Home > HARDWARE > GENERAL HARDWARE > SHELVING & CLOSET > METAL SHELVING
Sort By:
1
National Hardware MPB107 Pole Socket Set SuperSlide 948 Pre-Loaded Wall Bracket National Hardware BPB107 Pole Socket Set
National Hardware Pole Socket Set, Series: MPB107, 0.8 in Depth, 0.13 in Thickness, Polypropylene, White, 90 lb Load Capacity, Suitable For Use With: Upto 1-3/8 in Diameter Pole, Includes: (1) Socket Pair Per Pack and Fasteners, For used to mount wood closet poles Secures shelf to side wall of closet. Pre-loaded with pins and anchors, no screws needed. Accommodates pole clips and shelf stops in "TotalSlide" system. National Hardware Pole Socket Set, Series: BPB107, 0.8 in Depth, 0.13 in Thickness, Polypropylene, White, 90 lb Load Capacity, Suitable For Use With: Upto 1-3/8 in Diameter Pole, Includes: (1) Socket Pair Per Pack and Fasteners, 0.19 in Hole Diameter, For used to mount wood closet poles
Prime Line R 7133 Drawer Track Backplate Closetmaid 01016 End Cap SuperSlide 5629 Closet Rod Support
Can be inverted for self-adjusting application, used on rolled edge and other center mounted tracks. Vinyl end cap provides protection from cut end of wire shelving that exposes possible rough edges. Large end caps cover the large rod, 0 gauge, .25"H x .4"W x .4"D. Small end caps are for the 4 gauge wire, .2"H x .2"W x .2"D. Designed to be used with ClosetMaid - Shelf & Rod shelving. SuperSlide shelving and hardware allows hangers to slide freely on both Fixed Mount and ShelfTrack mounting systems. Hangers slide without interruption. Snaps onto SuperSlide shelf to support hang rod. Use one every 36 in. of hang rod and at each end of shelf and hang rod. 5.75"H x 0.87"W x 3.87"D. Material: Resin
SOCKET METAL POLE SAT BRS BG  Prime Line R 7085 Drawer Track Guide Kit Prime Line R 7152 Drawer Track Guide Kit
Fits up to 1-3/8" in diameter. Includes one pair of pole sockets and screws. Polyethylene guide and white polyethylene side saddles, restores smooth operation to track mounted drawers. Fits a 9/32" x 1-1/8" track. Polyethylene guide and white polyethylene side saddles, restores smooth operation to track mounted drawers. Fits a 9/32" x 1-1/8" track.
Prime Line R 7154 Drawer Track Guide Kit SOCKET PLASTIC POLE WHITE BG  Prime Line R 7145 Drawer Track Backplate
Yellow polyethylene guide and white polyethylene side saddles, restores smooth operation to track mounted drawers. Fits a 3/32" x 1-9/32" track. Contents: 2 guides, 4 side saddles, and 2 sets of installation fasteners. Fits up to 1-3/8" in diameter. Reinforced design allows for interior and exterior uses.  Single screw mounting. Includes one pair of pole sockets and screws. Used to hold track to back of cabinet; fits most popular side mount rails. Contents: 2 backplates; 2 sets of installation screws.
Prime Line R 7084 Drawer Track Guide Kit Prime Line R 7082 Drawer Track Guide Kit Prime Line N 6568 Pole Socket
Brown polyethylene guide and white polyethylene side saddles, restores smooth operation to track mounted drawers. Fits a 1/4" x 7/8" track. Contents: 2 guides, 4 side saddles, and 2 sets of installation fasteners. Red polyethylene guide and white polyethylene side saddles, restores smooth operation to track mounted drawers. Fits a 9/32" x 3/4" track. Contents: 2 guides, 4 side saddles, and 2 sets of installation fasteners. Accepts a 1-3/8" diameter standard wood pole. 2-3/16"OD x 3/4" overall. Includes one pair of pole sockets and two No.8 x 3/4" Phillips flat head screws.
Prime Line R 7130 Drawer Track Guide Kit Prime Line R 7131 Drawer Track Back Socket Knape & Vogt CD-0019 Closet Pole End Cap
Purple polyethylene guide and white side saddles. Guides used for aligning drawer and making for a smoother operation. Fits a 3/32" x 1-3/16" track. Contents: 2 guides, 4 side saddles, and 2 sets of installation fasteners. Designed for use with metal rolled-edge tracks. Mounts horizontally or vertically. Used on Amerock Tri-roller drawer slide track. (Track fits snug). Covers up pole ends, keeps hangers from sliding off, friction fit. For use with 1-1/4" diameter pole (except 0023 uses 1" diameter pole).
National Hardware BPB105 Pole Socket Set SOCKET PLASTIC POLE WHITE CD  National Hardware V107 Pole Socket Set
POLE SOCKETS BRS
Our Price: $2.44
National Hardware Pole Socket Set, Series: BPB105, 0.38 in Depth, 0.02 in Thickness, Steel, Brass, 400 lb Load Capacity, Suitable For Use With: Upto a 1-3/8 in Diameter Pole, Includes: (1) Socket Pair Per Pack and Fasteners, For Mount Wood Closet Poles Fits up to 1-3/8" in diameter. Reinforced design allows for interior and exterior uses.  Single screw mounting. Includes one pair of pole sockets and screws. National Hardware Pole Socket Set, Series: V107, 0.8 in Depth, 0.13 in Thickness, Polypropylene, White, 90 lb Load Capacity, Suitable For Use With: Upto 1-3/8 in Diameter Pole, Includes: (1) Socket Pair Per Pack and Fasteners, 0.19 in Hole Diameter, For used to mount wood closet poles
SOCKET WOOD POLE NAT WD 1-3/8 Closetmaid 1164XBJ Support Bracket SOCKET METAL POLE SAT BRS CD
1-3/8" diameter. Single screw mounting. Includes two pcs of .75" screws and pole sockets. Closetmaid Support Bracket, 12 in Length, 2 in Width, 2 in Depth, Steel, Epoxy Coated, White, Suitable For Use With: Wire Shelving, Includes: (2) Brackets, (2) Anchors, (2) NO 8 Pins Fits up to 1-3/8" in diameter. Includes one pair of pole sockets and screws.
Knape & Vogt 1284-4WP Rear Mouth Socket Rear Mounting Bracket SuperSlide 6609 Pre-Loaded Wall Bracket SOCKET WOOD POLE NAT WD 1-3/8
Optional bracket for use with draw slide No.1284. Heavy duty preloaded wall bracket with anchor, mounts to the side wall and holds the end of the SuperSlide shelf and Hang Rod. Supports front lip of shelving and hang rod where they meet the side wall. With pre-loaded pins. For drywall installations. 4.125"H x 1.75"W x 2"D. Material: Resin. 1-3/8" diameter. Single screw mounting. Includes two pcs of .75" screws and pole sockets.
Closetmaid 6610 Wall Clip National Hardware V105 Pole Socket Set BRACKET SUPPORT SHOE SHELF WHT
POLE SOCKETS BRS
Our Price: $3.09
Anchors shelf to wall. Ensures stability of shelf. National Hardware Pole Socket Set, Series: V105, 0.38 in Depth, 0.02 in Thickness, Steel, Brass, 400 lb Load Capacity, Suitable For Use With: Upto 1-3/8 in Diameter Pole, Includes: (1) Socket Pair Per Pack and Fasteners, 0.16 in Hole Diameter, For used to mount wood closet poles For wire shelving, converts almost any wire shelf to a shoe shelf. Make a shoe shelf by inverting shelf, lip facing up. Holds shoes away from wall at an angle. Use 1 shoe support bracket every 24 in. Does not work with Close Mesh shelving. 6.125"H x 1.25"W x 4.75"D.
BRACKET CLOSET POLE SAT BRASS Prime Line R 7147 Flat Stepped Drawer Guide Roller Assembly Closetmaid 1002 Joiner Plate
Screws included. Rollers mount at the front of the drawer opening, and help center the drawer. This allows for smoother operation. Flat stepped roller edge type, mixed materials. Includes 1 left hand roller, 1 right hand roller, and 1 set of installation fasteners. Use to join 2 shelves together to create a continuous run of shelving. Supports the joining of 2 wire shelves. One set consists of 2 joiner plates, 1 bolt and 1 nut. NOT for use with Close Mesh shelving. 1.19?H x 2.25?W x 1.13?D. Material: Resin.
SuperSlide 5655 Closet Rod Support Amerock Allison 573ABS Bail Pull Prime Line N 6794 Rod Holder Closet Pole Socket
Converts shelf & rod shelving to a continous slide. Hang rod snaps into bracket to create an continuous slide for hangers. Snaps onto SuperSlide shelf to support hang rod. Use one every 36 in. (91,44cm) of hang rod and at each end of shelf and hang rod. 5.75"H x 0.87"W x 3.87"D. Material: Resin. Pull with 3" centers, 3-13/16"L  x  2-3/4"W. Fits up to 1-3/8" in diameter. Includes one pair of pole sockets with fasteners.
Prime Line R 7148 Convex Drawer Track Roller SOCKET POLE WHITE             Schlage C9340F3 Chest Handle
SOCKET POLE WHITE
Our Price: $3.56
Steel bracket, convex plastic roller mounts on rear of drawer. Used as center roller for monorail drawer slide systems. Contains: 2 roller assemblies, 2 sets of installation screws. Used to mount wood closet poles. For up to a 1-3/8" diameter pole. Includes 1 socket pair per pack. Includes. 1-3/8" x 3-1/2". With screws.
BRACKET RR MT F/MDL 84-8450 ZN Prime Line R 7141 Drawer Track Roller SuperSlide 75651 Closet Rod Connector
Optional rear mounting socket for face frame application simplifies installation. Non handed. Hardware included.  3-1/2" L x 0.50"W. Zinc finish. Steel bracket, convex plastic roller mounts on rear of drawer. Used as center roller for monorail drawer slide systems. Contains: 2 roller assemblies, 2 sets of installation screws. Use with SuperSlide shelving to create uninterrupted sliding action around corners for walk-in closets. Keeps hangers from sliding off exposed ends. Support the connection of the two pieces of hang rod with a hang bar support. 2"H x 0.5"W x 0.5"D. Material: Plastic.
Closetmaid 6620 Wall Bracket Prime Line R 7132 Drawer Track Back Roller with Plastic Roller Closetmaid 1180 Support Bracket
Heavy duty preloaded bracket with anchor easily mounts to the wall and holds the end of any size ClosetMaid shelf. Provides side wall support. Supports front lip of shelving where it meets the side wall. For drywall installations. Includes: 2.875"H x 2.125"W x 1.75"D. Material: Resin. Steel bracket, convex plastic roller mounts on rear of drawer. Used as center roller for monorail drawer slide systems. Contents: 2 roller assemblies, 2 sets of installation screws. Closetmaid Support Bracket, 12 in Length, 2 in Width, 2 in Depth, Steel, Epoxy Coated, White, Suitable For Use With: Wire Shelving, Includes: (1) Support Bracket, (1) Anchor, (1) NO 8 Pin
SuperSlide 6641 Wall Bracket BRACKET RR MT F/MDL TT100 ZINC National Hardware DPB103 Pole Socket Set
Supports low profile SuperSlide shelving in a wall to wall installation. Includes: 2 wall brackets, 4 pins and 4 anchors. Use in conjunction with support brackets and wall clips for installing wire shelving. Suports front lip of shelving where it meets the side wall. 2"H x 2.19W x 1.75"D. Material: Resin Optional rear mounting socket for face frame application simplifies installation. Non handed. Hardware included.  3-1/2" L x 0.50"W. Zinc finish. National Hardware Pole Socket Set, Series: DPB103, Wood, Natural, 120 lb Load Capacity, Suitable For Use With: Upto 1-3/8 in Diameter Pole, Includes: Fasteners, For used to mount wood closet poles
Closetmaid 1001 Corner Support Bracket BRACKET REAR MNT F/MDL 1805 ZN Amerock Allison BP888AE Lion Head Furniture Trim Ring Pull
Supports front lip of shelving to keep it level where it meets another shelf in a corner. Snap in place design. For corner installations.  0.375?H x 5?W x 0.75?D. Material: steel, coated with epoxy. Pair of rear brackets (left and right) for the 1805 epoxy-coated drawer slide features a 2-3/8" socket. Pull with ornate lion design, 1-3/8" diameter.
National Hardware V103 Pole Socket Set Prime Line R 7240 Right Hand/Left Hand Drawer Track Back Plate SuperSlide 75638 Closet Rod End Cap
National Hardware Pole Socket Set, Series: V103, Wood, Natural, 120 lb Load Capacity, Suitable For Use With: Upto 1-3/8 in Diameter Pole, Includes: Fasteners, For used to mount wood closet poles White nylon; 2-3/4"socket depth allows 2"of front to back adjustment of the rail; used on side mounted drawer track systems. Raw finish. Contents: 1 left hand bracket; 1 right hand bracket; 2 sets of installation screws. NOTE: Right side has a larger lip. For use with ClosetMaid, SuperSlide wire shelving. Prevents hangers from sliding off end of closet hang rod. Insert into end of the hang rod.Two end caps per package. 0.5"H x 0.5"W x 0.5"D. Material: Resin.
Prime-Line R 7321 Drawer Track Guide and Glide National Hardware V1864 Chest Handle Prime Line R 7125 Undermount Drawer Track Kit
Used on furniture drawer systems; for dressers, hutches and night stand drawers. Opening for metal track on larger piece measures 15/16" x 3/32". Kit includes 2 dark-brown, plastic track case guides and 2 track guides, 4 white, plastic corner glides, 8 ring shank nails for nailing in corner glides (3/4" x 14-1/2 ga.), and 8 Phillips drive, pan head screws for installation of guides (#6 x 5/8"). National Hardware Chest Handle, Series: V1864, 3-1/2 in, Steel, Brass, 3.42 in Length X 2.34 in Width, Includes: (4) Screws Rolled edge galvanized steel track with polyethylene guides and nylon front rollers. Track may be cut down for shorter drawer and can be used for top or bottom mount installations. Contents: 1 track; 1 front plate; 1 back plate; 1 drawer guide; 2 front rollers; 1 set of installation fasteners.
Knape & Vogt 1805HWH400 Euro Self-Close Drawer Slide Closetmaid 7561 U-Shape Shelf Clip National Hardware N203-760 Chest Handle
Specially designed for use in kitchen cabinet, commercial millwork, home office and RTA furniture applications. Adaptable to face frame or 32mm mounting. Single captive roller limits side play for improved lateral stability. Positive double out-stop. Positive in-stop. Lift-out disconnect. Four way adjustment slots. Positive lock-open position. Cabinet member side mounts. Additional rear mounting socket available for face frame applications. Drawer member fastens to either side or bottom of drawer. Height 1.4". Required Clearance; Side: 1/2" plus 1/32" minus 0 each side. Top:1" required for drawer lift out. Bottom: None drawer can rest on cabinet. Packed with screws and installation instructions. Maximum drawer width 18". Attaches to the back of shelving to anchor shelf to back wall. Shelf clip "locks" shelving into place - attaching it at the top and bottom of shelf wire with or instead of wall clips. For concrete/stud and drywall installation. Material: Metal. National Hardware Chest Handle, Series: V175, Suitable For Use With: Small Chests and Boxes, 3-1/2 in, 200 lb Safe Working Load, Steel, Zinc Plated, 3.35 in Length X 2.74 in Height, BHMA A138.18
Closetmaid 26607 Support Bracket Knape & Vogt 1805HWH450 Euro Self-Close Drawer Slide Knape & Vogt 1175P ZC 20 Light Duty Single Track Drawer Slide
Preloaded with #8 pin drive and anchors. No.6606, 71925 and No. 21775. - For Organizer, Wardrobe, SuperSlide and Close Mesh Shelves 12" in depth; and Wardrobe or hanging SuperSlide shelves 16" in depth. No. 26607, 71924, and No.21776 - For Organizer, SuperSlide (in storage application), and Close Mesh shelves 16" in depth. No.26605 - For Organizer, Wardrobe, SuperSlide and Close Mesh Shelves 20" in depth. Specially designed for use in kitchen cabinet, commercial millwork, home office and RTA furniture applications. Adaptable to face frame or 32mm mounting. Single captive roller limits side play for improved lateral stability. Positive double out-stop. Positive in-stop. Lift-out disconnect. Four way adjustment slots. Positive lock-open position. Cabinet member side mounts. Additional rear mounting socket available for face frame applications. Drawer member fastens to either side or bottom of drawer. Height 1.4". Required Clearance; Side: 1/2" plus 1/32" minus 0 each side. Top:1" required for drawer lift out. Bottom: None drawer can rest on cabinet. Packed with screws and installation instructions. Maximum drawer width 18". Light-Duty slide designed for general drawer applications. Mounts with staples or screws. Height: 1". Required Clearance:1/8" each side; 1-1/2" from rear of drawer to cabinet; drawer to be 3/8" shallower than opening. High density polyethylene rollers. Drawers lift out for easy removal. Packaged with screws and installation instructions.
SLIDE DRWR 75LB 300MM WHT 12IN Knape & Vogt 1175P ZC 22-5/8 Light Duty Single Track Drawer Slide ROD CLOSET ADJ 30-48IN SILVER
Specially designed for use in kitchen cabinet, commercial millwork, home office and RTA furniture applications. Adaptable to face frame or 32mm mounting. Single captive roller limits side play for improved lateral stability. Positive double out-stop. Positive in-stop. Lift-out disconnect. Four way adjustment slots. Positive lock-open position. Cabinet member side mounts. Additional rear mounting socket available for face frame applications. Drawer member fastens to either side or bottom of drawer. Height 1.4". Required Clearance; Side: 1/2" plus 1/32" minus 0 each side. Top:1" required for drawer lift out. Bottom: None drawer can rest on cabinet. Packed with screws and installation instructions. Maximum drawer width 18". Light-Duty slide designed for general drawer applications. Mounts with staples or screws. Height: 1". Required Clearance:1/8" each side; 1-1/2" from rear of drawer to cabinet; drawer to be 3/8" shallower than opening. High density polyethylene rollers. Drawers lift out for easy removal. Packaged with screws and installation instructions. Rods sized 48" to 72" and 72" to 120" includes 1-piece central support, and rods sized 96" to 150" include 2-piece central support.
Knape & Vogt 1805HWH500 Euro Self-Close Drawer Slide Knape & Vogt RP0022-18/30 Adjustable Closet Rod Knape & Vogt 1175P ZC 24 Light Duty Single Track Drawer Slide
Specially designed for use in kitchen cabinet, commercial millwork, home office and RTA furniture applications. Adaptable to face frame or 32mm mounting. Single captive roller limits side play for improved lateral stability. Positive double out-stop. Positive in-stop. Lift-out disconnect. Four way adjustment slots. Positive lock-open position. Cabinet member side mounts. Additional rear mounting socket available for face frame applications. Drawer member fastens to either side or bottom of drawer. Height 1.4". Required Clearance; Side: 1/2" plus 1/32" minus 0 each side. Top:1" required for drawer lift out. Bottom: None drawer can rest on cabinet. Packed with screws and installation instructions. Maximum drawer width 18". 1-1/4" diameter. Light-Duty slide designed for general drawer applications. Mounts with staples or screws. Height: 1". Required Clearance:1/8" each side; 1-1/2" from rear of drawer to cabinet; drawer to be 3/8" shallower than opening. High density polyethylene rollers. Drawers lift out for easy removal. Packaged with screws and installation instructions.
ROD CLOSET ADJ 18-30IN SILVER Knape & Vogt 1805HWH550 Euro Self-Close Drawer Slide HANDLE CHEST ZN PLT 3-1/2IN
Rods sized 48" to 72" and 72" to 120" includes 1-piece central support, and rods sized 96" to 150" include 2-piece central support. Specially designed for use in kitchen cabinet, commercial millwork, home office and RTA furniture applications. Adaptable to face frame or 32mm mounting. Single captive roller limits side play for improved lateral stability. Positive double out-stop. Positive in-stop. Lift-out disconnect. Four way adjustment slots. Positive lock-open position. Cabinet member side mounts. Additional rear mounting socket available for face frame applications. Drawer member fastens to either side or bottom of drawer. Height 1.4". Required Clearance; Side: 1/2" plus 1/32" minus 0 each side. Top:1" required for drawer lift out. Bottom: None drawer can rest on cabinet. Packed with screws and installation instructions. Maximum drawer width 18". Designed for small chests and boxes. Handle allows for in use hand clearance. Easy grip handle. Safe working load 200 lbs.
Closetmaid 7546 Down Clip/Anchor National Hardware N117-002 Chest Handle ROD CLOSET BRT 18-30IN
Attaches to the back of shelving to anchor shelf to back wall. For concrete/stud and drywall installation. Package includes 12 clips, 12 anchors and 12 #8 screws. National Hardware Chest Handle, Series: V175, Suitable For Use With: Small Chests and Boxes, 3-1/2 in, 200 lb Safe Working Load, Steel, Zinc Plated, 4.23 in Length X 0.46 in Width X 3.53 in Height, BHMA A138.18 Used to hang clothes and other items. Tubes are made with lock seam construction for strength.  Ends align for easy installation. Visual-pack.
Knape & Vogt 0018-4WT3 1-Piece 3 Pole Closet Rod Closetmaid 7540 Small End Cap Stanley V8600 Closet Flange Set
FLANGE SET WHITE
Our Price: $6.96
1-1/4" Diameter. Vinyl end cap provides protection from cut end of wire shelving that exposes possible rough edges. Large end caps cover the large rod, 0 gauge, .25"H x .4"W x .4"D. Small end caps are for the 4 gauge wire, .2"H x .2"W x .2"D. Designed to be used with ClosetMaid - Shelf & Rod shelving. Used to support closet rods. Includes one open and one closed socket. Open socket allows you to install the sockets before inserting a closet rod. Fits 1-1/4 in. to 1-5/16 in. diameter pole. Includes mounting screws for easy installation.
Closetmaid 26605 Support Bracket ROD CLOSET ADJ 18-30IN WHITE  Stanley V8600 Closet Flange Set
FLANGE SET ORB FINISH
Our Price: $7.53
Preloaded with #8 pin drive and anchors. No.6606, 71925 and No. 21775. - For Organizer, Wardrobe, SuperSlide and Close Mesh Shelves 12" in depth; and Wardrobe or hanging SuperSlide shelves 16" in depth. No. 26607, 71924, and No.21776 - For Organizer, SuperSlide (in storage application), and Close Mesh shelves 16" in depth. No.26605 - For Organizer, Wardrobe, SuperSlide and Close Mesh Shelves 20" in depth. Rods sized 48" to 72" and 72" to 120" includes 1-piece central support, and rods sized 96" to 150" include 2-piece central support. Used to support closet rods. Includes one open and one closed socket. Open socket allows you to install the sockets before inserting a closet rod. Fits 1-1/4 in. to 1-5/16 in. diameter pole. Includes mounting screws for easy installation.
Knape & Vogt RP0021-18/30 Adjustable Closet Rod Knape & Vogt 1284PWH400 Euro Roller Slide Closetmaid 6606 Support Bracket
1-1/4" diameter. White finish. Medium-duty slide designed for kitchen cabinet and bathroom vanity applications. Adaptable to frame mounting and 32mm mounting system. Solid stud and captive roller reduces side play. Positive stop, lift-out disconnect, stay-closed design. Adjustment slots on both the drawer member and the cabinet member ease installation. Screws fasten to either side or bottom of drawer. Positive lock-out feature is ideal for pull out work surfaces. Height: 1-9/32". Required Clearance: 1/2" plus 1/32" minus 0 each side. 1" between overall drawer side height and cabinet opening height required for drawer insertion and removal. Packaged with screws and installation instructions. Maximum drawer width 18". Preloaded with #8 pin drive and anchors. No.6606, 71925 and No. 21775. - For Organizer, Wardrobe, SuperSlide and Close Mesh Shelves 12" in depth; and Wardrobe or hanging SuperSlide shelves 16" in depth. No. 26607, 71924, and No.21776 - For Organizer, SuperSlide (in storage application), and Close Mesh shelves 16" in depth. No.26605 - For Organizer, Wardrobe, SuperSlide and Close Mesh Shelves 20" in depth.
Knape & Vogt 1284PWH450 Drawer Slide Stanley V8600 Closet Flange Set Stanley V8600 Closet Flange Set
Medium-duty slide designed for kitchen cabinet and bathroom vanity applications. Adaptable to frame mounting and 32mm mounting system. Solid stud and captive roller reduces side play. Positive stop, lift-out disconnect, stay-closed design. Adjustment slots on both the drawer member and the cabinet member ease installation. Screws fasten to either side or bottom of drawer. Positive lock-out feature is ideal for pull out work surfaces. Height: 1-9/32". Required Clearance: 1/2" plus 1/32" minus 0 each side. 1" between overall drawer side height and cabinet opening height required for drawer insertion and removal. Packaged with screws and installation instructions. Maximum drawer width 18". Used to support closet rods. Includes one open and one closed socket. Open socket allows you to install the sockets before inserting a closet rod. Fits 1-1/4 in. to 1-5/16 in. diameter pole. Includes mounting screws for easy installation. Used to support closet rods. Includes one open and one closed socket. Open socket allows you to install the sockets before inserting a closet rod. Fits 1-1/4 in. to 1-5/16 in. diameter pole. Includes mounting screws for easy installation.
Knape & Vogt 1260P-16 Light Duty Drawer Slide Knape & Vogt 1284PALM500 Euro Roller Slide Knape & Vogt RP0022-30/48 Adjustable Closet Rod
Light-Duty slide designed for general cabinet, desk and fixture application. Height: 3-1/8". Required Clearance: 1/2" plus 1/32" minus 0 each side. Features Positive stop. Stay-closed design. Depress stop lever for drawer removal. Dust shielded ball bearing rollers. Packaged with screws and installation instructions. Maximum drawer width 18". Medium-duty slide designed for kitchen cabinet and bathroom vanity applications. Adaptable to frame mounting and 32mm mounting system. Solid stud and captive roller reduces side play. Positive stop, lift-out disconnect, stay-closed design. Adjustment slots on both the drawer member and the cabinet member ease installation. Screws fasten to either side or bottom of drawer. Positive lock-out feature is ideal for pull out work surfaces. Height: 1-9/32". Required Clearance: 1/2" plus 1/32" minus 0 each side. 1" between overall drawer side height and cabinet opening height required for drawer insertion and removal. Packaged with screws and installation instructions. Maximum drawer width 18". 1-1/4" diameter.
Knape & Vogt 1284PWH500 Drawer Slide Knape & Vogt 1260P-18 Light Duty Drawer Slide Knape & Vogt 1300P ZC 12 Drawer Slide
Medium-duty slide designed for kitchen cabinet and bathroom vanity applications. Adaptable to frame mounting and 32mm mounting system. Solid stud and captive roller reduces side play. Positive stop, lift-out disconnect, stay-closed design. Adjustment slots on both the drawer member and the cabinet member ease installation. Screws fasten to either side or bottom of drawer. Positive lock-out feature is ideal for pull out work surfaces. Height: 1-9/32". Required Clearance: 1/2" plus 1/32" minus 0 each side. 1" between overall drawer side height and cabinet opening height required for drawer insertion and removal. Packaged with screws and installation instructions. Maximum drawer width 18". Light-Duty slide designed for general cabinet, desk and fixture application. Height: 3-1/8". Required Clearance: 1/2" plus 1/32" minus 0 each side. Features Positive stop. Stay-closed design. Depress stop lever for drawer removal. Dust shielded ball bearing rollers. Packaged with screws and installation instructions. Maximum drawer width 18". Designed for medium duty applications where a lever release is desired. For kitchen cabinet, vanity, desk and store fixture applications. Height: 3".  Required Clearance: 1/2" plus 1/32" minus 0 each side. Features Positive stop lever that prevents accidental drawer removal.  Zinc-plated cold rolled steel. Ball bearing nylon rollers. Packaged with screws and installation instructions. Maximum drawer width 18".
Knape & Vogt 1284PALM550 Euro Roller Slide Knape & Vogt 1284PWH550 Drawer Slide Knape & Vogt 1300P ZC 14 Drawer Slide
Medium-duty slide designed for kitchen cabinet and bathroom vanity applications. Adaptable to frame mounting and 32mm mounting system. Solid stud and captive roller reduces side play. Positive stop, lift-out disconnect, stay-closed design. Adjustment slots on both the drawer member and the cabinet member ease installation. Screws fasten to either side or bottom of drawer. Positive lock-out feature is ideal for pull out work surfaces. Height: 1-9/32". Required Clearance: 1/2" plus 1/32" minus 0 each side. 1" between overall drawer side height and cabinet opening height required for drawer insertion and removal. Packaged with screws and installation instructions. Maximum drawer width 18". Medium-duty slide designed for kitchen cabinet and bathroom vanity applications. Adaptable to frame mounting and 32mm mounting system. Solid stud and captive roller reduces side play. Positive stop, lift-out disconnect, stay-closed design. Adjustment slots on both the drawer member and the cabinet member ease installation. Screws fasten to either side or bottom of drawer. Positive lock-out feature is ideal for pull out work surfaces. Height: 1-9/32". Required Clearance: 1/2" plus 1/32" minus 0 each side. 1" between overall drawer side height and cabinet opening height required for drawer insertion and removal. Packaged with screws and installation instructions. Maximum drawer width 18". Designed for medium duty applications where a lever release is desired. For kitchen cabinet, vanity, desk and store fixture applications. Height: 3".  Required Clearance: 1/2" plus 1/32" minus 0 each side. Features Positive stop lever that prevents accidental drawer removal.  Zinc-plated cold rolled steel. Ball bearing nylon rollers. Packaged with screws and installation instructions. Maximum drawer width 18".
Prime Line N7050 Closet Pole Bracket National Hardware V175 Chest Handle ROD CLOSET BRT 30-48IN
Painted diecast. Includes one pair of pole sockets and screws. National Hardware Chest Handle, Series: V175, Suitable For Use With: Small Chests and Boxes, 4 in, 180 lb Safe Working Load, Steel, Zinc Plated, 4.88 in Length X 0.58 in Width X 4.13 in Height, BHMA A138.18 Used to hang clothes and other items. Tubes are made with lock seam construction for strength.  Ends align for easy installation. Visual-pack.
Knape & Vogt 1260P-20 Light Duty Drawer Slide Amerock TMPMULTI Cabinet Door and Drawer Template SuperSlide 25633 Corner Corner Round Bar
Light-Duty slide designed for general cabinet, desk and fixture application. Height: 3-1/8". Required Clearance: 1/2" plus 1/32" minus 0 each side. Features Positive stop. Stay-closed design. Depress stop lever for drawer removal. Dust shielded ball bearing rollers. Packaged with screws and installation instructions. Maximum drawer width 18". Alignment guide for mounting cabinet knobs and pulls on cabinet drawers and doors. For standard pull mounting of 3" (76mm), 3-3/4" (96mm), and 5" (128mm) hole spacing. Includes: (1) template for drawers, (1) template for doors, (1) drill bit and Easy to read instructions. Use with SuperSlide shelving to create uninterrupted sliding action around corners for walk-in closets. Tapered ends slide easily into ClosetMaid, SuperSlide hang rods. Support connection of hang rod with a Hang Bar Support. 0.75?H x 10.25?W x 10.25?DMaterial: Epoxy coated steel.
Knape & Vogt 1300P ZC 18 Drawer Slide Knape & Vogt 1300P ZC 16 Drawer Slide Knape & Vogt 1260P-22 Light Duty Drawer Slide
Designed for medium duty applications where a lever release is desired. For kitchen cabinet, vanity, desk and store fixture applications. Height: 3".  Required Clearance: 1/2" plus 1/32" minus 0 each side. Features Positive stop lever that prevents accidental drawer removal.  Zinc-plated cold rolled steel. Ball bearing nylon rollers. Packaged with screws and installation instructions. Maximum drawer width 18". Designed for medium duty applications where a lever release is desired. For kitchen cabinet, vanity, desk and store fixture applications. Height: 3".  Required Clearance: 1/2" plus 1/32" minus 0 each side. Features Positive stop lever that prevents accidental drawer removal.  Zinc-plated cold rolled steel. Ball bearing nylon rollers. Packaged with screws and installation instructions. Maximum drawer width 18". Light-Duty slide designed for general cabinet, desk and fixture application. Height: 3-1/8". Required Clearance: 1/2" plus 1/32" minus 0 each side. Features Positive stop. Stay-closed design. Depress stop lever for drawer removal. Dust shielded ball bearing rollers. Packaged with screws and installation instructions. Maximum drawer width 18".
CAP END WHITE                 Knape & Vogt PBP10016 Precision Drawer Slide Knape & Vogt RP0021-30/48 Adjustable Closet Rod
END CAP WHITE
Our Price: $9.16
Used to cover the ends of closet rods while adding a decorative touch. Prevents hangers from sliding off the wall. Fits 1-1/4 in. to 1-5/16 in. diameter pole. Includes set screws to secure the end cap to the closet rod. Direct access mounting holes, precision ball bearings, telescopic action, non-handed design, and lever disconnect. Includes screws for installation. Height: 1-1/8". Clearance required: 1/2" plus 1/32" minus 0 each side. Maximum drawer width 24". 1-1/4" diameter. White finish.
Knape & Vogt 1300P ZC 20 Drawer Slide Knape & Vogt 1300P ZC 22 Drawer Slide CAP END CHRM FIN
END CAP CHROME FINISH
Our Price: $9.86
Designed for medium duty applications where a lever release is desired. For kitchen cabinet, vanity, desk and store fixture applications. Height: 3".  Required Clearance: 1/2" plus 1/32" minus 0 each side. Features Positive stop lever that prevents accidental drawer removal.  Zinc-plated cold rolled steel. Ball bearing nylon rollers. Packaged with screws and installation instructions. Maximum drawer width 18". Designed for medium duty applications where a lever release is desired. For kitchen cabinet, vanity, desk and store fixture applications. Height: 3".  Required Clearance: 1/2" plus 1/32" minus 0 each side. Features Positive stop lever that prevents accidental drawer removal.  Zinc-plated cold rolled steel. Ball bearing nylon rollers. Packaged with screws and installation instructions. Maximum drawer width 18". Used to cover the ends of closet rods while adding a decorative touch. Prevents hangers from sliding off the wall. Fits 1-1/4 in. to 1-5/16 in. diameter pole. Includes set screws to secure the end cap to the closet rod.
CAP END ORB FIN               Knape & Vogt RP0022-48/72 Adjustable Closet Rod Knape & Vogt PBP10018 Precision Drawer Slide
END CAP ORB FINISH
Our Price: $9.86
Used to cover the ends of closet rods while adding a decorative touch. Prevents hangers from sliding off the wall. Fits 1-1/4 in. to 1-5/16 in. diameter pole. Includes set screws to secure the end cap to the closet rod. 1-1/4" diameter. Direct access mounting holes, precision ball bearings, telescopic action, non-handed design, and lever disconnect. Includes screws for installation. Height: 1-1/8". Clearance required: 1/2" plus 1/32" minus 0 each side. Maximum drawer width 24".
CAP END STN NKL FN            Knape & Vogt 1300P ZC 24 Drawer Slide Knape & Vogt 0018-6WT3 1-Piece 3 Pole Closet Rod
END CAP STN NCKL FINISH
Our Price: $10.54
Used to cover the ends of closet rods while adding a decorative touch. Prevents hangers from sliding off the wall. Fits 1-1/4 in. to 1-5/16 in. diameter pole. Includes set screws to secure the end cap to the closet rod. Designed for medium duty applications where a lever release is desired. For kitchen cabinet, vanity, desk and store fixture applications. Height: 3".  Required Clearance: 1/2" plus 1/32" minus 0 each side. Features Positive stop lever that prevents accidental drawer removal.  Zinc-plated cold rolled steel. Ball bearing nylon rollers. Packaged with screws and installation instructions. Maximum drawer width 18". 1-1/4" Diameter.
SuperSlide 2058 Closet Rod Knape & Vogt PBP10020 Precision Drawer Slide ROD CLOSET WHITE 30-48IN
ROD CLOSET WHITE 30-48IN
Our Price: $11.18
Snaps into the Closet Rod Support to allow hangers to slide without interruption. Can be cut to customize length . Holds up to 30lbs per foot. Material: Epoxy coated steel. Direct access mounting holes, precision ball bearings, telescopic action, non-handed design, and lever disconnect. Includes screws for installation. Height: 1-1/8". Clearance required: 1/2" plus 1/32" minus 0 each side. Maximum drawer width 24". PermaSeam design consists of two structurally strong rolled shapes which telescope for easy adjustment. Closet rods exceed ANSI/BHMA A156.16 Deflection Standards when installed with center supports.
ROD CLOSET ADJ 48-72IN SILVER ROD CLOSET ADJ 30-48IN WHITE  ROD CLOSET BRT 48-72IN
ROD CLOSET BRT 48-72IN
Our Price: $12.01
Rods sized 48" to 72" and 72" to 120" includes 1-piece central support, and rods sized 96" to 150" include 2-piece central support. Rods sized 48" to 72" and 72" to 120" includes 1-piece central support, and rods sized 96" to 150" include 2-piece central support. Used to hang clothes and other items.Tubes are made with lock seam construction for strength.
Knape & Vogt PBP10022 Precision Drawer Slide National Hardware 309BC Closet Rod Knape & Vogt RP0021-48/72 Adjustable Closet Rod
CLOSET RODS 4FT WHT
Our Price: $12.44
Direct access mounting holes, precision ball bearings, telescopic action, non-handed design, and lever disconnect. Includes screws for installation. Height: 1-1/8". Clearance required: 1/2" plus 1/32" minus 0 each side. Maximum drawer width 24". National Hardware Closet Rod, Series: 309BC, 1-1/4 in Diameter x 4 ft Length, Steel, White, For used to hang clothes and other items 1-1/4" diameter. White finish.
Closetmaid 7556 U Clip SLOT MAIL SS 1-1/2IN          Knape & Vogt 0018-8WT3 1-Piece 3 Pole Closet Rod
MAIL SLOTS 1-1/2IN SS
Our Price: $13.00
Attaches to the back of shelving to anchor shelf to back wall. Shelf clip "locks" shelving into place - attaching it at the top and bottom of shelf wire with or instead of wall clips. For concrete/stud and drywall installation. Material: Metal. National Hardware Mail Slot Sleeves, Suitable For Use With: 1911 Mail Slot On Hollow-Core Doors, 1-1/2 in, Stainless Steel, Corrosion Resistance 1-1/4" Diameter.
National Hardware V1911S Mail Slot Sleeve ROD CLOSET WHITE 48-72IN      Easy Track RE1048 Closet Track Rail
MAIL SLOTS 2IN SS
Our Price: $13.76
ROD CLOSET WHITE 48-72IN
Our Price: $13.78
National Hardware Mail Slot Sleeve, Series: V1911S, Suitable For Use With: National NO 1911 Mail Slot on Hollow Core Doors, 2 in, Steel, Stainless, 2.62 in Width PermaSeam design consists of two structurally strong rolled shapes which telescope for easy adjustment. Closet rods exceed ANSI/BHMA A156.16 Deflection Standards when installed with center supports. Provides support for add-on components in Easy Track closet systems. Can also be used as the backbone of a smaller unit. Secured into wall studs with toggle bolts, this track provides a sturdy support for wall units. Will need the Hardware pack RH1004 not included.
ROD CLOSET BRT 72-120IN       ROD CLOSET ADJ 72-96IN SILVER Closetmaid 21782 Shelf End Wall Bracket
Used to hang clothes and other items. Tubes are made with lock seam construction for strength.  Ends align for easy installation. Visual-pack. Rods sized 48" to 72" and 72" to 120" includes 1-piece central support, and rods sized 96" to 150" include 2-piece central support. Heavy duty preloaded bracket with anchor easily mounts to the wall and holds the end of any size ClosetMaid shelf. Provides side wall support. Supports front lip of shelving where it meets the side wall. For drywall installations. Includes: 2.875"H x 2.125"W x 1.75"D. Material: Resin.
Closetmaid 1770 Back Wall Clip ROD CLOSET ADJ 48-72IN WHITE  SuperSlide 1741 Wall Bracket
Anchors shelf to wall. Ensures stability of shelf. Rods sized 48" to 72" and 72" to 120" includes 1-piece central support, and rods sized 96" to 150" include 2-piece central support. Supports low profile SuperSlide shelving in a wall to wall installation. Includes: 2 wall brackets, 4 pins and 4 anchors. Use in conjunction with support brackets and wall clips for installing wire shelving. Suports front lip of shelving where it meets the side wall. 2"H x 2.19W x 1.75"D. Material: Resin
Knape & Vogt RP0022-72/120 Adjustable Closet Rod National Hardware 309BC Closet Rod ROD CLOSET ADJ 72X120IN SILVER
CLOSET RODS 6FT WHT
Our Price: $16.32
1-1/4" diameter. National Hardware Closet Rod, Series: 309BC, 1-1/4 in Diameter x 6 ft Length, Steel, White, For used to hang clothes and other items Rods sized 48" to 72" and 72" to 120" includes 1-piece central support, and rods sized 96" to 150" include 2-piece central support.
Knape & Vogt BC-0037 Closet Pole Socket Knape & Vogt 8400P16 Full Extension Drawer Slide ROD CLOSET ADJ 72-96IN WHITE
For 1-1/4" diameter closet poles. Fits up to 1-3/8" diameter. Mounting screws included. Medium-duty, precision slides for box drawer or pedestal file drawers up to 24" wide. For frame and frameless construction. May be used horizontal position with a reduced load rating of 30 pounds. Height:1-13/16" Clearance required: 1/2" plus 1/32" minus 0 each side. Features telescoping, full extension on precision steel ball bearings. 32mm hole pattern with direct access mounting. Lever disconnect for easy drawer removal. Ball retainer latch and ramps, for easy drawer insertion. Drawer adjustment without removal. Flexible mounting tabs self-adjust to side clearance. Metal ball retainer holds 3 bearings per inch of race for smooth and quiet motion. Polymer stop cushions. Non-handed. Packaged with screws and installation instructions. Rods sized 48" to 72" and 72" to 120" includes 1-piece central support, and rods sized 96" to 150" include 2-piece central support.
Knape & Vogt 8400P12 Full Extension Drawer Slide Knape & Vogt 8400P14 Full Extension Drawer Slide Knape & Vogt 8400P18 Full Extension Drawer Slide
Medium-duty, precision slides for box drawer or pedestal file drawers up to 24" wide. For frame and frameless construction. May be used horizontal position with a reduced load rating of 30 pounds. Height:1-13/16" Clearance required: 1/2" plus 1/32" minus 0 each side. Features telescoping, full extension on precision steel ball bearings. 32mm hole pattern with direct access mounting. Lever disconnect for easy drawer removal. Ball retainer latch and ramps, for easy drawer insertion. Drawer adjustment without removal. Flexible mounting tabs self-adjust to side clearance. Metal ball retainer holds 3 bearings per inch of race for smooth and quiet motion. Polymer stop cushions. Non-handed. Packaged with screws and installation instructions. Medium-duty, precision slides for box drawer or pedestal file drawers up to 24" wide. For frame and frameless construction. May be used horizontal position with a reduced load rating of 30 pounds. Height:1-13/16" Clearance required: 1/2" plus 1/32" minus 0 each side. Features telescoping, full extension on precision steel ball bearings. 32mm hole pattern with direct access mounting. Lever disconnect for easy drawer removal. Ball retainer latch and ramps, for easy drawer insertion. Drawer adjustment without removal. Flexible mounting tabs self-adjust to side clearance. Metal ball retainer holds 3 bearings per inch of race for smooth and quiet motion. Polymer stop cushions. Non-handed. Packaged with screws and installation instructions. Medium-duty, precision slides for box drawer or pedestal file drawers up to 24" wide. For frame and frameless construction. May be used horizontal position with a reduced load rating of 30 pounds. Height:1-13/16" Clearance required: 1/2" plus 1/32" minus 0 each side. Features telescoping, full extension on precision steel ball bearings. 32mm hole pattern with direct access mounting. Lever disconnect for easy drawer removal. Ball retainer latch and ramps, for easy drawer insertion. Drawer adjustment without removal. Flexible mounting tabs self-adjust to side clearance. Metal ball retainer holds 3 bearings per inch of race for smooth and quiet motion. Polymer stop cushions. Non-handed. Packaged with screws and installation instructions.
Knape & Vogt RP0021-72/120 Adjustable Closet Rod CART LAUNDRY 3-TIER WHITE     Easy Track RR1036 Wardrobe Rod/End
1-1/4" diameter. White finish. For any room. Slim design fits in the smallest spaces. Easy to assemble and takes up minimal floor space. Basket style shelves are large enough to accommodate full size detergent bottles. Dimensions: 23.23 in L x 7.87 in W x 31.3 in. PE coating white. Durable construction for everyday use. Additional wardrobe rods add versatility to any closet. Rods are easy to rearrange to fit your changing needs. (2) 35" adjustable rods and (4) Ends.
Closetmaid 1009 Shelf Support Pole Knape & Vogt 8400P20 Full Extension Drawer Slide Knape & Vogt 8400P22 Full Extension Drawer Slide
Use in place of support brackets when stacking 2 or more shelves. Pre-drilled holes for easy shelf location. Includes: 2 pole pieces (43 in. each) 1 pole joiner, 2 pole caps, and hardware. Material: Epoxy coated steel. Medium-duty, precision slides for box drawer or pedestal file drawers up to 24" wide. For frame and frameless construction. May be used horizontal position with a reduced load rating of 30 pounds. Height:1-13/16" Clearance required: 1/2" plus 1/32" minus 0 each side. Features telescoping, full extension on precision steel ball bearings. 32mm hole pattern with direct access mounting. Lever disconnect for easy drawer removal. Ball retainer latch and ramps, for easy drawer insertion. Drawer adjustment without removal. Flexible mounting tabs self-adjust to side clearance. Metal ball retainer holds 3 bearings per inch of race for smooth and quiet motion. Polymer stop cushions. Non-handed. Packaged with screws and installation instructions. Medium-duty, precision slides for box drawer or pedestal file drawers up to 24" wide. For frame and frameless construction. May be used horizontal position with a reduced load rating of 30 pounds. Height:1-13/16" Clearance required: 1/2" plus 1/32" minus 0 each side. Features telescoping, full extension on precision steel ball bearings. 32mm hole pattern with direct access mounting. Lever disconnect for easy drawer removal. Ball retainer latch and ramps, for easy drawer insertion. Drawer adjustment without removal. Flexible mounting tabs self-adjust to side clearance. Metal ball retainer holds 3 bearings per inch of race for smooth and quiet motion. Polymer stop cushions. Non-handed. Packaged with screws and installation instructions.
ROD CLOSET ADJ 72X120IN WHITE Stanley BB8603 Closet Rod National Hardware 309BC Closet Rod
CLOSET RODS 6FT WHT
Our Price: $21.60
CLOSET RODS 8FT WHT
Our Price: $21.78
Rods sized 48" to 72" and 72" to 120" includes 1-piece central support, and rods sized 96" to 150" include 2-piece central support. Used for basic closet storage while adding a decorative touch. Large diameter offer superior strength and durability. Can be cut to any size using a hacksaw. 2mm thickness; heavy duty. Meets ANSI/BHMA Grade 1 Strength. National Hardware Closet Rod, Series: 309BC, 1-1/4 in Diameter x 8 ft Length, Steel, White, For used to hang clothes and other items
Stanley 833871 Round Closet Rod ROD CLOSET RD STEEL 6FT WHITE CLOSET ROD 3/4IN X 12FT WHITE
For clothes hangers and other hanging accessories. Polybagged. 1.2MM Thickness; Standard Duty. For clothes hangers and other hanging accessories. Polybagged. 1.2MM Thickness; Standard Duty. 3/4" Diameter. Snaps into closet rod support to allow hangers to slide without interruption.
Knape & Vogt 8450FMP 16 Full Extension Soft Close Drawer Slide ROD CLOSET ADJ 96X150IN SILVER Knape & Vogt 8450FMP 18 Full Extension Soft Close Drawer Slide
Designed for use on box drawer applications up to 24" wide where the maximum weight load is not to exceed 100 pounds. Product features a "soft-close" module that eliminates drawer slamming. Clearance required: 1/2" plus 1/23" minus 0". Height: 1-13/16". Rods sized 48" to 72" and 72" to 120" includes 1-piece central support, and rods sized 96" to 150" include 2-piece central support. Designed for use on box drawer applications up to 24" wide where the maximum weight load is not to exceed 100 pounds. Product features a "soft-close" module that eliminates drawer slamming. Clearance required: 1/2" plus 1/23" minus 0". Height: 1-13/16".
Knape & Vogt 8450FMP 20 Full Extension Soft Close Drawer Slide Knape & Vogt 8450FMP 22 Full Extension Soft Close Drawer Slide Stanley 820142 Round Closet Rod
Designed for use on box drawer applications up to 24" wide where the maximum weight load is not to exceed 100 pounds. Product features a "soft-close" module that eliminates drawer slamming. Clearance required: 1/2" plus 1/23" minus 0". Height: 1-13/16". Designed for use on box drawer applications up to 24" wide where the maximum weight load is not to exceed 100 pounds. Product features a "soft-close" module that eliminates drawer slamming. Clearance required: 1/2" plus 1/23" minus 0". Height: 1-13/16". For clothes hangers and other hanging accessories. Polybagged. 1.2MM Thickness; Standard Duty.
Stanley 820076 Round Closet Rod Prime-Line R 7265 Socket Rear Drawer Track Stanley 820100 Round Closet Rod
For clothes hangers and other hanging accessories. Polybagged. 1.2MM Thickness; Standard Duty. Socket depth allows for front to back adjustment of the rail. Used on side mounted drawer track systems. Raw finish. For clothes hangers and other hanging accessories. Polybagged. 1.2MM Thickness; Standard Duty.
M-D 28472 Mail Drop Slot Knape & Vogt BC-0039-3 Closet Pole Socket ROD CLOSET ADJ 96X150IN WHITE
Flap and back plate included. Size: 10"W. For 1-1/4" diameter closet poles. Fits up to 1-3/8" diameter. Mounting screws included. Rods sized 48" to 72" and 72" to 120" includes 1-piece central support, and rods sized 96" to 150" include 2-piece central support.
Easy Track RR1036-CH Wardrobe Rod/End Knape & Vogt BC-0039-WT Closet Pole Socket Stanley BB8604 Closet Rod
CLOSET RODS 8FT WHT
Our Price: $28.16
Durable construction for everyday use. Additional wardrobe rods add versatility to any closet. Rods are easy to rearrange to fit your changing needs. (2) 35" adjustable rods and (4) Ends. For 1-1/4" diameter closet poles. Fits up to 1-3/8" diameter. Mounting screws included. Used for basic closet storage while adding a decorative touch. Large diameter offer superior strength and durability. Can be cut to any size using a hacksaw. 2mm thickness; heavy duty. Meets ANSI/BHMA Grade 1 Strength.
Stanley 833889 Round Closet Rod Easy Track RA1200 Sliding Tie Rack Easy Track RA1202 Sliding Belt Rack
For clothes hangers and other hanging accessories. Polybagged. 1.2MM Thickness; Standard Duty. Keep ties tidy and put them away with ease with this versatile rack. Can be installed on the inside or outside of a vertical panel. Hold up to 20 ties or scarves. Instructions and hardware are included. Chrome Hooks. Holds up to 21 belts, slides out for easy accesss. Can be installed on the inside or outside of a vertical panel. Instructions and hardware are included. Chrome hooks.
Easy Track RA1204 Sliding Wardrobe Rod Schlage SP586P Closet Pole Socket Easy Track RS1423 Shelves
Provides a temporary place for hanging clothes. Great for limited spaces in closets or the laundry room. Rod slides out of the way when it?s not needed. Can be installed on the inside or outside of a vertical panel. Dimensions: 1" H x 1" W x 14" D. Hardware is included. Fits up to 1-3/8" in diameter. Includes one pair of pole sockets. Slim-pak polybagged. Adjustable shelves rest on included pins or can be secured in place. Contains two shelves, can be cut to desired size if needed. Scratch and moisture-resistant surface. Hardware is included.
Easy Track RA1204-CH Sliding Wardrobe Rod ShelfTrack 21775 Shelf Bracket Easy Track 1308 Hanging Wire Basket
Provides a temporary place for hanging clothes. Great for limited spaces in closets or the laundry room. Rod slides out of the way when it?s not needed. Can be installed on the inside or outside of a vertical panel. Dimensions: 1" H x 1" W x 14" D. Hardware is included. Preloaded with #8 pin drive and anchors. No.6606, 71925 and No. 21775. - For Organizer, Wardrobe, SuperSlide and Close Mesh Shelves 12" in depth; and Wardrobe or hanging SuperSlide shelves 16" in depth. No. 26607, 71924, and No.21776 - For Organizer, SuperSlide (in storage application), and Close Mesh shelves 16" in depth. No.26605 - For Organizer, Wardrobe, SuperSlide and Close Mesh Shelves 20" in depth. Organization is easier with see-through storage baskets. Basket pulls out to keep everything within easy reach. Glides install between two vertical panels, hardware and instructions are included.
Stanley 820027 Round Closet Rod ShelfTrack 21776 Shelf Bracket Stanley 820035 Round Closet Rod
For clothes hangers and other hanging accessories. Polybagged. 1.2MM Thickness; Standard Duty. Preloaded with #8 pin drive and anchors. No.6606, 71925 and No. 21775. - For Organizer, Wardrobe, SuperSlide and Close Mesh Shelves 12" in depth; and Wardrobe or hanging SuperSlide shelves 16" in depth. No. 26607, 71924, and No.21776 - For Organizer, SuperSlide (in storage application), and Close Mesh shelves 16" in depth. No.26605 - For Organizer, Wardrobe, SuperSlide and Close Mesh Shelves 20" in depth. For clothes hangers and other hanging accessories. Polybagged. 1.2MM Thickness; Standard Duty.
Schlage SP585F3 Closet Pole Socket Easy Track RS1423-T Shelves Closetmaid 1611 Rolling Cart
Fits up to 1-3/8" in diameter. Includes one pair of pole sockets. Slim-pak polypagged. Adjustable shelves rest on included pins or can be secured in place. Contains two shelves, can be cut to desired size if needed. Scratch and moisture-resistant surface. Hardware is included. Offers 4 fixed basket/shelves. Casters included. Perfect for office, laundry, kitchen, bath or anywhere. All hardware included. 34.62?H x 16.75?W x 12.37?D. Material: Epoxy coated steel.
Easy Track RJ2403 Jewelry/Hosiery Tray National Hardware V1911 Mail Slot Schlage SC620B-716 Mail Slot
Keep jewelry, hosiery or other small items in order. Tray fits into a 4? high drawer. Lined for snag-free storage. Dimensions: 21 -1/2" W x 12-3/4" D x 2-1/4" H. National Hardware Mail Slot, Series: V1911, Suitable For Use With: National NO 1911S Mail Slot on Hollow Doors, 1-1/2 X 7 in, Solid Brass, 8.79 in Length X 2.92 in Width, Includes: (4) NO 7 by 3/4 in Phillips Slot Round Head Screws, For Use On Exterior Entry Doors Spring loaded front plate, standard back plate.  Opening: 11"W x 2"H. Weather-Tite construction featuring interlocking flap and frame. Spring loaded front plate, insures tightly closed position. Overall size: 13" W x 3-9/16"H.
Schlage SC620B-619 Mail Slot Schlage SC620B3 Mail Slot Homebasix SS-120-02-CH 2-Tier Shelf Stacker
Spring loaded front plate, standard back plate.  Opening: 11"W x 2"H. Weather-Tite construction featuring interlocking flap and frame. Spring loaded front plate, insures tightly closed position. Overall size: 13" W x 3-9/16"H. Spring loaded front plate, standard back plate.  Opening: 11"W x 2"H. Weather-Tite construction featuring interlocking flap and frame. Spring loaded front plate, insures tightly closed position. Overall size: 13" W x 3-9/16"H. Adjustable shelves and leveling feet. Easy snap together assembly. Size: 23"H x 23"W x 13"D.
Easy Track 1312 Hanging Wire Basket Easy Track RA1200-T Sliding Tie Rack Easy Track RA1202-T Sliding Belt Rack
Organization is easier with see-through storage baskets. Basket pulls out to keep everything within easy reach. Glides install between two vertical panels, hardware and instructions are included. Keep ties tidy and put them away with ease with this versatile rack. Can be installed on the inside or outside of a vertical panel. Hold up to 20 ties or scarves. Instructions and hardware are included. Chrome Hooks. Holds up to 21 belts, slides out for easy accesss. Can be installed on the inside or outside of a vertical panel. Instructions and hardware are included. Chrome hooks.
Easy Track RS1436 Shelves Easy Track RS1436-T Shelves Easy Track RS1600 Shoe Shelves
Adjustable shelves rest on included pins or can be secured in place. Contains two shelves, can be cut to desired size if needed. Scratch and moisture-resistant surface. Hardware is included. Adjustable shelves rest on included pins or can be secured in place. Contains two shelves, can be cut to desired size if needed. Scratch and moisture-resistant surface. Hardware is included. Place shoes in sight and within reach with slanted shelves.  Chrome rails keep shoes in place. Holds approximately three pairs of shoes per shelf. Contains three shoe shelves. Instructions and hardware are included. Installed Dimensions: 23-7/8" W x 14" D.
DRAWER WHITE 4IN              MAIL SLOTS 2X11IN SLD BRS     National Hardware N325-290 Mail Slot
DRAWER WHITE 4IN
Our Price: $52.49
MAIL SLOTS 2X11IN SLD BRS
Our Price: $53.94
Use with 24" wide shelf sections in the Basic Starter Closet (RB1448), Deluxe Tower Closet (RB1460) or Hanging Tower Kit (RV1472). Drawer glides, hardware, and instructions are included. Include 4 - no.7 x 3/4" Phillips slot round head screws. Spring-action lid seals out weather and dirt. For use on exterior entry doors. Allows mail to be deposited directly into your home. National Hardware Mail Slot, Series: V1911, Suitable For Use With: National NO 1911S Mail Slot on Hollow Doors, 2 X 11 in, Solid Brass, Satin Nickel, 13.05 in Length X 3.59 in Width, Includes: (4) NO 7 by 3/4 in Phillips Slot Round Head Screws, For Use On Exterior Entry Doors
Homebasix G003-CH Storage Cart National Hardware N336-131 Mail Slot Easy Track RS1600-T Shoe Shelves
Rolling  cart with 3 white plastic drawers and mirror polished chrome frame. Size: 25-5/8" x 13" x 15-3/8". National Hardware Mail Slot, Series: V1911, Suitable For Use With: National NO 1911S Mail Slot on Hollow Doors, 2 X 11 in, Solid Brass, Antique Bronze, For Use On Exterior Entry Doors Place shoes in sight and within reach with slanted shelves.  Chrome rails keep shoes in place. Holds approximately three pairs of shoes per shelf. Contains three shoe shelves. Instructions and hardware are included. Installed Dimensions: 23-7/8" W x 14" D.
DRAWER WHITE 8IN              SHELVING BOLTLESS 30WX15DX60H Homebasix G006-CH Storage Cart
DRAWER WHITE 8IN
Our Price: $60.46
Use with 24" wide shelf sections in the Basic Starter Closet (RB1448), Deluxe Tower Closet (RB1460) or Hanging Tower Kit (RV1472). Drawer glides, hardware, and instructions are included. Low profile beams to provide more storage space between shelves. Double rivet beams at top and bottom of unit form a rigid structure. Shelves are adjustable in 1-1/2" increments. No nuts, bolts or shelf clips. For garage, industrial, basement, warehouse and office. 1/4" MDF decking. Commercial strength 16 gauge posts. Can be assembled as a 60" unit or two 30" workbenches. 450 lbs. weight capacity per shelf. Rolling cart with 6 colorful plastic drawers and mirror polished chrome frame. Size: 26" x 13" x 15-3/8".
DRAWER TRUFFLE 4IN            Easy Track RV1447 Vertical Closet Panel CLOSET DRAWER TRUFFLE DLX 8IN
DRAWER TRUFFLE 4IN
Our Price: $62.52
Use with 24" wide shelf sections in the Basic Starter Closet (RB1448), Deluxe Tower Closet (RB1460) or Hanging Tower Kit (RV1472). Drawer glides, hardware, and instructions are included. Two 48? H x 14? D panels, use with Corner Shelves (RS3003) or add panels to a kit including the Basic Starter Closet (RB1448), Deluxe Closet (RB1460), or Hanging Tower (RV1472). Pre-drilled for easy installation & customization.  Scratch and moisture-resistant surface. Use with 24" wide shelf sections in the Basic Starter Closet (RB1448), Deluxe Tower Closet (RB1460) or Hanging Tower Kit (RV1472). Drawer glides, hardware, and instructions are included.
SHELVING BOLTLS MD 5SHLF 450LB Waddell 410DP Closet Pole Socket DRAWER CHERRY 8IN
DRAWER CHERRY 8IN
Our Price: $67.90
Low profile beams to provide more storage space between shelves. Double rivet beams at top and bottom of unit form a rigid structure. Shelves are adjustable in 1-1/2" increments. No nuts, bolts or shelf clips. For garage, industrial, basement, warehouse and office. 1/4" MDF decking. Commercial strength 16 gauge posts. Can be assembled as a 60" unit or two 30" workbenches. 450 lbs. weight capacity per shelf. Fits up to 1-3/8" in diameter closet pole or 1" diameter pipe. Hardwood construction for maximum strength, extra deep holes for dropout prevention. Screws for each part included to make mounting quick, easy, and strong. Includes one pair of pole sockets. Use with 24" wide shelf sections in the Basic Starter Closet (RB1448), Deluxe Tower Closet (RB1460) or Hanging Tower Kit (RV1472). Drawer glides, hardware, and instructions are included.
Easy Track RV1447-T Vertical Closet Panel