Home > HARDWARE > BUILDERS HARDWARE > HINGES > STRAP HINGES
Sort By:
1
Closetmaid 01016 End Cap SuperSlide 5629 Closet Rod Support HINGE STRAP ZINC PLATED 3IN
STRAP HINGES 3IN ZN PLT
Our Price: $1.95
Vinyl end cap provides protection from cut end of wire shelving that exposes possible rough edges. Large end caps cover the large rod, 0 gauge, .25"H x .4"W x .4"D. Small end caps are for the 4 gauge wire, .2"H x .2"W x .2"D. Designed to be used with ClosetMaid - Shelf & Rod shelving. SuperSlide shelving and hardware allows hangers to slide freely on both Fixed Mount and ShelfTrack mounting systems. Hangers slide without interruption. Snaps onto SuperSlide shelf to support hang rod. Use one every 36 in. of hang rod and at each end of shelf and hang rod. 5.75"H x 0.87"W x 3.87"D. Material: Resin Offset screw holes for extra strength and to prevent wood from splitting. Tight pin for left or right hand applications. Steel with aluminum pin. Safe working load: 18 lbs. Boxed loose.
HASP SAFETY ZINC PLT 2-1/2IN  BRACKET SUPPORT SHOE SHELF WHT HINGE STRAP STEEL LD 2IN ZINC
Non- swiveling. Adds security for doors, cabinets and gates. Rust resistant. For wire shelving, converts almost any wire shelf to a shoe shelf. Make a shoe shelf by inverting shelf, lip facing up. Holds shoes away from wall at an angle. Use 1 shoe support bracket every 24 in. Does not work with Close Mesh shelving. 6.125"H x 1.25"W x 4.75"D. Use in both the interior and exterior. Screws included.
HINGE STRAP ZINC PLATED 5IN   HASP SAFETY GALV 2-1/2IN      National Hardware V30 Non-Swivel Safety Hasp
STRAP HINGES 5IN ZN PLT
Our Price: $3.03
Offset screw holes for extra strength and to prevent wood from splitting. Tight pin for left or right hand applications. Steel with aluminum pin. Safe working load: 18 lbs. Boxed loose. Non- swiveling. Adds security for doors, cabinets and gates. Rust resistant. National Hardware Safety Hasp, Non-Swivel, Series: V30, 0.34 in Diameter X 0.62 in Height Shackle, 2.43 in Length, 3/4 in Height, Hot Rolled Steel, Zinc Plated, Includes: Rigid Non-Swivel Staple, BHMA A138.18 Certified, 1-3/4 in, For Securing a Wide Variety of Doors, Cabinets, Boxes and Trunks
HASP SAFETY 3IN ZN PLT STEEL  National Hardware V30 Non-Swivel Safety Hasp HINGE STRAP ZINC PLATED 6IN
STRAP HINGES 6IN ZN PLT
Our Price: $3.53
Use on doors, cabinets and gates with a 90 degree corner. Rust resistant. National Hardware Safety Hasp, Non-Swivel, Series: V30, 0.35 in Diameter X 0.7 in Height Shackle, 3.57 in Length, 1 in Height, Hot Rolled Steel, Zinc Plated, Includes: Rigid Non-Swivel Staple, BHMA A138.18 Certified, 2-1/2 in, For Securing a Wide Variety of Doors, Cabinets, Boxes and Trunks Offset screw holes for extra strength and to prevent wood from splitting. Tight pin for left or right hand applications. Steel with aluminum pin. Safe working load: 18 lbs. Boxed loose.
HASP SAFETY ADJ ZINC 3-1/2IN  HASP SAFETY ZINC STEEL 3-1/2IN National Hardware V30 Non-Swivel Safety Hasp
Screws are concealed when hasp is locked. Rust resistant. Zinc plated. Adjustable staple. Use on cabinets, doors and gates. Mounting screws are concealed when the hasp is closed. National Hardware Safety Hasp, Non-Swivel, Series: V30, 0.44 in Diameter X 0.9 in Height Shackle, 4.56 in Length, 1-1/2 in Height, Hot Rolled Steel, Zinc Plated, Includes: Rigid Non-Swivel Staple, BHMA A138.18 Certified, 3-1/4 in, For Securing a Wide Variety of Doors, Cabinets, Boxes and Trunks
HINGE STRAP STEEL LD 3IN ZINC National Hardware 282BC Flush/Full Inset Strap Hinge HASP SAFETY ZINC PLT 3-1/2IN
STRAP HINGES 4IN ZN PLT
Our Price: $3.95
Use in both the interior and exterior. Screws included. National Hardware Strap Hinge, Flush/Full Inset, Heavy Duty, Series: 282BC, 0.28 in Hole Diameter, 0.08 in Leaf Thickness, 4 in Door Leaf Length, 1.61 in Door Leaf Width, 4 in Frame Leaf Length, 1.61 in Frame Leaf Width, 0.22 in Diameter Pin, Wall Mounting, 60 lb Load Capacity, 8 in Overall Width, Hot Rolled Steel, Zinc Plated, BHMA A138.18 Non- swiveling. Adds security for doors, cabinets and gates. Rust resistant.
National Hardware V30 Non-Swivel Safety Hasp National Hardware V288 Hinge Hasp HASP SAFETY ZN STL 4-1/2IN
HINGE HASPS 3IN ZN PLT
Our Price: $4.04
National Hardware Safety Hasp, Non-Swivel, Series: V30, 0.35 in Diameter X 0.7 in Height Shackle, 3.57 in Length, 1 in Height, Hot Rolled Steel, Brass, Includes: Rigid Non-Swivel Staple, 2-1/2 in, For Securing a Wide Variety of Doors, Cabinets, Boxes and Trunks National Hardware Hinge Hasp, Series: V288, 3/4 in Height Shackle, 5-1/4 in Length, 1-5/32 in Height, Hot Rolled Steel, Aluminum Pin, Zinc Plated, BHMA A138.18 Certified, 3 in, For Regular or Around the Corner Applications Screws are concealed when hasp is locked. Rust resistant. Zinc plated. Adjustable staple.
Master Lock 702D High Security Hasp National Hardware V280 Flush/Full Inset Light Strap Hinge National Hardware 282BC Flush/Full Inset Strap Hinge
STRAP HINGES 2IN ZN PLT
Our Price: $4.20
STRAP HINGES 5IN ZN PLT
Our Price: $4.20
High security pinless hinge. National Hardware Light Strap Hinge, Flush/Full Inset, Series: V280, 6 Holes, 0.05 in Leaf Thickness, 1-1/16 in Door Leaf Length, 2 in Door Leaf Width, 1-1/16 in Frame Leaf Length, 2 in Frame Leaf Width, Fixed Pin, 0.119 in Diameter Pin, Aluminum Pin, Wall Mounting, 18 lb Load Capacity, 3-3/4 in Overall Length, 1-1/16 in Overall Width, Zinc Plated National Hardware Strap Hinge, Flush/Full Inset, Heavy Duty, Series: 282BC, 0.09 in Leaf Thickness, 5 in Door Leaf Length, 1.85 in Door Leaf Width, 5 in Frame Leaf Length, 1.85 in Frame Leaf Width, 0.27 in Diameter Pin, Wall Mounting, 70 lb Load Capacity, 9.54 in Overall Width, Hot Rolled Steel, Zinc Plated, BHMA A138.18
SuperSlide 75638 Closet Rod End Cap HASP SAFETY ZINC PLT FN 4-1/2 HINGE STRAP STEEL LD 2IN GALV
For use with ClosetMaid, SuperSlide wire shelving. Prevents hangers from sliding off end of closet hang rod. Insert into end of the hang rod.Two end caps per package. 0.5"H x 0.5"W x 0.5"D. Material: Resin. Non- swiveling. Adds security for doors, cabinets and gates. Rust resistant. Use in both the interior and exterior. Screws included.
HASP SAFETY 4-1/2IN ZINC STL  National Hardware V280 Flush/Full Inset Light Strap Hinge HASP SAFETY ZINC STEEL 4-1/2IN
STRAP HINGES 3IN ZN PLT
Our Price: $4.53
Use on doors, cabinets and gates with a 90 degree corner. Rust resistant. National Hardware Light Strap Hinge, Flush/Full Inset, Series: V280, 6 Holes, 0.056 in Leaf Thickness, 1-3/16 in Door Leaf Length, 3 in Door Leaf Width, 1-3/16 in Frame Leaf Length, 3 in Frame Leaf Width, Fixed Pin, 0.17 in Diameter Pin, Aluminum Pin, Wall Mounting, 5-11/16 in Overall Length, 1-3/16 in Overall Width, Hot Rolled Steel, Zinc Plated Use on cabinets, doors and gates. Mounting screws are concealed when the hasp is closed.
HINGE STRAP STEEL LD 3IN GALV National Hardware 282BC Flush/Full Inset Strap Hinge HASP SAFETY SAT BRS 2-1/2X1IN
STRAP HINGES 6IN ZN PLT
Our Price: $4.82
Use in both the interior and exterior. Screws included. National Hardware Strap Hinge, Flush/Full Inset, Heavy Duty, Series: 282BC, 0.1 in Leaf Thickness, 6 in Door Leaf Length, 2.43 in Door Leaf Width, 6 in Frame Leaf Length, 2.43 in Frame Leaf Width, 0.32 in Diameter Pin, Wall Mounting, 85 lb Load Capacity, 11.47 in Overall Width, Hot Rolled Steel, Zinc Plated, BHMA A138.18 Fixed staple. Use on doors, cabinets and gates.
HINGE STRAP STEEL LD 4IN ZINC Hi-Security 703D High Security Latching Hasp National Hardware V30 Non-Swivel Safety Hasp
Use in both the interior and exterior. Screws included. High security pinless hinge. National Hardware Safety Hasp, Non-Swivel, Series: V30, 0.44 in Diameter X 0.9 in Height Shackle, 4.56 in Length, 1-1/2 in Height, Hot Rolled Steel, Brass, Includes: Rigid Non-Swivel Staple, 3-1/4 in, For Securing a Wide Variety of Doors, Cabinets, Boxes and Trunks
Hi-Security 704D High Security Latching Hasp National Hardware V288 Hinge Hasp National Hardware V30 Non-Swivel Safety Hasp
HINGE HASPS 4IN ZN PLT
Our Price: $5.06
High security pinless hinge. National Hardware Hinge Hasp, Series: V288, 3/4 in Height Shackle, 6-1/4 in Length, 1-1/4 in Height, Hot Rolled Steel, Aluminum Pin, Zinc Plated, BHMA A138.18 Certified, 4 in, For Regular or Around the Corner Applications National Hardware Safety Hasp, Non-Swivel, Series: V30, 0.44 in Diameter X 0.9 in Height Shackle, 5.68 in Length, 1-1/2 in Height, Hot Rolled Steel, Zinc Plated, Includes: Rigid Non-Swivel Staple, BHMA A138.18 Certified, 4-1/2 in, For Securing a Wide Variety of Doors, Cabinets, Boxes and Trunks
HASP SAFETY GALV 3-1/2IN      National Hardware V30 Corrosion Resistant Safety Hasp HASP SAFETY GALV 4-1/2IN
Non- swiveling. Adds security for doors, cabinets and gates. Rust resistant. National Hardware Safety Hasp, Corrosion Resistant, Series: V30, 0.44 in Diameter Shackle, 4.56 in Length, 1-1/2 in Height, Hot Rolled Steel, Black, Includes: Rigid Non-Swivel Staple, For Doors, Cabinets, Boxes and Trunks Non- swiveling. Adds security for doors, cabinets and gates. Rust resistant.
HASP SAFETY 3-1/2IN ZINC STL  HASP SAFETY 4-1/2IN ZINC STL  HASP SAFETY HINGE DBL 3-1/2 IN
Latches without a padlock. All screws are  concealed when locked for added security. Latches without a padlock. All screws are  concealed when locked for added security. Use to secure chests, cabinets, lockers and door corners. Rust resistant.
Closetmaid 7540 Small End Cap HASP SAFETY ZINC PLT FN 6IN   HINGE STRAP STEEL LD 6IN ZINC
Vinyl end cap provides protection from cut end of wire shelving that exposes possible rough edges. Large end caps cover the large rod, 0 gauge, .25"H x .4"W x .4"D. Small end caps are for the 4 gauge wire, .2"H x .2"W x .2"D. Designed to be used with ClosetMaid - Shelf & Rod shelving. Non- swiveling. Adds security for doors, cabinets and gates. Rust resistant. Use in both the interior and exterior. Screws included.
Stanley N128-249 Strap Hinge National Hardware V280 Flush/Full Inset Light Strap Hinge National Hardware V30 Corrosion Resistant Safety Hasp
STRAP HINGES 4IN GALV
Our Price: $6.37
STRAP HINGES 4IN ZN PLT
Our Price: $6.37
National Strap Hinge, Heavy Duty, Series: N128-249, Suitable For Use With: Barn, Shed Doors, Storage Bins, Tool Boxes and Gates, 3 Holes, 4 in Door Leaf, 1.61 in Door Leaf, Tight Pin, Brass Pin, Screw Mounting, Fasteners: NO 7 Screw, Steel, Galvanized National Hardware Light Strap Hinge, Flush/Full Inset, Series: V280, 6 Holes, 0.056 in Leaf Thickness, 1-1/4 in Door Leaf Length, 4 in Door Leaf Width, 1-1/4 in Frame Leaf Length, 4 in Frame Leaf Width, Fixed Pin, 0.195 in Diameter Pin, Aluminum Pin, Wall Mounting, 8 lb Load Capacity, 7-11/16 in Overall Length, 1-1/4 in Overall Width, Zinc Plated National Hardware Safety Hasp, Corrosion Resistant, Series: V30, 0.44 in Diameter Shackle, 5.68 in Length, 1-1/2 in Height, Hot Rolled Steel, Black, Includes: Rigid Non-Swivel Staple, For Doors, Cabinets, Boxes and Trunks
HASP SAFETY 6IN SWVL ZINC STL HINGE HASP ZINC PLATED 6IN    National Hardware 282BC Flush/Full Inset Strap Hinge
HINGE HASPS 6IN ZN PLT
Our Price: $6.66
STRAP HINGES 8IN ZN PLT
Our Price: $6.82
Latches without a padlock. All screws are  concealed when locked for added security. Stanley Hinge Hasp, Series: V288, 1 Locking Holes, 6 in Length, Hot Rolled Steel, Zinc-Plated, For Regular or Around The Corner Applications National Hardware Strap Hinge, Flush/Full Inset, Heavy Duty, Series: 282BC, 0.11 in Leaf Thickness, 8 in Door Leaf Length, 3.08 in Door Leaf Width, 8 in Frame Leaf Length, 3.08 in Frame Leaf Width, 0.39 in Diameter Pin, Wall Mounting, 15.39 in Overall Width, Hot Rolled Steel, Zinc Plated, BHMA A138.18, For Residential Applications
HINGE STRAP STEEL LD 4IN GALV National Hardware V30 Non-Swivel Safety Hasp National Hardware V32 Swivel Staple Safety Hasp
SAFETY HASPS 6IN ZN PLT
Our Price: $7.07
Use in both the interior and exterior. Screws included. National Hardware Safety Hasp, Non-Swivel, Series: V30, 0.44 in Diameter X 0.9 in Height Shackle, 8.68 in Length, 1-3/4 in Height, Hot Rolled Steel, Zinc Plated, Includes: Rigid Non-Swivel Staple, BHMA A138.18 Certified, 6 in, For Securing a Wide Variety of Doors, Cabinets, Boxes and Trunks National Hardware Safety Hasp, Swivel Staple, Series: V32, 0.41 in Diameter X 1.2 in Height Shackle, 4.48 in Length, 1-1/2 in Height, Hot Rolled Steel, Aluminum Pin, Zinc Plated, BHMA A138.18 Certified, 3-1/4 in, For Securing a Wide Variety of Doors, Cabinets, Boxes and Trunks
National Hardware V34 Double Hinge Safety Hasp HASP SAFETY HINGE DBL 4-1/2IN HASP SAFETY GLV 4-1/2INX1-1/2
National Hardware Safety Hasp, Double Hinge, Series: V34, 6-1/4 in Length, 1-1/2 in Height, Cold Rolled Steel, Aluminum Pin, Zinc Plated, Includes: Rigid Non-Swivel Staple, BHMA A138.18 Certified, 3-1/4 in, For Around the Corner Applications on Lockers, Chests, Tool Boxes and Doors Use to secure chests, cabinets, lockers and door corners. Rust resistant. For both indoor and outdoor use. Rust resistant.
National Hardware V32 Swivel Staple Safety Hasp SuperSlide 25633 Corner Corner Round Bar HASP SAFETY GALV 2-1/2IN
National Hardware Safety Hasp, Swivel Staple, Series: V32, 0.41 in Diameter X 1.2 in Height Shackle, 5.61 in Length, 1-1/2 in Height, Hot Rolled Steel, Aluminum Pin, Zinc Plated, BHMA A138.18 Certified, 4-1/2 in, For Securing a Wide Variety of Doors, Cabinets, Boxes and Trunks Use with SuperSlide shelving to create uninterrupted sliding action around corners for walk-in closets. Tapered ends slide easily into ClosetMaid, SuperSlide hang rods. Support connection of hang rod with a Hang Bar Support. 0.75?H x 10.25?W x 10.25?DMaterial: Epoxy coated steel. Designed to secure a wide variety of doors, cabinets, boxes, trunks, etc. For security, all screws are concealed when hasp is closed. Ribbed design for extra strength. Includes rigid non-swivel staple. Visual-pack.
National Hardware V280 Flush/Full Inset Light Strap Hinge National Hardware V30 Non-Swivel Safety Hasp National Hardware V32 Corrosion Resistant Swivel Staple Safety Hasp
STRAP HINGES 5IN ZN PLT
Our Price: $8.09
National Hardware Light Strap Hinge, Flush/Full Inset, Series: V280, 6 Holes, 0.072 in Leaf Thickness, 1-1/2 in Door Leaf Length, 5 in Door Leaf Width, 1-1/2 in Frame Leaf Length, 5 in Frame Leaf Width, Fixed Pin, 0.195 in Diameter Pin, Aluminum Pin, Wall Mounting, 9-5/8 in Overall Length, 1-1/2 in Overall Width, Hot Rolled Steel, Zinc Plated National Hardware Safety Hasp, Non-Swivel, Series: V30, 0.44 in Diameter X 0.9 in Height Shackle, 4.56 in Length, 1-1/2 in Height, Hot Rolled Steel, Stainless Steel Pin, Galvanized, Includes: Rigid Non-Swivel Staple, BHMA A138.18 Certified, 3-1/4 in, For Securing a Wide Variety of Doors, Cabinets, Boxes and Trunks National Hardware Swivel Staple Safety Hasp, Corrosion Resistant, Series: V32, 0.41 in Diameter Shackle, 4.48 in Length, 1-1/2 in Height, Hot Rolled Steel, Black, Includes: Fasteners, For Doors, Cabinets, Boxes and Trunks
National Hardware V30 Non-Swivel Safety Hasp HINGE STRAP STEEL LD 6IN GALV National Hardware V37 Weather Resistant Safety Hasp
SAFETY HASPS 3-1/4IN SS
Our Price: $8.41
National Hardware Safety Hasp, Non-Swivel, Series: V30, 0.44 in Diameter X 0.9 in Height Shackle, 5.68 in Length, 1-1/2 in Height, Hot Rolled Steel, Stainless Steel Pin, Galvanized, Includes: Rigid Non-Swivel Staple, BHMA A138.18 Certified, 4-1/2 in, For Securing a Wide Variety of Doors, Cabinets, Boxes and Trunks Use in both the interior and exterior. Riveted brass pin. 1.8mm thickness. National Hardware Safety Hasp, Weather Resistant, Series: V37, 9/32 in Diameter Shackle, 3-1/4 in Length, Stainless Steel, BHMA A138.18 Certified, For Boxes, Chests and Cabinets
National Hardware V32 Corrosion Resistant Swivel Staple Safety Hasp National Hardware V34 Double Hinge Safety Hasp HINGE STRAP GALV 5IN
STRAP HINGES 5IN GALV
Our Price: $8.88
National Hardware Swivel Staple Safety Hasp, Corrosion Resistant, Series: V32, 0.41 in Diameter Shackle, 5.61 in Length, 1-1/2 in Height, Hot Rolled Steel, Black, Includes: Fasteners, For Doors, Cabinets, Boxes and Trunks National Hardware Safety Hasp, Double Hinge, Series: V34, 8.19 in Length, 1-1/2 in Height, Cold Rolled Steel, Aluminum Pin, Zinc Plated, Includes: Rigid Non-Swivel Staple, BHMA A138.18 Certified, 4-1/2 in, For Around the Corner Applications on Lockers, Chests, Tool Boxes and Doors Offset screw holes for extra strength and to prevent wood from splitting. Tight pin for left or right hand applications. Safe working load: 33 lbs. Boxed loose.
HASP SAFETY ZN STL 6X1-3/4IN  Mintcraft LSH-Z02-013L Light Duty Strap Hinge National Hardware V32 Swivel Staple Safety Hasp
SAFETY HASPS 6IN ZN PLT
Our Price: $9.18
Screws are concealed when hasp is locked. Rust resistant. Zinc plated. Adjustable staple. Use in both the interior and exterior. Rust resistant. National Hardware Safety Hasp, Swivel Staple, Series: V32, 0.41 in Diameter X 1.2 in Height Shackle, 8.62 in Length, 1-3/4 in Height, Hot Rolled Steel, Aluminum Pin, Zinc Plated, BHMA A138.18 Certified, 6 in, For Securing a Wide Variety of Doors, Cabinets, Boxes and Trunks
HASP SAFETY GALV STL 6 INCH   Master Lock 720DPF Single Hinge Latching Hasp SuperSlide 2058 Closet Rod
Non- swiveling. Adds security for doors, cabinets and gates. Rust resistant. Designed to fit most corners and angles to secure hard-to-lock properly. Recommended for use with Master Lock medium and high security padlocks. Heavy gauge hardened steel protects against cutting and sawing. Hardened Boron alloy staple withstands up to 8 tons of cutting force. Rolled edges protect against prying and conceal mounting screws. Hinge pins are hidden and are virtually impossible to remove. Accepts shackle diameters up to 7/16". Snaps into the Closet Rod Support to allow hangers to slide without interruption. Can be cut to customize length . Holds up to 30lbs per foot. Material: Epoxy coated steel.
Stanley N128-322 Strap Hinge National Hardware V37 Weather Resistant Safety Hasp HASP SAFETY GALV 3-1/4IN
STRAP HINGES 6IN GALV
Our Price: $10.07
SAFETY HASPS 4-1/2IN SS
Our Price: $10.10
SAFETY HASPS 3-1/4IN GALV
Our Price: $10.32
National Strap Hinge, Heavy Duty, Series: N128-322, Suitable For Use With: Barn, Shed Doors, Storage Bins, Tool Boxes and Gates, 4 Holes, 6 in Door Leaf, 2.43 in Door Leaf, Tight Pin, Brass Pin, Screw Mounting, Fasteners: NO 9 Screw, Steel, Galvanized National Hardware Safety Hasp, Weather Resistant, Series: V37, 9/32 in Diameter Shackle, 4-1/2 in Length, Stainless Steel, BHMA A138.18 Certified, For Boxes, Chests and Cabinets Stanley Swivel Staple Safety Hasp, Series: V32, 1 Locking Holes, 3-1/4 in Length, 1-1/2 in Width, Steel, Galvanized, For Securing a Wide Variety of Doors, Cabinets, Boxes and Trunks
National Hardware V30 Non-Swivel Safety Hasp HINGE STRAP STEEL HD 4IN ZINC HINGE STRAP STL HD 4IN BLACK
SAFETY HASPS 6IN GALV
Our Price: $10.32
National Hardware Safety Hasp, Non-Swivel, Series: V30, 8.68 in Length, 1-3/4 in Height, Hot Rolled Steel, Galvanized, Includes: Rigid Non-Swivel Staple, BHMA A138.18 Certified, 6 in, For Securing a Wide Variety of Doors, Cabinets, Boxes and Trunks Ideal for doors, gates, sheds and toolboxes. Screws included. Ideal for doors, gates, sheds and toolboxes. Screws included.
National Hardware V32 Swivel Staple Safety Hasp American Lock A885D Double Hinge Locking Hasp Master Lock 706D High Security Hasp
SAFETY HASPS 4-1/2IN GALV
Our Price: $10.68
National Hardware Safety Hasp, Swivel Staple, Series: V32, 0.41 in Diameter X 1.2 in Height Shackle, 5.61 in Length, 1-1/2 in Height, Hot Rolled Steel, Brass Pin, Galvanized, BHMA A138.18 Certified, 4-1/2 in, For Securing a Wide Variety of Doors, Cabinets, Boxes and Trunks Zinc plated. Resists cutting, sawing, and hammering. Ideal for corners and angles. Mounting hardware included. Accepts shackle diameter up to 7/16". High security pinless hinge.
HINGE STRAP STL HD 6IN BLACK  National Hardware 282BC Flush/Full Inset Strap Hinge Master Lock 730DPF Straight Bar Safety Hasp
STRAP HINGES 10IN ZN PLT
Our Price: $12.00
Ideal for doors, gates, sheds and toolboxes. Screws included. National Hardware Strap Hinge, Flush/Full Inset, Heavy Duty, Series: 282BC, 0.36 in Hole Diameter, 0.14 in Leaf Thickness, 10 in Door Leaf Length, 3.68 in Door Leaf Width, 10 in Frame Leaf Length, 3.68 in Frame Leaf Width, 0.44 in Diameter Pin, Wall Mounting, 20 in Overall Width, Hot Rolled Steel, Zinc Plated, BHMA A138.18 Zinc plated hardened steel for added strength and weatherability. Hardened steel staple resists cutting, sawing and hammering. Hasp body conceals mounting hardware. Use for securing utility vans, trailers, gang boxes, and vending machines.  Accepts shackle diameter up to 7/16".
Mintcraft LSH-Z03-013L Light Duty Strap Hinge Master Lock 722D Double Hinge High Security Hasp HINGE STRAP GALV 8IN
STRAP HINGES 8IN GALV
Our Price: $14.54
Use in both the interior and exterior. Rust resistant. Designed to fit most corners and angles to secure hard-to-lock property. Recommended for use with Master Lock medium and high security padlocks. Heavy gauge hardened steel protects against cutting and sawing. Hardened Boron alloy staple withstands up to 8 tons of cutting force. Rolled edges protect against prying and conceal mounting screws. Hinge pins are hidden and are virtually impossible to remove. Accepts shackle diameters up to 7/16". Offset screw holes for extra strength and to prevent wood from splitting. Tight pin for left or right hand applications. Safe working load: 33 lbs. Boxed loose.
National Hardware V39 Weather Resistant Swivel Staple Safety Hasp HINGE STRAP STEEL EX-HD 5IN SS HINGE HASP HD ZN STL 4X1-3/4IN
SAFETY HASPS 3-1/4IN SS
Our Price: $14.58
National Hardware Swivel Staple Safety Hasp, Weather Resistant, Series: V39, 3-1/4 in Length, Stainless Steel, BHMA A138.18 Certified, For Doors, Cabinets, Boxes and Trunks Ideal for doors, gates, sheds and toolboxes. Screws included. Use to secure chests, cabinets, lockers and door corners. Rust resistant.
National Hardware V39 Weather Resistant Swivel Staple Safety Hasp National Hardware V33 Extra Heavy Hinge Hasp National Hardware V281 Flush/Full Inset Strap Hinge
SAFETY HASPS 4-1/2IN SS
Our Price: $15.66
STRAP HINGES 6IN SS
Our Price: $16.00
National Hardware Swivel Staple Safety Hasp, Weather Resistant, Series: V39, 4-1/2 in Length, Stainless Steel, BHMA A138.18 Certified, For Doors, Cabinets, Boxes and Trunks National Hardware Hinge Hasp, Extra Heavy, Series: V33, 7.19 in Length, 1.88 in Height, Steel, Zinc Plated, Includes: Case Hardened Staple, BHMA A138.18 Certified, 7-1/4 in National Hardware Strap Hinge, Flush/Full Inset, Heavy Duty, Series: V281, 6 in Door Leaf Length, 6 in Frame Leaf Length, Fixed Pin, Wall Mounting, Stainless Steel, Stainless Steel, BHMA A138.18, For Commercial/Industrial and Residential Applications
HINGE STRAP STEEL EX-HD 6IN SS Stanley 127357 Light Duty Strap Hinge HINGE STRAP STEEL EX-HD 4IN SS
Ideal for doors, gates, sheds and toolboxes. Screws included. With aluminum pin, for barn and shed doors, tool boxes, chests and gates. Ideal for doors, gates, sheds and toolboxes. Screws included.
HINGE STRAP STEEL HD 6IN GALV Mintcraft LSH-Z04-013L Light Duty Strap Hinge National Hardware V30 Non-Swivel Safety Hasp
SAFETY HASPS 7IN ZN PLT
Our Price: $20.38
Ideal for doors, gates, sheds and toolboxes. Screws included. Use in both the interior and exterior. Rust resistant. National Hardware Safety Hasp, Non-Swivel, Series: V30, 0.85 in Diameter X 1.43 in Height Shackle, 9.81 in Length, 2-1/2 in Height, Hot Rolled Steel, Zinc Plated, Includes: Rigid Non-Swivel Staple, BHMA A138.18 Certified, 7 in, For Securing a Wide Variety of Doors, Cabinets, Boxes and Trunks
National Hardware V31 Rust Resistant Safety Hasp HINGE STRAP ZINC PLATED 12IN  HASP SAFETY GALV 7-1/4IN
SAFETY HASPS 7-1/2IN SS
Our Price: $21.33
STRAP HINGES 12IN ZN PLT
Our Price: $21.52
SAFETY HASPS 7-1/4IN GALV
Our Price: $22.32
National Hardware Safety Hasp, Heavy Duty, Rust Resistant, Series: V31, 7-1/2 in Length, Stainless Steel, Gray, Includes: Fasteners, BHMA A138.18 Certified, For Doors, Chests and Lockers National Strap Hinge, Heavy Duty, Wall Mounting, 12 in Overall Length, 12 ga Steel, Zinc-Plated, For Home, Farm, Builder or Industrial Customers Stanley Swivel Safety Hasp, Series: V33, Extra Heavy Duty, 1 Locking Holes, 7-1/4 in Length, Steel, Galvanized, For Storage Sheds, Warehouse Doors, Cabins and Trailers
Stanley 127506 Light Duty Strap Hinge Closetmaid 1061 Shelf Kit HINGE STRAP STEEL HD 8IN GALV
With aluminum pin, for barn and shed doors, tool boxes, chests and gates. Prepack shelving with all hardware needed for installation included. Provides extra storage space for any room. Ideal for doors, gates, sheds and toolboxes. Screws included.
Mintcraft LSH-Z06-013L Light Duty Strap Hinge Mintcraft HSH-Z04-013L Strap Hinge Mintcraft HSH-Z08-013L Strap Hinge
Use in both the interior and exterior. Rust resistant. Reinforces doors, gates and sheds. Reinforces doors, gates and sheds.
Closetmaid 1640 Closet Organizer Mintcraft HSH-Z05-013L Strap Hinge SuperSlide 4714 Wire Shelf
Up to 5 feet closet organizer kit with all hardware included. Sturdy steel construction. Size: 5' hanging space and 7' shelf space. Reinforces doors, gates and sheds. Durable vinyl coated steel rods. All purpose storage shelf. 1" deep.
Mintcraft HSH-Z06-013L Strap Hinge Closetmaid 1021 Linen Shelf Kit Closetmaid 1628 Closet Organizer Kit
Reinforces doors, gates and sheds. Prepack shelving with all hardware needed for installation included. Provides extra storage space for any room. 5' to 8' closet organizer kit with all hardware included. Sturdy steel construction. 10-1/2' hanging space and 11' of shelf space.
SuperSlide 4717 Wire Shelf Closetmaid 1031 Shelf Kit Mintcraft HSH-Z10-013L Strap Hinge
Durable vinyl coated steel rods. All purpose storage shelf. 1" deep. Prepack shelving with all hardware needed for installation included. Provides extra storage space for any room. Reinforces doors, gates and sheds.
Closetmaid 1608 Deluxe Closet Organizer Kit SuperSlide 5636 Closet Organizer Kit SuperSlide 2057 Closet Rod
5' to 8' closet organizer kit with all hardware included. Sturdy steel construction. 10-1/2' hanging space and 13-1/2' shelf space. Utilizes "SuperSlide" shelving to provide a continuous hanger slide. For 5' to 8' closets. All hardware included. Sturdy steel construction. Size: 9' hanging space and 12' shelf space. Snaps into the Closet Rod Support to allow hangers to slide without interruption. Can be cut to customize length . Holds up to 30lbs per foot. Material: Epoxy coated steel.
Closetmaid 1361 Wardrobe Shelf Closetmaid 1041 Shelf Kit Closetmaid 6222 Hang Basket
Sturdy ventilated vinyl coated steel wire construction. Economical Shelf & Rod shelving provides shelf and hanging space for bedroom, laundry or where extra space is needed. No need to purchase a hang rod, it is constructed into the shelving unit. Support brackets and wall anchors sold separately. Prepack shelving with all hardware needed for installation included. Provides extra storage space for any room. 17 in. wide hanging basket instantly creates additional storage. Hang multiple baskets. This sturdy wire bin does not need additional hardware; hooks directly to shelf. Perfect to use under the 24 in. or wider wire shelves. Fits any wire shelving. Material: Epoxy coated steel.
SuperSlide 4735 Linen Organizer Wire Shelf Closetmaid 21066 Shelf and Rod Corner Kit Mintcraft HSH-Z12-013L Strap Hinge
Ventilated design keeps clothing and linens fresh. Add SuperSlide hardware components to convert to a hanging shelf where hangers slide continuously. Use SuperSlide shelf by itself for storage. Install shelf inverted with lip up to create shoe shelf. Sturdy vinyl coated steel wire construction. By installing in corner with shelves connecting, this shelf creates a usable corner so that hangers continue around corner. Installation hardware for corner shelf included. Shelving sold separately. Steel coated with vinyl. Reinforces doors, gates and sheds.
Closetmaid 1363 Wardrobe Shelf SuperSlide 4719 Wire Shelf Closetmaid 8279 Laundry Shelf
Sturdy ventilated vinyl coated steel wire construction. Economical Shelf & Rod shelving provides shelf and hanging space for bedroom, laundry or where extra space is needed. No need to purchase a hang rod, it is constructed into the shelving unit. Support brackets and wall anchors sold separately. Ventilated design keeps clothing and linens fresh. Add SuperSlide hardware components to convert to a hanging shelf where hangers slide continuously. Use SuperSlide shelf by itself for storage. Install shelf inverted with lip up to create shoe shelf. Sturdy vinyl coated steel wire construction. Ventilated wire shelf with space for hangers. Wire spacing provides storage for small items or books. Installation hardware included. Material: Epoxy coated steel.
Closetmaid 1078 Shelf and Rod Wire Shelf Closetmaid 37300 Wardrobe Shelf Closetmaid 1395 Close Mesh Wire Shelf
Sturdy ventilated vinyl coated steel wire construction. Economical Shelf & Rod shelving provides shelf and hanging space for bedroom, laundry or where extra space is needed. No need to purchase a hang rod, it is constructed into the shelving unit. Support brackets and wall anchors sold separately. Sturdy ventilated vinyl coated steel wire construction. Economical Shelf & Rod shelving provides shelf and hanging space for bedroom, laundry or where extra space is needed. No need to purchase a hang rod, it is constructed into the shelving unit. Support brackets and wall anchors sold separately. Sturdy vinyl coated steel wire construction.Wires are spaced 5/8 in. apart versus the 1 in. on our other wire shelving. Keeps small items in the pantry from tipping over. Install with the ShelfTrack system and create a fully adjustable pantry. Installation hardware sold separately. Can be cut to custom lengths.
Closetmaid 21067 Corner Shelf Kit Closetmaid 3731021 Shelf Liner Closetmaid 77545 Shelf End Cap
By installing in corner with shelves connecting, this shelf creates a usable corner so that hangers continue around corner. Installation hardware for corner shelf included. Shelving sold separately. Steel coated with vinyl. Ventilated design keeps clothing and linens fresh. Add SuperSlide hardware components to convert to a hanging shelf where hangers slide continuously. Use SuperSlide shelf by itself for storage. Install shelf inverted with lip up to create shoe shelf. Sturdy vinyl coated steel wire construction. These end caps cover both ends of 0 gauge wire of ClosetMaid - Shelf & Rod ventilated shelving. End caps keep hangers from sliding off exposed ends. 0.5"H x 2"W x 0.5"D
Closetmaid 1396 Close Mesh Wire Shelf SuperSlide 4737 Linen Wire Shelf Closetmaid 3732521 Linen Shelf
Sturdy vinyl coated steel wire construction.Wires are spaced 5/8 in. apart versus the 1 in. on our other wire shelving. Keeps small items in the pantry from tipping over. Install with the ShelfTrack system and create a fully adjustable pantry. Installation hardware sold separately. Can be cut to custom lengths. Durable vinyl coated steel rods. All purpose storage shelf. 1" deep. Ventilated design keeps clothing and linens fresh. Add SuperSlide hardware components to convert to a hanging shelf where hangers slide continuously. Use SuperSlide shelf by itself for storage. Install shelf inverted with lip up to create shoe shelf. Sturdy vinyl coated steel wire construction.
Closetmaid 37305 Wardrobe Shelf Closetmaid 37402 Close Mesh Wire Shelf Closetmaid 37318 Close Mesh Wire Shelf
Sturdy ventilated vinyl coated steel wire construction. Economical Shelf & Rod shelving provides shelf and hanging space for bedroom, laundry or where extra space is needed. No need to purchase a hang rod, it is constructed into the shelving unit. Support brackets and wall anchors sold separately. Sturdy vinyl coated steel wire construction.Wires are spaced 5/8 in. apart versus the 1 in. on our other wire shelving. Keeps small items in the pantry from tipping over. Install with the ShelfTrack system and create a fully adjustable pantry. Installation hardware sold separately. Can be cut to custom lengths. Sturdy vinyl coated steel wire construction.Wires are spaced 5/8 in. apart versus the 1 in. on our other wire shelving. Keeps small items in the pantry from tipping over. Install with the ShelfTrack system and create a fully adjustable pantry. Installation hardware sold separately. Can be cut to custom lengths.
Closetmaid 35913 Total Slide Shelf Closetmaid 37403 Close Mesh Wire Shelf SuperSlide 35917 Total Slide Shelf
Continuous slide all-in-one shelf and rod solution. Sturdy vinyl coated steel wire construction.Wires are spaced 5/8 in. apart versus the 1 in. on our other wire shelving. Keeps small items in the pantry from tipping over. Install with the ShelfTrack system and create a fully adjustable pantry. Installation hardware sold separately. Can be cut to custom lengths. Continuous slide all-in-one shelf and rod solution.
   
 
1