Home > HARDWARE > BUILDERS HARDWARE > HINGES > SPRING HINGES
Choose a sub category:
DOOR HINGES DOOR HINGES DOOR HINGES
DOOR HINGES DOOR HINGES DOOR HINGES
DOOR HINGES BLANK HINGES BLANK HINGES
BLANK HINGES BLANK HINGES BLANK HINGES
BLANK HINGES BLANK HINGES DOOR HINGE PARTS
DOOR HINGE PARTS DOOR HINGE PARTS DOOR HINGE PARTS
DOOR HINGE PARTS DOOR HINGE PARTS DOOR HINGE PARTS
SPRING HINGES SPRING HINGES SPRING HINGES
SPRING HINGES SPRING HINGES SPRING HINGES
SPRING HINGES GRAVITY PIVOT HINGES GRAVITY PIVOT HINGES
GRAVITY PIVOT HINGES GRAVITY PIVOT HINGES GRAVITY PIVOT HINGES
GRAVITY PIVOT HINGES GRAVITY PIVOT HINGES CONTINUOUS HINGES
CONTINUOUS HINGES CONTINUOUS HINGES CONTINUOUS HINGES
CONTINUOUS HINGES CONTINUOUS HINGES CONTINUOUS HINGES
UTILITY HINGES UTILITY HINGES UTILITY HINGES
UTILITY HINGES UTILITY HINGES UTILITY HINGES
UTILITY HINGES STRAP HINGES STRAP HINGES
STRAP HINGES STRAP HINGES STRAP HINGES
STRAP HINGES STRAP HINGES TEE HINGES / T-HINGE
TEE HINGES / T-HINGE TEE HINGES / T-HINGE TEE HINGES / T-HINGE
TEE HINGES / T-HINGE TEE HINGES / T-HINGE TEE HINGES / T-HINGE
HOOK/STRAP HINGES HOOK/STRAP HINGES HOOK/STRAP HINGES
HOOK/STRAP HINGES HOOK/STRAP HINGES HOOK/STRAP HINGES
HOOK/STRAP HINGES
Sort By:
1
SUPPORT WHITE                 National Hardware N116-475 Shelf Support SUPPORT BRASS
SUPPORTS BRONZE
Our Price: $0.38
Used to support shelves. 1/4" diameter shank. Safe working load 25 lbs. Boxed loose. National Hardware Shelf Support, Series: 158, 0.62 in Width, 0.05 in Thickness, Steel, Bronze, 25 lb Load Capacity, Suitable For Use With: National 157 Shelf Standards, 0.14 in Hole Diameter, For Supporting Shelves Used to support shelves. Can be used with National 157 shelf standards. Safe working load 25 lbs. Boxed loose.
National Hardware N224-675 Shelf Support HINGE NRW ZINC PLATED 1-1/2IN HINGE NRW ZINC PLATED 1IN
SUPPORTS BRASS
Our Price: $0.44
National Hardware Shelf Support, Series: 159, 1/4 in Shank Diameter, 1.22 in Length, 1/2 in Width, 0.05 in Thickness, Steel, Brass, 25 lb Load Capacity, 0.16 in Hole Diameter, For Supporting Shelves 518. Swaged for mortise installations. Manufactured from cold-rolled steel, with non-removable steel pin. Tight pin to allow for left or right hand applications. Boxed loose. 518. Swaged for mortise installations. Manufactured from cold-rolled steel, with non-removable steel pin. Tight pin to allow for left or right hand applications. Boxed loose.
HOOK/EYE GATE STEEL 1-1/2IN   HOOK/EYE GATE STEEL 2 INCH    HOOK GATE SAFETY 2IN ZINC PLT
Can be used to latch gates or doors and to fasten screen or storm panel. Sharp points bites into wood easily. Can be used to latch gates or doors and to fasten screen or storm panel. Sharp points bites into wood easily. Can be used on cabinets, drawers and similar household items, to latch gates, doors and to fasten screen or storm doors. Sharp points bites into wood easily.
SuperSlide 948 Pre-Loaded Wall Bracket HOOK/EYE 1-1/2IN ZINC PLATE   T-HINGE ZINC PLATED 2IN
T HINGES 2IN ZN PLT
Our Price: $1.74
Secures shelf to side wall of closet. Pre-loaded with pins and anchors, no screws needed. Accommodates pole clips and shelf stops in "TotalSlide" system. Can be used to latch gates or doors and to fasten screen or storm panel. Sharp points bites into wood easily. Offset screw holes for extra strength and to prevent wood from splitting. Tight pin for left or right hand applications. Steel with aluminum pin. Safe working load: 18 lbs. Visual-pack.
HOOK/EYE GATE STEEL 3 INCH    HINGE NRW ZINC PLATED 1-1/2IN National Hardware 284BC Flush/Full Inset Light T Hinge
T HINGES 3IN ZN PLT
Our Price: $1.97
Can be used to latch gates or doors and to fasten screen or storm panel. Sharp points bites into wood easily. 518. Swaged for mortise installations. Manufactured from cold-rolled steel, with non-removable steel pin. Tight pin to allow for left or right hand applications. Boxed loose. National Hardware T Hinge, Flush/Full Inset, Light, Series: 284BC, 6 Holes, 0.21 in Hole Diameter, 0.056 in Leaf Thickness, 3 in Door Leaf Length, 0.69 in Frame Leaf Length, 2.24 in Frame Leaf Width, 0.17 in Diameter Pin, Aluminum Pin, Wall Mounting, Fasteners: NO 6 Flat Headed Screw, 18 lb Load Capacity, 2.34 in Overall Width, Hot Rolled Steel
HOOK/EYE GATE STEEL 2-1/2INCH HOOK GATE SAFETY 2-1/2IN ZINC HINGE STRAP ZINC PLATED 3IN
STRAP HINGES 3IN ZN PLT
Our Price: $2.03
Can be used to latch gates or doors and to fasten screen or storm panel. Sharp points bites into wood easily. Can be used on cabinets, drawers and similar household items, to latch gates, doors and to fasten screen or storm doors. Sharp points bites into wood easily. Offset screw holes for extra strength and to prevent wood from splitting. Tight pin for left or right hand applications. Steel with aluminum pin. Safe working load: 18 lbs. Boxed loose.
National Hardware V2000 Hook and Eye National Hardware V2000 Hook and Eye HINGE NRW ZINC PLATED 2IN
National Hardware Hook and Eye, Series: V2000, 1 in Length, Steel, Zinc Plated, BHMA A138.18, For Interior and Exterior Applications National Hardware Hook and Eye, Series: V2000, 1-1/2 in Length, 0.19 in Eye/Staple, Steel, Zinc Plated, BHMA A138.18, For Interior and Exterior Applications 518. Swaged for mortise installations. Manufactured from cold-rolled steel, with non-removable steel pin. Tight pin to allow for left or right hand applications. Boxed loose.
National Hardware V2000 Hook and Eye National Hardware V2000 Hook and Eye National Hardware V2000 Hook and Eye
National Hardware Hook and Eye, Series: V2000, 2 in Length, Steel, Zinc Plated, BHMA A138.18, For Interior and Exterior Applications National Hardware Hook and Eye, Series: V2000, 2-1/2 in Length, Steel, Zinc Plated, BHMA A138.18, For Interior and Exterior Applications National Hardware Hook and Eye, Series: V2000, 3 in Length, Steel, Zinc Plated, BHMA A138.18, For Interior and Exterior Applications
National Hardware V2002 Safety Hook and Eye National Hardware V2002 Safety Hook and Eye BRACKET SHELF HD WHITE 8IN
National Hardware Safety Hook and Eye, Series: V2002, 2 in Length, Steel, Zinc Plated, Includes: Mounting Screws, BHMA A138.18, For Interior and Exterior Applications National Hardware Safety Hook and Eye, Series: V2002, 2-1/2 in Length, Steel, Zinc Plated, Includes: Mounting Screws, BHMA A138.18, For Interior and Exterior Applications Dimensions: 1/16"W x 2-3/8"H x selected depth. For use with Pro Source shelving. UPC tagged.
HINGE NRW ZINC PLATED 2-1/2IN Knape & Vogt 180 Regular Duty Shelf Bracket Knape & Vogt 180 Boltless Regular Duty Shelf Bracket
518. Swaged for mortise installations. Manufactured from cold-rolled steel, with non-removable steel pin. Tight pin to allow for left or right hand applications. Boxed loose. For use with the 80 Series standards. For shelving applications in light industrial, commercial, and residential use. Standards can be mounted to nearly any type of wall. For storage and display applications in retail stores, grocery stores, light warehouses, repair garages, maintenance storage, business office storage, and residential storage. Reinforced brackets lock into slotted standards for strong, secure weight-bearing support. Fully adjustable in 1" increments. 16-gauge cold rolled steel construction. Tested to meet or exceed ANSI performance standards as established by BHMA. For use with the 80 Series standards. For shelving applications in light industrial, commercial, and residential use. Standards can be mounted to nearly any type of wall. For storage and display applications in retail stores, grocery stores, light warehouses, repair garages, maintenance storage, business office storage, and residential storage. Reinforced brackets lock into slotted standards for strong, secure weight-bearing support. Fully adjustable in 1" increments. 16-gauge cold rolled steel construction. Tested to meet or exceed ANSI performance standards as established by BHMA.
Knape & Vogt BK-0101 Shelf Bracket Prime Line U 9335 Spoon Shelf Support Peg HINGE UTILITY STEEL 2X2IN ZN
Designed to fit into the fast mount standards, load tested to 100 lbs. For use with cabinets and storage cabinets with glass shelves. Five knuckle full mortise design. Allows easy installation or removal of lightweight doors. Screws included.
Knape & Vogt 180 Regular Duty Shelf Bracket T-HINGE ZINC PLATED 4IN       Closetmaid 1164XBJ Support Bracket
T HINGES 4IN ZN PLT
Our Price: $2.50
For use with the 80 Series standards. For shelving applications in light industrial, commercial, and residential use. Standards can be mounted to nearly any type of wall. For storage and display applications in retail stores, grocery stores, light warehouses, repair garages, maintenance storage, business office storage, and residential storage. Reinforced brackets lock into slotted standards for strong, secure weight-bearing support. Fully adjustable in 1" increments. 16-gauge cold rolled steel construction. Tested to meet or exceed ANSI performance standards as established by BHMA. Offset screw holes for extra strength and to prevent wood from splitting. Tight pin for left or right hand applications. Steel with aluminum pin. Safe working load: 18 lbs. Visual-pack. Closetmaid Support Bracket, 12 in Length, 2 in Width, 2 in Depth, Steel, Epoxy Coated, White, Suitable For Use With: Wire Shelving, Includes: (2) Brackets, (2) Anchors, (2) NO 8 Pins
HINGE UTL STL ZN PLTD 1INX1IN HINGE UTILITY SQ CNR 2X1-1/2IN Knape & Vogt 180 Boltless Regular Duty Shelf Bracket
Lightweight steel construction. 3 Knuckles. Lightweight steel construction. 3 Knuckles. For use with the 80 Series standards. For shelving applications in light industrial, commercial, and residential use. Standards can be mounted to nearly any type of wall. For storage and display applications in retail stores, grocery stores, light warehouses, repair garages, maintenance storage, business office storage, and residential storage. Reinforced brackets lock into slotted standards for strong, secure weight-bearing support. Fully adjustable in 1" increments. 16-gauge cold rolled steel construction. Tested to meet or exceed ANSI performance standards as established by BHMA.
Knape & Vogt 180 Boltless Regular Duty Shelf Bracket Knape & Vogt 180 Regular Duty Shelf Bracket National Hardware V2000 Hook and Eye
For use with the 80 Series standards. For shelving applications in light industrial, commercial, and residential use. Standards can be mounted to nearly any type of wall. For storage and display applications in retail stores, grocery stores, light warehouses, repair garages, maintenance storage, business office storage, and residential storage. Reinforced brackets lock into slotted standards for strong, secure weight-bearing support. Fully adjustable in 1" increments. 16-gauge cold rolled steel construction. Tested to meet or exceed ANSI performance standards as established by BHMA. For use with the 80 Series standards. For shelving applications in light industrial, commercial, and residential use. Standards can be mounted to nearly any type of wall. For storage and display applications in retail stores, grocery stores, light warehouses, repair garages, maintenance storage, business office storage, and residential storage. Reinforced brackets lock into slotted standards for strong, secure weight-bearing support. Fully adjustable in 1" increments. 16-gauge cold rolled steel construction. Tested to meet or exceed ANSI performance standards as established by BHMA. National Hardware Hook and Eye, Series: V2000, 4 in Length, Steel, Zinc Plated, BHMA A138.18, For Interior and Exterior Applications
Knape & Vogt 180 Regular Duty Shelf Bracket Knape & Vogt 180 Boltless Regular Duty Shelf Bracket Knape & Vogt 180 Boltless Regular Duty Shelf Bracket
For use with the 80 Series standards. For shelving applications in light industrial, commercial, and residential use. Standards can be mounted to nearly any type of wall. For storage and display applications in retail stores, grocery stores, light warehouses, repair garages, maintenance storage, business office storage, and residential storage. Reinforced brackets lock into slotted standards for strong, secure weight-bearing support. Fully adjustable in 1" increments. 16-gauge cold rolled steel construction. Tested to meet or exceed ANSI performance standards as established by BHMA. For use with the 80 Series standards. For shelving applications in light industrial, commercial, and residential use. Standards can be mounted to nearly any type of wall. For storage and display applications in retail stores, grocery stores, light warehouses, repair garages, maintenance storage, business office storage, and residential storage. Reinforced brackets lock into slotted standards for strong, secure weight-bearing support. Fully adjustable in 1" increments. 16-gauge cold rolled steel construction. Tested to meet or exceed ANSI performance standards as established by BHMA. For use with the 80 Series standards. For shelving applications in light industrial, commercial, and residential use. Standards can be mounted to nearly any type of wall. For storage and display applications in retail stores, grocery stores, light warehouses, repair garages, maintenance storage, business office storage, and residential storage. Reinforced brackets lock into slotted standards for strong, secure weight-bearing support. Fully adjustable in 1" increments. 16-gauge cold rolled steel construction. Tested to meet or exceed ANSI performance standards as established by BHMA.
Knape & Vogt 180 Boltless Regular Duty Shelf Bracket Knape & Vogt 180 Regular Duty Shelf Bracket HINGE NRW ZINC PLATED 3IN
For use with the 80 Series standards. For shelving applications in light industrial, commercial, and residential use. Standards can be mounted to nearly any type of wall. For storage and display applications in retail stores, grocery stores, light warehouses, repair garages, maintenance storage, business office storage, and residential storage. Reinforced brackets lock into slotted standards for strong, secure weight-bearing support. Fully adjustable in 1" increments. 16-gauge cold rolled steel construction. Tested to meet or exceed ANSI performance standards as established by BHMA. For use with the 80 Series standards. For shelving applications in light industrial, commercial, and residential use. Standards can be mounted to nearly any type of wall. For storage and display applications in retail stores, grocery stores, light warehouses, repair garages, maintenance storage, business office storage, and residential storage. Reinforced brackets lock into slotted standards for strong, secure weight-bearing support. Fully adjustable in 1" increments. 16-gauge cold rolled steel construction. Tested to meet or exceed ANSI performance standards as established by BHMA. 518. Swaged for mortise installations. Manufactured from cold-rolled steel, with non-removable steel pin. Tight pin to allow for left or right hand applications. Boxed loose.
HINGE UTL ZN PLT 1-1/2X1-3/8IN SuperSlide 6609 Pre-Loaded Wall Bracket Knape & Vogt 180 Regular Duty Shelf Bracket
Lightweight steel construction. 3 Knuckles. Heavy duty preloaded wall bracket with anchor, mounts to the side wall and holds the end of the SuperSlide shelf and Hang Rod. Supports front lip of shelving and hang rod where they meet the side wall. With pre-loaded pins. For drywall installations. 4.125"H x 1.75"W x 2"D. Material: Resin. For use with the 80 Series standards. For shelving applications in light industrial, commercial, and residential use. Standards can be mounted to nearly any type of wall. For storage and display applications in retail stores, grocery stores, light warehouses, repair garages, maintenance storage, business office storage, and residential storage. Reinforced brackets lock into slotted standards for strong, secure weight-bearing support. Fully adjustable in 1" increments. 16-gauge cold rolled steel construction. Tested to meet or exceed ANSI performance standards as established by BHMA.
Knape & Vogt 180 Regular Duty Shelf Bracket HOOK/EYE 4 INCH ZINC PLATE    Knape & Vogt 182 Bracket
For use with the 80 Series standards. For shelving applications in light industrial, commercial, and residential use. Standards can be mounted to nearly any type of wall. For storage and display applications in retail stores, grocery stores, light warehouses, repair garages, maintenance storage, business office storage, and residential storage. Reinforced brackets lock into slotted standards for strong, secure weight-bearing support. Fully adjustable in 1" increments. 16-gauge cold rolled steel construction. Tested to meet or exceed ANSI performance standards as established by BHMA. Can be used to latch gates or doors and to fasten screen or storm panel. Sharp points bites into wood easily. Double-lug bracket design prevents shelves and contents from falling when bumped. Supports adjust to accommodate changes in storage and layout. Rounded corners and recessed groove design. Cover strips conceal screw holes and slots for a more refined appearance. Epoxy finish is resistant to chips and scratches.
HINGE STRAP STEEL LD 2IN ZINC T-HINGE LD STEEL 2IN ZINC PLTD Closetmaid 6610 Wall Clip
Use in both the interior and exterior. Screws included. For use on tool boxes, storage chests and small shed doors. Anchors shelf to wall. Ensures stability of shelf.
Prime Line U 9337 Spoon Shelf Support Peg HOOK/EYE GATE ZINC PLATED 4IN National Hardware V2001 Hook and Eye
For use with cabinets and storage cabinets with glass shelves. Designed for securing gates and doors on farm and utility buildings. Sharp points staples for easy and quick installation. For interior and exterior applications. Visual-pack. National Hardware Hook and Eye, Series: V2001, 2 in Length, Solid Brass, Solid Brass, BHMA A138.18, For Interior and Exterior Applications
Knape & Vogt 180 Boltless Regular Duty Shelf Bracket Knape & Vogt 180 Boltless Regular Duty Shelf Bracket Knape & Vogt 180 Boltless Regular Duty Shelf Bracket
For use with the 80 Series standards. For shelving applications in light industrial, commercial, and residential use. Standards can be mounted to nearly any type of wall. For storage and display applications in retail stores, grocery stores, light warehouses, repair garages, maintenance storage, business office storage, and residential storage. Reinforced brackets lock into slotted standards for strong, secure weight-bearing support. Fully adjustable in 1" increments. 16-gauge cold rolled steel construction. Tested to meet or exceed ANSI performance standards as established by BHMA. For use with the 80 Series standards. For shelving applications in light industrial, commercial, and residential use. Standards can be mounted to nearly any type of wall. For storage and display applications in retail stores, grocery stores, light warehouses, repair garages, maintenance storage, business office storage, and residential storage. Reinforced brackets lock into slotted standards for strong, secure weight-bearing support. Fully adjustable in 1" increments. 16-gauge cold rolled steel construction. Tested to meet or exceed ANSI performance standards as established by BHMA. For use with the 80 Series standards. For shelving applications in light industrial, commercial, and residential use. Standards can be mounted to nearly any type of wall. For storage and display applications in retail stores, grocery stores, light warehouses, repair garages, maintenance storage, business office storage, and residential storage. Reinforced brackets lock into slotted standards for strong, secure weight-bearing support. Fully adjustable in 1" increments. 16-gauge cold rolled steel construction. Tested to meet or exceed ANSI performance standards as established by BHMA.
HINGE UTL SQ CNR ZN STL 1X1IN Knape & Vogt 180 Regular Duty Shelf Bracket Prime Line U 9116 Spoon Shelf Support Peg
Five knuckle full mortise design. Allows easy installation or removal of lightweight cabinet doors. Screws included. For use with the 80 Series standards. For shelving applications in light industrial, commercial, and residential use. Standards can be mounted to nearly any type of wall. For storage and display applications in retail stores, grocery stores, light warehouses, repair garages, maintenance storage, business office storage, and residential storage. Reinforced brackets lock into slotted standards for strong, secure weight-bearing support. Fully adjustable in 1" increments. 16-gauge cold rolled steel construction. Tested to meet or exceed ANSI performance standards as established by BHMA. For use with cabinets and storage cabinets with glass shelves.
Prime Line U 9150 Spoon Shelf Support Peg Prime Line U 9360 Shelf Support Peg Knape & Vogt 182 Adjustable Twin Slot Bracket
For use with cabinets and storage cabinets with glass shelves. Mini-style frequently used in stereo and display cabinets. 1/2"D support, 5mm OD x 3/8"L peg. 12 lbs. per peg maximum safe-weight load. Double-lug bracket design prevents shelves and contents from falling when bumped. Supports adjust to accommodate changes in storage and layout. Rounded corners and recessed groove design. Cover strips conceal screw holes and slots for a more refined appearance. Epoxy finish is resistant to chips and scratches.
SUPPORT WHITE                 HINGE STRAP ZINC PLATED 5IN   T-HINGE ZINC PLATED 5IN
STRAP HINGES 5IN ZN PLT
Our Price: $3.20
T HINGES 5IN ZN PLT
Our Price: $3.20
Used to support shelves. 1/4" diameter shank. Safe working load 25 lbs. Boxed loose. Offset screw holes for extra strength and to prevent wood from splitting. Tight pin for left or right hand applications. Steel with aluminum pin. Safe working load: 18 lbs. Boxed loose. Offset screw holes for extra strength and to prevent wood from splitting. Tight pin for left or right hand applications. Steel with aluminum pin. Safe working load: 18 lbs. Visual-pack.
Knape & Vogt 182 Bracket Closetmaid 1002 Joiner Plate SuperSlide 5655 Closet Rod Support
Double-lug bracket design prevents shelves and contents from falling when bumped. Supports adjust to accommodate changes in storage and layout. Rounded corners and recessed groove design. Cover strips conceal screw holes and slots for a more refined appearance. Epoxy finish is resistant to chips and scratches. Use to join 2 shelves together to create a continuous run of shelving. Supports the joining of 2 wire shelves. One set consists of 2 joiner plates, 1 bolt and 1 nut. NOT for use with Close Mesh shelving. 1.19?H x 2.25?W x 1.13?D. Material: Resin. Converts shelf & rod shelving to a continous slide. Hang rod snaps into bracket to create an continuous slide for hangers. Snaps onto SuperSlide shelf to support hang rod. Use one every 36 in. (91,44cm) of hang rod and at each end of shelf and hang rod. 5.75"H x 0.87"W x 3.87"D. Material: Resin.
Knape & Vogt 256PZC Adjustable Pilaster Shelf Support HINGE WELDING PLN STL 2X2IN   Prime Line U 9147 Shelf Support Peg
Snaps securely into place. For use with No. 233 and No. 255. High strength steel. For use on cabinets and lightweight doors.  5 knuckles. 1/4" diameter peg and support a maximum safe load of 5 lb. Used to support cabinet shelves.
Stanley 139659 Door Hinge National Hardware V2000 Hook and Eye HINGE UTILITY 2-1/2X2-1/2IN ZN
504. Designed for general utility and industrial applications. Hinges are swaged for mortise installations. Loose pin allows doors to be removed without taking off hinges. Plain steel version can be welded. Boxed. National Hardware Hook and Eye, Series: V2000, 6 in Length, Steel, Zinc Plated, BHMA A138.18, For Interior and Exterior Applications Five knuckle full mortise design. Allows easy installation or removal of lightweight doors. Screws included.
HINGE UTL SQ CNR ZN PLT 3X2IN Knape & Vogt 335P PLAS Shelf Support Pin HINGE BRD PLN STL 2IN
Lightweight steel construction. 3 Knuckles. 1/4" diameter x 7/16"L pin. Polybagged. 505. Swaged for mortise installations. Manufactured with cold rolled steel. Five knuckle, full mortise design. Riveted, non-removable pin. Boxed loose barcoded.
HOOK/EYE SOLID BRASS 1-1/2IN  HINGE SURFACE PLAIN STEEL 2IN Knape & Vogt 182 Twin Slot Bracket
Can be use to latch gates or doors and to fasten screen or storm panels. Sharp points bites into wood easily. National Hardware Door Hinge, Non-Swaged, Tight Pin, Surface Mount, 70 lb, 2 in Overall Length, Cold-Rolled Steel, For Surface Application Double-lug bracket design prevents shelves and contents from falling when bumped. Supports adjust to accommodate changes in storage and layout. Rounded corners and recessed groove design. Cover strips conceal screw holes and slots for a more refined appearance. Epoxy finish is resistant to chips and scratches.
Knape & Vogt 182 Adjustable Twin Slot Bracket SUPPORT ZINC PLATED           HINGE SURFACE PLN STL 2IN
Double-lug bracket design prevents shelves and contents from falling when bumped. Supports adjust to accommodate changes in storage and layout. Rounded corners and recessed groove design. Cover strips conceal screw holes and slots for a more refined appearance. Epoxy finish is resistant to chips and scratches. Used to support shelves. 1/4" diameter shank. Safe working load 25 lbs. Visual-pack. Non-swaged hinge for surface application by welding. Manufactured with cold rolled steel. Five knuckle, full mortise design. Tight pin for more secure applications. Safe working load: 70 lbs. Boxed loose.
SUPPORT BRONZE                Knape & Vogt 182 Adjustable Twin Slot Bracket Prime Line U 9302 Shelf Support Peg
Used to support shelves. Can be used with National 157 shelf standards. Safe working load: 70 lbs. Visual-pack. Double-lug bracket design prevents shelves and contents from falling when bumped. Supports adjust to accommodate changes in storage and layout. Rounded corners and recessed groove design. Cover strips conceal screw holes and slots for a more refined appearance. Epoxy finish is resistant to chips and scratches. 3mm diameter peg and support a maximum safe load of 10 lb. Used to support cabinet shelves.
SuperSlide 75651 Closet Rod Connector Closetmaid 6620 Wall Bracket National Hardware V2001 Hook and Eye
Use with SuperSlide shelving to create uninterrupted sliding action around corners for walk-in closets. Keeps hangers from sliding off exposed ends. Support the connection of the two pieces of hang rod with a hang bar support. 2"H x 0.5"W x 0.5"D. Material: Plastic. Heavy duty preloaded bracket with anchor easily mounts to the wall and holds the end of any size ClosetMaid shelf. Provides side wall support. Supports front lip of shelving where it meets the side wall. For drywall installations. Includes: 2.875"H x 2.125"W x 1.75"D. Material: Resin. National Hardware Hook and Eye, Series: V2001, 2-1/2 in Length, Solid Brass, Solid Brass, BHMA A138.18, For Interior and Exterior Applications
HINGE STRAP ZINC PLATED 6IN   T-HINGE ZINC PLATED 6IN       HINGE BRD ZINC PLATED 2IN
STRAP HINGES 6IN ZN PLT
Our Price: $3.71
T HINGES 6IN ZN PLT
Our Price: $3.74
BROAD HINGES 2IN ZN PLT
Our Price: $3.77
Offset screw holes for extra strength and to prevent wood from splitting. Tight pin for left or right hand applications. Steel with aluminum pin. Safe working load: 18 lbs. Boxed loose. Offset screw holes for extra strength and to prevent wood from splitting. Tight pin for left or right hand applications. Steel with aluminum pin. Safe working load: 18 lbs. Visual-pack. 504. Swaged for mortise installations. Manufactured with cold rolled steel. Five knuckle, full mortise design. Loose pin allows doors to be removed without removing hinge. Boxed loose barcoded.
HINGE UTL SQ CNR Z 1-1/2X1-3/8 HOOK/EYE SOLID BRASS 2 INCH   Knape & Vogt 182 Twin Slot Bracket
Five knuckle full mortise design. Allows easy installation or removal of lightweight cabinet doors. Screws included. Can be use to latch gates or doors and to fasten screen or storm panels. Sharp points bites into wood easily. Double-lug bracket design prevents shelves and contents from falling when bumped. Supports adjust to accommodate changes in storage and layout. Rounded corners and recessed groove design. Cover strips conceal screw holes and slots for a more refined appearance. Epoxy finish is resistant to chips and scratches.
HINGE BRD ZINC PLATED 2IN     HINGE UTL SQ CNR ZN 2X1-1/2IN National Hardware N145-920 Flush/Full Inset Square Corner Narrow Hinge
BROAD HINGES 2IN ZN PLT
Our Price: $3.88
National Hardware Door Hinge, Series: 505BC, Full Mortise, 4 Holes, 0.3125 in Hole Diameter, 0.77 in Leaf Thickness, Non-Removable, Riveted Pin, 0.19 in Dia Pin, Fasteners: 5-Knuckle, 38 lb Load Capacity, 2 in Overall Length, 2 in Overall Width, Cold Rolled Steel, Zinc Plated, Standards: BHMA A138.18 Five knuckle full mortise design. Allows easy installation or removal of lightweight cabinet doors. Screws included. National Hardware Narrow Hinge, Flush/Full Inset, Square Corner, Series: V518, 4 Holes, 0.16 in Hole Diameter, 0.05 in Leaf Thickness, 1 in Door Leaf Length, 1 in Frame Leaf Length, Non-Removable Pin, 0.1 in Diameter Pin, Steel Pin, Wall Mounting, Fasteners: Screws, 7 lb Load Capacity, 1 in Overall Width, Cold Rolled Steel, Zinc Plated
Knape & Vogt BK-0102 Shelf Bracket National Hardware V2003 Hook and Eye Closetmaid 1180 Support Bracket
HOOK AND EYES 3IN SS
Our Price: $3.97
Designed to fit into the fast mount standards. Load tested to 150 lbs. National Hardware Hook and Eye, Series: V2003, 3 in Length, Stainless Steel, BHMA A138.18, For Interior and Exterior Applications Closetmaid Support Bracket, 12 in Length, 2 in Width, 2 in Depth, Steel, Epoxy Coated, White, Suitable For Use With: Wire Shelving, Includes: (1) Support Bracket, (1) Anchor, (1) NO 8 Pin
HOOK/EYE GATE ZINC PLATED 6IN National Hardware V2001 Hook and Eye National Hardware V2001 Hook and Eye
Designed for securing gates and doors on farm and utility buildings. Sharp points staples for easy and quick installation. For interior and exterior applications. Visual-pack. National Hardware Hook and Eye, Series: V2001, 1 in Length, Solid Brass, Solid Brass, BHMA A138.18, For Interior and Exterior Applications National Hardware Hook and Eye, Series: V2001, 1-1/2 in Length, Solid Brass, Solid Brass, BHMA A138.18, For Interior and Exterior Applications
Knape & Vogt 182 Twin Slot Bracket HOOK/EYE GATE ZINC PLATED 5IN National Hardware V2001 Hook and Eye
Double-lug bracket design prevents shelves and contents from falling when bumped. Supports adjust to accommodate changes in storage and layout. Rounded corners and recessed groove design. Cover strips conceal screw holes and slots for a more refined appearance. Epoxy finish is resistant to chips and scratches. National Hardware Gate Hook, Series: V2102, 5 in Length, Steel, Zinc-Plated, For Interior/Exterior Use National Hardware Hook and Eye, Series: V2001, 3 in Length, Solid Brass, Solid Brass, BHMA A138.18, For Interior and Exterior Applications
HINGE UTL GALV 2-1/2X2-1/2IN  SuperSlide 6641 Wall Bracket Stanley 139733 Weldable Door Hinge
Five knuckle full mortise design. Allows easy installation or removal of lightweight doors. Screws included. Supports low profile SuperSlide shelving in a wall to wall installation. Includes: 2 wall brackets, 4 pins and 4 anchors. Use in conjunction with support brackets and wall clips for installing wire shelving. Suports front lip of shelving where it meets the side wall. 2"H x 2.19W x 1.75"D. Material: Resin 504. Designed for general utility and industrial applications. Hinges are swaged for mortise installations. Loose pin allows doors to be removed without taking off hinges. Plain steel version can be welded. Boxed.
National Hardware N146-043 Flush/Full Inset Square Corner Narrow Hinge HINGE STRAP STEEL LD 3IN ZINC National Hardware 282BC Flush/Full Inset Strap Hinge
STRAP HINGES 4IN ZN PLT
Our Price: $4.15
National Hardware Narrow Hinge, Flush/Full Inset, Square Corner, Series: V518, 4 Holes, 0.2 in Hole Diameter, 0.05 in Leaf Thickness, 1-1/2 in Door Leaf Length, 1-1/2 in Frame Leaf Length, Non-Removable Pin, 0.11 in Diameter Pin, Steel Pin, Wall Mounting, Fasteners: Screws, 7 lb Load Capacity, 1-1/2 in Overall Width, Cold Rolled Steel, Zinc Plated Use in both the interior and exterior. Screws included. National Hardware Strap Hinge, Flush/Full Inset, Heavy Duty, Series: 282BC, 0.28 in Hole Diameter, 0.08 in Leaf Thickness, 4 in Door Leaf Length, 1.61 in Door Leaf Width, 4 in Frame Leaf Length, 1.61 in Frame Leaf Width, 0.22 in Diameter Pin, Wall Mounting, 60 lb Load Capacity, 8 in Overall Width, Hot Rolled Steel, Zinc Plated, BHMA A138.18
Knape & Vogt 256 Adjustable Dimple Pilaster Support Knape & Vogt Designer 182 Shelf Bracket SHELF SUPPORT 1/4IN ZINC PLTD
Snaps securely into place. For use with No. 233 and No. 255. High strength steel. Double-lug bracket design prevents shelves and contents from falling when bumped. Supports adjust to accommodate changes in storage and layout. Rounded corners and recessed groove design. Cover strips conceal screw holes and slots for a more refined appearance. Epoxy finish is resistant to chips and scratches.
HINGE BRD ZINC PLATED 2-1/2IN Closetmaid 1001 Corner Support Bracket HOOK/EYE 6 INCH ZINC PLATE
504. Swaged for mortise installations. Manufactured with cold rolled steel. Five knuckle, full mortise design. Loose pin allows doors to be removed without removing hinge. Boxed loose barcoded. Supports front lip of shelving to keep it level where it meets another shelf in a corner. Snap in place design. For corner installations.  0.375?H x 5?W x 0.75?D. Material: steel, coated with epoxy. Can be used to latch gates or doors and to fasten screen or storm panel. Sharp points bites into wood easily.
HOOK/EYE STAINLESS STEEL 2IN  National Hardware V288 Hinge Hasp HINGE WELDING PLN STL 3X3IN
HINGE HASPS 3IN ZN PLT
Our Price: $4.24
Can be used to latch gates or doors and to fasten screen or storm panel. Sharp points bites into wood easily. National Hardware Hinge Hasp, Series: V288, 3/4 in Height Shackle, 5-1/4 in Length, 1-5/32 in Height, Hot Rolled Steel, Aluminum Pin, Zinc Plated, BHMA A138.18 Certified, 3 in, For Regular or Around the Corner Applications For use on cabinets and lightweight doors.  5 knuckles.
National Hardware N145-946 Flush/Full Inset Square Corner Narrow Hinge Stanley 139808 Door Hinge National Hardware N141-622 Narrow Hinge
NARROW HINGES 1IN BRS
Our Price: $4.27
NARROW HINGES 1IN BRS
Our Price: $4.33
National Hardware Narrow Hinge, Flush/Full Inset, Square Corner, Series: V518, 4 Holes, 0.16 in Hole Diameter, 0.05 in Leaf Thickness, 1 in Door Leaf Length, 1 in Frame Leaf Length, Non-Removable Pin, 0.1 in Diameter Pin, Steel Pin, Wall Mounting, Fasteners: Screws, 7 lb Load Capacity, 1 in Overall Width, Cold Rolled Steel, Brass 504. Designed for general utility and industrial applications. Hinges are swaged for mortise installations. Loose pin allows doors to be removed without taking off hinges. Plain steel version can be welded. Boxed. National Hardware Narrow Hinge, Full Mortise, Series: V508, Knuckle Bearing, 4 Holes, 0.16 in Hole Diameter, 0.05 in Leaf Thickness, 1 in Door Leaf Length, 1 in Frame Leaf Length, Removable Pin, 0.1 in Diameter Pin, Wall Mounting, Fasteners: (5) Knuckle, Screws, 7 lb Load Capacity, 1 in Overall Width, Cold Rolled Steel, Brass
HINGE SURFACE PLN STL 2-1/2IN HINGE BRD PLN STL 3IN         HINGE BRD ZINC PLATED 2-1/2IN
Non-swaged hinge for surface application by welding. Manufactured with cold rolled steel. Five knuckle, full mortise design. Tight pin for more secure applications. Safe working load: 70 lbs. Boxed loose. 505. Swaged for mortise installations. Manufactured with cold rolled steel. Five knuckle, full mortise design. Riveted, non-removable pin. Boxed loose barcoded. National Hardware Door Hinge, Series: 505BC, Full Mortise, 6 Holes, 0.23 in Hole Diameter, 0.09 in Leaf Thickness, Non-Removable, Riveted Pin, 0.21 in Dia Pin, Fasteners: 5-Knuckle, 43 lb Load Capacity, 2-1/2 in Overall Length, 2.61 in Overall Width, Cold Rolled Steel, Zinc Plated, Standards: BHMA A138.18
National Hardware V280 Flush/Full Inset Light Strap Hinge National Hardware 282BC Flush/Full Inset Strap Hinge National Hardware N146-159 Flush/Full Inset Square Corner Narrow Hinge
STRAP HINGES 2IN ZN PLT
Our Price: $4.41
STRAP HINGES 5IN ZN PLT
Our Price: $4.41
National Hardware Light Strap Hinge, Flush/Full Inset, Series: V280, 6 Holes, 0.05 in Leaf Thickness, 1-1/16 in Door Leaf Length, 2 in Door Leaf Width, 1-1/16 in Frame Leaf Length, 2 in Frame Leaf Width, Fixed Pin, 0.119 in Diameter Pin, Aluminum Pin, Wall Mounting, 18 lb Load Capacity, 3-3/4 in Overall Length, 1-1/16 in Overall Width, Zinc Plated National Hardware Strap Hinge, Flush/Full Inset, Heavy Duty, Series: 282BC, 0.09 in Leaf Thickness, 5 in Door Leaf Length, 1.85 in Door Leaf Width, 5 in Frame Leaf Length, 1.85 in Frame Leaf Width, 0.27 in Diameter Pin, Wall Mounting, 70 lb Load Capacity, 9.54 in Overall Width, Hot Rolled Steel, Zinc Plated, BHMA A138.18 National Hardware Narrow Hinge, Flush/Full Inset, Square Corner, Series: V518, 4 Holes, 0.23 in Hole Diameter, 0.06 in Leaf Thickness, 2 in Door Leaf Length, 2 in Frame Leaf Length, Non-Removable Pin, 0.12 in Diameter Pin, Steel Pin, Wall Mounting, Fasteners: Screws, 10 lb Load Capacity, 2 in Overall Width, Cold Rolled Steel, Zinc Plated
HINGE WELDING STL 2-1/2X2-1/2 National Hardware N146-068 Flush/Full Inset Square Corner Narrow Hinge National Hardware N146-258 Flush/Full Inset Square Corner Narrow Hinge
For use on cabinets and lightweight doors.  5 knuckles. National Hardware Narrow Hinge, Flush/Full Inset, Square Corner, Series: V518, 4 Holes, 0.2 in Hole Diameter, 0.05 in Leaf Thickness, 1-1/2 in Door Leaf Length, 1-1/2 in Frame Leaf Length, Non-Removable Pin, 0.11 in Diameter Pin, Steel Pin, Wall Mounting, Fasteners: Screws, 7 lb Load Capacity, 1-1/2 in Overall Width, Cold Rolled Steel, Dull Brass National Hardware Narrow Hinge, Flush/Full Inset, Square Corner, Series: V518, 6 Holes, 1/4 in Hole Diameter, 0.06 in Leaf Thickness, 2-1/2 in Door Leaf Length, 2-1/2 in Frame Leaf Length, Non-Removable Pin, 0.12 in Diameter Pin, Steel Pin, Wall Mounting, Fasteners: Screws, 20 lb Load Capacity, 2-1/2 in Overall Width, Cold Rolled Steel, Zinc Plated
National Hardware N141-739 Narrow Hinge HINGE UTILITY STEEL 3X3IN ZN  National Hardware N141-606 Narrow Hinge
National Hardware Narrow Hinge, Full Mortise, Series: V508, Knuckle Bearing, 4 Holes, 0.2 in Hole Diameter, 0.05 in Leaf Thickness, 1-1/2 in Door Leaf Length, 1-1/2 in Frame Leaf Length, Removable Pin, 0.11 in Diameter Pin, Wall Mounting, Fasteners: (5) Knuckle, Screws, 7 lb Load Capacity, 1.42 in Overall Width, Cold Rolled Steel, Zinc Plated Five knuckle full mortise design. Allows easy installation or removal of lightweight doors. Screws included. National Hardware Narrow Hinge, Full Mortise, Series: V508, Knuckle Bearing, 4 Holes, 0.16 in Hole Diameter, 0.05 in Leaf Thickness, 1 in Door Leaf Length, 1 in Frame Leaf Length, Removable Pin, 0.1 in Diameter Pin, Wall Mounting, Fasteners: (5) Knuckle, Screws, 7 lb Load Capacity, 1 in Overall Width, Cold Rolled Steel, Zinc Plated
Knape & Vogt 345 Shelf Support Knape & Vogt 345 Shelf Support Knape & Vogt 346 Shelf Support
For 5 mm drilled holes. Use with No.129 rubber cushion. 4.7 mm diameter x 5/16" L pin. Poly pack. For 5 mm drilled holes. Use with No.129 rubber cushion. 4.7 mm diameter x 5/16" L pin. Poly pack. Use with No. 129 rubber cushion. For 1/4" diameter holes x 3/8"L pin.
Knape & Vogt 346P BR Shelf Support HINGE STRAP STEEL LD 2IN GALV T-HINGE LD STEEL 3IN ZINC PLTD
Use with No. 129 rubber cushion. For 1/4" diameter holes x 3/8"L pin. Use in both the interior and exterior. Screws included. For use on tool boxes, storage chests and small shed doors.
Knape & Vogt Designer 182 Shelf Bracket National Hardware N141-838 Narrow Hinge Stanley 220814 Ceiling Hook
Double-lug bracket design prevents shelves and contents from falling when bumped. Supports adjust to accommodate changes in storage and layout. Rounded corners and recessed groove design. Cover strips conceal screw holes and slots for a more refined appearance. Epoxy finish is resistant to chips and scratches. National Hardware Narrow Hinge, Full Mortise, Series: V508, Knuckle Bearing, 4 Holes, 0.23 in Hole Diameter, 0.06 in Leaf Thickness, 2 in Door Leaf Length, 2 in Frame Leaf Length, Removable Pin, 0.12 in Diameter Pin, Wall Mounting, Fasteners: (5) Knuckle, Screws, 10 lb Load Capacity, 1.56 in Overall Width, Cold Rolled Steel, Zinc Plated Designed for marine and other outdoor projects. Medium weight to heavy weight. Lag screw threads. Non-magnetic.
HOOK/EYE GATE SOLID BRASS 4IN Knape & Vogt BK-0103-11 Shelf Bracket Stanley 139873 Door Hinge
National Hardware Hook and Eye, Series: V2001, 4 in Length, Solid Brass, For Interior/Exterior Use With fold out support for heavy duty loads. Load tested to 300 lbs. 504. Designed for general utility and industrial applications. Hinges are swaged for mortise installations. Loose pin allows doors to be removed without taking off hinges. Plain steel version can be welded. Boxed.
HINGE BRD PLN STL 3-1/2IN     National Hardware 560 Non-Swaged Weldable Door Hinge National Hardware V280 Flush/Full Inset Light Strap Hinge
STRAP HINGES 3IN ZN PLT
Our Price: $4.77
505. Swaged for mortise installations. Manufactured with cold rolled steel. Five knuckle, full mortise design. Riveted, non-removable pin. Boxed loose barcoded. National Hardware Door Hinge, Non-Swaged, Weldable, Series: 560, 0.11 in Leaf Thickness, 3 in Door Leaf Length, 3 in Frame Leaf Length, Non-Removable Pin, 1/2 in Diameter Pin, Surface Mounting, 90 lb Load Capacity, 3 in Overall Width, Cold Rolled Steel, Plain Steel, For Surface Application By Welding National Hardware Light Strap Hinge, Flush/Full Inset, Series: V280, 6 Holes, 0.056 in Leaf Thickness, 1-3/16 in Door Leaf Length, 3 in Door Leaf Width, 1-3/16 in Frame Leaf Length, 3 in Frame Leaf Width, Fixed Pin, 0.17 in Diameter Pin, Aluminum Pin, Wall Mounting, 5-11/16 in Overall Length, 1-3/16 in Overall Width, Hot Rolled Steel, Zinc Plated
T-HINGE LD STEEL 4IN ZINC PLTD National Hardware N146-175 Flush/Full Inset Square Corner Narrow Hinge Knape & Vogt BK-0102-14 Shelf Bracket
NARROW HINGES 2IN BRS
Our Price: $4.82
For use on tool boxes, storage chests and small shed doors. National Hardware Narrow Hinge, Flush/Full Inset, Square Corner, Series: V518, 4 Holes, 0.23 in Hole Diameter, 0.06 in Leaf Thickness, 2 in Door Leaf Length, 2 in Frame Leaf Length, Non-Removable Pin, 0.12 in Diameter Pin, Steel Pin, Wall Mounting, Fasteners: Screws, 10 lb Load Capacity, 2 in Overall Width, Cold Rolled Steel, Dull Brass Designed to fit into the fast mount standards. Load tested to 150 lbs.
Knape & Vogt Designer 182 Shelf Bracket HINGE UTL SQ CNR 2-1/2X1-11/16 National Hardware 286BC Extra Heavy Flush/Full Inset T Hinge
T HINGES 4IN ZN PLT
Our Price: $4.98
Double-lug bracket design prevents shelves and contents from falling when bumped. Supports adjust to accommodate changes in storage and layout. Rounded corners and recessed groove design. Cover strips conceal screw holes and slots for a more refined appearance. Epoxy finish is resistant to chips and scratches. Lightweight steel construction. 3 Knuckles. National Hardware T Hinge, Extra Heavy, Flush/Full Inset, Series: 286BC, 0.076 in Leaf Thickness, 4 in Door Leaf Length, 1.55 in Door Leaf Width, 3.3 in Frame Leaf Length, 1.32 in Frame Leaf Width, 0.222 in Diameter Pin, Wall Mounting, Fasteners: NO 9 Flat Head Screw, 60 lb Load Capacity, Hot Rolled Steel, Zinc Plated, BHMA A138.18
HINGE STRAP STEEL LD 3IN GALV HINGE UTL SQ CNR 2-1/2X1-11/16 HINGE BRD ZINC PLATED 3IN
BROAD HINGES 3IN ZN PLT
Our Price: $5.06
Use in both the interior and exterior. Screws included. Five knuckle full mortise design. Allows easy installation or removal of lightweight cabinet doors. Screws included. 504. Swaged for mortise installations. Manufactured with cold rolled steel. Five knuckle, full mortise design. Loose pin allows doors to be removed without removing hinge. Boxed loose barcoded.
National Hardware 282BC Flush/Full Inset Strap Hinge Knape & Vogt 0202-10PM Shelf Standard HINGE STRAP STEEL LD 4IN ZINC
STRAP HINGES 6IN ZN PLT
Our Price: $5.08
National Hardware Strap Hinge, Flush/Full Inset, Heavy Duty, Series: 282BC, 0.1 in Leaf Thickness, 6 in Door Leaf Length, 2.43 in Door Leaf Width, 6 in Frame Leaf Length, 2.43 in Frame Leaf Width, 0.32 in Diameter Pin, Wall Mounting, 85 lb Load Capacity, 11.47 in Overall Width, Hot Rolled Steel, Zinc Plated, BHMA A138.18 Knape & Vogt Shelf Standard, Heavy Duty, 10 in Length, 4.88 in Width, 3.88 in Depth Use in both the interior and exterior. Screws included.
National Hardware N141-754 Narrow Hinge HOOK/EYE GATE ZINC PLATED 6IN National Hardware 505BC Flush/Full Inset Broad Hinge
BROAD HINGES 3IN ZN PLT
Our Price: $5.15
National Hardware Narrow Hinge, Full Mortise, Series: V508, Knuckle Bearing, 4 Holes, 0.2 in Hole Diameter, 0.05 in Leaf Thickness, 1-1/2 in Door Leaf Length, 1-1/2 in Frame Leaf Length, Removable Pin, 0.11 in Diameter Pin, Wall Mounting, Fasteners: (5) Knuckle, Screws, 7 lb Load Capacity, 1.42 in Overall Width, Cold Rolled Steel, Brass National Hardware Gate Hook, Series: V2106, 6 in Length, Steel, Zinc-Plated National Hardware Broad Hinge, Flush/Full Inset, Series: 505BC, 6 Holes, 0.08 in Leaf Thickness, 3 in Door Leaf Length, 3 in Frame Leaf Length, Riveted, Non-Removable Pin, 0.234 in Diameter Pin, Wall Mounting, 50 lb Load Capacity, 3 in Overall Width, Cold Rolled Steel, Zinc Plated, BHMA A138.18, For Mortise Installations
National Hardware V2003 Hook and Eye National Hardware N141-945 Narrow Hinge National Hardware V288 Hinge Hasp
HOOK AND EYES 4IN SS
Our Price: $5.23
HINGE HASPS 4IN ZN PLT
Our Price: $5.32
National Hardware Hook and Eye, Series: V2003, 4 in Length, Stainless Steel, BHMA A138.18, For Interior and Exterior Applications National Hardware Narrow Hinge, Full Mortise, Series: V508, Knuckle Bearing, 6 Holes, 0.23 in Hole Diameter, 0.06 in Leaf Thickness, 2-1/2 in Door Leaf Length, 2-1/2 in Frame Leaf Length, Removable Pin, 0.12 in Diameter Pin, Wall Mounting, Fasteners: (5) Knuckle, Screws, 20 lb Load Capacity, 1.68 in Overall Width, Cold Rolled Steel, Zinc Plated National Hardware Hinge Hasp, Series: V288, 3/4 in Height Shackle, 6-1/4 in Length, 1-1/4 in Height, Hot Rolled Steel, Aluminum Pin, Zinc Plated, BHMA A138.18 Certified, 4 in, For Regular or Around the Corner Applications
Closetmaid 7561 U-Shape Shelf Clip Knape & Vogt BK-0103-14 Shelf Bracket HINGE WELDING STL 3-1/2X3-1/2
Attaches to the back of shelving to anchor shelf to back wall. Shelf clip "locks" shelving into place - attaching it at the top and bottom of shelf wire with or instead of wall clips. For concrete/stud and drywall installation. Material: Metal. With fold out support for heavy duty loads. Load tested to 300 lbs. For use on cabinets and lightweight doors.  5 knuckles.
National Hardware N146-373 Flush/Full Inset Square Corner Narrow Hinge National Hardware N146-290 Flush/Full Inset Square Corner Narrow Hinge National Hardware V284 Flush/Full Inset Light T Hinge
T HINGES 2IN ZN PLT
Our Price: $5.62
National Hardware Narrow Hinge, Flush/Full Inset, Square Corner, Series: V518, 6 Holes, 1/4 in Hole Diameter, 0.07 in Leaf Thickness, 3 in Door Leaf Length, 3 in Frame Leaf Length, Non-Removable Pin, 0.16 in Diameter Pin, Steel Pin, Wall Mounting, Fasteners: Screws, 28 lb Load Capacity, 3 in Overall Width, Cold Rolled Steel, Zinc Plated National Hardware Narrow Hinge, Flush/Full Inset, Square Corner, Series: V518, 6 Holes, 1/4 in Hole Diameter, 0.06 in Leaf Thickness, 2-1/2 in Door Leaf Length, 2-1/2 in Frame Leaf Length, Non-Removable Pin, 0.12 in Diameter Pin, Steel Pin, Wall Mounting, Fasteners: Screws, 20 lb Load Capacity, 2-1/2 in Overall Width, Cold Rolled Steel, Brass National Hardware Light T Hinge, Flush/Full Inset, Series: V284, 6 Holes, 0.2 in Hole Diameter, 0.048 in Leaf Thickness, 2 in Door Leaf Length, 0.54 in Frame Leaf Length, 1.81 in Frame Leaf Width, 0.119 in Diameter Pin, Aluminum Pin, Wall Mounting, Fasteners: NO 6 Flat Head Screw, 18 lb Load Capacity, 1.91 in Overall Width, Hot Rolled Steel
Closetmaid 26607 Support Bracket Knape & Vogt 0202-14PM Shelf Standard HINGE UTL STL GALV 3X3IN
Preloaded with #8 pin drive and anchors. No.6606, 71925 and No. 21775. - For Organizer, Wardrobe, SuperSlide and Close Mesh Shelves 12" in depth; and Wardrobe or hanging SuperSlide shelves 16" in depth. No. 26607, 71924, and No.21776 - For Organizer, SuperSlide (in storage application), and Close Mesh shelves 16" in depth. No.26605 - For Organizer, Wardrobe, SuperSlide and Close Mesh Shelves 20" in depth. Knape & Vogt Shelf Standard, Heavy Duty, 14 in Length, 4.88 in Width, 3.88 in Depth Five knuckle full mortise design. Allows easy installation or removal of lightweight doors. Screws included.
National Hardware N141-879 Narrow Hinge ShelfTrack 2853 Shelf Bracket HOOK/EYE STAINLESS STEEL 4IN
NARROW HINGES 2IN BRS
Our Price: $5.82
National Hardware Narrow Hinge, Full Mortise, Series: V508, Knuckle Bearing, 4 Holes, 0.23 in Hole Diameter, 0.06 in Leaf Thickness, 2 in Door Leaf Length, 2 in Frame Leaf Length, Removable Pin, 0.12 in Diameter Pin, Wall Mounting, Fasteners: (5) Knuckle, Screws, 10 lb Load Capacity, 1.56 in Overall Width, Cold Rolled Steel, Brass For use with ShelfTrack system. Locks the wire shelf to the vertical wall standard for added safety. Keeps shelves from being pushed up and unlocked accidentally. Works with ventilated shelving. 1/2" width. Can be used to latch gates or doors and to fasten screen or storm panel. Sharp points bites into wood easily.
National Hardware 286BC Extra Heavy Flush/Full Inset T Hinge HINGE UTILITY STL 3-1/2X3-1/2 Knape & Vogt 256 Adjustable Dimple Pilaster Support
T HINGES 6IN ZN PLT
Our Price: $5.90
National Hardware T Hinge, Extra Heavy, Flush/Full Inset, Series: 286BC, 0.095 in Leaf Thickness, 6 in Door Leaf Length, 2.15 in Door Leaf Width, 4-1/4 in Frame Leaf Length, 1.83 in Frame Leaf Width, 0.326 in Diameter Pin, Wall Mounting, Fasteners: NO 12 Flat Head Screw, 83 lb Load Capacity, Hot Rolled Steel, Zinc Plated, BHMA A138.18 Five knuckle full mortise design. Allows easy installation or removal of lightweight doors. Screws included. Snaps securely into place. For use with No. 233 and No. 255. High strength steel.
HINGE BRD ZINC PLATED 3-1/2IN National Hardware V284 Flush/Full Inset Light T Hinge National Hardware 286BC Extra Heavy Flush/Full Inset T Hinge
T HINGES 3IN ZN PLT
Our Price: $6.04
T HINGES 5IN ZN PLT
Our Price: $6.04
504. Swaged for mortise installations. Manufactured with cold rolled steel. Five knuckle, full mortise design. Loose pin allows doors to be removed without removing hinge. Boxed loose barcoded. National Hardware Light T Hinge, Flush/Full Inset, Series: V284, 6 Holes, 0.21 in Hole Diameter, 0.056 in Leaf Thickness, 3 in Door Leaf Length, 0.69 in Frame Leaf Length, 2.24 in Frame Leaf Width, 0.17 in Diameter Pin, Aluminum Pin, Wall Mounting, Fasteners: NO 6 Flat Head Screw, 18 lb Load Capacity, 2.34 in Overall Width, Hot Rolled Steel National Hardware T Hinge, Extra Heavy, Flush/Full Inset, Series: 286BC, 0.28 in Hole Diameter, 0.09 in Leaf Thickness, 5 in Door Leaf Length, 1.91 in Door Leaf Width, 3-3/4 in Frame Leaf Length, 1.6 in Frame Leaf Width, 0.272 in Diameter Pin, Wall Mounting, Fasteners: NO 9 Flat Head Screw, 70 lb Load Capacity, Hot Rolled Steel, Zinc Plated
National Hardware 505BC Flush/Full Inset Broad Hinge Closetmaid 7546 Down Clip/Anchor HOOK/EYE GATE ZINC PLATED 5IN
National Hardware Broad Hinge, Flush/Full Inset, Series: 505BC, 6 Holes, 0.23 in Hole Diameter, 0.11 in Leaf Thickness, 3-1/2 in Door Leaf Length, 3-1/2 in Frame Leaf Length, Riveted, Non-Removable Pin, 0.27 in Diameter Pin, Wall Mounting, 70 lb Load Capacity, 3.62 in Overall Length, 3-1/2 in Overall Width, Cold Rolled Steel, Zinc Plated Attaches to the back of shelving to anchor shelf to back wall. For concrete/stud and drywall installation. Package includes 12 clips, 12 anchors and 12 #8 screws. Heavy gauge steel allows for rugged use. Includes 1-5/8 x 1-1/4 inch extra heavy plate staple. Fasteners included for installation. Manufactured from steel wire and hot-rolled steel. Visual-pack.
National Hardware N141-960 Narrow Hinge HINGE UTL SQ CNR ZN PLT 3X2IN HOOK/EYE STAINLESS STEEL 3IN
National Hardware Narrow Hinge, Full Mortise, Series: V508, Knuckle Bearing, 6 Holes, 0.23 in Hole Diameter, 0.06 in Leaf Thickness, 2-1/2 in Door Leaf Length, 2-1/2 in Frame Leaf Length, Removable Pin, 0.12 in Diameter Pin, Wall Mounting, Fasteners: (5) Knuckle, Screws, 20 lb Load Capacity, 1.68 in Overall Width, Cold Rolled Steel, Brass Five knuckle full mortise design. Allows easy installation or removal of lightweight cabinet doors. Screws included. Can be used to latch gates or doors and to fasten screen or storm panel. Sharp points bites into wood easily.
National Hardware V284 Flush/Full Inset Light T Hinge National Hardware N142-034 Narrow Hinge National Hardware N146-399 Flush/Full Inset Square Corner Narrow Hinge
T HINGES 4IN ZN PLT
Our Price: $6.49
NARROW HINGES 3IN BRS
Our Price: $6.52
National Hardware Light T Hinge, Flush/Full Inset, Series: V284, 6 Holes, 0.23 in Hole Diameter, 0.056 in Leaf Thickness, 4 in Door Leaf Length, 3/4 in Frame Leaf Length, 2.44 in Frame Leaf Width, 0.195 in Diameter Pin, Aluminum Pin, Wall Mounting, Fasteners: NO 7 Flat Head Screw, 2.54 in Overall Width, Hot Rolled Steel, Zinc Plated, BHMA A138.18 National Hardware Narrow Hinge, Full Mortise, Series: V508, Knuckle Bearing, 6 Holes, 1/4 in Hole Diameter, 0.07 in Leaf Thickness, 3 in Door Leaf Length, 3 in Frame Leaf Length, Removable Pin, 0.16 in Diameter Pin, Wall Mounting, Fasteners: (5) Knuckle, Screws, 28 lb Load Capacity, 2.06 in Overall Width, Cold Rolled Steel, Zinc Plated National Hardware Narrow Hinge, Flush/Full Inset, Square Corner, Series: V518, 6 Holes, 1/4 in Hole Diameter, 0.07 in Leaf Thickness, 3 in Door Leaf Length, 3 in Frame Leaf Length, Non-Removable Pin, 0.16 in Diameter Pin, Steel Pin, Wall Mounting, Fasteners: Screws, 28 lb Load Capacity, 3 in Overall Width, Cold Rolled Steel, Brass
HINGE STRAP STEEL LD 6IN ZINC <