Home > HARDWARE > CONSTRUCTION HARDWARE > FOUNDATION HARDWARE > FLOOR JACK POSTS
Sort By:
1
Vermont 17117 Screw Hole Tapered Plug Vermont 17118 Screw Hole Tapered Plug Vermont 17119 Screw Hole Tapered Plug
Selected clear hardwood plugs. Unfinished, smooth sanded and tapered. Selected clear hardwood plugs. Unfinished, smooth sanded and tapered. Selected clear hardwood plugs. Unfinished, smooth sanded and tapered.
Vermont 17125 Screw Hole Tapered Plug Vermont 17126 Screw Hole Tapered Plug Vermont 17127 Screw Hole Tapered Plug
Selected clear hardwood plugs, unfinished, smooth sanded and tapered. Selected clear hardwood plugs, unfinished, smooth sanded and tapered. Selected clear hardwood plugs, unfinished, smooth sanded and tapered.
Vermont 17128 Screw Hole Tapered Plug Vermont 17120 Screw Hole Tapered Plug Acorn BT176-1C Bar Tie
Selected clear hardwood plugs, unfinished, smooth sanded and tapered. Selected clear hardwood plugs. Unfinished, smooth sanded and tapered. Used to secure the position of rebar during concrete pouring.
Waddell 8300.50 OAK DP Screw Hole Plug Waddell 8300.00 OAK DP Screw Hole Plug National Hardware V2011 Small Screw Eye 3/4 in
Unfinished hardwood plugs. Unfinished hardwood plugs. National Hardware Screw Eye, Small, Series: V2011, 3/4 in Overall Length, 1/4 in Thread Length, 0.1 in Eye Inside Diameter, 0.19 in Eye Outside Diameter, 15 lb, Solid Brass, NO 212-1/2 Trade, For Indoor/Outdoor Applications
National Hardware V2011 Small Screw Eye 5/8 in National Hardware V2011 Small Screw Eye 17/32 in National Hardware V2011 Small Screw Eye 15/32 in
National Hardware Screw Eye, Small, Series: V2011, 5/8 in Overall Length, 0.19 in Thread Length, 0.08 in Eye Inside Diameter, 0.16 in Eye Outside Diameter, 10 lb, Solid Brass, NO 214-1/2 Trade, For Indoor/Outdoor Applications National Hardware Screw Eye, Small, Series: V2011, 17/32 in Overall Length, 0.19 in Thread Length, 0.06 in Eye Inside Diameter, 0.14 in Eye Outside Diameter, 5 lb, Solid Brass, NO 216-1/2 Trade, For Indoor/Outdoor Applications National Hardware Screw Eye, Small, Series: V2011, 15/32 in Overall Length, 0.16 in Thread Length, 0.05 in Eye Inside Diameter, 0.12 in Eye Outside Diameter, 5 lb, Solid Brass, NO 217-1/2 Trade, For Indoor/Outdoor Applications
National Hardware V2011 Small Screw Eye 15/16 in National Hardware V2011 Small Screw Eye 13/16 in National Hardware V2011 Small Screw Eye 11/16 in
National Hardware Screw Eye, Small, Series: V2011, 15/16 in Overall Length, 0.44 in Thread Length, 0.1 in Eye Inside Diameter, 0.19 in Eye Outside Diameter, 15 lb, Solid Brass, NO 212 Trade, For Indoor/Outdoor Applications National Hardware Screw Eye, Small, Series: V2011, 13/16 in Overall Length, 0.31 in Thread Length, 0.08 in Eye Inside Diameter, 0.16 in Eye Outside Diameter, 10 lb, Solid Brass, NO 214 Trade, For Indoor/Outdoor Applications National Hardware Screw Eye, Small, Series: V2011, 11/16 in Overall Length, 0.28 in Thread Length, 0.06 in Eye Inside Diameter, 0.14 in Eye Outside Diameter, 5 lb, Solid Brass, NO 216 Trade, For Indoor/Outdoor Applications
National Hardware V2015 Large Screw Eye 1-3/8 in National Hardware V2015 Large Screw Eye 1-3/16 in National Hardware V2015 Large Screw Eye 1-1/16 in
National Hardware Screw Eye, Large, Series: V2015, 1-3/8 in Overall Length, 0.56 in Thread Length, 0.14 in Eye Inside Diameter, 0.41 in Eye Outside Diameter, 20 lb, Solid Brass, NO 10 Trade, For Indoor/Outdoor Applications National Hardware Screw Eye, Large, Series: V2015, 1-3/16 in Overall Length, 0.44 in Thread Length, 0.1 in Eye Inside Diameter, 0.38 in Eye Outside Diameter, 10 lb, Solid Brass, NO 12 Trade, For Indoor/Outdoor Applications National Hardware Screw Eye, Large, Series: V2015, 1-1/16 in Overall Length, 0.31 in Thread Length, 0.08 in Eye Inside Diameter, 0.34 in Eye Outside Diameter, 5 lb, Solid Brass, NO 14 Trade, For Indoor/Outdoor Applications
National Hardware V2015 Large Screw Eye 1-5/8 in SCREW EYE LRG BRS 13/32X1-3/8 SCREW EYE LRG BRS17/32X1-15/16
National Hardware Screw Eye, Large, Series: V2015, 1-5/8 in Overall Length, 0.69 in Thread Length, 0.16 in Eye Inside Diameter, 0.47 in Eye Outside Diameter, 25 lb, Solid Brass, NO 8 Trade, For Indoor/Outdoor Applications Sharp screw point bites into wood. Sharp screw point bites into wood.
Marshalltown 14731 Manual Tie Wire Twister Mintcraft 16570 Rugged Wire Twister Billy Penn 08212-25 Manual Bar Tie Twister
Safely and easily twists wire bar ties. Plastic handle. Rugged design. Compact size allows the tool to be used in tight space. Safely and easily twists wire bar ties. Hardwood handle, Ergonomic design. Makes tying fast and easy. Wood handle.
HINGE PIPE GATE ZN PLT 1-5/8IN Vestal 226 Brick Lintel HINGE PIPE GATE ZN PLT 2IN
Non-Welded, Assembled, Can Be Used In Exterior Or Interior Applications, Boxed Loose. Unique forming process develops high cross strength. Ample load-bearing capacity. Stiff in service. Free from sagging or buckling. All lintels should be shored until mortar has cured. Coated with black corrosion-resistant paint. Made in USA. Non-Welded, Assembled, Can Be Used In Exterior Or Interior Applications, Boxed Loose.
Vestal 230 Brick Lintel Ad Tech T3438CK Mixing Nozzle Kit Vestal 236 Brick Lintel
Unique forming process develops high cross strength. Ample load-bearing capacity. Stiff in service. Free from sagging or buckling. All lintels should be shored until mortar has cured. Coated with black corrosion-resistant paint. Made in USA. Nozzle kit for Ultrabond epoxy 22 oz. system.  Hi-Flow nozzles reduce waste while increasing flow. 15 inch length snaps off to 10 inches if required.  3/8 diameter at tip.  Built in mixing nut allows for fast and easy attachment to cartridge. Unique forming process develops high cross strength. Ample load-bearing capacity. Stiff in service. Free from sagging or buckling. All lintels should be shored until mortar has cured. Coated with black corrosion-resistant paint. Made in USA.
National Hardware V852 Anti-Sag Gate Kit Vestal 240 Brick Lintel Vestal 246 Brick Lintel
GATE REPAIR ZN PLT
Our Price: $14.50
National Hardware Anti-Sag Gate Kit, Series: V852, Includes: Top and Bottom Corner Bracket, Rope Clips, Cable, turnbuckle and Mounting Screws, Steel Housing, BHMA A138.18, Zinc Plated Unique forming process develops high cross strength. Ample load-bearing capacity. Stiff in service. Free from sagging or buckling. All lintels should be shored until mortar has cured. Coated with black corrosion-resistant paint. Made in USA. Unique forming process develops high cross strength. Ample load-bearing capacity. Stiff in service. Free from sagging or buckling. All lintels should be shored until mortar has cured. Coated with black corrosion-resistant paint. Made in USA.
Adjust-A-Gate UL301 Adjustable Drop Rod Kit Waddell 8300.50-CS Screw Hole Plug Waddell 8200.38 OAK DP-10 Screwhole Plug
Ideal use for double gate entry, by putting two gates together. Attaches directly to the frame. Helps prevent sagging and dragging of gate. Galvanized parts for long lasting protection and maximum life. Provides an anchoring rod to secure 1 side of a double gate. Easy on site assembly. For wood and composite. Steel hardware and screws included. Gate Not Included. Galvanized steel cane. Unfinished hardwood plugs. Waddell Screwhole Plug, 3/8 in, 4 in Overall Length, 4-1/2 in Width, Round Head, Oak, For use to cover screw holes completely
Waddell 8200.50-CS Screw Hole Plug Ultra Bond 1 A9-1 Anchoring Adhesive Waddell 8200.31-CS Screw Hole Plug
Unfinished hardwood plugs. Use for anchoring and doweling. Long working time with a quick cure time. Moisture insensitive, can be used in underwater environments, concrete, hollow block, brick, clay and stone. Ideal for vertical, horizontal, and screen applications, seismic anchoring and bracing, surface crack repair. Ultra high-strength epoxy mixes through a static mixing tube and can also be resealed which means that any remaining material can be saved for later use. Cartridge w/nozzle. Unfinished hardwood plugs.
Waddell 8300.38-CS Screw Hole Plug Miraclebond 1350 A9-MB1350HN Anchoring Adhesive Marshall JP16 Adjustable Extend-O-Post Jackpost
Unfinished hardwood plugs. Two component (1:1 ratio), 100-percent solids, high aspect ceramic blend, solvent-free, non-sag, high strength, high modulus, moisture insensitive epoxy system. Ideal for use as a bonding agent for almost any material, including metal, concrete, brick, wood, stone, block and other substrates. Can also be used for repairing holes, spalls, cracks in concrete, repairing rotted wood, installing and repairing anchor bolts or hand rails. LIMITATIONS: Minimum substrate and ambient temperature 40 degrees F (4.44 degrees C),  Cartridge with two nozzles; medium duty caulking tool required. Use for supporting sagging floors, weak beams and warping stairways. 2-1/4" x 15 gauge prime steel inner tubing. 2-1/2" x 15 gauge prime steel outer tubing. 2-1/4" steel collar. 1" x 6" steel screw. Two 4" x 4" x 10 gauge steel plates. 7" turning handle. Grooved pin and plain pin. Flow coated with red corrosion-resistant paint. Packed with instructions. UPC symbol on carton. Maximum load capacity obtained at lowest extension.
Waddell 8200.38-CS Screw Hole Plug Waddell 8300.31-CS Screw Hole Plug National Hardware DPV845 Gate Kit
GATE KITS BLACK
Our Price: $22.41
Unfinished hardwood plugs. Unfinished hardwood plugs. National Hardware Gate Kit, Series: DPV845, Includes: (1) Gate Latch, (2) T-Hinges, Mounting Fasteners, Decorative Hinges, Latch Self Latching and Visual Pac, Steel Housing, Black, Suitable For Use With: Doors, Gates and Sheds, BHMA A138.18, 55 lb Load
Waddell 8200.25-CS Screw Hole Plug GATE KIT BLACK                Billy Penn 8201 Triple Rod Chair
GATE KITS BLACK
Our Price: $24.95
Unfinished hardwood plugs. Gate hardware kit with a rustic design. WeatherGuard for maximum protection from the outdoor elements. Includes: 2 hinges, 1 latch, 1 pull and fasteners. Safe working load 55 lbs. Visual-pack. Used to hold rebar off grade and centered in the foundation trench.
GATE KIT BLACK                GATE KIT BLACK                ROD CHAIR REBAR NO2 MTL
GATE KITS BLACK
Our Price: $27.57
GATE KITS BLACK
Our Price: $27.57
ROD CHAIR REBAR NO2 MTL
Our Price: $27.82
Designed for surface applications on doors, gates and sheds. Kit includes: 1 - Gate latch, 2 - T-hinges, 1 - Pull, Mounting fasteners. Decorative pull and hinges. Visual-pack. Designed for surface applications on doors, gates and sheds. Kit includes: 1 - Gate latch, 2 - Gate hinges, Mounting fasteners, Adjusting tool for spring hinges. Visual-pack. Used to support rebar rods when pouring concrete foundation or slab.
Waddell 8300.31 OAK CS Screw Hole Plug Waddell 8300.25 OAK CS Screw Hole Plug Waddell 8300.38 OAK CS Screw Hole Plug
Unfinished hardwood plugs. Unfinished hardwood plugs. Unfinished hardwood plugs.
Waddell 8300.50 OAK CS Screw Hole Plug Marshalltown TWR26 Tie Wire Reel Ultra Bond 1300 A22-1300N Anchoring Adhesive
Unfinished hardwood plugs. Made of lightweight durable plastic to give many years of trouble free use. Fits any standard size belt. Accomodates all types of tie wire. Two  component (1:1 ratio), 100 percent solids, high modulus, structural epoxy gel. It is a solvent free, low odor high strength, moisture insensitive, non-sag epoxy system. The resin and hardener are uniformly dispensed from a dual cartridge system and mixed simultaneously through a mixing nozzle or available in bulk. Long working time with a full cure in 24 hours. Moisture insensitive, may be used in damp environments, concrete, hollow block, brick, clay and stone. Ideal for vertical, horizontal, and screen applications. Structural bonding of concrete to concrete. Meets ASTM C881-14: Type I, II, IV and V, Grade 3, Class B and C. Cartridges with Nozzle.
Vestal 250 Brick Lintel Marshall JP36 Adjustable Extend-O-Post Jackpost Krusin 80099 No Sag Gate Bracket Kit
Unique forming process develops high cross strength. Ample load-bearing capacity. Stiff in service. Free from sagging or buckling. All lintels should be shored until mortar has cured. Coated with black corrosion-resistant paint. Made in USA. Use for supporting sagging floors, weak beams and warping stairways. 2-1/4" x 15 gauge prime steel inner tubing. 2-1/2" x 15 gauge prime steel outer tubing. 2-1/4" steel collar. 1" x 6" steel screw. Two 4" x 4" x 10 gauge steel plates. 7" turning handle. Grooved pin and plain pin. Flow coated with red corrosion-resistant paint. Packed with instructions. UPC symbol on carton. Maximum load capacity obtained at lowest extension. For new or old gates, up to 6 ft. width and any height. Prevents and eliminates gate sagging. Powder coated steel, robotics welded. Easy and quick to install. Includes 4 gate frames (2 hinged) and weather resistant screws.
Vestal 260 Brick Lintel Marshall JP55 Adjustable Extend-O-Post Jackpost Vestal 270 Brick Lintel
Unique forming process develops high cross strength. Ample load-bearing capacity. Stiff in service. Free from sagging or buckling. All lintels should be shored until mortar has cured. Coated with black corrosion-resistant paint. Made in USA. Use for supporting sagging floors, weak beams and warping stairways. 2-1/4" x 15 gauge prime steel inner tubing. 2-1/2" x 15 gauge prime steel outer tubing. 2-1/4" steel collar. 1" x 6" steel screw. Two 4" x 4" x 10 gauge steel plates. 7" turning handle. Grooved pin and plain pin. Flow coated with red corrosion-resistant paint. Packed with instructions. UPC symbol on carton. Maximum load capacity obtained at lowest extension. Unique forming process develops high cross strength. Ample load-bearing capacity. Stiff in service. Free from sagging or buckling. All lintels should be shored until mortar has cured. Coated with black corrosion-resistant paint. Made in USA.
Acorn NSR3418 Round Nail Stake Acorn BC214 Rod Chair Marshalltown TWR19 Tie Wire Reel
Used for securing wood and metal forms to the ground in all flatwork applications, for attaching screed bard holder clamps, for securing landscape timbers, surveying stakes, string line guides, etc. Support rebar in concrete slabs and foundations. Designed to fit both 3/8" and 1/2" rebar. Flat base design adds to stability of reinforcing while pouring concrete. Bag of 500. Constructed of light weight aluminum. Designed for left or right hand use. Large knob provides smooth operation. Accommodates all types of tie wire rolls. Fits any standard size belt.
Waddell 830-.3 Screw Hole Plug Waddell 840-.3 Screw Hole Button Waddell 840-.5 Screw Hole Button
Unfinished hardwood plugs. Unfinished hardwood buttons. Unfinished hardwood buttons.
Acorn BT174-5M Bar Tie Marshall JP79 Adjustable Extend-O-Post Jackpost Adjust-A-Gate Consumer Adjustable Gate Frame
Used to secure the position of rebar during concrete pouring. Use for supporting sagging floors, weak beams and warping stairways. 2-1/4" x 15 gauge prime steel inner tubing. 2-1/2" x 15 gauge prime steel outer tubing. 2-1/4" steel collar. 1" x 6" steel screw. Two 4" x 4" x 10 gauge steel plates. 7" turning handle. Grooved pin and plain pin. Flow coated with red corrosion-resistant paint. Packed with instructions. UPC symbol on carton. Maximum load capacity obtained at lowest extension. Ideal for repairing an old gate or building a new gate. Equipped with all necessary parts and installation hardware. Can be assembled on-site. Adjustable frame and truss system for quick installation with professional results for almost any application. All steel fade resistant frame prevents sagging and dragging. Create a double drive gate using 2 adjust a gates systems. 1-1/2'' square frame and hardware. Adjustable diagonal truss cable keeps gate straight. Fits 4', 5' and 6' high fences.
Marshall JP84 Adjustable Extend-O-Post Jackpost Acorn BT175-5M Bar Tie Acorn NSR3424 Round Nail Stake
Use for supporting sagging floors, weak beams and warping stairways. 2-1/4" x 15 gauge prime steel inner tubing. 2-1/2" x 15 gauge prime steel outer tubing. 2-1/4" steel collar. 1" x 6" steel screw. Two 4" x 4" x 10 gauge steel plates. 7" turning handle. Grooved pin and plain pin. Flow coated with red corrosion-resistant paint. Packed with instructions. UPC symbol on carton. Maximum load capacity obtained at lowest extension. Used to secure the position of rebar during concrete pouring. Used for securing wood and metal forms to the ground in all flatwork applications, for attaching screed bard holder clamps, for securing landscape timbers, surveying stakes, string line guides, etc.
V8414 SPEAR GATE KIT BLK 16IN STAKE NAIL ROUND 3/4X30IN     Acorn BT176-1M/5M Bar Tie
STAKE NAIL ROUND 3/4X30IN
Our Price: $65.28
Decorative spear design and with decorative material. Ideal for gates, sheds and garages. Instantly adds curb appeal to your home. Kit includes: 4 dummy hinges and 2 pulls. 16" dummy strap length. Used for securing wood and metal forms to the ground in all flatwork applications, for attaching screed bard holder clamps, for securing landscape timbers, surveying stakes, string line guides, etc. Used to secure the position of rebar during concrete pouring.
Acorn BC314 Rod Chair Marshall JP84HD Adjustable Extend-O-Post Jackpost Ad Tech TM22HD Dispensing Tool
Support rebar in concrete slabs and foundations. Designed to fit both 3/8" and 1/2" rebar. Flat base design adds to stability of reinforcing while pouring concrete. Bag of 500. Use for supporting sagging floors, weak beams and warping stairways. 2-1/2" x 14 gauge prime steel inner tubing. 2-3/4" x 14 gauge prime steel outer tubing. 2-1/2" steel collar. 1-1/4" x 6" steel screw. Two 4" x 6" x 7 gauge steel plates. 7" turning handle. Grooved pin and plain pin. Flow coated with red corrosion-resistant paint. Packed with instructions. UPC symbol on carton. Maximum load capacity obtained at lowest extension. Features an in-line rod system, combined with a specifically designed friction plate that results in exceptional force making dispensing faster and reducing worker exertion and fatigue. Double gripping plates and steel trigger for increased durability and performance. For 22 Oz. cartridges, but comes with adaptable parts which allow for 16 Oz. cartridges as well.
Marshall AC363/3637 Adjustable Round Column STAKE NAIL ROUND 3/4X36IN     Marshall AC369/3691 Adjustable Round Column
STAKE NAIL ROUND 3/4X36IN
Our Price: $78.85
3"OD 11 gauge (0.120 wall). 4" adjustment. Cold rolled steel screw. Turning bar provided with each post. Flow-coated inside and out with red corrosion-resistant paint. Heavy-duty cap and base plates slotted; holes to fit steel or wood beams. Embossed lugs grip posts firmly to avoid slipping. All parts are welded or wired together. Meets IRC and IBC Specifications Report No. CCRR-0145. Used for securing wood and metal forms to the ground in all flatwork applications, for attaching screed bard holder clamps, for securing landscape timbers, surveying stakes, string line guides, etc. 3"OD 11 gauge (0.120 wall). 4" adjustment. Cold rolled steel screw. Turning bar provided with each post. Flow-coated inside and out with red corrosion-resistant paint. Heavy-duty cap and base plates slotted; holes to fit steel or wood beams. Embossed lugs grip posts firmly to avoid slipping. All parts are welded or wired together. Meets IRC and IBC Specifications Report No. CCRR-0145.
Acorn BT178-5M Bar Tie Marshall AC386 Adjustable Round Column Marshall AC370/3704 Adjustable Round Column
Used to secure the position of rebar during concrete pouring. 3"OD 11 gauge (0.120 wall). 4" adjustment. Cold rolled steel screw. Turning bar provided with each post. Flow-coated inside and out with red corrosion-resistant paint. Heavy-duty cap and base plates slotted; holes to fit steel or wood beams. Embossed lugs grip posts firmly to avoid slipping. All parts are welded or wired together. Meets IRC and IBC Specifications Report No. CCRR-0145. 3"OD 11 gauge (0.120 wall). 4" adjustment. Cold rolled steel screw. Turning bar provided with each post. Flow-coated inside and out with red corrosion-resistant paint. Heavy-duty cap and base plates slotted; holes to fit steel or wood beams. Embossed lugs grip posts firmly to avoid slipping. All parts are welded or wired together. Meets IRC and IBC Specifications Report No. CCRR-0145.
Marshall AC373/3737 Adjustable Round Column Marshall AC390 Adjustable Round Column Marshall AC376/3760 Adjustable Round Column
3"OD 11 gauge (0.120 wall). 4" adjustment. Cold rolled steel screw. Turning bar provided with each post. Flow-coated inside and out with red corrosion-resistant paint. Heavy-duty cap and base plates slotted; holes to fit steel or wood beams. Embossed lugs grip posts firmly to avoid slipping. All parts are welded or wired together. Meets IRC and IBC Specifications Report No. CCRR-0145. 3"OD 11 gauge (0.120 wall). 4" adjustment. Cold rolled steel screw. Turning bar provided with each post. Flow-coated inside and out with red corrosion-resistant paint. Heavy-duty cap and base plates slotted; holes to fit steel or wood beams. Embossed lugs grip posts firmly to avoid slipping. All parts are welded or wired together. Meets IRC and IBC Specifications Report No. CCRR-0145. 3"OD 11 gauge (0.120 wall). 4" adjustment. Cold rolled steel screw. Turning bar provided with each post. Flow-coated inside and out with red corrosion-resistant paint. Heavy-duty cap and base plates slotted; holes to fit steel or wood beams. Embossed lugs grip posts firmly to avoid slipping. All parts are welded or wired together. Meets IRC and IBC Specifications Report No. CCRR-0145.
Marshall AC379/3791 Adjustable Round Column Marshall AC380/3804 Adjustable Round Column Marshall AC383/3837 Adjustable Round Column
3"OD 11 gauge (0.120 wall). 4" adjustment. Cold rolled steel screw. Turning bar provided with each post. Flow-coated inside and out with red corrosion-resistant paint. Heavy-duty cap and base plates slotted; holes to fit steel or wood beams. Embossed lugs grip posts firmly to avoid slipping. All parts are welded or wired together. Meets IRC and IBC Specifications Report No. CCRR-0145. 3"OD 11 gauge (0.120 wall). 4" adjustment. Cold rolled steel screw. Turning bar provided with each post. Flow-coated inside and out with red corrosion-resistant paint. Heavy-duty cap and base plates slotted; holes to fit steel or wood beams. Embossed lugs grip posts firmly to avoid slipping. All parts are welded or wired together. Meets IRC and IBC Specifications Report No. CCRR-0145. 3"OD 11 gauge (0.120 wall). 4" adjustment. Cold rolled steel screw. Turning bar provided with each post. Flow-coated inside and out with red corrosion-resistant paint. Heavy-duty cap and base plates slotted; holes to fit steel or wood beams. Embossed lugs grip posts firmly to avoid slipping. All parts are welded or wired together. Meets IRC and IBC Specifications Report No. CCRR-0145.
Adjust-A-Gate Original Adjustable Gate Frame Adjust-A-Gate Original Adjustable Gate Frame Deacero 5689/RBTW35 Coil Tie Wire
Ideal for repairing an old gate or building a new gate. Equipped with all necessary parts and installation hardware. Can be assembled on-site. Adjustable frame and truss system for quick installation with professional results for almost any application. All steel fade resistant frame prevents sagging and dragging. Create a double drive gate using 2 adjust a gates systems. 1-1/2'' square frame and hardware. Adjustable diagonal truss cable keeps gate straight. Fits 4', 5' and 6' high fences. Ideal for repairing an old gate or building a new gate. Equipped with all necessary parts and installation hardware. Can be assembled on-site. Adjustable frame and truss system for quick installation with professional results for almost any application. All steel fade resistant frame prevents sagging and dragging. Create a double drive gate using 2 adjust a gates systems. 1-1/2'' square frame and hardware. Adjustable diagonal truss cable keeps gate straight. Fits 4', 5' and 6' high fences. Center hole (semi-square with round corners) enables roll to be quickly reversed for right or left hand use. Roll slips quickly onto the reel, yet easily rewinds. Continuous rolls and uniform diameters. Ideal to tie rods. Meets ASTM-A-853. 16.5 gauge. 3.5 pound coil.
   
 
1