Home > HARDWARE > GENERAL HARDWARE > SHELVING & CLOSET > VENTILATED STORAGE SHLVS/CARTS
Sort By:
1
National Hardware MPB107 Pole Socket Set Amerock Allison BP811WD Round Cabinet Knob Amerock Allison BP813WD Round Cabinet Knob
National Hardware Pole Socket Set, Series: MPB107, 0.8 in Depth, 0.13 in Thickness, Polypropylene, White, 90 lb Load Capacity, Suitable For Use With: Upto 1-3/8 in Diameter Pole, Includes: (1) Socket Pair Per Pack and Fasteners, For used to mount wood closet poles Unfinished wood knob. Use with one #8-32 x 1" type screw. Unfinished wood knob. Use with one #8-32 x 1" type screw.
SuperSlide 948 Pre-Loaded Wall Bracket KNOB 1IN 25MM UNFINISHED      National Hardware BPB107 Pole Socket Set
Secures shelf to side wall of closet. Pre-loaded with pins and anchors, no screws needed. Accommodates pole clips and shelf stops in "TotalSlide" system. Use with one #8-32 x 1" type screw. National Hardware Pole Socket Set, Series: BPB107, 0.8 in Depth, 0.13 in Thickness, Polypropylene, White, 90 lb Load Capacity, Suitable For Use With: Upto 1-3/8 in Diameter Pole, Includes: (1) Socket Pair Per Pack and Fasteners, 0.19 in Hole Diameter, For used to mount wood closet poles
SOCKET METAL POLE SAT BRS BG  SOCKET PLASTIC POLE WHITE BG  Amerock Allison BP814WD Round Cabinet Knob
Fits up to 1-3/8" in diameter. Includes one pair of pole sockets and screws. Fits up to 1-3/8" in diameter. Reinforced design allows for interior and exterior uses.  Single screw mounting. Includes one pair of pole sockets and screws. Unfinished wood knob. Use with one #8-32 x 1" type screw.
Prime Line N 6568 Pole Socket National Hardware BPB105 Pole Socket Set Knape & Vogt CD-0019 Closet Pole End Cap
POLE SOCKETS BRS
Our Price: $2.33
Accepts a 1-3/8" diameter standard wood pole. 2-3/16"OD x 3/4" overall. Includes one pair of pole sockets and two No.8 x 3/4" Phillips flat head screws. National Hardware Pole Socket Set, Series: BPB105, 0.38 in Depth, 0.02 in Thickness, Steel, Brass, 400 lb Load Capacity, Suitable For Use With: Upto a 1-3/8 in Diameter Pole, Includes: (1) Socket Pair Per Pack and Fasteners, For Mount Wood Closet Poles Covers up pole ends, keeps hangers from sliding off, friction fit. For use with 1-1/4" diameter pole (except 0023 uses 1" diameter pole).
SCREW MOUNTING CHM FIN        SCREW MOUNTING ORB FIN        SCREW MOUNTING WHITE
MOUNTING SCREWS WHT
Our Price: $2.37
Allows installation of 2 shelf and rod brackets to the wall and 1 shelf to the brackets. Four 1-1/2" pan head screws for mounting brackets to the wall. Four 3/4" pan head screws for mounting shelf to the brackets. For best use install in wall studs. For use with 108 shelf & rod bracket. Allows installation of 2 shelf and rod brackets to the wall and 1 shelf to the brackets. Four 1-1/2" pan head screws for mounting brackets to the wall. Four 3/4" pan head screws for mounting shelf to the brackets. For best use install in wall studs. For use with 108 shelf & rod bracket. Allows installation of 2 shelf and rod brackets to the wall and 1 shelf to the brackets. Four 1-1/2" pan head screws for mounting brackets to the wall. Four 3/4" pan head screws for mounting shelf to the brackets. For best use install in wall studs. For use with 108 shelf & rod bracket.
National Hardware V107 Pole Socket Set SOCKET PLASTIC POLE WHITE CD  SOCKET WOOD POLE NAT WD 1-3/8
National Hardware Pole Socket Set, Series: V107, 0.8 in Depth, 0.13 in Thickness, Polypropylene, White, 90 lb Load Capacity, Suitable For Use With: Upto 1-3/8 in Diameter Pole, Includes: (1) Socket Pair Per Pack and Fasteners, 0.19 in Hole Diameter, For used to mount wood closet poles Fits up to 1-3/8" in diameter. Reinforced design allows for interior and exterior uses.  Single screw mounting. Includes one pair of pole sockets and screws. 1-3/8" diameter. Single screw mounting. Includes two pcs of .75" screws and pole sockets.
Closetmaid 1164XBJ Support Bracket SOCKET METAL POLE SAT BRS CD  SUPPORT ROD CLOSET ZINC PLATED
Closetmaid Support Bracket, 12 in Length, 2 in Width, 2 in Depth, Steel, Epoxy Coated, White, Suitable For Use With: Wire Shelving, Includes: (2) Brackets, (2) Anchors, (2) NO 8 Pins Fits up to 1-3/8" in diameter. Includes one pair of pole sockets and screws. Used to support adjustable closet rods. Includes fasteners. Safe working load: 40 lbs. Visual-pack.
SuperSlide 6609 Pre-Loaded Wall Bracket National Hardware V105 Pole Socket Set Knape & Vogt RP-0044-BWT Non-Adjustable Shelf and Rod Bracket
POLE SOCKETS BRS
Our Price: $2.95
Heavy duty preloaded wall bracket with anchor, mounts to the side wall and holds the end of the SuperSlide shelf and Hang Rod. Supports front lip of shelving and hang rod where they meet the side wall. With pre-loaded pins. For drywall installations. 4.125"H x 1.75"W x 2"D. Material: Resin. National Hardware Pole Socket Set, Series: V105, 0.38 in Depth, 0.02 in Thickness, Steel, Brass, 400 lb Load Capacity, Suitable For Use With: Upto 1-3/8 in Diameter Pole, Includes: (1) Socket Pair Per Pack and Fasteners, 0.16 in Hole Diameter, For used to mount wood closet poles For 11" - 18" deep shelves and rods up to 1-3/8" diameter. Slide-thru feature.
Schlage C907 Decorative Cabinet Hinge HINGE STN NKL 3/4X5/8IN       HINGE ORB 3/4X5/8IN
HINGES 3/4X5/8IN ORB
Our Price: $3.03
Schlage Cabinet Hinge, Decorative, Series: C907, 6 Holes, 1-5/16 in Door Leaf Length, 2-1/4 in Door Leaf Width, Steel, Yellow, Bright Brass, Used in Fine Woodworking Projects National Hardware Hinge, Series: N211, 1/8 in Hole Diameter, 1/32 in Leaf Thickness, 3/4 in Door Leaf Length, 3/4 in Frame Leaf Length, Surface Mounting, 3/4 in Overall Length, 5/8 in Overall Width, Steel, Satin Nickel, Includes: Fasteners Designed for small chests, jewelry boxes, craft projects, etc. Decorative design. Surface mount for easy installation. Fasteners included. Visual-pack.
SOCKET WOOD POLE NAT WD 1-3/8 Closetmaid 6610 Wall Clip BRACKET CLOSET POLE SAT BRASS
1-3/8" diameter. Single screw mounting. Includes two pcs of .75" screws and pole sockets. Anchors shelf to wall. Ensures stability of shelf. Screws included.
Prime Line N 6794 Rod Holder Closet Pole Socket Closetmaid 1002 Joiner Plate SuperSlide 5655 Closet Rod Support
Fits up to 1-3/8" in diameter. Includes one pair of pole sockets with fasteners. Use to join 2 shelves together to create a continuous run of shelving. Supports the joining of 2 wire shelves. One set consists of 2 joiner plates, 1 bolt and 1 nut. NOT for use with Close Mesh shelving. 1.19?H x 2.25?W x 1.13?D. Material: Resin. Converts shelf & rod shelving to a continous slide. Hang rod snaps into bracket to create an continuous slide for hangers. Snaps onto SuperSlide shelf to support hang rod. Use one every 36 in. (91,44cm) of hang rod and at each end of shelf and hang rod. 5.75"H x 0.87"W x 3.87"D. Material: Resin.
HINGE ORB 1X1IN               HINGE STN NKL 1X1IN           SUPPORT ROD CLOSET WHITE
HINGES 1X1IN ORB
Our Price: $3.33
HINGES 1X1IN STN NCKL
Our Price: $3.33
CLOSET ROD SUPPORTS WHT
Our Price: $3.38
Designed for small chests, jewelry boxes, craft projects, etc. Decorative design. Surface mount for easy installation. Fasteners included. Visual-pack. National Hardware Broad Hinge, Series: V1802, 4 Holes, 1/8 in Hole Diameter, 0.8 mm Leaf Thickness, Surface Mounting, 1 in Overall Length, 1 in Overall Width, Steel, Satin Nickel Plated, Includes: Fasteners, For Small Chests, Jewelry Boxes and Craft Projects Used to support adjustable closet rods. Includes fasteners. Safe working load: 40 lbs. Visual-pack.
National Hardware V1813 Decorative Hinge SOCKET POLE WHITE             National Hardware N211-201 Decorative Narrow Hinge
SOCKET POLE WHITE
Our Price: $3.39
National Hardware Decorative Hinge, Series: V1813, 4 Holes, 0.08 in Hole Diameter, 0.02 in Leaf Thickness, 1-1/8 in Door Leaf Length, 1-1/8 in Frame Leaf Length, 0.08 in Diameter Pin, Surface Mounting, Fasteners: Screws, 1-1/8 in Overall Width, Solid Brass, Antique Brass, For Small Chests, Jewelry Boxes and Craft Projects Used to mount wood closet poles. For up to a 1-3/8" diameter pole. Includes 1 socket pair per pack. Includes. National Hardware Narrow Hinge, Decorative, Series: V1800, 4 Holes, 0.14 in Hole Diameter, 0.02 in Leaf Thickness, 3/4 in Door Leaf Length, 3/4 in Frame Leaf Length, 0.08 in Diameter Pin, Surface Mounting, Fasteners: Screws, 2 lb Load Capacity, 5/8 in Overall Width, Solid Brass, Antique Brass, For Small Chests, Jewelry Boxes and Craft Projects
HINGE ANT BRASS 5/8X1IN       National Hardware V1816 Decorative Hinge Schlage C907 Decorative Cabinet Hinge
HINGES 5/8X1IN ANT BRS
Our Price: $3.50
HINGES 5/8X1IN SLD BRS
Our Price: $3.50
National Hardware Decorative Hinge, Series: V1816, 4 Holes, 0.08 in Hole Diameter, 0.02 in Leaf Thickness, 0.08 in Dia Pin, 5/8 in Overall Length, 1 in Overall Width, Solid Brass, Antique Brass National Hardware Decorative Hinge, Series: V1816, 4 Holes, 0.08 in Hole Diameter, 0.02 in Leaf Thickness, 5/8 in Door Leaf Length, 5/8 in Frame Leaf Length, 0.08 in Diameter Pin, Fasteners: Screws, 1 in Overall Width, Solid Brass, Solid Brass Schlage Cabinet Hinge, Decorative, Series: C907, 6 Holes, 1-5/16 in Door Leaf Length, 2-1/4 in Door Leaf Width, Solid Brass, Yellow, Bright Brass, Used in Fine Woodworking Projects
National Hardware N211-185 Decorative Narrow Hinge National Hardware 208BC Shelf and Rod Bracket SuperSlide 75651 Closet Rod Connector
HINGES 1X3/4IN ANT BRS
Our Price: $3.60
SHELF/ROD BRACKETS WHT
Our Price: $3.65
National Hardware Narrow Hinge, Decorative, Series: V1800, 4 Holes, 0.14 in Hole Diameter, 0.02 in Leaf Thickness, 1 in Door Leaf Length, 1 in Frame Leaf Length, 0.08 in Diameter Pin, Surface Mounting, Fasteners: Screws, 2 lb Load Capacity, 3/4 in Overall Width, Solid Brass, Antique Brass, For Small Chests, Jewelry Boxes and Craft Projects National Hardware Shelf and Rod Bracket, Series: 208BC, 12.74 in Length, 9.31 in Width, 0.84 in Depth, 0.22 in Thickness, Steel, White, 125 lb Load Capacity, For used to hold up to 1-3/8 in diameter closet rod Use with SuperSlide shelving to create uninterrupted sliding action around corners for walk-in closets. Keeps hangers from sliding off exposed ends. Support the connection of the two pieces of hang rod with a hang bar support. 2"H x 0.5"W x 0.5"D. Material: Plastic.
Closetmaid 6620 Wall Bracket National Hardware V1811 Decorative Hinge National Hardware N211-193 Decorative Narrow Hinge
Heavy duty preloaded bracket with anchor easily mounts to the wall and holds the end of any size ClosetMaid shelf. Provides side wall support. Supports front lip of shelving where it meets the side wall. For drywall installations. Includes: 2.875"H x 2.125"W x 1.75"D. Material: Resin. National Hardware Decorative Hinge, Series: V1811, 5 Holes, 0.08 in Hole Diameter, 0.02 in Leaf Thickness, 5/8 in Door Leaf Length, 5/8 in Frame Leaf Length, 0.08 in Diameter Pin, Surface Mounting, Fasteners: Screws, 1-7/8 in Overall Width, Solid Brass, Solid Brass, For Small Chests, Jewelry Boxes and Craft Projects National Hardware Narrow Hinge, Decorative, Series: V1800, 4 Holes, 0.14 in Hole Diameter, 0.02 in Leaf Thickness, 3/4 in Door Leaf Length, 3/4 in Frame Leaf Length, 0.08 in Diameter Pin, Surface Mounting, Fasteners: Screws, 2 lb Load Capacity, 5/8 in Overall Width, Solid Brass, Solid Brass, For Small Chests, Jewelry Boxes and Craft Projects
National Hardware N211-417 Decorative Hinge National Hardware N211-425 Decorative Hinge HINGE ORB 1-1/2X1-1/4IN
National Hardware Decorative Hinge, Series: V1810, 6 Holes, 0.08 in Hole Diameter, 0.02 in Leaf Thickness, 5/8 in Door Leaf Length, 5/8 in Frame Leaf Length, 0.08 in Diameter Pin, Fasteners: Screws, 2-3/4 in Overall Width, Solid Brass, Solid Brass National Hardware Decorative Hinge, Series: V1810, 6 Holes, 0.08 in Hole Diameter, 0.02 in Leaf Thickness, 5/8 in Door Leaf Length, 5/8 in Frame Leaf Length, 0.08 in Diameter Pin, Fasteners: Screws, 2-3/4 in Overall Width, Solid Brass, Antique Brass Designed for small chests, jewelry boxes, craft projects, etc. Decorative design. Surface mount for easy installation. Fasteners included. Visual-pack.
HINGE STN NKL 1-1/2X1-1/4IN   Knape & Vogt RP-0043-WT Adjustable Shelf and Rod Bracket National Hardware DPB103 Pole Socket Set
National Hardware Broad Hinge, Series: V1802, 4 Holes, 11/64 in Hole Diameter, 0.8 mm Leaf Thickness, Surface Mounting, 1-1/2 in Overall Length, 1-1/4 in Overall Width, Steel, Satin Nickel Plated, Includes: Fasteners, For Small Chests, Jewelry Boxes and Craft Projects For 11" - 14" deep shelves and rods up to 1-3/8" diameter. Slide thru and snap-in pole features. National Hardware Pole Socket Set, Series: DPB103, Wood, Natural, 120 lb Load Capacity, Suitable For Use With: Upto 1-3/8 in Diameter Pole, Includes: Fasteners, For used to mount wood closet poles
National Hardware 108BC Shelf and Rod Bracket HINGE ORB 2X1-3/8IN           HINGE STN NKL 2X1-3/8IN
SHELF BRACKETS WHT
Our Price: $3.97
HINGES 2X1-3/8IN ORB
Our Price: $3.98
National Hardware Shelf and Rod Bracket, Series: 108BC, 12.45 in Length, 10.87 in Width, 1 in Depth, 0.1 in Thickness, Steel, White, 125 lb Load Capacity, For Mounting Shelves and Closet Rods in Closets and Storage Rooms Designed for small chests, jewelry boxes, craft projects, etc. Decorative design. Surface mount for easy installation. Fasteners included. Visual-pack. National Hardware Broad Hinge, Series: V1802, 6 Holes, 5/32 in Hole Diameter, 1.2 mm Leaf Thickness, Surface Mounting, 2 in Overall Length, 1-3/8 in Overall Width, Steel, Satin Nickel Plated, Includes: Fasteners, For Small Chests, Jewelry Boxes and Craft Projects
Shepherd 9547 Square Lazy Susan Turntable National Hardware N211-342 Decorative Broad Hinge Closetmaid 1180 Support Bracket
HINGES 1X1IN ANT BRS
Our Price: $4.01
Ball-bearing for rotating book racks, business machine stands, serving trays, kitchen storage racks, etc. National Hardware Broad Hinge, Decorative, Series: V1802, 4 Holes, 0.14 in Hole Diameter, 0.02 in Leaf Thickness, 1 in Door Leaf Length, 1 in Frame Leaf Length, 0.08 in Diameter Pin, Surface Mounting, Fasteners: Screws, 2 lb Load Capacity, 1 in Overall Width, Solid Brass, Antique Brass, For Small Chests, Jewelry Boxes and Craft Projects Closetmaid Support Bracket, 12 in Length, 2 in Width, 2 in Depth, Steel, Epoxy Coated, White, Suitable For Use With: Wire Shelving, Includes: (1) Support Bracket, (1) Anchor, (1) NO 8 Pin
National Hardware V1801 Narrow Hinge SuperSlide 6641 Wall Bracket National Hardware V103 Pole Socket Set
National Hardware Narrow Hinge, Series: V1801, 0.14 in Hole Diameter, 0.02 in Leaf Thickness, 3/4 in Door Leaf Length, 3/4 in Frame Leaf Length, 0.08 in Diameter Pin, Wall Mounting, Fasteners: Screws, 2 lb Load Capacity, 11/16 in Overall Width, Solid Brass, For Bookcases and Kitchen Cabinets Supports low profile SuperSlide shelving in a wall to wall installation. Includes: 2 wall brackets, 4 pins and 4 anchors. Use in conjunction with support brackets and wall clips for installing wire shelving. Suports front lip of shelving where it meets the side wall. 2"H x 2.19W x 1.75"D. Material: Resin National Hardware Pole Socket Set, Series: V103, Wood, Natural, 120 lb Load Capacity, Suitable For Use With: Upto 1-3/8 in Diameter Pole, Includes: Fasteners, For used to mount wood closet poles
Closetmaid 1001 Corner Support Bracket National Hardware N211-177 Decorative Narrow Hinge National Hardware N211-219 Decorative Narrow Hinge
HINGES 1X3/4IN SLD BRS
Our Price: $4.26
Supports front lip of shelving to keep it level where it meets another shelf in a corner. Snap in place design. For corner installations.  0.375?H x 5?W x 0.75?D. Material: steel, coated with epoxy. National Hardware Narrow Hinge, Decorative, Series: V1800, 4 Holes, 0.14 in Hole Diameter, 0.02 in Leaf Thickness, 1 in Door Leaf Length, 1 in Frame Leaf Length, 0.08 in Diameter Pin, Surface Mounting, Fasteners: Screws, 2 lb Load Capacity, 3/4 in Overall Width, Solid Brass, Solid Brass, For Small Chests, Jewelry Boxes and Craft Projects National Hardware Narrow Hinge, Decorative, Series: V1800, 4 Holes, 0.16 in Hole Diameter, 0.04 in Leaf Thickness, 1-1/2 in Door Leaf Length, 1-1/2 in Frame Leaf Length, 0.1 in Diameter Pin, Surface Mounting, Fasteners: Screws, 5 lb Load Capacity, 7/8 in Overall Width, Solid Brass, Solid Brass, For Small Chests, Jewelry Boxes and Craft Projects
National Hardware N211-227 Decorative Narrow Hinge Knape & Vogt RP-0045-WT Non-Adjustable Shelf and Rod Bracket National Hardware N211-821 Decorative Hinge
National Hardware Narrow Hinge, Decorative, Series: V1800, 4 Holes, 0.16 in Hole Diameter, 0.04 in Leaf Thickness, 1-1/2 in Door Leaf Length, 1-1/2 in Frame Leaf Length, 0.1 in Diameter Pin, Surface Mounting, Fasteners: Screws, 5 lb Load Capacity, 7/8 in Overall Width, Solid Brass, Antique Brass, For Small Chests, Jewelry Boxes and Craft Projects For 11" - 18" deep shelves and rods up to 1-3/8" diameter. Slide-thru feature. National Hardware Decorative Hinge, Series: V1814, 6 Holes, 0.21 in Hole Diameter, 0.04 in Leaf Thickness, 1.36 in Door Leaf Length, 1.36 in Frame Leaf Length, 0.1 in Diameter Pin, Fasteners: Screws, 2-1/4 in Overall Width, Solid Brass, Solid Brass
National Hardware N211-839 Decorative Hinge National Hardware V1802 Decorative Broad Hinge National Hardware V1801 Narrow Hinge
HINGES 3/4X1IN SLD BRS
Our Price: $4.56
National Hardware Decorative Hinge, Series: V1814, 6 Holes, 0.21 in Hole Diameter, 0.04 in Leaf Thickness, 1.36 in Door Leaf Length, 1.36 in Frame Leaf Length, 0.1 in Diameter Pin, Fasteners: Screws, 2-1/4 in Overall Width, Solid Brass, Antique Brass National Hardware Broad Hinge, Decorative, Series: V1802, 4 Holes, 0.14 in Hole Diameter, 0.02 in Leaf Thickness, 3/4 in Door Leaf Length, 3/4 in Frame Leaf Length, 0.08 in Diameter Pin, Surface Mounting, Fasteners: Screws, 2 lb Load Capacity, 1 in Overall Width, Solid Brass, Solid Brass, For Small Chests, Jewelry Boxes and Craft Projects National Hardware Narrow Hinge, Series: V1801, 0.16 in Hole Diameter, 0.04 in Leaf Thickness, 1-1/2 in Door Leaf Length, 1-1/2 in Frame Leaf Length, 0.1 in Diameter Pin, Wall Mounting, Fasteners: Screws, 5 lb Load Capacity, 1 in Overall Width, Solid Brass, For Bookcases and Kitchen Cabinets
National Hardware V1801 Narrow Hinge National Hardware N211-334 Decorative Broad Hinge National Hardware V1818 Decorative Hinge
HINGES 1X1IN SLD BRS
Our Price: $4.85
National Hardware Narrow Hinge, Series: V1801, 0.14 in Hole Diameter, 0.02 in Leaf Thickness, 1 in Door Leaf Length, 1 in Frame Leaf Length, 0.08 in Diameter Pin, Wall Mounting, Fasteners: Screws, 2 lb Load Capacity, 13/16 in Overall Width, Solid Brass, For Bookcases and Kitchen Cabinets National Hardware Broad Hinge, Decorative, Series: V1802, 4 Holes, 0.14 in Hole Diameter, 0.02 in Leaf Thickness, 1 in Door Leaf Length, 1 in Frame Leaf Length, 0.08 in Diameter Pin, Surface Mounting, Fasteners: Screws, 2 lb Load Capacity, 1 in Overall Width, Solid Brass, Solid Brass, For Small Chests, Jewelry Boxes and Craft Projects National Hardware Decorative Hinge, Series: V1818, 6 Holes, 0.16 in Hole Diameter, 0.04 in Leaf Thickness, 3/4 in Door Leaf Length, 3/4 in Frame Leaf Length, 0.1 in Diameter Pin, Fasteners: Screws, 1-13/16 in Overall Width, Solid Brass, Solid Brass
National Hardware N211-359 Decorative Broad Hinge National Hardware N211-367 Decorative Broad Hinge Schlage C907 Decorative Cabinet Hinge
National Hardware Broad Hinge, Decorative, Series: V1802, 4 Holes, 0.16 in Hole Diameter, 0.04 in Leaf Thickness, 1-1/2 in Door Leaf Length, 1-1/2 in Frame Leaf Length, 0.04 in Diameter Pin, Surface Mounting, Fasteners: Screws, 5 lb Load Capacity, 1-1/4 in Overall Width, Solid Brass, Solid Brass, For Small Chests, Jewelry Boxes and Craft Projects National Hardware Broad Hinge, Decorative, Series: V1802, 4 Holes, 0.16 in Hole Diameter, 0.04 in Leaf Thickness, 1-1/2 in Door Leaf Length, 1-1/2 in Frame Leaf Length, 0.04 in Diameter Pin, Surface Mounting, Fasteners: Screws, 5 lb Load Capacity, 1-1/4 in Overall Width, Solid Brass, Antique Brass, For Small Chests, Jewelry Boxes and Craft Projects Schlage Cabinet Hinge, Decorative, Series: C907, 6 Holes, 1-3/4 in Door Leaf Length, 3 in Door Leaf Width, Solid Brass, Antique Brass
National Hardware N211-235 Decorative Narrow Hinge National Hardware N211-243 Decorative Narrow Hinge Stanley 234971 Adjustable Shelf and Rod Bracket
HINGES 2X1IN SLD BRS
Our Price: $5.24
HINGES 2X1IN ANT BRS
Our Price: $5.24
National Hardware Narrow Hinge, Decorative, Series: V1800, 6 Holes, 0.21 in Hole Diameter, 0.04 in Leaf Thickness, 2 in Door Leaf Length, 2 in Frame Leaf Length, 0.1 in Diameter Pin, Surface Mounting, Fasteners: Screws, 5 lb Load Capacity, 1 in Overall Width, Solid Brass, Solid Brass, For Small Chests, Jewelry Boxes and Craft Projects National Hardware Narrow Hinge, Decorative, Series: V1800, 6 Holes, 0.21 in Hole Diameter, 0.04 in Leaf Thickness, 2 in Door Leaf Length, 2 in Frame Leaf Length, 0.1 in Diameter Pin, Surface Mounting, Fasteners: Screws, 5 lb Load Capacity, 1 in Overall Width, Solid Brass, Antique Brass, For Small Chests, Jewelry Boxes and Craft Projects Sturdy, shelf support and clothes rod hanger is designed for shelves 12" or larger. Embossed for extra strength. Brackets are punched for #12 wood screws. Adjusts 3/4" for use with or without hook strip. Holds up to 1-3/8" diameter rod. Rod mounts on 3" drop. Includes screws.
Solar RMB20R00 Round Post Mailbox Bracket National Hardware V1801 Narrow Hinge Amerock BP2355AE Furniture Trim Butt Hinge
For mounting standard size mailboxes to round steel mailbox posts. Fits most standard size mailboxes. Constructed from galvanized steel. Includes mailbox mounting hardware and instructions. National Hardware Narrow Hinge, Series: V1801, 0.21 in Hole Diameter, 0.04 in Leaf Thickness, 2 in Door Leaf Length, 2 in Frame Leaf Length, 0.1 in Diameter Pin, Wall Mounting, Fasteners: Screws, 5 lb Load Capacity, 1-3/16 in Overall Width, Solid Brass, For Bookcases and Kitchen Cabinets Polybagged.
Closetmaid 7561 U-Shape Shelf Clip Stanley S822-094 Shelf/Rod Bracket National Hardware N211-854 Decorative Hinge
SHELF/ROD BRACKETS WHT
Our Price: $5.58
Attaches to the back of shelving to anchor shelf to back wall. Shelf clip "locks" shelving into place - attaching it at the top and bottom of shelf wire with or instead of wall clips. For concrete/stud and drywall installation. Material: Metal. Designed for mounting shelves and closet rods in closets, storage rooms, etc. Rod mounts on 3 inch drop for easy hanger use. Mount to stud for optimal load capacity. Punched for #12 wood screws. Bulk bagged. National Hardware Decorative Hinge, Series: V1814, 6 Holes, 0.23 in Hole Diameter, 0.04 in Leaf Thickness, 1.7 in Door Leaf Length, 1.7 in Frame Leaf Length, 0.1 in Diameter Pin, Fasteners: Screws, 3.06 in Overall Width, Solid Brass, Antique Brass
National Hardware N211-847 Decorative Hinge Closetmaid 26607 Support Bracket Knape & Vogt RP0022-18/30 Adjustable Closet Rod
National Hardware Decorative Hinge, Series: V1814, 6 Holes, 0.23 in Hole Diameter, 0.04 in Leaf Thickness, 1.7 in Door Leaf Length, 1.7 in Frame Leaf Length, 0.1 in Diameter Pin, Fasteners: Screws, 3.06 in Overall Width, Solid Brass, Solid Brass Preloaded with #8 pin drive and anchors. No.6606, 71925 and No. 21775. - For Organizer, Wardrobe, SuperSlide and Close Mesh Shelves 12" in depth; and Wardrobe or hanging SuperSlide shelves 16" in depth. No. 26607, 71924, and No.21776 - For Organizer, SuperSlide (in storage application), and Close Mesh shelves 16" in depth. No.26605 - For Organizer, Wardrobe, SuperSlide and Close Mesh Shelves 20" in depth. 1-1/4" diameter.
Shepherd 9548 Square Lazy Susan Turntable National Hardware N211-375 Decorative Broad Hinge National Hardware N211-383 Decorative Broad Hinge
Ball-bearing for rotating book racks, business machine stands, serving trays, kitchen storage racks, etc. National Hardware Broad Hinge, Decorative, Series: V1802, 6 Holes, 0.04 in Leaf Thickness, 2 in Door Leaf Length, 2 in Frame Leaf Length, 0.01 in Diameter Pin, Surface Mounting, Fasteners: Screws, 5 lb Load Capacity, 1-3/8 in Overall Width, Solid Brass, Solid Brass, For Small Chests, Jewelry Boxes and Craft Projects National Hardware Broad Hinge, Decorative, Series: V1802, 6 Holes, 0.04 in Leaf Thickness, 2 in Door Leaf Length, 2 in Frame Leaf Length, 0.01 in Diameter Pin, Surface Mounting, Fasteners: Screws, 5 lb Load Capacity, 1-3/8 in Overall Width, Solid Brass, Antique Brass, For Small Chests, Jewelry Boxes and Craft Projects
TURNTABLE LAZY SUSAN 6IN 500LB ROD CLOSET ADJ 30-48IN SILVER HINGE ANT BRASS 1-1/2X1-1/4IN
Use for table and countertops or inside cabinets. Rods sized 48" to 72" and 72" to 120" includes 1-piece central support, and rods sized 96" to 150" include 2-piece central support. Designed for small chests, jewelry boxes, craft projects, etc. Surface mount for easy installation. Screws included. Clear lacquer protective coating. Visual-pack.
ROD CLOSET ADJ 18-30IN SILVER National Hardware N211-250 Decorative Narrow Hinge National Hardware N211-268 Decorative Narrow Hinge
Rods sized 48" to 72" and 72" to 120" includes 1-piece central support, and rods sized 96" to 150" include 2-piece central support. National Hardware Narrow Hinge, Decorative, Series: V1800, 6 Holes, 0.22 in Hole Diameter, 0.05 in Leaf Thickness, 2-1/2 in Door Leaf Length, 2-1/2 in Frame Leaf Length, 0.1 in Diameter Pin, Surface Mounting, Fasteners: Screws, 6 lb Load Capacity, 1.13 in Overall Width, Solid Brass, Solid Brass, For Small Chests, Jewelry Boxes and Craft Projects National Hardware Narrow Hinge, Decorative, Series: V1800, 6 Holes, 0.22 in Hole Diameter, 0.05 in Leaf Thickness, 2-1/2 in Door Leaf Length, 2-1/2 in Frame Leaf Length, 0.1 in Diameter Pin, Surface Mounting, Fasteners: Screws, 6 lb Load Capacity, 1-1/8 in Overall Width, Solid Brass, Antique Brass, For Small Chests, Jewelry Boxes and Craft Projects
Closetmaid 7546 Down Clip/Anchor National Hardware V1805 Decorative Desk Hinge ROD CLOSET BRT 18-30IN
Attaches to the back of shelving to anchor shelf to back wall. For concrete/stud and drywall installation. Package includes 12 clips, 12 anchors and 12 #8 screws. National Hardware Desk Hinge, Decorative, Series: V1805, 6 Holes, 0.21 in Hole Diameter, 0.04 in Leaf Thickness, 1-1/2 in Door Leaf Length, 1-1/2 in Frame Leaf Length, 0.1 in Diameter Pin, Surface, Flush Mounting, Fasteners: Screws, 5 lb Load Capacity, 2 in Overall Width, Solid Brass, For Desks, Lids, Chests, Cabinets and Table Leaves Used to hang clothes and other items. Tubes are made with lock seam construction for strength.  Ends align for easy installation. Visual-pack.
National Hardware N135-301 Decorative Cabinet Hinge HINGE ANT BRASS 1-1/2X7/8IN   Knape & Vogt 0018-4WT3 1-Piece 3 Pole Closet Rod
National Hardware Cabinet Hinge, Decorative, Series: V485, 6 Holes, 0.05 in Leaf Thickness, 1.66 in Door Leaf Length, 1-1/4 in Door Leaf Width, 1.66 in Frame Leaf Length, 1-1/4 in Frame Leaf Width, 1/8 in Diameter Pin, Surface Mounting, 8 lb Load Capacity, 2.81 in Overall Length, 2.81 in Overall Width, 0.05 in Overall Depth, Cold Rolled Steel National Hardware Ball Tip Hinge, Series: V1816, 4 Holes, 0.16 in Hole Diameter, 0.04 in Leaf Thickness, 1-1/2 in Door Leaf Length, 0.1 in Dia Pin, Surface Mounting, 5 lb Load Capacity, 7/8 in Overall Length, 2 in Overall Width, Solid Brass, Antique Brass, Includes: Solid Brass Screws, For Small Chests, Jewelry Boxes and Craft Projects 1-1/4" Diameter.
Stanley V8600 Closet Flange Set Closetmaid 26605 Support Bracket Stanley V8600 Closet Flange Set
FLANGE SET WHITE
Our Price: $6.62
FLANGE SET ORB FINISH
Our Price: $7.14
Used to support closet rods. Includes one open and one closed socket. Open socket allows you to install the sockets before inserting a closet rod. Fits 1-1/4 in. to 1-5/16 in. diameter pole. Includes mounting screws for easy installation. Preloaded with #8 pin drive and anchors. No.6606, 71925 and No. 21775. - For Organizer, Wardrobe, SuperSlide and Close Mesh Shelves 12" in depth; and Wardrobe or hanging SuperSlide shelves 16" in depth. No. 26607, 71924, and No.21776 - For Organizer, SuperSlide (in storage application), and Close Mesh shelves 16" in depth. No.26605 - For Organizer, Wardrobe, SuperSlide and Close Mesh Shelves 20" in depth. Used to support closet rods. Includes one open and one closed socket. Open socket allows you to install the sockets before inserting a closet rod. Fits 1-1/4 in. to 1-5/16 in. diameter pole. Includes mounting screws for easy installation.
National Hardware V1801 Narrow Hinge Knape & Vogt RP0021-18/30 Adjustable Closet Rod National Hardware N211-391 Decorative Broad Hinge
National Hardware Narrow Hinge, Series: V1801, 0.23 in Hole Diameter, 0.05 in Leaf Thickness, 2-1/2 in Door Leaf Length, 2-1/2 in Frame Leaf Length, 0.1 in Diameter Pin, Wall Mounting, Fasteners: Screws, 6 lb Load Capacity, 1-9/16 in Overall Width, Solid Brass, For Bookcases and Kitchen Cabinets 1-1/4" diameter. White finish. National Hardware Broad Hinge, Decorative, Series: V1802, 6 Holes, 0.23 in Hole Diameter, 0.05 in Leaf Thickness, 2-1/2 in Door Leaf Length, 2-1/2 in Frame Leaf Length, 0.01 in Diameter Pin, Surface Mounting, Fasteners: Screws, 6 lb Load Capacity, 13/4 in Overall Width, Solid Brass, Solid Brass, For Small Chests, Jewelry Boxes and Craft Projects
National Hardware N211-409 Decorative Broad Hinge National Hardware N261-768 Decorative Ball Tip Hinge National Hardware N213-553 Decorative Ball Tip Hinge
National Hardware Broad Hinge, Decorative, Series: V1802, 6 Holes, 0.23 in Hole Diameter, 0.05 in Leaf Thickness, 2-1/2 in Door Leaf Length, 2-1/2 in Frame Leaf Length, 0.01 in Diameter Pin, Surface Mounting, Fasteners: Screws, 6 lb Load Capacity, 1-3/4 in Overall Width, Solid Brass, Antique Brass, For Small Chests, Jewelry Boxes and Craft Projects National Hardware Ball Tip Hinge, Decorative, Series: V1806, 6 Holes, 0.21 in Hole Diameter, 0.04 in Leaf Thickness, 2 in Door Leaf Length, 2 in Frame Leaf Length, 0.1 in Diameter Pin, Surface Mounting, Fasteners: Screws, 5 lb Load Capacity, 2-1/2 in Overall Length, 1-3/8 in Overall Width, Solid Brass, Solid Brass, For Small Chests National Hardware Ball Tip Hinge, Decorative, Series: V1806, 6 Holes, 0.21 in Hole Diameter, 0.04 in Leaf Thickness, 2 in Door Leaf Length, 2 in Frame Leaf Length, 0.1 in Diameter Pin, Surface Mounting, Fasteners: Screws, 5 lb Load Capacity, 2-1/2 in Overall Length, 1-3/8 in Overall Width, Solid Brass, Antique Brass, For Small Chests
ROD CLOSET ADJ 18-30IN WHITE  Stanley V8600 Closet Flange Set Stanley V8600 Closet Flange Set
Rods sized 48" to 72" and 72" to 120" includes 1-piece central support, and rods sized 96" to 150" include 2-piece central support. Used to support closet rods. Includes one open and one closed socket. Open socket allows you to install the sockets before inserting a closet rod. Fits 1-1/4 in. to 1-5/16 in. diameter pole. Includes mounting screws for easy installation. Used to support closet rods. Includes one open and one closed socket. Open socket allows you to install the sockets before inserting a closet rod. Fits 1-1/4 in. to 1-5/16 in. diameter pole. Includes mounting screws for easy installation.
Closetmaid 6606 Support Bracket National Hardware V1812 Decorative Hinge Knape & Vogt RP-0495-WT Non-Adjustable Shelf and Rod Bracket
Preloaded with #8 pin drive and anchors. No.6606, 71925 and No. 21775. - For Organizer, Wardrobe, SuperSlide and Close Mesh Shelves 12" in depth; and Wardrobe or hanging SuperSlide shelves 16" in depth. No. 26607, 71924, and No.21776 - For Organizer, SuperSlide (in storage application), and Close Mesh shelves 16" in depth. No.26605 - For Organizer, Wardrobe, SuperSlide and Close Mesh Shelves 20" in depth. National Hardware Decorative Hinge, Series: V1812, 6 Holes, 0.22 in Hole Diameter, 0.06 in Leaf Thickness, 1-5/16 in Door Leaf Length, 1-5/16 in Frame Leaf Length, 0.15 in Diameter Pin, Surface Mounting, Fasteners: Screws, 2-7/8 in Overall Width, Solid Brass, Solid Brass, For Desks, Lids, Chests, Cabinets and Table Leaves Holds up to 500 pounds.Slide thru and snap-in pole features.
Knape & Vogt RP0022-30/48 Adjustable Closet Rod Prime Line N7050 Closet Pole Bracket National Hardware N135-335 Decorative Cabinet Hinge
1-1/4" diameter. Painted diecast. Includes one pair of pole sockets and screws. National Hardware Cabinet Hinge, Decorative, Series: V485, 6 Holes, 0.05 in Leaf Thickness, 1.66 in Door Leaf Length, 1-1/4 in Door Leaf Width, 1.66 in Frame Leaf Length, 1-1/4 in Frame Leaf Width, 1/8 in Diameter Pin, Surface Mounting, 8 lb Load Capacity, 2.81 in Overall Length, 2.81 in Overall Width, 0.05 in Overall Depth, Cold Rolled Steel
National Hardware V629 Flush/Full Inset Cabinet Hinge ROD CLOSET BRT 30-48IN        CAP END WHITE
END CAP WHITE
Our Price: $8.68
National Hardware Cabinet Hinge, Flush/Full Inset, Series: V629, 6 Holes, 0.23 in Hole Diameter, 0.06 in Leaf Thickness, 2-1/2 in Door Leaf Length, 2-1/2 in Frame Leaf Length, Removable Pin, 0.13 in Diameter Pin, 20 lb Load Capacity, 2-1/2 in Overall Width, Cold Rolled Steel, Brass, Includes: Mounting Screws, 170 deg Opening Used to hang clothes and other items. Tubes are made with lock seam construction for strength.  Ends align for easy installation. Visual-pack. Used to cover the ends of closet rods while adding a decorative touch. Prevents hangers from sliding off the wall. Fits 1-1/4 in. to 1-5/16 in. diameter pole. Includes set screws to secure the end cap to the closet rod.
National Hardware N135-194 Decorative Cabinet Hinge National Hardware V1805 Decorative Desk Hinge Knape & Vogt RP0021-30/48 Adjustable Closet Rod
CABINET HINGES 1IN BRS
Our Price: $8.76
National Hardware Cabinet Hinge, Decorative, Series: V475, 6 Holes, 0.05 in Leaf Thickness, 1-5/8 in Door Leaf Length, 1-1/2 in Door Leaf Width, 1-5/8 in Frame Leaf Length, 1-1/2 in Frame Leaf Width, Surface Mounting, 8 lb Load Capacity, 3 in Overall Width, Cold Rolled Steel, Brass, For Commercial/Industrial and Residential Applications National Hardware Desk Hinge, Decorative, Series: V1805, 6 Holes, 0.24 in Hole Diameter, 0.06 in Leaf Thickness, 2 in Door Leaf Length, 2 in Frame Leaf Length, 0.15 in Diameter Pin, Surface, Flush Mounting, Fasteners: Screws, 11 lb Load Capacity, 3-1/16 in Overall Width, Solid Brass, For Desks, Lids, Chests, Cabinets and Table Leaves 1-1/4" diameter. White finish.
Amerock TMPMULTI Cabinet Door and Drawer Template Stanley S822-092 Shelf/Rod Bracket CAP END CHRM FIN
END CAP CHROME FINISH
Our Price: $9.36
Alignment guide for mounting cabinet knobs and pulls on cabinet drawers and doors. For standard pull mounting of 3" (76mm), 3-3/4" (96mm), and 5" (128mm) hole spacing. Includes: (1) template for drawers, (1) template for doors, (1) drill bit and Easy to read instructions. Designed for mounting shelves and closet rods in closets, storage rooms, etc. Rod mounts on 3 inch drop for easy hanger use. Mount to stud for optimal load capacity. Punched for #12 wood screws. Bulk bagged. Used to cover the ends of closet rods while adding a decorative touch. Prevents hangers from sliding off the wall. Fits 1-1/4 in. to 1-5/16 in. diameter pole. Includes set screws to secure the end cap to the closet rod.
CAP END ORB FIN               Knape & Vogt RP0022-48/72 Adjustable Closet Rod Stanley S822-091 Shelf/Rod Bracket
END CAP ORB FINISH
Our Price: $9.36
Used to cover the ends of closet rods while adding a decorative touch. Prevents hangers from sliding off the wall. Fits 1-1/4 in. to 1-5/16 in. diameter pole. Includes set screws to secure the end cap to the closet rod. 1-1/4" diameter. Designed for mounting shelves and closet rods in closets, storage rooms, etc. Rod mounts on 3 inch drop for easy hanger use. Mount to stud for optimal load capacity. Punched for #12 wood screws. Bulk bagged.
Stanley S822-093 Shelf/Rod Bracket CAP END STN NKL FN            Knape & Vogt 0018-6WT3 1-Piece 3 Pole Closet Rod
END CAP STN NCKL FINISH
Our Price: $10.00
Designed for mounting shelves and closet rods in closets, storage rooms, etc. Rod mounts on 3 inch drop for easy hanger use. Mount to stud for optimal load capacity. Punched for #12 wood screws. Bulk bagged. Used to cover the ends of closet rods while adding a decorative touch. Prevents hangers from sliding off the wall. Fits 1-1/4 in. to 1-5/16 in. diameter pole. Includes set screws to secure the end cap to the closet rod. 1-1/4" Diameter.
ROD CLOSET WHITE 30-48IN      ROD CLOSET BRT 48-72IN        ROD CLOSET ADJ 48-72IN SILVER
ROD CLOSET WHITE 30-48IN
Our Price: $10.61
ROD CLOSET BRT 48-72IN
Our Price: $11.39
PermaSeam design consists of two structurally strong rolled shapes which telescope for easy adjustment. Closet rods exceed ANSI/BHMA A156.16 Deflection Standards when installed with center supports. Used to hang clothes and other items.Tubes are made with lock seam construction for strength. Rods sized 48" to 72" and 72" to 120" includes 1-piece central support, and rods sized 96" to 150" include 2-piece central support.
ROD CLOSET ADJ 30-48IN WHITE  Shepherd 9549 Round Lazy Susan Turntable National Hardware 309BC Closet Rod
CLOSET RODS 4FT WHT
Our Price: $11.81
Rods sized 48" to 72" and 72" to 120" includes 1-piece central support, and rods sized 96" to 150" include 2-piece central support. Ball-bearing for rotating book racks, business machine stands, serving trays, kitchen storage racks, etc. National Hardware Closet Rod, Series: 309BC, 1-1/4 in Diameter x 4 ft Length, Steel, White, For used to hang clothes and other items
Knape & Vogt RP0021-48/72 Adjustable Closet Rod Closetmaid 7556 U Clip ROD CLOSET WHITE 48-72IN
ROD CLOSET WHITE 48-72IN
Our Price: $13.08
1-1/4" diameter. White finish. Attaches to the back of shelving to anchor shelf to back wall. Shelf clip "locks" shelving into place - attaching it at the top and bottom of shelf wire with or instead of wall clips. For concrete/stud and drywall installation. Material: Metal. PermaSeam design consists of two structurally strong rolled shapes which telescope for easy adjustment. Closet rods exceed ANSI/BHMA A156.16 Deflection Standards when installed with center supports.
Knape & Vogt 0018-8WT3 1-Piece 3 Pole Closet Rod ROD CLOSET BRT 72-120IN       TURNTABLE LAZYSUSAN 12IN1000LB
1-1/4" Diameter. Used to hang clothes and other items. Tubes are made with lock seam construction for strength.  Ends align for easy installation. Visual-pack. Use for table and countertops or inside cabinets.
ROD CLOSET ADJ 72-96IN SILVER Knape & Vogt RP0022-72/120 Adjustable Closet Rod Closetmaid 21782 Shelf End Wall Bracket
Rods sized 48" to 72" and 72" to 120" includes 1-piece central support, and rods sized 96" to 150" include 2-piece central support. 1-1/4" diameter. Heavy duty preloaded bracket with anchor easily mounts to the wall and holds the end of any size ClosetMaid shelf. Provides side wall support. Supports front lip of shelving where it meets the side wall. For drywall installations. Includes: 2.875"H x 2.125"W x 1.75"D. Material: Resin.
Closetmaid 1770 Back Wall Clip ROD CLOSET ADJ 48-72IN WHITE  National Hardware 309BC Closet Rod
CLOSET RODS 6FT WHT
Our Price: $15.50
Anchors shelf to wall. Ensures stability of shelf. Rods sized 48" to 72" and 72" to 120" includes 1-piece central support, and rods sized 96" to 150" include 2-piece central support. National Hardware Closet Rod, Series: 309BC, 1-1/4 in Diameter x 6 ft Length, Steel, White, For used to hang clothes and other items
SuperSlide 1741 Wall Bracket Knape & Vogt BC-0037 Closet Pole Socket ROD CLOSET ADJ 72X120IN SILVER
Supports low profile SuperSlide shelving in a wall to wall installation. Includes: 2 wall brackets, 4 pins and 4 anchors. Use in conjunction with support brackets and wall clips for installing wire shelving. Suports front lip of shelving where it meets the side wall. 2"H x 2.19W x 1.75"D. Material: Resin For 1-1/4" diameter closet poles. Fits up to 1-3/8" diameter. Mounting screws included. Rods sized 48" to 72" and 72" to 120" includes 1-piece central support, and rods sized 96" to 150" include 2-piece central support.
ROD CLOSET ADJ 72-96IN WHITE  Knape & Vogt RP0021-72/120 Adjustable Closet Rod CART LAUNDRY 3-TIER WHITE
Rods sized 48" to 72" and 72" to 120" includes 1-piece central support, and rods sized 96" to 150" include 2-piece central support. 1-1/4" diameter. White finish. For any room. Slim design fits in the smallest spaces. Easy to assemble and takes up minimal floor space. Basket style shelves are large enough to accommodate full size detergent bottles. Dimensions: 23.23 in L x 7.87 in W x 31.3 in. PE coating white.
Closetmaid 1009 Shelf Support Pole ROD CLOSET ADJ 72X120IN WHITE Stanley BB8603 Closet Rod
CLOSET RODS 6FT WHT
Our Price: $20.52
Use in place of support brackets when stacking 2 or more shelves. Pre-drilled holes for easy shelf location. Includes: 2 pole pieces (43 in. each) 1 pole joiner, 2 pole caps, and hardware. Material: Epoxy coated steel. Rods sized 48" to 72" and 72" to 120" includes 1-piece central support, and rods sized 96" to 150" include 2-piece central support. Used for basic closet storage while adding a decorative touch. Large diameter offer superior strength and durability. Can be cut to any size using a hacksaw. 2mm thickness; heavy duty. Meets ANSI/BHMA Grade 1 Strength.
National Hardware 309BC Closet Rod Stanley 833871 Round Closet Rod CLOSET ROD 3/4IN X 12FT WHITE
CLOSET RODS 8FT WHT
Our Price: $20.68
National Hardware Closet Rod, Series: 309BC, 1-1/4 in Diameter x 8 ft Length, Steel, White, For used to hang clothes and other items For clothes hangers and other hanging accessories. Polybagged. 1.2MM Thickness; Standard Duty. 3/4" Diameter. Snaps into closet rod support to allow hangers to slide without interruption.
Solar PBK Round Mailbox Post ROD CLOSET ADJ 96X150IN SILVER Stanley 820076 Round Closet Rod
Round post with decorative scrolls. Made from steel with a rust-resistant powder coated finish. Designed for in-ground installation with concrete. Recommended with standard size mailboxes. Size: 52.1"H x 6"W x 10.7"D. Rods sized 48" to 72" and 72" to 120" includes 1-piece central support, and rods sized 96" to 150" include 2-piece central support. For clothes hangers and other hanging accessories. Polybagged. 1.2MM Thickness; Standard Duty.
TURNTABLE LAZY SUSAN 4IN 300LB Stanley 820100 Round Closet Rod Stanley 820142 Round Closet Rod
Use for table and countertops or inside cabinets. For clothes hangers and other hanging accessories. Polybagged. 1.2MM Thickness; Standard Duty. For clothes hangers and other hanging accessories. Polybagged. 1.2MM Thickness; Standard Duty.
Knape & Vogt BC-0039-3 Closet Pole Socket Knape & Vogt BC-0039-WT Closet Pole Socket Stanley BB8604 Closet Rod
CLOSET RODS 8FT WHT
Our Price: $26.74
For 1-1/4" diameter closet poles. Fits up to 1-3/8" diameter. Mounting screws included. For 1-1/4" diameter closet poles. Fits up to 1-3/8" diameter. Mounting screws included. Used for basic closet storage while adding a decorative touch. Large diameter offer superior strength and durability. Can be cut to any size using a hacksaw. 2mm thickness; heavy duty. Meets ANSI/BHMA Grade 1 Strength.
ROD CLOSET ADJ 96X150IN WHITE Stanley 833889 Round Closet Rod ROD CLOSET RD STEEL 6FT WHITE
Rods sized 48" to 72" and 72" to 120" includes 1-piece central support, and rods sized 96" to 150" include 2-piece central support. For clothes hangers and other hanging accessories. Polybagged. 1.2MM Thickness; Standard Duty. For clothes hangers and other hanging accessories. Polybagged. 1.2MM Thickness; Standard Duty.
Schlage SP586P Closet Pole Socket Stanley 820027 Round Closet Rod ShelfTrack 21775 Shelf Bracket
Fits up to 1-3/8" in diameter. Includes one pair of pole sockets. Slim-pak polybagged. For clothes hangers and other hanging accessories. Polybagged. 1.2MM Thickness; Standard Duty. Preloaded with #8 pin drive and anchors. No.6606, 71925 and No. 21775. - For Organizer, Wardrobe, SuperSlide and Close Mesh Shelves 12" in depth; and Wardrobe or hanging SuperSlide shelves 16" in depth. No. 26607, 71924, and No.21776 - For Organizer, SuperSlide (in storage application), and Close Mesh shelves 16" in depth. No.26605 - For Organizer, Wardrobe, SuperSlide and Close Mesh Shelves 20" in depth.
Stanley 820035 Round Closet Rod SHELF/ROD SUPPORT STD WHITE   Universal Forest 82897/106053 Standard Pressure Mail Box Post
For clothes hangers and other hanging accessories. Polybagged. 1.2MM Thickness; Standard Duty. For use with closet rods up to 1-3/8" diameter. Corrugated steel for extra strength. Sturdy two piece design facilitates installation. Size: 12-3/4" x 9-1/4". UPC labeled. Standard post. Grade #1 Southern Yellow Pine. Prowood Micro CA mold inhibitor. Pre-assembled for easy set-up. 4" x 4" wood construction. Size: 72"H x 4"W x 4"D.
ShelfTrack 21776 Shelf Bracket Schlage SP585F3 Closet Pole Socket Closetmaid 1611 Rolling Cart
Preloaded with #8 pin drive and anchors. No.6606, 71925 and No. 21775. - For Organizer, Wardrobe, SuperSlide and Close Mesh Shelves 12" in depth; and Wardrobe or hanging SuperSlide shelves 16" in depth. No. 26607, 71924, and No.21776 - For Organizer, SuperSlide (in storage application), and Close Mesh shelves 16" in depth. No.26605 - For Organizer, Wardrobe, SuperSlide and Close Mesh Shelves 20" in depth. Fits up to 1-3/8" in diameter. Includes one pair of pole sockets. Slim-pak polypagged. Offers 4 fixed basket/shelves. Casters included. Perfect for office, laundry, kitchen, bath or anywhere. All hardware included. 34.62?H x 16.75?W x 12.37?D. Material: Epoxy coated steel.
SHELF/ROD STD WHT 12-5/8X9-3/4 Universal Forest 82907/106054 Octagon Mailbox Post Homebasix SS-120-02-CH 2-Tier Shelf Stacker
For use with closet rods up to 1-3/8" in diameter. Size: 12-5/8" x 9-3/4". Convenient one-piece construction. UPC labeled. Grade #1, southern yellow pine. Prowood Micro CA mold inhibitor. LifeGuard, water repellent pressure treatment. Size: 72"H x 4"W x 4"D. Adjustable shelves and leveling feet. Easy snap together assembly. Size: 23"H x 23"W x 13"D.
Knape & Vogt PB-0023-UPC Center Rod Support SuperSlide 4714 Wire Shelf POST DRIVE-IN  KT BLK
Mounting hardware included. Carded. Durable vinyl coated steel rods. All purpose storage shelf. 1" deep. Drive-in mailbox post does not require digging or concreting for installation. Constructed from rust-resistant galvanized steel with a black powdered paint finish. Features an adjustable mailbox support arm, which allows the mailbox to be adjusted to the proper height from the ground. Post accommodates standard and large size mailboxes. Kit includes all assembly and mailbox mounting hardware and instructions. Size: 59.9"H x 6"W x 20.8"D.
Solar PP500W00 Deluxe Mailbox Post Tie Down 43016 Mailbox Post Kit Solar MB115B Roughneck Mailbox Post
Deluxe decorative post with a durable multi-use mailbox mounting support which can hold either one or two mailboxes. Constructed from heavy-duty white plastic makes this a maintenance and rust-free post. It installs over a 4x4 wood post (sold separately) and accommodates standard or large size mailboxes. Kit includes a mounting bracket and hardware for easy installation. Size: 57?H x 6?W x 22.7?D. Mailbox post kit requires no cement for installation and installs easily without a posthole digger and shovel. Simply screw the anchor into the ground. Kit includes: Stabilizer plate and earth anchor. Earth anchor holds post firmly to the ground. Patented stablizer plate prevents post from leaning. Sturdy all weather construction. Mailbox not included. Fits all standard rural No. 1 and 1-1/2 size mailboxes. Made in the USA. Constructed from durable non-rust polymer. No digging or concrete mixing required for installation. Ground mount and mailbox bracket included. Fits standard sized mailboxes. Size: 41.3"H x 6.3"W x 17"D.
Homebasix G003-CH Storage Cart Waddell 410DP Closet Pole Socket SuperSlide 4717 Wire Shelf
Rolling  cart with 3 white plastic drawers and mirror polished chrome frame. Size: 25-5/8" x 13" x 15-3/8". Fits up to 1-3/8" in diameter closet pole or 1" diameter pipe. Hardwood construction for maximum strength, extra deep holes for dropout prevention. Screws for each part included to make mounting quick, easy, and strong. Includes one pair of pole sockets. Durable vinyl coated steel rods. All purpose storage shelf. 1" deep.
Homebasix G006-CH Storage Cart Homebasix G005-CH Storage Cart Homebasix SS-JR0404-WH 4-Tier Shelf Stacker
Rolling cart with 6 colorful plastic drawers and mirror polished chrome frame. Size: 26" x 13" x 15-3/8". Rolling cart with 5 white plastic drawers and mirror polished chrome frame. Size: 38-1/4" x 13" x 15-3/8". Adjustable shelves and leveling feet. Easy snap together assembly. Size: 48-1/4"H x 31"W x 13"D .
Closetmaid 1361 Wardrobe Shelf Waddell 408DP Economy Closet Pole Socket SuperSlide 4735 Linen Organizer Wire Shelf
Sturdy ventilated vinyl coated steel wire construction. Economical Shelf & Rod shelving provides shelf and hanging space for bedroom, laundry or where extra space is needed. No need to purchase a hang rod, it is constructed into the shelving unit. Support brackets and wall anchors sold separately. Fits up to 1-3/8" in diameter closet pole or 1" diameter pipe. Hardwood construction for maximum strength, extra deep holes for dropout prevention. Screws for each part included to make mounting quick, easy, and strong. Made from linden wood. Includes one pair of pole sockets. Ventilated design keeps clothing and linens fresh. Add SuperSlide hardware components to convert to a hanging shelf where hangers slide continuously. Use SuperSlide shelf by itself for storage. Install shelf inverted with lip up to create shoe shelf. Sturdy vinyl coated steel wire construction.
Closetmaid 6201 Drawer Kit Closetmaid 21066 Shelf and Rod Corner Kit Closetmaid 1363 Wardrobe Shelf
Kit includes 4 baskets - a 4 in. deep and three 7 in. deep baskets, 7-runner frame set and crossbars. Tops, casters, and other accessories sold separately. Smooth gliding action. All hardware included. 29.318"H x 17.8"W x 21.019"D. Material: Epoxy coated steel. By installing in corner with shelves connecting, this shelf creates a usable corner so that hangers continue around corner. Installation hardware for corner shelf included. Shelving sold separately. Steel coated with vinyl. Sturdy ventilated vinyl coated steel wire construction. Economical Shelf & Rod shelving provides shelf and hanging space for bedroom, laundry or where extra space is needed. No need to purchase a hang rod, it is constructed into the shelving unit. Support brackets and wall anchors sold separately.
SuperSlide 4719 Wire Shelf Closetmaid 8279 Laundry Shelf Closetmaid 1078 Shelf and Rod Wire Shelf
Ventilated design keeps clothing and linens fresh. Add SuperSlide hardware components to convert to a hanging shelf where hangers slide continuously. Use SuperSlide shelf by itself for storage. Install shelf inverted with lip up to create shoe shelf. Sturdy vinyl coated steel wire construction. Ventilated wire shelf with space for hangers. Wire spacing provides storage for small items or books. Installation hardware included. Material: Epoxy coated steel. Sturdy ventilated vinyl coated steel wire construction. Economical Shelf & Rod shelving provides shelf and hanging space for bedroom, laundry or where extra space is needed. No need to purchase a hang rod, it is constructed into the shelving unit. Support brackets and wall anchors sold separately.
Closetmaid 37300 Wardrobe Shelf Closetmaid 1395 Close Mesh Wire Shelf Closetmaid 21067 Corner Shelf Kit
Sturdy ventilated vinyl coated steel wire construction. Economical Shelf & Rod shelving provides shelf and hanging space for bedroom, laundry or where extra space is needed. No need to purchase a hang rod, it is constructed into the shelving unit. Support brackets and wall anchors sold separately. Sturdy vinyl coated steel wire construction.Wires are spaced 5/8 in. apart versus the 1 in. on our other wire shelving. Keeps small items in the pantry from tipping over. Install with the ShelfTrack system and create a fully adjustable pantry. Installation hardware sold separately. Can be cut to custom lengths. By installing in corner with shelves connecting, this shelf creates a usable corner so that hangers continue around corner. Installation hardware for corner shelf included. Shelving sold separately. Steel coated with vinyl.
Closetmaid 1396 Close Mesh Wire Shelf SuperSlide 4737 Linen Wire Shelf Closetmaid 3732521 Linen Shelf
Sturdy vinyl coated steel wire construction.Wires are spaced 5/8 in. apart versus the 1 in. on our other wire shelving. Keeps small items in the pantry from tipping over. Install with the ShelfTrack system and create a fully adjustable pantry. Installation hardware sold separately. Can be cut to custom lengths. Durable vinyl coated steel rods. All purpose storage shelf. 1" deep. Ventilated design keeps clothing and linens fresh. Add SuperSlide hardware components to convert to a hanging shelf where hangers slide continuously. Use SuperSlide shelf by itself for storage. Install shelf inverted with lip up to create shoe shelf. Sturdy vinyl coated steel wire construction.
Closetmaid 37305 Wardrobe Shelf Closetmaid 1103 Support Bracket Closetmaid 37318 Close Mesh Wire Shelf
Sturdy ventilated vinyl coated steel wire construction. Economical Shelf & Rod shelving provides shelf and hanging space for bedroom, laundry or where extra space is needed. No need to purchase a hang rod, it is constructed into the shelving unit. Support brackets and wall anchors sold separately. No. 103: Use with 10", 12" and 16" Shelf & Rod, and 12" Linen. No. 106: For Linen shelves 16" in depth.  Bulk pack. Sturdy vinyl coated steel wire construction.Wires are spaced 5/8 in. apart versus the 1 in. on our other wire shelving. Keeps small items in the pantry from tipping over. Install with the ShelfTrack system and create a fully adjustable pantry. Installation hardware sold separately. Can be cut to custom lengths.
Closetmaid 37402 Close Mesh Wire Shelf Closetmaid 1166 Support Bracket Closetmaid 932 Pre-Loaded End Bracket