Home > HARDWARE > BUILDERS HARDWARE > HINGES > CONTINUOUS HINGES
Sort By:
1
SUPPORT WHITE                 National Hardware N116-475 Shelf Support SUPPORT BRASS
SUPPORTS BRONZE
Our Price: $0.38
Used to support shelves. 1/4" diameter shank. Safe working load 25 lbs. Boxed loose. National Hardware Shelf Support, Series: 158, 0.62 in Width, 0.05 in Thickness, Steel, Bronze, 25 lb Load Capacity, Suitable For Use With: National 157 Shelf Standards, 0.14 in Hole Diameter, For Supporting Shelves Used to support shelves. Can be used with National 157 shelf standards. Safe working load 25 lbs. Boxed loose.
National Hardware N224-675 Shelf Support SuperSlide 948 Pre-Loaded Wall Bracket T-HINGE ZINC PLATED 2IN
SUPPORTS BRASS
Our Price: $0.44
T HINGES 2IN ZN PLT
Our Price: $1.74
National Hardware Shelf Support, Series: 159, 1/4 in Shank Diameter, 1.22 in Length, 1/2 in Width, 0.05 in Thickness, Steel, Brass, 25 lb Load Capacity, 0.16 in Hole Diameter, For Supporting Shelves Secures shelf to side wall of closet. Pre-loaded with pins and anchors, no screws needed. Accommodates pole clips and shelf stops in "TotalSlide" system. Offset screw holes for extra strength and to prevent wood from splitting. Tight pin for left or right hand applications. Steel with aluminum pin. Safe working load: 18 lbs. Visual-pack.
National Hardware 284BC Flush/Full Inset Light T Hinge Prime Line U 9335 Spoon Shelf Support Peg T-HINGE ZINC PLATED 4IN
T HINGES 3IN ZN PLT
Our Price: $1.97
T HINGES 4IN ZN PLT
Our Price: $2.50
National Hardware T Hinge, Flush/Full Inset, Light, Series: 284BC, 6 Holes, 0.21 in Hole Diameter, 0.056 in Leaf Thickness, 3 in Door Leaf Length, 0.69 in Frame Leaf Length, 2.24 in Frame Leaf Width, 0.17 in Diameter Pin, Aluminum Pin, Wall Mounting, Fasteners: NO 6 Flat Headed Screw, 18 lb Load Capacity, 2.34 in Overall Width, Hot Rolled Steel For use with cabinets and storage cabinets with glass shelves. Offset screw holes for extra strength and to prevent wood from splitting. Tight pin for left or right hand applications. Steel with aluminum pin. Safe working load: 18 lbs. Visual-pack.
Closetmaid 1164XBJ Support Bracket SuperSlide 6609 Pre-Loaded Wall Bracket Stanley 830226 Door Hinge
Closetmaid Support Bracket, 12 in Length, 2 in Width, 2 in Depth, Steel, Epoxy Coated, White, Suitable For Use With: Wire Shelving, Includes: (2) Brackets, (2) Anchors, (2) NO 8 Pins Heavy duty preloaded wall bracket with anchor, mounts to the side wall and holds the end of the SuperSlide shelf and Hang Rod. Supports front lip of shelving and hang rod where they meet the side wall. With pre-loaded pins. For drywall installations. 4.125"H x 1.75"W x 2"D. Material: Resin. Heavy-gauge cold-rolled steel for added strength. Flush pin for finished appearance. Five knuckle, full mortise design. Screw holes are countersunk. Removable pin for easier installation. Screws included.
Stanley 830229 Door Hinge Stanley 830232 Door Hinge National Hardware SPB512RC Round Corner Door Hinge
Heavy-gauge cold-rolled steel for added strength. Nib on hinge for finished appearance. Five knuckle, full mortise design. Screw holes are countersunk. Removable pin for easier installation. Heavy-gauge cold-rolled steel for added strength. Nib on hinge for finished appearance. Five knuckle, full mortise design. Screw holes are countersunk. Removable pin for easier installation or removal of doors. National Hardware Door Hinge, Full Mortise, Round Corner, Series: SPB512RC, Knuckle Bearing, 6 Holes, 3 in Door Leaf Length, 3 in Frame Leaf Length, Non-Rising, Removable Pin, Fasteners: (5) Knuckles, Screws, 50 lb Load Capacity, 3 in Overall Width, Steel, Brass Tone, BHMA A138.18, For Interior Residential Doors
National Hardware N830-268 Square Corner Door Hinge HINGE DOOR BRASS TNE 3IN      T-HINGE LD STEEL 2IN ZINC PLTD
National Hardware Door Hinge, Full Mortise, Square Corner, Series: SPB512, Knuckle Bearing, 3 in Door Leaf Length, 3 in Frame Leaf Length, Non-Rising, Removable Pin, Fasteners: (5) Knuckles, Screws, 50 lb Load Capacity, 3 in Overall Width, Steel, Brass Tone, BHMA A138.18, For Interior Residential Doors Heavy-gauge cold-rolled steel for added strength. Flush pin for finished appearance. Five knuckle, full mortise design. Screw holes are countersunk. Removable pin for easier installation. For use on tool boxes, storage chests and small shed doors.
Closetmaid 6610 Wall Clip Prime Line U 9337 Spoon Shelf Support Peg HINGE DOOR (HPCE) ZN 3IN
Anchors shelf to wall. Ensures stability of shelf. For use with cabinets and storage cabinets with glass shelves. Heavy-gauge cold-rolled steel for added strength. Flush pin for finished appearance. Five knuckle, full mortise design. Screw holes are countersunk. Removable pin for easier installation.
HINGE DOOR (HPCE) ZN 3IN      Prime Line U 9116 Spoon Shelf Support Peg Prime Line U 9150 Spoon Shelf Support Peg
Heavy-gauge cold-rolled steel for added strength. Flush pin for finished appearance. Five knuckle, full mortise design. Screw holes are countersunk. Removable pin for easier installation. For use with cabinets and storage cabinets with glass shelves. For use with cabinets and storage cabinets with glass shelves.
Prime Line U 9360 Shelf Support Peg Mintcraft 20347ORX Door Hinge SUPPORT WHITE
Mini-style frequently used in stereo and display cabinets. 1/2"D support, 5mm OD x 3/8"L peg. 12 lbs. per peg maximum safe-weight load. 2.2mm thickness, 5-knuckle, loose pin. Used to support shelves. 1/4" diameter shank. Safe working load 25 lbs. Boxed loose.
T-HINGE ZINC PLATED 5IN       Closetmaid 1002 Joiner Plate SuperSlide 5655 Closet Rod Support
T HINGES 5IN ZN PLT
Our Price: $3.20
Offset screw holes for extra strength and to prevent wood from splitting. Tight pin for left or right hand applications. Steel with aluminum pin. Safe working load: 18 lbs. Visual-pack. Use to join 2 shelves together to create a continuous run of shelving. Supports the joining of 2 wire shelves. One set consists of 2 joiner plates, 1 bolt and 1 nut. NOT for use with Close Mesh shelving. 1.19?H x 2.25?W x 1.13?D. Material: Resin. Converts shelf & rod shelving to a continous slide. Hang rod snaps into bracket to create an continuous slide for hangers. Snaps onto SuperSlide shelf to support hang rod. Use one every 36 in. (91,44cm) of hang rod and at each end of shelf and hang rod. 5.75"H x 0.87"W x 3.87"D. Material: Resin.
Knape & Vogt 256PZC Adjustable Pilaster Shelf Support Stanley 830224 Door Hinge Stanley 830230 Door Hinge
Snaps securely into place. For use with No. 233 and No. 255. High strength steel. Heavy-gauge cold-rolled steel for added strength. Flush pin for finished appearance. Five knuckle, full mortise design. Screw holes are countersunk. Removable pin for easier installation. Screws included. Heavy-gauge cold-rolled steel for added strength. Nib on hinge for finished appearance. Five knuckle, full mortise design. Screw holes are countersunk. Removable pin for easier installation or removal of doors.
Stanley 830227 Door Hinge HINGE WELDING PLN STL 2X2IN   Mintcraft 20347SNX Door Hinge
Heavy-gauge cold-rolled steel for added strength. Nib on hinge for finished appearance. Five knuckle, full mortise design. Screw holes are countersunk. Removable pin for easier installation. For use on cabinets and lightweight doors.  5 knuckles. 2.2mm thickness, 5-knuckle, loose pin.
Prime Line U 9147 Shelf Support Peg National Hardware N830-260 Round Corner Door Hinge National Hardware N830-263 Round Corner Door Hinge
1/4" diameter peg and support a maximum safe load of 5 lb. Used to support cabinet shelves. National Hardware Door Hinge, Full Mortise, Round Corner, Series: SPB512R5/8, Knuckle Bearing, 3-1/2 in Door Leaf Length, 3-1/2 in Frame Leaf Length, Non-Rising, Removable Pin, Fasteners: (5) Knuckles, Screws, 50 lb Load Capacity, 3-1/2 in Overall Width, Steel, Brass Tone, BHMA A138.18, For Interior Residential Doors National Hardware Door Hinge, Full Mortise, Round Corner, Series: SPB512RC, Knuckle Bearing, 6 Holes, 3-1/2 in Door Leaf Length, 3-1/2 in Frame Leaf Length, Non-Rising, Removable Pin, Fasteners: (5) Knuckles, Screws, 50 lb Load Capacity, 3-1/2 in Overall Width, Steel, Brass Tone, BHMA A138.18, For Interior Residential Doors
National Hardware N830-266 Square Corner Door Hinge Knape & Vogt 335P PLAS Shelf Support Pin Mintcraft 20347ST4C Door Hinge
National Hardware Door Hinge, Full Mortise, Square Corner, Series: SPB512, Knuckle Bearing, 3-1/2 in Door Leaf Length, 3-1/2 in Frame Leaf Length, Non-Rising, Removable Pin, Fasteners: (5) Knuckles, Screws, 50 lb Load Capacity, 3-1/2 in Overall Width, Steel, Brass Tone, BHMA A138.18, For Interior Residential Doors 1/4" diameter x 7/16"L pin. Polybagged. 2.2mm thickness, 5-knuckle, loose pin.
HINGE SURFACE PLAIN STEEL 2IN Mintcraft 20347BBX Door Hinge Mintcraft 20347ABX Door Hinge
National Hardware Door Hinge, Non-Swaged, Tight Pin, Surface Mount, 70 lb, 2 in Overall Length, Cold-Rolled Steel, For Surface Application 2.2mm thickness, 5-knuckle, loose pin. 2.2mm thickness, 5-knuckle, loose pin.
SUPPORT ZINC PLATED           National Hardware N830-223 Square Corner Door Hinge HINGE DOOR PRIME CTD WHITE 3IN
Used to support shelves. 1/4" diameter shank. Safe working load 25 lbs. Visual-pack. National Hardware Door Hinge, Full Mortise, Square Corner, Series: SPB512, Knuckle Bearing, 3 in Door Leaf Length, 3 in Frame Leaf Length, Non-Rising, Removable Pin, Fasteners: (5) Knuckles, Screws, 50 lb Load Capacity, 3 in Overall Width, Steel, White, BHMA A138.18, For Interior Residential Doors Heavy-gauge cold-rolled steel for added strength. Flush pin for finished appearance. Five knuckle, full mortise design. Screw holes are countersunk. Removable pin for easier installation.
HINGE DOOR PRIME CTD WHITE 3IN HINGE SURFACE PLN STL 2IN     SUPPORT BRONZE
Heavy-gauge cold-rolled steel for added strength. Flush pin for finished appearance. Five knuckle, full mortise design. Countersunk screw holes with fasteners included. Removable pin for easier installation. Bagged. Non-swaged hinge for surface application by welding. Manufactured with cold rolled steel. Five knuckle, full mortise design. Tight pin for more secure applications. Safe working load: 70 lbs. Boxed loose. Used to support shelves. Can be used with National 157 shelf standards. Safe working load: 70 lbs. Visual-pack.
Stanley 830199 Door Hinge Stanley 830202 Door Hinge Stanley 830205 Door Hinge
Heavy-gauge cold-rolled steel for added strength. Flush pin for finished appearance. Five knuckle, full mortise design. Screw holes are countersunk. Removable pin for easier installation. Screws included. Heavy-gauge cold-rolled steel for added strength. Nib on hinge for finished appearance. Five knuckle, full mortise design. Screw holes are countersunk. Removable pin for easier installation. Heavy-gauge cold-rolled steel for added strength. Nib on hinge for finished appearance. Five knuckle, full mortise design. Screw holes are countersunk. Removable pin for easier installation or removal of doors.
Prime Line U 9302 Shelf Support Peg SuperSlide 75651 Closet Rod Connector Closetmaid 6620 Wall Bracket
3mm diameter peg and support a maximum safe load of 10 lb. Used to support cabinet shelves. Use with SuperSlide shelving to create uninterrupted sliding action around corners for walk-in closets. Keeps hangers from sliding off exposed ends. Support the connection of the two pieces of hang rod with a hang bar support. 2"H x 0.5"W x 0.5"D. Material: Plastic. Heavy duty preloaded bracket with anchor easily mounts to the wall and holds the end of any size ClosetMaid shelf. Provides side wall support. Supports front lip of shelving where it meets the side wall. For drywall installations. Includes: 2.875"H x 2.125"W x 1.75"D. Material: Resin.
Mintcraft 20347BCX Door Hinge T-HINGE ZINC PLATED 6IN       HINGE DOOR (HPCE) ZN 3-1/2IN
T HINGES 6IN ZN PLT
Our Price: $3.74
2.2mm thickness, 5-knuckle, loose pin. Offset screw holes for extra strength and to prevent wood from splitting. Tight pin for left or right hand applications. Steel with aluminum pin. Safe working load: 18 lbs. Visual-pack. Heavy-gauge cold-rolled steel for added strength. Flush pin for finished appearance. Five knuckle, full mortise design. Screw holes are countersunk. Removable pin for easier installation.
HINGE DOOR (HPCE) ZN 3-1/2IN  HINGE DOOR 5/8 RND CNR POL BRS Stanley 830247 Door Hinge
Heavy-gauge cold-rolled steel for added strength. Flush pin for finished appearance. Five knuckle, full mortise design. Screw holes are countersunk. Removable pin for easier installation. 2.2mm thickness, 5-knuckle, loose pin. Heavy-gauge cold-rolled steel for added strength. Nib on hinge for finished appearance. Five knuckle, full mortise design. Screw holes are countersunk. Removable pin for easier installation.
Stanley 830244 Door Hinge Stanley 830250 Door Hinge Mintcraft 20338BCX Door Hinge
Heavy-gauge cold-rolled steel for added strength. Flush pin for finished appearance. Five knuckle, full mortise design. Screw holes are countersunk. Removable pin for easier installation. Screws included. Heavy-gauge cold-rolled steel for added strength. Nib on hinge for finished appearance. Five knuckle, full mortise design. Screw holes are countersunk. Removable pin for easier installation or removal of doors. 2.2mm thickness, 5-knuckle. Screws included.
Mintcraft 20338SCX Door Hinge Mintcraft 20338ABX Door Hinge Mintcraft 20347ANX Door Hinge
2.2mm thickness, 5-knuckle. Screws included. 2.2mm thickness, 5-knuckle. Screws included. 2.2mm thickness, 5-knuckle, loose pin.
Mintcraft 20347SCX Door Hinge Mintcraft 20338SNX Door Hinge Stanley 131193 Hinge Screw Eye
2.2mm thickness, 5-knuckle, loose pin. 2.2mm thickness, 5-knuckle. Screws included. To be used in wood gate applications in conjunction with screw hooks, bolt hooks and pintles.
HINGE DOOR 5/8 RND CNR SAT NIC HINGE DOOR 5/8 RND CNR SAT BRS HINGE DOOR SQ CNR POL BRS 3IN
2.2mm thickness, 5-knuckle, loose pin. 2.2mm thickness, 5-knuckle, loose pin. 2.2mm thickness, 5-knuckle. Screws included.
HINGE DOOR 5/8 RND CNR OIL BRZ Mintcraft 20338BBX Door Hinge Stanley 130112 Screw Hook
2.2mm thickness, 5-knuckle, loose pin. 2.2mm thickness, 5-knuckle. Screws included. For use with new installations with Stanley's 130732, 131102, 248047, 131060, 130765, and 130799 hinge straps. Adjusts to correct gate sag.
Closetmaid 1180 Support Bracket HINGE DOOR SQUARE CNR ORB 3IN HINGE DOOR SQ CNR SAT BRS 3IN
Closetmaid Support Bracket, 12 in Length, 2 in Width, 2 in Depth, Steel, Epoxy Coated, White, Suitable For Use With: Wire Shelving, Includes: (1) Support Bracket, (1) Anchor, (1) NO 8 Pin 2.2mm thickness, 5-knuckle. Screws included. 2.2mm thickness, 5-knuckle. Screws included.
HINGE DOOR SQ CNR SAT NIC 3IN SuperSlide 6641 Wall Bracket Mintcraft 20338ORX Door Hinge
2.2mm thickness, 5-knuckle. Screws included. Supports low profile SuperSlide shelving in a wall to wall installation. Includes: 2 wall brackets, 4 pins and 4 anchors. Use in conjunction with support brackets and wall clips for installing wire shelving. Suports front lip of shelving where it meets the side wall. 2"H x 2.19W x 1.75"D. Material: Resin 2.2mm thickness, 5-knuckle. Screws included.
HINGE DR 1/4RD 3X3IN SAT BRASS HINGE DR SQ 3X3IN SAT BRASS   Knape & Vogt 256 Adjustable Dimple Pilaster Support
5-knuckle, 2.2mm thickness. Screws included. 2.2mm thickness, 5-knuckle. Screws included. Snaps securely into place. For use with No. 233 and No. 255. High strength steel.
SHELF SUPPORT 1/4IN ZINC PLTD Stanley 830242 Door Hinge Stanley 830245 Door Hinge
Heavy-gauge cold-rolled steel for added strength. Flush pin for finished appearance. Five knuckle, full mortise design. Screw holes are countersunk. Removable pin for easier installation. Screws included. Heavy-gauge cold-rolled steel for added strength. Nib on hinge for finished appearance. Five knuckle, full mortise design. Screw holes are countersunk. Removable pin for easier installation.
Stanley 830248 Door Hinge Closetmaid 1001 Corner Support Bracket HINGE DOOR SATIN CHROME 3IN
Heavy-gauge cold-rolled steel for added strength. Nib on hinge for finished appearance. Five knuckle, full mortise design. Screw holes are countersunk. Removable pin for easier installation or removal of doors. Supports front lip of shelving to keep it level where it meets another shelf in a corner. Snap in place design. For corner installations.  0.375?H x 5?W x 0.75?D. Material: steel, coated with epoxy. Heavy-gauge cold-rolled steel for added strength. Flush pin for finished appearance. Five knuckle, full mortise design. Screw holes are countersunk. Removable pin for easier installation. Screws included.
HINGE WELDING PLN STL 3X3IN   Stanley 830203 Door Hinge Stanley 830197 Door Hinge
For use on cabinets and lightweight doors.  5 knuckles. Heavy-gauge cold-rolled steel for added strength. Nib on hinge for finished appearance. Five knuckle, full mortise design. Screw holes are countersunk. Removable pin for easier installation or removal of doors. Heavy-gauge cold-rolled steel for added strength. Flush pin for finished appearance. Five knuckle, full mortise design. Screw holes are countersunk. Removable pin for easier installation. Screws included.
National Hardware N830-200 Round Corner Door Hinge HINGE SURFACE PLN STL 2-1/2IN HINGE WELDING STL 2-1/2X2-1/2
DOOR HINGES 3-1/2IN ORB
Our Price: $4.30
National Hardware Door Hinge, Full Mortise, Round Corner, Series: SPB512RC, Knuckle Bearing, 6 Holes, 3-1/2 in Door Leaf Length, 3-1/2 in Frame Leaf Length, Non-Rising, Removable Pin, Fasteners: (5) Knuckles, Screws, 50 lb Load Capacity, 3-1/2 in Overall Width, Steel, Oil Rubbed Bronze, BHMA A138.18, For Interior Residential Doors Non-swaged hinge for surface application by welding. Manufactured with cold rolled steel. Five knuckle, full mortise design. Tight pin for more secure applications. Safe working load: 70 lbs. Boxed loose. For use on cabinets and lightweight doors.  5 knuckles.
Stanley 830231 Door Hinge National Hardware N830-264 Round Corner Door Hinge National Hardware N830-267 Square Corner Door Hinge
Heavy-gauge cold-rolled steel for added strength. Nib on hinge for finished appearance. Five knuckle, full mortise design. Screw holes are countersunk. Removable pin for easier installation or removal of doors. National Hardware Door Hinge, Full Mortise, Round Corner, Series: SPB512RC, Knuckle Bearing, 8 Holes, 4 in Door Leaf Length, 4 in Frame Leaf Length, Non-Rising, Removable Pin, Fasteners: (5) Knuckles, Screws, 50 lb Load Capacity, 4 in Overall Width, Steel, Brass Tone, BHMA A138.18, For Interior Residential Doors National Hardware Door Hinge, Full Mortise, Square Corner, Series: SPB512, Knuckle Bearing, 4 in Door Leaf Length, 4 in Frame Leaf Length, Non-Rising, Removable Pin, Fasteners: (5) Knuckles, Screws, 50 lb Load Capacity, 4 in Overall Width, Steel, Brass Tone, BHMA A138.18, For Interior Residential Doors
HINGE DOOR (HPCE) ZN 4IN      HINGE DOOR (HPCE) ZN 4IN      Stanley 830221 Door Hinge
Heavy-gauge cold-rolled steel for added strength. Flush pin for finished appearance. Five knuckle, full mortise design. Screw holes are countersunk. Removable pin for easier installation. Heavy-gauge cold-rolled steel for added strength. Flush pin for finished appearance. Five knuckle, full mortise design. Screw holes are countersunk. Removable pin for easier installation. Heavy-gauge cold-rolled steel for added strength. Nib on hinge for finished appearance. Five knuckle, full mortise design. Screw holes are countersunk. Removable pin for easier installation or removal of doors.
Stanley 830225 Door Hinge Stanley 830228 Door Hinge National Hardware N830-215 Round Corner Door Hinge
Heavy-gauge cold-rolled steel for added strength. Flush pin for finished appearance. Five knuckle, full mortise design. Screw holes are countersunk. Removable pin for easier installation. Screws included. Heavy-gauge cold-rolled steel for added strength. Nib on hinge for finished appearance. Five knuckle, full mortise design. Screw holes are countersunk. Removable pin for easier installation. National Hardware Door Hinge, Full Mortise, Round Corner, Series: SPB512R5/8, Knuckle Bearing, 3-1/2 in Door Leaf Length, 3-1/2 in Frame Leaf Length, Non-Rising, Removable Pin, Fasteners: (5) Knuckles, Screws, 50 lb Load Capacity, 3-1/2 in Overall Width, Steel, White, BHMA A138.18, For Interior Residential Doors
National Hardware N830-218 Round Corner Door Hinge National Hardware N830-261 Round Corner Door Hinge Mintcraft 20348SCX Door Hinge
National Hardware Door Hinge, Full Mortise, Round Corner, Series: SPB512RC, Knuckle Bearing, 6 Holes, 3-1/2 in Door Leaf Length, 3-1/2 in Frame Leaf Length, Non-Rising, Removable Pin, Fasteners: (5) Knuckles, Screws, 50 lb Load Capacity, 3-1/2 in Overall Width, Steel, White, BHMA A138.18, For Interior Residential Doors National Hardware Door Hinge, Full Mortise, Round Corner, Series: SPB512R5/8, Knuckle Bearing, 4 in Door Leaf Length, 4 in Frame Leaf Length, Non-Rising, Removable Pin, Fasteners: (5) Knuckles, Screws, 50 lb Load Capacity, 4 in Overall Width, Steel, Brass Tone, BHMA A138.18, For Interior Residential Doors 2.2mm thickness, 5-knuckle, loose pin.
Stanley 830204 Door Hinge National Hardware N830-201 Round Corner Door Hinge Stanley 830198 Door Hinge
DOOR HINGES 4IN ORB
Our Price: $4.58
Heavy-gauge cold-rolled steel for added strength. Nib on hinge for finished appearance. Five knuckle, full mortise design. Screw holes are countersunk. Removable pin for easier installation or removal of doors. National Hardware Door Hinge, Full Mortise, Round Corner, Series: SPB512RC, Knuckle Bearing, 8 Holes, 4 in Door Leaf Length, 4 in Frame Leaf Length, Non-Rising, Removable Pin, Fasteners: (5) Knuckles, Screws, 50 lb Load Capacity, 4 in Overall Width, Steel, Oil Rubbed Bronze, BHMA A138.18, For Interior Residential Doors Heavy-gauge cold-rolled steel for added strength. Flush pin for finished appearance. Five knuckle, full mortise design. Screw holes are countersunk. Removable pin for easier installation. Screws included.
Knape & Vogt 345 Shelf Support Knape & Vogt 345 Shelf Support Mintcraft LR083 Bolt Hook
For 5 mm drilled holes. Use with No.129 rubber cushion. 4.7 mm diameter x 5/16" L pin. Poly pack. For 5 mm drilled holes. Use with No.129 rubber cushion. 4.7 mm diameter x 5/16" L pin. Poly pack. Can be used with gate strap hinges to support wooden gates and fences. Can be easily adjusted.
Knape & Vogt 346 Shelf Support Knape & Vogt 346P BR Shelf Support T-HINGE LD STEEL 3IN ZINC PLTD
Use with No. 129 rubber cushion. For 1/4" diameter holes x 3/8"L pin. Use with No. 129 rubber cushion. For 1/4" diameter holes x 3/8"L pin. For use on tool boxes, storage chests and small shed doors.
Mintcraft 20339SNX Door Hinge Stanley 830249 Door Hinge Stanley 830243 Door Hinge
2.2mm thickness, 5-knuckle. Screws included. Heavy-gauge cold-rolled steel for added strength. Nib on hinge for finished appearance. Five knuckle, full mortise design. Screw holes are countersunk. Removable pin for easier installation or removal of doors. Heavy-gauge cold-rolled steel for added strength. Flush pin for finished appearance. Five knuckle, full mortise design. Screw holes are countersunk. Removable pin for easier installation. Screws included.
Stanley 830246 Door Hinge Mintcraft 20339SCX Door Hinge Mintcraft LR094 Screw Hook
Heavy-gauge cold-rolled steel for added strength. Nib on hinge for finished appearance. Five knuckle, full mortise design. Screw holes are countersunk. Removable pin for easier installation. 2.2mm thickness, 5-knuckle. Screws included. Easily installs into wood surfaces. Replaces worn or broken bolt hooks. Can be used with strap hinges.
National Hardware N830-233 Round Corner Door Hinge National Hardware N830-236 Round Corner Door Hinge National Hardware N830-239 Square Corner Door Hinge
National Hardware Door Hinge, Full Mortise, Round Corner, Series: SPB512R5/8, Knuckle Bearing, 3-1/2 in Door Leaf Length, 3-1/2 in Frame Leaf Length, Non-Rising, Removable Pin, Fasteners: (5) Knuckles, Screws, 50 lb Load Capacity, 3-1/2 in Overall Width, Steel, Satin Chrome, BHMA A138.18, For Interior Residential Doors National Hardware Door Hinge, Full Mortise, Round Corner, Series: SPB512RC, Knuckle Bearing, 6 Holes, 3-1/2 in Door Leaf Length, 3-1/2 in Frame Leaf Length, Non-Rising, Removable Pin, Fasteners: (5) Knuckles, Screws, 50 lb Load Capacity, 3-1/2 in Overall Width, Steel, Satin Chrome, BHMA A138.18, For Interior Residential Doors National Hardware Door Hinge, Full Mortise, Square Corner, Series: SPB512, Knuckle Bearing, 3-1/2 in Door Leaf Length, 3-1/2 in Frame Leaf Length, Non-Rising, Removable Pin, Fasteners: (5) Knuckles, Screws, 50 lb Load Capacity, 3-1/2 in Overall Width, Steel, Satin Chrome, BHMA A138.18, For Interior Residential Doors
National Hardware 560 Non-Swaged Weldable Door Hinge HINGE DOOR ANT BRASS 3IN      HINGE DOOR ANT BRASS 3IN
DOOR HINGES 3IN ANT BRS
Our Price: $4.79
DOOR HINGES 3IN ANT BRS
Our Price: $4.79
National Hardware Door Hinge, Non-Swaged, Weldable, Series: 560, 0.11 in Leaf Thickness, 3 in Door Leaf Length, 3 in Frame Leaf Length, Non-Removable Pin, 1/2 in Diameter Pin, Surface Mounting, 90 lb Load Capacity, 3 in Overall Width, Cold Rolled Steel, Plain Steel, For Surface Application By Welding Heavy-gauge cold-rolled steel for added strength. Flush pin for finished appearance. Five knuckle, full mortise design. Screw holes are countersunk. Removable pin for easier installation. Heavy-gauge cold-rolled steel for added strength. Flush pin for finished appearance. Five knuckle, full mortise design. Screw holes are countersunk. Removable pin for easier installation.
HINGE DOOR ANT BRASS 3IN      Mintcraft 20347US4 Door Hinge T-HINGE LD STEEL 4IN ZINC PLTD
DOOR HINGES 3IN ANT BRS
Our Price: $4.79
Heavy-gauge cold-rolled steel for added strength. Flush pin for finished appearance. Five knuckle, full mortise design. Countersunk screw holes with fasteners included. Removable pin for easier installation. Bagged. 2.2mm thickness, 5-knuckle, loose pin. For use on tool boxes, storage chests and small shed doors.
HINGE DOOR PLSHD BRASS 3IN    HINGE DOOR POLISH BRASS 3IN   National Hardware N830-214 Square Corner Door Hinge
Heavy-gauge cold-rolled steel for added strength. Flush pin for finished appearance. Five knuckle, full mortise design. Screw holes are countersunk. Removable pin for easier installation. Heavy-gauge cold-rolled steel for added strength. Flush pin for finished appearance. Five knuckle, full mortise design. Countersunk screw holes with fasteners included. Removable pin for easier installation. Bagged. National Hardware Door Hinge, Full Mortise, Square Corner, Series: SPB512, Knuckle Bearing, 3 in Door Leaf Length, 3 in Frame Leaf Length, Non-Rising, Removable Pin, Fasteners: (5) Knuckles, Screws, 50 lb Load Capacity, 3 in Overall Width, Steel, Polished Brass, BHMA A138.18, For Interior Residential Doors
Mintcraft 20339BBX Door Hinge Mintcraft 20348SNX Door Hinge Stanley 130146 Screw Hook
2.2mm thickness, 5-knuckle. Screws included. 2.2mm thickness, 5-knuckle, loose pin. For use with new installations with Stanley's 130732, 131102, 248047, 131060, 130765, and 130799 hinge straps. Adjusts to correct gate sag.
National Hardware 286BC Extra Heavy Flush/Full Inset T Hinge Stanley 830222 Door Hinge Stanley 830219 Door Hinge
T HINGES 4IN ZN PLT
Our Price: $4.98
National Hardware T Hinge, Extra Heavy, Flush/Full Inset, Series: 286BC, 0.076 in Leaf Thickness, 4 in Door Leaf Length, 1.55 in Door Leaf Width, 3.3 in Frame Leaf Length, 1.32 in Frame Leaf Width, 0.222 in Diameter Pin, Wall Mounting, Fasteners: NO 9 Flat Head Screw, 60 lb Load Capacity, Hot Rolled Steel, Zinc Plated, BHMA A138.18 Heavy-gauge cold-rolled steel for added strength. Nib on hinge for finished appearance. Five knuckle, full mortise design. Screw holes are countersunk. Removable pin for easier installation or removal of doors. Heavy-gauge cold-rolled steel for added strength. Nib on hinge for finished appearance. Five knuckle, full mortise design. Screw holes are countersunk. Removable pin for easier installation.
National Hardware N830-216 Round Corner Door Hinge HINGE DOOR PLSH BRASS 3-1/2IN National Hardware N830-209 Round Corner Door Hinge
National Hardware Door Hinge, Full Mortise, Round Corner, Series: SPB512R5/8, Knuckle Bearing, 4 in Door Leaf Length, 4 in Frame Leaf Length, Non-Rising, Removable Pin, Fasteners: (5) Knuckles, Screws, 50 lb Load Capacity, 4 in Overall Width, Steel, White, BHMA A138.18, For Interior Residential Doors Heavy-gauge cold-rolled steel for added strength. Flush pin for finished appearance. Five knuckle, full mortise design. Screw holes are countersunk. Removable pin for easier installation. National Hardware Door Hinge, Full Mortise, Round Corner, Series: SPB512RC, Knuckle Bearing, 6 Holes, 3-1/2 in Door Leaf Length, 3-1/2 in Frame Leaf Length, Non-Rising, Removable Pin, Fasteners: (5) Knuckles, Screws, 50 lb Load Capacity, 3-1/2 in Overall Width, Steel, Polished Brass, BHMA A138.18, For Interior Residential Doors
Stanley 830206 Door Hinge National Hardware N176-644 Square Corner Door Hinge Mintcraft 20348US4 Door Hinge
Heavy-gauge cold-rolled steel for added strength. Flush pin for finished appearance. Five knuckle, full mortise design. Screw holes are countersunk. Removable pin for easier installation. Screws included. National Hardware Door Hinge, Full Mortise, Square Corner, Series: V512, Knuckle Bearing, 6 Holes, 0.272 in Hole Diameter, 0.08 in Leaf Thickness, 4 in Door Leaf Length, 4 in Frame Leaf Length, Removable Pin, 0.234 in Diameter Pin, Wall Mounting, Fasteners: (5) Knuckles, NO 9 Flat Head Screws, 55 lb Load Capacity, 4 in Overall Width, Steel 2.2mm thickness, 5-knuckle, loose pin.
National Hardware N830-234 Round Corner Door Hinge National Hardware N830-237 Round Corner Door Hinge Stanley 131060 Hinge Strap
National Hardware Door Hinge, Full Mortise, Round Corner, Series: SPB512R5/8, Knuckle Bearing, 4 in Door Leaf Length, 4 in Frame Leaf Length, Non-Rising, Removable Pin, Fasteners: (5) Knuckles, Screws, 50 lb Load Capacity, 4 in Overall Width, Steel, Satin Chrome, BHMA A138.18, For Interior Residential Doors National Hardware Door Hinge, Full Mortise, Round Corner, Series: SPB512RC, Knuckle Bearing, 8 Holes, 4 in Door Leaf Length, 4 in Frame Leaf Length, Non-Rising, Removable Pin, Fasteners: (5) Knuckles, Screws, 50 lb Load Capacity, 4 in Overall Width, Steel, Satin Chrome, BHMA A138.18, For Interior Residential Doors Designed for new installations with Stanley's 130708, 130559, 130583, and 130617 hooks. Strap punched for 5/16" (6" and 8" sizes) or 3/8" (10", 12", 14", 16" 18", 20" and 24" sizes) bolts.
Stanley 131227 Hinge Screw Eye Mintcraft 20348ORX Door Hinge Stanley 830170 Door Hinge
To be used in wood gate applications in conjunction with screw hooks, bolt hooks and pintles. 2.2mm thickness, 5-knuckle, loose pin. Heavy-gauge cold-rolled steel for added strength. Flush pin for finished appearance. Five knuckle, full mortise design. Screw holes are countersunk. Removable pin for easier installation. Screws included.
National Hardware V535 Door Hinge National Hardware N830-173 Round Corner Door Hinge National Hardware N830-176 Square Corner Door Hinge
National Hardware Door Hinge, Series: V535, Suitable For Use With: Bi-Fold Doors, 3 in Door Leaf Length, 3 in Frame Leaf Length, Removable, Tight, Non-Rising Pin, Surface Mounting, 3 in Overall Width, Steel, Brass, For Residential Applications National Hardware Door Hinge, Full Mortise, Round Corner, Series: SPB512RC, Knuckle Bearing, 6 Holes, 3-1/2 in Door Leaf Length, 3-1/2 in Frame Leaf Length, Non-Rising, Removable Pin, Fasteners: (5) Knuckles, Screws, 50 lb Load Capacity, 3-1/2 in Overall Width, Steel, Antique Brass, BHMA A138.18, For Interior Residential Doors National Hardware Door Hinge, Full Mortise, Square Corner, Series: SPB512, Knuckle Bearing, 3-1/2 in Door Leaf Length, 3-1/2 in Frame Leaf Length, Non-Rising, Removable Pin, Fasteners: (5) Knuckles, Screws, 50 lb Load Capacity, 3-1/2 in Overall Width, Steel, Antique Brass, BHMA A138.18, For Interior Residential Doors
Mintcraft 20339ORX Door Hinge Closetmaid 7561 U-Shape Shelf Clip HINGE WELDING STL 3-1/2X3-1/2
2.2mm thickness, 5-knuckle. Screws included. Attaches to the back of shelving to anchor shelf to back wall. Shelf clip "locks" shelving into place - attaching it at the top and bottom of shelf wire with or instead of wall clips. For concrete/stud and drywall installation. Material: Metal. For use on cabinets and lightweight doors.  5 knuckles.
National Hardware V284 Flush/Full Inset Light T Hinge Closetmaid 26607 Support Bracket HINGE DR RD 3.5X3.5IN SAT BRS
T HINGES 2IN ZN PLT
Our Price: $5.62
National Hardware Light T Hinge, Flush/Full Inset, Series: V284, 6 Holes, 0.2 in Hole Diameter, 0.048 in Leaf Thickness, 2 in Door Leaf Length, 0.54 in Frame Leaf Length, 1.81 in Frame Leaf Width, 0.119 in Diameter Pin, Aluminum Pin, Wall Mounting, Fasteners: NO 6 Flat Head Screw, 18 lb Load Capacity, 1.91 in Overall Width, Hot Rolled Steel Preloaded with #8 pin drive and anchors. No.6606, 71925 and No. 21775. - For Organizer, Wardrobe, SuperSlide and Close Mesh Shelves 12" in depth; and Wardrobe or hanging SuperSlide shelves 16" in depth. No. 26607, 71924, and No.21776 - For Organizer, SuperSlide (in storage application), and Close Mesh shelves 16" in depth. No.26605 - For Organizer, Wardrobe, SuperSlide and Close Mesh Shelves 20" in depth. 2.2mm thickness, 5-knuckle, loose pin.
Stanley 221713 Hook J-Bolt Stanley 830171 Door Hinge Stanley 830177 Door Hinge
BOLT J-HOOK 5/16X5IN SS
Our Price: $5.77
Designed for home and industrial applications. Two hex nuts included. Standard machine screw threads. For interior and exterior applications. Manufactured from steel wire. Heavy-gauge cold-rolled steel for added strength. Flush pin for finished appearance. Five knuckle, full mortise design. Screw holes are countersunk. Removable pin for easier installation. Screws included. Heavy-gauge cold-rolled steel for added strength. Nib on hinge for finished appearance. Five knuckle, full mortise design. Screw holes are countersunk. Removable pin for easier installation or removal of doors.
HINGE DOOR SQ SATIN CHROME 4IN National Hardware 286BC Extra Heavy Flush/Full Inset T Hinge Knape & Vogt 256 Adjustable Dimple Pilaster Support
T HINGES 6IN ZN PLT
Our Price: $5.90
Heavy-gauge cold-rolled steel for added strength. Nib on hinge for finished appearance. Five knuckle, full mortise design. Screw holes are countersunk. Removable pin for easier installation or removal of doors. National Hardware T Hinge, Extra Heavy, Flush/Full Inset, Series: 286BC, 0.095 in Leaf Thickness, 6 in Door Leaf Length, 2.15 in Door Leaf Width, 4-1/4 in Frame Leaf Length, 1.83 in Frame Leaf Width, 0.326 in Diameter Pin, Wall Mounting, Fasteners: NO 12 Flat Head Screw, 83 lb Load Capacity, Hot Rolled Steel, Zinc Plated, BHMA A138.18 Snaps securely into place. For use with No. 233 and No. 255. High strength steel.
National Hardware V284 Flush/Full Inset Light T Hinge National Hardware 286BC Extra Heavy Flush/Full Inset T Hinge Stanley 131102 Hinge Strap
T HINGES 3IN ZN PLT
Our Price: $6.04
T HINGES 5IN ZN PLT
Our Price: $6.04
National Hardware Light T Hinge, Flush/Full Inset, Series: V284, 6 Holes, 0.21 in Hole Diameter, 0.056 in Leaf Thickness, 3 in Door Leaf Length, 0.69 in Frame Leaf Length, 2.24 in Frame Leaf Width, 0.17 in Diameter Pin, Aluminum Pin, Wall Mounting, Fasteners: NO 6 Flat Head Screw, 18 lb Load Capacity, 2.34 in Overall Width, Hot Rolled Steel National Hardware T Hinge, Extra Heavy, Flush/Full Inset, Series: 286BC, 0.28 in Hole Diameter, 0.09 in Leaf Thickness, 5 in Door Leaf Length, 1.91 in Door Leaf Width, 3-3/4 in Frame Leaf Length, 1.6 in Frame Leaf Width, 0.272 in Diameter Pin, Wall Mounting, Fasteners: NO 9 Flat Head Screw, 70 lb Load Capacity, Hot Rolled Steel, Zinc Plated Designed for new installations with Stanley's 130708, 130559, 130583, and 130617 hooks. Strap punched for 5/16" (6" and 8" sizes) or 3/8" (10", 12", 14", 16" 18", 20" and 24" sizes) bolts.
Mintcraft LR095 Screw Hook Stanley 830179 Door Hinge Stanley 830207 Door Hinge
Easily installs into wood surfaces. Replaces worn or broken bolt hooks. Can be used with strap hinges. Heavy-gauge cold-rolled steel for added strength. Flush pin for finished appearance. Five knuckle, full mortise design. Screw holes are countersunk. Removable pin for easier installation. Screws included. Heavy-gauge cold-rolled steel for added strength. Flush pin for finished appearance. Five knuckle, full mortise design. Screw holes are countersunk. Removable pin for easier installation. Screws included.
Stanley 830213 Door Hinge National Hardware N830-182 Round Corner Door Hinge National Hardware N830-185 Square Corner Door Hinge
Heavy-gauge cold-rolled steel for added strength. Nib on hinge for finished appearance. Five knuckle, full mortise design. Screw holes are countersunk. Removable pin for easier installation or removal of doors. National Hardware Door Hinge, Full Mortise, Round Corner, Series: SPB512RC, Knuckle Bearing, 6 Holes, 3-1/2 in Door Leaf Length, 3-1/2 in Frame Leaf Length, Non-Rising, Removable Pin, Fasteners: (5) Knuckles, Screws, 50 lb Load Capacity, 3-1/2 in Overall Width, Steel, Polished Chrome, BHMA A138.18, For Interior Residential Doors National Hardware Door Hinge, Full Mortise, Square Corner, Series: SPB512, Knuckle Bearing, 3-1/2 in Door Leaf Length, 3-1/2 in Frame Leaf Length, Non-Rising, Removable Pin, Fasteners: (5) Knuckles, Screws, 50 lb Load Capacity, 3-1/2 in Overall Width, Steel, Polished Chrome, BHMA A138.18, For Interior Residential Doors
National Hardware N830-210 Round Corner Door Hinge HINGE DR SQ 3.5X3.5IN SAT NIC National Hardware N830-183 Round Corner Door Hinge
National Hardware Door Hinge, Full Mortise, Round Corner, Series: SPB512RC, Knuckle Bearing, 8 Holes, 4 in Door Leaf Length, 4 in Frame Leaf Length, Non-Rising, Removable Pin, Fasteners: (5) Knuckles, Screws, 50 lb Load Capacity, 4 in Overall Width, Steel, Polished Brass, BHMA A138.18, For Interior Residential Doors 2.2mm thickness, 5-knuckle. Screws included. National Hardware Door Hinge, Full Mortise, Round Corner, Series: SPB512RC, Knuckle Bearing, 8 Holes, 4 in Door Leaf Length, 4 in Frame Leaf Length, Non-Rising, Removable Pin, Fasteners: (5) Knuckles, Screws, 50 lb Load Capacity, 4 in Overall Width, Steel, Polished Chrome, BHMA A138.18, For Interior Residential Doors
National Hardware N830-186 Square Corner Door Hinge Closetmaid 7546 Down Clip/Anchor National Hardware N241-182 Square Corner Door Hinge
DOOR HINGES 3IN BLK
Our Price: $6.26
National Hardware Door Hinge, Full Mortise, Square Corner, Series: SPB512, Knuckle Bearing, 4 in Door Leaf Length, 4 in Frame Leaf Length, Non-Rising, Removable Pin, Fasteners: (5) Knuckles, Screws, 50 lb Load Capacity, 4 in Overall Width, Steel, Polished Chrome, BHMA A138.18, For Interior Residential Doors Attaches to the back of shelving to anchor shelf to back wall. For concrete/stud and drywall installation. Package includes 12 clips, 12 anchors and 12 #8 screws. National Hardware Door Hinge, Full Mortise, Square Corner, Series: V512, Knuckle Bearing, 6 Holes, 0.272 in Hole Diameter, 0.08 in Leaf Thickness, 3 in Door Leaf Length, 3 in Frame Leaf Length, Removable Pin, 0.234 in Diameter Pin, Wall Mounting, Fasteners: (5) Knuckles, NO 9 Flat Head Screws, 50 lb Load Capacity, 3 in Overall Width, Steel, Black
Stanley 130559 Full Threaded Bolt Hook National Hardware N241-190 Square Corner Door Hinge HINGE DOOR GRY SQ 4-1/2X4-1/2
DOOR HINGES 3-1/2IN BLK
Our Price: $6.42
Adjust to correct gate sag. Includes 2 washers and 2 nuts per hook. Full threaded hook is bolted through the post and firmly secured with standard size nuts and washers on each side. As a replacement part: use with National's 292 Bold Hook. For new installations: use with National's #294 Hinge Straps. Use with the Stanley/National Strap size 14"(N130-799), 16"(N168-336), and the 18"(N248-039). National Hardware Door Hinge, Full Mortise, Square Corner, Series: V512, Knuckle Bearing, 6 Holes, 0.272 in Hole Diameter, 0.08 in Leaf Thickness, 3-1/2 in Door Leaf Length, 3-1/2 in Frame Leaf Length, Removable Pin, 0.234 in Diameter Pin, Wall Mounting, Fasteners: (5) Knuckles, NO 9 Flat Head Screws, 50 lb Load Capacity, 3-1/2 in Overall Width 5 knuckle. 3.4 mm thickness. Includes (12) 1/2 Phillips screws and (12) 1/4 screws Phillips screws.
National Hardware V284 Flush/Full Inset Light T Hinge National Hardware N830-174 Round Corner Door Hinge National Hardware 560 Non-Swaged Weldable Door Hinge
T HINGES 4IN ZN PLT
Our Price: $6.49
DOOR HINGES 4IN ANT BRS
Our Price: $6.67
National Hardware Light T Hinge, Flush/Full Inset, Series: V284, 6 Holes, 0.23 in Hole Diameter, 0.056 in Leaf Thickness, 4 in Door Leaf Length, 3/4 in Frame Leaf Length, 2.44 in Frame Leaf Width, 0.195 in Diameter Pin, Aluminum Pin, Wall Mounting, Fasteners: NO 7 Flat Head Screw, 2.54 in Overall Width, Hot Rolled Steel, Zinc Plated, BHMA A138.18 National Hardware Door Hinge, Full Mortise, Round Corner, Series: SPB512RC, Knuckle Bearing, 8 Holes, 4 in Door Leaf Length, 4 in Frame Leaf Length, Non-Rising, Removable Pin, Fasteners: (5) Knuckles, Screws, 50 lb Load Capacity, 4 in Overall Width, Steel, Antique Brass, BHMA A138.18, For Interior Residential Doors National Hardware Door Hinge, Non-Swaged, Weldable, Series: 560, 0.12 in Leaf Thickness, 3-1/2 in Door Leaf Length, 3-1/2 in Frame Leaf Length, Non-Removable Pin, 0.51 in Diameter Pin, Surface Mounting, 110 lb Load Capacity, 3-1/2 in Overall Width, Cold Rolled Steel, Plain Steel, For Surface Application By Welding
T-HINGE LD STEEL 6IN ZINC PLTD National Hardware N189-720 Round Corner Door Hinge National Hardware N265-355 Flush/Full Inset Continuous Hinge
For use on tool boxes, storage chests and small shed doors. National Hardware Door Hinge, Round Corner, Series: V512R58, Knuckle Bearing, 0.272 in Hole Diameter, 0.08 in Leaf Thickness, 3-1/2 in Door Leaf Length, 3-1/2 in Frame Leaf Length, Removable Pin, 0.234 in Diameter Pin, Wall Mounting, Fasteners: NO 9 Flat Head Screw, 50 lb Load Capacity, 3-1/2 in Overall Width, Steel, Satin Brass National Hardware Continuous Hinge, Flush/Full Inset, Series: V570, 12 in Door Leaf Length, 12 in Frame Leaf Length, Friction, Removable Pin, 0.9 in Diameter Pin, Steel Pin, Surface Mounting, Fasteners: NO 4 X 1/2 in Screw, 1-1/16 in Overall Width, Cold Rolled Steel, Brass, For Residential Applications
National Hardware N265-371 Flush/Full Inset Continuous Hinge Mintcraft LR085 Bolt Hook HINGE WELDING PLN STL 4X4IN
National Hardware Continuous Hinge, Flush/Full Inset, Series: V570, 12 in Door Leaf Length, 12 in Frame Leaf Length, Friction, Removable Pin, 0.9 in Diameter Pin, Steel Pin, Surface Mounting, Fasteners: NO 4 X 1/2 in Screw, 1-1/16 in Overall Width, Cold Rolled Steel, Nickel Plated, For Residential Applications Can be used with gate strap hinges to support wooden gates and fences. Can be easily adjusted. For use on cabinets and lightweight doors.  5 knuckles.
National Hardware V535 Door Hinge Closetmaid 26605 Support Bracket National Hardware N186-908 Square Corner Door Hinge
National Hardware Door Hinge, Series: V535, Suitable For Use With: Bi-Fold Doors, 3-1/2 in Door Leaf Length, 3-1/2 in Frame Leaf Length, Removable, Tight, Non-Rising Pin, Surface Mounting, 3-1/2 in Overall Width, Steel, Brass, For Residential Applications Preloaded with #8 pin drive and anchors. No.6606, 71925 and No. 21775. - For Organizer, Wardrobe, SuperSlide and Close Mesh Shelves 12" in depth; and Wardrobe or hanging SuperSlide shelves 16" in depth. No. 26607, 71924, and No.21776 - For Organizer, SuperSlide (in storage application), and Close Mesh shelves 16" in depth. No.26605 - For Organizer, Wardrobe, SuperSlide and Close Mesh Shelves 20" in depth. National Hardware Door Hinge, Full Mortise, Square Corner, Series: V512, Knuckle Bearing, 6 Holes, 0.272 in Hole Diameter, 0.08 in Leaf Thickness, 3 in Door Leaf Length, 3 in Frame Leaf Length, Removable Pin, 0.234 in Diameter Pin, Wall Mounting, Fasteners: (5) Knuckles, NO 9 Flat Head Screws, 50 lb Load Capacity, 3 in Overall Width, Steel
National Hardware N265-363 Flush/Full Inset Continuous Hinge National Hardware N265-389 Flush/Full Inset Continuous Hinge HOOK SCREW/HINGE STRAP 6IN
National Hardware Continuous Hinge, Flush/Full Inset, Series: V570, 12 in Door Leaf Length, 12 in Frame Leaf Length, Friction, Removable Pin, 0.9 in Diameter Pin, Steel Pin, Surface Mounting, Fasteners: NO 4 X 1/2 in Screw, 1-1/2 in Overall Width, Cold Rolled Steel, Brass, For Residential Applications National Hardware Continuous Hinge, Flush/Full Inset, Series: V570, 12 in Door Leaf Length, 12 in Frame Leaf Length, Friction, Removable Pin, 0.9 in Diameter Pin, Steel Pin, Surface Mounting, Fasteners: NO 4 X 1/2 in Screw, 1-1/2 in Overall Width, Cold Rolled Steel, Nickel Plated, For Residential Applications Replaces worn or broken bolt hooks.  Can be used with strap hinges
T-HINGE STL FXPIN LD 4 IN GALV Closetmaid 6606 Support Bracket Stanley 130179 Screw Hook
Used for interior or exterior applications. Rust-resistant. Preloaded with #8 pin drive and anchors. No.6606, 71925 and No. 21775. - For Organizer, Wardrobe, SuperSlide and Close Mesh Shelves 12" in depth; and Wardrobe or hanging SuperSlide shelves 16" in depth. No. 26607, 71924, and No.21776 - For Organizer, SuperSlide (in storage application), and Close Mesh shelves 16" in depth. No.26605 - For Organizer, Wardrobe, SuperSlide and Close Mesh Shelves 20" in depth. For use with new installations with Stanley's 130732, 131102, 248047, 131060, 130765, and 130799 hinge straps. Adjusts to correct gate sag.
National Hardware V535 Door Hinge HINGE UTILITY SQ CNR GALV 4X4 HOOK SCREW/HINGE STRAP 8IN
National Hardware Door Hinge, Series: V535, Suitable For Use With: Bi-Fold Doors, 4 in Door Leaf Length, 4 in Frame Leaf Length, Removable, Tight, Non-Rising Pin, Surface Mounting, 4 in Overall Width, Steel, Brass Five knuckle full mortise design. Allows easy installation or removal of lightweight doors. Screws included. Replaces worn or broken bolt hooks.  Can be used with strap hinges
National Hardware N241-208 Square Corner Door Hinge T-HINGE STL FIXPIN HD 4IN BLK HINGE DR 5/8RD 4X4IN SAT NIC
DOOR HINGES 4IN BLK
Our Price: $7.98
National Hardware Door Hinge, Full Mortise, Square Corner, Series: V512, Knuckle Bearing, 6 Holes, 0.272 in Hole Diameter, 0.08 in Leaf Thickness, 4 in Door Leaf Length, 4 in Frame Leaf Length, Removable Pin, 0.234 in Diameter Pin, Wall Mounting, Fasteners: (5) Knuckles, NO 9 Flat Head Screws, 55 lb Load Capacity, 4 in Overall Width, Steel, Black 2.2mm thickness, 5-knuckle, loose pin.
HINGE STANDARD WGT PCW 3-1/2IN HINGE DR SQ 4X4IN PLT BRT BRS National Hardware S808-071 Square Corner Door Hinge
Five knuckle, for use on internal or external doors of medium weight and average frequency. Commercial grade with thicker gauge and more durable design than standard hinges. Template screw hole location for use on either wood or hollow metal doors and frames. Equipped with easily seated, non-rising removable pins. Conforms to ANSI/BHMA Grade 3. Includes wood & machine screws. 2.2mm thickness, 5-knuckle. Screws included. National Hardware Door Hinge, Full Mortise, Square Corner, Series: V8027, Knuckle Bearing, 0.088 in Leaf Thickness, 3-1/2 in Door Leaf Length, 3-1/2 in Frame Leaf Length, Non-Rising, Removable Pin, Wall Mounting, Fasteners: (5) Knuckles, NO 9 Flat Head Screws, 3-1/2 in Overall Width, Steel, Antique Pewter, For Residential Doors
National Hardware S808-170 Round Corner Door Hinge National Hardware S808-204 Round Corner Door Hinge Stanley 131375 Pintle
National Hardware Door Hinge, Full Mortise, Round Corner, Series: V8030, Knuckle Bearing, 0.088 in Leaf Thickness, 3-1/2 in Door Leaf Length, 3-1/2 in Frame Leaf Length, Non-Rising, Removable Pin, Wall Mounting, Fasteners: (5) Knuckles, NO 9 Flat Head Screws, 3-1/2 in Overall Width, Steel, Antique Brass, For Residential Doors National Hardware Door Hinge, Full Mortise, Round Corner, Series: V8030, Knuckle Bearing, 0.088 in Leaf Thickness, 3-1/2 in Door Leaf Length, 3-1/2 in Frame Leaf Length, Non-Rising, Removable Pin, Wall Mounting, Fasteners: (5) Knuckles, NO 9 Flat Head Screws, 3-1/2 in Overall Width, Steel, Satin Nickel, For Residential Doors Designed for use with Stanley's 130732, 131102, 248047, 131060, 248039, 130765, 168336, and 130799 hinge straps. Gate can be easily lifted off of pintle. Designed for heavy-duty gates and doors. Pintle punched for 5/16" (1/2" size) or 3/8" (5/8" size) bolts.
HINGE DR 5/8RD 4X4IN BRT BRS  HINGE DR SQ 3.5X3.5IN BRT CHRM HINGE DR SQ 3.5X3.5IN BRT BRS
2.2mm thickness, 5-knuckle, loose pin. 2.2mm thickness, 5-knuckle. Screws included. 2.2mm thickness, 5-knuckle. Screws included.
HINGE DR SQ 3.5X3.5IN SAT BRS National Hardware 286BC Extra Heavy Flush/Full Inset T Hinge HINGE DR RD 3.5X3.5IN SAT CHRM
T HINGES 8IN ZN PLT
Our Price: $8.41
2.2mm thickness, 5-knuckle. Screws included. National Hardware T Hinge, Extra Heavy, Flush/Full Inset, Series: 286BC, 0.105 in Leaf Thickness, 8 in Door Leaf Length, 2.73 in Door Leaf Width, 5-1/2 in Frame Leaf Length, 2.3 in Frame Leaf Width, 0.388 in Diameter Pin, Wall Mounting, Fasteners: NO 12 Flat Head Screw, Hot Rolled Steel, Zinc Plated, BHMA A138.18, For Residential Applications 2.2mm thickness, 5-knuckle, loose pin.
HINGE DR RD 3.5X3.5IN SAT NIC HINGE DR SQ 3.5X3.5IN SAT CHRM Stanley 130732 Hinge Strap
2.2mm thickness, 5-knuckle, loose pin. 2.2mm thickness, 5-knuckle. Screws included. Designed for new installations with Stanley's 130708, 130559, 130583, and 130617 hooks. Strap punched for 5/16" (6" and 8" sizes) or 3/8" (10", 12", 14", 16" 18", 20" and 24" sizes) bolts.