Home > HARDWARE > CONSTRUCTION HARDWARE > LUMBER / MOLDING/TRIM > CORNER PROTECTORS
Choose a sub category:
TREATED WOOD TRIM WOOD MOLDINGS WOOD MOLDING TRIM PIECES
PVC MOLDINGS MISC. SIDING MOUNTING BLOCKS
CORNER PROTECTORS CABINET MOLDING / TRIM EDGE BANDING
HIDE-AWAY IRONING BOARDS WOOD LAMINATE DIMENSIONAL LUMBER
TREATED LUMBER PLYWOOD PLASTIC PANELS & ACCESSORIES
CRAFT WOOD BACKSPLASH PANELS & TRIM
Sort By:
1
National Hardware MPB512P Fixed Hinge Pin HINGE STRAP ZINC PLATED 3IN   Marine Ornamental Tiffany Fancy Post Cap
STRAP HINGES 3IN ZN PLT
Our Price: $2.03
National Hardware Hinge Pin, Fixed, Series: MPB512P, Suitable For Use With: 512P Hinges, 3-1/2 in Length, Steel, Satin Brass, Wall Mount Offset screw holes for extra strength and to prevent wood from splitting. Tight pin for left or right hand applications. Steel with aluminum pin. Safe working load: 18 lbs. Boxed loose. Appearance grade, southern yellow pine. MCA treatment, above ground contact.
National Hardware MPB512P Removable Hinge Pin American Wood PCOM-144 Common Board Waddell OBTB32 Out Base Corner Block
National Hardware Hinge Pin, Removable, Series: MPB512P, Suitable For Use With: 512P Hinges, 4 in Length, Steel, Satin Brass, Wall Mount American Wood Common Board, 1 in Thickness, 4 in Width, 4 ft Length, Pine No mitering decorative blocks. Installs with a hammer and finishing nails. Pine wood.
Waddell IBTB52 Inside Base Corner Waddell IBTB32 Inside Base Corner Waddell OBTB52 Out Base Corner Block
No mitering decorative blocks. Installs with a hammer and finishing nails. Pine wood. No mitering decorative blocks. Installs with a hammer and finishing nails. Pine wood. No mitering decorative blocks. Installs with a hammer and finishing nails. Pine wood.
HINGE STRAP STEEL LD 2IN ZINC HINGE STRAP ZINC PLATED 5IN   HINGE STRAP ZINC PLATED 6IN
STRAP HINGES 5IN ZN PLT
Our Price: $3.20
STRAP HINGES 6IN ZN PLT
Our Price: $3.71
Use in both the interior and exterior. Screws included. Offset screw holes for extra strength and to prevent wood from splitting. Tight pin for left or right hand applications. Steel with aluminum pin. Safe working load: 18 lbs. Boxed loose. Offset screw holes for extra strength and to prevent wood from splitting. Tight pin for left or right hand applications. Steel with aluminum pin. Safe working load: 18 lbs. Boxed loose.
American Wood PCLR1X2-6 4-Sided Sanded Common Board Waddell RTB35M Rosette Trim Block Waddell RTB35 Beveled Edge Rosette Trim Block
Sanded on 4 sides. No mitering decorative blocks. Installs with a hammer and finishing nails. Pine wood. No mitering decorative blocks. Installs with a hammer and finishing nails. Pine wood.
Waddell RTB25 Beveled Edge Rosette Trim Block HINGE STRAP STEEL LD 3IN ZINC National Hardware 282BC Flush/Full Inset Strap Hinge
STRAP HINGES 4IN ZN PLT
Our Price: $4.15
No mitering decorative blocks. Installs with a hammer and finishing nails. Pine wood. Use in both the interior and exterior. Screws included. National Hardware Strap Hinge, Flush/Full Inset, Heavy Duty, Series: 282BC, 0.28 in Hole Diameter, 0.08 in Leaf Thickness, 4 in Door Leaf Length, 1.61 in Door Leaf Width, 4 in Frame Leaf Length, 1.61 in Frame Leaf Width, 0.22 in Diameter Pin, Wall Mounting, 60 lb Load Capacity, 8 in Overall Width, Hot Rolled Steel, Zinc Plated, BHMA A138.18
National Hardware V280 Flush/Full Inset Light Strap Hinge National Hardware 282BC Flush/Full Inset Strap Hinge Marine Ornamental Tiffany Acorn Post Top
STRAP HINGES 2IN ZN PLT
Our Price: $4.41
STRAP HINGES 5IN ZN PLT
Our Price: $4.41
National Hardware Light Strap Hinge, Flush/Full Inset, Series: V280, 6 Holes, 0.05 in Leaf Thickness, 1-1/16 in Door Leaf Length, 2 in Door Leaf Width, 1-1/16 in Frame Leaf Length, 2 in Frame Leaf Width, Fixed Pin, 0.119 in Diameter Pin, Aluminum Pin, Wall Mounting, 18 lb Load Capacity, 3-3/4 in Overall Length, 1-1/16 in Overall Width, Zinc Plated National Hardware Strap Hinge, Flush/Full Inset, Heavy Duty, Series: 282BC, 0.09 in Leaf Thickness, 5 in Door Leaf Length, 1.85 in Door Leaf Width, 5 in Frame Leaf Length, 1.85 in Frame Leaf Width, 0.27 in Diameter Pin, Wall Mounting, 70 lb Load Capacity, 9.54 in Overall Width, Hot Rolled Steel, Zinc Plated, BHMA A138.18 Appearance grade, white pine. MCA treatment, above ground contact.
Marine Ornamental Tiffany Deluxe Octagon Post Top Marine Ornamental Tiffany Ball Post Top Marine Ornamental Tiffany Post Top
Appearance grade, white pine. MCA treatment, above ground contact. Appearance grade, white pine. MCA treatment, above ground contact.  Accommodates 4" x 4" post. Appearance grade, white pine. MCA treatment, above ground contact.
Marine Ornamental Tiffany Traditional Post Top Marine Ornamental Tiffany Post Top HINGE STRAP STEEL LD 2IN GALV
Appearance grade, white pine. MCA treatment, above ground contact. Appearance grade, white pine. MCA treatment, above ground contact. Use in both the interior and exterior. Screws included.
National Hardware V280 Flush/Full Inset Light Strap Hinge HINGE STRAP STEEL LD 3IN GALV National Hardware 282BC Flush/Full Inset Strap Hinge
STRAP HINGES 3IN ZN PLT
Our Price: $4.77
STRAP HINGES 6IN ZN PLT
Our Price: $5.08
National Hardware Light Strap Hinge, Flush/Full Inset, Series: V280, 6 Holes, 0.056 in Leaf Thickness, 1-3/16 in Door Leaf Length, 3 in Door Leaf Width, 1-3/16 in Frame Leaf Length, 3 in Frame Leaf Width, Fixed Pin, 0.17 in Diameter Pin, Aluminum Pin, Wall Mounting, 5-11/16 in Overall Length, 1-3/16 in Overall Width, Hot Rolled Steel, Zinc Plated Use in both the interior and exterior. Screws included. National Hardware Strap Hinge, Flush/Full Inset, Heavy Duty, Series: 282BC, 0.1 in Leaf Thickness, 6 in Door Leaf Length, 2.43 in Door Leaf Width, 6 in Frame Leaf Length, 2.43 in Frame Leaf Width, 0.32 in Diameter Pin, Wall Mounting, 85 lb Load Capacity, 11.47 in Overall Width, Hot Rolled Steel, Zinc Plated, BHMA A138.18
Waddell BTB25 Base Block HINGE STRAP STEEL LD 4IN ZINC American Wood PCLR1X3-6 4-Sided Sanded Common Board
No mitering decorative blocks. Installs with a hammer and finishing nails. Pine wood. Use in both the interior and exterior. Screws included. Sanded on 4 sides.
American Wood PCOM-184 Common Board Waddell BTB35 Base Block Marine Ornamental Tiffany Pineapple Post Top
American Wood Common Board, 1 in Thickness, 8 in Width, 4 ft Length, Pine No mitering decorative blocks. Installs with a hammer and finishing nails. Pine wood. Appearance grade, white pine. MCA treatment, above ground contact.
American Wood PLCR1X4-6 4-Sided Sanded Common Board American Wood PLCR1X3-4 4-Sided Sanded Common Board HINGE STRAP STEEL LD 6IN ZINC
Sanded on 4 sides. Sanded on 4 sides. Use in both the interior and exterior. Screws included.
Stanley N128-249 Strap Hinge National Hardware V280 Flush/Full Inset Light Strap Hinge National Hardware N265-355 Flush/Full Inset Continuous Hinge
STRAP HINGES 4IN GALV
Our Price: $6.70
STRAP HINGES 4IN ZN PLT
Our Price: $6.70
National Strap Hinge, Heavy Duty, Series: N128-249, Suitable For Use With: Barn, Shed Doors, Storage Bins, Tool Boxes and Gates, 3 Holes, 4 in Door Leaf, 1.61 in Door Leaf, Tight Pin, Brass Pin, Screw Mounting, Fasteners: NO 7 Screw, Steel, Galvanized National Hardware Light Strap Hinge, Flush/Full Inset, Series: V280, 6 Holes, 0.056 in Leaf Thickness, 1-1/4 in Door Leaf Length, 4 in Door Leaf Width, 1-1/4 in Frame Leaf Length, 4 in Frame Leaf Width, Fixed Pin, 0.195 in Diameter Pin, Aluminum Pin, Wall Mounting, 8 lb Load Capacity, 7-11/16 in Overall Length, 1-1/4 in Overall Width, Zinc Plated National Hardware Continuous Hinge, Flush/Full Inset, Series: V570, 12 in Door Leaf Length, 12 in Frame Leaf Length, Friction, Removable Pin, 0.9 in Diameter Pin, Steel Pin, Surface Mounting, Fasteners: NO 4 X 1/2 in Screw, 1-1/16 in Overall Width, Cold Rolled Steel, Brass, For Residential Applications
National Hardware N265-371 Flush/Full Inset Continuous Hinge Waddell RTB35OAK Rosette Trim Block National Hardware 282BC Flush/Full Inset Strap Hinge
STRAP HINGES 8IN ZN PLT
Our Price: $7.18
National Hardware Continuous Hinge, Flush/Full Inset, Series: V570, 12 in Door Leaf Length, 12 in Frame Leaf Length, Friction, Removable Pin, 0.9 in Diameter Pin, Steel Pin, Surface Mounting, Fasteners: NO 4 X 1/2 in Screw, 1-1/16 in Overall Width, Cold Rolled Steel, Nickel Plated, For Residential Applications No mitering decorative blocks. Installs with a hammer and finishing nails. Oak wood. National Hardware Strap Hinge, Flush/Full Inset, Heavy Duty, Series: 282BC, 0.11 in Leaf Thickness, 8 in Door Leaf Length, 3.08 in Door Leaf Width, 8 in Frame Leaf Length, 3.08 in Frame Leaf Width, 0.39 in Diameter Pin, Wall Mounting, 15.39 in Overall Width, Hot Rolled Steel, Zinc Plated, BHMA A138.18, For Residential Applications
American Wood STUD2X4X6 Stud Grade Wood Molding HINGE STRAP STEEL LD 4IN GALV American Wood 2X3X8 Stud Grade Wood Molding
American Wood Wood Molding, Stud Grade, 2 in Thickness, 4 in Width, 6 ft Length Use in both the interior and exterior. Screws included. American Wood Wood Molding, Stud Grade, 2 in Thickness, 3 in Width, 8 ft Length
National Hardware N265-363 Flush/Full Inset Continuous Hinge National Hardware N265-389 Flush/Full Inset Continuous Hinge Waddell ICTB31 Inside Crown Corner Block
National Hardware Continuous Hinge, Flush/Full Inset, Series: V570, 12 in Door Leaf Length, 12 in Frame Leaf Length, Friction, Removable Pin, 0.9 in Diameter Pin, Steel Pin, Surface Mounting, Fasteners: NO 4 X 1/2 in Screw, 1-1/2 in Overall Width, Cold Rolled Steel, Brass, For Residential Applications National Hardware Continuous Hinge, Flush/Full Inset, Series: V570, 12 in Door Leaf Length, 12 in Frame Leaf Length, Friction, Removable Pin, 0.9 in Diameter Pin, Steel Pin, Surface Mounting, Fasteners: NO 4 X 1/2 in Screw, 1-1/2 in Overall Width, Cold Rolled Steel, Nickel Plated, For Residential Applications No mitering decorative blocks. Installs with a hammer and finishing nails. Pine wood.
Marine Ornamental Tiffany Fancy Post Cap American Wood 309532 Stud Grade Wood Molding Waddell 212 Ball Post Top
Selected for appearance, Grade, southern yellow pine MCA treatment, above ground contact. American Wood Wood Molding, Stud Grade, American Wood, 2 in Thickness, 4 in Width, 8 ft Length Pine treated with Osomose Weather Shield (inhibits checking and cracking).
National Hardware V280 Flush/Full Inset Light Strap Hinge American Wood WH-1X4X4 Hardwood Board American Wood PLCR1X4-4 4-Sided Sanded Common Board
STRAP HINGES 5IN ZN PLT
Our Price: $8.53
National Hardware Light Strap Hinge, Flush/Full Inset, Series: V280, 6 Holes, 0.072 in Leaf Thickness, 1-1/2 in Door Leaf Length, 5 in Door Leaf Width, 1-1/2 in Frame Leaf Length, 5 in Frame Leaf Width, Fixed Pin, 0.195 in Diameter Pin, Aluminum Pin, Wall Mounting, 9-5/8 in Overall Length, 1-1/2 in Overall Width, Hot Rolled Steel, Zinc Plated White hardwood boards. Sanded on 4 sides.
American Wood 309533 Common Board HINGE STRAP STEEL LD 6IN GALV Waddell BTB35OAK Base Block
American Wood Common Board, American Wood, 1 in Thickness, 4 in Width, 8 ft Length, Pine Use in both the interior and exterior. Riveted brass pin. 1.8mm thickness. No mitering decorative blocks. Installs with a hammer and finishing nails. Oak wood.
Waddell BTBC35 Center Base Block American Wood DEFENCE1X6T Dog Ear Board American Wood PLCR1X6-4 4-Sided Sanded Common Board
No mitering decorative blocks. Installs with a hammer and finishing nails. Pine wood. Tops are cut off at an angle. Sanded on 4 sides.
Waddell 110 Ball Post Top HINGE STRAP GALV 5IN          National Hardware N148-205 Flush/Full Inset Continuous Hinge
STRAP HINGES 5IN GALV
Our Price: $9.36
Pine treated with Osomose Weather Shield (inhibits checking and cracking). Offset screw holes for extra strength and to prevent wood from splitting. Tight pin for left or right hand applications. Manufactured with hot-rolled steel. National Hardware Continuous Hinge, Flush/Full Inset, Series: V570, 30 in Door Leaf Length, 30 in Frame Leaf Length, Friction, Removable Pin, 0.9 in Diameter Pin, Steel Pin, Surface Mounting, Fasteners: NO 4 X 1/2 in Screw, 1-1/16 in Overall Width, Cold Rolled Steel, Brass, For Residential Applications
National Hardware N148-221 Flush/Full Inset Continuous Hinge Mintcraft LSH-Z02-013L Light Duty Strap Hinge National Hardware V130 Flush/Full Inset Cafe Door Hinge
CAFE DOOR HINGES BRS
Our Price: $10.27
National Hardware Continuous Hinge, Flush/Full Inset, Series: V570, 30 in Door Leaf Length, 30 in Frame Leaf Length, Friction, Removable Pin, 0.9 in Diameter Pin, Steel Pin, Surface Mounting, Fasteners: NO 4 X 1/2 in Screw, 1-1/16 in Overall Width, Cold Rolled Steel, Nickel Plated, For Residential Applications Use in both the interior and exterior. Rust resistant. National Hardware Cafe Door Hinge, Flush/Full Inset, Series: V130, Removable Pin, Wall Mounting, 50 lb Load Capacity, Steel/Die Cast/Delrin, Brass, Includes: Removable ramps, 180 deg Opening, For Commercial/Industrial and Residential Applications
Stanley N128-322 Strap Hinge Marine Ornamental Tiffany Fancy Post Cap National Hardware N148-171 Flush/Full Inset Continuous Hinge
STRAP HINGES 6IN GALV
Our Price: $10.61
National Strap Hinge, Heavy Duty, Series: N128-322, Suitable For Use With: Barn, Shed Doors, Storage Bins, Tool Boxes and Gates, 4 Holes, 6 in Door Leaf, 2.43 in Door Leaf, Tight Pin, Brass Pin, Screw Mounting, Fasteners: NO 9 Screw, Steel, Galvanized Selected for appearance, Grade, southern yellow pine MCA treatment, above ground contact. National Hardware Continuous Hinge, Flush/Full Inset, Series: V570, 30 in Door Leaf Length, 30 in Frame Leaf Length, Friction, Removable Pin, 0.9 in Diameter Pin, Steel Pin, Surface Mounting, Fasteners: NO 4 X 1/2 in Screw, 1-1/2 in Overall Width, Cold Rolled Steel, Nickel Plated, For Residential Applications
National Hardware N148-155 Flush/Full Inset Continuous Hinge HINGE STRAP STEEL HD 4IN ZINC HINGE GRAVITY PIVOT SAT BRS
CONT HINGE 1-1/2X30IN BRS
Our Price: $10.98
National Hardware Continuous Hinge, Flush/Full Inset, Series: V570, 30 in Door Leaf Length, 30 in Frame Leaf Length, Friction, Removable Pin, 0.9 in Diameter Pin, Steel Pin, Surface Mounting, Fasteners: NO 4 X 1/2 in Screw, 1-1/2 in Overall Width, Cold Rolled Steel, Brass, For Residential Applications Ideal for doors, gates, sheds and toolboxes. Screws included. Designed for lightweight louvered and cafe doors that are 3/4" to 1-3/8" thick.  Automatically returns the door to the center opening. Holds door open at 90 degrees on either side of opening.
American Wood 2X6X8 Stud Grade Wood Molding HINGE STRAP STL HD 4IN BLACK  American Wood PLCR1X8-4 4-Sided Sanded Common Board
American Wood Wood Molding, Stud Grade, 2 in Thickness, 6 in Width, 8 ft Length Ideal for doors, gates, sheds and toolboxes. Screws included. Sanded on 4 sides.
Thunderbird Forest 309534 Common Board Universal Forest 106049 Double V-Groove Deck Post American Wood STUD2X4X8T Stud Grade Wood Molding
Alexandria Moulding Common Board, 1 in Thickness, 6 in Width, 8 ft Length, Pine, For Shelving and Household Projects Appearance grade, wane free southern yellow pine. MCA treatment, above ground contact. American Wood Wood Molding, Stud Grade, 2 in Thickness, 4 in Width, 8 ft Length, Press Treated
American Wood PCLR1X6-6 4-Sided Sanded Common Board American Wood OAK-1X4X4 Common Board HINGE STRAP STL HD 6IN BLACK
Sanded on 4 sides. American Wood Common Board, 1 in Thickness, 4 in Width, 4 ft Length, Oak Ideal for doors, gates, sheds and toolboxes. Screws included.
National Hardware 282BC Flush/Full Inset Strap Hinge HINGE CONT BRT BRASS 1-1/2X30 BOARD HARDWOOD WHT 1X6INX4FT
STRAP HINGES 10IN ZN PLT
Our Price: $12.63
National Hardware Strap Hinge, Flush/Full Inset, Heavy Duty, Series: 282BC, 0.36 in Hole Diameter, 0.14 in Leaf Thickness, 10 in Door Leaf Length, 3.68 in Door Leaf Width, 10 in Frame Leaf Length, 3.68 in Frame Leaf Width, 0.44 in Diameter Pin, Wall Mounting, 20 in Overall Width, Hot Rolled Steel, Zinc Plated, BHMA A138.18 Medium gauge construction for use on lids, table leaves and cabinet doors. White hardwood boards.
Mintcraft LSH-Z03-013L Light Duty Strap Hinge HINGE CONT BRT NICKEL 1-1/2X30 National Hardware N148-353 Flush/Full Inset Continuous Hinge
Use in both the interior and exterior. Rust resistant. Medium gauge construction for use on lids, table leaves and cabinet doors. National Hardware Continuous Hinge, Flush/Full Inset, Series: V570, 48 in Door Leaf Length, 48 in Frame Leaf Length, Friction, Removable Pin, 0.9 in Diameter Pin, Steel Pin, Surface Mounting, Fasteners: NO 4 X 1/2 in Screw, 1-1/16 in Overall Width, Cold Rolled Steel, Brass, For Residential Applications
National Hardware N148-379 Flush/Full Inset Continuous Hinge Waddell ICTB52 Inside Crown Corner Block National Hardware N148-254 Flush/Full Inset Continuous Hinge
National Hardware Continuous Hinge, Flush/Full Inset, Series: V570, 48 in Door Leaf Length, 48 in Frame Leaf Length, Friction, Removable Pin, 0.9 in Diameter Pin, Steel Pin, Surface Mounting, Fasteners: NO 4 X 1/2 in Screw, 1-1/16 in Overall Width, Cold Rolled Steel, Nickel Plated, For Residential Applications No mitering decorative blocks. Installs with a hammer and finishing nails. Pine wood. National Hardware Continuous Hinge, Flush/Full Inset, Series: V570, 30 in Door Leaf Length, 30 in Frame Leaf Length, Friction, Removable Pin, 0.9 in Diameter Pin, Steel Pin, Surface Mounting, Fasteners: NO 4 X 1/2 in Screw, 2 in Overall Width, Cold Rolled Steel, Brass, For Residential Applications
National Hardware N148-270 Flush/Full Inset Continuous Hinge American Wood PLCR1X8-6 4-Sided Sanded Common Board National Hardware N148-304 Flush/Full Inset Continuous Hinge
CONT HINGE 1-1/2X48IN BRS
Our Price: $15.00
National Hardware Continuous Hinge, Flush/Full Inset, Series: V570, 30 in Door Leaf Length, 30 in Frame Leaf Length, Friction, Removable Pin, 0.9 in Diameter Pin, Steel Pin, Surface Mounting, Fasteners: NO 4 X 1/2 in Screw, 2 in Overall Width, Cold Rolled Steel, Nickel Plated, For Residential Applications Sanded on 4 sides. National Hardware Continuous Hinge, Flush/Full Inset, Series: V570, 48 in Door Leaf Length, 48 in Frame Leaf Length, Friction, Removable Pin, 0.9 in Diameter Pin, Steel Pin, Surface Mounting, Fasteners: NO 4 X 1/2 in Screw, 1-1/2 in Overall Width, Cold Rolled Steel, Brass, For Residential Applications
National Hardware N148-320 Flush/Full Inset Continuous Hinge HINGE STRAP GALV 8IN          Universal Forest 106108 Turned Deck Post with Ball Top
STRAP HINGES 8IN GALV
Our Price: $15.32
National Hardware Continuous Hinge, Flush/Full Inset, Series: V570, 48 in Door Leaf Length, 48 in Frame Leaf Length, Friction, Removable Pin, 0.9 in Diameter Pin, Steel Pin, Surface Mounting, Fasteners: NO 4 X 1/2 in Screw, 1-1/2 in Overall Width, Cold Rolled Steel, Nickel Plated, For Residential Applications Offset screw holes for extra strength and to prevent wood from splitting. Tight pin for left or right hand applications. Manufactured with hot-rolled steel. Selected for appearance, grade #1 southern yellow pine. MCA treatment, above ground contact.
HINGE STRAP STEEL EX-HD 5IN SS American Wood PCOM-188 Common Board STAIR STRINGER 3-STEP 39IN
Ideal for doors, gates, sheds and toolboxes. Screws included. American Wood Common Board, 1 in Thickness, 8 in Width, 8 ft Length, Pine, 309535 Southern yellow pine, grade #1. MCA treatment, ground contact. Can be trimmed for intermedia. 6-3/4" Rise x 10" Run. Made from 2 x 12's.
National Hardware V571 Flush/Full Inset Continuous Hinge National Hardware V281 Flush/Full Inset Strap Hinge HINGE STRAP STEEL EX-HD 6IN SS
STRAP HINGES 6IN SS
Our Price: $16.84
National Hardware Continuous Hinge, Flush/Full Inset, Series: V571, 12 in Door Leaf Length, 12 in Frame Leaf Length, Removable Pin, Surface, Wall Mounting, 1-1/2 in Overall Width, Stainless Steel, Stainless Steel, BHMA A138.18, For Commercial/Industrial and Residential Applications National Hardware Strap Hinge, Flush/Full Inset, Heavy Duty, Series: V281, 6 in Door Leaf Length, 6 in Frame Leaf Length, Fixed Pin, Wall Mounting, Stainless Steel, Stainless Steel, BHMA A138.18, For Commercial/Industrial and Residential Applications Ideal for doors, gates, sheds and toolboxes. Screws included.
Stanley 127357 Light Duty Strap Hinge HINGE STRAP STEEL EX-HD 4IN SS National Hardware N148-510 Flush/Full Inset Continuous Hinge
Offset screw holes for extra strength and to prevent wood from splitting. Tight pin for left or right hand applications. Steel with aluminum pin. Safe working load: 18 lbs. Boxed loose. Ideal for doors, gates, sheds and toolboxes. Screws included. National Hardware Continuous Hinge, Flush/Full Inset, Series: V570, 72 in Door Leaf Length, 72 in Frame Leaf Length, Friction, Removable Pin, 0.9 in Diameter Pin, Steel Pin, Surface Mounting, Fasteners: NO 4 X 1/2 in Screw, 1-1/16 in Overall Width, Cold Rolled Steel, Brass, For Residential Applications
National Hardware N148-536 Flush/Full Inset Continuous Hinge HINGE CONT BRT NICKEL 1-1/2X72 Maccourt W4419 Elongated Window Well Cover
National Hardware Continuous Hinge, Flush/Full Inset, Series: V570, 72 in Door Leaf Length, 72 in Frame Leaf Length, Friction, Removable Pin, 0.9 in Diameter Pin, Steel Pin, Surface Mounting, Fasteners: NO 4 X 1/2 in Screw, 1-1/16 in Overall Width, Cold Rolled Steel, Nickel Plated, For Residential Applications Medium gauge construction for use on lids, table leaves and cabinet doors. Fits over window wells of 40" or less in length projecting 16" or less from house. Improves basement insulation. Keeps out rain, snow and debris. Made of durable, impact-resistant plastic. One size fits both circular and rectangular configurations.
Maccourt Low Profile Window Well Cover HINGE CONT BRT BRASS 1-1/2X48 HINGE STRAP STEEL HD 6IN GALV
Custom low profile design made of durable, impact-resistant plastic. Improves basement insulation. Easy snap-clamp installation. Keeps out rain, snow and debris. Medium gauge construction for use on lids, table leaves and cabinet doors. Ideal for doors, gates, sheds and toolboxes. Screws included.
American Wood PLCR1X12-4 4-Sided Sanded Common Board National Hardware N148-460 Flush/Full Inset Continuous Hinge National Hardware N148-486 Flush/Full Inset Continuous Hinge
CONT HINGE 1-1/2X72IN BRS
Our Price: $20.51
Sanded on 4 sides. National Hardware Continuous Hinge, Flush/Full Inset, Series: V570, 72 in Door Leaf Length, 72 in Frame Leaf Length, Friction, Removable Pin, 0.9 in Diameter Pin, Steel Pin, Surface Mounting, Fasteners: NO 4 X 1/2 in Screw, 1-1/2 in Overall Width, Cold Rolled Steel, Brass, For Residential Applications National Hardware Continuous Hinge, Flush/Full Inset, Series: V570, 72 in Door Leaf Length, 72 in Frame Leaf Length, Friction, Removable Pin, 0.9 in Diameter Pin, Steel Pin, Surface Mounting, Fasteners: NO 4 X 1/2 in Screw, 1-1/2 in Overall Width, Cold Rolled Steel, Nickel Plated, For Residential Applications
Mintcraft LSH-Z04-013L Light Duty Strap Hinge HINGE CONT BRT NICKEL 1-1/2X48 Band-It 12410 Veneer Facing
Use in both the interior and exterior. Rust resistant. Medium gauge construction for use on lids, table leaves and cabinet doors. Pre-sanded and ready to finish, backed with a resin impregnated paper that prevents splitting. Apply to wood, plywood, particle board, hardboard, even metal. Apply with contact cement.
Band-It 12450 Birch Facing National Hardware N148-403 Flush/Full Inset Continuous Hinge National Hardware N148-429 Flush/Full Inset Continuous Hinge
Pre-sanded and ready to finish, backed with a resin impregnated paper that prevents splitting. Apply to wood, plywood, particle board, hardboard, even metal. Apply with contact cement. National Hardware Continuous Hinge, Flush/Full Inset, Series: V570, 48 in Door Leaf Length, 48 in Frame Leaf Length, Friction, Removable Pin, 0.9 in Diameter Pin, Steel Pin, Surface Mounting, Fasteners: NO 4 X 1/2 in Screw, 2 in Overall Width, Cold Rolled Steel, Brass, For Residential Applications National Hardware Continuous Hinge, Flush/Full Inset, Series: V570, 48 in Door Leaf Length, 48 in Frame Leaf Length, Friction, Removable Pin, 0.9 in Diameter Pin, Steel Pin, Surface Mounting, Fasteners: NO 4 X 1/2 in Screw, 2 in Overall Width, Cold Rolled Steel, Nickel Plated, For Residential Applications
STAIR STRINGER 4-STEP 47.5IN  National Hardware V571 Flush/Full Inset Continuous Hinge HINGE STRAP ZINC PLATED 12IN
STRAP HINGES 12IN ZN PLT
Our Price: $22.66
Southern yellow pine, grade #1. MCA treatment, ground contact. Can be trimmed for intermedia. 6-3/4" Rise x 10" Run. Made from 2 x 12's. National Hardware Continuous Hinge, Flush/Full Inset, Series: V571, 30 in Door Leaf Length, 30 in Frame Leaf Length, Removable Pin, Surface, Wall Mounting, 1-1/2 in Overall Width, Stainless Steel, Stainless Steel, BHMA A138.18, For Commercial/Industrial and Residential Applications National Strap Hinge, Heavy Duty, Wall Mounting, 12 in Overall Length, 12 ga Steel, Zinc-Plated, For Home, Farm, Builder or Industrial Customers
Universal Forest 106035 Square End Deck Baluster Stanley 127506 Light Duty Strap Hinge American Wood PCOM-1128 Common Board
Southern yellow pine, wane free appearance grade. MCA treatment, above ground contact. Offset screw holes for extra strength and to prevent wood from splitting. Tight pin for left or right hand applications. Steel with aluminum pin. Safe working load: 18 lbs. Boxed loose. American Wood Common Board, 1 in Thickness, 12 in Width, 8 ft Length, Pine, 309536
Waddell OCTB31 Outside Crown Corner Block American Wood OAK-1X8X4 Common Board HINGE CONT BRT BRASS 1-1/2X72
No mitering decorative blocks. Installs with a hammer and finishing nails. Pine wood. American Wood Common Board, 1 in Thickness, 8 in Width, 4 ft Length, Oak Medium gauge construction for use on lids, table leaves and cabinet doors.
STAIR STRINGER 5-STEP 59.5IN  National Hardware N148-569 Flush/Full Inset Continuous Hinge National Hardware N148-585 Flush/Full Inset Continuous Hinge
Southern yellow pine, grade #1. MCA treatment, ground contact. Can be trimmed for intermedia. 6-3/4" Rise x 10" Run. Made from 2 x 12's. National Hardware Continuous Hinge, Flush/Full Inset, Series: V570, 72 in Door Leaf Length, 72 in Frame Leaf Length, Friction, Removable Pin, 0.9 in Diameter Pin, Steel Pin, Surface Mounting, Fasteners: NO 4 X 1/2 in Screw, 2 in Overall Width, Cold Rolled Steel, Brass, For Residential Applications National Hardware Continuous Hinge, Flush/Full Inset, Series: V570, 72 in Door Leaf Length, 72 in Frame Leaf Length, Friction, Removable Pin, 0.9 in Diameter Pin, Steel Pin, Surface Mounting, Fasteners: NO 4 X 1/2 in Screw, 2 in Overall Width, Cold Rolled Steel, Nickel Plated, For Residential Applications
Universal Forest 106030 Square End Deck Baluster Universal Forest 106031 Square End Deck Baluster HINGE STRAP STEEL HD 8IN GALV
Appearance grade, wane free southern yellow pine. MCA treatment, above ground contact. Appearance grade, wane free southern yellow pine. MCA treatment, above ground contact. Ideal for doors, gates, sheds and toolboxes. Screws included.
Waddell OCTB52 Outside Crown Corner Block Mintcraft LSH-Z06-013L Light Duty Strap Hinge Mintcraft HSH-Z04-013L Strap Hinge
No mitering decorative blocks. Installs with a hammer and finishing nails. Pine wood. Use in both the interior and exterior. Rust resistant. Reinforces doors, gates and sheds.
Mintcraft HSH-Z08-013L Strap Hinge Universal Forest 106034 Classic Spindle American Wood 309572 Stud Grade Wood Molding
Reinforces doors, gates and sheds. Appearance grade, wane free southern yellow pine. MCA treatment, above ground contact. American Wood Wood Molding, Stud Grade, American Wood, 2 in Thickness, 2 in Width, 8 ft Length
Mintcraft HSH-Z05-013L Strap Hinge Waddell 116 Plate Post Top Amerimax 75260 Area Wall Cover
Reinforces doors, gates and sheds. Pine treated with Osomose Weather Shield (inhibits checking and cracking). Fits plastic and metal area walls with a width of 37" and a projection of 16". Load bearing-holds over 500 lbs. Easy to install. Fits Window Wells No.75204 (sku 901.7187), 75208 (sku 001.0561) and 75210 (sku 303.0913). 18" x 18" x 42".
Universal Forest 106048 Deluxe Handrail Mintcraft HSH-Z06-013L Strap Hinge American Wood 309570 Furring Strip
Southern yellow pine, wane free appearance grade. MCA treatment, above ground contact. Reinforces doors, gates and sheds. American Wood Furring Strip, American Wood, 1 in Thickness, 2 in Width, 8 ft Length
Universal Forest 106033 Classic Spindle Prime Line U 9129 Nail-On Corner Shield Prime Line U 9130 Nail-On Corner Shield
Appearance grade, wane free southern yellow pine. MCA treatment, above ground contact. Extruded vinyl shield used for protecting or repairing wall corners from chipped paint, torn wallpaper or fingerprints. Includes 1 piece and 1 set of drive nails. .045 wall thickness. Pre-drilled vinyl shield with countersunk holes used for protecting or repairing wall corners from chipped paint, torn wallpaper or fingerprints. Includes 1 piece and 1 set of number 6 x 1" Phillips oval head sheet metal screws. .060 wall thickness.
CONTINUOUS HINGE 1-1/2X48IN SS Prime Line U 10081 Corner Shield Mintcraft HSH-Z10-013L Strap Hinge
Friction type pin will not fall out. Surface mount for easy installation. Manufactured from stainless steel with stainless steel pin for corrosion resistance. Can be cut to desired length. Extruded vinyl shield used for protecting or repairing wall corners from chipped paint, torn wallpaper or fingerprints. Includes 1 piece with an adhesive back. .045 wall thickness. Reinforces doors, gates and sheds.
American Wood FUR1X3X8 Furring Strip CONTINUOUS HINGE 1-1/2X72IN SS Waddell 114 Victorian Post Top
American Wood Furring Strip, 1 in Thickness, 3 in Width, 8 ft Length, 309571 Friction type pin will not fall out. Surface mount for easy installation. Manufactured from stainless steel with stainless steel pin for corrosion resistance. Can be cut to desired length. Pine treated with Osomose Weather Shield (inhibits checking and cracking).
Waddell 112 Post Top Mintcraft HSH-Z12-013L Strap Hinge Maccourt W4214 Elongated Type H Window Well Cover
Pine treated with Osomose Weather Shield (inhibits checking and cracking). Reinforces doors, gates and sheds. Manufactured from impact resistant plastic. Improves basement insulation. Keeps out rain, snow, and debris.
Prime Line U 10082 Nail-On Corner Shield Prime Line U 10083 Corner Shield Maccourt Window Well Cover
Extruded vinyl shield used for protecting or repairing wall corners from chipped paint, torn wallpaper or fingerprints. Includes 1 piece and 1 set of drive nails. .045 wall thickness. Extruded vinyl shield used for protecting or repairing wall corners from chipped paint, torn wallpaper or fingerprints. Includes 1 piece with an adhesive back. .045 wall thickness. Fits over window wells of 40" or less in length projecting 16" or less from house. Improves basement insulation. Keeps out rain, snow and debris. Made of durable, impact-resistant plastic. One size fits both circular and rectangular configurations.
Waddell FCS27 Reversible Door Casing Set Waddell FCS37 Reversible Door Casing Set Prime Line U 10075 Nail-On Corner Shield
Contains two rosettes, two base trim blocks, two 84" fluted casings, and one 36" fluted casing header. Pine wood. Contains two rosettes, two base trim blocks, two 84" fluted casings, and one 36" fluted casing header. Pine wood. Pre-drilled vinyl shield with countersunk holes used for protecting or repairing wall corners from chipped paint, torn wallpaper or fingerprints. Includes 1 piece and 1 set of number 6 x 1" Phillips oval head sheet metal screws. .060 wall thickness.
Hide Away Supreme SUP400 Iron Board Hide Away Supreme SUP420 Iron Board
Recessed, with swivel ironing board. Raised panel unfinished oak door. Includes shelf, garment hook, installation hardware and heat shield for safe iron storage. Opening size: 14-1/4" x 46-1/4" x 3-1/2". Outside dimensions: 16" x 47-3/4" x 7". Scratch resistant, recessed, with swivel ironing board. Raised panel door finished in white. Includes garment hook, installation hardware, and heat shield for safe iron storage. Sleeve board not available. Opening size: 14-1/4" x 46-1/4" x 3-1/2". Outside dimensions: 16" x 47-3/4" x 7".
   
 
1