Home > HARDWARE > BUILDERS HARDWARE > BRACES > BED FRAME RAIL CLIP
Sort By:
1
Mintcraft FC-Z015-01 Flat Corner Brace National Hardware 117BC3 Flat Corner Brace Chef Craft 20031 Plate Holder
Use on wood in both the indoors and outdoors. Reinforces flat, right angle corner joints. Rust resistant. National Hardware Corner Brace, Flat, Series: 117BC3, 3-1/2 in Length, 5/8 in Width, 0.07 in Thickness, 0.24 in Diameter Mounting Hole, Steel, Zinc Plated, Includes: Screws, BHMA A138.18, For Chests, Screens and Windows Fits all sizes. Blister pack.
Stanley 121087 Clothesline Hook InterDesign 16101 Over-The-Door Hook Knape & Vogt CD-0019 Closet Pole End Cap
Plate-style hook is designed for installing clotheslines, tie-downs for tarps, etc. For interior and exterior applications. Manufactured from hot-rolled steel plate and steel wire White plastic, packaged on pegable card. Covers up pole ends, keeps hangers from sliding off, friction fit. For use with 1-1/4" diameter pole (except 0023 uses 1" diameter pole).
SCREW WOOD BLACK NO7X3/4IN    SCREW WOOD BLACK NO8X3/4IN    SCREW WOOD BLACK NO9X3/4IN
Heavy duty reinforcement. Reinforce a variety of joints, seams and cracks. Designed for use with black reinforcement Items with round recessed holes sized for #7 screws. Black powder coated heads to give decorative reinforcement pieces a finished look. Use cross recess screwdriver size #2. Visual-pack. National Hardware Wood Screw, Series: SCRFLT, NO 8 x 3/4 Screw, Flat Head, Phillips Drive, Black National Hardware Wood Screw, Series: SCRFLT, NO 9 x 3/4 Screw, Flat Head, Phillips Drive, 14 TPI Full Length Thread, 11/32 in Dia Head, Steel, Black
Stanley 266445 T-Plate Stanley 116BC T-Plate 4 in L x 3/4 in W x 4 in H x 0.07 in T National Hardware V858S Lag Screw
Use #8 flat head screws. Designed to join two pieces of wood together at 90 degree angles, such as on screens and frames. Screw holes are countersunk. Drill a pilot hole with a 3/32" sized drill bit when using wood screws. Use #8 flat head screws. Designed to join two pieces of wood together at 90 degree angles, such as on screens and frames. Screw holes are countersunk. Drill a pilot hole with a 3/32" sized drill bit when using wood screws. National Hardware Lag Screw, Series: V858S, 5/16 in Screw, 1-1/2 in Length, Hexagonal Head, Gimlet Point, Steel, Zinc Plated, Satin Black, BHMA A138.18 Certified
National Hardware V286S Wood Screw National Hardware V286S Wood Screw National Hardware 21BC Replacement Gate Latch Bar
National Hardware Wood Screw, Series: V286S, NO 12 Screw, 1-1/4 in Length, Flat Head, Steel, Zinc Plated, BHMA A138.18 Certified National Hardware Wood Screw, Series: V286S, NO 12 Screw, 1-1/4 in Length, Flat Head, Phillips Drive, Steel, Black, BHMA A138.18 National Hardware Gate Latch Bar, Replacement, Series: 21BC, 4 in Overall Height, Suitable For Use With: Self-Closing Gate Latches, Steel, Zinc Plated, BHMA A138.18
BOLT LAG BLACK 1/4X1-1/2IN    BRACE CORNER FLT STL 2X3/8 ZN BRACE CNR FLT STL 2-1/2X1/2 ZN
National Hardware Lag Bolt, Series: V1863, Heavy Duty, 1/4 in Thread, 1-1/2 in Overall Length, Hex Head, 3/16 in Height x 10 mm Width Head, Steel, Powder Coated, Black Use on wood in both the indoors and outdoors. Reinforces flat, right angle corner joints. Rust resistant. Use on wood in both the indoors and outdoors. Reinforces flat, right angle corner joints. Rust resistant.
PLATE HANGER 5-7IN POL BRASS  PLATE HANGER 8-11IN POL BRASS Hillman 50471 Deluxe Plate Hanger
Includes a picture hanger for Installation. Includes a picture hanger for Installation. 30 pound professional picture hanger included.
BOLT LAG BLACK 5/16X1-1/2IN   BRACE CNR FLT STL 1-1/2X3/8 ZN Hillman 50472 Deluxe Plate Hanger
National Hardware Lag Bolt, Series: V1863, Heavy Duty, 5/16 in Thread, 1-1/2 in Overall Length, Hex Head, 7/32 in Height x 1/2 in Width Head, Steel, Powder Coated, Black Use on wood in both the indoors and outdoors. Reinforces flat, right angle corner joints. Rust resistant. 30 pound professional picture hanger included.
Prime Line U 9006 Bed Frame Large Rail Clamp Prime Line U9005 Bed Frame Small Rail Clamp BOLT LAG BLACK 3/8X1-1/2IN
Heavy gauge steel bracket is used to hold steel bed frame meeting rails together; fits most standard bed frames. Zinc plated. Heavy gauge steel bracket is used to hold steel bed frame meeting rails together; fits most standard bed frames. Zinc plated. National Hardware Lag Bolt, Series: V1863, Heavy Duty, 3/8 in Thread, 1-1/2 in Overall Length, Hex Head, 1/4 in Height x 9/16 in Width Head, Steel, Powder Coated, Black
National Hardware V117 Flat Corner Brace T-PLATE STEEL 3X3IN ZINC PLTD National Hardware V117 Flat Corner Brace
National Hardware Corner Brace, Flat, Series: V117, 1-1/2 in Length, 3/8 in Width, 1-1/2 in Height, 0.07 in Thickness, 0.19 in Diameter Mounting Hole, Steel, Zinc Plated, Includes: Screws, BHMA A138.18, For Chests, Screens, Windows and Furniture Reinforces flat surface joints, seams and cracks. Can be used to repair furniture. National Hardware Corner Brace, Flat, Series: V117, 1-1/2 in Length, 3/8 in Width, 1-1/2 in Height, 0.07 in Thickness, 4 Mounting Holes, 0.19 in Diameter Mounting Hole, Hot Rolled Steel, Bright Brass, Includes: Screws, For Reinforcing Corners on Chests Screens and Windows
National Hardware V417 Flat Corner Brace National Hardware V117 Flat Corner Brace BRACE CNR FLT STL 3INX1/2IN ZN
National Hardware Corner Brace, Flat, Series: V417, 2 in Length, 3/8 in Width, 2 in Height, Stainless Steel, BHMA A138.18, For Chests, Screens and Windows National Hardware Corner Brace, Flat, Series: V117, 2 in Length, 3/8 in Width, 2 in Height, 0.07 in Thickness, 4 Mounting Holes, 0.19 in Diameter Mounting Hole, Hot Rolled Steel, Zinc Plated, Includes: Screws, BHMA A138.18, For Reinforcing Corners on Chests Screens and Windows Use on wood in both the indoors and outdoors. Reinforces flat, right angle corner joints. Rust resistant.
HINGE GATE HD ZN PLT STL 3-1/2 Hillman 50470 Deluxe Plate Hanger National Hardware V117 Flat Corner Brace
30 pound professional picture hanger included. National Hardware Corner Brace, Flat, Series: V117, 2 in Length, 3/8 in Width, 2 in Height, 0.07 in Thickness, 4 Mounting Holes, 0.19 in Diameter Mounting Hole, Hot Rolled Steel, Bright Brass, Includes: Screws, For Reinforcing Corners on Chests Screens and Windows
National Hardware V288 Hinge Hasp PULL SS                       National Hardware V117 Flat Corner Brace
HINGE HASPS 3IN ZN PLT
Our Price: $4.24
National Hardware Hinge Hasp, Series: V288, 3/4 in Height Shackle, 5-1/4 in Length, 1-5/32 in Height, Hot Rolled Steel, Aluminum Pin, Zinc Plated, BHMA A138.18 Certified, 3 in, For Regular or Around the Corner Applications Ideal for opening gate latch from opposite side of latch. Visual-pack. National Hardware Corner Brace, Flat, Series: V117, 2-1/2 in Length, 1/2 in Width, 2-1/2 in Height, 0.07 in Thickness, 4 Mounting Holes, 0.22 in Diameter Mounting Hole, Hot Rolled Steel, Zinc Plated, Includes: Screws, BHMA A138.18, For Reinforcing Corners on Chests Screens and Windows
National Hardware V116 T Plate HINGE GATE PIPE ZN PLT 1-5/8IN HINGE GATE PIPE ZNC PLATED 2IN
TPLATES 3X3IN ZN PLT
Our Price: $4.38
National Hardware T Plate, Series: V116, 3 in Length, 3 in Width, 0.07 in Thickness, 3 Mounting Holes, 1/4 in Diameter Mounting Hole, Steel, Zinc Plated, BHMA A138.18
PLATE HANGER 14-18IN POL BRASS National Hardware BPB21 Gate Latch Interdesign 6530 Accessory Hook
Includes a picture hanger for Installation. National Hardware Gate Latch, Automatic, Series: BPB21, 4.44 in Overall Height, 2.37 in Overall Depth, Gate, Post Mounting, 0.22 in Diameter Mounting Hole, Suitable For Use With: Out Swing Gates, Doors and Animal Pens, Steel, Zinc Plated, Includes: Mounting Screws, BHMA A138.18 Plated steel wire, ideal for hanging multiple items. Packaged with hang tab.
HANGER CLOSET ACCESSORY LOOP  BRACE CORNER  4.5X1.5X1/8 BLK National Hardware V117 Flat Corner Brace
InterDesign Over The Rod Accessory Hook, Series: Classico, Rod Mounting, Steel, Bronze, For Hanging Storage Used to reinforce 90 degree angles by applying to the side of the angle. Slots for 5/16" Carriage Bolt. Black powder coat finish for improved weather resistance. National Hardware Corner Brace, Flat, Series: V117, 3 in Length, 1/2 in Width, 3 in Height, 0.07 in Thickness, 4 Mounting Holes, 0.22 in Diameter Mounting Hole, Hot Rolled Steel, Zinc Plated, Includes: Screws, BHMA A138.18, For Reinforcing Corners on Chests Screens and Windows
Decko 38500 Adjustable Over-The Door Hanger Stanley 1161BC T-Plate 6 in L x 1-1/2 in W x 5 in H x 0.07 in T National Hardware V117 Flat Corner Brace
Chrome plated for durability. Scratch and rust resistant. Has snap-out spacer to adjust from 1-3/8" to 1-7/8". Easy to install. Hardware included. 14" length. Use 3/8" bolts and/or 16d nails. Used to support the joining of a cross beam with a support beam by application to the side. FoUr superior strength plates should be used on both sides of the joint with through bolts. National Hardware Corner Brace, Flat, Series: V117, 2-1/2 in Length, 1/2 in Width, 2-1/2 in Height, 0.07 in Thickness, 4 Mounting Holes, 0.22 in Diameter Mounting Hole, Hot Rolled Steel, Bright Brass, Includes: Screws, For Reinforcing Corners on Chests Screens and Windows
BRACE CORNER  6.5X1.5X1/8 BLK HINGE GATE HD BLK STL 3-1/4   National Hardware N223-875 Extra Heavy Gate Hinge
Used to reinforce 90 degree angles by applying to the side of the angle. Slots for 5/16" Carriage Bolt. Black powder coat finish for improved weather resistance. National Hardware Gate Hinge, Extra Heavy, Series: 287BC, Suitable For Use With: 2 X 4 or 4 X 4 Posts, 0.1 in Leaf Thickness, 4-1/4 in Gate Leaf, 3.05 in Frame Leaf Length, 0.326 in Pin, Fasteners: NO 12 Flat Head C-Sunk Screw, 48 lb Load Capacity, 4-1/4 in Overall Length, 4.8 in Overall Width, Hot Rolled Steel, Zinc Plated, BHMA A138.18, For Gates
National Hardware V288 Hinge Hasp LATCH GATE OUTSWING STL ZN PLT DOOR/GATE PITCHER PULL BLK STL
HINGE HASPS 4IN ZN PLT
Our Price: $5.32
National Hardware Hinge Hasp, Series: V288, 3/4 in Height Shackle, 6-1/4 in Length, 1-1/4 in Height, Hot Rolled Steel, Aluminum Pin, Zinc Plated, BHMA A138.18 Certified, 4 in, For Regular or Around the Corner Applications Provides security on inward and outward swinging doors and gates . Self latching finger tip release with cord or wire. Use padlock for added security. Screws included. Adds decorative design to doors and gates. Durable.
National Hardware V2 Ornamental Pull T-PLATE STEEL 4X4IN ZINC PLTD BRACE CNR FLT STL 3-1/2X5/8 ZN
PULLS 6-1/2IN BLK
Our Price: $5.40
National Hardware Ornamental Pull, Series: V2, Suitable For Use With: Gates, Cabinets, Doors and Drawers, 6-1/2 in Length, 1-1/4 in Width, Steel, Black, Zinc Plated, Includes: Mounting Lags, BHMA A138.18 Reinforces flat surface joints, seams and cracks. Can be used to repair furniture. Use on wood in both the indoors and outdoors. Reinforces flat, right angle corner joints. Rust resistant.
National Hardware V417 Flat Corner Brace National Hardware V117 Flat Corner Brace National Hardware V116 T Plate
TPLATES 4X4IN ZN PLT
Our Price: $5.75
National Hardware Corner Brace, Flat, Series: V417, 3 in Length, 1/2 in Width, 3 in Height, Stainless Steel, BHMA A138.18, For Chests, Screens and Windows National Hardware Corner Brace, Flat, Series: V117, 3-1/2 in Length, 0.62 in Width, 3-1/2 in Height, 0.07 in Thickness, 4 Mounting Holes, 0.24 in Diameter Mounting Hole, Hot Rolled Steel, Zinc Plated, Includes: Screws, BHMA A138.18, For Reinforcing Corners on Chests Screens and Windows National Hardware T Plate, Series: V116, 4 in Length, 4 in Width, 0.07 in Thickness, 3 Mounting Holes, 1/4 in Diameter Mounting Hole, Steel, Zinc Plated, BHMA A138.18
LATCH GATE UNIV ZN PLATED STL ROD CLOSET ADJ 30-48IN SILVER LATCH GATE UNIV PWDR COAT BLCK
For inward and outward swinging doors and gates. Use with padlock for added security. Screws included. Rods sized 48" to 72" and 72" to 120" includes 1-piece central support, and rods sized 96" to 150" include 2-piece central support. For inward and outward swinging doors and gates. Use with padlock for added security. Screws included. Powder coated black.
Knape & Vogt RP0022-18/30 Adjustable Closet Rod National Hardware V21 Gate Latch LATCH GATE OUTSWING BLK
1-1/4" diameter. National Hardware Gate Latch, Automatic, Series: V21, 4.44 in Overall Height, 2.37 in Overall Depth, Gate, Post Mounting, 0.22 in Diameter Mounting Hole, Suitable For Use With: Out Swing Gates, Doors and Animal Pens, Steel, Zinc Plated, Includes: Mounting Screws, BHMA A138.18 Provides security on inward and outward swinging doors and gates . Self latching finger tip release with cord or wire. Use padlock for added security. Screws included.
ROD CLOSET ADJ 18-30IN SILVER National Hardware N100-057 Ornamental Pull Orbinni 76500 Over-The-Door Hook
PULLS 8-3/4IN BLK
Our Price: $6.16
Rods sized 48" to 72" and 72" to 120" includes 1-piece central support, and rods sized 96" to 150" include 2-piece central support. National Hardware Ornamental Pull, Series: V3, Suitable For Use With: Gates, Cabinets, Doors and Drawers, 8-3/4 in Length, Steel, Black, Zinc Plated, Includes: Mounting Lags, BHMA A138.18 Chrome-plated. Ideal for bedroom and bedroom closets for purses, scarves, clothes, jackets, towels and more. Fits over top of any standard-thickness interior door.
GATE PULL ORNAMT 10IN BLK STL National Hardware V417 Flat Corner Brace National Hardware V117 Flat Corner Brace
Adds decorative design to doors and gates. National Hardware Corner Brace, Flat, Series: V417, 4 in Length, 3/4 in Width, 4 in Height, Stainless Steel, BHMA A138.18, For Chests, Screens and Windows National Hardware Corner Brace, Flat, Series: V117, 4 in Length, 3/4 in Width, 4 in Height, 0.07 in Thickness, 4 Mounting Holes, 1/4 in Diameter Mounting Hole, Hot Rolled Steel, Zinc Plated, Includes: Screws, BHMA A138.18, For Reinforcing Corners on Chests Screens and Windows
National Hardware BPB21 Gate Latch Stanley 275487 Pipe Gate Hinge ROD CLOSET BRT 18-30IN
National Hardware Gate Latch, Automatic, Series: BPB21, 4.44 in Overall Height, 2.37 in Overall Depth, Gate, Post Mounting, 0.22 in Diameter Mounting Hole, Suitable For Use With: Out Swing Gates, Doors and Animal Pens, Steel, Black, Includes: Mounting Screws, BHMA A138.18 Designed as replacement hinge for tubular pipe gates. 1-5/8" hinge for 5/8" size and 2" hinge for 3/4" size. Used to hang clothes and other items. Tubes are made with lock seam construction for strength.  Ends align for easy installation. Visual-pack.
Knape & Vogt 0018-4WT3 1-Piece 3 Pole Closet Rod National Hardware N223-867 Extra Heavy Gate Hinge National Hardware V22 Gate Latch
GATE HINGES 3-1/2IN BLK
Our Price: $6.80
1-1/4" Diameter. National Hardware Gate Hinge, Extra Heavy, Series: 287BC, Suitable For Use With: 2 X 4 or 4 X 4 Posts, 0.1 in Leaf Thickness, 4-1/4 in Gate Leaf, 3.05 in Frame Leaf Length, 0.326 in Pin, Fasteners: NO 12 Flat Head C-Sunk Screw, 48 lb Load Capacity, 4-1/4 in Overall Length, 4.8 in Overall Width, Hot Rolled Steel, Black, BHMA A138.18, 3-1/2 in Size National Hardware Gate Latch, Automatic, Series: V22, Gate, Post Mounting, Suitable For Use With: Out Swing Gates, Doors and Animal Pens, Steel, Zinc Plated, Includes: Mounting Screws, BHMA A138.18
HINGE HASP ZINC PLATED 6IN    BRACE CNR FLT STL 4INX5/8IN ZN HANGER SCARF 8 LOOP CHROME
HINGE HASPS 6IN ZN PLT
Our Price: $7.01
Stanley Hinge Hasp, Series: V288, 1 Locking Holes, 6 in Length, Hot Rolled Steel, Zinc-Plated, For Regular or Around The Corner Applications Use on wood in both the indoors and outdoors. Reinforces flat, right angle corner joints. Rust resistant. InterDesign Scarf Hanger, Series: Classico, 13 in Length, 1/2 in Width, 9-3/4 in Height, 8 Hooks, Steel, Silver, Chrome, For Hanging and Organizing Scarves
HANGER SCARF 8 LOOP BRONZE    National Hardware V21 Gate Latch National Hardware V21 Gate Latch
InterDesign Scarf Hanger, Series: Classico, 13 in Length, 9-3/4 in Height, 8 Hooks, Steel, Black, Bronze, For Hanging Scarves, Wraps and Ties National Hardware Gate Latch, Automatic, Series: V21, 4.44 in Overall Height, 2.37 in Overall Depth, Gate, Post Mounting, 0.22 in Diameter Mounting Hole, Suitable For Use With: Out Swing Gates, Doors and Animal Pens, Steel, White, Includes: Mounting Screws National Hardware Gate Latch, Automatic, Series: V21, 4.44 in Overall Height, 2.37 in Overall Depth, Gate, Post Mounting, 0.22 in Diameter Mounting Hole, Suitable For Use With: Out Swing Gates, Doors and Animal Pens, Steel, Black, Includes: Mounting Screws, BHMA A138.18
BIN FABRIC LARGE MOCHA        BIN FABRIC LARGE BROWN        PULL BLACK 9-1/10IN
PULLS 9-1/10IN BLK
Our Price: $7.28
Outside dimensions: 6.9"H x 8"W x 11"D. Features write-on label. Outside dimensions: 6.9"H x 8"W x 11"D. Features write-on label. National Hardware Door Pull, Series: V4847, Contemporary, 9-1/10 in Length, Steel, Black, Satin Nickel, Includes: Fasteners, Standards: BHMA A138.18, For Gates, Sheds and Doors
BOLT LAG BLACK 1/2X3IN        ROD CLOSET ADJ 18-30IN WHITE  T-PLATE STEEL 5X5IN ZINC PLTD
LAG BOLT 1/2X3IN BLK
Our Price: $7.42
National Hardware Lag Bolt, Series: V1863, Heavy Duty, 1/2 in Thread, 3 in Overall Length, Hex Head, 5/16 in Height x 3/4 in Width Head, Steel, Powder Coated, Black Rods sized 48" to 72" and 72" to 120" includes 1-piece central support, and rods sized 96" to 150" include 2-piece central support. Reinforces flat surface joints, seams and cracks. Can be used to repair furniture.
PULL BLACK 8-1/2IN            Knape & Vogt RP0021-18/30 Adjustable Closet Rod LATCH BOLT SLID ZN PLTD STEEL
Design for a variety of applications. Hex lags included for mounting. Triple protected finish for extra corrosion protection. Visual-pack. 1-1/4" diameter. White finish. Use on inward and outward swinging doors and gates. Use padlock for added security.
BRACE CORNER GALV 2X3/8IN     National Hardware V21A MaxLatch Self-Adjusting Gate Latch Homebasix SS-HG3-50-PE-3L Garment Racks
Hole sizes fit Phillips Flat Screws sized #5. Drill a pilot hole with a 5/64" sized drill bit when using wood screws. Designed to reinforce corners on chests screens, windows, etc. Screw holes are countersunk. Visual-pack. National Hardware Gate Latch, Automatic, Self-Adjusting, Series: V21A, MaxLatch, Gate, Post Mounting, Stainless Steel, Zinc Plated, Includes: Mounting Screws, BHMA A138.18 Ideal for hanging clothes or towels. Fits the top of most standard household doors. 20"W x 11-3/8"H x 3'D.
Homebasix 05000862P Closet Drawer Homebasix 05000862N Closet Drawer Orbinni 76600 Over-The-Door Valet
Size: 11" x 10-1/2" x 10-1/2". Size: 11" x 10-1/2" x 10-1/2". Bright chrome finish valet mounts over door in seconds.
Homebasix SS-HG6-50-PE-3L Garment Racks BRACE CORNER 6X3X1/8 BLK STL  Knape & Vogt RP0022-30/48 Adjustable Closet Rod
Ideal for hanging clothes or towels. Fits the top of most standard household doors. Used to reinforce 90 degree angles with miter joint by applying to the side of the angle. 5/8" diameter hole. Plate width and bolt hole locations provide options for structural support. Black powder coat finish for improved weather resistance. 1-1/4" diameter.
ROD CLOSET BRT 30-48IN        Interdesign 6560 CLC Vertical Tie/Belt Rack Inter-Design 06561 Classico Vertical Tie/Belt Rack
Used to hang clothes and other items. Tubes are made with lock seam construction for strength.  Ends align for easy installation. Visual-pack. Plated steel wire to hang ties, belts, scarves, etc. Packaged with hang tab. Interdesign Vertical Tie/Belt Rack, Classico, 16 Hooks, Steel, Bronze
HASP SAFETY KYD 3-1/2 CHROME  LATCH BAR GATE HD ZN PLTD     National Hardware V1134 Sliding Bolt Door/Gate Latch
Locks with a key for added security. Includes 2 keys. No padlock required. National Hardware Door/Gate Latch, Sliding Bolt, Series: V1134, 6.19 in Overall Height, Suitable For Use With: Left or Right Hand Swinging Doors, Sliding Doors and Gates, Steel, Zinc Plated, Includes: Carriage Bolts and Screws, BHMA A138.18
Stanley 275495 Pipe Gate Hinge BRACE CNR FLT STL 5INX7/8IN ZN National Hardware V1134 Sliding Bolt Door/Gate Latch
DOOR/GATE LATCHES BLK
Our Price: $8.92
Designed as replacement hinge for tubular pipe gates. 1-5/8" hinge for 5/8" size and 2" hinge for 3/4" size. Use on wood in both the indoors and outdoors. Reinforces flat, right angle corner joints. Rust resistant. National Hardware Door/Gate Latch, Sliding Bolt, Series: V1134, 6.19 in Overall Height, Suitable For Use With: Left or Right Hand Swinging Doors, Sliding Doors and Gates, Steel, Black, Includes: Carriage Bolts and Screws, BHMA A138.18
National Hardware V21A MaxLatch Self-Adjusting Gate Latch National Hardware V827 Keyed Hasp Lock Closetmaid 8711-17 Drawer
National Hardware Gate Latch, Automatic, Self-Adjusting, Series: V21A, MaxLatch, Gate, Post Mounting, Stainless Steel, Black, Includes: Mounting Screws, BHMA A138.18 National Hardware Hasp Lock, Keyed, Series: V827, 1.61 in Length X 1.61 in Width X 1.16 in Height Shackle, 6 in Length, 1.6 in Height, Die Cast Zinc, Chrome Plated, 4-1/2 in, For Securing a Wide Variety of Doors, Cabinets, Boxes and Trunks Provides storage space. Fits into most cubical storage units. Size: 11"H x 11"W x 11"D.
Closetmaid 877-17 Drawer Closetmaid 434-17 Drawer Closetmaid 786 Drawer
Provides storage space. Fits into most cubical storage units. Size: 11"H x 11"W x 11"D. Provides storage space. Fits into most cubical storage units. Size: 11"H x 11"W x 11"D. Provides storage space. Fits into most cubical storage units. Size: 11"H x 11"W x 11"D.
Closetmaid 784 Drawer Closetmaid 8699-17 Drawer Closetmaid 8700-17 Drawer
Provides storage space. Fits into most cubical storage units. Size: 11"H x 11"W x 11"D. Provides storage space. Fits into most cubical storage units. Size: 11"H x 11"W x 11"D. Provides storage space. Fits into most cubical storage units. Size: 11"H x 11"W x 11"D.
National Hardware VKA827 Keyed Hasp Lock CAP END WHITE                 DRAWER FABRIC BLUE 11IN HEIGHT
END CAP WHITE
Our Price: $9.16
National Hardware Hasp Lock, Keyed, Series: VKA827, 4-1/2 in Length, Steel, Chrome Plated, 4-1/2 in, For Securing a Wide Variety of Doors, Cabinets, Boxes and Trunks Used to cover the ends of closet rods while adding a decorative touch. Prevents hangers from sliding off the wall. Fits 1-1/4 in. to 1-5/16 in. diameter pole. Includes set screws to secure the end cap to the closet rod. Provides storage space. Fits into most cubical storage units. Size: 11"H x 11"W x 11"D.
Stanley 1177BC Flat Corner Plate National Hardware N101-220 Adjust-O-Matic Gate Latch LATCH ORN DOOR/GATE BLACK
Used to support a 90 degree angle by application to the side. For superior strength plates should be used on both sides of the joint with through bolts. National Hardware Gate Latch, Automatic, Series: V21A, Adjust-O-Matic, 4-1/2 in Overall Width, 2.37 in Overall Depth, Suitable For Use With: In-Swing Doors, Steel, Black, Includes: Screws, BHMA A138.18, 4 in Size Designed for left or right hand swinging or sliding doors and gates. Includes surface mount and 90 degree strike plate option. Can be padlocked for added security. Bagged.
HINGE GATE BLACK BLACK        Knape & Vogt RP0021-30/48 Adjustable Closet Rod HANGER SCARF AXIS CHROME18LOOP
Designed for applications with narrow mounting surfaces, such as gates, barn and shed doors, storage bins, and tool boxes. Bearing design eliminates metal to metal contact for smooth, quiet operation. Bagged. 1-1/4" diameter. White finish. Snag-free, continuous loop design. No installation needed, simply store and hang. Hang scarves, ties, and more. Size: 11.5" x .5" x 9.5".
HANGER SCARF AXIS BRONZE18LOOP RACK OVER DOOR 3 HOOK CHROME  RACK OVER DOOR 3 HOOK BRONZE
Snag-free, continuous loop design. No installation needed, simply store and hang. Hang scarves, ties, and more. Size: 11.5" x .5" x 9.5". InterDesign Over The Rod Hook, Series: Classico, 4-1/2 in Width, 10-3/4 in Length, 3 Hooks, Door Mounting, Steel, Chrome, For Jackets, Towels, Robes, Scarves, Ties, Belts and Other Clothing Accessories InterDesign Over The Rod Hook, Series: Classico, 4-1/2 in Width, 10-3/4 in Length, 3 Hooks, Door Mounting, Steel, Bronze, For Jackets, Towels, Robes, Scarves, Ties, Belts and Other Clothing Accessories
HINGE GATE HD M GLV STL 3-1/3 HASP SAFETY KYD 4-1/2 CHROME  National Hardware V836 Cane Bolt
Locks with a key for added security. Includes 2 keys. No padlock required. National Hardware Cane Bolt, Series: V836, 1/2 in Diameter, 12 in Overall Height, Wall Mounting, 0.94 in Mounting Hole, Suitable For Use With: Single or Double Doors and Gates in the Open or Closed Position, Hot Rolled Steel, Zinc Plated, Includes: Mounting Hardware, BHMA A138.18, For Vertical or Horizontal Applications
BRACE CORNER GALV 3X1/2IN     CAP END CHRM FIN              CAP END ORB FIN
END CAP CHROME FINISH
Our Price: $9.86
END CAP ORB FINISH
Our Price: $9.86
Hole sizes fit Phillips Flat Screws sized #5. Drill a pilot hole with a 5/64" sized drill bit when using wood screws. Designed to reinforce corners on chests screens, windows, etc. Screw holes are countersunk. Visual-pack. Used to cover the ends of closet rods while adding a decorative touch. Prevents hangers from sliding off the wall. Fits 1-1/4 in. to 1-5/16 in. diameter pole. Includes set screws to secure the end cap to the closet rod. Used to cover the ends of closet rods while adding a decorative touch. Prevents hangers from sliding off the wall. Fits 1-1/4 in. to 1-5/16 in. diameter pole. Includes set screws to secure the end cap to the closet rod.
Knape & Vogt RP0022-48/72 Adjustable Closet Rod LATCH BOLT SLIDE BLACK STEEL  CAP END STN NKL FN
END CAP STN NCKL FINISH
Our Price: $10.54
1-1/4" diameter. Use on inward and outward swinging doors and gates. Use padlock for added security. Used to cover the ends of closet rods while adding a decorative touch. Prevents hangers from sliding off the wall. Fits 1-1/4 in. to 1-5/16 in. diameter pole. Includes set screws to secure the end cap to the closet rod.
Prime Line U 9951 Keyed Hasp National Hardware V836 Cane Bolt National Hardware N101-295 Adjust-O-Matic Gate Latch
CANE BOLTS 1/2X12IN BLK
Our Price: $10.70
Steel hasp hinges over die-cast locking mechanism. Twist keyed knob to lock and use key to unlock. Hasp cover screws when in locked position. Includes 1 hasp, 1 locking mechanism, 2 keys and 1 set of installation screws. Prefix U on factory number denotes new Defender Security packaging. National Hardware Cane Bolt, Series: V836, Suitable For Use With: Single or Double Doors and Gates in the Open or Closed Position, 1/2 in Diameter X 12 in Length, Hot Rolled Steel, Black, Includes: Mounting Hardware, BHMA A138.18 National Hardware Gate Latch, Automatic, Series: V21A, Adjust-O-Matic, 4-1/2 in Overall Width, 2.37 in Overall Depth, Steel, Black, BHMA A138.18, 6 in Size
Knape & Vogt 0018-6WT3 1-Piece 3 Pole Closet Rod ROD CLOSET WHITE 30-48IN      BRACE CNR FLAT STEEL 8IN ZINC
ROD CLOSET WHITE 30-48IN
Our Price: $11.18
1-1/4" Diameter. PermaSeam design consists of two structurally strong rolled shapes which telescope for easy adjustment. Closet rods exceed ANSI/BHMA A156.16 Deflection Standards when installed with center supports. Use on wood in both the indoors and outdoors. Reinforces flat, right angle corner joints. Rust resistant.
ROD CLOSET ADJ 48-72IN SILVER ROD CLOSET ADJ 30-48IN WHITE  Mintcraft FC-Z06-01 Flat Corner Brace
Rods sized 48" to 72" and 72" to 120" includes 1-piece central support, and rods sized 96" to 150" include 2-piece central support. Rods sized 48" to 72" and 72" to 120" includes 1-piece central support, and rods sized 96" to 150" include 2-piece central support. Use on wood in both the indoors and outdoors. Reinforces flat, right angle corner joints. Rust resistant.
National Hardware 859BC10 Ornamental T Hinge HINGE GATE BLACK 4IN          ROD CLOSET BRT 48-72IN
GATE HINGES 10IN BLK
Our Price: $11.94
ROD CLOSET BRT 48-72IN
Our Price: $12.01
National Hardware T Hinge, Ornamental, Series: 859BC10, 40 lb Load Capacity, 10 in Overall Length, Steel, Black, Zinc Plated, BHMA A138.18 For full surface applications. Designed for gates, doors, cabinets and sheds.  Bearing design eliminates metal to metal contact for smooth, quiet operation. Decorative design. Tight pin allows for right or left hand applications. Lags matching finish are included for mounting. Manufactured from hot-rolled steel. Visual-pack. Used to hang clothes and other items.Tubes are made with lock seam construction for strength.
National Hardware V29 Gate Latch BOLT CANE BLACK STEEL 12IN    Homebasix HK06-CH Garment Hook & Rack
AUTOMATIC GATE LATCHES SS
Our Price: $12.02
National Hardware Gate Latch, Automatic, Universal, Series: V29, Suitable For Use With: Out Swing Gates, Doors and Animal Pens, Stainless Steel, Stainless Steel, Includes: Mounting Screws, BHMA A138.18 Can be used to lock gates or to keep gates open . Can be installed horizontally or vertically. Bolt can be kept in raised position when applied vertically. Ideal for hanging clothes or towels. Fits the top of most standard household doors. Chrome finish. Size: 8-3/4"W x 9-1/2"H x 3"D.
Stanley 1162BC T-Plate 12 in L x 2 in W x 8 in H x 1/8 in T National Hardware V21 Gate Latch BRACE CORNER GALV 4X3/4IN
TPLATES 12X8X1/8IN BLK
Our Price: $12.22
Used to support the joining of a cross beam with a support beam by application to the side. Four superior strength plates should be used on both sides of the joint with through bolts. National Hardware Gate Latch, Automatic, Series: V21, 4.44 in Overall Height, 2.37 in Overall Depth, Gate, Post Mounting, 0.22 in Diameter Mounting Hole, Suitable For Use With: Out Swing Gates, Doors and Animal Pens, Steel, Galvanized, Includes: Mounting Screws, BHMA A138.18 Hole sizes fit Phillips Flat Screws sized #5. Drill a pilot hole with a 5/64" sized drill bit when using wood screws. Designed to reinforce corners on chests screens, windows, etc. Screw holes are countersunk. Visual-pack.
National Hardware 309BC Closet Rod RACK OVER DOOR 6 HOOK BRONZE  Knape & Vogt RP0021-48/72 Adjustable Closet Rod
CLOSET RODS 4FT WHT
Our Price: $12.44
National Hardware Closet Rod, Series: 309BC, 1-1/4 in Diameter x 4 ft Length, Steel, White, For used to hang clothes and other items InterDesign Over The Rod Hook, Series: Classico, 10-3/4 in Height, 5 in Width, 18-3/4 in Length, 6 Hooks, Door Mounting, Steel, Bronze, For Jackets, Towels, Robes, Scarves, Ties, Belts and Other Clothing Accessories 1-1/4" diameter. White finish.
Mintcraft FC-Z04-013L Flat Corner Brace National Hardware V24 In-Swinging Thumb Latch National Hardware N177-196 Cane Bolt
DOOR/GATE LATCHES BLK
Our Price: $12.71
CANE BOLT 1/2X18IN ZN PLT
Our Price: $12.71
Use on wood in both the indoors and outdoors. Reinforces flat, right angle corner joints. Rust resistant. National Hardware Thumb Latch, In-Swinging, Series: V24, 0.915 in Diameter, 1.37 in Overall Height, 4.02 in Overall Width, Suitable For Use With: Doors and Gates Upto 1-3/4 in Thickness and In-Swinging Doors, Hot Rolled Steel, Black, Includes: Hex Lags and Screws, BHMA A138.18 National Hardware Cane Bolt, Series: V835, 1/2 in Diameter, 18 in Overall Height, Wall Mounting, 0.94 in Mounting Hole, Suitable For Use With: Heavy Wood Gates And Doors, Hot Rolled Steel, Zinc Plated, BHMA A138.18, For Vertical or Horizontal Applications
National Hardware V1134 Sliding Bolt Door/Gate Latch BRACE CNR FLAT STL 6INX1IN GLV LATCH THUMB STEEL BLACK
DOOR/GATE LATCHES GALV
Our Price: $12.97
National Hardware Door/Gate Latch, Sliding Bolt, Series: V1134, 6.19 in Overall Height, Suitable For Use With: Left or Right Hand Swinging Doors, Sliding Doors and Gates, Steel, Galvanized, Includes: Carriage Bolts and Screws, BHMA A138.18 Use on wood in both the indoors and outdoors. Reinforces flat, right angle corner joints. Rust resistant. For inward and outward swinging doors and gates 5/8" - 1-3/4" thick. Use with padlock for added security. Screws included.
HINGE GATE ZINC PLATED 3-1/2IN Professional Choice 179192 Ornamental Strap Hinge National Hardware V13B All Purpose Door/Gate Latch
DOOR/GATE LATCHES ZN PLT
Our Price: $13.49
National Gate Hinge, Extra Heavy Duty, Surface Mounting, 48 lb Load Capacity, 3-1/2 in Overall Length, 12 ga Steel, Zinc-Plated, Standards: ANSI/BHMA A156.20-2989, For Home, Farm, Builder or Industrial Customers Manufactured from hot-rolled steel. Designed for full surface applications: Gates, garage doors, barns, sheds and rustic doors. Tight pin for left or right hand applications. Triple protected finish for extra corrosion protection. Reversible pin allows right or left hand applications. Safe working load (SWL) 40 lbs. National Hardware Door/Gate Latch, All Purpose, Series: V13B, 5.42 in Overall Height, Suitable For Use With: Left or Right Hand Swinging Doors, Sliding Doors and Gates, Steel, Zinc Plated, Includes: Screws, BHMA A138.18
National Hardware N151-951 Cane Bolt Knape & Vogt 0018-8WT3 1-Piece 3 Pole Closet Rod GATE SPRING ORNMT 13-3/4 BLK
CANE BOLT 5/8X18IN ZN PLT
Our Price: $13.51
National Hardware Cane Bolt, Series: V835, 5/8 in Diameter, 18 in Overall Height, Wall Mounting, 0.94 in Mounting Hole, Suitable For Use With: Heavy Wood Gates And Doors, Hot Rolled Steel, Zinc Plated, BHMA A138.18, For Vertical or Horizontal Applications 1-1/4" Diameter. Designed to close doors and gates automatically. Mounts on hinge side of door.
ROD CLOSET WHITE 48-72IN      LATCH ORN DOOR/GTE ZINC PLATED National Hardware BV835 Adjustable Throw Cane Bolt
ROD CLOSET WHITE 48-72IN
Our Price: $13.78
CANE BOLTS 1/2X18IN BLK
Our Price: $13.85
PermaSeam design consists of two structurally strong rolled shapes which telescope for easy adjustment. Closet rods exceed ANSI/BHMA A156.16 Deflection Standards when installed with center supports. Designed for right or left hand swinging gates. Rounded edges to protect livestock. Sturdy design gives years of trouble-free service. To lock, use National's #33S plate staple and a padlock. Lags and mounting screws included. Hot rolled steel guides; steel rod bar and strike. Boxed. National Hardware Cane Bolt, Adjustable Throw, Series: BV835, Suitable For Use With: Heavy Wood Gates and Doors, 1/2 in Diameter X 18 in Length, Hot Rolled Steel, Black, BHMA A138.18
Homebasix HK07-CH Garment Hook and Rack LATCH THUMB ORNMTL BLK STL    ROD CLOSET BRT 72-120IN
Ideal for hanging clothes or towels. Fits the top of most standard household doors. Chrome finish. Size: 14"W x 9-1/2"H x 3"D. Sleeved. Use on gates and doors. Can be used for right or left hand applications. Screws included. Used to hang clothes and other items. Tubes are made with lock seam construction for strength.  Ends align for easy installation. Visual-pack.
GATE ANTI-SAG KIT ZN PLTD STL ROD CLOSET ADJ 72-96IN SILVER National Hardware V850 Self-Closing Door and Gate Spring
Eliminates gate sag. Steel. Includes: (2) corner braces, (2) pairs of cable clamps, (1) hook and eye turnbuckle and (1) 90" stranded steel cable and fastener. Rods sized 48" to 72" and 72" to 120" includes 1-piece central support, and rods sized 96" to 150" include 2-piece central support. National Hardware Door and Gate Spring, Self-Closing, Series: V850, 11 in Nominal, Hot Rolled Steel, Black, Includes: Mounting Screws
BOLT CANE BLACK STEEL 18IN    National Hardware V1135 Sliding Bolt Door/Gate Latch Interdesign York Lyra 53470 Over-The-Door Rack
DOOR/GATE LATCHES ZN PLT
Our Price: $15.12
Can be used to lock gates or to keep gates open . Can be installed horizontally or vertically. Bolt can be kept in raised position when applied vertically. National Hardware Door/Gate Latch, Sliding Bolt, Series: V1135, Suitable For Use With: Right or Left Hand Swinging Gates, Steel, Zinc Plated, Includes: Lags and Mounting Screws, BHMA A138.18 Packed with pegable header, no hardware needed.
ROD CLOSET ADJ 48-72IN WHITE  National Hardware V28 Gate Latch HINGE GATE BLACK 7IN
DOOR/GATE LATCHES BLK
Our Price: $15.53
GATE HINGES 7IN BLK
Our Price: $15.59
Rods sized 48" to 72" and 72" to 120" includes 1-piece central support, and rods sized 96" to 150" include 2-piece central support. National Hardware Gate Latch, Heavy Duty, Series: V28, 6-3/4 in Overall Height, Post Mounting, 1-1/4 in Mounting Hole, Suitable For Use With: Fence Post Between Gate and Jamb, Hot Rolled Steel, Black, Includes: Hex Lags, BHMA A138.18 National T-Hinge, Contemporary, Surface Mounting, 55 lb Load Capacity, 7 in Overall Length, 12 ga Steel, Black, For Gates, Sheds and Barn Doors
BRACE CNR FLAT STL 8INX1IN GLV Knape & Vogt RP0022-72/120 Adjustable Closet Rod National Hardware V29A MaxLatch Self-Adjusting Gate Latch
AUTOMATIC GATE LATCHES SS
Our Price: $15.72
Use on wood in both the indoors and outdoors. Reinforces flat, right angle corner joints. Rust resistant. 1-1/4" diameter. National Hardware Gate Latch, Automatic, Self-Adjusting, Series: V29A, MaxLatch, Stainless Steel, Stainless Steel, BHMA A138.18
Stanley 399720 Padlock/Hasp Combination National Hardware V287 Extra Heavy Gate Hinge Homebasix C02Z6JF5000-3L 10-Layer Canvas Shoe Shelf
GATE HINGES 3-1/2IN BLK
Our Price: $15.87
Use to help secure cabinets, sheds and store rooms. Corrugated leaf offers greater strength than conventional flat-leaf hasps. Rotating post discourages forced entry. Hardened steel shackle resists cutting and sawing. Zinc plating resists rust. National Hardware Gate Hinge, Extra Heavy, Series: V287, 35 lb Load Capacity, 3-1/2 in Overall Length, 4-1/2 in Overall Width, Steel, Black, Zinc Plated, BHMA A138.18 Use to store up to 10 pairs of shoes. Hangs from a standard size closet rod.
National Hardware V27 Ornamental Gate Latch National Hardware V850 Self-Closing Door and Gate Spring Mintcraft FC-Z05-013L Flat Corner Brace
National Hardware Gate Latch, Ornamental, Series: V27, 10.4 in Overall Height, Suitable For Use With: Door and Gates from 1-1/2 - 3 in Thickness, Steel, Black, BHMA A138.18, 3 in Size National Hardware Door and Gate Spring, Self-Closing, Series: V850, 14 in Nominal, 61/64 in Outside Diameter, Hot Rolled Steel, Black, Includes: Mounting Screws Use on wood in both the indoors and outdoors. Reinforces flat, right angle corner joints. Rust resistant.
National Hardware 309BC Closet Rod Closetmaid 8995 Horizontal Closet Organizer HINGE GATE GALV 3-5/8IN
CLOSET RODS 6FT WHT
Our Price: $16.32
National Hardware Closet Rod, Series: 309BC, 1-1/4 in Diameter x 6 ft Length, Steel, White, For used to hang clothes and other items Convenient way to hold shoes, hobbies, media and office supplies. Designed to work perfectly with other Stackable Storage Organizers. 11.63"H x 24.13"W x 11.63"D. For gates, sheds and barn doors. WeatherGuard for maximum protection from the outdoor elements. Includes fasteners. Safe working load 48 lbs. Visual-pack.
ROD CLOSET ADJ 72X120IN SILVER National Hardware V849 Ornamental T Hinge National Hardware V841 Decorative Ornamental/Reversible T Hinge
GATE HINGES 7IN BLK
Our Price: $16.92
GATE HINGES 6IN BLK
Our Price: $17.33
Rods sized 48" to 72" and 72" to 120" includes 1-piece central support, and rods sized 96" to 150" include 2-piece central support. National Hardware T Hinge, Ornamental, Series: V849, 55 lb Load Capacity, 7 in Overall Length, Steel, Black, Zinc Plated, Includes: Screws, BHMA A138.18 National Hardware T Hinge, Decorative, Heavy Duty, Ornamental/Reversible, Series: V841, 6 in Overall Length, Steel, Black, Zinc Plated, BHMA A138.18, For Gates, Doors, Cabinets and Sheds
LATCH GATE THUMB BLK STL      ROD CLOSET ADJ 72-96IN WHITE  National Hardware V844 Ornamental Hook and Strap Hinge
GATE HINGES 7IN BLK
Our Price: $17.83
Use on gates and doors. Can be used for right or left hand applications. Screws included. Rods sized 48" to 72" and 72" to 120" includes 1-piece central support, and rods sized 96" to 150" include 2-piece central support. National Hardware Hook and Strap Hinge, Ornamental, Series: V844, 0.343 in Hole Diameter, 0.105 in Leaf Thickness, Fasteners: 5/16 X 1-1/2 in Screw, 50 lb Load Capacity, 11-1/4 in Overall Length, 7 in Overall Width, Steel, Black, Zinc Plated, Includes: Screws, BHMA A138.18
National Hardware V1131 Sliding Bolt Door/Gate Latch HINGE GATE BLACK 7-1/2IN      Knape & Vogt RP0021-72/120 Adjustable Closet Rod
DOOR/GATE LATCHES SS
Our Price: $17.96
National Hardware Door/Gate Latch, Sliding Bolt, Standard Duty, Series: V1131, 3 in Overall Height, 6-1/2 in Overall Width, 1-1/4 in Overall Depth, Suitable For Use With: Swinging or Sliding Doors and Gates, Stainless Steel, Stainless Steel, BHMA A138.18, For Premium Woods Like Cedar and Redwood For gates, sheds and barn doors. WeatherGuard for maximum protection from the outdoor elements. Fasteners included. Safe working load 55 lbs. Visual-pack. 1-1/4" diameter. White finish.
LATCH ORN DOOR/GTE ZINC PLATED T-HINGE ORNT BLK STL 7-11/16IN Mintcraft FC-Z025-01-3L Flat Corner Brace
Automatic retractable bolt. Designed for right or left hand swinging gates. Rounded edges to protect livestock. Sturdy design gives years of trouble-free service. Lags and mounting screws included. Hot rolled steel guides; steel rod bar and strike. Boxed. Adds ornamental design to any gate, door, storage bins and tool boxes. Screws included. Use on wood in both the indoors and outdoors. Reinforces flat, right angle corner joints. Rust resistant.
National Hardware V23A Adjust-O-Matic Gate Latch LATCH ORN DOOR/GTE ZINC PLATED HOOK SCREW/HINGE STRAP 8IN BLK
National Hardware Gate Latch, Heavy Duty, Series: V23A, Adjust-O-Matic, 2-1/2 in Overall Height, 3-1/4 in Overall Width, Steel, Zinc Plated, BHMA A138.18, 8 in Size Automatic retractable bolt clears entry for livestock protection. Designed for right or left hand swinging gates. Rounded edges to protect livestock. Sturdy design gives years of trouble-free service. Lags and mounting screws included. Hot rolled steel guides; steel rod bar and strike. Visual-pack. Use on gates and square or round fence posts. Durable. Screws included.
National Hardware V810 Cane Bolt Mintcraft FC-Z03-01 Flat Corner Brace ROD CLOSET ADJ 72X120IN WHITE
CANE BOLTS 1/2X12IN SS
Our Price: $19.70
National Hardware Cane Bolt, Series: V810, 1/2 in Diameter, 12 in Overall Height, Stainless Steel, Stainless Steel, BHMA A138.18 Use on wood in both the indoors and outdoors. Reinforces flat, right angle corner joints. Rust resistant. Rods sized 48" to 72" and 72" to 120" includes 1-piece central support, and rods sized 96" to 150" include 2-piece central support.
HINGE STRAP ORNMTL 7-11/16 BLK Stanley 1177BC Flat Corner Plate LATCH ORN DOOR/GATE BLACK
DOOR/GATE LATCHES BLK
Our Price: $20.99
Adds ornamental design to any gate, door, storage bins and tool boxes. With loose steel pin. Screws included. Used to support a 90 degree angle by application to the side. For superior strength plates should be used on both sides of the joint with through bolts. National Hardware Stall/Gate Latch, Series: N236, 5.57 in Overall Height, 0.34 in Bolt Diameter, 10.29 in Bolt Length, 0.26 in Dia Mounting Hole, Suitable For Use With: Right or Left Hand Swinging Gates, Steel, Black, Includes: Lags and Mounting Screws, Standards: BHMA A138.18
HINGE GATE BLACK 13IN         Closetmaid 8953-00 Stackable Vertical Closet Organizer Closetmaid 8923 Stackable Horizontal Closet Organizer
Bearing design eliminates metal to metal contact for smooth, quiet operation. 100 lbs. Safe Working Load. Visual-pack. Provides storage space in closet. Size: 31-1/2" x 12.13" x 11.63". Convenient way to hold shoes, hobbies, media and office supplies. Designed to work perfectly with other Stackable Storage Organizers. 11.63"H x 24.13"W x 11.63"D.
Closetmaid 8963-00 Stackable Horizontal Closet Organizer Closetmaid 8956 Vertical Closet Organizer Stanley BB8603 Closet Rod
CLOSET RODS 6FT WHT
Our Price: $21.60
Convenient way to hold shoes, hobbies, media and office supplies. Designed to work perfectly with other Stackable Storage Organizers. 11.63"H x 24.13"W x 11.63"D. Provides storage space in closet. Size: 31-1/2" x 12.13" x 11.63". Used for basic closet storage while adding a decorative touch. Large diameter offer superior strength and durability. Can be cut to any size using a hacksaw. 2mm thickness; heavy duty. Meets ANSI/BHMA Grade 1