Home > HARDWARE > BUILDERS HARDWARE > HINGES > HOOK/STRAP HINGES
Sort By:
1
National Hardware 2191BC Flat U-Bolt Plate National Hardware 2191BC Flat U-Bolt Plate Closetmaid 01016 End Cap
National Hardware U-Bolt Plate, Flat, Series: 2191BC, 3.19 in Length, 3/4 in Width, 0.08 in Thickness, 0.33 in Mounting Hole, 2-1/4 in Mounting Hole, Hot Rolled Steel, Zinc Plated, BHMA A138.18 National Hardware U-Bolt Plate, Flat, Series: 2191BC, 5.38 in Length, 1.02 in Width, 0.11 in Thickness, 0.44 in Mounting Hole, 4 in Mounting Hole, Hot Rolled Steel, Zinc Plated, BHMA A138.18 Vinyl end cap provides protection from cut end of wire shelving that exposes possible rough edges. Large end caps cover the large rod, 0 gauge, .25"H x .4"W x .4"D. Small end caps are for the 4 gauge wire, .2"H x .2"W x .2"D. Designed to be used with ClosetMaid - Shelf & Rod shelving.
SuperSlide 5629 Closet Rod Support HINGE STRAP ZINC PLATED 3IN   HINGE STRAP STEEL LD 2IN ZINC
STRAP HINGES 3IN ZN PLT
Our Price: $2.03
SuperSlide shelving and hardware allows hangers to slide freely on both Fixed Mount and ShelfTrack mounting systems. Hangers slide without interruption. Snaps onto SuperSlide shelf to support hang rod. Use one every 36 in. of hang rod and at each end of shelf and hang rod. 5.75"H x 0.87"W x 3.87"D. Material: Resin Offset screw holes for extra strength and to prevent wood from splitting. Tight pin for left or right hand applications. Steel with aluminum pin. Safe working load: 18 lbs. Boxed loose. Use in both the interior and exterior. Screws included.
BRACKET SUPPORT SHOE SHELF WHT HINGE STRAP ZINC PLATED 5IN   National Hardware 2190BC Round Bend U-Bolt
STRAP HINGES 5IN ZN PLT
Our Price: $3.20
For wire shelving, converts almost any wire shelf to a shoe shelf. Make a shoe shelf by inverting shelf, lip facing up. Holds shoes away from wall at an angle. Use 1 shoe support bracket every 24 in. Does not work with Close Mesh shelving. 6.125"H x 1.25"W x 4.75"D. Offset screw holes for extra strength and to prevent wood from splitting. Tight pin for left or right hand applications. Steel with aluminum pin. Safe working load: 18 lbs. Boxed loose. National Hardware U-Bolt, Round Bend, Series: 2190BC, 3/8 in Thread, 2 in Inside Length, 3-1/2 in Inside Width, Steel, Zinc Plated, Includes: Plate and Nuts, BHMA A138.18, NO 632, For Automotive, Plumbing and Other Home and Industrial Applications
HASP SAFETY 3IN ZN PLT STEEL  HINGE STRAP ZINC PLATED 6IN   National Hardware 2190BC Round Bend U-Bolt
STRAP HINGES 6IN ZN PLT
Our Price: $3.71
Use on doors, cabinets and gates with a 90 degree corner. Rust resistant. Offset screw holes for extra strength and to prevent wood from splitting. Tight pin for left or right hand applications. Steel with aluminum pin. Safe working load: 18 lbs. Boxed loose. National Hardware U-Bolt, Round Bend, Series: 2190BC, 3/8 in Thread, 3 in Inside Length, 4-1/2 in Inside Width, Steel, Zinc Plated, Includes: Plate and Nuts, BHMA A138.18, NO 652, For Automotive, Plumbing and Other Home and Industrial Applications
Stanley 131193 Hinge Screw Eye Stanley 130112 Screw Hook Stanley 222224 U-Bolt
To be used in wood gate applications in conjunction with screw hooks, bolt hooks and pintles. For use with new installations with Stanley's 130732, 131102, 248047, 131060, 130765, and 130799 hinge straps. Adjusts to correct gate sag. For use in exterior and interior applications. Steel resists rust. Plate and nut included.
HINGE STRAP STEEL LD 3IN ZINC National Hardware 282BC Flush/Full Inset Strap Hinge National Hardware V288 Hinge Hasp
STRAP HINGES 4IN ZN PLT
Our Price: $4.15
HINGE HASPS 3IN ZN PLT
Our Price: $4.24
Use in both the interior and exterior. Screws included. National Hardware Strap Hinge, Flush/Full Inset, Heavy Duty, Series: 282BC, 0.28 in Hole Diameter, 0.08 in Leaf Thickness, 4 in Door Leaf Length, 1.61 in Door Leaf Width, 4 in Frame Leaf Length, 1.61 in Frame Leaf Width, 0.22 in Diameter Pin, Wall Mounting, 60 lb Load Capacity, 8 in Overall Width, Hot Rolled Steel, Zinc Plated, BHMA A138.18 National Hardware Hinge Hasp, Series: V288, 3/4 in Height Shackle, 5-1/4 in Length, 1-5/32 in Height, Hot Rolled Steel, Aluminum Pin, Zinc Plated, BHMA A138.18 Certified, 3 in, For Regular or Around the Corner Applications
National Hardware V280 Flush/Full Inset Light Strap Hinge National Hardware 282BC Flush/Full Inset Strap Hinge Mintcraft LR083 Bolt Hook
STRAP HINGES 2IN ZN PLT
Our Price: $4.41
STRAP HINGES 5IN ZN PLT
Our Price: $4.41
National Hardware Light Strap Hinge, Flush/Full Inset, Series: V280, 6 Holes, 0.05 in Leaf Thickness, 1-1/16 in Door Leaf Length, 2 in Door Leaf Width, 1-1/16 in Frame Leaf Length, 2 in Frame Leaf Width, Fixed Pin, 0.119 in Diameter Pin, Aluminum Pin, Wall Mounting, 18 lb Load Capacity, 3-3/4 in Overall Length, 1-1/16 in Overall Width, Zinc Plated National Hardware Strap Hinge, Flush/Full Inset, Heavy Duty, Series: 282BC, 0.09 in Leaf Thickness, 5 in Door Leaf Length, 1.85 in Door Leaf Width, 5 in Frame Leaf Length, 1.85 in Frame Leaf Width, 0.27 in Diameter Pin, Wall Mounting, 70 lb Load Capacity, 9.54 in Overall Width, Hot Rolled Steel, Zinc Plated, BHMA A138.18 Can be used with gate strap hinges to support wooden gates and fences. Can be easily adjusted.
HINGE STRAP STEEL LD 2IN GALV HASP SAFETY 4-1/2IN ZINC STL  Mintcraft LR094 Screw Hook
Use in both the interior and exterior. Screws included. Use on doors, cabinets and gates with a 90 degree corner. Rust resistant. Easily installs into wood surfaces. Replaces worn or broken bolt hooks. Can be used with strap hinges.
National Hardware V280 Flush/Full Inset Light Strap Hinge SuperSlide 75638 Closet Rod End Cap Stanley 130146 Screw Hook
STRAP HINGES 3IN ZN PLT
Our Price: $4.77
National Hardware Light Strap Hinge, Flush/Full Inset, Series: V280, 6 Holes, 0.056 in Leaf Thickness, 1-3/16 in Door Leaf Length, 3 in Door Leaf Width, 1-3/16 in Frame Leaf Length, 3 in Frame Leaf Width, Fixed Pin, 0.17 in Diameter Pin, Aluminum Pin, Wall Mounting, 5-11/16 in Overall Length, 1-3/16 in Overall Width, Hot Rolled Steel, Zinc Plated For use with ClosetMaid, SuperSlide wire shelving. Prevents hangers from sliding off end of closet hang rod. Insert into end of the hang rod.Two end caps per package. 0.5"H x 0.5"W x 0.5"D. Material: Resin. For use with new installations with Stanley's 130732, 131102, 248047, 131060, 130765, and 130799 hinge straps. Adjusts to correct gate sag.
HINGE STRAP STEEL LD 3IN GALV National Hardware 282BC Flush/Full Inset Strap Hinge U-BLT SQ ZN PLT 3/8X3-5/8X4IN
STRAP HINGES 6IN ZN PLT
Our Price: $5.08
Use in both the interior and exterior. Screws included. National Hardware Strap Hinge, Flush/Full Inset, Heavy Duty, Series: 282BC, 0.1 in Leaf Thickness, 6 in Door Leaf Length, 2.43 in Door Leaf Width, 6 in Frame Leaf Length, 2.43 in Frame Leaf Width, 0.32 in Diameter Pin, Wall Mounting, 85 lb Load Capacity, 11.47 in Overall Width, Hot Rolled Steel, Zinc Plated, BHMA A138.18 National Hardware U-Bolt, Series: 2192BC, Lumber Square, Square Thread, 4 in Inside Length, 3-5/8 in Inside Width, 3/8 in Dia Shank, Steel, Zinc-Plated, Includes: Plate and Hex Nuts Attached, Standards: BHMA A138.18 Specified, For Securing Various Products To Rectangular Wood and Metal Objects
HINGE STRAP STEEL LD 4IN ZINC Stanley 131060 Hinge Strap Stanley 131227 Hinge Screw Eye
Use in both the interior and exterior. Screws included. Designed for new installations with Stanley's 130708, 130559, 130583, and 130617 hooks. Strap punched for 5/16" (6" and 8" sizes) or 3/8" (10", 12", 14", 16" 18", 20" and 24" sizes) bolts. To be used in wood gate applications in conjunction with screw hooks, bolt hooks and pintles.
National Hardware V288 Hinge Hasp National Hardware 2192BC Lumber Size Square U-Bolt National Hardware 2192BC Lumber Size Square U-Bolt
HINGE HASPS 4IN ZN PLT
Our Price: $5.32
National Hardware Hinge Hasp, Series: V288, 3/4 in Height Shackle, 6-1/4 in Length, 1-1/4 in Height, Hot Rolled Steel, Aluminum Pin, Zinc Plated, BHMA A138.18 Certified, 4 in, For Regular or Around the Corner Applications National Hardware U-Bolt, Lumber Size, Square, Series: 2192BC, 3/8-16 in Thread, 3-3/4 in Thread Length, 3.67 in Inside Length, 5 in Inside Width, 0.33 in Shank, Steel, Zinc Plated, Includes: Nuts, BHMA A138.18 National Hardware U-Bolt, Lumber Size, Square, Series: 2192BC, 3/8-16 in Thread, 2-3/4 in Thread Length, 3.67 in Inside Length, 6 in Inside Width, 0.33 in Shank, Steel, Zinc Plated, Includes: Nuts, BHMA A138.18
Stanley 131102 Hinge Strap Mintcraft LR095 Screw Hook HASP SAFETY HINGE DBL 3-1/2 IN
Designed for new installations with Stanley's 130708, 130559, 130583, and 130617 hooks. Strap punched for 5/16" (6" and 8" sizes) or 3/8" (10", 12", 14", 16" 18", 20" and 24" sizes) bolts. Easily installs into wood surfaces. Replaces worn or broken bolt hooks. Can be used with strap hinges. Use to secure chests, cabinets, lockers and door corners. Rust resistant.
Stanley 130559 Full Threaded Bolt Hook National Hardware 2192BC Lumber Size Square U-Bolt HINGE STRAP STEEL LD 6IN ZINC
Adjust to correct gate sag. Includes 2 washers and 2 nuts per hook. Full threaded hook is bolted through the post and firmly secured with standard size nuts and washers on each side. As a replacement part: use with National's 292 Bold Hook. For new installations: use with National's #294 Hinge Straps. Use with the Stanley/National Strap size 14"(N130-799), 16"(N168-336), and the 18"(N248-039). National Hardware U-Bolt, Lumber Size, Square, Series: 2192BC, 3/8-16 in Thread, 3-3/4 in Thread Length, 3.67 in Inside Length, 7 in Inside Width, 0.33 in Shank, Steel, Zinc Plated, Includes: Nuts, BHMA A138.18 Use in both the interior and exterior. Screws included.
Stanley N128-249 Strap Hinge National Hardware V280 Flush/Full Inset Light Strap Hinge National Hardware N265-355 Flush/Full Inset Continuous Hinge
STRAP HINGES 4IN GALV
Our Price: $6.70
STRAP HINGES 4IN ZN PLT
Our Price: $6.70
National Strap Hinge, Heavy Duty, Series: N128-249, Suitable For Use With: Barn, Shed Doors, Storage Bins, Tool Boxes and Gates, 3 Holes, 4 in Door Leaf, 1.61 in Door Leaf, Tight Pin, Brass Pin, Screw Mounting, Fasteners: NO 7 Screw, Steel, Galvanized National Hardware Light Strap Hinge, Flush/Full Inset, Series: V280, 6 Holes, 0.056 in Leaf Thickness, 1-1/4 in Door Leaf Length, 4 in Door Leaf Width, 1-1/4 in Frame Leaf Length, 4 in Frame Leaf Width, Fixed Pin, 0.195 in Diameter Pin, Aluminum Pin, Wall Mounting, 8 lb Load Capacity, 7-11/16 in Overall Length, 1-1/4 in Overall Width, Zinc Plated National Hardware Continuous Hinge, Flush/Full Inset, Series: V570, 12 in Door Leaf Length, 12 in Frame Leaf Length, Friction, Removable Pin, 0.9 in Diameter Pin, Steel Pin, Surface Mounting, Fasteners: NO 4 X 1/2 in Screw, 1-1/16 in Overall Width, Cold Rolled Steel, Brass, For Residential Applications
National Hardware N265-371 Flush/Full Inset Continuous Hinge Mintcraft LR085 Bolt Hook Closetmaid 7540 Small End Cap
National Hardware Continuous Hinge, Flush/Full Inset, Series: V570, 12 in Door Leaf Length, 12 in Frame Leaf Length, Friction, Removable Pin, 0.9 in Diameter Pin, Steel Pin, Surface Mounting, Fasteners: NO 4 X 1/2 in Screw, 1-1/16 in Overall Width, Cold Rolled Steel, Nickel Plated, For Residential Applications Can be used with gate strap hinges to support wooden gates and fences. Can be easily adjusted. Vinyl end cap provides protection from cut end of wire shelving that exposes possible rough edges. Large end caps cover the large rod, 0 gauge, .25"H x .4"W x .4"D. Small end caps are for the 4 gauge wire, .2"H x .2"W x .2"D. Designed to be used with ClosetMaid - Shelf & Rod shelving.
HINGE HASP ZINC PLATED 6IN    National Hardware 282BC Flush/Full Inset Strap Hinge Stanley 347807 U-Bolt
HINGE HASPS 6IN ZN PLT
Our Price: $7.01
STRAP HINGES 8IN ZN PLT
Our Price: $7.18
Stanley Hinge Hasp, Series: V288, 1 Locking Holes, 6 in Length, Hot Rolled Steel, Zinc-Plated, For Regular or Around The Corner Applications National Hardware Strap Hinge, Flush/Full Inset, Heavy Duty, Series: 282BC, 0.11 in Leaf Thickness, 8 in Door Leaf Length, 3.08 in Door Leaf Width, 8 in Frame Leaf Length, 3.08 in Frame Leaf Width, 0.39 in Diameter Pin, Wall Mounting, 15.39 in Overall Width, Hot Rolled Steel, Zinc Plated, BHMA A138.18, For Residential Applications With plate and hex nuts. 2190bc Ea Bulk
HINGE STRAP STEEL LD 4IN GALV National Hardware N265-363 Flush/Full Inset Continuous Hinge National Hardware N265-389 Flush/Full Inset Continuous Hinge
Use in both the interior and exterior. Screws included. National Hardware Continuous Hinge, Flush/Full Inset, Series: V570, 12 in Door Leaf Length, 12 in Frame Leaf Length, Friction, Removable Pin, 0.9 in Diameter Pin, Steel Pin, Surface Mounting, Fasteners: NO 4 X 1/2 in Screw, 1-1/2 in Overall Width, Cold Rolled Steel, Brass, For Residential Applications National Hardware Continuous Hinge, Flush/Full Inset, Series: V570, 12 in Door Leaf Length, 12 in Frame Leaf Length, Friction, Removable Pin, 0.9 in Diameter Pin, Steel Pin, Surface Mounting, Fasteners: NO 4 X 1/2 in Screw, 1-1/2 in Overall Width, Cold Rolled Steel, Nickel Plated, For Residential Applications
HOOK SCREW/HINGE STRAP 6IN    National Hardware V34 Double Hinge Safety Hasp Stanley 130179 Screw Hook
Replaces worn or broken bolt hooks.  Can be used with strap hinges National Hardware Safety Hasp, Double Hinge, Series: V34, 6-1/4 in Length, 1-1/2 in Height, Cold Rolled Steel, Aluminum Pin, Zinc Plated, Includes: Rigid Non-Swivel Staple, BHMA A138.18 Certified, 3-1/4 in, For Around the Corner Applications on Lockers, Chests, Tool Boxes and Doors For use with new installations with Stanley's 130732, 131102, 248047, 131060, 130765, and 130799 hinge straps. Adjusts to correct gate sag.
Stanley 222075 U-Bolt Stanley 347815 U-Bolt HOOK SCREW/HINGE STRAP 8IN
For use in exterior and interior applications. Steel resists rust. Plate and nut included. With plate and hex nuts. 2190bc Ea Bulk Replaces worn or broken bolt hooks.  Can be used with strap hinges
HASP SAFETY HINGE DBL 4-1/2IN Stanley 131375 Pintle Stanley 222083 Round Bend U-Bolt
Use to secure chests, cabinets, lockers and door corners. Rust resistant. Designed for use with Stanley's 130732, 131102, 248047, 131060, 248039, 130765, 168336, and 130799 hinge straps. Gate can be easily lifted off of pintle. Designed for heavy-duty gates and doors. Pintle punched for 5/16" (1/2" size) or 3/8" (5/8" size) bolts. For use in exterior and interior applications. Steel resists rust. Plate and nut included.
Stanley 347823 U-Bolt Stanley 130732 Hinge Strap National Hardware V280 Flush/Full Inset Light Strap Hinge
STRAP HINGES 5IN ZN PLT
Our Price: $8.53
With plate and hex nuts. 2190bc Ea Bulk Designed for new installations with Stanley's 130708, 130559, 130583, and 130617 hooks. Strap punched for 5/16" (6" and 8" sizes) or 3/8" (10", 12", 14", 16" 18", 20" and 24" sizes) bolts. National Hardware Light Strap Hinge, Flush/Full Inset, Series: V280, 6 Holes, 0.072 in Leaf Thickness, 1-1/2 in Door Leaf Length, 5 in Door Leaf Width, 1-1/2 in Frame Leaf Length, 5 in Frame Leaf Width, Fixed Pin, 0.195 in Diameter Pin, Aluminum Pin, Wall Mounting, 9-5/8 in Overall Length, 1-1/2 in Overall Width, Hot Rolled Steel, Zinc Plated
Stanley 130617 Full Threaded Bolt Hook HASP SAFETY KYD 3-1/2 CHROME  HINGE STRAP STEEL LD 6IN GALV
Adjust to correct gate sag. Includes 2 washers and 2 nuts per hook. Full threaded hook is bolted through the post and firmly secured with standard size nuts and washers on each side. As a replacement part: use with National's 292 Bold Hook. For new installations: use with National's #294 Hinge Straps. Use with the Stanley/National Strap size 14"(N130-799), 16"(N168-336), and the 18"(N248-039). Locks with a key for added security. Includes 2 keys. No padlock required. Use in both the interior and exterior. Riveted brass pin. 1.8mm thickness.
SuperSlide 25633 Corner Corner Round Bar Stanley 347831 U-Bolt National Hardware V34 Double Hinge Safety Hasp
Use with SuperSlide shelving to create uninterrupted sliding action around corners for walk-in closets. Tapered ends slide easily into ClosetMaid, SuperSlide hang rods. Support connection of hang rod with a Hang Bar Support. 0.75?H x 10.25?W x 10.25?DMaterial: Epoxy coated steel. With plate and hex nuts. 2190bc Ea Bulk National Hardware Safety Hasp, Double Hinge, Series: V34, 8.19 in Length, 1-1/2 in Height, Cold Rolled Steel, Aluminum Pin, Zinc Plated, Includes: Rigid Non-Swivel Staple, BHMA A138.18 Certified, 4-1/2 in, For Around the Corner Applications on Lockers, Chests, Tool Boxes and Doors
National Hardware V827 Keyed Hasp Lock Mintcraft LR096 Screw Hook National Hardware VKA827 Keyed Hasp Lock
National Hardware Hasp Lock, Keyed, Series: V827, 1.61 in Length X 1.61 in Width X 1.16 in Height Shackle, 6 in Length, 1.6 in Height, Die Cast Zinc, Chrome Plated, 4-1/2 in, For Securing a Wide Variety of Doors, Cabinets, Boxes and Trunks Easily installs into wood surfaces. Replaces worn or broken bolt hooks. Can be used with strap hinges. National Hardware Hasp Lock, Keyed, Series: VKA827, 4-1/2 in Length, Steel, Chrome Plated, 4-1/2 in, For Securing a Wide Variety of Doors, Cabinets, Boxes and Trunks
Mintcraft LR084 Bolt Hook Stanley 131409 Pintle Stanley 130765 Hinge Strap
Can be used with gate strap hinges to support wooden gates and fences. Can be easily adjusted. Designed for use with Stanley's 130732, 131102, 248047, 131060, 248039, 130765, 168336, and 130799 hinge straps. Gate can be easily lifted off of pintle. Designed for heavy-duty gates and doors. Pintle punched for 5/16" (1/2" size) or 3/8" (5/8" size) bolts. Designed for new installations with Stanley's 130708, 130559, 130583, and 130617 hooks. Strap punched for 5/16" (6" and 8" sizes) or 3/8" (10", 12", 14", 16" 18", 20" and 24" sizes) bolts.
HINGE STRAP GALV 5IN          Master Lock 720DPF Single Hinge Latching Hasp Stanley 222109 Round Bend U-Bolt
STRAP HINGES 5IN GALV
Our Price: $9.36
Offset screw holes for extra strength and to prevent wood from splitting. Tight pin for left or right hand applications. Manufactured with hot-rolled steel. Designed to fit most corners and angles to secure hard-to-lock properly. Recommended for use with Master Lock medium and high security padlocks. Heavy gauge hardened steel protects against cutting and sawing. Hardened Boron alloy staple withstands up to 8 tons of cutting force. Rolled edges protect against prying and conceal mounting screws. Hinge pins are hidden and are virtually impossible to remove. Accepts shackle diameters up to 7/16". For use in exterior and interior applications. Steel resists rust. Plate and nut included.
HASP SAFETY KYD 4-1/2 CHROME  National Hardware N148-205 Flush/Full Inset Continuous Hinge National Hardware N148-221 Flush/Full Inset Continuous Hinge
Locks with a key for added security. Includes 2 keys. No padlock required. National Hardware Continuous Hinge, Flush/Full Inset, Series: V570, 30 in Door Leaf Length, 30 in Frame Leaf Length, Friction, Removable Pin, 0.9 in Diameter Pin, Steel Pin, Surface Mounting, Fasteners: NO 4 X 1/2 in Screw, 1-1/16 in Overall Width, Cold Rolled Steel, Brass, For Residential Applications National Hardware Continuous Hinge, Flush/Full Inset, Series: V570, 30 in Door Leaf Length, 30 in Frame Leaf Length, Friction, Removable Pin, 0.9 in Diameter Pin, Steel Pin, Surface Mounting, Fasteners: NO 4 X 1/2 in Screw, 1-1/16 in Overall Width, Cold Rolled Steel, Nickel Plated, For Residential Applications
Mintcraft LSH-Z02-013L Light Duty Strap Hinge Mintcraft LR086 Bolt Hook National Hardware V130 Flush/Full Inset Cafe Door Hinge
CAFE DOOR HINGES BRS
Our Price: $10.27
Use in both the interior and exterior. Rust resistant. Can be used with gate strap hinges to support wooden gates and fences. Can be easily adjusted. National Hardware Cafe Door Hinge, Flush/Full Inset, Series: V130, Removable Pin, Wall Mounting, 50 lb Load Capacity, Steel/Die Cast/Delrin, Brass, Includes: Removable ramps, 180 deg Opening, For Commercial/Industrial and Residential Applications
Stanley 130799 Hinge Strap HOOK SCREW/HINGE STRAP 10IN   Stanley 130203 Screw Hook
Designed for new installations with Stanley's 130708, 130559, 130583, and 130617 hooks. Strap punched for 5/16" (6" and 8" sizes) or 3/8" (10", 12", 14", 16" 18", 20" and 24" sizes) bolts. Replaces worn or broken bolt hooks.  Can be used with strap hinges For use with new installations with Stanley's 130732, 131102, 248047, 131060, 130765, and 130799 hinge straps. Adjusts to correct gate sag.
Stanley 130583 Full Threaded Bolt Hook Stanley 222117 Round Bend U-Bolt Stanley 222125 U-Bolt
Adjust to correct gate sag. Includes 2 washers and 2 nuts per hook. Full threaded hook is bolted through the post and firmly secured with standard size nuts and washers on each side. As a replacement part: use with National's 292 Bold Hook. For new installations: use with National's #294 Hinge Straps. Use with the Stanley/National Strap size 14"(N130-799), 16"(N168-336), and the 18"(N248-039). For use in exterior and interior applications. Steel resists rust. Plate and nut included. For use in exterior and interior applications. Steel resists rust. Plate and nut included.
Stanley 222141 U-Bolt Stanley 222166 U-Bolt Prime Line U 9951 Keyed Hasp
For use in exterior and interior applications. Steel resists rust. Plate and nut included. For use in exterior and interior applications. Steel resists rust. Plate and nut included. Steel hasp hinges over die-cast locking mechanism. Twist keyed knob to lock and use key to unlock. Hasp cover screws when in locked position. Includes 1 hasp, 1 locking mechanism, 2 keys and 1 set of installation screws. Prefix U on factory number denotes new Defender Security packaging.
Stanley N128-322 Strap Hinge National Hardware N148-171 Flush/Full Inset Continuous Hinge National Hardware N148-155 Flush/Full Inset Continuous Hinge
STRAP HINGES 6IN GALV
Our Price: $10.61
CONT HINGE 1-1/2X30IN BRS
Our Price: $10.98
National Strap Hinge, Heavy Duty, Series: N128-322, Suitable For Use With: Barn, Shed Doors, Storage Bins, Tool Boxes and Gates, 4 Holes, 6 in Door Leaf, 2.43 in Door Leaf, Tight Pin, Brass Pin, Screw Mounting, Fasteners: NO 9 Screw, Steel, Galvanized National Hardware Continuous Hinge, Flush/Full Inset, Series: V570, 30 in Door Leaf Length, 30 in Frame Leaf Length, Friction, Removable Pin, 0.9 in Diameter Pin, Steel Pin, Surface Mounting, Fasteners: NO 4 X 1/2 in Screw, 1-1/2 in Overall Width, Cold Rolled Steel, Nickel Plated, For Residential Applications National Hardware Continuous Hinge, Flush/Full Inset, Series: V570, 30 in Door Leaf Length, 30 in Frame Leaf Length, Friction, Removable Pin, 0.9 in Diameter Pin, Steel Pin, Surface Mounting, Fasteners: NO 4 X 1/2 in Screw, 1-1/2 in Overall Width, Cold Rolled Steel, Brass, For Residential Applications
HINGE STRAP STEEL HD 4IN ZINC SuperSlide 2058 Closet Rod HINGE GRAVITY PIVOT SAT BRS
Ideal for doors, gates, sheds and toolboxes. Screws included. Snaps into the Closet Rod Support to allow hangers to slide without interruption. Can be cut to customize length . Holds up to 30lbs per foot. Material: Epoxy coated steel. Designed for lightweight louvered and cafe doors that are 3/4" to 1-3/8" thick.  Automatically returns the door to the center opening. Holds door open at 90 degrees on either side of opening.
HINGE STRAP STL HD 4IN BLACK  Stanley 222133 U-Bolt American Lock A885D Double Hinge Locking Hasp
Ideal for doors, gates, sheds and toolboxes. Screws included. For use in exterior and interior applications. Steel resists rust. Plate and nut included. Zinc plated. Resists cutting, sawing, and hammering. Ideal for corners and angles. Mounting hardware included. Accepts shackle diameter up to 7/16".
HOOK SCREW/HINGE STRAP 12IN   Stanley 222158 U-Bolt Stanley 222182 U-Bolt
Replaces worn or broken bolt hooks.  Can be used with strap hinges For use in exterior and interior applications. Steel resists rust. Plate and nut included. For use in exterior and interior applications. Steel resists rust. Plate and nut included.
Stanley 130641 Full Threaded Bolt Hook American Lock A850D Locking Hasp Stanley 222174 U-Bolt
Adjust to correct gate sag. Includes 2 washers and 2 nuts per hook. Full threaded hook is bolted through the post and firmly secured with standard size nuts and washers on each side. As a replacement part: use with National's 292 Bold Hook. For new installations: use with National's #294 Hinge Straps. Use with the Stanley/National Strap size 14"(N130-799), 16"(N168-336), and the 18"(N248-039). Hardened steel staple resists cutting, sawing, and hammering. Zinc plated hardened steel for added strength and weatherability. Mounting hardware included for installation. Applications: trailers, van doors, garages, sheds, barns, storage buildings, vending machines, utility rooms, and warehouse doors. Accepts shackle diameter up to 7/16". For use in exterior and interior applications. Steel resists rust. Plate and nut included.
HINGE STRAP STL HD 6IN BLACK  National Hardware 282BC Flush/Full Inset Strap Hinge HINGE CONT BRT BRASS 1-1/2X30
STRAP HINGES 10IN ZN PLT
Our Price: $12.63
Ideal for doors, gates, sheds and toolboxes. Screws included. National Hardware Strap Hinge, Flush/Full Inset, Heavy Duty, Series: 282BC, 0.36 in Hole Diameter, 0.14 in Leaf Thickness, 10 in Door Leaf Length, 3.68 in Door Leaf Width, 10 in Frame Leaf Length, 3.68 in Frame Leaf Width, 0.44 in Diameter Pin, Wall Mounting, 20 in Overall Width, Hot Rolled Steel, Zinc Plated, BHMA A138.18 Medium gauge construction for use on lids, table leaves and cabinet doors.
Master Lock 722D Double Hinge High Security Hasp Stanley 168336 Hinge Strap Mintcraft LSH-Z03-013L Light Duty Strap Hinge
Designed to fit most corners and angles to secure hard-to-lock property. Recommended for use with Master Lock medium and high security padlocks. Heavy gauge hardened steel protects against cutting and sawing. Hardened Boron alloy staple withstands up to 8 tons of cutting force. Rolled edges protect against prying and conceal mounting screws. Hinge pins are hidden and are virtually impossible to remove. Accepts shackle diameters up to 7/16". Designed for new installations with Stanley's 130708, 130559, 130583, and 130617 hooks. Strap punched for 5/16" (6" and 8" sizes) or 3/8" (10", 12", 14", 16" 18", 20" and 24" sizes) bolts. Use in both the interior and exterior. Rust resistant.
HINGE CONT BRT NICKEL 1-1/2X30 Stanley 222562 U-Bolt HINGE S-H/STRP ZINC PLTD 6IN
Medium gauge construction for use on lids, table leaves and cabinet doors. For use in exterior and interior applications. Steel resists rust. Plate and nut included. Designed for use on gates, utility sheds, barn doors, etc. Adjusts to correct gate sag. Gate can be lifted off the screw hooks. Strap punched for 5/16 In. or 3/8 In. bolts. Mounting bolts are NOT included. Manufactured from hot-rolled steel. Boxed loose barcoded.
National Hardware N148-353 Flush/Full Inset Continuous Hinge National Hardware N148-379 Flush/Full Inset Continuous Hinge Stanley 130674 Full Threaded Bolt Hook
National Hardware Continuous Hinge, Flush/Full Inset, Series: V570, 48 in Door Leaf Length, 48 in Frame Leaf Length, Friction, Removable Pin, 0.9 in Diameter Pin, Steel Pin, Surface Mounting, Fasteners: NO 4 X 1/2 in Screw, 1-1/16 in Overall Width, Cold Rolled Steel, Brass, For Residential Applications National Hardware Continuous Hinge, Flush/Full Inset, Series: V570, 48 in Door Leaf Length, 48 in Frame Leaf Length, Friction, Removable Pin, 0.9 in Diameter Pin, Steel Pin, Surface Mounting, Fasteners: NO 4 X 1/2 in Screw, 1-1/16 in Overall Width, Cold Rolled Steel, Nickel Plated, For Residential Applications Adjust to correct gate sag. Includes 2 washers and 2 nuts per hook. Full threaded hook is bolted through the post and firmly secured with standard size nuts and washers on each side. As a replacement part: use with National's 292 Bold Hook. For new installations: use with National's #294 Hinge Straps. Use with the Stanley/National Strap size 14"(N130-799), 16"(N168-336), and the 18"(N248-039).
Stanley 222331 Flat U-Bolt Plate National Hardware N148-254 Flush/Full Inset Continuous Hinge National Hardware N148-270 Flush/Full Inset Continuous Hinge
Flat plates for use with square u-bolts. Do not use for overhead lifting, support of human weight, athletic or playground equipment. National Hardware Continuous Hinge, Flush/Full Inset, Series: V570, 30 in Door Leaf Length, 30 in Frame Leaf Length, Friction, Removable Pin, 0.9 in Diameter Pin, Steel Pin, Surface Mounting, Fasteners: NO 4 X 1/2 in Screw, 2 in Overall Width, Cold Rolled Steel, Brass, For Residential Applications National Hardware Continuous Hinge, Flush/Full Inset, Series: V570, 30 in Door Leaf Length, 30 in Frame Leaf Length, Friction, Removable Pin, 0.9 in Diameter Pin, Steel Pin, Surface Mounting, Fasteners: NO 4 X 1/2 in Screw, 2 in Overall Width, Cold Rolled Steel, Nickel Plated, For Residential Applications
Knape & Vogt 89 1-Piece Decorative Straight Shelf Kit HINGE S-H/STRP ZINC PLTD 8IN  Stanley 222356 Square Bend U-Bolt
One piece design, polished edge, radiused corners. Kit includes 1/4" tempered glass shelf, shelf anchor, mounting screws and easy-to-follow instructions. Designed for use on gates, utility sheds, barn doors, etc. Adjusts to correct gate sag. Gate can be lifted off the screw hooks. Strap punched for 5/16 In. or 3/8 In. bolts. Mounting bolts are NOT included. Manufactured from hot-rolled steel. Boxed loose barcoded. Supplied with straps and hex nuts assembled. For exterior and interior applications. Zinc plated steel resists rust.
National Hardware N148-304 Flush/Full Inset Continuous Hinge National Hardware N148-320 Flush/Full Inset Continuous Hinge HINGE STRAP GALV 8IN
CONT HINGE 1-1/2X48IN BRS
Our Price: $15.00
STRAP HINGES 8IN GALV
Our Price: $15.32
National Hardware Continuous Hinge, Flush/Full Inset, Series: V570, 48 in Door Leaf Length, 48 in Frame Leaf Length, Friction, Removable Pin, 0.9 in Diameter Pin, Steel Pin, Surface Mounting, Fasteners: NO 4 X 1/2 in Screw, 1-1/2 in Overall Width, Cold Rolled Steel, Brass, For Residential Applications National Hardware Continuous Hinge, Flush/Full Inset, Series: V570, 48 in Door Leaf Length, 48 in Frame Leaf Length, Friction, Removable Pin, 0.9 in Diameter Pin, Steel Pin, Surface Mounting, Fasteners: NO 4 X 1/2 in Screw, 1-1/2 in Overall Width, Cold Rolled Steel, Nickel Plated, For Residential Applications Offset screw holes for extra strength and to prevent wood from splitting. Tight pin for left or right hand applications. Manufactured with hot-rolled steel.
HINGE STRAP STEEL EX-HD 5IN SS Stanley 399720 Padlock/Hasp Combination Mintcraft LR343 U-Bolt
Ideal for doors, gates, sheds and toolboxes. Screws included. Use to help secure cabinets, sheds and store rooms. Corrugated leaf offers greater strength than conventional flat-leaf hasps. Rotating post discourages forced entry. Hardened steel shackle resists cutting and sawing. Zinc plating resists rust. Mintcraft U-Bolt, 1/4 in Thread, 3-1/2 in Inside Length, 1-1/8 in Inside Width, Steel, Zinc Plated, Includes: Nuts, NO 147
HINGE HASP HD ZN STL 4X1-3/4IN Mintcraft LR341 U-Bolt Mintcraft LR342 U-Bolt
Use to secure chests, cabinets, lockers and door corners. Rust resistant. Mintcraft U-Bolt, 1/4 in Thread, 2-1/2 in Inside Length, 3/4 in Inside Width, Steel, Zinc Plated, Includes: Nuts, NO 133 Mintcraft U-Bolt, 1/4 in Thread, 2-1/4 in Inside Length, 1-1/8 in Inside Width, Steel, Zinc Plated, Includes: Nuts, NO 143
Stanley 222364 Square Bend U-Bolt Knape & Vogt KT-0134-812SN Curved Shelf Kit 12 in L x 8 in W National Hardware V33 Extra Heavy Hinge Hasp
Supplied with straps and hex nuts assembled. For exterior and interior applications. Zinc plated steel resists rust. Features a tempered glass shelf, satin nickel wall clamps and mounting hardware included. National Hardware Hinge Hasp, Extra Heavy, Series: V33, 7.19 in Length, 1.88 in Height, Steel, Zinc Plated, Includes: Case Hardened Staple, BHMA A138.18 Certified, 7-1/4 in
National Hardware V571 Flush/Full Inset Continuous Hinge National Hardware V281 Flush/Full Inset Strap Hinge Stanley 248039 Hinge Strap
STRAP HINGES 6IN SS
Our Price: $16.84
National Hardware Continuous Hinge, Flush/Full Inset, Series: V571, 12 in Door Leaf Length, 12 in Frame Leaf Length, Removable Pin, Surface, Wall Mounting, 1-1/2 in Overall Width, Stainless Steel, Stainless Steel, BHMA A138.18, For Commercial/Industrial and Residential Applications National Hardware Strap Hinge, Flush/Full Inset, Heavy Duty, Series: V281, 6 in Door Leaf Length, 6 in Frame Leaf Length, Fixed Pin, Wall Mounting, Stainless Steel, Stainless Steel, BHMA A138.18, For Commercial/Industrial and Residential Applications Designed for new installations with Stanley's 130708, 130559, 130583, and 130617 hooks. Strap punched for 5/16" (6" and 8" sizes) or 3/8" (10", 12", 14", 16" 18", 20" and 24" sizes) bolts.
HINGE STRAP STEEL EX-HD 6IN SS Stanley 222208 U-Bolt Stanley 127357 Light Duty Strap Hinge
Ideal for doors, gates, sheds and toolboxes. Screws included. For use in exterior and interior applications. Steel resists rust. Plate and nut included. Offset screw holes for extra strength and to prevent wood from splitting. Tight pin for left or right hand applications. Steel with aluminum pin. Safe working load: 18 lbs. Boxed loose.
Mintcraft LR362 U-Bolt Stanley 130708 Full Threaded Bolt Hook HINGE STRAP STEEL EX-HD 4IN SS
Mintcraft U-Bolt, 5/16 in Thread, 2-1/2 in Inside Length, 1-3/8 in Inside Width, Steel, Zinc Plated, Includes: Nuts, NO 533 Adjust to correct gate sag. Includes 2 washers and 2 nuts per hook. Full threaded hook is bolted through the post and firmly secured with standard size nuts and washers on each side. As a replacement part: use with National's 292 Bold Hook. For new installations: use with National's #294 Hinge Straps. Use with the Stanley/National Strap size 14"(N130-799), 16"(N168-336), and the 18"(N248-039). Ideal for doors, gates, sheds and toolboxes. Screws included.
National Hardware N148-510 Flush/Full Inset Continuous Hinge National Hardware N148-536 Flush/Full Inset Continuous Hinge HINGE CONT BRT NICKEL 1-1/2X72
National Hardware Continuous Hinge, Flush/Full Inset, Series: V570, 72 in Door Leaf Length, 72 in Frame Leaf Length, Friction, Removable Pin, 0.9 in Diameter Pin, Steel Pin, Surface Mounting, Fasteners: NO 4 X 1/2 in Screw, 1-1/16 in Overall Width, Cold Rolled Steel, Brass, For Residential Applications National Hardware Continuous Hinge, Flush/Full Inset, Series: V570, 72 in Door Leaf Length, 72 in Frame Leaf Length, Friction, Removable Pin, 0.9 in Diameter Pin, Steel Pin, Surface Mounting, Fasteners: NO 4 X 1/2 in Screw, 1-1/16 in Overall Width, Cold Rolled Steel, Nickel Plated, For Residential Applications Medium gauge construction for use on lids, table leaves and cabinet doors.
Mintcraft LR344 U-Bolt CART LAUNDRY 3-TIER WHITE     Knape & Vogt KT-0134-1212SN Decorative Corner Glass Shelf Kit
Mintcraft U-Bolt, 5/16 in Thread, 4 in Inside Length, 1-3/8 in Inside Width, Steel, Zinc Plated, Includes: Nuts For any room. Slim design fits in the smallest spaces. Easy to assemble and takes up minimal floor space. Basket style shelves are large enough to accommodate full size detergent bottles. Dimensions: 23.23 in L x 7.87 in W x 31.3 in. PE coating white. 1/4" Tempered glass for strength and safety. Satin nickel wall clamps and mounting hardware included.
Knape & Vogt KT-0134-624SN Straight Decorative Shelf Kit HINGE CONT BRT BRASS 1-1/2X48 Mintcraft LR364 U-Bolt
Features a tempered glass shelf, satin nickel wall clamps and mounting hardware included. Medium gauge construction for use on lids, table leaves and cabinet doors. Mintcraft U-Bolt, 5/16 in Thread, 3 in Inside Length, 1-3/4 in Inside Width, Steel, Zinc Plated, Includes: Nuts, NO 563
HINGE STRAP STEEL HD 6IN GALV Mintcraft LR363 U-Bolt National Hardware N148-460 Flush/Full Inset Continuous Hinge
CONT HINGE 1-1/2X72IN BRS
Our Price: $20.51
Ideal for doors, gates, sheds and toolboxes. Screws included. Mintcraft U-Bolt, 5/16 in Thread, 3-3/4 in Inside Length, 1-3/8 in Inside Width, Steel, Zinc Plated, Includes: Nuts, NO 557 National Hardware Continuous Hinge, Flush/Full Inset, Series: V570, 72 in Door Leaf Length, 72 in Frame Leaf Length, Friction, Removable Pin, 0.9 in Diameter Pin, Steel Pin, Surface Mounting, Fasteners: NO 4 X 1/2 in Screw, 1-1/2 in Overall Width, Cold Rolled Steel, Brass, For Residential Applications
National Hardware N148-486 Flush/Full Inset Continuous Hinge Knape & Vogt 89 1-Piece Decorative Straight Shelf Kit HINGE S-H/STRP ZINC PLTD 10IN
National Hardware Continuous Hinge, Flush/Full Inset, Series: V570, 72 in Door Leaf Length, 72 in Frame Leaf Length, Friction, Removable Pin, 0.9 in Diameter Pin, Steel Pin, Surface Mounting, Fasteners: NO 4 X 1/2 in Screw, 1-1/2 in Overall Width, Cold Rolled Steel, Nickel Plated, For Residential Applications One piece design, polished edge, radiused corners. Kit includes 1/4" tempered glass shelf, shelf anchor, mounting screws and easy-to-follow instructions. Designed for use on gates, utility sheds, barn doors, etc. Adjusts to correct gate sag. Gate can be lifted off the screw hooks. Strap punched for 5/16 In. or 3/8 In. bolts. Mounting bolts are NOT included. Manufactured from hot-rolled steel. Boxed loose barcoded.
Mintcraft LSH-Z04-013L Light Duty Strap Hinge HINGE CONT BRT NICKEL 1-1/2X48 National Hardware N148-403 Flush/Full Inset Continuous Hinge
Use in both the interior and exterior. Rust resistant. Medium gauge construction for use on lids, table leaves and cabinet doors. National Hardware Continuous Hinge, Flush/Full Inset, Series: V570, 48 in Door Leaf Length, 48 in Frame Leaf Length, Friction, Removable Pin, 0.9 in Diameter Pin, Steel Pin, Surface Mounting, Fasteners: NO 4 X 1/2 in Screw, 2 in Overall Width, Cold Rolled Steel, Brass, For Residential Applications
National Hardware N148-429 Flush/Full Inset Continuous Hinge Mintcraft LR365 U-Bolt Mintcraft LR350 Square Bend U-Bolt
National Hardware Continuous Hinge, Flush/Full Inset, Series: V570, 48 in Door Leaf Length, 48 in Frame Leaf Length, Friction, Removable Pin, 0.9 in Diameter Pin, Steel Pin, Surface Mounting, Fasteners: NO 4 X 1/2 in Screw, 2 in Overall Width, Cold Rolled Steel, Nickel Plated, For Residential Applications Mintcraft U-Bolt, 5/16 in Thread, 4-1/8 in Inside Length, 1-3/8 in Inside Width, Steel, Zinc Plated, Includes: Nuts, NO 567 Mintcraft U-Bolt, Square Bend, 5/16 in Thread, 3 in Inside Length, 2 in Inside Width, Steel, Zinc Plated, Includes: Nuts, NO 533
National Hardware V571 Flush/Full Inset Continuous Hinge Mintcraft LR345 U-Bolt Mintcraft LR346 U-Bolt
National Hardware Continuous Hinge, Flush/Full Inset, Series: V571, 30 in Door Leaf Length, 30 in Frame Leaf Length, Removable Pin, Surface, Wall Mounting, 1-1/2 in Overall Width, Stainless Steel, Stainless Steel, BHMA A138.18, For Commercial/Industrial and Residential Applications Mintcraft U-Bolt, 5/16 in Thread, 3-5/8 in Inside Length, 2 in Inside Width, Steel, Zinc Plated, Includes: Nuts, NO 569 Mintcraft U-Bolt, 5/16 in Thread, 2 in Inside Length, 3 in Inside Width, Steel, Zinc Plated, Includes: Nuts, NO 573
National Hardware V31 Rust Resistant Safety Hasp HINGE STRAP ZINC PLATED 12IN  HINGE S-H/STRP ZINC PLTD 12IN
SAFETY HASPS 7-1/2IN SS
Our Price: $22.45
STRAP HINGES 12IN ZN PLT
Our Price: $22.66
National Hardware Safety Hasp, Heavy Duty, Rust Resistant, Series: V31, 7-1/2 in Length, Stainless Steel, Gray, Includes: Fasteners, BHMA A138.18 Certified, For Doors, Chests and Lockers National Strap Hinge, Heavy Duty, Wall Mounting, 12 in Overall Length, 12 ga Steel, Zinc-Plated, For Home, Farm, Builder or Industrial Customers Designed for use on gates, utility sheds, barn doors, etc. Adjusts to correct gate sag. Gate can be lifted off the screw hooks. Strap punched for 5/16 In. or 3/8 In. bolts. Mounting bolts are NOT included. Manufactured from hot-rolled steel. Boxed loose barcoded.
Stanley 248047 Hinge Strap HASP SAFETY GALV 7-1/4IN      Mintcraft LR347 U-Bolt
SAFETY HASPS 7-1/4IN GALV
Our Price: $23.50
Designed for new installations with Stanley's 130708, 130559, 130583, and 130617 hooks. Strap punched for 5/16" (6" and 8" sizes) or 3/8" (10", 12", 14", 16" 18", 20" and 24" sizes) bolts. Stanley Swivel Safety Hasp, Series: V33, Extra Heavy Duty, 1 Locking Holes, 7-1/4 in Length, Steel, Galvanized, For Storage Sheds, Warehouse Doors, Cabins and Trailers Mintcraft U-Bolt, 5/16 in Thread, 4-5/8 in Inside Length, 2 in Inside Width, Steel, Zinc Plated, Includes: Nuts, NO 577
Stanley 127506 Light Duty Strap Hinge Mintcraft LR351 Square Bend U-Bolt HINGE CONT BRT BRASS 1-1/2X72
Offset screw holes for extra strength and to prevent wood from splitting. Tight pin for left or right hand applications. Steel with aluminum pin. Safe working load: 18 lbs. Boxed loose. Mintcraft U-Bolt, Square Bend, 5/16 in Thread, 5 in Inside Length, 2 in Inside Width, Steel, Zinc Plated, Includes: Nuts, NO 535 Medium gauge construction for use on lids, table leaves and cabinet doors.
Stanley 222380 Square Bend U-Bolt Mintcraft LR348 U-Bolt National Hardware N148-569 Flush/Full Inset Continuous Hinge
Supplied with straps and hex nuts assembled. For exterior and interior applications. Zinc plated steel resists rust. Mintcraft U-Bolt, 5/16 in Thread, 3-1/2 in Inside Length, 2-1/2 in Inside Width, Steel, Zinc Plated, Includes: Nuts, NO 583 National Hardware Continuous Hinge, Flush/Full Inset, Series: V570, 72 in Door Leaf Length, 72 in Frame Leaf Length, Friction, Removable Pin, 0.9 in Diameter Pin, Steel Pin, Surface Mounting, Fasteners: NO 4 X 1/2 in Screw, 2 in Overall Width, Cold Rolled Steel, Brass, For Residential Applications
National Hardware N148-585 Flush/Full Inset Continuous Hinge HINGE STRAP STEEL HD 8IN GALV Stanley 222398 Square Bend U-Bolt
National Hardware Continuous Hinge, Flush/Full Inset, Series: V570, 72 in Door Leaf Length, 72 in Frame Leaf Length, Friction, Removable Pin, 0.9 in Diameter Pin, Steel Pin, Surface Mounting, Fasteners: NO 4 X 1/2 in Screw, 2 in Overall Width, Cold Rolled Steel, Nickel Plated, For Residential Applications Ideal for doors, gates, sheds and toolboxes. Screws included. Supplied with straps and hex nuts assembled. For exterior and interior applications. Zinc plated steel resists rust.
Stanley 222372 Square Bend U-Bolt Mintcraft LSH-Z06-013L Light Duty Strap Hinge Mintcraft HSH-Z04-013L Strap Hinge
Supplied with straps and hex nuts assembled. For exterior and interior applications. Zinc plated steel resists rust. Use in both the interior and exterior. Rust resistant. Reinforces doors, gates and sheds.
Mintcraft HSH-Z08-013L Strap Hinge Mintcraft LR356 Square Bend U-Bolt Stanley 222406 Square Bend U-Bolt
Reinforces doors, gates and sheds. Mintcraft U-Bolt, Square Bend, 3/8 in Thread, 5 in Inside Length, 4 in Inside Width, Steel, Zinc Plated, Includes: Nuts, NO 675 Supplied with straps and hex nuts assembled. For exterior and interior applications. Zinc plated steel resists rust.
Mintcraft LR354 Square Bend U-Bolt Mintcraft LR355 Square Bend U-Bolt Mintcraft HSH-Z05-013L Strap Hinge
Mintcraft U-Bolt, Square Bend, 3/8 in Thread, 3 in Inside Length, 4 in Inside Width, Steel, Zinc Plated, Includes: Nuts, NO 673 Mintcraft U-Bolt, Square Bend, 3/8 in Thread, 7 in Inside Length, 4 in Inside Width, Steel, Zinc Plated, Includes: Nuts, NO 677 Reinforces doors, gates and sheds.
Closetmaid 1611 Rolling Cart Homebasix SS-120-02-CH 2-Tier Shelf Stacker Mintcraft LR349 U-Bolt
Offers 4 fixed basket/shelves. Casters included. Perfect for office, laundry, kitchen, bath or anywhere. All hardware included. 34.62?H x 16.75?W x 12.37?D. Material: Epoxy coated steel. Adjustable shelves and leveling feet. Easy snap together assembly. Size: 23"H x 23"W x 13"D. Mintcraft U-Bolt, 5/16 in Thread, 5-1/8 in Inside Length, 2-1/2 in Inside Width, Steel, Zinc Plated, Includes: Nuts, NO 587
Mintcraft LR352 Square Bend U-Bolt Mintcraft LR353 Square Bend U-Bolt Mintcraft HSH-Z06-013L Strap Hinge
Mintcraft U-Bolt, Square Bend, 5/16 in Thread, 7 in Inside Length, 2 in Inside Width, Steel, Zinc Plated, Includes: Nuts, NO 537 Mintcraft U-Bolt, Square Bend, 3/8 in Thread, 7 in Inside Length, 3 in Inside Width, Steel, Zinc Plated, Includes: Nuts, NO 657 Reinforces doors, gates and sheds.
Homebasix G003-CH Storage Cart CONTINUOUS HINGE 1-1/2X48IN SS SHELVING BOLTLESS 30WX15DX60H
Rolling  cart with 3 white plastic drawers and mirror polished chrome frame. Size: 25-5/8" x 13" x 15-3/8". Friction type pin will not fall out. Surface mount for easy installation. Manufactured from stainless steel with stainless steel pin for corrosion resistance. Can be cut to desired length. Low profile beams to provide more storage space between shelves. Double rivet beams at top and bottom of unit form a rigid structure. Shelves are adjustable in 1-1/2" increments. No nuts, bolts or shelf clips. For garage, industrial, basement, warehouse and office. 1/4" MDF decking. Commercial strength 16 gauge posts. Can be assembled as a 60" unit or two 30" workbenches. 450 lbs. weight capacity per shelf.
Homebasix G006-CH Storage Cart Mintcraft HSH-Z10-013L Strap Hinge SHELVING BOLTLS MD 5SHLF 450LB
Rolling cart with 6 colorful plastic drawers and mirror polished chrome frame. Size: 26" x 13" x 15-3/8". Reinforces doors, gates and sheds. Low profile beams to provide more storage space between shelves. Double rivet beams at top and bottom of unit form a rigid structure. Shelves are adjustable in 1-1/2" increments. No nuts, bolts or shelf clips. For garage, industrial, basement, warehouse and office. 1/4" MDF decking. Commercial strength 16 gauge posts. Can be assembled as a 60" unit or two 30" workbenches. 450 lbs. weight capacity per shelf.
CONTINUOUS HINGE 1-1/2X72IN SS Homebasix G005-CH Storage Cart SHELVING BOLTLESS 36WX18DX72H
Friction type pin will not fall out. Surface mount for easy installation. Manufactured from stainless steel with stainless steel pin for corrosion resistance. Can be cut to desired length. Rolling cart with 5 white plastic drawers and mirror polished chrome frame. Size: 38-1/4" x 13" x 15-3/8". Low profile beams to provide more storage space between shelves. Double rivet beams at top and bottom of unit form a rigid structure. Shelves are adjustable in 1-1/2" increments. No nuts, bolts or shelf clips. For garage, industrial, basement, warehouse and office. 3/8" particle board decking. 16 gauge posts.  Can be assembled as a 72" unit or Two 36" workbenches. 800 lbs. weight capacity per shelf.
Homebasix SS-JR0404-WH 4-Tier Shelf Stacker SuperSlide 2057 Closet Rod SHELVING BOLTLESS 48WX24DX72H
Adjustable shelves and leveling feet. Easy snap together assembly. Size: 48-1/4"H x 31"W x 13"D . Snaps into the Closet Rod Support to allow hangers to slide without interruption. Can be cut to customize length . Holds up to 30lbs per foot. Material: Epoxy coated steel. Low profile beams to provide more storage space between shelves. Double rivet beams at top and bottom of unit form a rigid structure. Shelves are adjustable in 1-1/2" increments. No nuts, bolts or shelf clips. For garage, industrial, basement, warehouse and office. 3/8" particle board decking. 16 gauge posts.  Can be assembled as a 72" unit or Two 36" workbenches. 800 lbs. weight capacity per shelf.
Closetmaid 6201 Drawer Kit Closetmaid 6222 Hang Basket Mintcraft HSH-Z12-013L Strap Hinge
Kit includes 4 baskets - a 4 in. deep and three 7 in. deep baskets, 7-runner frame set and crossbars. Tops, casters, and other accessories sold separately. Smooth gliding action. All hardware included. 29.318"H x 17.8"W x 21.019"D. Material: Epoxy coated steel. 17 in. wide hanging basket instantly creates additional storage. Hang multiple baskets. This sturdy wire bin does not need additional hardware; hooks directly to shelf. Perfect to use under the 24 in. or wider wire shelves. Fits any wire shelving. Material: Epoxy coated steel. Reinforces doors, gates and sheds.
Closetmaid 77545 Shelf End Cap RACK SHELF 4-TIER 60 INCH     RACK BULK HVDY 3-SHELF 1350LB
RACK SHELF 4-TIER 60 INCH
Our Price: $199.51
These end caps cover both ends of 0 gauge wire of ClosetMaid - Shelf & Rod ventilated shelving. End caps keep hangers from sliding off exposed ends. 0.5"H x 2"W x 0.5"D Storage unit is fast and easy to assemble at home, and does not require tools. Welded steel frame features four metal shelves and the dual slot profile allows for additional supports and shelves. Z-Shaped beams provide additional strength and rigidity. Shelves are adjustable in 1-1/2" increments. No nuts, bolts or shelf clips. For garage, industrial, basement, warehouse and office. 1/2" particle board decking. Commercial strength 16 gauge posts. Load capacity: 1350 lbs. per shelf.
Gladiator GARS774SZG Rack Shelf
Storage unit is fast and easy to assemble at home, and does not require tools. Welded steel frame features four metal shelves and the dual slot profile allows for additional supports and shelves.
   
 
1