Home > HARDWARE > CONSTRUCTION HARDWARE > FOUNDATION HARDWARE > ADHESIVE ANCHORING
Sort By:
1
Stanley 221101 Eye Bolt SCREW EYE SMALL STL 5/32X5/8IN SCREW EYE LRG 3/8X1-3/16IN
For use in exterior and interior applications. Hex nut included. Sharp screw point bites into wood. Sharp screw point bites into wood. For use in exterior and interior applications. Rust resistant zinc plated steel. For both interior and exterior use.  Rust resistant.  3/8"x1-3/16.
SCREW EYE MED 1/4X15/16IN     Hillman 50705 Screw Eye SCREW EYE SM 5/32X13/16IN ZINC
Sharp screw point bites into wood. Sharp screw point bites into wood. Sharp screw point bites into wood.
SCREW EYE SM 3/16X1-3/16 ZINC SCREW EYE SM 5/32X5/8IN ZINC  SCREW EYE LRG STL 13/32X1-3/8
Sharp screw point bites into wood. Sharp screw point bites into wood. Sharp screw point bites into wood.
National Hardware V2014 Large Screw Eye 2-3/16 in National Hardware V2014 Large Screw Eye 2-5/8 in SCREW EYE MED 25/64X1-9/16IN
National Hardware Screw Eye, Large, Series: V2014, 2-3/16 in Overall Length, 0.94 in Thread Length, 0.22 in Eye Inside Diameter, 0.61 in Eye Outside Diameter, 64 lb, Steel, Zinc Plated, BHMA A138.18, NO 4 Trade, For Indoor/Outdoor Applications National Hardware Screw Eye, Large, Series: V2014, 2-5/8 in Overall Length, 1.12 in Thread Length, 0.26 in Eye Inside Diameter, 0.72 in Eye Outside Diameter, 115 lb, Steel, Zinc Plated, BHMA A138.18, NO 2 Trade, For Indoor/Outdoor Applications Sharp screw point bites into wood.
National Hardware V2010 Small Screw Eye 1-15/16 in National Hardware V2010 Small Screw Eye 1-5/8 in National Hardware V2010 Small Screw Eye 1-3/8 in
National Hardware Screw Eye, Small, Series: V2010, 1-15/16 in Overall Length, 0.94 in Thread Length, 0.22 in Eye Inside Diameter, 0.31 in Eye Outside Diameter, 95 lb, Steel, Zinc Plated, BHMA A138.18, NO 204 Trade, For Indoor/Outdoor Applications National Hardware Screw Eye, Small, Series: V2010, 1-5/8 in Overall Length, 3/4 in Thread Length, 0.19 in Eye Inside Diameter, 0.26 in Eye Outside Diameter, 75 lb, Steel, Zinc Plated, BHMA A138.18, NO 206 Trade, For Indoor/Outdoor Applications National Hardware Screw Eye, Small, Series: V2010, 1-3/8 in Overall Length, 0.6 in Thread Length, 0.16 in Eye Inside Diameter, 0.23 in Eye Outside Diameter, 50 lb, Steel, Zinc Plated, BHMA A138.18, NO 208 Trade, For Indoor/Outdoor Applications
National Hardware V2010 Small Screw Eye 3/4 in National Hardware V2010 Small Screw Eye 5/8 in National Hardware V2010 Small Screw Eye 17/32 in
National Hardware Screw Eye, Small, Series: V2010, 3/4 in Overall Length, 1/4 in Thread Length, 0.1 in Eye Inside Diameter, 0.19 in Eye Outside Diameter, 20 lb, Steel, Zinc Plated, BHMA A138.18, NO 212-1/2 Trade, For Indoor/Outdoor Applications National Hardware Screw Eye, Small, Series: V2010, 5/8 in Overall Length, 0.19 in Thread Length, 0.08 in Eye Inside Diameter, 0.16 in Eye Outside Diameter, 10 lb, Steel, Zinc Plated, BHMA A138.18, NO 214-1/2 Trade, For Indoor/Outdoor Applications National Hardware Screw Eye, Small, Series: V2010, 17/32 in Overall Length, 0.19 in Thread Length, 0.06 in Eye Inside Diameter, 0.14 in Eye Outside Diameter, 5 lb, Steel, Zinc Plated, BHMA A138.18, NO 216-1/2 Trade, For Indoor/Outdoor Applications
National Hardware V2010 Small Screw Eye 15/32 in National Hardware V2010 Small Screw Eye 1-3/16 in National Hardware V2010 Small Screw Eye 15/16 in
National Hardware Screw Eye, Small, Series: V2010, 15/32 in Overall Length, 0.16 in Thread Length, 0.05 in Eye Inside Diameter, 0.12 in Eye Outside Diameter, 5 lb, Steel, Zinc Plated, BHMA A138.18, NO 217-1/2 Trade, For Indoor/Outdoor Applications National Hardware Screw Eye, Small, Series: V2010, 1-3/16 in Overall Length, 0.56 in Thread Length, 0.14 in Eye Inside Diameter, 0.22 in Eye Outside Diameter, 35 lb, Steel, Zinc Plated, BHMA A138.18, NO 210 Trade, For Indoor/Outdoor Applications National Hardware Screw Eye, Small, Series: V2010, 15/16 in Overall Length, 0.44 in Thread Length, 0.1 in Eye Inside Diameter, 0.19 in Eye Outside Diameter, 20 lb, Steel, Zinc Plated, BHMA A138.18, NO 212 Trade, For Indoor/Outdoor Applications
National Hardware V2010 Small Screw Eye 13/16 in National Hardware V2010 Small Screw Eye 11/16 in National Hardware V2012 Medium Screw Eye 2-1/16 in
National Hardware Screw Eye, Small, Series: V2010, 13/16 in Overall Length, 0.31 in Thread Length, 0.08 in Eye Inside Diameter, 0.16 in Eye Outside Diameter, 10 lb, Steel, Zinc Plated, BHMA A138.18, NO 214 Trade, For Indoor/Outdoor Applications National Hardware Screw Eye, Small, Series: V2010, 11/16 in Overall Length, 0.28 in Thread Length, 0.06 in Eye Inside Diameter, 0.14 in Eye Outside Diameter, 5 lb, Steel, Zinc Plated, BHMA A138.18, NO 216 Trade, For Indoor/Outdoor Applications National Hardware Screw Eye, Medium, Series: V2012, 2-1/16 in Overall Length, 0.94 in Thread Length, 0.22 in Eye Inside Diameter, 0.48 in Eye Outside Diameter, 75 lb, Steel, Zinc Plated, BHMA A138.18, NO 104 Trade, For Indoor/Outdoor Applications
National Hardware V2012 Medium Screw Eye 1-25/32 in National Hardware V2012 Medium Screw Eye 1-17/32 in National Hardware V2012 Medium Screw Eye 1-5/16 in
National Hardware Screw Eye, Medium, Series: V2012, 1-25/32 in Overall Length, 0.73 in Thread Length, 0.19 in Eye Inside Diameter, 0.44 in Eye Outside Diameter, 50 lb, Steel, Zinc Plated, BHMA A138.18, NO 106 Trade, For Indoor/Outdoor Applications National Hardware Screw Eye, Medium, Series: V2012, 1-17/32 in Overall Length, 0.69 in Thread Length, 0.16 in Eye Inside Diameter, 0.38 in Eye Outside Diameter, 30 lb, Steel, Zinc Plated, BHMA A138.18, NO 108 Trade, For Indoor/Outdoor Applications National Hardware Screw Eye, Medium, Series: V2012, 1-5/16 in Overall Length, 0.56 in Thread Length, 0.14 in Eye Inside Diameter, 0.31 in Eye Outside Diameter, 30 lb, Steel, Zinc Plated, BHMA A138.18, NO 110 Trade, For Indoor/Outdoor Applications
National Hardware V2012 Medium Screw Eye 1-1/8 in National Hardware V2012 Medium Screw Eye 15/16 in National Hardware V2014 Large Screw Eye 1-3/8 in
National Hardware Screw Eye, Medium, Series: V2012, 1-1/8 in Overall Length, 0.44 in Thread Length, 0.1 in Eye Inside Diameter, 0.28 in Eye Outside Diameter, 10 lb, Steel, Zinc Plated, BHMA A138.18, NO 112 Trade, For Indoor/Outdoor Applications National Hardware Screw Eye, Medium, Series: V2012, 15/16 in Overall Length, 0.31 in Thread Length, 0.08 in Eye Inside Diameter, 0.25 in Eye Outside Diameter, 5 lb, Steel, Zinc Plated, BHMA A138.18, NO 114 Trade, For Indoor/Outdoor Applications National Hardware Screw Eye, Large, Series: V2014, 1-3/8 in Overall Length, 0.56 in Thread Length, 0.14 in Eye Inside Diameter, 0.41 in Eye Outside Diameter, 25 lb, Steel, Zinc Plated, BHMA A138.18, NO 10 Trade, For Indoor/Outdoor Applications
National Hardware V2014 Large Screw Eye 1-3/16 in National Hardware V2014 Large Screw Eye 1-1/16 in National Hardware V2014 Large Screw Eye 1-15/16 in
National Hardware Screw Eye, Large, Series: V2014, 1-3/16 in Overall Length, 0.44 in Thread Length, 0.1 in Eye Inside Diameter, 0.38 in Eye Outside Diameter, 10 lb, Steel, Zinc Plated, BHMA A138.18, NO 12 Trade, For Indoor/Outdoor Applications National Hardware Screw Eye, Large, Series: V2014, 1-1/16 in Overall Length, 0.31 in Thread Length, 0.08 in Eye Inside Diameter, 0.34 in Eye Outside Diameter, 5 lb, Steel, Zinc Plated, BHMA A138.18, NO 14 Trade, For Indoor/Outdoor Applications National Hardware Screw Eye, Large, Series: V2014, 1-15/16 in Overall Length, 3/4 in Thread Length, 0.19 in Eye Inside Diameter, 0.53 in Eye Outside Diameter, 50 lb, Steel, Zinc Plated, BHMA A138.18, NO 6 Trade, For Indoor/Outdoor Applications
National Hardware V2014 Large Screw Eye 1-5/8 in Stanley 324673 Large Screw Eye Stanley 220459 Large Screw Eye
National Hardware Screw Eye, Large, Series: V2014, 1-5/8 in Overall Length, 0.69 in Thread Length, 0.16 in Eye Inside Diameter, 0.47 in Eye Outside Diameter, 30 lb, Steel, Zinc Plated, BHMA A138.18, NO 8 Trade, For Indoor/Outdoor Applications Sharp screw point bites into wood. Rust resistant for use in exterior and interior applications. Sharp screw point bites into wood. Rust resistant for use in exterior and interior applications.
Stanley 220442 Large Screw Eye Stanley 324657 Large Screw Eye Ook 59203 Assorted Screw Eye Kit
Sharp screw point bites into wood. Rust resistant for use in exterior and interior applications. Sharp screw point bites into wood. Rust resistant for use in exterior and interior applications. Constructed of very high quality steel and with excellent threading. Comes with 50 pieces of 4 different screw eyes. Screw eyes attach to back of the frame 1/3 of the way down. Available in several different sizes to accommodate all different wood frame sizes.
Mintcraft LR220 Medium Screw Eye Stanley 316489 Weldable Rebar Frost King SP1/12 Construction Insulation
Sharp screw point bites into wood. Stanley Weldable Rebar, 1/2 in, NO 4 Nominal, 36 in Overall Length, Steel Creates an insulating barrier that retains heat or cold, seals out weather and damps vibration. Can be used around water heaters, oil burners, heating and air conditioner ducts; prevents heat loss and sweating on pipes, auto hoods and trunks.
Mintcraft LR219 Medium Screw Eye Mintcraft LR214 Large Screw Eye Quik-Tube 6922-01 Building Form
Sharp screw point bites into wood. Sharp screw point bites into wood. Used by homeowners and residential contractors to create everything from lamp post and mailbox bases to deck supports. Easy-to-use cardboard tube, scaled-down version of rigid fiber forms that heavy-construction contractors use. Pour concrete in form, let it dry, then cut away form. Length can be cut down if needed.
Mintcraft LR230 Small Screw Eye Mintcraft LR218 Medium Screw Eye Stanley 220665 Lag Eye Bolt
Sharp screw point bites into wood. Sharp screw point bites into wood. Sharp points bite into wood quickly and easily. For use in exterior and interior applications. Rust resistant.
Mintcraft LR213 Large Screw Eye Mintcraft LR229 Small Screw Eye Stanley 346965 Weldable Rebar
Sharp screw point bites into wood. Sharp screw point bites into wood. Stanley Weldable Rebar, 1/2 in, NO 4 Nominal, 4 ft Overall Length, Steel, Used in Landscaping
SCREW EYE MED STL 9/32X1-1/8IN Stanley 347682 Eye Bolt Quikrete 6922-02 Concrete Quik-Tube Form
Sharp screw point bites into wood. For use in exterior and interior applications. Hex nut included. Used by homeowners and residential contractors to create everything from lamp post and mailbox bases to deck supports. Easy-to-use cardboard tube, scaled-down version of rigid fiber forms that heavy-construction contractors use. Pour concrete in form, let it dry, then cut away form. Length can be cut down if needed.
Stanley 347690 Eye Bolt National Hardware 2160BC Eye Bolt Stanley 220673 Lag Eye Bolt
For use in exterior and interior applications. Hex nut included. National Hardware Eye Bolt, Series: 2160BC, 3/4 in Thread, 8 in Overall Length, 675 lb, Steel, Zinc Plated, Includes: Hex Nut, BHMA A138.18, For Interior, Exterior, Home and Industrial Applications Sharp points bite into wood quickly and easily. For use in exterior and interior applications. Rust resistant.
National Hardware 2160BC Eye Bolt Stanley 316497 Weldable Rebar Stanley 221218 Eye Bolt
EYE BOLTS 3/4X6IN ZN PLT
Our Price: $10.65
National Hardware Eye Bolt, Series: 2160BC, 3/4 in Thread, 6 in Overall Length, 675 lb, Steel, Zinc Plated, Includes: Hex Nut, BHMA A138.18, For Interior, Exterior, Home and Industrial Applications Stanley Weldable Rebar, 1/2 in, NO 4 Nominal, 72 in Overall Length, Steel, Used in Landscaping For use in exterior and interior applications. Hex nut included.
Stanley 221150 Eye Bolt Stanley 221051 Eye Bolt Stanley 347708 Eye Bolt
For use in exterior and interior applications. Hex nut included. For use in exterior and interior applications. Hex nut included. Stanley Eye Bolt, 5/8 in Thread, 14 in Overall Length, Stainless Steel, Zinc Plated
Stanley 221226 Eye Bolt Stanley 220426 Large Screw Eye Ad Tech T3438CK Mixing Nozzle Kit
For use in exterior and interior applications. Hex nut included. Sharp screw point bites into wood. Rust resistant for use in exterior and interior applications. Nozzle kit for Ultrabond epoxy 22 oz. system.  Hi-Flow nozzles reduce waste while increasing flow. 15 inch length snaps off to 10 inches if required.  3/8 diameter at tip.  Built in mixing nut allows for fast and easy attachment to cartridge.
Blueskin HE201WB929 Flash Membrane Mintcraft LR276 Eye Bolt Quik-Tube 6922-03 Building Form
A self-adhering membrane consisting of an SBS rubberized asphalt compound which is integrally laminated to a blue-engineered film. Excellent adhesion to prepared substrates of concrete, concrete block, primed steel, aluminum mill finish, anodized aluminum, galvanized metal, gypsum board and plywood; impermeable to air, moisture vapor and water; easy to install peel and stick application, no flame required; thickness controlled at point of manufacture; membrane is self-sealing when penetrated with self-tapping screws or nails. Thickness: 25 mils. Eye bolts with nuts. Assembled. Rust resistant. Used by homeowners and residential contractors to create everything from lamp post and mailbox bases to deck supports. Easy-to-use cardboard tube, scaled-down version of rigid fiber forms that heavy-construction contractors use. Pour concrete in form, let it dry, then cut away form. Length can be cut down if needed.
Stanley 221077 Eye Bolt Stanley 221069 Eye Bolt Stanley 220681 Lag Eye Bolt
For use in exterior and interior applications. Hex nut included. For use in exterior and interior applications. Hex nut included. Sharp points bite into wood quickly and easily. For use in exterior and interior applications. Rust resistant.
Mintcraft LR249 Lag Screw Eye Mintcraft LR248 Lag Thread Lag Screw Eye BOLT EYE ZINC PLATED 3/4X10IN
EYE BOLTS 3/4X10IN ZN PLT
Our Price: $12.96
Prosource Lag Screw Eye, 1/4 in Thread, 3-3/4 in Overall Length, Sharp Point, Stainless Steel, Zinc Plated Prosource Lag Screw Eye, Lag Thread, 1/4 in Thread, 3 in Overall Length, Sharp Point, Steel, Bright Zinc Plated National Hardware Eye Bolt, Series: 2160BC, 3/4 in Thread, 10 in Overall Length, 675 lb, Steel, Zinc-Plated, Includes: Hex Nut, For Interior, Exterior, Home and Industrial Applications
Stanley 221234 Eye Bolt Mintcraft LR278 Eye Bolt Stanley 221242 Eye Bolt
For use in exterior and interior applications. Hex nut included. Eye bolts with nuts. Assembled. Rust resistant. For use in exterior and interior applications. Hex nut included.
Mintcraft LR251 Lag Screw Eye Mintcraft LR250 Lag Screw Eye Stanley 221085 Eye Bolt
Prosource Lag Screw Eye, 5/16 in Thread, 4 in Overall Length, Sharp Point, Steel, Bright Zinc Plated Prosource Lag Screw Eye, 1/4 in Thread, 5 in Overall Length, Steel, Bright Zinc Plated For use in exterior and interior applications. Hex nut included.
Mintcraft LR267 Eye Bolt Mintcraft LR212 Large Screw Eye Mintcraft LR277 Eye Bolt
Eye bolts with nuts. Assembled. Rust resistant. Sharp screw point bites into wood. Eye bolts with nuts. Assembled. Rust resistant.
Mintcraft LR265 Eye Bolt Stanley 221259 Eye Bolt Stanley 221267 Eye Bolt
Eye bolts with nuts. Assembled. Rust resistant. For use in exterior and interior applications. Hex nut included. For use in exterior and interior applications. Hex nut included.
Blue Skin BH200WB4559 Window and Door Flashing Mintcraft LR266 Eye Bolt Stanley 220434 Large Screw Eye
Self-adhering membrane consisting of an SBS rubberized asphalt compound which is integrally laminated to a blue engineered film. The membrane is specifically designed to be self-adhered to a prepared substrate. SBS modified membrane can be applied in temperatures as low as 10 F. Blue polypropylene film top surface and siliconized release film bottom surface. Excellent adhesion to prepared substrates of concrete, concrete block, primed steel, aluminum mill finish, anodized aluminum, galvanized metal, gypsum board, and plywood. Impermeable to air, moisture vapor, and water. Peel and stick application; no flame required. Factory controlled thickness. .9mm thickness. Self-sealing when punctured. Eye bolts with nuts. Assembled. Rust resistant. Sharp screw point bites into wood. Rust resistant for use in exterior and interior applications.
Mintcraft LR211 Large Screw Eye BOLT EYE ZINC PLATED 3/4X12IN Stanley 220699 Lag Eye Bolt
EYE BOLTS 3/4X12IN ZN PLT
Our Price: $15.28
Sharp screw point bites into wood. National Hardware Eye Bolt, Series: 2160BC, 3/4 in Thread, 12 in Overall Length, 675 lb, Steel, Zinc-Plated, Includes: Hex Nut, For Interior, Exterior, Home and Industrial Applications Sharp points bite into wood quickly and easily. For use in exterior and interior applications. Rust resistant.
Mintcraft LR252 Lag Screw Eye Mintcraft LR279 Eye Bolt Stanley 221119 Eye Bolt
Prosource Lag Screw Eye, 5/16 in Thread, 5 in Overall Length, Sharp Point, Steel, Bright Zinc Plated Eye bolts with nuts. Assembled. Rust resistant. For use in exterior and interior applications. Hex nut included.
Mintcraft LR286 Eye Bolt Mintcraft LR283 Eye Bolt Stanley 221275 Eye Bolt
Eye bolts with nuts. Assembled. Rust resistant. Eye bolts with nuts. Assembled. Rust resistant. For use in exterior and interior applications. Hex nut included.
Stanley 220707 Lag Eye Bolt Mintcraft LR253 Lag Screw Eye Mintcraft LR271 Eye Bolt
Sharp points bite into wood quickly and easily. For use in exterior and interior applications. Rust resistant. Prosource Lag Screw Eye, 5/16 in Thread, 6 in Overall Length, Sharp Point, Steel, Bright Zinc Plated Eye bolts with nuts. Assembled. Rust resistant.
Mintcraft LR281 Eye Bolt Mintcraft LR284 Eye Bolt Stanley 221283 Eye Bolt
Eye bolts with nuts. Assembled. Rust resistant. Eye bolts with nuts. Assembled. Rust resistant. For use in exterior and interior applications. Hex nut included.
Stanley 221127 Eye Bolt National Hardware 2160BC Eye Bolt Blueskin HE201WB968 Flash Membrane
EYE BOLTS 3/4X14IN ZN PLT
Our Price: $18.02
For use in exterior and interior applications. Hex nut included. National Hardware Eye Bolt, Series: 2160BC, 3/4 in Thread, 14 in Overall Length, 675 lb, Steel, Zinc Plated, Includes: Hex Nut, BHMA A138.18, For Interior, Exterior, Home and Industrial Applications A self-adhering membrane consisting of an SBS rubberized asphalt compound which is integrally laminated to a blue-engineered film. Excellent adhesion to prepared substrates of concrete, concrete block, primed steel, aluminum mill finish, anodized aluminum, galvanized metal, gypsum board and plywood; impermeable to air, moisture vapor and water; easy to install peel and stick application, no flame required; thickness controlled at point of manufacture; membrane is self-sealing when penetrated with self-tapping screws or nails. Thickness: 25 mils.
Mintcraft LR255 Lag Thread Lag Screw Eye BOLT EYE ZINC PLATED 1X8IN    INSUL R11K 15X40FT MINI-ROLL
EYE BOLTS 1X8IN ZN PLT
Our Price: $18.90
Prosource Lag Screw Eye, Lag Thread, 3/8 in Thread, 4-1/2 in Overall Length, Sharp Point, Steel, Bright Zinc Plated National Hardware Eye Bolt, Series: 2160BC, 1 in Thread, 8 in Overall Length, 1450 lb, Steel, Zinc-Plated, Includes: Hex Nut, For Interior, Exterior, Home and Industrial Applications Kraft faced mini rolls - "Greenguard" certified LEED eligible.
Stanley 221291 Eye Bolt Stanley 220418 Large Screw Eye FORM CONCRETE FOOT PLASTC 22IN
For use in exterior and interior applications. Hex nut included. Sharp screw point bites into wood. Rust resistant for use in exterior and interior applications. Fastest, easiest way to form concrete footings; patented square footing form decreases cycle time, labor and material cost; can be sized, attached to construction tube, placed in excavated hole and backfilled. Can be used with rebar to reinforce footing or column if needed.
INSUL R13K 15IN X 32FT ROLL   Ultra Bond 1 A9-1 Anchoring Adhesive Stanley 220475 Large Screw Eye
Kraft faced mini rolls - "Greenguard" certified LEED eligible. Use for anchoring and doweling. Long working time with a quick cure time. Moisture insensitive, can be used in underwater environments, concrete, hollow block, brick, clay and stone. Ideal for vertical, horizontal, and screen applications, seismic anchoring and bracing, surface crack repair. Ultra high-strength epoxy mixes through a static mixing tube and can also be resealed which means that any remaining material can be saved for later use. Cartridge w/nozzle. Sharp screw point bites into wood. Rust resistant for use in exterior and interior applications.
Stanley 221135 Eye Bolt Mintcraft LR256 Lag Screw Eye Mintcraft LR268 Eye Bolt
For use in exterior and interior applications. Hex nut included. Prosource Lag Screw Eye, 3/8 in Thread, 5 in Overall Length, Sharp Point, Steel, Bright Zinc Plated Eye bolts with nuts. Assembled. Rust resistant.
BOLT EYE ZINC PLATED 1X10IN   Mintcraft LR254 Lag Screw Eye Mintcraft LR269 Eye Bolt
EYE BOLTS 1X10IN ZN PLT
Our Price: $21.14
National Hardware Eye Bolt, Series: 2160BC, 1 in Thread, 10 in Overall Length, 1450 lb, Steel, Zinc-Plated, Includes: Hex Nut, For Interior, Exterior, Home and Industrial Applications Prosource Lag Screw Eye, 3/8 in Thread, 4 in Overall Length, Sharp Point, Steel, Bright Zinc Plated Eye bolts with nuts. Assembled. Rust resistant.
Mintcraft LR270 Eye Bolt Miraclebond 1350 A9-MB1350HN Anchoring Adhesive Marshall JP16 Adjustable Extend-O-Post Jackpost
Eye bolts with nuts. Assembled. Rust resistant. Two component (1:1 ratio), 100-percent solids, high aspect ceramic blend, solvent-free, non-sag, high strength, high modulus, moisture insensitive epoxy system. Ideal for use as a bonding agent for almost any material, including metal, concrete, brick, wood, stone, block and other substrates. Can also be used for repairing holes, spalls, cracks in concrete, repairing rotted wood, installing and repairing anchor bolts or hand rails. LIMITATIONS: Minimum substrate and ambient temperature 40 degrees F (4.44 degrees C),  Cartridge with two nozzles; medium duty caulking tool required. Use for supporting sagging floors, weak beams and warping stairways. 2-1/4" x 15 gauge prime steel inner tubing. 2-1/2" x 15 gauge prime steel outer tubing. 2-1/4" steel collar. 1" x 6" steel screw. Two 4" x 4" x 10 gauge steel plates. 7" turning handle. Grooved pin and plain pin. Flow coated with red corrosion-resistant paint. Packed with instructions. UPC symbol on carton. Maximum load capacity obtained at lowest extension.
Stanley 221143 Eye Bolt Mintcraft LR282 Eye Bolt Mintcraft LR272 Eye Bolt
For use in exterior and interior applications. Hex nut included. Eye bolts with nuts. Assembled. Rust resistant. Eye bolts with nuts. Assembled. Rust resistant.
Mintcraft LR285 Eye Bolt Stanley 347666 Eye Bolt FORM CONCRETE FOOT PLASTC 28IN
Eye bolts with nuts. Assembled. Rust resistant. For use in exterior and interior applications. Hex nut included. Fastest, easiest way to form concrete footings; patented square footing form decreases cycle time, labor and material cost; can be sized, attached to construction tube, placed in excavated hole and backfilled. Can be used with rebar to reinforce footing or column if needed.
Reflectix 2222-16-25 7-Layer Reflective Staple Tab Insulation Blueskin HE201WB954 Flash Membrane Stanley 220715 Lag Eye Bolt
Easy installation ? scissors and staple gun are all you need.  3/4" staple tab designed for 16" OC Joists. All season performance.  Great for insulating radiant heating systems.  5/16? thick, multi layer, double bubble reflective insulation .  Reflects 94% of radiant heat.  Class 1, Class A fire rating.  Any seams should be sealed with TVM Metalized Tape for maximum effectiveness. A self-adhering membrane consisting of an SBS rubberized asphalt compound which is integrally laminated to a blue-engineered film. Excellent adhesion to prepared substrates of concrete, concrete block, primed steel, aluminum mill finish, anodized aluminum, galvanized metal, gypsum board and plywood; impermeable to air, moisture vapor and water; easy to install peel and stick application, no flame required; thickness controlled at point of manufacture; membrane is self-sealing when penetrated with self-tapping screws or nails. Thickness: 25 mils. Sharp points bite into wood quickly and easily. For use in exterior and interior applications. Rust resistant.
Mintcraft LR280 Eye Bolt Mintcraft LR207 Large Screw Eye Mintcraft LR274 Eye Bolt
Eye bolts with nuts. Assembled. Rust resistant. Sharp screw point bites into wood. Eye bolts with nuts. Assembled. Rust resistant.
BOLT EYE ZINC PLATED 1X12IN   Stanley 347674 Eye Bolt Mintcraft LR258 Lag Screw Eye
EYE BOLTS 1X12IN ZN PLT
Our Price: $24.96
National Hardware Eye Bolt, Series: 2160BC, 1 in Thread, 12 in Overall Length, 1450 lb, Steel, Zinc-Plated, Includes: Hex Nut, For Interior, Exterior, Home and Industrial Applications For use in exterior and interior applications. Hex nut included. Prosource Lag Screw Eye, 3/8 in Thread, 8 in Overall Length, Sharp Point, Steel, Bright Zinc Plated
Mintcraft LR273 Eye Bolt Mintcraft LR257 Lag Screw Eye Mintcraft LR287 Eye Bolt
Eye bolts with nuts. Assembled. Rust resistant. Prosource Lag Screw Eye, 3/8 in Thread, 6 in Overall Length, Sharp Point, Steel, Bright Zinc Plated Eye bolts with nuts. Assembled. Rust resistant.
Protecto Seal 45 805204SW Exposable Waterproofing Membrane BOLT EYE ZINC PLATED 1X14IN   Stanley 220467 Large Screw Eye
EYE BOLTS 1X14IN ZN PLT
Our Price: $29.44
Exposable membrane is quick and easy to use. Made with styrene-butadeine-styrene (SBS) modified rubberized asphalt pressure-sensitive adhesive. Durable, puncture and abrasion resistant. A cross laminated polyethylene film is laminated to an aluminum foil for ultraviolet and weather resistance. Shrink Wrapped. National Hardware Eye Bolt, Series: 2160BC, 1 in Thread, 14 in Overall Length, 1450 lb, Steel, Zinc-Plated, Includes: Hex Nut, For Interior, Exterior, Home and Industrial Applications Sharp screw point bites into wood. Rust resistant for use in exterior and interior applications.
Ultra Bond 1300 A22-1300N Anchoring Adhesive Stanley 220723 Lag Eye Bolt Mutual 14987-0-24 Economy Silt Fence
Two  component (1:1 ratio), 100 percent solids, high modulus, structural epoxy gel. It is a solvent free, low odor high strength, moisture insensitive, non-sag epoxy system. The resin and hardener are uniformly dispensed from a dual cartridge system and mixed simultaneously through a mixing nozzle or available in bulk. Long working time with a full cure in 24 hours. Moisture insensitive, may be used in damp environments, concrete, hollow block, brick, clay and stone. Ideal for vertical, horizontal, and screen applications. Structural bonding of concrete to concrete. Meets ASTM C881-14: Type I, II, IV and V, Grade 3, Class B and C. Cartridges with Nozzle. Sharp points bite into wood quickly and easily. For use in exterior and interior applications. Rust resistant. Constructed of economical silt fabrics and hardwood stakes, spaced every 10', 11 stakes per 100' of fabric. Erosion and sediment control material, helps protect environment. Contains sediment, topsoil, and other organic material while allowing water to flow through. 125 lbs. grab tensile, 15% grab elongation, 347 psi mullen burst, 60 lbs. puncture, 80 lbs. trapezoidal tear, 80% SR UV resistance, 30 gallons/minute squared permittivity (1 sec).
Mintcraft LR288 Eye Bolt Mutual 14987-0-36 Economy Silt Fence INSUL R19K 6.25H X 15L X 94W
Eye bolts with nuts. Assembled. Rust resistant. Constructed of economical silt fabrics and hardwood stakes, spaced every 10', 11 stakes per 100' of fabric. Erosion and sediment control material, helps protect environment. Contains sediment, topsoil, and other organic material while allowing water to flow through. 125 lbs. grab tensile, 15% grab elongation, 347 psi mullen burst, 60 lbs. puncture, 80 lbs. trapezoidal tear, 80% SR UV resistance, 30 gallons/minute squared permittivity (1 sec). Kraft Faced Pro Cut Batts - "Greenguard" certified LEED eligible.
INSUL R19K 15IN X 39.16FT ROLL Marshall JP36 Adjustable Extend-O-Post Jackpost Stanley 221309 Extra Eye Bolt
Kraft faced rolls - "Greenguard" certified LEED eligible. Use for supporting sagging floors, weak beams and warping stairways. 2-1/4" x 15 gauge prime steel inner tubing. 2-1/2" x 15 gauge prime steel outer tubing. 2-1/4" steel collar. 1" x 6" steel screw. Two 4" x 4" x 10 gauge steel plates. 7" turning handle. Grooved pin and plain pin. Flow coated with red corrosion-resistant paint. Packed with instructions. UPC symbol on carton. Maximum load capacity obtained at lowest extension. For use in exterior and interior applications. Hex nut included.
Blueskin HE201WB976 Flash Membrane Mintcraft LR259 Lag Screw Eye Mintcraft LR289 Eye Bolt
A self-adhering membrane consisting of an SBS rubberized asphalt compound which is integrally laminated to a blue-engineered film. Excellent adhesion to prepared substrates of concrete, concrete block, primed steel, aluminum mill finish, anodized aluminum, galvanized metal, gypsum board and plywood; impermeable to air, moisture vapor and water; easy to install peel and stick application, no flame required; thickness controlled at point of manufacture; membrane is self-sealing when penetrated with self-tapping screws or nails. Thickness: 25 mils. Prosource Lag Screw Eye, 7/16 in Thread, 5-1/4 in Overall Length, Sharp Point, Steel, Bright Zinc Plated Eye bolts with nuts. Assembled. Rust resistant.
Stanley 221317 Extra Eye Bolt Mintcraft LR275 Eye Bolt Mutual 14987-2-2410 Economy Silt Fence
For use in exterior and interior applications. Hex nut included. Eye bolts with nuts. Assembled. Rust resistant. Constructed of economical silt fabrics and hardwood stakes, spaced every 10', 11 stakes per 100' of fabric. Erosion and sediment control material, helps protect environment. Contains sediment, topsoil, and other organic material while allowing water to flow through. 125 lbs. grab tensile, 15% grab elongation, 347 psi mullen burst, 60 lbs. puncture, 80 lbs. trapezoidal tear, 80% SR UV resistance, 30 gallons/minute squared permittivity (1 sec).
Mintcraft LR291 Eye Bolt Marshall JP55 Adjustable Extend-O-Post Jackpost Mintcraft LR290 Eye Bolt
Eye bolts with nuts. Assembled. Rust resistant. Use for supporting sagging floors, weak beams and warping stairways. 2-1/4" x 15 gauge prime steel inner tubing. 2-1/2" x 15 gauge prime steel outer tubing. 2-1/4" steel collar. 1" x 6" steel screw. Two 4" x 4" x 10 gauge steel plates. 7" turning handle. Grooved pin and plain pin. Flow coated with red corrosion-resistant paint. Packed with instructions. UPC symbol on carton. Maximum load capacity obtained at lowest extension. Eye bolts with nuts. Assembled. Rust resistant.
TVM 75055 Sill Seal TVM 75035 Sill Seal INSUL R11K 15IN X 70.5FT ROLL
Designed to fill the air gaps between the sill plate and the foundation wall, reducing air infiltration. It's durable, moisture resistant characteristics prevent water and insect intrusion. Made of high grade polyethylene. Yellow color. Prevents rotting of the sill plate and will not deteriorate. Designed to fill the air gaps between the sill plate and the foundation wall, reducing air infiltration. It's durable, moisture resistant characteristics prevent water and insect intrusion. Made of high grade polyethylene. Yellow color. Prevents rotting of the sill plate and will not deteriorate. Kraft faced rolls - "Greenguard" certified LEED eligible.
Mintcraft LR210 Large Screw Eye TVM 75075 Sill Seal Stanley 221325 Extra Eye Bolt
Sharp screw point bites into wood. Designed to fill the air gaps between the sill plate and the foundation wall, reducing air infiltration. It's durable, moisture resistant characteristics prevent water and insect intrusion. Made of high grade polyethylene. Yellow color. Prevents rotting of the sill plate and will not deteriorate. For use in exterior and interior applications. Hex nut included.
Stanley 221333 Extra Eye Bolt INSUL R13K 15IN X 93IN BATT   INSUL R19K 23IN X 94IN BATT
For use in exterior and interior applications. Hex nut included. Kraft Faced Pro Cut Batts - "Greenguard" certified LEED eligible. Kraft Faced Pro Cut Batts - "Greenguard" certified LEED eligible.
INSUL R19K 23IN X 39.16FT ROLL Mutual 14987-2-3606 Economy Silt Fence FORM CONCRETE FOOT PLASTC 32IN
Kraft faced rolls - "Greenguard" certified LEED eligible. Constructed of economical silt fabrics and hardwood stakes, spaced every 6', 17 stakes per 100' of fabric. Erosion and sediment control material, helps protect environment. Contains sediment, topsoil, and other organic material while allowing water to flow through. 125 lbs. grab tensile, 15% grab elongation, 347 psi mullen burst, 60 lbs. puncture, 80 lbs. trapezoidal tear, 80% SR UV resistance, 30 gallons/minute squared permitivity (1 sec). Fastest, easiest way to form concrete footings; patented square footing form decreases cycle time, labor and material cost; can be sized, attached to construction tube, placed in excavated hole and backfilled. Can be used with rebar to reinforce footing or column if needed.
Marshall JP79 Adjustable Extend-O-Post Jackpost Marshall JP84 Adjustable Extend-O-Post Jackpost Stanley 221341 Extra Eye Bolt
Use for supporting sagging floors, weak beams and warping stairways. 2-1/4" x 15 gauge prime steel inner tubing. 2-1/2" x 15 gauge prime steel outer tubing. 2-1/4" steel collar. 1" x 6" steel screw. Two 4" x 4" x 10 gauge steel plates. 7" turning handle. Grooved pin and plain pin. Flow coated with red corrosion-resistant paint. Packed with instructions. UPC symbol on carton. Maximum load capacity obtained at lowest extension. Use for supporting sagging floors, weak beams and warping stairways. 2-1/4" x 15 gauge prime steel inner tubing. 2-1/2" x 15 gauge prime steel outer tubing. 2-1/4" steel collar. 1" x 6" steel screw. Two 4" x 4" x 10 gauge steel plates. 7" turning handle. Grooved pin and plain pin. Flow coated with red corrosion-resistant paint. Packed with instructions. UPC symbol on carton. Maximum load capacity obtained at lowest extension. For use in exterior and interior applications. Hex nut included.
INSUL R11K 23IN X 70.5FT ROLL CMC PIN04N018 Non-Graded Rebar Pin TVM 2220-24-50 Double Bubble Construction Insulation
Kraft faced rolls - "Greenguard" certified LEED eligible. Reinforced bar, commonly used in concrete and masonry structures. Safe to use; non-toxic; easy to install.  Does not require special protective clothing.  Lowers air conditioning/heating costs.  5/16? thick, multi layer, double bubble reflective insulation in rolls of various widths and lengths.  Reflects 94% of radiant heat. Class 1, Class A fire rating.  Seams should be sealed with TVM Metalized Tape for maximum effectiveness.
Marshall JP84HD Adjustable Extend-O-Post Jackpost INSUL R30K 16IN X 48IN BATT   Ad Tech TM22HD Dispensing Tool
Use for supporting sagging floors, weak beams and warping stairways. 2-1/2" x 14 gauge prime steel inner tubing. 2-3/4" x 14 gauge prime steel outer tubing. 2-1/2" steel collar. 1-1/4" x 6" steel screw. Two 4" x 6" x 7 gauge steel plates. 7" turning handle. Grooved pin and plain pin. Flow coated with red corrosion-resistant paint. Packed with instructions. UPC symbol on carton. Maximum load capacity obtained at lowest extension. Kraft faced batts; "Greenguard" certified LEED eligible. Features an in-line rod system, combined with a specifically designed friction plate that results in exceptional force making dispensing faster and reducing worker exertion and fatigue. Double gripping plates and steel trigger for increased durability and performance. For 22 Oz. cartridges, but comes with adaptable parts which allow for 16 Oz. cartridges as well.
Marshall AC363/3637 Adjustable Round Column Marshall AC369/3691 Adjustable Round Column Marshall AC386 Adjustable Round Column
3"OD 11 gauge (0.120 wall). 4" adjustment. Cold rolled steel screw. Turning bar provided with each post. Flow-coated inside and out with red corrosion-resistant paint. Heavy-duty cap and base plates slotted; holes to fit steel or wood beams. Embossed lugs grip posts firmly to avoid slipping. All parts are welded or wired together. Meets IRC and IBC Specifications Report No. CCRR-0145. 3"OD 11 gauge (0.120 wall). 4" adjustment. Cold rolled steel screw. Turning bar provided with each post. Flow-coated inside and out with red corrosion-resistant paint. Heavy-duty cap and base plates slotted; holes to fit steel or wood beams. Embossed lugs grip posts firmly to avoid slipping. All parts are welded or wired together. Meets IRC and IBC Specifications Report No. CCRR-0145. 3"OD 11 gauge (0.120 wall). 4" adjustment. Cold rolled steel screw. Turning bar provided with each post. Flow-coated inside and out with red corrosion-resistant paint. Heavy-duty cap and base plates slotted; holes to fit steel or wood beams. Embossed lugs grip posts firmly to avoid slipping. All parts are welded or wired together. Meets IRC and IBC Specifications Report No. CCRR-0145.
Marshall AC370/3704 Adjustable Round Column Marshall AC373/3737 Adjustable Round Column CMC PIN03NO18 Graded Rebar Pin
3"OD 11 gauge (0.120 wall). 4" adjustment. Cold rolled steel screw. Turning bar provided with each post. Flow-coated inside and out with red corrosion-resistant paint. Heavy-duty cap and base plates slotted; holes to fit steel or wood beams. Embossed lugs grip posts firmly to avoid slipping. All parts are welded or wired together. Meets IRC and IBC Specifications Report No. CCRR-0145. 3"OD 11 gauge (0.120 wall). 4" adjustment. Cold rolled steel screw. Turning bar provided with each post. Flow-coated inside and out with red corrosion-resistant paint. Heavy-duty cap and base plates slotted; holes to fit steel or wood beams. Embossed lugs grip posts firmly to avoid slipping. All parts are welded or wired together. Meets IRC and IBC Specifications Report No. CCRR-0145. Reinforced bar, commonly used in concrete and masonry structures.
Marshall AC390 Adjustable Round Column Marshall AC376/3760 Adjustable Round Column CMC PIN04N024 Non-Graded Rebar Pin
3"OD 11 gauge (0.120 wall). 4" adjustment. Cold rolled steel screw. Turning bar provided with each post. Flow-coated inside and out with red corrosion-resistant paint. Heavy-duty cap and base plates slotted; holes to fit steel or wood beams. Embossed lugs grip posts firmly to avoid slipping. All parts are welded or wired together. Meets IRC and IBC Specifications Report No. CCRR-0145. 3"OD 11 gauge (0.120 wall). 4" adjustment. Cold rolled steel screw. Turning bar provided with each post. Flow-coated inside and out with red corrosion-resistant paint. Heavy-duty cap and base plates slotted; holes to fit steel or wood beams. Embossed lugs grip posts firmly to avoid slipping. All parts are welded or wired together. Meets IRC and IBC Specifications Report No. CCRR-0145. Reinforced bar, commonly used in concrete and masonry structures.
Marshall AC379/3791 Adjustable Round Column Marshall AC380/3804 Adjustable Round Column INSUL R30K 24IN X 48IN BATT
3"OD 11 gauge (0.120 wall). 4" adjustment. Cold rolled steel screw. Turning bar provided with each post. Flow-coated inside and out with red corrosion-resistant paint. Heavy-duty cap and base plates slotted; holes to fit steel or wood beams. Embossed lugs grip posts firmly to avoid slipping. All parts are welded or wired together. Meets IRC and IBC Specifications Report No. CCRR-0145. 3"OD 11 gauge (0.120 wall). 4" adjustment. Cold rolled steel screw. Turning bar provided with each post. Flow-coated inside and out with red corrosion-resistant paint. Heavy-duty cap and base plates slotted; holes to fit steel or wood beams. Embossed lugs grip posts firmly to avoid slipping. All parts are welded or wired together. Meets IRC and IBC Specifications Report No. CCRR-0145. Kraft faced batts; "Greenguard" certified LEED eligible.
Marshall AC383/3837 Adjustable Round Column CMC PIN03N024 Rebar Pin Quikrete 6917-03 Expansion Joint
3"OD 11 gauge (0.120 wall). 4" adjustment. Cold rolled steel screw. Turning bar provided with each post. Flow-coated inside and out with red corrosion-resistant paint. Heavy-duty cap and base plates slotted; holes to fit steel or wood beams. Embossed lugs grip posts firmly to avoid slipping. All parts are welded or wired together. Meets IRC and IBC Specifications Report No. CCRR-0145. Reinforced bar, commonly used in concrete and masonry structures. Used where concrete meets concrete for a stronger bond. Expansion joint filler made from resilient wood to prevent damage during expansion and contraction of concrete. Used in driveways, sidewalks, and patios, between concrete slabs and to separate slabs from structures. Meets requirements of ASTM D 1751.
TVM 2220-48-50 Double Bubble Construction Insulation Henry HE102406 1-Part Aqua Primer Mutual 14640-4 Rebar Cap
Safe to use; non-toxic; easy to install.  Does not require special protective clothing.  Lowers air conditioning/heating costs.  5/16? thick, multi layer, double bubble reflective insulation in rolls of various widths and lengths.  Reflects 94% of radiant heat. Class 1, Class A fire rating.  Seams should be sealed with TVM Metalized Tape for maximum effectiveness. A polymer emulsion based primer for self-adhered membranes such as "modifiedPLUS", "SA, Blueskin, "SA, Blueskin PE200HT", "Blueskin WP 200" and "Low-Slope"; dries quickly; provides positive adhesion; not for sale in Southern CA; coverage: up to 500 sq ft/gal depending on porosity and texture of surface. OSHA rebar caps made of space age high-density polymer to protect against impalement injuries. Bright orange and fits rebar #4 - #8. Meets new OSHA requirement 344.90. Boxed.
Mutual 14640-3 Standard Rebar Cap Greenfiber INS541LD Low Dust Loose Fill Construction Insulation
Mushroom style rebar safety caps protect from protruding rebar at construction sites. Bright colors for excellent visibility. Use where the danger of impalement is not present. Blow-in fiber insulation designed for loose-fill attic applications covers 40 sq. ft. at  R-19. Made of 85 percent recycled paper fibers treated for fire resistance. SCS certified and meets ASTM C-739 and ASTM E-84. For use in attics, floors, and walls of residential new construction and re-insulation applications. Provides thermal performance and sound control. Provides a barrier against air infiltration by filling gaps and voids. Dry installation only - do not add water.
   
 
1