in Length, 1-3/4 in Height, Hot Rolled Steel, Aluminum Pin, Zinc Plated, BHMA A138.18 Certified, 6 in, For Securing a Wide Variety of Doors, Cabinets, Boxes and Trunks
Mintcraft LR084 Bolt Hook Master Lock 720DPF Single Hinge Latching Hasp T-HINGE GALV 5IN
T HINGES 5IN GALV
Our Price: $9.44
Can be used with gate strap hinges to support wooden gates and fences. Can be easily adjusted. Designed to fit most corners and angles to secure hard-to-lock properly. Recommended for use with Master Lock medium and high security padlocks. Heavy gauge hardened steel protects against cutting and sawing. Hardened Boron alloy staple withstands up to 8 tons of cutting force. Rolled edges protect against prying and conceal mounting screws. Hinge pins are hidden and are virtually impossible to remove. Accepts shackle diameters up to 7/16". National Hardware T-Hinge, Series: V286, Extra Heavy Duty, Tight Pin, 70 lb Load Capacity, 5 in Overall Length, Hot Rolled Steel, Galvanized, Standards: BHMA A138.18
HASP SAFETY ZN STL 6X1-3/4IN  Fasade 928-29 Inside Corner Trim Fasade 923-29 Edge J-Trim
Screws are concealed when hasp is locked. Rust resistant. Zinc plated. Adjustable staple. Used to create inside corner return for you Fascade backsplash project. Dimensions: 18" Length. Used to provide a professionally finished edge for your backsplash project. 18" length.
Fasade 92318 Edge J-Trim Fasade 92817 Inside Corner Trim Fasade 92818 Inside Corner Trim
Used to provide a professionally finished edge for your Fascade backsplash project. Dimensions: 18" Length. Used to create inside corner return for you Fascade backsplash project. Dimensions: 18" Length. Used to create inside corner return for you Fascade backsplash project. Dimensions: 18" Length.
Fasade 92319 Edge J-Trim Fasade 92317 Edge J-Trim Fasade 92826 Inside Corner Trim
Used to provide a professionally finished edge for your Fascade backsplash project. Dimensions: 18" Length. Used to provide a professionally finished edge for your Fascade backsplash project. Dimensions: 18" Length. Used to create inside corner return for you Fascade backsplash project. Dimensions: 18" Length.
Fasade 92326 Edge J-Trim Fasade 92819 Inside Corner Trim Fasade 92321 Edge J-Trim
Used to provide a professionally finished edge for your Fascade backsplash project. Dimensions: 18" Length. Used to create inside corner return for you Fascade backsplash project. Dimensions: 18" Length. Used to provide a professionally finished edge for your Fascade backsplash project. Dimensions: 18" Length.
Fasade 92821 Inside Corner Trim T-HINGE FXPIN H-DUTY 4IN GALV National Hardware N195-651 Broad Hinge
BROAD HINGES 3IN ZN PLT
Our Price: $9.68
Used to create inside corner return for you Fascade backsplash project. Dimensions: 18" Length. National Hardware Broad Hinge, Full Mortise, Series: V504, Knuckle Bearing, 6 Holes, 0.08 in Leaf Thickness, 3 in Door Leaf Length, 3 in Frame Leaf Length, Removable Pin, Brass Pin, Wall Mounting, Fasteners: (5) Knuckle, Screws, 50 lb Load Capacity, 3 in Overall Width, Cold Rolled Steel, Zinc Plated, BHMA A138.18, For Residential Applications
Stanley 130799 Hinge Strap Stanley 130203 Screw Hook Stanley 130583 Full Threaded Bolt Hook
Designed for new installations with Stanley's 130708, 130559, 130583, and 130617 hooks. Strap punched for 5/16" (6" and 8" sizes) or 3/8" (10", 12", 14", 16" 18", 20" and 24" sizes) bolts. For use with new installations with Stanley's 130732, 131102, 248047, 131060, 130765, and 130799 hinge straps. Adjusts to correct gate sag. Adjust to correct gate sag. Includes 2 washers and 2 nuts per hook. Full threaded hook is bolted through the post and firmly secured with standard size nuts and washers on each side. As a replacement part: use with National's 292 Bold Hook. For new installations: use with National's #294 Hinge Straps. Use with the Stanley/National Strap size 14"(N130-799), 16"(N168-336), and the 18"(N248-039).
HASP SAFETY GALV STL 6 INCH   Mintcraft LR086 Bolt Hook T-HINGE GALV 4IN
T HINGES 4IN GALV
Our Price: $10.02
Non- swiveling. Adds security for doors, cabinets and gates. Rust resistant. Can be used with gate strap hinges to support wooden gates and fences. Can be easily adjusted. Offset screw holes for extra strength and to prevent wood from splitting. Tight pin for left or right hand applications. Steel with aluminum pin. Safe working load: 18 lbs. Visual-pack.
T-HINGE STL FXPIN LD 6 IN GALV National Hardware V37 Weather Resistant Safety Hasp National Hardware V519 Decorative Narrow Narrow Hinge
SAFETY HASPS 4-1/2IN SS
Our Price: $10.10
NARROW HINGES 3IN SS
Our Price: $10.16
Used for interior or exterior applications. Rust-resistant. National Hardware Safety Hasp, Weather Resistant, Series: V37, 9/32 in Diameter Shackle, 4-1/2 in Length, Stainless Steel, BHMA A138.18 Certified, For Boxes, Chests and Cabinets National Hardware Narrow Hinge, Decorative, Narrow, Series: V519, 6 Holes, Non-Removable Pin, 28 lb Load Capacity, 3 in Overall Width, Stainless Steel, Stainless Steel, BHMA A138.18, For Lightweight Doors, Chests and Cabinets
National Hardware V285 Extra Heavy Flush/Full Inset T Hinge Midwest Products 5324  Craft Plywood HASP SAFETY GALV 3-1/4IN
SAFETY HASPS 3-1/4IN GALV
Our Price: $10.32
National Hardware T Hinge, Extra Heavy, Flush/Full Inset, Series: V285, 6 Holes, 4 in Door Leaf Length, Fixed Pin, Wall Mounting, Stainless Steel, Stainless Steel, BHMA A138.18, For Commercial/Industrial and Residential Applications Perfect for painting, staining, stenciling and wood burning; cuts easily with a saw and is suitable for both indoor and outdoor (must be sealed) use. Made with high quality birch veneer. Stanley Swivel Staple Safety Hasp, Series: V32, 1 Locking Holes, 3-1/4 in Length, 1-1/2 in Width, Steel, Galvanized, For Securing a Wide Variety of Doors, Cabinets, Boxes and Trunks
National Hardware V30 Non-Swivel Safety Hasp HOOK SCREW/HINGE STRAP 10IN   National Hardware V286 Extra Heavy Flush/Full Inset T Hinge
SAFETY HASPS 6IN GALV
Our Price: $10.32
T HINGES 4IN BLK
Our Price: $10.68
National Hardware Safety Hasp, Non-Swivel, Series: V30, 8.68 in Length, 1-3/4 in Height, Hot Rolled Steel, Galvanized, Includes: Rigid Non-Swivel Staple, BHMA A138.18 Certified, 6 in, For Securing a Wide Variety of Doors, Cabinets, Boxes and Trunks Replaces worn or broken bolt hooks.  Can be used with strap hinges National Hardware T Hinge, Extra Heavy, Flush/Full Inset, Series: V286, 6 Holes, 0.076 in Leaf Thickness, 4 in Door Leaf Length, 1.55 in Door Leaf Width, 1.32 in Frame Leaf Length, 3.3 in Frame Leaf Width, 0.222 in Diameter Pin, Wall Mounting, Fasteners: NO 9 Flat Head Screw, Hot Rolled Steel, Black, BHMA A138.18, For Residential Applications
National Hardware V32 Swivel Staple Safety Hasp National Hardware N195-669 Broad Hinge Midwest Products 5334  Craft Plywood
SAFETY HASPS 4-1/2IN GALV
Our Price: $10.68
National Hardware Safety Hasp, Swivel Staple, Series: V32, 0.41 in Diameter X 1.2 in Height Shackle, 5.61 in Length, 1-1/2 in Height, Hot Rolled Steel, Brass Pin, Galvanized, BHMA A138.18 Certified, 4-1/2 in, For Securing a Wide Variety of Doors, Cabinets, Boxes and Trunks National Hardware Broad Hinge, Full Mortise, Series: V504, Knuckle Bearing, 6 Holes, 0.23 in Hole Diameter, 0.11 in Leaf Thickness, 3-1/2 in Door Leaf Length, 3-1/2 in Frame Leaf Length, Removable Pin, 0.27 in Diameter Pin, Brass Pin, Wall Mounting, Fasteners: (5) Knuckle, Screws, 70 lb Load Capacity, 3-1/2 in Overall Width, Cold Rolled Steel Perfect for painting, staining, stenciling and wood burning; cuts easily with a saw and is suitable for both indoor and outdoor (must be sealed) use. Made with high quality birch veneer.
Midwest Products 5304  Craft Plywood HINGE BRD PLN STL 4-1/2IN     National Hardware V514 Square Corner Door Hinge
DOOR HINGES 1-1/2IN SS
Our Price: $11.21
Perfect for painting, staining, stenciling and wood burning; cuts easily with a saw and is suitable for both indoor and outdoor (must be sealed) use. Made with high quality birch veneer. National Hardware Broad Hinge, Series: 504BC, Full Mortise, 8 Holes, 0.34 in Hole Diameter, 0.13 in Leaf Thickness, Removable, Loose Pin, 0.27 in Dia Pin, Fasteners: 5-Knuckle, 90 lb Load Capacity, 4-1/2 in Overall Length, 4-1/2 in Overall Width, Cold Rolled Steel, Plain National Hardware Door Hinge, Full Mortise, Square Corner, Series: V514, Knuckle Bearing, 4 Holes, 1-1/2 in Door Leaf Length, 1-1/2 in Frame Leaf Length, Non-Rising, Removable Pin, Wall Mounting, Fasteners: (5) Knuckles, NO 9 Flat Head Screws, 10 lb Load Capacity, 1-1/2 in Overall Width, Stainless Steel, Stainless Steel, BHMA A138.18
National Hardware 286BC Extra Heavy Flush/Full Inset T Hinge Mintcraft LTH-Z02-013L Light Duty T-Hinge American Lock A885D Double Hinge Locking Hasp
T HINGES 10IN ZN PLT
Our Price: $11.38
National Hardware T Hinge, Extra Heavy, Flush/Full Inset, Series: 286BC, 0.36 in Hole Diameter, 0.14 in Leaf Thickness, 10 in Door Leaf Length, 7.2 in Frame Leaf Length, 2-1/4 in Frame Leaf Width, 0.44 in Diameter Pin, Wall Mounting, 48 lb Load Capacity, 12-1/4 in Overall Length, Hot Rolled Steel, Zinc Plated, BHMA A138.18 Used for interior or exterior applications. Rust-resistant. Zinc plated. Resists cutting, sawing, and hammering. Ideal for corners and angles. Mounting hardware included. Accepts shackle diameter up to 7/16".
Master Lock 706D High Security Hasp Stanley N129-445 Extra T-Hinge Stanley 130641 Full Threaded Bolt Hook
T HINGES 6IN GALV
Our Price: $11.64
High security pinless hinge. Offset screw holes for extra strength and to prevent wood from splitting. Tight pin for left or right hand applications. Manufactured with hot-rolled steel. Adjust to correct gate sag. Includes 2 washers and 2 nuts per hook. Full threaded hook is bolted through the post and firmly secured with standard size nuts and washers on each side. As a replacement part: use with National's 292 Bold Hook. For new installations: use with National's #294 Hinge Straps. Use with the Stanley/National Strap size 14"(N130-799), 16"(N168-336), and the 18"(N248-039).
National Hardware V514 Square Corner Door Hinge HOOK SCREW/HINGE STRAP 12IN   Master Lock 730DPF Straight Bar Safety Hasp
DOOR HINGES 2IN SS
Our Price: $11.74
National Hardware Door Hinge, Full Mortise, Square Corner, Series: V514, Knuckle Bearing, 4 Holes, 0.21 in Hole Diameter, 0.08 in Leaf Thickness, 2 in Door Leaf Length, 2 in Frame Leaf Length, Non-Rising, Removable Pin, 0.19 in Diameter Pin, Wall Mounting, Fasteners: (5) Knuckles, NO 9 Flat Head Screws, 15 lb Load Capacity, 2 in Overall Width Replaces worn or broken bolt hooks.  Can be used with strap hinges Zinc plated hardened steel for added strength and weatherability. Hardened steel staple resists cutting, sawing and hammering. Hasp body conceals mounting hardware. Use for securing utility vans, trailers, gang boxes, and vending machines.  Accepts shackle diameter up to 7/16".
Palram 92593 Wall-Tuf Rivet 3/4 in L National Hardware 505BC Flush/Full Inset Broad Hinge T-HINGE STL FIXPIN HD 6IN BLK
Rivets can be used in conjunction with adhesive when attaching WallTuf panels to a substrate. 50 rivets per bag. National Hardware Broad Hinge, Flush/Full Inset, Series: 505BC, 8 Holes, 4-1/2 in Door Leaf Length, 4-1/2 in Frame Leaf Length, Riveted, Non-Removable Pin, Wall Mounting, 90 lb Load Capacity, 4-1/2 in Overall Width, Cold Rolled Steel, Zin