Home > HARDWARE > BUILDERS HARDWARE > HINGES > UTILITY HINGES
Sort By:
1
HINGE NRW ZINC PLATED 1-1/2IN HINGE NRW ZINC PLATED 1IN     SuperSlide 948 Pre-Loaded Wall Bracket
518. Swaged for mortise installations. Manufactured from cold-rolled steel, with non-removable steel pin. Tight pin to allow for left or right hand applications. Boxed loose. 518. Swaged for mortise installations. Manufactured from cold-rolled steel, with non-removable steel pin. Tight pin to allow for left or right hand applications. Boxed loose. Secures shelf to side wall of closet. Pre-loaded with pins and anchors, no screws needed. Accommodates pole clips and shelf stops in "TotalSlide" system.
Closetmaid 01016 End Cap SuperSlide 5629 Closet Rod Support HINGE NRW ZINC PLATED 1-1/2IN
Vinyl end cap provides protection from cut end of wire shelving that exposes possible rough edges. Large end caps cover the large rod, 0 gauge, .25"H x .4"W x .4"D. Small end caps are for the 4 gauge wire, .2"H x .2"W x .2"D. Designed to be used with ClosetMaid - Shelf & Rod shelving. SuperSlide shelving and hardware allows hangers to slide freely on both Fixed Mount and ShelfTrack mounting systems. Hangers slide without interruption. Snaps onto SuperSlide shelf to support hang rod. Use one every 36 in. of hang rod and at each end of shelf and hang rod. 5.75"H x 0.87"W x 3.87"D. Material: Resin 518. Swaged for mortise installations. Manufactured from cold-rolled steel, with non-removable steel pin. Tight pin to allow for left or right hand applications. Boxed loose.
HINGE NRW ZINC PLATED 2IN     HINGE NRW ZINC PLATED 2-1/2IN HINGE UTILITY STEEL 2X2IN ZN
518. Swaged for mortise installations. Manufactured from cold-rolled steel, with non-removable steel pin. Tight pin to allow for left or right hand applications. Boxed loose. 518. Swaged for mortise installations. Manufactured from cold-rolled steel, with non-removable steel pin. Tight pin to allow for left or right hand applications. Boxed loose. Five knuckle full mortise design. Allows easy installation or removal of lightweight doors. Screws included.
HASP SAFETY ZINC PLT 2-1/2IN  HINGE UTL STL ZN PLTD 1INX1IN HINGE UTILITY SQ CNR 2X1-1/2IN
Non- swiveling. Adds security for doors, cabinets and gates. Rust resistant. Lightweight steel construction. 3 Knuckles. Lightweight steel construction. 3 Knuckles.
SuperSlide 6609 Pre-Loaded Wall Bracket Closetmaid 6610 Wall Clip BRACKET SUPPORT SHOE SHELF WHT
Heavy duty preloaded wall bracket with anchor, mounts to the side wall and holds the end of the SuperSlide shelf and Hang Rod. Supports front lip of shelving and hang rod where they meet the side wall. With pre-loaded pins. For drywall installations. 4.125"H x 1.75"W x 2"D. Material: Resin. Anchors shelf to wall. Ensures stability of shelf. For wire shelving, converts almost any wire shelf to a shoe shelf. Make a shoe shelf by inverting shelf, lip facing up. Holds shoes away from wall at an angle. Use 1 shoe support bracket every 24 in. Does not work with Close Mesh shelving. 6.125"H x 1.25"W x 4.75"D.
HINGE NRW ZINC PLATED 3IN     HINGE UTL ZN PLT 1-1/2X1-3/8IN SuperSlide 5655 Closet Rod Support
518. Swaged for mortise installations. Manufactured from cold-rolled steel, with non-removable steel pin. Tight pin to allow for left or right hand applications. Boxed loose. Lightweight steel construction. 3 Knuckles. Converts shelf & rod shelving to a continous slide. Hang rod snaps into bracket to create an continuous slide for hangers. Snaps onto SuperSlide shelf to support hang rod. Use one every 36 in. (91,44cm) of hang rod and at each end of shelf and hang rod. 5.75"H x 0.87"W x 3.87"D. Material: Resin.
Closetmaid 1002 Joiner Plate HINGE UTL SQ CNR ZN STL 1X1IN Closetmaid 6620 Wall Bracket
Use to join 2 shelves together to create a continuous run of shelving. Supports the joining of 2 wire shelves. One set consists of 2 joiner plates, 1 bolt and 1 nut. NOT for use with Close Mesh shelving. 1.19?H x 2.25?W x 1.13?D. Material: Resin. Five knuckle full mortise design. Allows easy installation or removal of lightweight cabinet doors. Screws included. Heavy duty preloaded bracket with anchor easily mounts to the wall and holds the end of any size ClosetMaid shelf. Provides side wall support. Supports front lip of shelving where it meets the side wall. For drywall installations. Includes: 2.875"H x 2.125"W x 1.75"D. Material: Resin.
SuperSlide 6641 Wall Bracket HASP SAFETY GALV 2-1/2IN      SuperSlide 75651 Closet Rod Connector
Supports low profile SuperSlide shelving in a wall to wall installation. Includes: 2 wall brackets, 4 pins and 4 anchors. Use in conjunction with support brackets and wall clips for installing wire shelving. Suports front lip of shelving where it meets the side wall. 2"H x 2.19W x 1.75"D. Material: Resin Non- swiveling. Adds security for doors, cabinets and gates. Rust resistant. Use with SuperSlide shelving to create uninterrupted sliding action around corners for walk-in closets. Keeps hangers from sliding off exposed ends. Support the connection of the two pieces of hang rod with a hang bar support. 2"H x 0.5"W x 0.5"D. Material: Plastic.
Stanley 139659 Door Hinge HINGE UTL SQ CNR ZN PLT 3X2IN HINGE UTILITY 2-1/2X2-1/2IN ZN
504. Designed for general utility and industrial applications. Hinges are swaged for mortise installations. Loose pin allows doors to be removed without taking off hinges. Plain steel version can be welded. Boxed. Lightweight steel construction. 3 Knuckles. Five knuckle full mortise design. Allows easy installation or removal of lightweight doors. Screws included.
National Hardware V30 Non-Swivel Safety Hasp HINGE BRD PLN STL 2IN         National Hardware V30 Non-Swivel Safety Hasp
National Hardware Safety Hasp, Non-Swivel, Series: V30, 0.34 in Diameter X 0.62 in Height Shackle, 2.43 in Length, 3/4 in Height, Hot Rolled Steel, Zinc Plated, Includes: Rigid Non-Swivel Staple, BHMA A138.18 Certified, 1-3/4 in, For Securing a Wide Variety of Doors, Cabinets, Boxes and Trunks 505. Swaged for mortise installations. Manufactured with cold rolled steel. Five knuckle, full mortise design. Riveted, non-removable pin. Boxed loose barcoded. National Hardware Safety Hasp, Non-Swivel, Series: V30, 0.35 in Diameter X 0.7 in Height Shackle, 3.57 in Length, 1 in Height, Hot Rolled Steel, Zinc Plated, Includes: Rigid Non-Swivel Staple, BHMA A138.18 Certified, 2-1/2 in, For Securing a Wide Variety of Doors, Cabinets, Boxes and Trunks
HASP SAFETY ADJ ZINC 3-1/2IN  HINGE BRD ZINC PLATED 2IN     HINGE UTL SQ CNR Z 1-1/2X1-3/8
BROAD HINGES 2IN ZN PLT
Our Price: $3.60
Screws are concealed when hasp is locked. Rust resistant. Zinc plated. Adjustable staple. 504. Swaged for mortise installations. Manufactured with cold rolled steel. Five knuckle, full mortise design. Loose pin allows doors to be removed without removing hinge. Boxed loose barcoded. Five knuckle full mortise design. Allows easy installation or removal of lightweight cabinet doors. Screws included.
Closetmaid 1180 Support Bracket HINGE UTL GALV 2-1/2X2-1/2IN  Closetmaid 1001 Corner Support Bracket
Closetmaid Support Bracket, 12 in Length, 2 in Width, 2 in Depth, Steel, Epoxy Coated, White, Suitable For Use With: Wire Shelving, Includes: (1) Support Bracket, (1) Anchor, (1) NO 8 Pin Five knuckle full mortise design. Allows easy installation or removal of lightweight doors. Screws included. Supports front lip of shelving to keep it level where it meets another shelf in a corner. Snap in place design. For corner installations.  0.375?H x 5?W x 0.75?D. Material: steel, coated with epoxy.
HINGE BRD ZINC PLATED 2IN     HASP SAFETY ZINC STEEL 3-1/2IN National Hardware V30 Non-Swivel Safety Hasp
BROAD HINGES 2IN ZN PLT
Our Price: $3.68
National Hardware Door Hinge, Series: 505BC, Full Mortise, 4 Holes, 0.3125 in Hole Diameter, 0.77 in Leaf Thickness, Non-Removable, Riveted Pin, 0.19 in Dia Pin, Fasteners: 5-Knuckle, 38 lb Load Capacity, 2 in Overall Length, 2 in Overall Width, Cold Rolled Steel, Zinc Plated, Standards: BHMA A138.18 Use on cabinets, doors and gates. Mounting screws are concealed when the hasp is closed. National Hardware Safety Hasp, Non-Swivel, Series: V30, 0.44 in Diameter X 0.9 in Height Shackle, 4.56 in Length, 1-1/2 in Height, Hot Rolled Steel, Zinc Plated, Includes: Rigid Non-Swivel Staple, BHMA A138.18 Certified, 3-1/4 in, For Securing a Wide Variety of Doors, Cabinets, Boxes and Trunks
Stanley 131193 Hinge Screw Eye HINGE UTL SQ CNR ZN 2X1-1/2IN National Hardware N145-920 Flush/Full Inset Square Corner Narrow Hinge
To be used in wood gate applications in conjunction with screw hooks, bolt hooks and pintles. Five knuckle full mortise design. Allows easy installation or removal of lightweight cabinet doors. Screws included. National Hardware Narrow Hinge, Flush/Full Inset, Square Corner, Series: V518, 4 Holes, 0.16 in Hole Diameter, 0.05 in Leaf Thickness, 1 in Door Leaf Length, 1 in Frame Leaf Length, Non-Removable Pin, 0.1 in Diameter Pin, Steel Pin, Wall Mounting, Fasteners: Screws, 7 lb Load Capacity, 1 in Overall Width, Cold Rolled Steel, Zinc Plated
Stanley 130112 Screw Hook Stanley 139733 Weldable Door Hinge National Hardware N146-043 Flush/Full Inset Square Corner Narrow Hinge
For use with new installations with Stanley's 130732, 131102, 248047, 131060, 130765, and 130799 hinge straps. Adjusts to correct gate sag. 504. Designed for general utility and industrial applications. Hinges are swaged for mortise installations. Loose pin allows doors to be removed without taking off hinges. Plain steel version can be welded. Boxed. National Hardware Narrow Hinge, Flush/Full Inset, Square Corner, Series: V518, 4 Holes, 0.2 in Hole Diameter, 0.05 in Leaf Thickness, 1-1/2 in Door Leaf Length, 1-1/2 in Frame Leaf Length, Non-Removable Pin, 0.11 in Diameter Pin, Steel Pin, Wall Mounting, Fasteners: Screws, 7 lb Load Capacity, 1-1/2 in Overall Width, Cold Rolled Steel, Zinc Plated
HASP SAFETY ZINC PLT 3-1/2IN  HINGE BRD ZINC PLATED 2-1/2IN National Hardware V30 Non-Swivel Safety Hasp
Non- swiveling. Adds security for doors, cabinets and gates. Rust resistant. 504. Swaged for mortise installations. Manufactured with cold rolled steel. Five knuckle, full mortise design. Loose pin allows doors to be removed without removing hinge. Boxed loose barcoded. National Hardware Safety Hasp, Non-Swivel, Series: V30, 0.35 in Diameter X 0.7 in Height Shackle, 3.57 in Length, 1 in Height, Hot Rolled Steel, Brass, Includes: Rigid Non-Swivel Staple, 2-1/2 in, For Securing a Wide Variety of Doors, Cabinets, Boxes and Trunks
National Hardware N145-946 Flush/Full Inset Square Corner Narrow Hinge Stanley 139808 Door Hinge HASP SAFETY ZN STL 4-1/2IN
NARROW HINGES 1IN BRS
Our Price: $4.07
National Hardware Narrow Hinge, Flush/Full Inset, Square Corner, Series: V518, 4 Holes, 0.16 in Hole Diameter, 0.05 in Leaf Thickness, 1 in Door Leaf Length, 1 in Frame Leaf Length, Non-Removable Pin, 0.1 in Diameter Pin, Steel Pin, Wall Mounting, Fasteners: Screws, 7 lb Load Capacity, 1 in Overall Width, Cold Rolled Steel, Brass 504. Designed for general utility and industrial applications. Hinges are swaged for mortise installations. Loose pin allows doors to be removed without taking off hinges. Plain steel version can be welded. Boxed. Screws are concealed when hasp is locked. Rust resistant. Zinc plated. Adjustable staple.
Master Lock 702D High Security Hasp HINGE BRD PLN STL 3IN         HINGE BRD ZINC PLATED 2-1/2IN
High security pinless hinge. 505. Swaged for mortise installations. Manufactured with cold rolled steel. Five knuckle, full mortise design. Riveted, non-removable pin. Boxed loose barcoded. National Hardware Door Hinge, Series: 505BC, Full Mortise, 6 Holes, 0.23 in Hole Diameter, 0.09 in Leaf Thickness, Non-Removable, Riveted Pin, 0.21 in Dia Pin, Fasteners: 5-Knuckle, 43 lb Load Capacity, 2-1/2 in Overall Length, 2.61 in Overall Width, Cold Rolled Steel, Zinc Plated, Standards: BHMA A138.18
National Hardware N146-159 Flush/Full Inset Square Corner Narrow Hinge National Hardware N146-068 Flush/Full Inset Square Corner Narrow Hinge SuperSlide 75638 Closet Rod End Cap
National Hardware Narrow Hinge, Flush/Full Inset, Square Corner, Series: V518, 4 Holes, 0.23 in Hole Diameter, 0.06 in Leaf Thickness, 2 in Door Leaf Length, 2 in Frame Leaf Length, Non-Removable Pin, 0.12 in Diameter Pin, Steel Pin, Wall Mounting, Fasteners: Screws, 10 lb Load Capacity, 2 in Overall Width, Cold Rolled Steel, Zinc Plated National Hardware Narrow Hinge, Flush/Full Inset, Square Corner, Series: V518, 4 Holes, 0.2 in Hole Diameter, 0.05 in Leaf Thickness, 1-1/2 in Door Leaf Length, 1-1/2 in Frame Leaf Length, Non-Removable Pin, 0.11 in Diameter Pin, Steel Pin, Wall Mounting, Fasteners: Screws, 7 lb Load Capacity, 1-1/2 in Overall Width, Cold Rolled Steel, Dull Brass For use with ClosetMaid, SuperSlide wire shelving. Prevents hangers from sliding off end of closet hang rod. Insert into end of the hang rod.Two end caps per package. 0.5"H x 0.5"W x 0.5"D. Material: Resin.
National Hardware N146-258 Flush/Full Inset Square Corner Narrow Hinge National Hardware N141-622 Narrow Hinge HASP SAFETY ZINC PLT FN 4-1/2
NARROW HINGES 1IN BRS
Our Price: $4.33
National Hardware Narrow Hinge, Flush/Full Inset, Square Corner, Series: V518, 6 Holes, 1/4 in Hole Diameter, 0.06 in Leaf Thickness, 2-1/2 in Door Leaf Length, 2-1/2 in Frame Leaf Length, Non-Removable Pin, 0.12 in Diameter Pin, Steel Pin, Wall Mounting, Fasteners: Screws, 20 lb Load Capacity, 2-1/2 in Overall Width, Cold Rolled Steel, Zinc Plated National Hardware Narrow Hinge, Full Mortise, Series: V508, Knuckle Bearing, 4 Holes, 0.16 in Hole Diameter, 0.05 in Leaf Thickness, 1 in Door Leaf Length, 1 in Frame Leaf Length, Removable Pin, 0.1 in Diameter Pin, Wall Mounting, Fasteners: (5) Knuckle, Screws, 7 lb Load Capacity, 1 in Overall Width, Cold Rolled Steel, Brass Non- swiveling. Adds security for doors, cabinets and gates. Rust resistant.
HINGE UTILITY STEEL 3X3IN ZN  National Hardware N141-606 Narrow Hinge National Hardware N141-838 Narrow Hinge
Five knuckle full mortise design. Allows easy installation or removal of lightweight doors. Screws included. National Hardware Narrow Hinge, Full Mortise, Series: V508, Knuckle Bearing, 4 Holes, 0.16 in Hole Diameter, 0.05 in Leaf Thickness, 1 in Door Leaf Length, 1 in Frame Leaf Length, Removable Pin, 0.1 in Diameter Pin, Wall Mounting, Fasteners: (5) Knuckle, Screws, 7 lb Load Capacity, 1 in Overall Width, Cold Rolled Steel, Zinc Plated National Hardware Narrow Hinge, Full Mortise, Series: V508, Knuckle Bearing, 4 Holes, 0.23 in Hole Diameter, 0.06 in Leaf Thickness, 2 in Door Leaf Length, 2 in Frame Leaf Length, Removable Pin, 0.12 in Diameter Pin, Wall Mounting, Fasteners: (5) Knuckle, Screws, 10 lb Load Capacity, 1.56 in Overall Width, Cold Rolled Steel, Zinc Plated
Stanley 139873 Door Hinge HINGE BRD PLN STL 3-1/2IN     National Hardware N141-739 Narrow Hinge
504. Designed for general utility and industrial applications. Hinges are swaged for mortise installations. Loose pin allows doors to be removed without taking off hinges. Plain steel version can be welded. Boxed. 505. Swaged for mortise installations. Manufactured with cold rolled steel. Five knuckle, full mortise design. Riveted, non-removable pin. Boxed loose barcoded. National Hardware Narrow Hinge, Full Mortise, Series: V508, Knuckle Bearing, 4 Holes, 0.2 in Hole Diameter, 0.05 in Leaf Thickness, 1-1/2 in Door Leaf Length, 1-1/2 in Frame Leaf Length, Removable Pin, 0.11 in Diameter Pin, Wall Mounting, Fasteners: (5) Knuckle, Screws, 7 lb Load Capacity, 1.42 in Overall Width, Cold Rolled Steel, Zinc Plated
National Hardware N146-175 Flush/Full Inset Square Corner Narrow Hinge Mintcraft LR083 Bolt Hook HASP SAFETY ZINC STEEL 4-1/2IN
NARROW HINGES 2IN BRS
Our Price: $4.58
National Hardware Narrow Hinge, Flush/Full Inset, Square Corner, Series: V518, 4 Holes, 0.23 in Hole Diameter, 0.06 in Leaf Thickness, 2 in Door Leaf Length, 2 in Frame Leaf Length, Non-Removable Pin, 0.12 in Diameter Pin, Steel Pin, Wall Mounting, Fasteners: Screws, 10 lb Load Capacity, 2 in Overall Width, Cold Rolled Steel, Dull Brass Can be used with gate strap hinges to support wooden gates and fences. Can be easily adjusted. Use on cabinets, doors and gates. Mounting screws are concealed when the hasp is closed.
Stanley 130146 Screw Hook Mintcraft LR094 Screw Hook HINGE UTL SQ CNR 2-1/2X1-11/16
For use with new installations with Stanley's 130732, 131102, 248047, 131060, 130765, and 130799 hinge straps. Adjusts to correct gate sag. Easily installs into wood surfaces. Replaces worn or broken bolt hooks. Can be used with strap hinges. Lightweight steel construction. 3 Knuckles.
HINGE BRD ZINC PLATED 3IN     HINGE UTL SQ CNR 2-1/2X1-11/16 HASP SAFETY SAT BRS 2-1/2X1IN
BROAD HINGES 3IN ZN PLT
Our Price: $4.80
504. Swaged for mortise installations. Manufactured with cold rolled steel. Five knuckle, full mortise design. Loose pin allows doors to be removed without removing hinge. Boxed loose barcoded. Five knuckle full mortise design. Allows easy installation or removal of lightweight cabinet doors. Screws included. Fixed staple. Use on doors, cabinets and gates.
Closetmaid 7561 U-Shape Shelf Clip National Hardware N141-754 Narrow Hinge National Hardware 505BC Flush/Full Inset Broad Hinge
BROAD HINGES 3IN ZN PLT
Our Price: $4.88
Attaches to the back of shelving to anchor shelf to back wall. Shelf clip "locks" shelving into place - attaching it at the top and bottom of shelf wire with or instead of wall clips. For concrete/stud and drywall installation. Material: Metal. National Hardware Narrow Hinge, Full Mortise, Series: V508, Knuckle Bearing, 4 Holes, 0.2 in Hole Diameter, 0.05 in Leaf Thickness, 1-1/2 in Door Leaf Length, 1-1/2 in Frame Leaf Length, Removable Pin, 0.11 in Diameter Pin, Wall Mounting, Fasteners: (5) Knuckle, Screws, 7 lb Load Capacity, 1.42 in Overall Width, Cold Rolled Steel, Brass National Hardware Broad Hinge, Flush/Full Inset, Series: 505BC, 6 Holes, 0.08 in Leaf Thickness, 3 in Door Leaf Length, 3 in Frame Leaf Length, Riveted, Non-Removable Pin, 0.234 in Diameter Pin, Wall Mounting, 50 lb Load Capacity, 3 in Overall Width, Cold Rolled Steel, Zinc Plated, BHMA A138.18, For Mortise Installations
Hi-Security 703D High Security Latching Hasp National Hardware V30 Non-Swivel Safety Hasp Stanley 131060 Hinge Strap
High security pinless hinge. National Hardware Safety Hasp, Non-Swivel, Series: V30, 0.44 in Diameter X 0.9 in Height Shackle, 4.56 in Length, 1-1/2 in Height, Hot Rolled Steel, Brass, Includes: Rigid Non-Swivel Staple, 3-1/4 in, For Securing a Wide Variety of Doors, Cabinets, Boxes and Trunks Designed for new installations with Stanley's 130708, 130559, 130583, and 130617 hooks. Strap punched for 5/16" (6" and 8" sizes) or 3/8" (10", 12", 14", 16" 18", 20" and 24" sizes) bolts.
Hi-Security 704D High Security Latching Hasp National Hardware N141-945 Narrow Hinge Stanley 131227 Hinge Screw Eye
High security pinless hinge. National Hardware Narrow Hinge, Full Mortise, Series: V508, Knuckle Bearing, 6 Holes, 0.23 in Hole Diameter, 0.06 in Leaf Thickness, 2-1/2 in Door Leaf Length, 2-1/2 in Frame Leaf Length, Removable Pin, 0.12 in Diameter Pin, Wall Mounting, Fasteners: (5) Knuckle, Screws, 20 lb Load Capacity, 1.68 in Overall Width, Cold Rolled Steel, Zinc Plated To be used in wood gate applications in conjunction with screw hooks, bolt hooks and pintles.
Closetmaid 26607 Support Bracket National Hardware V30 Non-Swivel Safety Hasp HASP SAFETY GALV 3-1/2IN
Preloaded with #8 pin drive and anchors. No.6606, 71925 and No. 21775. - For Organizer, Wardrobe, SuperSlide and Close Mesh Shelves 12" in depth; and Wardrobe or hanging SuperSlide shelves 16" in depth. No. 26607, 71924, and No.21776 - For Organizer, SuperSlide (in storage application), and Close Mesh shelves 16" in depth. No.26605 - For Organizer, Wardrobe, SuperSlide and Close Mesh Shelves 20" in depth. National Hardware Safety Hasp, Non-Swivel, Series: V30, 0.44 in Diameter X 0.9 in Height Shackle, 5.68 in Length, 1-1/2 in Height, Hot Rolled Steel, Zinc Plated, Includes: Rigid Non-Swivel Staple, BHMA A138.18 Certified, 4-1/2 in, For Securing a Wide Variety of Doors, Cabinets, Boxes and Trunks Non- swiveling. Adds security for doors, cabinets and gates. Rust resistant.
National Hardware V30 Corrosion Resistant Safety Hasp National Hardware N146-373 Flush/Full Inset Square Corner Narrow Hinge National Hardware N146-290 Flush/Full Inset Square Corner Narrow Hinge
National Hardware Safety Hasp, Corrosion Resistant, Series: V30, 0.44 in Diameter Shackle, 4.56 in Length, 1-1/2 in Height, Hot Rolled Steel, Black, Includes: Rigid Non-Swivel Staple, For Doors, Cabinets, Boxes and Trunks National Hardware Narrow Hinge, Flush/Full Inset, Square Corner, Series: V518, 6 Holes, 1/4 in Hole Diameter, 0.07 in Leaf Thickness, 3 in Door Leaf Length, 3 in Frame Leaf Length, Non-Removable Pin, 0.16 in Diameter Pin, Steel Pin, Wall Mounting, Fasteners: Screws, 28 lb Load Capacity, 3 in Overall Width, Cold Rolled Steel, Zinc Plated National Hardware Narrow Hinge, Flush/Full Inset, Square Corner, Series: V518, 6 Holes, 1/4 in Hole Diameter, 0.06 in Leaf Thickness, 2-1/2 in Door Leaf Length, 2-1/2 in Frame Leaf Length, Non-Removable Pin, 0.12 in Diameter Pin, Steel Pin, Wall Mounting, Fasteners: Screws, 20 lb Load Capacity, 2-1/2 in Overall Width, Cold Rolled Steel, Brass
HASP SAFETY GALV 4-1/2IN      HINGE UTL STL GALV 3X3IN      Closetmaid 7546 Down Clip/Anchor
Non- swiveling. Adds security for doors, cabinets and gates. Rust resistant. Five knuckle full mortise design. Allows easy installation or removal of lightweight doors. Screws included. Attaches to the back of shelving to anchor shelf to back wall. For concrete/stud and drywall installation. Package includes 12 clips, 12 anchors and 12 #8 screws.
National Hardware N141-879 Narrow Hinge HINGE UTILITY STL 3-1/2X3-1/2 HASP SAFETY 3-1/2IN ZINC STL
NARROW HINGES 2IN BRS
Our Price: $5.51
National Hardware Narrow Hinge, Full Mortise, Series: V508, Knuckle Bearing, 4 Holes, 0.23 in Hole Diameter, 0.06 in Leaf Thickness, 2 in Door Leaf Length, 2 in Frame Leaf Length, Removable Pin, 0.12 in Diameter Pin, Wall Mounting, Fasteners: (5) Knuckle, Screws, 10 lb Load Capacity, 1.56 in Overall Width, Cold Rolled Steel, Brass Five knuckle full mortise design. Allows easy installation or removal of lightweight doors. Screws included. Latches without a padlock. All screws are  concealed when locked for added security.
HASP SAFETY 4-1/2IN ZINC STL  HINGE BRD ZINC PLATED 3-1/2IN Stanley 131102 Hinge Strap
Latches without a padlock. All screws are  concealed when locked for added security. 504. Swaged for mortise installations. Manufactured with cold rolled steel. Five knuckle, full mortise design. Loose pin allows doors to be removed without removing hinge. Boxed loose barcoded. Designed for new installations with Stanley's 130708, 130559, 130583, and 130617 hooks. Strap punched for 5/16" (6" and 8" sizes) or 3/8" (10", 12", 14", 16" 18", 20" and 24" sizes) bolts.
National Hardware 505BC Flush/Full Inset Broad Hinge Stanley 130559 Full Threaded Bolt Hook National Hardware N141-960 Narrow Hinge
National Hardware Broad Hinge, Flush/Full Inset, Series: 505BC, 6 Holes, 0.23 in Hole Diameter, 0.11 in Leaf Thickness, 3-1/2 in Door Leaf Length, 3-1/2 in Frame Leaf Length, Riveted, Non-Removable Pin, 0.27 in Diameter Pin, Wall Mounting, 70 lb Load Capacity, 3.62 in Overall Length, 3-1/2 in Overall Width, Cold Rolled Steel, Zinc Plated Adjust to correct gate sag. Includes 2 washers and 2 nuts per hook. Full threaded hook is bolted through the post and firmly secured with standard size nuts and washers on each side. As a replacement part: use with National's 292 Bold Hook. For new installations: use with National's #294 Hinge Straps. Use with the Stanley/National Strap size 14"(N130-799), 16"(N168-336), and the 18"(N248-039). National Hardware Narrow Hinge, Full Mortise, Series: V508, Knuckle Bearing, 6 Holes, 0.23 in Hole Diameter, 0.06 in Leaf Thickness, 2-1/2 in Door Leaf Length, 2-1/2 in Frame Leaf Length, Removable Pin, 0.12 in Diameter Pin, Wall Mounting, Fasteners: (5) Knuckle, Screws, 20 lb Load Capacity, 1.68 in Overall Width, Cold Rolled Steel, Brass
Mintcraft LR095 Screw Hook Closetmaid 7540 Small End Cap HASP SAFETY ZINC PLT FN 6IN
Easily installs into wood surfaces. Replaces worn or broken bolt hooks. Can be used with strap hinges. Vinyl end cap provides protection from cut end of wire shelving that exposes possible rough edges. Large end caps cover the large rod, 0 gauge, .25"H x .4"W x .4"D. Small end caps are for the 4 gauge wire, .2"H x .2"W x .2"D. Designed to be used with ClosetMaid - Shelf & Rod shelving. Non- swiveling. Adds security for doors, cabinets and gates. Rust resistant.
HINGE UTL SQ CNR ZN PLT 3X2IN National Hardware N142-034 Narrow Hinge National Hardware N146-399 Flush/Full Inset Square Corner Narrow Hinge
NARROW HINGES 3IN BRS
Our Price: $6.20
Five knuckle full mortise design. Allows easy installation or removal of lightweight cabinet doors. Screws included. National Hardware Narrow Hinge, Full Mortise, Series: V508, Knuckle Bearing, 6 Holes, 1/4 in Hole Diameter, 0.07 in Leaf Thickness, 3 in Door Leaf Length, 3 in Frame Leaf Length, Removable Pin, 0.16 in Diameter Pin, Wall Mounting, Fasteners: (5) Knuckle, Screws, 28 lb Load Capacity, 2.06 in Overall Width, Cold Rolled Steel, Zinc Plated National Hardware Narrow Hinge, Flush/Full Inset, Square Corner, Series: V518, 6 Holes, 1/4 in Hole Diameter, 0.07 in Leaf Thickness, 3 in Door Leaf Length, 3 in Frame Leaf Length, Non-Removable Pin, 0.16 in Diameter Pin, Steel Pin, Wall Mounting, Fasteners: Screws, 28 lb Load Capacity, 3 in Overall Width, Cold Rolled Steel, Brass
Stanley 139998 Door Hinge HINGE BRD PLN STL 4IN         Closetmaid 26605 Support Bracket
504. Designed for general utility and industrial applications. Hinges are swaged for mortise installations. Loose pin allows doors to be removed without taking off hinges. Plain steel version can be welded. Boxed. 505. Swaged for mortise installations. Manufactured with cold rolled steel. Five knuckle, full mortise design. Riveted, non-removable pin. Boxed loose barcoded. Preloaded with #8 pin drive and anchors. No.6606, 71925 and No. 21775. - For Organizer, Wardrobe, SuperSlide and Close Mesh Shelves 12" in depth; and Wardrobe or hanging SuperSlide shelves 16" in depth. No. 26607, 71924, and No.21776 - For Organizer, SuperSlide (in storage application), and Close Mesh shelves 16" in depth. No.26605 - For Organizer, Wardrobe, SuperSlide and Close Mesh Shelves 20" in depth.
National Hardware 505BC Flush/Full Inset Broad Hinge HINGE BRD ZINC PLATED 4IN     National Hardware N142-067 Narrow Hinge
BROAD HINGES 4IN ZN PLT
Our Price: $6.46
BROAD HINGES 4IN ZN PLT
Our Price: $6.49
NARROW HINGES 3IN BRS
Our Price: $6.53
National Hardware Broad Hinge, Flush/Full Inset, Series: 505BC, 8 Holes, 0.29 in Hole Diameter, 0.11 in Leaf Thickness, 4 in Door Leaf Length, 4 in Frame Leaf Length, Riveted, Non-Removable Pin, 0.27 in Diameter Pin, Wall Mounting, 70 lb Load Capacity, 4.14 in Overall Length, 4 in Overall Width, Cold Rolled Steel, Zinc Plated, BHMA A138.18 504. Swaged for mortise installations. Manufactured with cold rolled steel. Five knuckle, full mortise design. Loose pin allows doors to be removed without removing hinge. Boxed loose barcoded. National Hardware Narrow Hinge, Full Mortise, Series: V508, Knuckle Bearing, 6 Holes, 1/4 in Hole Diameter, 0.07 in Leaf Thickness, 3 in Door Leaf Length, 3 in Frame Leaf Length, Removable Pin, 0.16 in Diameter Pin, Wall Mounting, Fasteners: (5) Knuckle, Screws, 28 lb Load Capacity, 2.06 in Overall Width, Cold Rolled Steel, Brass
National Hardware V30 Corrosion Resistant Safety Hasp HASP SAFETY 6IN SWVL ZINC STL Mintcraft LR085 Bolt Hook
National Hardware Safety Hasp, Corrosion Resistant, Series: V30, 0.44 in Diameter Shackle, 5.68 in Length, 1-1/2 in Height, Hot Rolled Steel, Black, Includes: Rigid Non-Swivel Staple, For Doors, Cabinets, Boxes and Trunks Latches without a padlock. All screws are  concealed when locked for added security. Can be used with gate strap hinges to support wooden gates and fences. Can be easily adjusted.
Closetmaid 6606 Support Bracket HINGE UTL GALV 3-1/2X3-1/2IN  National Hardware N348-979 Decorative Narrow Narrow Hinge
Preloaded with #8 pin drive and anchors. No.6606, 71925 and No. 21775. - For Organizer, Wardrobe, SuperSlide and Close Mesh Shelves 12" in depth; and Wardrobe or hanging SuperSlide shelves 16" in depth. No. 26607, 71924, and No.21776 - For Organizer, SuperSlide (in storage application), and Close Mesh shelves 16" in depth. No.26605 - For Organizer, Wardrobe, SuperSlide and Close Mesh Shelves 20" in depth. Five knuckle full mortise design. Allows easy installation or removal of lightweight doors. Screws included. National Hardware Narrow Hinge, Decorative, Narrow, Series: V519, 4 Holes, Non-Removable Pin, 7 lb Load Capacity, 1-1/2 in Overall Width, Stainless Steel, Stainless Steel, BHMA A138.18, For Lightweight Doors, Chests and Cabinets
National Hardware V30 Non-Swivel Safety Hasp National Hardware V32 Swivel Staple Safety Hasp HINGE UTILITY STEEL 4X4IN ZN
SAFETY HASPS 6IN ZN PLT
Our Price: $7.07
National Hardware Safety Hasp, Non-Swivel, Series: V30, 0.44 in Diameter X 0.9 in Height Shackle, 8.68 in Length, 1-3/4 in Height, Hot Rolled Steel, Zinc Plated, Includes: Rigid Non-Swivel Staple, BHMA A138.18 Certified, 6 in, For Securing a Wide Variety of Doors, Cabinets, Boxes and Trunks National Hardware Safety Hasp, Swivel Staple, Series: V32, 0.41 in Diameter X 1.2 in Height Shackle, 4.48 in Length, 1-1/2 in Height, Hot Rolled Steel, Aluminum Pin, Zinc Plated, BHMA A138.18 Certified, 3-1/4 in, For Securing a Wide Variety of Doors, Cabinets, Boxes and Trunks Five knuckle full mortise design. Allows easy installation or removal of lightweight doors. Screws included.
National Hardware V504 Broad Hinge Stanley 130179 Screw Hook HINGE UTILITY SQ CNR GALV 4X4
BROAD HINGES 4IN ZN PLT
Our Price: $7.36
National Hardware Broad Hinge, Full Mortise, Series: V504, Knuckle Bearing, 8 Holes, 0.29 in Hole Diameter, 0.11 in Leaf Thickness, 4 in Door Leaf Length, 4 in Frame Leaf Length, Removable Pin, 0.27 in Diameter Pin, Brass Pin, Wall Mounting, Fasteners: (5) Knuckle, Screws, 70 lb Load Capacity, 4 in Overall Width, Cold Rolled Steel, Zinc Plated For use with new installations with Stanley's 130732, 131102, 248047, 131060, 130765, and 130799 hinge straps. Adjusts to correct gate sag. Five knuckle full mortise design. Allows easy installation or removal of lightweight doors. Screws included.
HOOK SCREW/HINGE STRAP 6IN    HASP SAFETY GLV 4-1/2INX1-1/2 National Hardware V32 Swivel Staple Safety Hasp
Replaces worn or broken bolt hooks.  Can be used with strap hinges For both indoor and outdoor use. Rust resistant. National Hardware Safety Hasp, Swivel Staple, Series: V32, 0.41 in Diameter X 1.2 in Height Shackle, 5.61 in Length, 1-1/2 in Height, Hot Rolled Steel, Aluminum Pin, Zinc Plated, BHMA A138.18 Certified, 4-1/2 in, For Securing a Wide Variety of Doors, Cabinets, Boxes and Trunks
Stanley 131375 Pintle SuperSlide 25633 Corner Corner Round Bar HASP SAFETY GALV 2-1/2IN
Designed for use with Stanley's 130732, 131102, 248047, 131060, 248039, 130765, 168336, and 130799 hinge straps. Gate can be easily lifted off of pintle. Designed for heavy-duty gates and doors. Pintle punched for 5/16" (1/2" size) or 3/8" (5/8" size) bolts. Use with SuperSlide shelving to create uninterrupted sliding action around corners for walk-in closets. Tapered ends slide easily into ClosetMaid, SuperSlide hang rods. Support connection of hang rod with a Hang Bar Support. 0.75?H x 10.25?W x 10.25?DMaterial: Epoxy coated steel. Designed to secure a wide variety of doors, cabinets, boxes, trunks, etc. For security, all screws are concealed when hasp is closed. Ribbed design for extra strength. Includes rigid non-swivel staple. Visual-pack.
HOOK SCREW/HINGE STRAP 8IN    HINGE UTL SQ CNR ZN STL 5X5IN National Hardware N348-987 Decorative Narrow Narrow Hinge
NARROW HINGES 2IN SS
Our Price: $8.00
Replaces worn or broken bolt hooks.  Can be used with strap hinges Five knuckle full mortise design. Allows easy installation or removal of lightweight doors. Screws included. National Hardware Narrow Hinge, Decorative, Narrow, Series: V519, 4 Holes, Non-Removable Pin, 10 lb Load Capacity, 2 in Overall Width, Stainless Steel, Stainless Steel, BHMA A138.18, For Lightweight Doors, Chests and Cabinets
Stanley 130732 Hinge Strap National Hardware V30 Non-Swivel Safety Hasp National Hardware V32 Corrosion Resistant Swivel Staple Safety Hasp
Designed for new installations with Stanley's 130708, 130559, 130583, and 130617 hooks. Strap punched for 5/16" (6" and 8" sizes) or 3/8" (10", 12", 14", 16" 18", 20" and 24" sizes) bolts. National Hardware Safety Hasp, Non-Swivel, Series: V30, 0.44 in Diameter X 0.9 in Height Shackle, 4.56 in Length, 1-1/2 in Height, Hot Rolled Steel, Stainless Steel Pin, Galvanized, Includes: Rigid Non-Swivel Staple, BHMA A138.18 Certified, 3-1/4 in, For Securing a Wide Variety of Doors, Cabinets, Boxes and Trunks National Hardware Swivel Staple Safety Hasp, Corrosion Resistant, Series: V32, 0.41 in Diameter Shackle, 4.48 in Length, 1-1/2 in Height, Hot Rolled Steel, Black, Includes: Fasteners, For Doors, Cabinets, Boxes and Trunks
National Hardware V30 Non-Swivel Safety Hasp National Hardware V37 Weather Resistant Safety Hasp Stanley 130617 Full Threaded Bolt Hook
SAFETY HASPS 3-1/4IN SS
Our Price: $8.41
National Hardware Safety Hasp, Non-Swivel, Series: V30, 0.44 in Diameter X 0.9 in Height Shackle, 5.68 in Length, 1-1/2 in Height, Hot Rolled Steel, Stainless Steel Pin, Galvanized, Includes: Rigid Non-Swivel Staple, BHMA A138.18 Certified, 4-1/2 in, For Securing a Wide Variety of Doors, Cabinets, Boxes and Trunks National Hardware Safety Hasp, Weather Resistant, Series: V37, 9/32 in Diameter Shackle, 3-1/4 in Length, Stainless Steel, BHMA A138.18 Certified, For Boxes, Chests and Cabinets Adjust to correct gate sag. Includes 2 washers and 2 nuts per hook. Full threaded hook is bolted through the post and firmly secured with standard size nuts and washers on each side. As a replacement part: use with National's 292 Bold Hook. For new installations: use with National's #294 Hinge Straps. Use with the Stanley/National Strap size 14"(N130-799), 16"(N168-336), and the 18"(N248-039).
National Hardware V32 Corrosion Resistant Swivel Staple Safety Hasp National Hardware N195-644 Broad Hinge HINGE UTILITY 4-1/2INX4-1/2IN
National Hardware Swivel Staple Safety Hasp, Corrosion Resistant, Series: V32, 0.41 in Diameter Shackle, 5.61 in Length, 1-1/2 in Height, Hot Rolled Steel, Black, Includes: Fasteners, For Doors, Cabinets, Boxes and Trunks National Hardware Broad Hinge, Full Mortise, Series: V504, Knuckle Bearing, 6 Holes, 0.077 in Leaf Thickness, 2-1/2 in Door Leaf Length, 2-1/2 in Frame Leaf Length, Removable Pin, Brass Pin, Wall Mounting, Fasteners: (5) Knuckle, Screws, 43 lb Load Capacity, 2-1/2 in Overall Width, Cold Rolled Steel, Zinc Plated, BHMA A138.18 Five knuckle full mortise design. Allows easy installation or removal of lightweight doors. Screws included.
Stanley 130765 Hinge Strap Stanley 131409 Pintle Mintcraft LR096 Screw Hook
Designed for new installations with Stanley's 130708, 130559, 130583, and 130617 hooks. Strap punched for 5/16" (6" and 8" sizes) or 3/8" (10", 12", 14", 16" 18", 20" and 24" sizes) bolts. Designed for use with Stanley's 130732, 131102, 248047, 131060, 248039, 130765, 168336, and 130799 hinge straps. Gate can be easily lifted off of pintle. Designed for heavy-duty gates and doors. Pintle punched for 5/16" (1/2" size) or 3/8" (5/8" size) bolts. Easily installs into wood surfaces. Replaces worn or broken bolt hooks. Can be used with strap hinges.
HASP SAFETY ZN STL 6X1-3/4IN  National Hardware V32 Swivel Staple Safety Hasp Mintcraft LR084 Bolt Hook
SAFETY HASPS 6IN ZN PLT
Our Price: $9.18
Screws are concealed when hasp is locked. Rust resistant. Zinc plated. Adjustable staple. National Hardware Safety Hasp, Swivel Staple, Series: V32, 0.41 in Diameter X 1.2 in Height Shackle, 8.62 in Length, 1-3/4 in Height, Hot Rolled Steel, Aluminum Pin, Zinc Plated, BHMA A138.18 Certified, 6 in, For Securing a Wide Variety of Doors, Cabinets, Boxes and Trunks Can be used with gate strap hinges to support wooden gates and fences. Can be easily adjusted.
HASP SAFETY GALV STL 6 INCH   SuperSlide 2058 Closet Rod National Hardware N195-651 Broad Hinge
BROAD HINGES 3IN ZN PLT
Our Price: $9.68
Non- swiveling. Adds security for doors, cabinets and gates. Rust resistant. Snaps into the Closet Rod Support to allow hangers to slide without interruption. Can be cut to customize length . Holds up to 30lbs per foot. Material: Epoxy coated steel. National Hardware Broad Hinge, Full Mortise, Series: V504, Knuckle Bearing, 6 Holes, 0.08 in Leaf Thickness, 3 in Door Leaf Length, 3 in Frame Leaf Length, Removable Pin, Brass Pin, Wall Mounting, Fasteners: (5) Knuckle, Screws, 50 lb Load Capacity, 3 in Overall Width, Cold Rolled Steel, Zinc Plated, BHMA A138.18, For Residential Applications
Stanley 130799 Hinge Strap Stanley 130203 Screw Hook Stanley 130583 Full Threaded Bolt Hook
Designed for new installations with Stanley's 130708, 130559, 130583, and 130617 hooks. Strap punched for 5/16" (6" and 8" sizes) or 3/8" (10", 12", 14", 16" 18", 20" and 24" sizes) bolts. For use with new installations with Stanley's 130732, 131102, 248047, 131060, 130765, and 130799 hinge straps. Adjusts to correct gate sag. Adjust to correct gate sag. Includes 2 washers and 2 nuts per hook. Full threaded hook is bolted through the post and firmly secured with standard size nuts and washers on each side. As a replacement part: use with National's 292 Bold Hook. For new installations: use with National's #294 Hinge Straps. Use with the Stanley/National Strap size 14"(N130-799), 16"(N168-336), and the 18"(N248-039).
Mintcraft LR086 Bolt Hook National Hardware V37 Weather Resistant Safety Hasp National Hardware V519 Decorative Narrow Narrow Hinge
SAFETY HASPS 4-1/2IN SS
Our Price: $10.10
NARROW HINGES 3IN SS
Our Price: $10.16
Can be used with gate strap hinges to support wooden gates and fences. Can be easily adjusted. National Hardware Safety Hasp, Weather Resistant, Series: V37, 9/32 in Diameter Shackle, 4-1/2 in Length, Stainless Steel, BHMA A138.18 Certified, For Boxes, Chests and Cabinets National Hardware Narrow Hinge, Decorative, Narrow, Series: V519, 6 Holes, Non-Removable Pin, 28 lb Load Capacity, 3 in Overall Width, Stainless Steel, Stainless Steel, BHMA A138.18, For Lightweight Doors, Chests and Cabinets
HASP SAFETY GALV 3-1/4IN      National Hardware V30 Non-Swivel Safety Hasp HOOK SCREW/HINGE STRAP 10IN
SAFETY HASPS 3-1/4IN GALV
Our Price: $10.32
SAFETY HASPS 6IN GALV
Our Price: $10.32
Stanley Swivel Staple Safety Hasp, Series: V32, 1 Locking Holes, 3-1/4 in Length, 1-1/2 in Width, Steel, Galvanized, For Securing a Wide Variety of Doors, Cabinets, Boxes and Trunks National Hardware Safety Hasp, Non-Swivel, Series: V30, 8.68 in Length, 1-3/4 in Height, Hot Rolled Steel, Galvanized, Includes: Rigid Non-Swivel Staple, BHMA A138.18 Certified, 6 in, For Securing a Wide Variety of Doors, Cabinets, Boxes and Trunks Replaces worn or broken bolt hooks.  Can be used with strap hinges
National Hardware V32 Swivel Staple Safety Hasp National Hardware N195-669 Broad Hinge HINGE BRD PLN STL 4-1/2IN
SAFETY HASPS 4-1/2IN GALV
Our Price: $10.68
National Hardware Safety Hasp, Swivel Staple, Series: V32, 0.41 in Diameter X 1.2 in Height Shackle, 5.61 in Length, 1-1/2 in Height, Hot Rolled Steel, Brass Pin, Galvanized, BHMA A138.18 Certified, 4-1/2 in, For Securing a Wide Variety of Doors, Cabinets, Boxes and Trunks National Hardware Broad Hinge, Full Mortise, Series: V504, Knuckle Bearing, 6 Holes, 0.23 in Hole Diameter, 0.11 in Leaf Thickness, 3-1/2 in Door Leaf Length, 3-1/2 in Frame Leaf Length, Removable Pin, 0.27 in Diameter Pin, Brass Pin, Wall Mounting, Fasteners: (5) Knuckle, Screws, 70 lb Load Capacity, 3-1/2 in Overall Width, Cold Rolled Steel National Hardware Broad Hinge, Series: 504BC, Full Mortise, 8 Holes, 0.34 in Hole Diameter, 0.13 in Leaf Thickness, Removable, Loose Pin, 0.27 in Dia Pin, Fasteners: 5-Knuckle, 90 lb Load Capacity, 4-1/2 in Overall Length, 4-1/2 in Overall Width, Cold Rolled Steel, Plain
National Hardware V514 Square Corner Door Hinge Closetmaid 7556 U Clip Master Lock 706D High Security Hasp
DOOR HINGES 1-1/2IN SS
Our Price: $11.21
National Hardware Door Hinge, Full Mortise, Square Corner, Series: V514, Knuckle Bearing, 4 Holes, 1-1/2 in Door Leaf Length, 1-1/2 in Frame Leaf Length, Non-Rising, Removable Pin, Wall Mounting, Fasteners: (5) Knuckles, NO 9 Flat Head Screws, 10 lb Load Capacity, 1-1/2 in Overall Width, Stainless Steel, Stainless Steel, BHMA A138.18 Attaches to the back of shelving to anchor shelf to back wall. Shelf clip "locks" shelving into place - attaching it at the top and bottom of shelf wire with or instead of wall clips. For concrete/stud and drywall installation. Material: Metal. High security pinless hinge.
Stanley 130641 Full Threaded Bolt Hook National Hardware V514 Square Corner Door Hinge HOOK SCREW/HINGE STRAP 12IN
DOOR HINGES 2IN SS
Our Price: $11.74
Adjust to correct gate sag. Includes 2 washers and 2 nuts per hook. Full threaded hook is bolted through the post and firmly secured with standard size nuts and washers on each side. As a replacement part: use with National's 292 Bold Hook. For new installations: use with National's #294 Hinge Straps. Use with the Stanley/National Strap size 14"(N130-799), 16"(N168-336), and the 18"(N248-039). National Hardware Door Hinge, Full Mortise, Square Corner, Series: V514, Knuckle Bearing, 4 Holes, 0.21 in Hole Diameter, 0.08 in Leaf Thickness, 2 in Door Leaf Length, 2 in Frame Leaf Length, Non-Rising, Removable Pin, 0.19 in Diameter Pin, Wall Mounting, Fasteners: (5) Knuckles, NO 9 Flat Head Screws, 15 lb Load Capacity, 2 in Overall Width Replaces worn or broken bolt hooks.  Can be used with strap hinges
Master Lock 730DPF Straight Bar Safety Hasp National Hardware 505BC Flush/Full Inset Broad Hinge Stanley 168336 Hinge Strap
Zinc plated hardened steel for added strength and weatherability. Hardened steel staple resists cutting, sawing and hammering. Hasp body conceals mounting hardware. Use for securing utility vans, trailers, gang boxes, and vending machines.  Accepts shackle diameter up to 7/16". National Hardware Broad Hinge, Flush/Full Inset, Series: 505BC, 8 Holes, 4-1/2 in Door Leaf Length, 4-1/2 in Frame Leaf Length, Riveted, Non-Removable Pin, Wall Mounting, 90 lb Load Capacity, 4-1/2 in Overall Width, Cold Rolled Steel, Zinc Plated, BHMA A138.18, For Mortise Installations Designed for new installations with Stanley's 130708, 130559, 130583, and 130617 hooks. Strap punched for 5/16" (6" and 8" sizes) or 3/8" (10", 12", 14", 16" 18", 20" and 24" sizes) bolts.
HINGE S-H/STRP ZINC PLTD 6IN  Stanley 130674 Full Threaded Bolt Hook Closetmaid 1770 Back Wall Clip
Boxed loose barcoded. Adjust to correct gate sag. Includes 2 washers and 2 nuts per hook. Full threaded hook is bolted through the post and firmly secured with standard size nuts and washers on each side. As a replacement part: use with National's 292 Bold Hook. For new installations: use with National's #294 Hinge Straps. Use with the Stanley/National Strap size 14"(N130-799), 16"(N168-336), and the 18"(N248-039). Anchors shelf to wall. Ensures stability of shelf.
SuperSlide 1741 Wall Bracket Closetmaid 21782 Shelf End Wall Bracket HINGE S-H/STRP ZINC PLTD 8IN
Supports low profile SuperSlide shelving in a wall to wall installation. Includes: 2 wall brackets, 4 pins and 4 anchors. Use in conjunction with support brackets and wall clips for installing wire shelving. Suports front lip of shelving where it meets the side wall. 2"H x 2.19W x 1.75"D. Material: Resin Heavy duty preloaded bracket with anchor easily mounts to the wall and holds the end of any size ClosetMaid shelf. Provides side wall support. Supports front lip of shelving where it meets the side wall. For drywall installations. Includes: 2.875"H x 2.125"W x 1.75"D. Material: Resin. Boxed loose barcoded.
National Hardware V514 Square Corner Door Hinge National Hardware V39 Weather Resistant Swivel Staple Safety Hasp National Hardware V514 Square Corner Door Hinge
DOOR HINGES 2-1/2IN SS
Our Price: $14.22
SAFETY HASPS 3-1/4IN SS
Our Price: $14.58
DOOR HINGES 3IN SS
Our Price: $15.36
National Hardware Door Hinge, Full Mortise, Square Corner, Series: V514, Knuckle Bearing, 6 Holes, 1/4 in Hole Diameter, 0.08 in Leaf Thickness, 2-1/2 in Door Leaf Length, 2-1/2 in Frame Leaf Length, Non-Rising, Removable Pin, 0.212 in Diameter Pin, Wall Mounting, Fasteners: (5) Knuckles, NO 9 Flat Head Screws, 35 lb Load Capacity, Stainless Steel National Hardware Swivel Staple Safety Hasp, Weather Resistant, Series: V39, 3-1/4 in Length, Stainless Steel, BHMA A138.18 Certified, For Doors, Cabinets, Boxes and Trunks National Hardware Door Hinge, Full Mortise, Square Corner, Series: V514, Knuckle Bearing, 6 Holes, 3 in Door Leaf Length, 3 in Frame Leaf Length, Non-Rising, Removable Pin, Wall Mounting, Fasteners: (5) Knuckles, NO 9 Flat Head Screws, 50 lb Load Capacity, 3 in Overall Width, Stainless Steel, Stainless Steel, BHMA A138.18
National Hardware V39 Weather Resistant Swivel Staple Safety Hasp Stanley 248039 Hinge Strap Closetmaid 1009 Shelf Support Pole
SAFETY HASPS 4-1/2IN SS
Our Price: $15.66
National Hardware Swivel Staple Safety Hasp, Weather Resistant, Series: V39, 4-1/2 in Length, Stainless Steel, BHMA A138.18 Certified, For Doors, Cabinets, Boxes and Trunks Designed for new installations with Stanley's 130708, 130559, 130583, and 130617 hooks. Strap punched for 5/16" (6" and 8" sizes) or 3/8" (10", 12", 14", 16" 18", 20" and 24" sizes) bolts. Use in place of support brackets when stacking 2 or more shelves. Pre-drilled holes for easy shelf location. Includes: 2 pole pieces (43 in. each) 1 pole joiner, 2 pole caps, and hardware. Material: Epoxy coated steel.
Stanley 130708 Full Threaded Bolt Hook National Hardware N208-835 Broad Hinge HINGE BRD ZINC PLATED 5IN
BROAD HINGES 3IN GALV
Our Price: $17.62
BROAD HINGES 5IN ZN PLT
Our Price: $19.14
Adjust to correct gate sag. Includes 2 washers and 2 nuts per hook. Full threaded hook is bolted through the post and firmly secured with standard size nuts and washers on each side. As a replacement part: use with National's 292 Bold Hook. For new installations: use with National's #294 Hinge Straps. Use with the Stanley/National Strap size 14"(N130-799), 16"(N168-336), and the 18"(N248-039). National Hardware Broad Hinge, Full Mortise, Series: V504, Knuckle Bearing, 6 Holes, 3 in Door Leaf Length, 3 in Frame Leaf Length, Removable Pin, Brass Pin, Wall Mounting, Fasteners: (5) Knuckle, Screws, 50 lb Load Capacity, 3 in Overall Width, Cold Rolled Steel, Galvanized, BHMA A138.18, For Residential Applications National Hardware Door Hinge, Series: 505BC, Full Mortise, 8 Holes, 0.26 in Hole Diameter, 0.15 in Leaf Thickness, Non-Removable, Riveted Pin, 0.29 in Dia Pin, Fasteners: 5-Knuckle, 110 lb Load Capacity, 5 in Overall Length, 5.11 in Overall Width, Cold Rolled Steel, Zinc Plated, Standards: BHMA A138.18
HINGE S-H/STRP ZINC PLTD 10IN National Hardware N208-843 Broad Hinge National Hardware V30 Non-Swivel Safety Hasp
BROAD HINGES 3-1/2IN GALV
Our Price: $19.82
SAFETY HASPS 7IN ZN PLT
Our Price: $20.38
Boxed loose barcoded. National Hardware Broad Hinge, Full Mortise, Series: V504, Knuckle Bearing, 6 Holes, 3-1/2 in Door Leaf Length, 3-1/2 in Frame Leaf Length, Removable Pin, Brass Pin, Wall Mounting, Fasteners: (5) Knuckle, Screws, 70 lb Load Capacity, 3-1/2 in Overall Width, Cold Rolled Steel, Galvanized, BHMA A138.18, For Residential Applications National Hardware Safety Hasp, Non-Swivel, Series: V30, 0.85 in Diameter X 1.43 in Height Shackle, 9.81 in Length, 2-1/2 in Height, Hot Rolled Steel, Zinc Plated, Includes: Rigid Non-Swivel Staple, BHMA A138.18 Certified, 7 in, For Securing a Wide Variety of Doors, Cabinets, Boxes and Trunks
HINGE S-H/STRP ZINC PLTD 12IN Stanley 248047 Hinge Strap Knape & Vogt 1980 Pre-Finished All Purpose Shelf Board
Boxed loose barcoded. Designed for new installations with Stanley's 130708, 130559, 130583, and 130617 hooks. Strap punched for 5/16" (6" and 8" sizes) or 3/8" (10", 12", 14", 16" 18", 20" and 24" sizes) bolts. Made of 5/8" thick particleboard. Simulated woodgrain finish is produced by an exacting photo-processing technique. Includes precision edge banding. Holds up to 200 Lbs.
Knape & Vogt 1980 Pre-Finished All Purpose Shelf Board Knape & Vogt 1980 ESP 8X24 Decorative Regular Duty Shelf Board ShelfTrack 21775 Shelf Bracket
Made of 5/8" thick particleboard. Simulated woodgrain finish is produced by an exacting photo-processing technique. Includes precision edge banding. Holds up to 200 Lbs. Made of 5/8" thick particleboard. Simulated woodgrain finish is produced by an exacting photo-processing technique. Includes precision edge banding. Holds up to 200 Lbs. Preloaded with #8 pin drive and anchors. No.6606, 71925 and No. 21775. - For Organizer, Wardrobe, SuperSlide and Close Mesh Shelves 12" in depth; and Wardrobe or hanging SuperSlide shelves 16" in depth. No. 26607, 71924, and No.21776 - For Organizer, SuperSlide (in storage application), and Close Mesh shelves 16" in depth. No.26605 - For Organizer, Wardrobe, SuperSlide and Close Mesh Shelves 20" in depth.
Knape & Vogt 1980 Decorative Regular Duty Prefinished Shelf Board Knape & Vogt 1980WH Regular Duty Prefinished Shelf Board Knape & Vogt 1980 ESP 10X24 Decorative Regular Duty Shelf Board
Made of 5/8" thick particleboard. Simulated woodgrain finish is produced by an exacting photo-processing technique. Includes precision edge banding. Holds up to 200 Lbs. Made of 5/8" thick particleboard. Simulated woodgrain finish is produced by an exacting photo-processing technique. Includes precision edge banding. Holds up to 200 Lbs. Made of 5/8" thick particleboard. Simulated woodgrain finish is produced by an exacting photo-processing technique. Includes precision edge banding. Holds up to 200 Lbs.
ShelfTrack 21776 Shelf Bracket Knape & Vogt 1980 Decorative Regular Duty Prefinished Shelf Board Knape & Vogt 1980 Decorative Regular Duty Prefinished Shelf Board
Preloaded with #8 pin drive and anchors. No.6606, 71925 and No. 21775. - For Organizer, Wardrobe, SuperSlide and Close Mesh Shelves 12" in depth; and Wardrobe or hanging SuperSlide shelves 16" in depth. No. 26607, 71924, and No.21776 - For Organizer, SuperSlide (in storage application), and Close Mesh shelves 16" in depth. No.26605 - For Organizer, Wardrobe, SuperSlide and Close Mesh Shelves 20" in depth. Made of 5/8" thick particleboard. Simulated woodgrain finish is produced by an exacting photo-processing technique. Includes precision edge banding. Holds up to 200 Lbs. Made of 5/8" thick particleboard. Simulated woodgrain finish is produced by an exacting photo-processing technique. Includes precision edge banding. Holds up to 200 Lbs.
Knape & Vogt 1980 Decorative Regular Duty Prefinished Shelf Board Knape & Vogt1980 WH Regular Duty Prefinished Shelf Board Knape & Vogt 1980 ESP 12X24 Decorative Regular Duty Shelf Board
Made of 5/8" thick particleboard. Simulated woodgrain finish is produced by an exacting photo-processing technique. Includes precision edge banding. Holds up to 200 Lbs. Made of 5/8" thick particleboard. Simulated woodgrain finish is produced by an exacting photo-processing technique. Includes precision edge banding. Holds up to 200 Lbs. Made of 5/8" thick particleboard. Simulated woodgrain finish is produced by an exacting photo-processing technique. Includes precision edge banding. Holds up to 200 Lbs.
Knape & Vogt 1980 ESP 8X36 Decorative Regular Duty Shelf Board Knape & Vogt 1980 Pre-Finished All Purpose Shelf Board Knape & Vogt 1980 Pre-Finished All Purpose Shelf Board
Made of 5/8" thick particleboard. Simulated woodgrain finish is produced by an exacting photo-processing technique. Includes precision edge banding. Holds up to 200 Lbs. Made of 5/8" thick particleboard. Simulated woodgrain finish is produced by an exacting photo-processing technique. Includes precision edge banding. Holds up to 200 Lbs. Made of 5/8" thick particleboard. Simulated woodgrain finish is produced by an exacting photo-processing technique. Includes precision edge banding. Holds up to 200 Lbs.
Knape & Vogt 1980 ESP 10X36 Decorative Regular Duty Shelf Board Knape & Vogt 1980 Decorative Regular Duty Prefinished Shelf Board Knape & Vogt 1980 ESP 8X48 Decorative Regular Duty Shelf Board
Made of 5/8" thick particleboard. Simulated woodgrain finish is produced by an exacting photo-processing technique. Includes precision edge banding. Holds up to 200 Lbs. Made of 5/8" thick particleboard. Simulated woodgrain finish is produced by an exacting photo-processing technique. Includes precision edge banding. Holds up to 200 Lbs. Made of 5/8" thick particleboard. Simulated woodgrain finish is produced by an exacting photo-processing technique. Includes precision edge banding. Holds up to 200 Lbs.
Knape & Vogt 1980 Decorative Regular Duty Prefinished Shelf Board Knape & Vogt 1980 Wall Mounted All Purpose Shelf Board Knape & Vogt 1980 WAL Regular Duty Prefinished Shelf Board
Made of 5/8" thick particleboard. Simulated woodgrain finish is produced by an exacting photo-processing technique. Includes precision edge banding. Holds up to 200 Lbs. Made of 5/8" thick particleboard. Simulated woodgrain finish is produced by an exacting photo-processing technique. Includes precision edge banding. Holds up to 200 Lbs. Made of 5/8" thick particleboard. Simulated woodgrain finish is produced by an exacting photo-processing technique. Includes precision edge ba