Home > HARDWARE > BUILDERS HARDWARE > HINGES > TEE HINGES / T-HINGE
Sort By:
1
SuperSlide 948 Pre-Loaded Wall Bracket T-HINGE ZINC PLATED 2IN       National Hardware 284BC Flush/Full Inset Light T Hinge
T HINGES 2IN ZN PLT
Our Price: $1.65
T HINGES 3IN ZN PLT
Our Price: $1.89
Secures shelf to side wall of closet. Pre-loaded with pins and anchors, no screws needed. Accommodates pole clips and shelf stops in "TotalSlide" system. Offset screw holes for extra strength and to prevent wood from splitting. Tight pin for left or right hand applications. Steel with aluminum pin. Safe working load: 18 lbs. Visual-pack. National Hardware T Hinge, Flush/Full Inset, Light, Series: 284BC, 6 Holes, 0.21 in Hole Diameter, 0.056 in Leaf Thickness, 3 in Door Leaf Length, 0.69 in Frame Leaf Length, 2.24 in Frame Leaf Width, 0.17 in Diameter Pin, Aluminum Pin, Wall Mounting, Fasteners: NO 6 Flat Headed Screw, 18 lb Load Capacity, 2.34 in Overall Width, Hot Rolled Steel
T-HINGE ZINC PLATED 4IN       HASP SAFETY ZINC PLT 2-1/2IN  SuperSlide 6609 Pre-Loaded Wall Bracket
T HINGES 4IN ZN PLT
Our Price: $2.38
Offset screw holes for extra strength and to prevent wood from splitting. Tight pin for left or right hand applications. Steel with aluminum pin. Safe working load: 18 lbs. Visual-pack. Non- swiveling. Adds security for doors, cabinets and gates. Rust resistant. Heavy duty preloaded wall bracket with anchor, mounts to the side wall and holds the end of the SuperSlide shelf and Hang Rod. Supports front lip of shelving and hang rod where they meet the side wall. With pre-loaded pins. For drywall installations. 4.125"H x 1.75"W x 2"D. Material: Resin.
T-HINGE ZINC PLATED 5IN       T-HINGE LD STEEL 2IN ZINC PLTD Closetmaid 6610 Wall Clip
T HINGES 5IN ZN PLT
Our Price: $3.03
Offset screw holes for extra strength and to prevent wood from splitting. Tight pin for left or right hand applications. Steel with aluminum pin. Safe working load: 18 lbs. Visual-pack. For use on tool boxes, storage chests and small shed doors. Anchors shelf to wall. Ensures stability of shelf.
Closetmaid 1002 Joiner Plate SuperSlide 5655 Closet Rod Support National Hardware V30 Non-Swivel Safety Hasp
Use to join 2 shelves together to create a continuous run of shelving. Supports the joining of 2 wire shelves. One set consists of 2 joiner plates, 1 bolt and 1 nut. NOT for use with Close Mesh shelving. 1.19?H x 2.25?W x 1.13?D. Material: Resin. Converts shelf & rod shelving to a continous slide. Hang rod snaps into bracket to create an continuous slide for hangers. Snaps onto SuperSlide shelf to support hang rod. Use one every 36 in. (91,44cm) of hang rod and at each end of shelf and hang rod. 5.75"H x 0.87"W x 3.87"D. Material: Resin. National Hardware Safety Hasp, Non-Swivel, Series: V30, 0.34 in Diameter X 0.62 in Height Shackle, 2.43 in Length, 3/4 in Height, Hot Rolled Steel, Zinc Plated, Includes: Rigid Non-Swivel Staple, BHMA A138.18 Certified, 1-3/4 in, For Securing a Wide Variety of Doors, Cabinets, Boxes and Trunks
HASP SAFETY GALV 2-1/2IN      National Hardware V30 Non-Swivel Safety Hasp T-HINGE ZINC PLATED 6IN
T HINGES 6IN ZN PLT
Our Price: $3.56
Non- swiveling. Adds security for doors, cabinets and gates. Rust resistant. National Hardware Safety Hasp, Non-Swivel, Series: V30, 0.35 in Diameter X 0.7 in Height Shackle, 3.57 in Length, 1 in Height, Hot Rolled Steel, Zinc Plated, Includes: Rigid Non-Swivel Staple, BHMA A138.18 Certified, 2-1/2 in, For Securing a Wide Variety of Doors, Cabinets, Boxes and Trunks Offset screw holes for extra strength and to prevent wood from splitting. Tight pin for left or right hand applications. Steel with aluminum pin. Safe working load: 18 lbs. Visual-pack.
HASP SAFETY 3IN ZN PLT STEEL  SuperSlide 75651 Closet Rod Connector Closetmaid 6620 Wall Bracket
Use on doors, cabinets and gates with a 90 degree corner. Rust resistant. Use with SuperSlide shelving to create uninterrupted sliding action around corners for walk-in closets. Keeps hangers from sliding off exposed ends. Support the connection of the two pieces of hang rod with a hang bar support. 2"H x 0.5"W x 0.5"D. Material: Plastic. Heavy duty preloaded bracket with anchor easily mounts to the wall and holds the end of any size ClosetMaid shelf. Provides side wall support. Supports front lip of shelving where it meets the side wall. For drywall installations. Includes: 2.875"H x 2.125"W x 1.75"D. Material: Resin.
National Hardware V30 Non-Swivel Safety Hasp HASP SAFETY ADJ ZINC 3-1/2IN  HASP SAFETY ZINC STEEL 3-1/2IN
National Hardware Safety Hasp, Non-Swivel, Series: V30, 0.44 in Diameter X 0.9 in Height Shackle, 4.56 in Length, 1-1/2 in Height, Hot Rolled Steel, Zinc Plated, Includes: Rigid Non-Swivel Staple, BHMA A138.18 Certified, 3-1/4 in, For Securing a Wide Variety of Doors, Cabinets, Boxes and Trunks Screws are concealed when hasp is locked. Rust resistant. Zinc plated. Adjustable staple. Use on cabinets, doors and gates. Mounting screws are concealed when the hasp is closed.
Closetmaid 1180 Support Bracket National Hardware V30 Non-Swivel Safety Hasp National Hardware V288 Hinge Hasp
HINGE HASPS 3IN ZN PLT
Our Price: $4.04
Closetmaid Support Bracket, 12 in Length, 2 in Width, 2 in Depth, Steel, Epoxy Coated, White, Suitable For Use With: Wire Shelving, Includes: (1) Support Bracket, (1) Anchor, (1) NO 8 Pin National Hardware Safety Hasp, Non-Swivel, Series: V30, 0.35 in Diameter X 0.7 in Height Shackle, 3.57 in Length, 1 in Height, Hot Rolled Steel, Brass, Includes: Rigid Non-Swivel Staple, 2-1/2 in, For Securing a Wide Variety of Doors, Cabinets, Boxes and Trunks National Hardware Hinge Hasp, Series: V288, 3/4 in Height Shackle, 5-1/4 in Length, 1-5/32 in Height, Hot Rolled Steel, Aluminum Pin, Zinc Plated, BHMA A138.18 Certified, 3 in, For Regular or Around the Corner Applications
SuperSlide 6641 Wall Bracket Master Lock 702D High Security Hasp HASP SAFETY ZINC PLT 3-1/2IN
Supports low profile SuperSlide shelving in a wall to wall installation. Includes: 2 wall brackets, 4 pins and 4 anchors. Use in conjunction with support brackets and wall clips for installing wire shelving. Suports front lip of shelving where it meets the side wall. 2"H x 2.19W x 1.75"D. Material: Resin High security pinless hinge. Non- swiveling. Adds security for doors, cabinets and gates. Rust resistant.
Closetmaid 1001 Corner Support Bracket HASP SAFETY ZN STL 4-1/2IN    HASP SAFETY ZINC PLT FN 4-1/2
Supports front lip of shelving to keep it level where it meets another shelf in a corner. Snap in place design. For corner installations.  0.375?H x 5?W x 0.75?D. Material: steel, coated with epoxy. Screws are concealed when hasp is locked. Rust resistant. Zinc plated. Adjustable staple. Non- swiveling. Adds security for doors, cabinets and gates. Rust resistant.
T-HINGE LD STEEL 3IN ZINC PLTD National Hardware 286BC Extra Heavy Flush/Full Inset T Hinge HASP SAFETY 4-1/2IN ZINC STL
T HINGES 4IN ZN PLT
Our Price: $4.71
For use on tool boxes, storage chests and small shed doors. National Hardware T Hinge, Extra Heavy, Flush/Full Inset, Series: 286BC, 0.076 in Leaf Thickness, 4 in Door Leaf Length, 1.55 in Door Leaf Width, 3.3 in Frame Leaf Length, 1.32 in Frame Leaf Width, 0.222 in Diameter Pin, Wall Mounting, Fasteners: NO 9 Flat Head Screw, 60 lb Load Capacity, Hot Rolled Steel, Zinc Plated, BHMA A138.18 Use on doors, cabinets and gates with a 90 degree corner. Rust resistant.
T-HINGE LD STEEL 4IN ZINC PLTD Stanley 221945 Hook and Eye Turnbuckle Stanley 221820 Eye and Eye Turnbuckle
For use on tool boxes, storage chests and small shed doors. Designed for tightening or drawing together various lines and cables. Ideal for marine and other outdoor applications. Strong, rust resistant body with steel eye and hook bolts. Clear coated aluminum body. Strong, rust resistant body and steel eye bolts. Designed for tightening or drawing together various lines and cables. Ideal for marine and other outdoor applications.
Hi-Security 703D High Security Latching Hasp HASP SAFETY ZINC STEEL 4-1/2IN National Hardware V30 Non-Swivel Safety Hasp
High security pinless hinge. Use on cabinets, doors and gates. Mounting screws are concealed when the hasp is closed. National Hardware Safety Hasp, Non-Swivel, Series: V30, 0.44 in Diameter X 0.9 in Height Shackle, 4.56 in Length, 1-1/2 in Height, Hot Rolled Steel, Brass, Includes: Rigid Non-Swivel Staple, 3-1/4 in, For Securing a Wide Variety of Doors, Cabinets, Boxes and Trunks
Hi-Security 704D High Security Latching Hasp National Hardware V288 Hinge Hasp HASP SAFETY SAT BRS 2-1/2X1IN
HINGE HASPS 4IN ZN PLT
Our Price: $5.06
High security pinless hinge. National Hardware Hinge Hasp, Series: V288, 3/4 in Height Shackle, 6-1/4 in Length, 1-1/4 in Height, Hot Rolled Steel, Aluminum Pin, Zinc Plated, BHMA A138.18 Certified, 4 in, For Regular or Around the Corner Applications Fixed staple. Use on doors, cabinets and gates.
National Hardware V30 Non-Swivel Safety Hasp National Hardware V30 Corrosion Resistant Safety Hasp National Hardware V284 Flush/Full Inset Light T Hinge
T HINGES 2IN ZN PLT
Our Price: $5.33
National Hardware Safety Hasp, Non-Swivel, Series: V30, 0.44 in Diameter X 0.9 in Height Shackle, 5.68 in Length, 1-1/2 in Height, Hot Rolled Steel, Zinc Plated, Includes: Rigid Non-Swivel Staple, BHMA A138.18 Certified, 4-1/2 in, For Securing a Wide Variety of Doors, Cabinets, Boxes and Trunks National Hardware Safety Hasp, Corrosion Resistant, Series: V30, 0.44 in Diameter Shackle, 4.56 in Length, 1-1/2 in Height, Hot Rolled Steel, Black, Includes: Rigid Non-Swivel Staple, For Doors, Cabinets, Boxes and Trunks National Hardware Light T Hinge, Flush/Full Inset, Series: V284, 6 Holes, 0.2 in Hole Diameter, 0.048 in Leaf Thickness, 2 in Door Leaf Length, 0.54 in Frame Leaf Length, 1.81 in Frame Leaf Width, 0.119 in Diameter Pin, Aluminum Pin, Wall Mounting, Fasteners: NO 6 Flat Head Screw, 18 lb Load Capacity, 1.91 in Overall Width, Hot Rolled Steel
HASP SAFETY GALV 3-1/2IN      Closetmaid 7561 U-Shape Shelf Clip National Hardware 286BC Extra Heavy Flush/Full Inset T Hinge
T HINGES 6IN ZN PLT
Our Price: $5.61
Non- swiveling. Adds security for doors, cabinets and gates. Rust resistant. Attaches to the back of shelving to anchor shelf to back wall. Shelf clip "locks" shelving into place - attaching it at the top and bottom of shelf wire with or instead of wall clips. For concrete/stud and drywall installation. Material: Metal. National Hardware T Hinge, Extra Heavy, Flush/Full Inset, Series: 286BC, 0.095 in Leaf Thickness, 6 in Door Leaf Length, 2.15 in Door Leaf Width, 4-1/4 in Frame Leaf Length, 1.83 in Frame Leaf Width, 0.326 in Diameter Pin, Wall Mounting, Fasteners: NO 12 Flat Head Screw, 83 lb Load Capacity, Hot Rolled Steel, Zinc Plated, BHMA A138.18
Closetmaid 26607 Support Bracket HASP SAFETY GALV 4-1/2IN      National Hardware V284 Flush/Full Inset Light T Hinge
T HINGES 3IN ZN PLT
Our Price: $5.74
Preloaded with #8 pin drive and anchors. No.6606, 71925 and No. 21775. - For Organizer, Wardrobe, SuperSlide and Close Mesh Shelves 12" in depth; and Wardrobe or hanging SuperSlide shelves 16" in depth. No. 26607, 71924, and No.21776 - For Organizer, SuperSlide (in storage application), and Close Mesh shelves 16" in depth. No.26605 - For Organizer, Wardrobe, SuperSlide and Close Mesh Shelves 20" in depth. Non- swiveling. Adds security for doors, cabinets and gates. Rust resistant. National Hardware Light T Hinge, Flush/Full Inset, Series: V284, 6 Holes, 0.21 in Hole Diameter, 0.056 in Leaf Thickness, 3 in Door Leaf Length, 0.69 in Frame Leaf Length, 2.24 in Frame Leaf Width, 0.17 in Diameter Pin, Aluminum Pin, Wall Mounting, Fasteners: NO 6 Flat Head Screw, 18 lb Load Capacity, 2.34 in Overall Width, Hot Rolled Steel
National Hardware 286BC Extra Heavy Flush/Full Inset T Hinge HASP SAFETY 3-1/2IN ZINC STL  HASP SAFETY 4-1/2IN ZINC STL
T HINGES 5IN ZN PLT
Our Price: $5.74
National Hardware T Hinge, Extra Heavy, Flush/Full Inset, Series: 286BC, 0.28 in Hole Diameter, 0.09 in Leaf Thickness, 5 in Door Leaf Length, 1.91 in Door Leaf Width, 3-3/4 in Frame Leaf Length, 1.6 in Frame Leaf Width, 0.272 in Diameter Pin, Wall Mounting, Fasteners: NO 9 Flat Head Screw, 70 lb Load Capacity, Hot Rolled Steel, Zinc Plated Latches without a padlock. All screws are  concealed when locked for added security. Latches without a padlock. All screws are  concealed when locked for added security.
HASP SAFETY HINGE DBL 3-1/2 IN National Hardware V284 Flush/Full Inset Light T Hinge Closetmaid 7546 Down Clip/Anchor
T HINGES 4IN ZN PLT
Our Price: $6.16
Use to secure chests, cabinets, lockers and door corners. Rust resistant. National Hardware Light T Hinge, Flush/Full Inset, Series: V284, 6 Holes, 0.23 in Hole Diameter, 0.056 in Leaf Thickness, 4 in Door Leaf Length, 3/4 in Frame Leaf Length, 2.44 in Frame Leaf Width, 0.195 in Diameter Pin, Aluminum Pin, Wall Mounting, Fasteners: NO 7 Flat Head Screw, 2.54 in Overall Width, Hot Rolled Steel, Zinc Plated, BHMA A138.18 Attaches to the back of shelving to anchor shelf to back wall. For concrete/stud and drywall installation. Package includes 12 clips, 12 anchors and 12 #8 screws.
HASP SAFETY ZINC PLT FN 6IN   Stanley 221952 Hook and Eye Turnbuckle Stanley 221838 Eye and Eye Turnbuckle
Non- swiveling. Adds security for doors, cabinets and gates. Rust resistant. Designed for tightening or drawing together various lines and cables. Ideal for marine and other outdoor applications. Strong, rust resistant body with steel eye and hook bolts. Clear coated aluminum body. Strong, rust resistant body and steel eye bolts. Designed for tightening or drawing together various lines and cables. Ideal for marine and other outdoor applications.
National Hardware V30 Corrosion Resistant Safety Hasp HINGE HASP ZINC PLATED 6IN    T-HINGE LD STEEL 6IN ZINC PLTD
HINGE HASPS 6IN ZN PLT
Our Price: $6.66
National Hardware Safety Hasp, Corrosion Resistant, Series: V30, 0.44 in Diameter Shackle, 5.68 in Length, 1-1/2 in Height, Hot Rolled Steel, Black, Includes: Rigid Non-Swivel Staple, For Doors, Cabinets, Boxes and Trunks Stanley Hinge Hasp, Series: V288, 1 Locking Holes, 6 in Length, Hot Rolled Steel, Zinc-Plated, For Regular or Around The Corner Applications For use on tool boxes, storage chests and small shed doors.
HASP SAFETY 6IN SWVL ZINC STL Closetmaid 26605 Support Bracket National Hardware V30 Non-Swivel Safety Hasp
SAFETY HASPS 6IN ZN PLT
Our Price: $7.07
Latches without a padlock. All screws are  concealed when locked for added security. Preloaded with #8 pin drive and anchors. No.6606, 71925 and No. 21775. - For Organizer, Wardrobe, SuperSlide and Close Mesh Shelves 12" in depth; and Wardrobe or hanging SuperSlide shelves 16" in depth. No. 26607, 71924, and No.21776 - For Organizer, SuperSlide (in storage application), and Close Mesh shelves 16" in depth. No.26605 - For Organizer, Wardrobe, SuperSlide and Close Mesh Shelves 20" in depth. National Hardware Safety Hasp, Non-Swivel, Series: V30, 0.44 in Diameter X 0.9 in Height Shackle, 8.68 in Length, 1-3/4 in Height, Hot Rolled Steel, Zinc Plated, Includes: Rigid Non-Swivel Staple, BHMA A138.18 Certified, 6 in, For Securing a Wide Variety of Doors, Cabinets, Boxes and Trunks
National Hardware V32 Swivel Staple Safety Hasp National Hardware V34 Double Hinge Safety Hasp T-HINGE STL FXPIN LD 4 IN GALV
National Hardware Safety Hasp, Swivel Staple, Series: V32, 0.41 in Diameter X 1.2 in Height Shackle, 4.48 in Length, 1-1/2 in Height, Hot Rolled Steel, Aluminum Pin, Zinc Plated, BHMA A138.18 Certified, 3-1/4 in, For Securing a Wide Variety of Doors, Cabinets, Boxes and Trunks National Hardware Safety Hasp, Double Hinge, Series: V34, 6-1/4 in Length, 1-1/2 in Height, Cold Rolled Steel, Aluminum Pin, Zinc Plated, Includes: Rigid Non-Swivel Staple, BHMA A138.18 Certified, 3-1/4 in, For Around the Corner Applications on Lockers, Chests, Tool Boxes and Doors Used for interior or exterior applications. Rust-resistant.
Closetmaid 6606 Support Bracket HASP SAFETY HINGE DBL 4-1/2IN National Hardware V32 Swivel Staple Safety Hasp
Preloaded with #8 pin drive and anchors. No.6606, 71925 and No. 21775. - For Organizer, Wardrobe, SuperSlide and Close Mesh Shelves 12" in depth; and Wardrobe or hanging SuperSlide shelves 16" in depth. No. 26607, 71924, and No.21776 - For Organizer, SuperSlide (in storage application), and Close Mesh shelves 16" in depth. No.26605 - For Organizer, Wardrobe, SuperSlide and Close Mesh Shelves 20" in depth. Use to secure chests, cabinets, lockers and door corners. Rust resistant. National Hardware Safety Hasp, Swivel Staple, Series: V32, 0.41 in Diameter X 1.2 in Height Shackle, 5.61 in Length, 1-1/2 in Height, Hot Rolled Steel, Aluminum Pin, Zinc Plated, BHMA A138.18 Certified, 4-1/2 in, For Securing a Wide Variety of Doors, Cabinets, Boxes and Trunks
HASP SAFETY GALV 2-1/2IN      National Hardware 286BC Extra Heavy Flush/Full Inset T Hinge HASP SAFETY GLV 4-1/2INX1-1/2
T HINGES 8IN ZN PLT
Our Price: $7.98
Designed to secure a wide variety of doors, cabinets, boxes, trunks, etc. For security, all screws are concealed when hasp is closed. Ribbed design for extra strength. Includes rigid non-swivel staple. Visual-pack. National Hardware T Hinge, Extra Heavy, Flush/Full Inset, Series: 286BC, 0.105 in Leaf Thickness, 8 in Door Leaf Length, 2.73 in Door Leaf Width, 5-1/2 in Frame Leaf Length, 2.3 in Frame Leaf Width, 0.388 in Diameter Pin, Wall Mounting, Fasteners: NO 12 Flat Head Screw, Hot Rolled Steel, Zinc Plated, BHMA A138.18, For Residential Applications For both indoor and outdoor use. Rust resistant.
T-HINGE STL FIXPIN HD 4IN BLK National Hardware V284 Flush/Full Inset Light T Hinge National Hardware V30 Non-Swivel Safety Hasp
T HINGES 5IN ZN PLT
Our Price: $8.12
National Hardware Light T Hinge, Flush/Full Inset, Series: V284, 6 Holes, 0.27 in Hole Diameter, 0.071 in Leaf Thickness, 5 in Door Leaf Length, 0.89 in Frame Leaf Length, 2.88 in Frame Leaf Width, 0.19 in Diameter Pin, Aluminum Pin, Wall Mounting, Fasteners: NO 9 Flat Head Screw, 8 lb Load Capacity, 2.98 in Overall Width, Hot Rolled Steel National Hardware Safety Hasp, Non-Swivel, Series: V30, 0.44 in Diameter X 0.9 in Height Shackle, 4.56 in Length, 1-1/2 in Height, Hot Rolled Steel, Stainless Steel Pin, Galvanized, Includes: Rigid Non-Swivel Staple, BHMA A138.18 Certified, 3-1/4 in, For Securing a Wide Variety of Doors, Cabinets, Boxes and Trunks
National Hardware V32 Corrosion Resistant Swivel Staple Safety Hasp National Hardware V30 Non-Swivel Safety Hasp HASP SAFETY KYD 3-1/2 CHROME
National Hardware Swivel Staple Safety Hasp, Corrosion Resistant, Series: V32, 0.41 in Diameter Shackle, 4.48 in Length, 1-1/2 in Height, Hot Rolled Steel, Black, Includes: Fasteners, For Doors, Cabinets, Boxes and Trunks National Hardware Safety Hasp, Non-Swivel, Series: V30, 0.44 in Diameter X 0.9 in Height Shackle, 5.68 in Length, 1-1/2 in Height, Hot Rolled Steel, Stainless Steel Pin, Galvanized, Includes: Rigid Non-Swivel Staple, BHMA A138.18 Certified, 4-1/2 in, For Securing a Wide Variety of Doors, Cabinets, Boxes and Trunks Locks with a key for added security. Includes 2 keys. No padlock required.
National Hardware V37 Weather Resistant Safety Hasp Stanley N129-338 Extra T-Hinge National Hardware V32 Corrosion Resistant Swivel Staple Safety Hasp
SAFETY HASPS 3-1/4IN SS
Our Price: $8.41
T HINGES 4IN GALV
Our Price: $8.44
National Hardware Safety Hasp, Weather Resistant, Series: V37, 9/32 in Diameter Shackle, 3-1/4 in Length, Stainless Steel, BHMA A138.18 Certified, For Boxes, Chests and Cabinets Offset screw holes for extra strength and to prevent wood from splitting. Tight pin for left or right hand applications. Manufactured with hot-rolled steel. National Hardware Swivel Staple Safety Hasp, Corrosion Resistant, Series: V32, 0.41 in Diameter Shackle, 5.61 in Length, 1-1/2 in Height, Hot Rolled Steel, Black, Includes: Fasteners, For Doors, Cabinets, Boxes and Trunks
National Hardware V34 Double Hinge Safety Hasp National Hardware V827 Keyed Hasp Lock National Hardware VKA827 Keyed Hasp Lock
National Hardware Safety Hasp, Double Hinge, Series: V34, 8.19 in Length, 1-1/2 in Height, Cold Rolled Steel, Aluminum Pin, Zinc Plated, Includes: Rigid Non-Swivel Staple, BHMA A138.18 Certified, 4-1/2 in, For Around the Corner Applications on Lockers, Chests, Tool Boxes and Doors National Hardware Hasp Lock, Keyed, Series: V827, 1.61 in Length X 1.61 in Width X 1.16 in Height Shackle, 6 in Length, 1.6 in Height, Die Cast Zinc, Chrome Plated, 4-1/2 in, For Securing a Wide Variety of Doors, Cabinets, Boxes and Trunks National Hardware Hasp Lock, Keyed, Series: VKA827, 4-1/2 in Length, Steel, Chrome Plated, 4-1/2 in, For Securing a Wide Variety of Doors, Cabinets, Boxes and Trunks
T-HINGE ZINC PLATED 4IN       National Hardware V284 Flush/Full Inset Light T Hinge T-HINGE GALV 3IN
T HINGES 4IN ZN PLT
Our Price: $8.66
T HINGES 6IN ZN PLT
Our Price: $8.86
T HINGES 3IN GALV
Our Price: $9.14
Offset screw holes for extra strength and to prevent wood from splitting. Tight pin for left or right hand applications. Visual-pack. National Hardware Light T Hinge, Flush/Full Inset, Series: V284, 6 Holes, 0.27 in Hole Diameter, 0.072 in Leaf Thickness, 6 in Door Leaf Length, 0.89 in Frame Leaf Length, 3.16 in Frame Leaf Width, 0.195 in Diameter Pin, Aluminum Pin, Wall Mounting, Fasteners: NO 9 Flat Head Screw, 13 lb Load Capacity, 3.26 in Overall Width, Hot Rolled Steel Offset screw holes for extra strength and to prevent wood from splitting. Tight pin for left or right hand applications. Steel with aluminum pin. Safe working load: 18 lbs. Visual-pack.
National Hardware V32 Swivel Staple Safety Hasp Stanley 221960 Hook and Eye Turnbuckle Master Lock 720DPF Single Hinge Latching Hasp
SAFETY HASPS 6IN ZN PLT
Our Price: $9.18
National Hardware Safety Hasp, Swivel Staple, Series: V32, 0.41 in Diameter X 1.2 in Height Shackle, 8.62 in Length, 1-3/4 in Height, Hot Rolled Steel, Aluminum Pin, Zinc Plated, BHMA A138.18 Certified, 6 in, For Securing a Wide Variety of Doors, Cabinets, Boxes and Trunks Designed for tightening or drawing together various lines and cables. Ideal for marine and other outdoor applications. Strong, rust resistant body with steel eye and hook bolts. Clear coated aluminum body. Designed to fit most corners and angles to secure hard-to-lock properly. Recommended for use with Master Lock medium and high security padlocks. Heavy gauge hardened steel protects against cutting and sawing. Hardened Boron alloy staple withstands up to 8 tons of cutting force. Rolled edges protect against prying and conceal mounting screws. Hinge pins are hidden and are virtually impossible to remove. Accepts shackle diameters up to 7/16".
T-HINGE GALV 5IN              HASP SAFETY ZN STL 6X1-3/4IN  HASP SAFETY KYD 4-1/2 CHROME
T HINGES 5IN GALV
Our Price: $9.44
National Hardware T-Hinge, Series: V286, Extra Heavy Duty, Tight Pin, 70 lb Load Capacity, 5 in Overall Length, Hot Rolled Steel, Galvanized, Standards: BHMA A138.18 Screws are concealed when hasp is locked. Rust resistant. Zinc plated. Adjustable staple. Locks with a key for added security. Includes 2 keys. No padlock required.
T-HINGE FXPIN H-DUTY 4IN GALV Prime Line U 9951 Keyed Hasp HASP SAFETY GALV STL 6 INCH
Steel hasp hinges over die-cast locking mechanism. Twist keyed knob to lock and use key to unlock. Hasp cover screws when in locked position. Includes 1 hasp, 1 locking mechanism, 2 keys and 1 set of installation screws. Prefix U on factory number denotes new Defender Security packaging. Non- swiveling. Adds security for doors, cabinets and gates. Rust resistant.
T-HINGE GALV 4IN              T-HINGE STL FXPIN LD 6 IN GALV Stanley 221978 Hook and Eye Turnbuckle
T HINGES 4IN GALV
Our Price: $10.02
Offset screw holes for extra strength and to prevent wood from splitting. Tight pin for left or right hand applications. Steel with aluminum pin. Safe working load: 18 lbs. Visual-pack. Used for interior or exterior applications. Rust-resistant. Designed for tightening or drawing together various lines and cables. Ideal for marine and other outdoor applications. Strong, rust resistant body with steel eye and hook bolts. Clear coated aluminum body.
National Hardware V37 Weather Resistant Safety Hasp National Hardware V285 Extra Heavy Flush/Full Inset T Hinge HASP SAFETY GALV 3-1/4IN
SAFETY HASPS 4-1/2IN SS
Our Price: $10.10
SAFETY HASPS 3-1/4IN GALV
Our Price: $10.32
National Hardware Safety Hasp, Weather Resistant, Series: V37, 9/32 in Diameter Shackle, 4-1/2 in Length, Stainless Steel, BHMA A138.18 Certified, For Boxes, Chests and Cabinets National Hardware T Hinge, Extra Heavy, Flush/Full Inset, Series: V285, 6 Holes, 4 in Door Leaf Length, Fixed Pin, Wall Mounting, Stainless Steel, Stainless Steel, BHMA A138.18, For Commercial/Industrial and Residential Applications Stanley Swivel Staple Safety Hasp, Series: V32, 1 Locking Holes, 3-1/4 in Length, 1-1/2 in Width, Steel, Galvanized, For Securing a Wide Variety of Doors, Cabinets, Boxes and Trunks
National Hardware V30 Non-Swivel Safety Hasp National Hardware V286 Extra Heavy Flush/Full Inset T Hinge National Hardware V32 Swivel Staple Safety Hasp
SAFETY HASPS 6IN GALV
Our Price: $10.32
T HINGES 4IN BLK
Our Price: $10.68
SAFETY HASPS 4-1/2IN GALV
Our Price: $10.68
National Hardware Safety Hasp, Non-Swivel, Series: V30, 8.68 in Length, 1-3/4 in Height, Hot Rolled Steel, Galvanized, Includes: Rigid Non-Swivel Staple, BHMA A138.18 Certified, 6 in, For Securing a Wide Variety of Doors, Cabinets, Boxes and Trunks National Hardware T Hinge, Extra Heavy, Flush/Full Inset, Series: V286, 6 Holes, 0.076 in Leaf Thickness, 4 in Door Leaf Length, 1.55 in Door Leaf Width, 1.32 in Frame Leaf Length, 3.3 in Frame Leaf Width, 0.222 in Diameter Pin, Wall Mounting, Fasteners: NO 9 Flat Head Screw, Hot Rolled Steel, Black, BHMA A138.18, For Residential Applications National Hardware Safety Hasp, Swivel Staple, Series: V32, 0.41 in Diameter X 1.2 in Height Shackle, 5.61 in Length, 1-1/2 in Height, Hot Rolled Steel, Brass Pin, Galvanized, BHMA A138.18 Certified, 4-1/2 in, For Securing a Wide Variety of Doors, Cabinets, Boxes and Trunks
National Hardware 286BC Extra Heavy Flush/Full Inset T Hinge Mintcraft LTH-Z02-013L Light Duty T-Hinge American Lock A885D Double Hinge Locking Hasp
T HINGES 10IN ZN PLT
Our Price: $11.38
National Hardware T Hinge, Extra Heavy, Flush/Full Inset, Series: 286BC, 0.36 in Hole Diameter, 0.14 in Leaf Thickness, 10 in Door Leaf Length, 7.2 in Frame Leaf Length, 2-1/4 in Frame Leaf Width, 0.44 in Diameter Pin, Wall Mounting, 48 lb Load Capacity, 12-1/4 in Overall Length, Hot Rolled Steel, Zinc Plated, BHMA A138.18 Used for interior or exterior applications. Rust-resistant. Zinc plated. Resists cutting, sawing, and hammering. Ideal for corners and angles. Mounting hardware included. Accepts shackle diameter up to 7/16".
Master Lock 706D High Security Hasp Stanley N129-445 Extra T-Hinge Master Lock 730DPF Straight Bar Safety Hasp
T HINGES 6IN GALV
Our Price: $11.64
High security pinless hinge. Offset screw holes for extra strength and to prevent wood from splitting. Tight pin for left or right hand applications. Manufactured with hot-rolled steel. Zinc plated hardened steel for added strength and weatherability. Hardened steel staple resists cutting, sawing and hammering. Hasp body conceals mounting hardware. Use for securing utility vans, trailers, gang boxes, and vending machines.  Accepts shackle diameter up to 7/16".
T-HINGE STL FIXPIN HD 6IN BLK SPRING HINGE STN NKL 3-1/2IN  SPRING HINGE ORB 3-1/2IN
SPRING HINGES 3-1/2IN ORB
Our Price: $12.28
National Hardware Spring Hinge, Series: V521, Adjustable, Suitable For Use With: Standard Hinge Cutout and Fire Doors, 30 lb Load Capacity, 3-1/2 in Overall Length, Cold Rolled Steel, Satin Nickel Plated, Standards: UL Listed, 5/8 in Radius Round Corner National Hardware Spring Hinge, Series: V521, Adjustable, Suitable For Use With: Standard Hinge Cutout and Fire Doors, 30 lb Load Capacity, 3-1/2 in Overall Length, Cold Rolled Steel, Oil Rubbed Bronze, Standards: UL Listed, 5/8 in Radius Round Corner
SPRING HINGE STN NKL 3-1/2IN  SPRING HINGE ORB 3-1/2IN      SPRING HINGE STN NKL 3-1/2IN
SPRING HINGES 3-1/2IN ORB
Our Price: $12.28
National Hardware Spring Hinge, Series: V520, Square Corner, Suitable For Use With: Standard Hinge Cutout and Fire Doors, 30 lb Load Capacity, 3-1/2 in Overall Length, 3-1/2 in Overall Width, Cold Rolled Steel, Satin Nickel Plated, Standards: UL Listed National Hardware Spring Hinge, Series: V520, Square Corner, Suitable For Use With: Standard Hinge Cutout and Fire Doors, 30 lb Load Capacity, 3-1/2 in Overall Length, 3-1/2 in Overall Width, Cold Rolled Steel, Oil Rubbed Bronze, Standards: UL Listed National Hardware Spring Hinge, Series: V521, Adjustable, Suitable For Use With: Standard Hinge Cutout and Fire Doors, 30 lb Load Capacity, 3-1/2 in Overall Length, Cold Rolled Steel, Satin Nickel Plated, Standards: UL Listed, 1/4 in Radius Round Corner
SPRING HINGE ORB 3-1/2IN      American Lock A850D Locking Hasp T-HINGE GALVINIZED 5IN
SPRING HINGES 3-1/2IN ORB
Our Price: $12.28
T HINGES 5IN GALV
Our Price: $12.58
National Hardware Spring Hinge, Series: V521, Adjustable, Suitable For Use With: Standard Hinge Cutout and Fire Doors, 30 lb Load Capacity, 3-1/2 in Overall Length, Cold Rolled Steel, Oil Rubbed Bronze, Standards: UL Listed, 1/4 in Radius Round Corner Hardened steel staple resists cutting, sawing, and hammering. Zinc plated hardened steel for added strength and weatherability. Mounting hardware included for installation. Applications: trailers, van doors, garages, sheds, barns, storage buildings, vending machines, utility rooms, and warehouse doors. Accepts shackle diameter up to 7/16". National Hardware T-Hinge, Series: V284, Lightweight, Tight Pin, Brass Pin, 13 lb Load Capacity, 5 in Overall Length, Hot Rolled Steel, Galvanized, Standards: BHMA A138.18
Master Lock 722D Double Hinge High Security Hasp T-HINGE ZINC PLATED 5IN       Closetmaid 7556 U Clip
T HINGES 5IN ZN PLT
Our Price: $12.90
Designed to fit most corners and angles to secure hard-to-lock property. Recommended for use with Master Lock medium and high security padlocks. Heavy gauge hardened steel protects against cutting and sawing. Hardened Boron alloy staple withstands up to 8 tons of cutting force. Rolled edges protect against prying and conceal mounting screws. Hinge pins are hidden and are virtually impossible to remove. Accepts shackle diameters up to 7/16". Offset screw holes for extra strength and to prevent wood from splitting. Tight pin for left or right hand applications. Visual-pack. Attaches to the back of shelving to anchor shelf to back wall. Shelf clip "locks" shelving into place - attaching it at the top and bottom of shelf wire with or instead of wall clips. For concrete/stud and drywall installation. Material: Metal.
T-HINGE EX-HD W/BSHNG 4IN SS  SPRING HINGE STN NKL 4IN      SPRING HINGE ORB 4IN
SPRING HINGES 4IN ORB
Our Price: $13.36
National Hardware Spring Hinge, Series: V520, Adjustable, Square Corner, Suitable For Use With: Standard Hinge Cutout and Fire Doors, 37 lb Load Capacity, 4 in Overall Length, 4 in Overall Width, Cold Rolled Steel, Satin Nickel Plated, Standards: UL Listed National Hardware Spring Hinge, Series: V520, Adjustable, Square Corner, Suitable For Use With: Standard Hinge Cutout and Fire Doors, 37 lb Load Capacity, 4 in Overall Length, 4 in Overall Width, Cold Rolled Steel, Oil Rubbed Bronze, Standards: UL Listed
SPRING HINGE STN NKL 4IN      SPRING HINGE ORB 4IN          T-HINGE ZINC PLATED 6IN
SPRING HINGES 4IN ORB
Our Price: $13.36
T HINGES 6IN ZN PLT
Our Price: $13.36
Manufactured with cold-rolled steel. Closing speed is adjustable. Fits standard hinge cutout. Tension is adjustable. Hinge is UL approved for fire doors. Safe working load: 37 lbs. Visual-pack. Manufactured with cold-rolled steel. Closing speed is adjustable. Fits standard hinge cutout. Tension is adjustable. Hinge is UL approved for fire doors. Safe working load: 37 lbs. Visual-pack. Offset screw holes for extra strength and to prevent wood from splitting. Tight pin for left or right hand applications. Visual-pack.
SPRING HINGE STN NKL 4IN      SPRING HINGE ORB 4IN          Mintcraft LTH-Z03-013L Light Duty T-Hinge
SPRING HINGES 4IN ORB
Our Price: $13.36
National Hardware Spring Hinge, Series: V521, Adjustable, Suitable For Use With: Standard Hinge Cutout and Fire Doors, 37 lb Load Capacity, 4 in Overall Length, Cold Rolled Steel, Satin Nickel Plated, Standards: UL Listed, 1/4 in Radius Round Corner National Hardware Spring Hinge, Series: V521, Adjustable, Suitable For Use With: Standard Hinge Cutout and Fire Doors, 37 lb Load Capacity, 4 in Overall Length, Cold Rolled Steel, Oil Rubbed Bronze, Standards: UL Listed, 1/4 in Radius Round Corner Used for interior or exterior applications. Rust-resistant.
National Hardware V39 Weather Resistant Swivel Staple Safety Hasp Closetmaid 21782 Shelf End Wall Bracket Closetmaid 1770 Back Wall Clip
SAFETY HASPS 3-1/4IN SS
Our Price: $14.58
National Hardware Swivel Staple Safety Hasp, Weather Resistant, Series: V39, 3-1/4 in Length, Stainless Steel, BHMA A138.18 Certified, For Doors, Cabinets, Boxes and Trunks Heavy duty preloaded bracket with anchor easily mounts to the wall and holds the end of any size ClosetMaid shelf. Provides side wall support. Supports front lip of shelving where it meets the side wall. For drywall installations. Includes: 2.875"H x 2.125"W x 1.75"D. Material: Resin. Anchors shelf to wall. Ensures stability of shelf.
Mintcraft LTH-Z04-013L Light Duty T-Hinge SuperSlide 1741 Wall Bracket National Hardware V39 Weather Resistant Swivel Staple Safety Hasp
SAFETY HASPS 4-1/2IN SS
Our Price: $15.66
Used for interior or exterior applications. Rust-resistant. Supports low profile SuperSlide shelving in a wall to wall installation. Includes: 2 wall brackets, 4 pins and 4 anchors. Use in conjunction with support brackets and wall clips for installing wire shelving. Suports front lip of shelving where it meets the side wall. 2"H x 2.19W x 1.75"D. Material: Resin National Hardware Swivel Staple Safety Hasp, Weather Resistant, Series: V39, 4-1/2 in Length, Stainless Steel, BHMA A138.18 Certified, For Doors, Cabinets, Boxes and Trunks
National Hardware V33 Extra Heavy Hinge Hasp Stanley 399720 Padlock/Hasp Combination HINGE HASP HD ZN STL 4X1-3/4IN
National Hardware Hinge Hasp, Extra Heavy, Series: V33, 7.19 in Length, 1.88 in Height, Steel, Zinc Plated, Includes: Case Hardened Staple, BHMA A138.18 Certified, 7-1/4 in Use to help secure cabinets, sheds and store rooms. Corrugated leaf offers greater strength than conventional flat-leaf hasps. Rotating post discourages forced entry. Hardened steel shackle resists cutting and sawing. Zinc plating resists rust. Use to secure chests, cabinets, lockers and door corners. Rust resistant.
National Hardware V285 Extra Heavy Flush/Full Inset T Hinge National Hardware V286 Extra Heavy Flush/Full Inset T Hinge SPRING HINGE SS 3-1/2IN
T HINGES 6IN BLK
Our Price: $16.06
SPRING HINGES 3-1/2IN SS
Our Price: $16.24
National Hardware T Hinge, Extra Heavy, Flush/Full Inset, Series: V285, 8 Holes, 6 in Door Leaf Length, Fixed Pin, Wall Mounting, Stainless Steel, Stainless Steel, BHMA A138.18, For Commercial/Industrial and Residential Applications National Hardware T Hinge, Extra Heavy, Flush/Full Inset, Series: V286, 8 Holes, 0.095 in Leaf Thickness, 6 in Door Leaf Length, 2.15 in Door Leaf Width, 1.83 in Frame Leaf Length, 3-3/4 in Frame Leaf Width, 0.326 in Diameter Pin, Wall Mounting, Fasteners: NO 12 Flat Head Screw, 23 lb Load Capacity, Hot Rolled Steel, Black, BHMA A138.18 Closing speed is adjustable. Fits standard hinge cutout. Tension is adjustable. Square corners. Hinge is UL approved for fire doors. Safe working load: 30 lbs.  Visual-pack.
National Hardware V5203 Flush/Full Inset Spring Hinge National Hardware V521 Flush/Full Inset Round Corner Spring Hinge SPRING HINGE SS 4IN
SPRING HINGES 3-1/2IN BRS
Our Price: $16.50
SPRING HINGES 3-1/2IN BRS
Our Price: $16.50
SPRING HINGES 4IN SS
Our Price: $16.77
National Hardware Spring Hinge, Flush/Full Inset, Series: V5203, 6 Holes, Removable Pin, Wall Mounting, 30 lb Load Capacity, 3-1/2 in Overall Width, Cold Rolled Steel, Brass, UL Listed, For Industrial and Residential Applications National Hardware Spring Hinge, Flush/Full Inset, Round Corner, Series: V521, 6 Holes, Wall Mounting, 30 lb Load Capacity, 3-1/2 in Overall Width, Cold Rolled Steel, Brass, UL Listed, For Industrial and Residential Applications Closing speed is adjustable. Fits standard hinge cutout. Tension is adjustable. Square corners. Hinge is UL approved for fire doors. Safe working load: 30 lbs.  Visual-pack.
T-HINGE FXPIN H-DUTY 6IN GALV T-HINGE GALV 8IN              SPRING HINGE STN BRASS 3IN
T HINGES 8IN GALV
Our Price: $17.23
Offset screw holes for extra strength and to prevent wood from splitting. Tight pin for left or right hand applications. Manufactured with hot-rolled steel. National Hardware Spring Hinge, Series: V127, Double Acting, Suitable For Use With: 3/4 - 1-3/8 in Thick Swinging Doors, Adjustable, Tight Pin, Surface Mounting, 12 lb Load Capacity, 3 in Overall Length, Cold Rolled Steel, Satin Brass, Includes: Screws, For Swinging Doors
SPRING HINGE STN NKL 3IN      SPRING HINGE ORB 3IN          HINGE SPG ADJ SC 4-1/2X4-1/2IN
SPRING HINGES 3IN ORB
Our Price: $18.07
National Hardware Spring Hinge, Series: V127, Double Acting, Suitable For Use With: 3/4 - 1-3/8 in Thick Swinging Doors, Adjustable, Tight Pin, Surface Mounting, 12 lb Load Capacity, 3 in Overall Length, Cold Rolled Steel, Satin Nickel Plated, Includes: Screws, For Swinging Doors National Hardware Spring Hinge, Series: V127, Double Acting, Suitable For Use With: 3/4 - 1-3/8 in Thick Swinging Doors, Adjustable, Tight Pin, Surface Mounting, 12 lb Load Capacity, 3 in Overall Length, Cold Rolled Steel, Oil Rubbed Bronze, Includes: Screws, For Swinging Doors Ideal for use in corridors, entrances and stairways. Automatically closes door - an alternative to overhead mounted door closers. Patented ratchet adjustment eliminates need for adjustment locking pin. Meets NFPA8 standard for 3 hour fire rated doors - minimum 2 spring hinges per door required. UL listed for doors up to 4' x 8' weighing up to 180 lbs. Conforms to ANSI/BHMA standard A156.17, Grade 1.
HINGE SPG ADJ PC 4-1/2X4-1/2IN T-HINGE EX-HD W/BSHNG 5IN SS  CART LAUNDRY 3-TIER WHITE
Ideal for use in corridors, entrances and stairways. Automatically closes door - an alternative to overhead mounted door closers. Patented ratchet adjustment eliminates need for adjustment locking pin. Meets NFPA8 standard for 3 hour fire rated doors - minimum 2 spring hinges per door required. UL listed for doors up to 4' x 8' weighing up to 180 lbs. Conforms to ANSI/BHMA standard A156.17, Grade 1. For any room. Slim design fits in the smallest spaces. Easy to assemble and takes up minimal floor space. Basket style shelves are large enough to accommodate full size detergent bottles. Dimensions: 23.23 in L x 7.87 in W x 31.3 in. PE coating white.
National Hardware N184-572 Flush/Full Inset Spring Hinge National Hardware N185-207 Flush/Full Inset Round Corner Spring Hinge T-HINGE ZINC PLATED 8IN
SPRING HINGES 4IN BRS
Our Price: $18.67
SPRING HINGES 4IN BRS
Our Price: $18.67
T HINGES 8IN ZN PLT
Our Price: $19.14
National Hardware Spring Hinge, Flush/Full Inset, Series: V520, 8 Holes, Removable Pin, Wall Mounting, 37 lb Load Capacity, 4 in Overall Width, Cold Rolled Steel, Brass, UL Listed, For Industrial and Residential Applications National Hardware Spring Hinge, Flush/Full Inset, Round Corner, Series: V521, 8 Holes, Wall Mounting, 37 lb Load Capacity, 4 in Overall Width, Cold Rolled Steel, Brass, UL Listed, For Industrial and Residential Applications Offset screw holes for extra strength and to prevent wood from splitting. Tight pin for left or right hand applications. Visual-pack.
Closetmaid 1009 Shelf Support Pole T-HINGE STL FIXPIN HD 8IN BLK National Hardware V30 Non-Swivel Safety Hasp
SAFETY HASPS 7IN ZN PLT
Our Price: $20.38
Use in place of support brackets when stacking 2 or more shelves. Pre-drilled holes for easy shelf location. Includes: 2 pole pieces (43 in. each) 1 pole joiner, 2 pole caps, and hardware. Material: Epoxy coated steel. National Hardware Safety Hasp, Non-Swivel, Series: V30, 0.85 in Diameter X 1.43 in Height Shackle, 9.81 in Length, 2-1/2 in Height, Hot Rolled Steel, Zinc Plated, Includes: Rigid Non-Swivel Staple, BHMA A138.18 Certified, 7 in, For Securing a Wide Variety of Doors, Cabinets, Boxes and Trunks
National Hardware V31 Rust Resistant Safety Hasp National Hardware V286 Extra Heavy Flush/Full Inset T Hinge HASP SAFETY GALV 7-1/4IN
SAFETY HASPS 7-1/2IN SS
Our Price: $21.33
T HINGES 8IN BLK
Our Price: $21.74
SAFETY HASPS 7-1/4IN GALV
Our Price: $22.32
National Hardware Safety Hasp, Heavy Duty, Rust Resistant, Series: V31, 7-1/2 in Length, Stainless Steel, Gray, Includes: Fasteners, BHMA A138.18 Certified, For Doors, Chests and Lockers National Hardware T Hinge, Extra Heavy, Flush/Full Inset, Series: V286, 9 Holes, 0.105 in Leaf Thickness, 8 in Door Leaf Length, 2.73 in Door Leaf Width, 2.3 in Frame Leaf Length, 4-1/4 in Frame Leaf Width, 0.388 in Diameter Pin, Wall Mounting, Fasteners: NO 12 Flat Head Screw, 35 lb Load Capacity, Hot Rolled Steel, Black, BHMA A138.18 Stanley Swivel Safety Hasp, Series: V33, Extra Heavy Duty, 1 Locking Holes, 7-1/4 in Length, Steel, Galvanized, For Storage Sheds, Warehouse Doors, Cabins and Trailers
National Hardware 286BC Extra Heavy Flush/Full Inset T Hinge National Hardware V285 Extra Heavy Flush/Full Inset T Hinge T-HINGE EX-HD W/BSHNG 6IN SS
T HINGES 12IN ZN PLT
Our Price: $23.33
National Hardware T Hinge, Extra Heavy, Flush/Full Inset, Series: 286BC, 0.4 in Hole Diameter, 0.16 in Leaf Thickness, 12 in Door Leaf Length, 8 in Frame Leaf Length, 3.15 in Frame Leaf Width, 0.485 in Diameter Pin, Wall Mounting, Fasteners: NO 16 Screw, 23 lb Load Capacity, 14-3/4 in Overall Length, Hot Rolled Steel, Zinc Plated, BHMA A138.18 National Hardware T Hinge, Extra Heavy, Flush/Full Inset, Series: V285, 8 Holes, 8 in Door Leaf Length, Fixed Pin, Wall Mounting, Stainless Steel, Stainless Steel, BHMA A138.18, For Commercial/Industrial and Residential Applications
HINGE SPRING SATIN BRS STL 3IN Mintcraft LTH-Z06-013L Light Duty T-Hinge Mintcraft HTH-Z04-013L T-Hinge
Allows hinge doors to swing in both directions. Fully adjustable. Includes adjusting rod, stop pin, screws and instruction manual. Used for interior or exterior applications. Rust-resistant. Use on doors, gates, sheds and toolboxes. Eliminates metal to metal contact. Rust resistant.
T-HINGE FXPIN H-DUTY 8IN GALV Closetmaid 1061 Shelf Kit ShelfTrack 21775 Shelf Bracket
Prepack shelving with all hardware needed for installation included. Provides extra storage space for any room. Preloaded with #8 pin drive and anchors. No.6606, 71925 and No. 21775. - For Organizer, Wardrobe, SuperSlide and Close Mesh Shelves 12" in depth; and Wardrobe or hanging SuperSlide shelves 16" in depth. No. 26607, 71924, and No.21776 - For Organizer, SuperSlide (in storage application), and Close Mesh shelves 16" in depth. No.26605 - For Organizer, Wardrobe, SuperSlide and Close Mesh Shelves 20" in depth.
Mintcraft HTH-Z05-013L T-Hinge UNIT 4-SHLF GRAY SHELVES/LEGS ShelfTrack 21776 Shelf Bracket
Use on doors, gates, sheds and toolboxes. Eliminates metal to metal contact. Rust resistant. Durable polypropylene solid-surface and rugged tubular construction. Assemble without tools. Preloaded with #8 pin drive and anchors. No.6606, 71925 and No. 21775. - For Organizer, Wardrobe, SuperSlide and Close Mesh Shelves 12" in depth; and Wardrobe or hanging SuperSlide shelves 16" in depth. No. 26607, 71924, and No.21776 - For Organizer, SuperSlide (in storage application), and Close Mesh shelves 16" in depth. No.26605 - For Organizer, Wardrobe, SuperSlide and Close Mesh Shelves 20" in depth.
Mintcraft HTH-Z08-013L T-Hinge National Hardware V127 Double Acting Spring Hinge Closetmaid 1611 Rolling Cart
SPRING HINGES 3IN BRS
Our Price: $37.44
Use on doors, gates, sheds and toolboxes. Eliminates metal to metal contact. Rust resistant. National Hardware Spring Hinge, Double Acting, Series: V127, Suitable For Use With: 3/4 - 1-1/4 in Thickness Doors, 0.056 in Leaf Thickness, Removable Pin, Surface, Wall Mounting, Fasteners: Screws, Cold Rolled Steel, Brass, For Commercial/Industrial and Residential Applications Offers 4 fixed basket/shelves. Casters included. Perfect for office, laundry, kitchen, bath or anywhere. All hardware included. 34.62?H x 16.75?W x 12.37?D. Material: Epoxy coated steel.
Closetmaid 1640 Closet Organizer Homebasix SS-120-02-CH 2-Tier Shelf Stacker UNIT 5-SHLF GRAY SHELVES/LEGS
Up to 5 feet closet organizer kit with all hardware included. Sturdy steel construction. Size: 5' hanging space and 7' shelf space. Adjustable shelves and leveling feet. Easy snap together assembly. Size: 23"H x 23"W x 13"D. Durable polypropylene solid-surface and rugged tubular construction. Assemble without tools. Gray color.
Closetmaid 1021 Linen Shelf Kit Closetmaid 1628 Closet Organizer Kit Homebasix G003-CH Storage Cart
Prepack shelving with all hardware needed for installation included. Provides extra storage space for any room. 5' to 8' closet organizer kit with all hardware included. Sturdy steel construction. 10-1/2' hanging space and 11' of shelf space. Rolling  cart with 3 white plastic drawers and mirror polished chrome frame. Size: 25-5/8" x 13" x 15-3/8".
Mintcraft HTH-Z06-013L T-Hinge Mintcraft HTH-Z10-013L T-Hinge Homebasix G006-CH Storage Cart
Use on doors, gates, sheds and toolboxes. Eliminates metal to metal contact. Rust resistant. Use on doors, gates, sheds and toolboxes. Eliminates metal to metal contact. Rust resistant. Rolling cart with 6 colorful plastic drawers and mirror polished chrome frame. Size: 26" x 13" x 15-3/8".
Closetmaid 1031 Shelf Kit Homebasix G005-CH Storage Cart Homebasix SS-JR0404-WH 4-Tier Shelf Stacker
Prepack shelving with all hardware needed for installation included. Provides extra storage space for any room. Rolling cart with 5 white plastic drawers and mirror polished chrome frame. Size: 38-1/4" x 13" x 15-3/8". Adjustable shelves and leveling feet. Easy snap together assembly. Size: 48-1/4"H x 31"W x 13"D .
Closetmaid 1041 Shelf Kit Mintcraft HTH-Z12-013L T-Hinge Closetmaid 1608 Deluxe Closet Organizer Kit
Prepack shelving with all hardware needed for installation included. Provides extra storage space for any room. Use on doors, gates, sheds and toolboxes. Eliminates metal to metal contact. Rust resistant. 5' to 8' closet organizer kit with all hardware included. Sturdy steel construction. 10-1/2' hanging space and 13-1/2' shelf space.
SuperSlide 5636 Closet Organizer Kit Closetmaid 6201 Drawer Kit 2060R HINGE ADJUST SPRG 4.5IN
Utilizes "SuperSlide" shelving to provide a continuous hanger slide. For 5' to 8' closets. All hardware included. Sturdy steel construction. Size: 9' hanging space and 12' shelf space. Kit includes 4 baskets - a 4 in. deep and three 7 in. deep baskets, 7-runner frame set and crossbars. Tops, casters, and other accessories sold separately. Smooth gliding action. All hardware included. 29.318?H x 17.8?W x 21.019?D. Material: Epoxy coated steel. Ideal for use in corridors, entrances and stairways. Automatically closes door - an alternative to overhead mounted door closers. Patented ratchet adjustment eliminates need for adjustment locking pin. Meets NFPA8 standard for 3 hour fire rated doors - minimum 2 spring hinges per door required. UL listed for doors up to 4' x 8' weighing up to 180 lbs. Conforms to ANSI/BHMA standard A156.17, Grade 1.
Closetmaid 1103 Support Bracket Closetmaid 1164XBJ Support Bracket Closetmaid 1166 Support Bracket
No. 103: Use with 10", 12" and 16" Shelf & Rod, and 12" Linen. No. 106: For Linen shelves 16" in depth.  Bulk pack. Closetmaid Support Bracket, 12 in Length, 2 in Width, 2 in Depth, Steel, Epoxy Coated, White, Suitable For Use With: Wire Shelving, Includes: (2) Brackets, (2) Anchors, (2) NO 8 Pins Closetmaid Support Bracket, 16 in Length, 2 in Width, 2 in Depth, Steel, Epoxy Coated, White, Suitable For Use With: Wire Shelving,
Closetmaid 932 Pre-Loaded End Bracket
Secures shelf to side wall of closet. Pre-loaded with pins and anchors, no screws needed. Accommodates pole clips and shelf stops in "TotalSlide" system.
   
 
1