Home > HARDWARE > CONSTRUCTION HARDWARE > LUMBER / MOLDING/TRIM > EDGE BANDING
Sort By:
1
HINGE NRW ZINC PLATED 1-1/2IN HINGE NRW ZINC PLATED 1IN     HINGE NRW ZINC PLATED 1-1/2IN
518. Swaged for mortise installations. Manufactured from cold-rolled steel, with non-removable steel pin. Tight pin to allow for left or right hand applications. Boxed loose. 518. Swaged for mortise installations. Manufactured from cold-rolled steel, with non-removable steel pin. Tight pin to allow for left or right hand applications. Boxed loose. 518. Swaged for mortise installations. Manufactured from cold-rolled steel, with non-removable steel pin. Tight pin to allow for left or right hand applications. Boxed loose.
HINGE STRAP ZINC PLATED 3IN   HINGE NRW ZINC PLATED 2IN     HINGE NRW ZINC PLATED 2-1/2IN
STRAP HINGES 3IN ZN PLT
Our Price: $2.03
Offset screw holes for extra strength and to prevent wood from splitting. Tight pin for left or right hand applications. Steel with aluminum pin. Safe working load: 18 lbs. Boxed loose. 518. Swaged for mortise installations. Manufactured from cold-rolled steel, with non-removable steel pin. Tight pin to allow for left or right hand applications. Boxed loose. 518. Swaged for mortise installations. Manufactured from cold-rolled steel, with non-removable steel pin. Tight pin to allow for left or right hand applications. Boxed loose.
HINGE UTILITY STEEL 2X2IN ZN  Band-It 25233 Replacement Single Bevel Edge Trimmer Blade HINGE UTL STL ZN PLTD 1INX1IN
Five knuckle full mortise design. Allows easy installation or removal of lightweight doors. Screws included. Single bevel cutting blades used in the "BAND-IT" edge trimmer. Cuts and trims flush, clean, and in both directions. .015" x .75" x 1.75". Carded. Lightweight steel construction. 3 Knuckles.
HINGE UTILITY SQ CNR 2X1-1/2IN American Wood PCOM-144 Common Board HINGE NRW ZINC PLATED 3IN
Lightweight steel construction. 3 Knuckles. American Wood Common Board, 1 in Thickness, 4 in Width, 4 ft Length, Pine 518. Swaged for mortise installations. Manufactured from cold-rolled steel, with non-removable steel pin. Tight pin to allow for left or right hand applications. Boxed loose.
HINGE UTL ZN PLT 1-1/2X1-3/8IN Waddell OBTB32 Out Base Corner Block Waddell IBTB52 Inside Base Corner
Lightweight steel construction. 3 Knuckles. No mitering decorative blocks. Installs with a hammer and finishing nails. Pine wood. No mitering decorative blocks. Installs with a hammer and finishing nails. Pine wood.
Waddell IBTB32 Inside Base Corner Waddell OBTB52 Out Base Corner Block HINGE STRAP STEEL LD 2IN ZINC
No mitering decorative blocks. Installs with a hammer and finishing nails. Pine wood. No mitering decorative blocks. Installs with a hammer and finishing nails. Pine wood. Use in both the interior and exterior. Screws included.
HINGE UTL SQ CNR ZN STL 1X1IN HINGE STRAP ZINC PLATED 5IN   Stanley 139659 Door Hinge
STRAP HINGES 5IN ZN PLT
Our Price: $3.20
Five knuckle full mortise design. Allows easy installation or removal of lightweight cabinet doors. Screws included. Offset screw holes for extra strength and to prevent wood from splitting. Tight pin for left or right hand applications. Steel with aluminum pin. Safe working load: 18 lbs. Boxed loose. 504. Designed for general utility and industrial applications. Hinges are swaged for mortise installations. Loose pin allows doors to be removed without taking off hinges. Plain steel version can be welded. Boxed.
HINGE UTILITY 2-1/2X2-1/2IN ZN HINGE UTL SQ CNR ZN PLT 3X2IN HINGE BRD PLN STL 2IN
Five knuckle full mortise design. Allows easy installation or removal of lightweight doors. Screws included. Lightweight steel construction. 3 Knuckles. 505. Swaged for mortise installations. Manufactured with cold rolled steel. Five knuckle, full mortise design. Riveted, non-removable pin. Boxed loose barcoded.
Walltuf 92586 Inside Corner Molding Wall-Tuff 92588 Cap Molding Walltuf 92587 Outside Corner Molding
Trims out panels and helps achieve a water resistant finished wall. For use with "Walltuf" liner panels. Trims out panels and helps achieve a water resistant finished wall. For use with "Walltuf" liner panels. Trims out panels and helps achieve a water resistant finished wall. For use with "Walltuf" liner panels.
HINGE STRAP ZINC PLATED 6IN   HINGE BRD ZINC PLATED 2IN     HINGE UTL SQ CNR Z 1-1/2X1-3/8
STRAP HINGES 6IN ZN PLT
Our Price: $3.71
BROAD HINGES 2IN ZN PLT
Our Price: $3.77
Offset screw holes for extra strength and to prevent wood from splitting. Tight pin for left or right hand applications. Steel with aluminum pin. Safe working load: 18 lbs. Boxed loose. 504. Swaged for mortise installations. Manufactured with cold rolled steel. Five knuckle, full mortise design. Loose pin allows doors to be removed without removing hinge. Boxed loose barcoded. Five knuckle full mortise design. Allows easy installation or removal of lightweight cabinet doors. Screws included.
American Wood PCLR1X2-6 4-Sided Sanded Common Board HINGE BRD ZINC PLATED 2IN     Stanley 131193 Hinge Screw Eye
BROAD HINGES 2IN ZN PLT
Our Price: $3.88
Sanded on 4 sides. National Hardware Door Hinge, Series: 505BC, Full Mortise, 4 Holes, 0.3125 in Hole Diameter, 0.77 in Leaf Thickness, Non-Removable, Riveted Pin, 0.19 in Dia Pin, Fasteners: 5-Knuckle, 38 lb Load Capacity, 2 in Overall Length, 2 in Overall Width, Cold Rolled Steel, Zinc Plated, Standards: BHMA A138.18 To be used in wood gate applications in conjunction with screw hooks, bolt hooks and pintles.
HINGE UTL SQ CNR ZN 2X1-1/2IN National Hardware N145-920 Flush/Full Inset Square Corner Narrow Hinge Stanley 130112 Screw Hook
Five knuckle full mortise design. Allows easy installation or removal of lightweight cabinet doors. Screws included. National Hardware Narrow Hinge, Flush/Full Inset, Square Corner, Series: V518, 4 Holes, 0.16 in Hole Diameter, 0.05 in Leaf Thickness, 1 in Door Leaf Length, 1 in Frame Leaf Length, Non-Removable Pin, 0.1 in Diameter Pin, Steel Pin, Wall Mounting, Fasteners: Screws, 7 lb Load Capacity, 1 in Overall Width, Cold Rolled Steel, Zinc Plated For use with new installations with Stanley's 130732, 131102, 248047, 131060, 130765, and 130799 hinge straps. Adjusts to correct gate sag.
HINGE UTL GALV 2-1/2X2-1/2IN  Walltuf 92589 Divider Molding Stanley 139733 Weldable Door Hinge
Five knuckle full mortise design. Allows easy installation or removal of lightweight doors. Screws included. Trims out panels and helps achieve a water resistant finished wall. For use with "Walltuf" liner panels. 504. Designed for general utility and industrial applications. Hinges are swaged for mortise installations. Loose pin allows doors to be removed without taking off hinges. Plain steel version can be welded. Boxed.
Waddell RTB35M Rosette Trim Block Waddell RTB35 Beveled Edge Rosette Trim Block Waddell RTB25 Beveled Edge Rosette Trim Block
No mitering decorative blocks. Installs with a hammer and finishing nails. Pine wood. No mitering decorative blocks. Installs with a hammer and finishing nails. Pine wood. No mitering decorative blocks. Installs with a hammer and finishing nails. Pine wood.
National Hardware N146-043 Flush/Full Inset Square Corner Narrow Hinge HINGE STRAP STEEL LD 3IN ZINC National Hardware 282BC Flush/Full Inset Strap Hinge
STRAP HINGES 4IN ZN PLT
Our Price: $4.15
National Hardware Narrow Hinge, Flush/Full Inset, Square Corner, Series: V518, 4 Holes, 0.2 in Hole Diameter, 0.05 in Leaf Thickness, 1-1/2 in Door Leaf Length, 1-1/2 in Frame Leaf Length, Non-Removable Pin, 0.11 in Diameter Pin, Steel Pin, Wall Mounting, Fasteners: Screws, 7 lb Load Capacity, 1-1/2 in Overall Width, Cold Rolled Steel, Zinc Plated Use in both the interior and exterior. Screws included. National Hardware Strap Hinge, Flush/Full Inset, Heavy Duty, Series: 282BC, 0.28 in Hole Diameter, 0.08 in Leaf Thickness, 4 in Door Leaf Length, 1.61 in Door Leaf Width, 4 in Frame Leaf Length, 1.61 in Frame Leaf Width, 0.22 in Diameter Pin, Wall Mounting, 60 lb Load Capacity, 8 in Overall Width, Hot Rolled Steel, Zinc Plated, BHMA A138.18
HINGE BRD ZINC PLATED 2-1/2IN National Hardware N145-946 Flush/Full Inset Square Corner Narrow Hinge Stanley 139808 Door Hinge
NARROW HINGES 1IN BRS
Our Price: $4.27
504. Swaged for mortise installations. Manufactured with cold rolled steel. Five knuckle, full mortise design. Loose pin allows doors to be removed without removing hinge. Boxed loose barcoded. National Hardware Narrow Hinge, Flush/Full Inset, Square Corner, Series: V518, 4 Holes, 0.16 in Hole Diameter, 0.05 in Leaf Thickness, 1 in Door Leaf Length, 1 in Frame Leaf Length, Non-Removable Pin, 0.1 in Diameter Pin, Steel Pin, Wall Mounting, Fasteners: Screws, 7 lb Load Capacity, 1 in Overall Width, Cold Rolled Steel, Brass 504. Designed for general utility and industrial applications. Hinges are swaged for mortise installations. Loose pin allows doors to be removed without taking off hinges. Plain steel version can be welded. Boxed.
National Hardware N141-622 Narrow Hinge HINGE BRD PLN STL 3IN         HINGE BRD ZINC PLATED 2-1/2IN
NARROW HINGES 1IN BRS
Our Price: $4.33
National Hardware Narrow Hinge, Full Mortise, Series: V508, Knuckle Bearing, 4 Holes, 0.16 in Hole Diameter, 0.05 in Leaf Thickness, 1 in Door Leaf Length, 1 in Frame Leaf Length, Removable Pin, 0.1 in Diameter Pin, Wall Mounting, Fasteners: (5) Knuckle, Screws, 7 lb Load Capacity, 1 in Overall Width, Cold Rolled Steel, Brass 505. Swaged for mortise installations. Manufactured with cold rolled steel. Five knuckle, full mortise design. Riveted, non-removable pin. Boxed loose barcoded. National Hardware Door Hinge, Series: 505BC, Full Mortise, 6 Holes, 0.23 in Hole Diameter, 0.09 in Leaf Thickness, Non-Removable, Riveted Pin, 0.21 in Dia Pin, Fasteners: 5-Knuckle, 43 lb Load Capacity, 2-1/2 in Overall Length, 2.61 in Overall Width, Cold Rolled Steel, Zinc Plated, Standards: BHMA A138.18
National Hardware V280 Flush/Full Inset Light Strap Hinge National Hardware 282BC Flush/Full Inset Strap Hinge National Hardware N146-159 Flush/Full Inset Square Corner Narrow Hinge
STRAP HINGES 2IN ZN PLT
Our Price: $4.41
STRAP HINGES 5IN ZN PLT
Our Price: $4.41
National Hardware Light Strap Hinge, Flush/Full Inset, Series: V280, 6 Holes, 0.05 in Leaf Thickness, 1-1/16 in Door Leaf Length, 2 in Door Leaf Width, 1-1/16 in Frame Leaf Length, 2 in Frame Leaf Width, Fixed Pin, 0.119 in Diameter Pin, Aluminum Pin, Wall Mounting, 18 lb Load Capacity, 3-3/4 in Overall Length, 1-1/16 in Overall Width, Zinc Plated National Hardware Strap Hinge, Flush/Full Inset, Heavy Duty, Series: 282BC, 0.09 in Leaf Thickness, 5 in Door Leaf Length, 1.85 in Door Leaf Width, 5 in Frame Leaf Length, 1.85 in Frame Leaf Width, 0.27 in Diameter Pin, Wall Mounting, 70 lb Load Capacity, 9.54 in Overall Width, Hot Rolled Steel, Zinc Plated, BHMA A138.18 National Hardware Narrow Hinge, Flush/Full Inset, Square Corner, Series: V518, 4 Holes, 0.23 in Hole Diameter, 0.06 in Leaf Thickness, 2 in Door Leaf Length, 2 in Frame Leaf Length, Non-Removable Pin, 0.12 in Diameter Pin, Steel Pin, Wall Mounting, Fasteners: Screws, 10 lb Load Capacity, 2 in Overall Width, Cold Rolled Steel, Zinc Plated
National Hardware N146-068 Flush/Full Inset Square Corner Narrow Hinge National Hardware N146-258 Flush/Full Inset Square Corner Narrow Hinge National Hardware N141-739 Narrow Hinge
National Hardware Narrow Hinge, Flush/Full Inset, Square Corner, Series: V518, 4 Holes, 0.2 in Hole Diameter, 0.05 in Leaf Thickness, 1-1/2 in Door Leaf Length, 1-1/2 in Frame Leaf Length, Non-Removable Pin, 0.11 in Diameter Pin, Steel Pin, Wall Mounting, Fasteners: Screws, 7 lb Load Capacity, 1-1/2 in Overall Width, Cold Rolled Steel, Dull Brass National Hardware Narrow Hinge, Flush/Full Inset, Square Corner, Series: V518, 6 Holes, 1/4 in Hole Diameter, 0.06 in Leaf Thickness, 2-1/2 in Door Leaf Length, 2-1/2 in Frame Leaf Length, Non-Removable Pin, 0.12 in Diameter Pin, Steel Pin, Wall Mounting, Fasteners: Screws, 20 lb Load Capacity, 2-1/2 in Overall Width, Cold Rolled Steel, Zinc Plated National Hardware Narrow Hinge, Full Mortise, Series: V508, Knuckle Bearing, 4 Holes, 0.2 in Hole Diameter, 0.05 in Leaf Thickness, 1-1/2 in Door Leaf Length, 1-1/2 in Frame Leaf Length, Removable Pin, 0.11 in Diameter Pin, Wall Mounting, Fasteners: (5) Knuckle, Screws, 7 lb Load Capacity, 1.42 in Overall Width, Cold Rolled Steel, Zinc Plated
HINGE UTILITY STEEL 3X3IN ZN  National Hardware N141-606 Narrow Hinge Mintcraft LR083 Bolt Hook
Five knuckle full mortise design. Allows easy installation or removal of lightweight doors. Screws included. National Hardware Narrow Hinge, Full Mortise, Series: V508, Knuckle Bearing, 4 Holes, 0.16 in Hole Diameter, 0.05 in Leaf Thickness, 1 in Door Leaf Length, 1 in Frame Leaf Length, Removable Pin, 0.1 in Diameter Pin, Wall Mounting, Fasteners: (5) Knuckle, Screws, 7 lb Load Capacity, 1 in Overall Width, Cold Rolled Steel, Zinc Plated Can be used with gate strap hinges to support wooden gates and fences. Can be easily adjusted.
HINGE STRAP STEEL LD 2IN GALV National Hardware N141-838 Narrow Hinge Stanley 139873 Door Hinge
Use in both the interior and exterior. Screws included. National Hardware Narrow Hinge, Full Mortise, Series: V508, Knuckle Bearing, 4 Holes, 0.23 in Hole Diameter, 0.06 in Leaf Thickness, 2 in Door Leaf Length, 2 in Frame Leaf Length, Removable Pin, 0.12 in Diameter Pin, Wall Mounting, Fasteners: (5) Knuckle, Screws, 10 lb Load Capacity, 1.56 in Overall Width, Cold Rolled Steel, Zinc Plated 504. Designed for general utility and industrial applications. Hinges are swaged for mortise installations. Loose pin allows doors to be removed without taking off hinges. Plain steel version can be welded. Boxed.
Mintcraft LR094 Screw Hook HINGE BRD PLN STL 3-1/2IN     National Hardware V280 Flush/Full Inset Light Strap Hinge
STRAP HINGES 3IN ZN PLT
Our Price: $4.77
Easily installs into wood surfaces. Replaces worn or broken bolt hooks. Can be used with strap hinges. 505. Swaged for mortise installations. Manufactured with cold rolled steel. Five knuckle, full mortise design. Riveted, non-removable pin. Boxed loose barcoded. National Hardware Light Strap Hinge, Flush/Full Inset, Series: V280, 6 Holes, 0.056 in Leaf Thickness, 1-3/16 in Door Leaf Length, 3 in Door Leaf Width, 1-3/16 in Frame Leaf Length, 3 in Frame Leaf Width, Fixed Pin, 0.17 in Diameter Pin, Aluminum Pin, Wall Mounting, 5-11/16 in Overall Length, 1-3/16 in Overall Width, Hot Rolled Steel, Zinc Plated
National Hardware N146-175 Flush/Full Inset Square Corner Narrow Hinge Stanley 130146 Screw Hook HINGE UTL SQ CNR 2-1/2X1-11/16
NARROW HINGES 2IN BRS
Our Price: $4.82
National Hardware Narrow Hinge, Flush/Full Inset, Square Corner, Series: V518, 4 Holes, 0.23 in Hole Diameter, 0.06 in Leaf Thickness, 2 in Door Leaf Length, 2 in Frame Leaf Length, Non-Removable Pin, 0.12 in Diameter Pin, Steel Pin, Wall Mounting, Fasteners: Screws, 10 lb Load Capacity, 2 in Overall Width, Cold Rolled Steel, Dull Brass For use with new installations with Stanley's 130732, 131102, 248047, 131060, 130765, and 130799 hinge straps. Adjusts to correct gate sag. Lightweight steel construction. 3 Knuckles.
HINGE STRAP STEEL LD 3IN GALV HINGE UTL SQ CNR 2-1/2X1-11/16 HINGE BRD ZINC PLATED 3IN
BROAD HINGES 3IN ZN PLT
Our Price: $5.06
Use in both the interior and exterior. Screws included. Five knuckle full mortise design. Allows easy installation or removal of lightweight cabinet doors. Screws included. 504. Swaged for mortise installations. Manufactured with cold rolled steel. Five knuckle, full mortise design. Loose pin allows doors to be removed without removing hinge. Boxed loose barcoded.
National Hardware 282BC Flush/Full Inset Strap Hinge Waddell BTB25 Base Block HINGE STRAP STEEL LD 4IN ZINC
STRAP HINGES 6IN ZN PLT
Our Price: $5.08
National Hardware Strap Hinge, Flush/Full Inset, Heavy Duty, Series: 282BC, 0.1 in Leaf Thickness, 6 in Door Leaf Length, 2.43 in Door Leaf Width, 6 in Frame Leaf Length, 2.43 in Frame Leaf Width, 0.32 in Diameter Pin, Wall Mounting, 85 lb Load Capacity, 11.47 in Overall Width, Hot Rolled Steel, Zinc Plated, BHMA A138.18 No mitering decorative blocks. Installs with a hammer and finishing nails. Pine wood. Use in both the interior and exterior. Screws included.
National Hardware N141-754 Narrow Hinge National Hardware 505BC Flush/Full Inset Broad Hinge Stanley 131060 Hinge Strap
BROAD HINGES 3IN ZN PLT
Our Price: $5.15
National Hardware Narrow Hinge, Full Mortise, Series: V508, Knuckle Bearing, 4 Holes, 0.2 in Hole Diameter, 0.05 in Leaf Thickness, 1-1/2 in Door Leaf Length, 1-1/2 in Frame Leaf Length, Removable Pin, 0.11 in Diameter Pin, Wall Mounting, Fasteners: (5) Knuckle, Screws, 7 lb Load Capacity, 1.42 in Overall Width, Cold Rolled Steel, Brass National Hardware Broad Hinge, Flush/Full Inset, Series: 505BC, 6 Holes, 0.08 in Leaf Thickness, 3 in Door Leaf Length, 3 in Frame Leaf Length, Riveted, Non-Removable Pin, 0.234 in Diameter Pin, Wall Mounting, 50 lb Load Capacity, 3 in Overall Width, Cold Rolled Steel, Zinc Plated, BHMA A138.18, For Mortise Installations Designed for new installations with Stanley's 130708, 130559, 130583, and 130617 hooks. Strap punched for 5/16" (6" and 8" sizes) or 3/8" (10", 12", 14", 16" 18", 20" and 24" sizes) bolts.
National Hardware N141-945 Narrow Hinge Stanley 131227 Hinge Screw Eye Palram 92770 Horizontal Closure Strip
National Hardware Narrow Hinge, Full Mortise, Series: V508, Knuckle Bearing, 6 Holes, 0.23 in Hole Diameter, 0.06 in Leaf Thickness, 2-1/2 in Door Leaf Length, 2-1/2 in Frame Leaf Length, Removable Pin, 0.12 in Diameter Pin, Wall Mounting, Fasteners: (5) Knuckle, Screws, 20 lb Load Capacity, 1.68 in Overall Width, Cold Rolled Steel, Zinc Plated To be used in wood gate applications in conjunction with screw hooks, bolt hooks and pintles. Used under Suntuf panels on each cross support or purlin. Provides support for fasteners when attaching panels to framing. Custom profile matches pitch and depth of panel corrugation.
Palram 92771 Horizontal Closure Strip National Hardware N146-373 Flush/Full Inset Square Corner Narrow Hinge American Wood PCLR1X3-6 4-Sided Sanded Common Board
Used under Palruf or Suntop panels on each cross support or purlin. Provides support for fasteners when attaching panels to framing. Custom profile matches pitch and depth of panel corrugation. National Hardware Narrow Hinge, Flush/Full Inset, Square Corner, Series: V518, 6 Holes, 1/4 in Hole Diameter, 0.07 in Leaf Thickness, 3 in Door Leaf Length, 3 in Frame Leaf Length, Non-Removable Pin, 0.16 in Diameter Pin, Steel Pin, Wall Mounting, Fasteners: Screws, 28 lb Load Capacity, 3 in Overall Width, Cold Rolled Steel, Zinc Plated Sanded on 4 sides.
National Hardware N146-290 Flush/Full Inset Square Corner Narrow Hinge HINGE UTL STL GALV 3X3IN      American Wood PCOM-184 Common Board
National Hardware Narrow Hinge, Flush/Full Inset, Square Corner, Series: V518, 6 Holes, 1/4 in Hole Diameter, 0.06 in Leaf Thickness, 2-1/2 in Door Leaf Length, 2-1/2 in Frame Leaf Length, Non-Removable Pin, 0.12 in Diameter Pin, Steel Pin, Wall Mounting, Fasteners: Screws, 20 lb Load Capacity, 2-1/2 in Overall Width, Cold Rolled Steel, Brass Five knuckle full mortise design. Allows easy installation or removal of lightweight doors. Screws included. American Wood Common Board, 1 in Thickness, 8 in Width, 4 ft Length, Pine
National Hardware N141-879 Narrow Hinge Woodtite 92523 Self Drilling Screw 2 in HINGE UTILITY STL 3-1/2X3-1/2
NARROW HINGES 2IN BRS
Our Price: $5.82
National Hardware Narrow Hinge, Full Mortise, Series: V508, Knuckle Bearing, 4 Holes, 0.23 in Hole Diameter, 0.06 in Leaf Thickness, 2 in Door Leaf Length, 2 in Frame Leaf Length, Removable Pin, 0.12 in Diameter Pin, Wall Mounting, Fasteners: (5) Knuckle, Screws, 10 lb Load Capacity, 1.56 in Overall Width, Cold Rolled Steel, Brass Woodtite 1" screw (sku 940.4302) with EPDM washer is used to fasten PVC, Sun-n-Rain and Palruf or Polycarbonate, Suntop and Suntuf, corrugated panels in a siding or cladding application and Woodtite 2" screw (sku 171.0235) also with EPDM washer is used to crown fasten PVC, Sun-n-Rain and Palruf or Polycarbonate, Suntop and Suntuf, corrugated panels in a roofing application. Five knuckle full mortise design. Allows easy installation or removal of lightweight doors. Screws included.
HINGE BRD ZINC PLATED 3-1/2IN Stanley 131102 Hinge Strap Mintcraft LR095 Screw Hook
504. Swaged for mortise installations. Manufactured with cold rolled steel. Five knuckle, full mortise design. Loose pin allows doors to be removed without removing hinge. Boxed loose barcoded. Designed for new installations with Stanley's 130708, 130559, 130583, and 130617 hooks. Strap punched for 5/16" (6" and 8" sizes) or 3/8" (10", 12", 14", 16" 18", 20" and 24" sizes) bolts. Easily installs into wood surfaces. Replaces worn or broken bolt hooks. Can be used with strap hinges.
Waddell BTB35 Base Block National Hardware 505BC Flush/Full Inset Broad Hinge Stanley 130559 Full Threaded Bolt Hook
No mitering decorative blocks. Installs with a hammer and finishing nails. Pine wood. National Hardware Broad Hinge, Flush/Full Inset, Series: 505BC, 6 Holes, 0.23 in Hole Diameter, 0.11 in Leaf Thickness, 3-1/2 in Door Leaf Length, 3-1/2 in Frame Leaf Length, Riveted, Non-Removable Pin, 0.27 in Diameter Pin, Wall Mounting, 70 lb Load Capacity, 3.62 in Overall Length, 3-1/2 in Overall Width, Cold Rolled Steel, Zinc Plated Adjust to correct gate sag. Includes 2 washers and 2 nuts per hook. Full threaded hook is bolted through the post and firmly secured with standard size nuts and washers on each side. As a replacement part: use with National's 292 Bold Hook. For new installations: use with National's #294 Hinge Straps. Use with the Stanley/National Strap size 14"(N130-799), 16"(N168-336), and the 18"(N248-039).
National Hardware N141-960 Narrow Hinge HINGE UTL SQ CNR ZN PLT 3X2IN American Wood PLCR1X4-6 4-Sided Sanded Common Board
National Hardware Narrow Hinge, Full Mortise, Series: V508, Knuckle Bearing, 6 Holes, 0.23 in Hole Diameter, 0.06 in Leaf Thickness, 2-1/2 in Door Leaf Length, 2-1/2 in Frame Leaf Length, Removable Pin, 0.12 in Diameter Pin, Wall Mounting, Fasteners: (5) Knuckle, Screws, 20 lb Load Capacity, 1.68 in Overall Width, Cold Rolled Steel, Brass Five knuckle full mortise design. Allows easy installation or removal of lightweight cabinet doors. Screws included. Sanded on 4 sides.
American Wood PLCR1X3-4 4-Sided Sanded Common Board Palram 94361 Horizontal Closure Strip Palram 92772 Vertical Closure Strip
Sanded on 4 sides. Used under Sun-n-Rain panels on each cross support or purlin. Provides support for fasteners when attaching panels to framing. Custom profile matches pitch and depth of panel corrugation. Use under Palram's corrugated panels to close off vertical edges for a finished look.
National Hardware N142-034 Narrow Hinge National Hardware N146-399 Flush/Full Inset Square Corner Narrow Hinge HINGE STRAP STEEL LD 6IN ZINC
NARROW HINGES 3IN BRS
Our Price: $6.52
National Hardware Narrow Hinge, Full Mortise, Series: V508, Knuckle Bearing, 6 Holes, 1/4 in Hole Diameter, 0.07 in Leaf Thickness, 3 in Door Leaf Length, 3 in Frame Leaf Length, Removable Pin, 0.16 in Diameter Pin, Wall Mounting, Fasteners: (5) Knuckle, Screws, 28 lb Load Capacity, 2.06 in Overall Width, Cold Rolled Steel, Zinc Plated National Hardware Narrow Hinge, Flush/Full Inset, Square Corner, Series: V518, 6 Holes, 1/4 in Hole Diameter, 0.07 in Leaf Thickness, 3 in Door Leaf Length, 3 in Frame Leaf Length, Non-Removable Pin, 0.16 in Diameter Pin, Steel Pin, Wall Mounting, Fasteners: Screws, 28 lb Load Capacity, 3 in Overall Width, Cold Rolled Steel, Brass Use in both the interior and exterior. Screws included.
Stanley 139998 Door Hinge HINGE BRD PLN STL 4IN         Stanley N128-249 Strap Hinge
STRAP HINGES 4IN GALV
Our Price: $6.70
504. Designed for general utility and industrial applications. Hinges are swaged for mortise installations. Loose pin allows doors to be removed without taking off hinges. Plain steel version can be welded. Boxed. 505. Swaged for mortise installations. Manufactured with cold rolled steel. Five knuckle, full mortise design. Riveted, non-removable pin. Boxed loose barcoded. National Strap Hinge, Heavy Duty, Series: N128-249, Suitable For Use With: Barn, Shed Doors, Storage Bins, Tool Boxes and Gates, 3 Holes, 4 in Door Leaf, 1.61 in Door Leaf, Tight Pin, Brass Pin, Screw Mounting, Fasteners: NO 7 Screw, Steel, Galvanized
National Hardware V280 Flush/Full Inset Light Strap Hinge Mintcraft LR085 Bolt Hook National Hardware 505BC Flush/Full Inset Broad Hinge
STRAP HINGES 4IN ZN PLT
Our Price: $6.70
BROAD HINGES 4IN ZN PLT
Our Price: $6.79
National Hardware Light Strap Hinge, Flush/Full Inset, Series: V280, 6 Holes, 0.056 in Leaf Thickness, 1-1/4 in Door Leaf Length, 4 in Door Leaf Width, 1-1/4 in Frame Leaf Length, 4 in Frame Leaf Width, Fixed Pin, 0.195 in Diameter Pin, Aluminum Pin, Wall Mounting, 8 lb Load Capacity, 7-11/16 in Overall Length, 1-1/4 in Overall Width, Zinc Plated Can be used with gate strap hinges to support wooden gates and fences. Can be easily adjusted. National Hardware Broad Hinge, Flush/Full Inset, Series: 505BC, 8 Holes, 0.29 in Hole Diameter, 0.11 in Leaf Thickness, 4 in Door Leaf Length, 4 in Frame Leaf Length, Riveted, Non-Removable Pin, 0.27 in Diameter Pin, Wall Mounting, 70 lb Load Capacity, 4.14 in Overall Length, 4 in Overall Width, Cold Rolled Steel, Zinc Plated, BHMA A138.18
HINGE BRD ZINC PLATED 4IN     National Hardware N142-067 Narrow Hinge American Wood PLYRND3/4X11-3/4 Round Plywood
BROAD HINGES 4IN ZN PLT
Our Price: $6.84
NARROW HINGES 3IN BRS
Our Price: $6.88
504. Swaged for mortise installations. Manufactured with cold rolled steel. Five knuckle, full mortise design. Loose pin allows doors to be removed without removing hinge. Boxed loose barcoded. National Hardware Narrow Hinge, Full Mortise, Series: V508, Knuckle Bearing, 6 Holes, 1/4 in Hole Diameter, 0.07 in Leaf Thickness, 3 in Door Leaf Length, 3 in Frame Leaf Length, Removable Pin, 0.16 in Diameter Pin, Wall Mounting, Fasteners: (5) Knuckle, Screws, 28 lb Load Capacity, 2.06 in Overall Width, Cold Rolled Steel, Brass American Wood Plywood, Round, 3/4 in Thickness, 11-3/4 in Width
Waddell RTB35OAK Rosette Trim Block National Hardware 282BC Flush/Full Inset Strap Hinge American Wood STUD2X4X6 Stud Grade Wood Molding
STRAP HINGES 8IN ZN PLT
Our Price: $7.18
No mitering decorative blocks. Installs with a hammer and finishing nails. Oak wood. National Hardware Strap Hinge, Flush/Full Inset, Heavy Duty, Series: 282BC, 0.11 in Leaf Thickness, 8 in Door Leaf Length, 3.08 in Door Leaf Width, 8 in Frame Leaf Length, 3.08 in Frame Leaf Width, 0.39 in Diameter Pin, Wall Mounting, 15.39 in Overall Width, Hot Rolled Steel, Zinc Plated, BHMA A138.18, For Residential Applications American Wood Wood Molding, Stud Grade, 2 in Thickness, 4 in Width, 6 ft Length
Cloverdale 28050 Iron-On Edge Band Cloverdale 28010 Edge Band HINGE STRAP STEEL LD 4IN GALV
Use on desktop, antique, shelving cabinets, crafts, hobbies, etc. Pre-sanded and ready to finish. Trims with edge trimmer or utility knife. Paper backed with a resin-impregnated paper that prevents splitting. Furniture grade, pre-sanded and ready to finish as desired with preheated (400 degree) iron, press length of edging till glue has melted if mistake in application is made, simply reheat and reapply. Allow edging to cool completely before finishing other pieces. Use on desktop, antique, shelving cabinets, crafts, hobbies, etc. Pre-sanded and ready to finish. Trims with edge trimmer or utility knife. Paper backed with a resin-impregnated paper that prevents splitting. Furniture grade, pre-sanded and ready to finish as desired with preheated (400 degree) iron, press length of edging till glue has melted if mistake in application is made, simply reheat and reapply. Allow edging to cool completely before finishing other pieces. Use in both the interior and exterior. Screws included.
American Wood 2X3X8 Stud Grade Wood Molding HINGE UTL GALV 3-1/2X3-1/2IN  National Hardware N348-979 Decorative Narrow Narrow Hinge
American Wood Wood Molding, Stud Grade, 2 in Thickness, 3 in Width, 8 ft Length Five knuckle full mortise design. Allows easy installation or removal of lightweight doors. Screws included. National Hardware Narrow Hinge, Decorative, Narrow, Series: V519, 4 Holes, Non-Removable Pin, 7 lb Load Capacity, 1-1/2 in Overall Width, Stainless Steel, Stainless Steel, BHMA A138.18, For Lightweight Doors, Chests and Cabinets
HINGE UTILITY STEEL 4X4IN ZN  Waddell ICTB31 Inside Crown Corner Block HOOK SCREW/HINGE STRAP 6IN
Five knuckle full mortise design. Allows easy installation or removal of lightweight doors. Screws included. No mitering decorative blocks. Installs with a hammer and finishing nails. Pine wood. Replaces worn or broken bolt hooks.  Can be used with strap hinges
Band-It 88265 Iron-On Edge Band 7/8 in W 25 ft L National Hardware V504 Broad Hinge Stanley 130179 Screw Hook
BROAD HINGES 4IN ZN PLT
Our Price: $7.75
Use on desktop, antique, shelving cabinets, crafts, hobbies, etc. Applies to wood, plywood particle board, hardboard, metal, and more. Prefinished and colorfast; heat and stain resistant; washable and static free. Flexible and durable (not recommended for surface subject to sharp tools). Trims with edge trimmer or utility knife. Cut edge 1/2" longer than surface to be covered with preheat (400 degree) iron, press length of edging till glue has melted while still hot, press edging down firmly with wood block or re-apply. Carded. National Hardware Broad Hinge, Full Mortise, Series: V504, Knuckle Bearing, 8 Holes, 0.29 in Hole Diameter, 0.11 in Leaf Thickness, 4 in Door Leaf Length, 4 in Frame Leaf Length, Removable Pin, 0.27 in Diameter Pin, Brass Pin, Wall Mounting, Fasteners: (5) Knuckle, Screws, 70 lb Load Capacity, 4 in Overall Width, Cold Rolled Steel, Zinc Plated For use with new installations with Stanley's 130732, 131102, 248047, 131060, 130765, and 130799 hinge straps. Adjusts to correct gate sag.
American Wood 309532 Stud Grade Wood Molding HOOK SCREW/HINGE STRAP 8IN    Stanley 131375 Pintle
American Wood Wood Molding, Stud Grade, American Wood, 2 in Thickness, 4 in Width, 8 ft Length Replaces worn or broken bolt hooks.  Can be used with strap hinges Designed for use with Stanley's 130732, 131102, 248047, 131060, 248039, 130765, 168336, and 130799 hinge straps. Gate can be easily lifted off of pintle. Designed for heavy-duty gates and doors. Pintle punched for 5/16" (1/2" size) or 3/8" (5/8" size) bolts.
National Hardware N348-987 Decorative Narrow Narrow Hinge Stanley 130732 Hinge Strap National Hardware V280 Flush/Full Inset Light Strap Hinge
NARROW HINGES 2IN SS
Our Price: $8.44
STRAP HINGES 5IN ZN PLT
Our Price: $8.53
National Hardware Narrow Hinge, Decorative, Narrow, Series: V519, 4 Holes, Non-Removable Pin, 10 lb Load Capacity, 2 in Overall Width, Stainless Steel, Stainless Steel, BHMA A138.18, For Lightweight Doors, Chests and Cabinets Designed for new installations with Stanley's 130708, 130559, 130583, and 130617 hooks. Strap punched for 5/16" (6" and 8" sizes) or 3/8" (10", 12", 14", 16" 18", 20" and 24" sizes) bolts. National Hardware Light Strap Hinge, Flush/Full Inset, Series: V280, 6 Holes, 0.072 in Leaf Thickness, 1-1/2 in Door Leaf Length, 5 in Door Leaf Width, 1-1/2 in Frame Leaf Length, 5 in Frame Leaf Width, Fixed Pin, 0.195 in Diameter Pin, Aluminum Pin, Wall Mounting, 9-5/8 in Overall Length, 1-1/2 in Overall Width, Hot Rolled Steel, Zinc Plated
American Wood WH-1X4X4 Hardwood Board American Wood PLCR1X4-4 4-Sided Sanded Common Board Palram 92520 Horizontal Closure Strip
White hardwood boards. Sanded on 4 sides. Used under Suntuf panels on each cross support or purlin. Provides support for fasteners when attaching panels to framing. Custom profile matches pitch and depth of panel corrugation.
American Wood 309533 Common Board Stanley 130617 Full Threaded Bolt Hook HINGE STRAP STEEL LD 6IN GALV
American Wood Common Board, American Wood, 1 in Thickness, 4 in Width, 8 ft Length, Pine Adjust to correct gate sag. Includes 2 washers and 2 nuts per hook. Full threaded hook is bolted through the post and firmly secured with standard size nuts and washers on each side. As a replacement part: use with National's 292 Bold Hook. For new installations: use with National's #294 Hinge Straps. Use with the Stanley/National Strap size 14"(N130-799), 16"(N168-336), and the 18"(N248-039). Use in both the interior and exterior. Riveted brass pin. 1.8mm thickness.
Waddell BTB35OAK Base Block Waddell BTBC35 Center Base Block HINGE UTILITY 4-1/2INX4-1/2IN
No mitering decorative blocks. Installs with a hammer and finishing nails. Oak wood. No mitering decorative blocks. Installs with a hammer and finishing nails. Pine wood. Five knuckle full mortise design. Allows easy installation or removal of lightweight doors. Screws included.
National Hardware N195-644 Broad Hinge American Wood DEFENCE1X6T Dog Ear Board American Wood PLCR1X6-4 4-Sided Sanded Common Board
National Hardware Broad Hinge, Full Mortise, Series: V504, Knuckle Bearing, 6 Holes, 0.077 in Leaf Thickness, 2-1/2 in Door Leaf Length, 2-1/2 in Frame Leaf Length, Removable Pin, Brass Pin, Wall Mounting, Fasteners: (5) Knuckle, Screws, 43 lb Load Capacity, 2-1/2 in Overall Width, Cold Rolled Steel, Zinc Plated, BHMA A138.18 Tops are cut off at an angle. Sanded on 4 sides.
Metalite 92525 Self Drilling Screw 2 in HINGE UTL SQ CNR ZN STL 5X5IN Mintcraft LR096 Screw Hook
Self-drilling tapping screws for fastening polycarbonate and PVC directly to aluminum and steel supporting members. Hex-head with weatherseal washer. Five knuckle full mortise design. Allows easy installation or removal of lightweight doors. Screws included. Easily installs into wood surfaces. Replaces worn or broken bolt hooks. Can be used with strap hinges.
Mintcraft LR084 Bolt Hook Stanley 131409 Pintle Stanley 130765 Hinge Strap
Can be used with gate strap hinges to support wooden gates and fences. Can be easily adjusted. Designed for use with Stanley's 130732, 131102, 248047, 131060, 248039, 130765, 168336, and 130799 hinge straps. Gate can be easily lifted off of pintle. Designed for heavy-duty gates and doors. Pintle punched for 5/16" (1/2" size) or 3/8" (5/8" size) bolts. Designed for new installations with Stanley's 130708, 130559, 130583, and 130617 hooks. Strap punched for 5/16" (6" and 8" sizes) or 3/8" (10", 12", 14", 16" 18", 20" and 24" sizes) bolts.
HINGE STRAP GALV 5IN          Band-It 78210 Edge Band 7/8 in W 25 ft L Band-It 78250 Edge Band 7/8 in W 25 ft L
STRAP HINGES 5IN GALV
Our Price: $9.36
Offset screw holes for extra strength and to prevent wood from splitting. Tight pin for left or right hand applications. Manufactured with hot-rolled steel. Use on desktop, antique, shelving cabinets, crafts, hobbies, etc. Pre-sanded and ready to finish. Trims with edge trimmer or utility knife. Paper backed with a resin-impregnated paper that prevents splitting. Furniture grade, pre-sanded and ready to finish as desired with preheated (400 degree) iron, press length of edging till glue has melted if mistake in application is made, simply reheat and reapply. Allow edging to cool completely before finishing other pieces. Use on desktop, antique, shelving cabinets, crafts, hobbies, etc. Pre-sanded and ready to finish. Trims with edge trimmer or utility knife. Paper backed with a resin-impregnated paper that prevents splitting. Furniture grade, pre-sanded and ready to finish as desired with preheated (400 degree) iron, press length of edging till glue has melted if mistake in application is made, simply reheat and reapply. Allow edging to cool completely before finishing other pieces.
Band-It 33437 Single Sided Edge Trimmer Mintcraft LSH-Z02-013L Light Duty Strap Hinge Mintcraft LR086 Bolt Hook
Cleanly cuts in both directions. Compact size. Provides exacting control for flush trimming wood veneer, melamine, PVC and polyester edgebanding. 3" x 2.25" x 1". Use in both the interior and exterior. Rust resistant. Can be used with gate strap hinges to support wooden gates and fences. Can be easily adjusted.
National Hardware N195-651 Broad Hinge National Hardware V130 Flush/Full Inset Cafe Door Hinge Stanley 130799 Hinge Strap
BROAD HINGES 3IN ZN PLT
Our Price: $10.20
CAFE DOOR HINGES BRS
Our Price: $10.27
National Hardware Broad Hinge, Full Mortise, Series: V504, Knuckle Bearing, 6 Holes, 0.08 in Leaf Thickness, 3 in Door Leaf Length, 3 in Frame Leaf Length, Removable Pin, Brass Pin, Wall Mounting, Fasteners: (5) Knuckle, Screws, 50 lb Load Capacity, 3 in Overall Width, Cold Rolled Steel, Zinc Plated, BHMA A138.18, For Residential Applications National Hardware Cafe Door Hinge, Flush/Full Inset, Series: V130, Removable Pin, Wall Mounting, 50 lb Load Capacity, Steel/Die Cast/Delrin, Brass, Includes: Removable ramps, 180 deg Opening, For Commercial/Industrial and Residential Applications Designed for new installations with Stanley's 130708, 130559, 130583, and 130617 hooks. Strap punched for 5/16" (6" and 8" sizes) or 3/8" (10", 12", 14", 16" 18", 20" and 24" sizes) bolts.
HOOK SCREW/HINGE STRAP 10IN   Stanley 130203 Screw Hook Stanley 130583 Full Threaded Bolt Hook
Replaces worn or broken bolt hooks.  Can be used with strap hinges For use with new installations with Stanley's 130732, 131102, 248047, 131060, 130765, and 130799 hinge straps. Adjusts to correct gate sag. Adjust to correct gate sag. Includes 2 washers and 2 nuts per hook. Full threaded hook is bolted through the post and firmly secured with standard size nuts and washers on each side. As a replacement part: use with National's 292 Bold Hook. For new installations: use with National's #294 Hinge Straps. Use with the Stanley/National Strap size 14"(N130-799), 16"(N168-336), and the 18"(N248-039).
Stanley N128-322 Strap Hinge National Hardware V519 Decorative Narrow Narrow Hinge HINGE STRAP STEEL HD 4IN ZINC
STRAP HINGES 6IN GALV
Our Price: $10.61
NARROW HINGES 3IN SS
Our Price: $10.70
National Strap Hinge, Heavy Duty, Series: N128-322, Suitable For Use With: Barn, Shed Doors, Storage Bins, Tool Boxes and Gates, 4 Holes, 6 in Door Leaf, 2.43 in Door Leaf, Tight Pin, Brass Pin, Screw Mounting, Fasteners: NO 9 Screw, Steel, Galvanized National Hardware Narrow Hinge, Decorative, Narrow, Series: V519, 6 Holes, Non-Removable Pin, 28 lb Load Capacity, 3 in Overall Width, Stainless Steel, Stainless Steel, BHMA A138.18, For Lightweight Doors, Chests and Cabinets Ideal for doors, gates, sheds and toolboxes. Screws included.
HINGE GRAVITY PIVOT SAT BRS   American Wood 2X6X8 Stud Grade Wood Molding HINGE STRAP STL HD 4IN BLACK
Designed for lightweight louvered and cafe doors that are 3/4" to 1-3/8" thick.  Automatically returns the door to the center opening. Holds door open at 90 degrees on either side of opening. American Wood Wood Molding, Stud Grade, 2 in Thickness, 6 in Width, 8 ft Length Ideal for doors, gates, sheds and toolboxes. Screws included.
National Hardware N195-669 Broad Hinge American Wood PLCR1X8-4 4-Sided Sanded Common Board HINGE BRD PLN STL 4-1/2IN
National Hardware Broad Hinge, Full Mortise, Series: V504, Knuckle Bearing, 6 Holes, 0.23 in Hole Diameter, 0.11 in Leaf Thickness, 3-1/2 in Door Leaf Length, 3-1/2 in Frame Leaf Length, Removable Pin, 0.27 in Diameter Pin, Brass Pin, Wall Mounting, Fasteners: (5) Knuckle, Screws, 70 lb Load Capacity, 3-1/2 in Overall Width, Cold Rolled Steel Sanded on 4 sides. National Hardware Broad Hinge, Series: 504BC, Full Mortise, 8 Holes, 0.34 in Hole Diameter, 0.13 in Leaf Thickness, Removable, Loose Pin, 0.27 in Dia Pin, Fasteners: 5-Knuckle, 90 lb Load Capacity, 4-1/2 in Overall Length, 4-1/2 in Overall Width, Cold Rolled Steel, Plain
Thunderbird Forest 309534 Common Board National Hardware V514 Square Corner Door Hinge HOOK SCREW/HINGE STRAP 12IN
DOOR HINGES 1-1/2IN SS
Our Price: $11.79
Alexandria Moulding Common Board, 1 in Thickness, 6 in Width, 8 ft Length, Pine, For Shelving and Household Projects National Hardware Door Hinge, Full Mortise, Square Corner, Series: V514, Knuckle Bearing, 4 Holes, 1-1/2 in Door Leaf Length, 1-1/2 in Frame Leaf Length, Non-Rising, Removable Pin, Wall Mounting, Fasteners: (5) Knuckles, NO 9 Flat Head Screws, 10 lb Load Capacity, 1-1/2 in Overall Width, Stainless Steel, Stainless Steel, BHMA A138.18 Replaces worn or broken bolt hooks.  Can be used with strap hinges
Palram 92593 Wall-Tuf Rivet 3/4 in L American Wood STUD2X4X8T Stud Grade Wood Molding American Wood PCLR1X6-6 4-Sided Sanded Common Board
Rivets can be used in conjunction with adhesive when attaching WallTuf panels to a substrate. 50 rivets per bag. American Wood Wood Molding, Stud Grade, 2 in Thickness, 4 in Width, 8 ft Length, Press Treated Sanded on 4 sides.
Stanley 130641 Full Threaded Bolt Hook National Hardware V514 Square Corner Door Hinge American Wood OAK-1X4X4 Common Board
DOOR HINGES 2IN SS
Our Price: $12.36
Adjust to correct gate sag. Includes 2 washers and 2 nuts per hook. Full threaded hook is bolted through the post and firmly secured with standard size nuts and washers on each side. As a replacement part: use with National's 292 Bold Hook. For new installations: use with National's #294 Hinge Straps. Use with the Stanley/National Strap size 14"(N130-799), 16"(N168-336), and the 18"(N248-039). National Hardware Door Hinge, Full Mortise, Square Corner, Series: V514, Knuckle Bearing, 4 Holes, 0.21 in Hole Diameter, 0.08 in Leaf Thickness, 2 in Door Leaf Length, 2 in Frame Leaf Length, Non-Rising, Removable Pin, 0.19 in Diameter Pin, Wall Mounting, Fasteners: (5) Knuckles, NO 9 Flat Head Screws, 15 lb Load Capacity, 2 in Overall Width American Wood Common Board, 1 in Thickness, 4 in Width, 4 ft Length, Oak
HINGE STRAP STL HD 6IN BLACK  National Hardware 282BC Flush/Full Inset Strap Hinge National Hardware 505BC Flush/Full Inset Broad Hinge
STRAP HINGES 10IN ZN PLT
Our Price: $12.63
Ideal for doors, gates, sheds and toolboxes. Screws included. National Hardware Strap Hinge, Flush/Full Inset, Heavy Duty, Series: 282BC, 0.36 in Hole Diameter, 0.14 in Leaf Thickness, 10 in Door Leaf Length, 3.68 in Door Leaf Width, 10 in Frame Leaf Length, 3.68 in Frame Leaf Width, 0.44 in Diameter Pin, Wall Mounting, 20 in Overall Width, Hot Rolled Steel, Zinc Plated, BHMA A138.18 National Hardware Broad Hinge, Flush/Full Inset, Series: 505BC, 8 Holes, 4-1/2 in Door Leaf Length, 4-1/2 in Frame Leaf Length, Riveted, Non-Removable Pin, Wall Mounting, 90 lb Load Capacity, 4-1/2 in Overall Width, Cold Rolled Steel, Zinc Plated, BHMA A138.18, For Mortise Installations
American Wood CLRPPAN-142 Plywood Stanley 168336 Hinge Strap BOARD HARDWOOD WHT 1X6INX4FT
American Wood Plywood, 1/4 in Thickness, 2 in Width, 4 ft Length, 301947, BC Grade Designed for new installations with Stanley's 130708, 130559, 130583, and 130617 hooks. Strap punched for 5/16" (6" and 8" sizes) or 3/8" (10", 12", 14", 16" 18", 20" and 24" sizes) bolts. White hardwood boards.
Mintcraft LSH-Z03-013L Light Duty Strap Hinge American Wood Round Plywood HINGE S-H/STRP ZINC PLTD 6IN
Use in both the interior and exterior. Rust resistant. American Wood Plywood, Round, American Wood, 3/4 in Thickness, 17-3/4 in Length Designed for use on gates, utility sheds, barn doors, etc. Adjusts to correct gate sag. Gate can be lifted off the screw hooks. Strap punched for 5/16 In. or 3/8 In. bolts. Mounting bolts are NOT included. Manufactured from hot-rolled steel. Boxed loose barcoded.
Stanley 130674 Full Threaded Bolt Hook Waddell ICTB52 Inside Crown Corner Block American Wood PLCR1X8-6 4-Sided Sanded Common Board
Adjust to correct gate sag. Includes 2 washers and 2 nuts per hook. Full threaded hook is bolted through the post and firmly secured with standard size nuts and washers on each side. As a replacement part: use with National's 292 Bold Hook. For new installations: use with National's #294 Hinge Straps. Use with the Stanley/National Strap size 14"(N130-799), 16"(N168-336), and the 18"(N248-039). No mitering decorative blocks. Installs with a hammer and finishing nails. Pine wood. Sanded on 4 sides.
HINGE S-H/STRP ZINC PLTD 8IN  National Hardware V514 Square Corner Door Hinge HINGE STRAP GALV 8IN
DOOR HINGES 2-1/2IN SS
Our Price: $14.98
STRAP HINGES 8IN GALV
Our Price: $15.32
Designed for use on gates, utility sheds, barn doors, etc. Adjusts to correct gate sag. Gate can be lifted off the screw hooks. Strap punched for 5/16 In. or 3/8 In. bolts. Mounting bolts are NOT included. Manufactured from hot-rolled steel. Boxed loose barcoded. National Hardware Door Hinge, Full Mortise, Square Corner, Series: V514, Knuckle Bearing, 6 Holes, 1/4 in Hole Diameter, 0.08 in Leaf Thickness, 2-1/2 in Door Leaf Length, 2-1/2 in Frame Leaf Length, Non-Rising, Removable Pin, 0.212 in Diameter Pin, Wall Mounting, Fasteners: (5) Knuckles, NO 9 Flat Head Screws, 35 lb Load Capacity, Stainless Steel Offset screw holes for extra strength and to prevent wood from splitting. Tight pin for left or right hand applications. Manufactured with hot-rolled steel.
HINGE STRAP STEEL EX-HD 5IN SS American Wood PCOM-188 Common Board National Hardware V514 Square Corner Door Hinge
DOOR HINGES 3IN SS
Our Price: $16.18
Ideal for doors, gates, sheds and toolboxes. Screws included. American Wood Common Board, 1 in Thickness, 8 in Width, 8 ft Length, Pine, 309535 National Hardware Door Hinge, Full Mortise, Square Corner, Series: V514, Knuckle Bearing, 6 Holes, 3 in Door Leaf Length, 3 in Frame Leaf Length, Non-Rising, Removable Pin, Wall Mounting, Fasteners: (5) Knuckles, NO 9 Flat Head Screws, 50 lb Load Capacity, 3 in Overall Width, Stainless Steel, Stainless Steel, BHMA A138.18
National Hardware V281 Flush/Full Inset Strap Hinge American Wood 301945 Sanded Face Plywood Stanley 248039 Hinge Strap
STRAP HINGES 6IN SS
Our Price: $16.84
National Hardware Strap Hinge, Flush/Full Inset, Heavy Duty, Series: V281, 6 in Door Leaf Length, 6 in Frame Leaf Length, Fixed Pin, Wall Mounting, Stainless Steel, Stainless Steel, BHMA A138.18, For Commercial/Industrial and Residential Applications American Wood Plywood, Sanded Face, American Wood, 1/2 in Thickness, 2 ft Width, 4 ft Length, Grade BC Designed for new installations with Stanley's 130708, 130559, 130583, and 130617 hooks. Strap punched for 5/16" (6" and 8" sizes) or 3/8" (10", 12", 14", 16" 18", 20" and 24" sizes) bolts.
HINGE STRAP STEEL EX-HD 6IN SS Stanley 127357 Light Duty Strap Hinge American Wood PEGBRD-31644 Standard Perforated Hardboard
Ideal for doors, gates, sheds and toolboxes. Screws included. Offset screw holes for extra strength and to prevent wood from splitting. Tight pin for left or right hand applications. Steel with aluminum pin. Safe working load: 18 lbs. Boxed loose. American Wood Perforated Hardboard, Standard, 3/16 in Thickness, 4 ft Width, 4 ft Length, 31644
Stanley 130708 Full Threaded Bolt Hook HINGE STRAP STEEL EX-HD 4IN SS National Hardware N208-835 Broad Hinge
BROAD HINGES 3IN GALV
Our Price: $18.54
Adjust to correct gate sag. Includes 2 washers and 2 nuts per hook. Full threaded hook is bolted through the post and firmly secured with standard size nuts and washers on each side. As a replacement part: use with National's 292 Bold Hook. For new installations: use with National's #294 Hinge Straps. Use with the Stanley/National Strap size 14"(N130-799), 16"(N168-336), and the 18"(N248-039). Ideal for doors, gates, sheds and toolboxes. Screws included. National Hardware Broad Hinge, Full Mortise, Series: V504, Knuckle Bearing, 6 Holes, 3 in Door Leaf Length, 3 in Frame Leaf Length, Removable Pin, Brass Pin, Wall Mounting, Fasteners: (5) Knuckle, Screws, 50 lb Load Capacity, 3 in Overall Width, Cold Rolled Steel, Galvanized, BHMA A138.18, For Residential Applications
HINGE STRAP STEEL HD 6IN GALV American Wood PLCR1X12-4 4-Sided Sanded Common Board HINGE BRD ZINC PLATED 5IN
BROAD HINGES 5IN ZN PLT
Our Price: $20.16
Ideal for doors, gates, sheds and toolboxes. Screws included. Sanded on 4 sides. National Hardware Door Hinge, Series: 505BC, Full Mortise, 8 Holes, 0.26 in Hole Diameter, 0.15 in Leaf Thickness, Non-Removable, Riveted Pin, 0.29 in Dia Pin, Fasteners: 5-Knuckle, 110 lb Load Capacity, 5 in Overall Length, 5.11 in Overall Width, Cold Rolled Steel, Zinc Plated, Standards: BHMA A138.18
HINGE S-H/STRP ZINC PLTD 10IN National Hardware N208-843 Broad Hinge Mintcraft LSH-Z04-013L Light Duty Strap Hinge
BROAD HINGES 3-1/2IN GALV
Our Price: $20.86
Designed for use on gates, utility sheds, barn doors, etc. Adjusts to correct gate sag. Gate can be lifted off the screw hooks. Strap punched for 5/16 In. or 3/8 In. bolts. Mounting bolts are NOT included. Manufactured from hot-rolled steel. Boxed loose barcoded. National Hardware Broad Hinge, Full Mortise, Series: V504, Knuckle Bearing, 6 Holes, 3-1/2 in Door Leaf Length, 3-1/2 in Frame Leaf Length, Removable Pin, Brass Pin, Wall Mounting, Fasteners: (5) Knuckle, Screws, 70 lb Load Capacity, 3-1/2 in Overall Width, Cold Rolled Steel, Galvanized, BHMA A138.18, For Residential Applications Use in both the interior and exterior. Rust resistant.
HINGE STRAP ZINC PLATED 12IN  HINGE S-H/STRP ZINC PLTD 12IN Stanley 248047 Hinge Strap
STRAP HINGES 12IN ZN PLT
Our Price: $22.66
National Strap Hinge, Heavy Duty, Wall Mounting, 12 in Overall Length, 12 ga Steel, Zinc-Plated, For Home, Farm, Builder or Industrial Customers Designed for use on gates, utility sheds, barn doors, etc. Adjusts to correct gate sag. Gate can be lifted off the screw hooks. Strap punched for 5/16 In. or 3/8 In. bolts. Mounting bolts are NOT included. Manufactured from hot-rolled steel. Boxed loose barcoded. Designed for new installations with Stanley's 130708, 130559, 130583, and 130617 hooks. Strap punched for 5/16" (6" and 8" sizes) or 3/8" (10", 12", 14", 16" 18", 20" and 24" sizes) bolts.
American Wood 301949 Sanded Face Plywood Suntuff 108657 Side Wall Connector Flashing American Wood PLYRND3/4X23-3/4 Round Plywood
American Wood Plywood, Sanded Face, American Wood, 3/4 in Thickness, 2 ft Width, 4 ft Length, Pine, Grade BC Clear Polycarbonate wall connector flashing used to flash a Suntuf Polycarbonate panel which meets a wall along its horizontal or short edge. Flashing is flexible, easy to cut and work with and can be bent to fit a variety of roof pitches for easy installation. 4'L x 8"W. American Wood Plywood, Round, 3/4 in Thickness, 23-3/4 in Width
American Wood WM937-7 Stop American Wood WM847-7 Ranch Stop Stanley 127506 Light Duty Strap Hinge
American Wood Colonial Stop, 1-3/8 in Width, 84 in Length, 1/16 in Thickness, Wood American Wood Ranch Stop, 1-3/8 in Width, 84 in Length, 7/16 in Thickness, Wood Offset screw holes for extra strength and to prevent wood from splitting. Tight pin for left or right hand applications. Steel with aluminum pin. Safe working load: 18 lbs. Boxed loose.