Home > HARDWARE > GENERAL HARDWARE > SHELVING & CLOSET > VENTILATED SHELVING KITS
Sort By:
1
Amerock Allison BP802PBK Round Cabinet Knob National Hardware MPB107 Pole Socket Set Amerock Allison BP802PW Round Cabinet Knob
Knob with 1-1/4" diameter x 3/4" height. Use with one #8-32 x 1" type screw. National Hardware Pole Socket Set, Series: MPB107, 0.8 in Depth, 0.13 in Thickness, Polypropylene, White, 90 lb Load Capacity, Suitable For Use With: Upto 1-3/8 in Diameter Pole, Includes: (1) Socket Pair Per Pack and Fasteners, For used to mount wood closet poles Knob with 1-1/4" diameter x 3/4" height. Use with one #8-32 x 1" type screw.
National Hardware BPB107 Pole Socket Set Prime Line R 7133 Drawer Track Backplate Closetmaid 01016 End Cap
National Hardware Pole Socket Set, Series: BPB107, 0.8 in Depth, 0.13 in Thickness, Polypropylene, White, 90 lb Load Capacity, Suitable For Use With: Upto 1-3/8 in Diameter Pole, Includes: (1) Socket Pair Per Pack and Fasteners, 0.19 in Hole Diameter, For used to mount wood closet poles Can be inverted for self-adjusting application, used on rolled edge and other center mounted tracks. Vinyl end cap provides protection from cut end of wire shelving that exposes possible rough edges. Large end caps cover the large rod, 0 gauge, .25"H x .4"W x .4"D. Small end caps are for the 4 gauge wire, .2"H x .2"W x .2"D. Designed to be used with ClosetMaid - Shelf & Rod shelving.
SuperSlide 5629 Closet Rod Support SOCKET METAL POLE SAT BRS BG  Prime Line R 7085 Drawer Track Guide Kit
SuperSlide shelving and hardware allows hangers to slide freely on both Fixed Mount and ShelfTrack mounting systems. Hangers slide without interruption. Snaps onto SuperSlide shelf to support hang rod. Use one every 36 in. of hang rod and at each end of shelf and hang rod. 5.75"H x 0.87"W x 3.87"D. Material: Resin Fits up to 1-3/8" in diameter. Includes one pair of pole sockets and screws. Polyethylene guide and white polyethylene side saddles, restores smooth operation to track mounted drawers. Fits a 9/32" x 1-1/8" track.
Prime Line R 7152 Drawer Track Guide Kit Prime Line R 7154 Drawer Track Guide Kit SOCKET PLASTIC POLE WHITE BG
Polyethylene guide and white polyethylene side saddles, restores smooth operation to track mounted drawers. Fits a 9/32" x 1-1/8" track. Yellow polyethylene guide and white polyethylene side saddles, restores smooth operation to track mounted drawers. Fits a 3/32" x 1-9/32" track. Contents: 2 guides, 4 side saddles, and 2 sets of installation fasteners. Fits up to 1-3/8" in diameter. Reinforced design allows for interior and exterior uses.  Single screw mounting. Includes one pair of pole sockets and screws.
Prime Line R 7145 Drawer Track Backplate Prime Line R 7084 Drawer Track Guide Kit Prime Line R 7082 Drawer Track Guide Kit
Used to hold track to back of cabinet; fits most popular side mount rails. Contents: 2 backplates; 2 sets of installation screws. Brown polyethylene guide and white polyethylene side saddles, restores smooth operation to track mounted drawers. Fits a 1/4" x 7/8" track. Contents: 2 guides, 4 side saddles, and 2 sets of installation fasteners. Red polyethylene guide and white polyethylene side saddles, restores smooth operation to track mounted drawers. Fits a 9/32" x 3/4" track. Contents: 2 guides, 4 side saddles, and 2 sets of installation fasteners.
Prime Line N 6568 Pole Socket Prime Line R 7130 Drawer Track Guide Kit Prime Line R 7131 Drawer Track Back Socket
Accepts a 1-3/8" diameter standard wood pole. 2-3/16"OD x 3/4" overall. Includes one pair of pole sockets and two No.8 x 3/4" Phillips flat head screws. Purple polyethylene guide and white side saddles. Guides used for aligning drawer and making for a smoother operation. Fits a 3/32" x 1-3/16" track. Contents: 2 guides, 4 side saddles, and 2 sets of installation fasteners. Designed for use with metal rolled-edge tracks. Mounts horizontally or vertically. Used on Amerock Tri-roller drawer slide track. (Track fits snug).
National Hardware BPB105 Pole Socket Set SOCKET PLASTIC POLE WHITE CD  SCREW MOUNTING CHM FIN
POLE SOCKETS BRS
Our Price: $2.44
National Hardware Pole Socket Set, Series: BPB105, 0.38 in Depth, 0.02 in Thickness, Steel, Brass, 400 lb Load Capacity, Suitable For Use With: Upto a 1-3/8 in Diameter Pole, Includes: (1) Socket Pair Per Pack and Fasteners, For Mount Wood Closet Poles Fits up to 1-3/8" in diameter. Reinforced design allows for interior and exterior uses.  Single screw mounting. Includes one pair of pole sockets and screws. Allows installation of 2 shelf and rod brackets to the wall and 1 shelf to the brackets. Four 1-1/2" pan head screws for mounting brackets to the wall. Four 3/4" pan head screws for mounting shelf to the brackets. For best use install in wall studs. For use with 108 shelf & rod bracket.
SCREW MOUNTING ORB FIN        SCREW MOUNTING WHITE          National Hardware V107 Pole Socket Set
MOUNTING SCREWS WHT
Our Price: $2.50
Allows installation of 2 shelf and rod brackets to the wall and 1 shelf to the brackets. Four 1-1/2" pan head screws for mounting brackets to the wall. Four 3/4" pan head screws for mounting shelf to the brackets. For best use install in wall studs. For use with 108 shelf & rod bracket. Allows installation of 2 shelf and rod brackets to the wall and 1 shelf to the brackets. Four 1-1/2" pan head screws for mounting brackets to the wall. Four 3/4" pan head screws for mounting shelf to the brackets. For best use install in wall studs. For use with 108 shelf & rod bracket. National Hardware Pole Socket Set, Series: V107, 0.8 in Depth, 0.13 in Thickness, Polypropylene, White, 90 lb Load Capacity, Suitable For Use With: Upto 1-3/8 in Diameter Pole, Includes: (1) Socket Pair Per Pack and Fasteners, 0.19 in Hole Diameter, For used to mount wood closet poles
SOCKET WOOD POLE NAT WD 1-3/8 SOCKET METAL POLE SAT BRS CD  Knape & Vogt 1284-4WP Rear Mouth Socket Rear Mounting Bracket
1-3/8" diameter. Single screw mounting. Includes two pcs of .75" screws and pole sockets. Fits up to 1-3/8" in diameter. Includes one pair of pole sockets and screws. Optional bracket for use with draw slide No.1284.
SUPPORT ROD CLOSET ZINC PLATED SOCKET WOOD POLE NAT WD 1-3/8 National Hardware V105 Pole Socket Set
POLE SOCKETS BRS
Our Price: $3.09
Used to support adjustable closet rods. Includes fasteners. Safe working load: 40 lbs. Visual-pack. 1-3/8" diameter. Single screw mounting. Includes two pcs of .75" screws and pole sockets. National Hardware Pole Socket Set, Series: V105, 0.38 in Depth, 0.02 in Thickness, Steel, Brass, 400 lb Load Capacity, Suitable For Use With: Upto 1-3/8 in Diameter Pole, Includes: (1) Socket Pair Per Pack and Fasteners, 0.16 in Hole Diameter, For used to mount wood closet poles
BRACKET SUPPORT SHOE SHELF WHT Knape & Vogt RP-0044-BWT Non-Adjustable Shelf and Rod Bracket BRACKET CLOSET POLE SAT BRASS
For wire shelving, converts almost any wire shelf to a shoe shelf. Make a shoe shelf by inverting shelf, lip facing up. Holds shoes away from wall at an angle. Use 1 shoe support bracket every 24 in. Does not work with Close Mesh shelving. 6.125"H x 1.25"W x 4.75"D. For 11" - 18" deep shelves and rods up to 1-3/8" diameter. Slide-thru feature. Screws included.
Prime Line R 7147 Flat Stepped Drawer Guide Roller Assembly Amerock Traditional Classics 14303CB Crystal Cabinet Knob Prime Line N 6794 Rod Holder Closet Pole Socket
Rollers mount at the front of the drawer opening, and help center the drawer. This allows for smoother operation. Flat stepped roller edge type, mixed materials. Includes 1 left hand roller, 1 right hand roller, and 1 set of installation fasteners. Knob with 1-1/4" diameter. Use with one #8-32 x 1" type screw. Fits up to 1-3/8" in diameter. Includes one pair of pole sockets with fasteners.
Prime Line R 7148 Convex Drawer Track Roller SUPPORT ROD CLOSET WHITE      SOCKET POLE WHITE
CLOSET ROD SUPPORTS WHT
Our Price: $3.55
SOCKET POLE WHITE
Our Price: $3.56
Steel bracket, convex plastic roller mounts on rear of drawer. Used as center roller for monorail drawer slide systems. Contains: 2 roller assemblies, 2 sets of installation screws. Used to support adjustable closet rods. Includes fasteners. Safe working load: 40 lbs. Visual-pack. Used to mount wood closet poles. For up to a 1-3/8" diameter pole. Includes 1 socket pair per pack. Includes.
BRACKET RR MT F/MDL 84-8450 ZN Prime Line R 7141 Drawer Track Roller National Hardware 208BC Shelf and Rod Bracket
SHELF/ROD BRACKETS WHT
Our Price: $3.84
Optional rear mounting socket for face frame application simplifies installation. Non handed. Hardware included.  3-1/2" L x 0.50"W. Zinc finish. Steel bracket, convex plastic roller mounts on rear of drawer. Used as center roller for monorail drawer slide systems. Contains: 2 roller assemblies, 2 sets of installation screws. National Hardware Shelf and Rod Bracket, Series: 208BC, 12.74 in Length, 9.31 in Width, 0.84 in Depth, 0.22 in Thickness, Steel, White, 125 lb Load Capacity, For used to hold up to 1-3/8 in diameter closet rod
Prime Line R 7132 Drawer Track Back Roller with Plastic Roller BRACKET RR MT F/MDL TT100 ZINC Knape & Vogt RP-0043-WT Adjustable Shelf and Rod Bracket
Steel bracket, convex plastic roller mounts on rear of drawer. Used as center roller for monorail drawer slide systems. Contents: 2 roller assemblies, 2 sets of installation screws. Optional rear mounting socket for face frame application simplifies installation. Non handed. Hardware included.  3-1/2" L x 0.50"W. Zinc finish. For 11" - 14" deep shelves and rods up to 1-3/8" diameter. Slide thru and snap-in pole features.
National Hardware DPB103 Pole Socket Set National Hardware 108BC Shelf and Rod Bracket BRACKET REAR MNT F/MDL 1805 ZN
SHELF BRACKETS WHT
Our Price: $4.17
National Hardware Pole Socket Set, Series: DPB103, Wood, Natural, 120 lb Load Capacity, Suitable For Use With: Upto 1-3/8 in Diameter Pole, Includes: Fasteners, For used to mount wood closet poles National Hardware Shelf and Rod Bracket, Series: 108BC, 12.45 in Length, 10.87 in Width, 1 in Depth, 0.1 in Thickness, Steel, White, 125 lb Load Capacity, For Mounting Shelves and Closet Rods in Closets and Storage Rooms Pair of rear brackets (left and right) for the 1805 epoxy-coated drawer slide features a 2-3/8" socket.
National Hardware V103 Pole Socket Set Shepherd 9547 Square Lazy Susan Turntable Prime Line R 7240 Right Hand/Left Hand Drawer Track Back Plate
National Hardware Pole Socket Set, Series: V103, Wood, Natural, 120 lb Load Capacity, Suitable For Use With: Upto 1-3/8 in Diameter Pole, Includes: Fasteners, For used to mount wood closet poles Ball-bearing for rotating book racks, business machine stands, serving trays, kitchen storage racks, etc. White nylon; 2-3/4"socket depth allows 2"of front to back adjustment of the rail; used on side mounted drawer track systems. Raw finish. Contents: 1 left hand bracket; 1 right hand bracket; 2 sets of installation screws. NOTE: Right side has a larger lip.
Knape & Vogt RP-0045-WT Non-Adjustable Shelf and Rod Bracket Amerock Traditional Classics 14303G10 Acrylic Round Crystal Cabinet Knob Amerock Traditional Classics 14303ORB Acrylic Round Crystal Cabinet Knob
For 11" - 18" deep shelves and rods up to 1-3/8" diameter. Slide-thru feature. Knob with 1-1/4" diameter. Use with one #8-32 x 1" type screw. Knob with 1-1/4" diameter. Use with one #8-32 x 1" type screw.
SuperSlide 75638 Closet Rod End Cap Prime-Line R 7321 Drawer Track Guide and Glide Prime Line R 7125 Undermount Drawer Track Kit
For use with ClosetMaid, SuperSlide wire shelving. Prevents hangers from sliding off end of closet hang rod. Insert into end of the hang rod.Two end caps per package. 0.5"H x 0.5"W x 0.5"D. Material: Resin. Used on furniture drawer systems; for dressers, hutches and night stand drawers. Opening for metal track on larger piece measures 15/16" x 3/32". Kit includes 2 dark-brown, plastic track case guides and 2 track guides, 4 white, plastic corner glides, 8 ring shank nails for nailing in corner glides (3/4" x 14-1/2 ga.), and 8 Phillips drive, pan head screws for installation of guides (#6 x 5/8"). Rolled edge galvanized steel track with polyethylene guides and nylon front rollers. Track may be cut down for shorter drawer and can be used for top or bottom mount installations. Contents: 1 track; 1 front plate; 1 back plate; 1 drawer guide; 2 front rollers; 1 set of installation fasteners.
Knape & Vogt 1805HWH400 Euro Self-Close Drawer Slide Stanley 234971 Adjustable Shelf and Rod Bracket Knape & Vogt 1805HWH450 Euro Self-Close Drawer Slide
Specially designed for use in kitchen cabinet, commercial millwork, home office and RTA furniture applications. Adaptable to face frame or 32mm mounting. Single captive roller limits side play for improved lateral stability. Positive double out-stop. Positive in-stop. Lift-out disconnect. Four way adjustment slots. Positive lock-open position. Cabinet member side mounts. Additional rear mounting socket available for face frame applications. Drawer member fastens to either side or bottom of drawer. Height 1.4". Required Clearance; Side: 1/2" plus 1/32" minus 0 each side. Top:1" required for drawer lift out. Bottom: None drawer can rest on cabinet. Packed with screws and installation instructions. Maximum drawer width 18". Sturdy, shelf support and clothes rod hanger is designed for shelves 12" or larger. Embossed for extra strength. Brackets are punched for #12 wood screws. Adjusts 3/4" for use with or without hook strip. Holds up to 1-3/8" diameter rod. Rod mounts on 3" drop. Includes screws. Specially designed for use in kitchen cabinet, commercial millwork, home office and RTA furniture applications. Adaptable to face frame or 32mm mounting. Single captive roller limits side play for improved lateral stability. Positive double out-stop. Positive in-stop. Lift-out disconnect. Four way adjustment slots. Positive lock-open position. Cabinet member side mounts. Additional rear mounting socket available for face frame applications. Drawer member fastens to either side or bottom of drawer. Height 1.4". Required Clearance; Side: 1/2" plus 1/32" minus 0 each side. Top:1" required for drawer lift out. Bottom: None drawer can rest on cabinet. Packed with screws and installation instructions. Maximum drawer width 18".
Knape & Vogt 1175P ZC 20 Light Duty Single Track Drawer Slide SLIDE DRWR 75LB 300MM WHT 12IN Knape & Vogt 1175P ZC 22-5/8 Light Duty Single Track Drawer Slide
Light-Duty slide designed for general drawer applications. Mounts with staples or screws. Height: 1". Required Clearance:1/8" each side; 1-1/2" from rear of drawer to cabinet; drawer to be 3/8" shallower than opening. High density polyethylene rollers. Drawers lift out for easy removal. Packaged with screws and installation instructions. Specially designed for use in kitchen cabinet, commercial millwork, home office and RTA furniture applications. Adaptable to face frame or 32mm mounting. Single captive roller limits side play for improved lateral stability. Positive double out-stop. Positive in-stop. Lift-out disconnect. Four way adjustment slots. Positive lock-open position. Cabinet member side mounts. Additional rear mounting socket available for face frame applications. Drawer member fastens to either side or bottom of drawer. Height 1.4". Required Clearance; Side: 1/2" plus 1/32" minus 0 each side. Top:1" required for drawer lift out. Bottom: None drawer can rest on cabinet. Packed with screws and installation instructions. Maximum drawer width 18". Light-Duty slide designed for general drawer applications. Mounts with staples or screws. Height: 1". Required Clearance:1/8" each side; 1-1/2" from rear of drawer to cabinet; drawer to be 3/8" shallower than opening. High density polyethylene rollers. Drawers lift out for easy removal. Packaged with screws and installation instructions.
TURNTABLE LAZY SUSAN 6IN 500LB Stanley S822-094 Shelf/Rod Bracket Knape & Vogt 1805HWH500 Euro Self-Close Drawer Slide
SHELF/ROD BRACKETS WHT
Our Price: $5.88
Use for table and countertops or inside cabinets. Designed for mounting shelves and closet rods in closets, storage rooms, etc. Rod mounts on 3 inch drop for easy hanger use. Mount to stud for optimal load capacity. Punched for #12 wood screws. Bulk bagged. Specially designed for use in kitchen cabinet, commercial millwork, home office and RTA furniture applications. Adaptable to face frame or 32mm mounting. Single captive roller limits side play for improved lateral stability. Positive double out-stop. Positive in-stop. Lift-out disconnect. Four way adjustment slots. Positive lock-open position. Cabinet member side mounts. Additional rear mounting socket available for face frame applications. Drawer member fastens to either side or bottom of drawer. Height 1.4". Required Clearance; Side: 1/2" plus 1/32" minus 0 each side. Top:1" required for drawer lift out. Bottom: None drawer can rest on cabinet. Packed with screws and installation instructions. Maximum drawer width 18".
Knape & Vogt 1175P ZC 24 Light Duty Single Track Drawer Slide Knape & Vogt 1805HWH550 Euro Self-Close Drawer Slide Shepherd 9548 Square Lazy Susan Turntable
Light-Duty slide designed for general drawer applications. Mounts with staples or screws. Height: 1". Required Clearance:1/8" each side; 1-1/2" from rear of drawer to cabinet; drawer to be 3/8" shallower than opening. High density polyethylene rollers. Drawers lift out for easy removal. Packaged with screws and installation instructions. Specially designed for use in kitchen cabinet, commercial millwork, home office and RTA furniture applications. Adaptable to face frame or 32mm mounting. Single captive roller limits side play for improved lateral stability. Positive double out-stop. Positive in-stop. Lift-out disconnect. Four way adjustment slots. Positive lock-open position. Cabinet member side mounts. Additional rear mounting socket available for face frame applications. Drawer member fastens to either side or bottom of drawer. Height 1.4". Required Clearance; Side: 1/2" plus 1/32" minus 0 each side. Top:1" required for drawer lift out. Bottom: None drawer can rest on cabinet. Packed with screws and installation instructions. Maximum drawer width 18". Ball-bearing for rotating book racks, business machine stands, serving trays, kitchen storage racks, etc.
Closetmaid 7540 Small End Cap Stanley V8600 Closet Flange Set Stanley V8600 Closet Flange Set
FLANGE SET WHITE
Our Price: $6.96
FLANGE SET ORB FINISH
Our Price: $7.53
Vinyl end cap provides protection from cut end of wire shelving that exposes possible rough edges. Large end caps cover the large rod, 0 gauge, .25"H x .4"W x .4"D. Small end caps are for the 4 gauge wire, .2"H x .2"W x .2"D. Designed to be used with ClosetMaid - Shelf & Rod shelving. Used to support closet rods. Includes one open and one closed socket. Open socket allows you to install the sockets before inserting a closet rod. Fits 1-1/4 in. to 1-5/16 in. diameter pole. Includes mounting screws for easy installation. Used to support closet rods. Includes one open and one closed socket. Open socket allows you to install the sockets before inserting a closet rod. Fits 1-1/4 in. to 1-5/16 in. diameter pole. Includes mounting screws for easy installation.
Knape & Vogt 1284PWH400 Euro Roller Slide Knape & Vogt 1284PWH450 Drawer Slide Stanley V8600 Closet Flange Set
Medium-duty slide designed for kitchen cabinet and bathroom vanity applications. Adaptable to frame mounting and 32mm mounting system. Solid stud and captive roller reduces side play. Positive stop, lift-out disconnect, stay-closed design. Adjustment slots on both the drawer member and the cabinet member ease installation. Screws fasten to either side or bottom of drawer. Positive lock-out feature is ideal for pull out work surfaces. Height: 1-9/32". Required Clearance: 1/2" plus 1/32" minus 0 each side. 1" between overall drawer side height and cabinet opening height required for drawer insertion and removal. Packaged with screws and installation instructions. Maximum drawer width 18". Medium-duty slide designed for kitchen cabinet and bathroom vanity applications. Adaptable to frame mounting and 32mm mounting system. Solid stud and captive roller reduces side play. Positive stop, lift-out disconnect, stay-closed design. Adjustment slots on both the drawer member and the cabinet member ease installation. Screws fasten to either side or bottom of drawer. Positive lock-out feature is ideal for pull out work surfaces. Height: 1-9/32". Required Clearance: 1/2" plus 1/32" minus 0 each side. 1" between overall drawer side height and cabinet opening height required for drawer insertion and removal. Packaged with screws and installation instructions. Maximum drawer width 18". Used to support closet rods. Includes one open and one closed socket. Open socket allows you to install the sockets before inserting a closet rod. Fits 1-1/4 in. to 1-5/16 in. diameter pole. Includes mounting screws for easy installation.
Stanley V8600 Closet Flange Set Knape & Vogt RP-0495-WT Non-Adjustable Shelf and Rod Bracket Knape & Vogt 1260P-16 Light Duty Drawer Slide
Used to support closet rods. Includes one open and one closed socket. Open socket allows you to install the sockets before inserting a closet rod. Fits 1-1/4 in. to 1-5/16 in. diameter pole. Includes mounting screws for easy installation. Holds up to 500 pounds.Slide thru and snap-in pole features. Light-Duty slide designed for general cabinet, desk and fixture application. Height: 3-1/8". Required Clearance: 1/2" plus 1/32" minus 0 each side. Features Positive stop. Stay-closed design. Depress stop lever for drawer removal. Dust shielded ball bearing rollers. Packaged with screws and installation instructions. Maximum drawer width 18".
Knape & Vogt 1284PALM500 Euro Roller Slide Knape & Vogt 1284PWH500 Drawer Slide Knape & Vogt 1260P-18 Light Duty Drawer Slide
Medium-duty slide designed for kitchen cabinet and bathroom vanity applications. Adaptable to frame mounting and 32mm mounting system. Solid stud and captive roller reduces side play. Positive stop, lift-out disconnect, stay-closed design. Adjustment slots on both the drawer member and the cabinet member ease installation. Screws fasten to either side or bottom of drawer. Positive lock-out feature is ideal for pull out work surfaces. Height: 1-9/32". Required Clearance: 1/2" plus 1/32" minus 0 each side. 1" between overall drawer side height and cabinet opening height required for drawer insertion and removal. Packaged with screws and installation instructions. Maximum drawer width 18". Medium-duty slide designed for kitchen cabinet and bathroom vanity applications. Adaptable to frame mounting and 32mm mounting system. Solid stud and captive roller reduces side play. Positive stop, lift-out disconnect, stay-closed design. Adjustment slots on both the drawer member and the cabinet member ease installation. Screws fasten to either side or bottom of drawer. Positive lock-out feature is ideal for pull out work surfaces. Height: 1-9/32". Required Clearance: 1/2" plus 1/32" minus 0 each side. 1" between overall drawer side height and cabinet opening height required for drawer insertion and removal. Packaged with screws and installation instructions. Maximum drawer width 18". Light-Duty slide designed for general cabinet, desk and fixture application. Height: 3-1/8". Required Clearance: 1/2" plus 1/32" minus 0 each side. Features Positive stop. Stay-closed design. Depress stop lever for drawer removal. Dust shielded ball bearing rollers. Packaged with screws and installation instructions. Maximum drawer width 18".
Knape & Vogt 1300P ZC 12 Drawer Slide Knape & Vogt 1284PALM550 Euro Roller Slide Knape & Vogt 1284PWH550 Drawer Slide
Designed for medium duty applications where a lever release is desired. For kitchen cabinet, vanity, desk and store fixture applications. Height: 3".  Required Clearance: 1/2" plus 1/32" minus 0 each side. Features Positive stop lever that prevents accidental drawer removal.  Zinc-plated cold rolled steel. Ball bearing nylon rollers. Packaged with screws and installation instructions. Maximum drawer width 18". Medium-duty slide designed for kitchen cabinet and bathroom vanity applications. Adaptable to frame mounting and 32mm mounting system. Solid stud and captive roller reduces side play. Positive stop, lift-out disconnect, stay-closed design. Adjustment slots on both the drawer member and the cabinet member ease installation. Screws fasten to either side or bottom of drawer. Positive lock-out feature is ideal for pull out work surfaces. Height: 1-9/32". Required Clearance: 1/2" plus 1/32" minus 0 each side. 1" between overall drawer side height and cabinet opening height required for drawer insertion and removal. Packaged with screws and installation instructions. Maximum drawer width 18". Medium-duty slide designed for kitchen cabinet and bathroom vanity applications. Adaptable to frame mounting and 32mm mounting system. Solid stud and captive roller reduces side play. Positive stop, lift-out disconnect, stay-closed design. Adjustment slots on both the drawer member and the cabinet member ease installation. Screws fasten to either side or bottom of drawer. Positive lock-out feature is ideal for pull out work surfaces. Height: 1-9/32". Required Clearance: 1/2" plus 1/32" minus 0 each side. 1" between overall drawer side height and cabinet opening height required for drawer insertion and removal. Packaged with screws and installation instructions. Maximum drawer width 18".
Knape & Vogt 1300P ZC 14 Drawer Slide Prime Line N7050 Closet Pole Bracket Knape & Vogt 1260P-20 Light Duty Drawer Slide
Designed for medium duty applications where a lever release is desired. For kitchen cabinet, vanity, desk and store fixture applications. Height: 3".  Required Clearance: 1/2" plus 1/32" minus 0 each side. Features Positive stop lever that prevents accidental drawer removal.  Zinc-plated cold rolled steel. Ball bearing nylon rollers. Packaged with screws and installation instructions. Maximum drawer width 18". Painted diecast. Includes one pair of pole sockets and screws. Light-Duty slide designed for general cabinet, desk and fixture application. Height: 3-1/8". Required Clearance: 1/2" plus 1/32" minus 0 each side. Features Positive stop. Stay-closed design. Depress stop lever for drawer removal. Dust shielded ball bearing rollers. Packaged with screws and installation instructions. Maximum drawer width 18".
SuperSlide 25633 Corner Corner Round Bar Knape & Vogt 1300P ZC 18 Drawer Slide Knape & Vogt 1300P ZC 16 Drawer Slide
Use with SuperSlide shelving to create uninterrupted sliding action around corners for walk-in closets. Tapered ends slide easily into ClosetMaid, SuperSlide hang rods. Support connection of hang rod with a Hang Bar Support. 0.75?H x 10.25?W x 10.25?DMaterial: Epoxy coated steel. Designed for medium duty applications where a lever release is desired. For kitchen cabinet, vanity, desk and store fixture applications. Height: 3".  Required Clearance: 1/2" plus 1/32" minus 0 each side. Features Positive stop lever that prevents accidental drawer removal.  Zinc-plated cold rolled steel. Ball bearing nylon rollers. Packaged with screws and installation instructions. Maximum drawer width 18". Designed for medium duty applications where a lever release is desired. For kitchen cabinet, vanity, desk and store fixture applications. Height: 3".  Required Clearance: 1/2" plus 1/32" minus 0 each side. Features Positive stop lever that prevents accidental drawer removal.  Zinc-plated cold rolled steel. Ball bearing nylon rollers. Packaged with screws and installation instructions. Maximum drawer width 18".
Knape & Vogt 1260P-22 Light Duty Drawer Slide Knape & Vogt PBP10016 Precision Drawer Slide Knape & Vogt 1300P ZC 20 Drawer Slide
Light-Duty slide designed for general cabinet, desk and fixture application. Height: 3-1/8". Required Clearance: 1/2" plus 1/32" minus 0 each side. Features Positive stop. Stay-closed design. Depress stop lever for drawer removal. Dust shielded ball bearing rollers. Packaged with screws and installation instructions. Maximum drawer width 18". Direct access mounting holes, precision ball bearings, telescopic action, non-handed design, and lever disconnect. Includes screws for installation. Height: 1-1/8". Clearance required: 1/2" plus 1/32" minus 0 each side. Maximum drawer width 24". Designed for medium duty applications where a lever release is desired. For kitchen cabinet, vanity, desk and store fixture applications. Height: 3".  Required Clearance: 1/2" plus 1/32" minus 0 each side. Features Positive stop lever that prevents accidental drawer removal.  Zinc-plated cold rolled steel. Ball bearing nylon rollers. Packaged with screws and installation instructions. Maximum drawer width 18".
Stanley S822-092 Shelf/Rod Bracket Knape & Vogt 1300P ZC 22 Drawer Slide Stanley S822-091 Shelf/Rod Bracket
Designed for mounting shelves and closet rods in closets, storage rooms, etc. Rod mounts on 3 inch drop for easy hanger use. Mount to stud for optimal load capacity. Punched for #12 wood screws. Bulk bagged. Designed for medium duty applications where a lever release is desired. For kitchen cabinet, vanity, desk and store fixture applications. Height: 3".  Required Clearance: 1/2" plus 1/32" minus 0 each side. Features Positive stop lever that prevents accidental drawer removal.  Zinc-plated cold rolled steel. Ball bearing nylon rollers. Packaged with screws and installation instructions. Maximum drawer width 18". Designed for mounting shelves and closet rods in closets, storage rooms, etc. Rod mounts on 3 inch drop for easy hanger use. Mount to stud for optimal load capacity. Punched for #12 wood screws. Bulk bagged.
Stanley S822-093 Shelf/Rod Bracket Knape & Vogt PBP10018 Precision Drawer Slide Knape & Vogt 1300P ZC 24 Drawer Slide
Designed for mounting shelves and closet rods in closets, storage rooms, etc. Rod mounts on 3 inch drop for easy hanger use. Mount to stud for optimal load capacity. Punched for #12 wood screws. Bulk bagged. Direct access mounting holes, precision ball bearings, telescopic action, non-handed design, and lever disconnect. Includes screws for installation. Height: 1-1/8". Clearance required: 1/2" plus 1/32" minus 0 each side. Maximum drawer width 24". Designed for medium duty applications where a lever release is desired. For kitchen cabinet, vanity, desk and store fixture applications. Height: 3".  Required Clearance: 1/2" plus 1/32" minus 0 each side. Features Positive stop lever that prevents accidental drawer removal.  Zinc-plated cold rolled steel. Ball bearing nylon rollers. Packaged with screws and installation instructions. Maximum drawer width 18".
SuperSlide 2058 Closet Rod Knape & Vogt PBP10020 Precision Drawer Slide Knape & Vogt PBP10022 Precision Drawer Slide
Snaps into the Closet Rod Support to allow hangers to slide without interruption. Can be cut to customize length . Holds up to 30lbs per foot. Material: Epoxy coated steel. Direct access mounting holes, precision ball bearings, telescopic action, non-handed design, and lever disconnect. Includes screws for installation. Height: 1-1/8". Clearance required: 1/2" plus 1/32" minus 0 each side. Maximum drawer width 24". Direct access mounting holes, precision ball bearings, telescopic action, non-handed design, and lever disconnect. Includes screws for installation. Height: 1-1/8". Clearance required: 1/2" plus 1/32" minus 0 each side. Maximum drawer width 24".
Shepherd 9549 Round Lazy Susan Turntable TURNTABLE LAZYSUSAN 12IN1000LB Knape & Vogt 89 1-Piece Decorative Straight Shelf Kit
Ball-bearing for rotating book racks, business machine stands, serving trays, kitchen storage racks, etc. Use for table and countertops or inside cabinets. One piece design, polished edge, radiused corners. Kit includes 1/4" tempered glass shelf, shelf anchor, mounting screws and easy-to-follow instructions.
Knape & Vogt KT-0134-812SN Curved Shelf Kit 12 in L x 8 in W Knape & Vogt BC-0037 Closet Pole Socket Knape & Vogt 8400P16 Full Extension Drawer Slide
Features a tempered glass shelf, satin nickel wall clamps and mounting hardware included. For 1-1/4" diameter closet poles. Fits up to 1-3/8" diameter. Mounting screws included. Medium-duty, precision slides for box drawer or pedestal file drawers up to 24" wide. For frame and frameless construction. May be used horizontal position with a reduced load rating of 30 pounds. Height:1-13/16" Clearance required: 1/2" plus 1/32" minus 0 each side. Features telescoping, full extension on precision steel ball bearings. 32mm hole pattern with direct access mounting. Lever disconnect for easy drawer removal. Ball retainer latch and ramps, for easy drawer insertion. Drawer adjustment without removal. Flexible mounting tabs self-adjust to side clearance. Metal ball retainer holds 3 bearings per inch of race for smooth and quiet motion. Polymer stop cushions. Non-handed. Packaged with screws and installation instructions.
Knape & Vogt 8400P12 Full Extension Drawer Slide Knape & Vogt 8400P14 Full Extension Drawer Slide Knape & Vogt 8400P18 Full Extension Drawer Slide
Medium-duty, precision slides for box drawer or pedestal file drawers up to 24" wide. For frame and frameless construction. May be used horizontal position with a reduced load rating of 30 pounds. Height:1-13/16" Clearance required: 1/2" plus 1/32" minus 0 each side. Features telescoping, full extension on precision steel ball bearings. 32mm hole pattern with direct access mounting. Lever disconnect for easy drawer removal. Ball retainer latch and ramps, for easy drawer insertion. Drawer adjustment without removal. Flexible mounting tabs self-adjust to side clearance. Metal ball retainer holds 3 bearings per inch of race for smooth and quiet motion. Polymer stop cushions. Non-handed. Packaged with screws and installation instructions. Medium-duty, precision slides for box drawer or pedestal file drawers up to 24" wide. For frame and frameless construction. May be used horizontal position with a reduced load rating of 30 pounds. Height:1-13/16" Clearance required: 1/2" plus 1/32" minus 0 each side. Features telescoping, full extension on precision steel ball bearings. 32mm hole pattern with direct access mounting. Lever disconnect for easy drawer removal. Ball retainer latch and ramps, for easy drawer insertion. Drawer adjustment without removal. Flexible mounting tabs self-adjust to side clearance. Metal ball retainer holds 3 bearings per inch of race for smooth and quiet motion. Polymer stop cushions. Non-handed. Packaged with screws and installation instructions. Medium-duty, precision slides for box drawer or pedestal file drawers up to 24" wide. For frame and frameless construction. May be used horizontal position with a reduced load rating of 30 pounds. Height:1-13/16" Clearance required: 1/2" plus 1/32" minus 0 each side. Features telescoping, full extension on precision steel ball bearings. 32mm hole pattern with direct access mounting. Lever disconnect for easy drawer removal. Ball retainer latch and ramps, for easy drawer insertion. Drawer adjustment without removal. Flexible mounting tabs self-adjust to side clearance. Metal ball retainer holds 3 bearings per inch of race for smooth and quiet motion. Polymer stop cushions. Non-handed. Packaged with screws and installation instructions.
Knape & Vogt KT-0134-1212SN Decorative Corner Glass Shelf Kit Knape & Vogt KT-0134-624SN Straight Decorative Shelf Kit Knape & Vogt 8400P20 Full Extension Drawer Slide
1/4" Tempered glass for strength and safety. Satin nickel wall clamps and mounting hardware included. Features a tempered glass shelf, satin nickel wall clamps and mounting hardware included. Medium-duty, precision slides for box drawer or pedestal file drawers up to 24" wide. For frame and frameless construction. May be used horizontal position with a reduced load rating of 30 pounds. Height:1-13/16" Clearance required: 1/2" plus 1/32" minus 0 each side. Features telescoping, full extension on precision steel ball bearings. 32mm hole pattern with direct access mounting. Lever disconnect for easy drawer removal. Ball retainer latch and ramps, for easy drawer insertion. Drawer adjustment without removal. Flexible mounting tabs self-adjust to side clearance. Metal ball retainer holds 3 bearings per inch of race for smooth and quiet motion. Polymer stop cushions. Non-handed. Packaged with screws and installation instructions.
Knape & Vogt 8400P22 Full Extension Drawer Slide Knape & Vogt 89 1-Piece Decorative Straight Shelf Kit Knape & Vogt 8450FMP 16 Full Extension Soft Close Drawer Slide
Medium-duty, precision slides for box drawer or pedestal file drawers up to 24" wide. For frame and frameless construction. May be used horizontal position with a reduced load rating of 30 pounds. Height:1-13/16" Clearance required: 1/2" plus 1/32" minus 0 each side. Features telescoping, full extension on precision steel ball bearings. 32mm hole pattern with direct access mounting. Lever disconnect for easy drawer removal. Ball retainer latch and ramps, for easy drawer insertion. Drawer adjustment without removal. Flexible mounting tabs self-adjust to side clearance. Metal ball retainer holds 3 bearings per inch of race for smooth and quiet motion. Polymer stop cushions. Non-handed. Packaged with screws and installation instructions. One piece design, polished edge, radiused corners. Kit includes 1/4" tempered glass shelf, shelf anchor, mounting screws and easy-to-follow instructions. Designed for use on box drawer applications up to 24" wide where the maximum weight load is not to exceed 100 pounds. Product features a "soft-close" module that eliminates drawer slamming. Clearance required: 1/2" plus 1/23" minus 0". Height: 1-13/16".
Knape & Vogt 8450FMP 18 Full Extension Soft Close Drawer Slide Knape & Vogt 8450FMP 20 Full Extension Soft Close Drawer Slide Knape & Vogt 8450FMP 22 Full Extension Soft Close Drawer Slide
Designed for use on box drawer applications up to 24" wide where the maximum weight load is not to exceed 100 pounds. Product features a "soft-close" module that eliminates drawer slamming. Clearance required: 1/2" plus 1/23" minus 0". Height: 1-13/16". Designed for use on box drawer applications up to 24" wide where the maximum weight load is not to exceed 100 pounds. Product features a "soft-close" module that eliminates drawer slamming. Clearance required: 1/2" plus 1/23" minus 0". Height: 1-13/16". Designed for use on box drawer applications up to 24" wide where the maximum weight load is not to exceed 100 pounds. Product features a "soft-close" module that eliminates drawer slamming. Clearance required: 1/2" plus 1/23" minus 0". Height: 1-13/16".
TURNTABLE LAZY SUSAN 4IN 300LB Knape & Vogt 1980 Pre-Finished All Purpose Shelf Board Knape & Vogt 1980 ESP 8X24 Decorative Regular Duty Shelf Board
Use for table and countertops or inside cabinets. Made of 5/8" thick particleboard. Simulated woodgrain finish is produced by an exacting photo-processing technique. Includes precision edge banding. Holds up to 200 Lbs. Made of 5/8" thick particleboard. Simulated woodgrain finish is produced by an exacting photo-processing technique. Includes precision edge banding. Holds up to 200 Lbs.
Prime-Line R 7265 Socket Rear Drawer Track Knape & Vogt BC-0039-3 Closet Pole Socket Knape & Vogt BC-0039-WT Closet Pole Socket
Socket depth allows for front to back adjustment of the rail. Used on side mounted drawer track systems. Raw finish. For 1-1/4" diameter closet poles. Fits up to 1-3/8" diameter. Mounting screws included. For 1-1/4" diameter closet poles. Fits up to 1-3/8" diameter. Mounting screws included.
Knape & Vogt 1980 Pre-Finished All Purpose Shelf Board Closetmaid 1061 Shelf Kit Schlage SP586P Closet Pole Socket
Made of 5/8" thick particleboard. Simulated woodgrain finish is produced by an exacting photo-processing technique. Includes precision edge banding. Holds up to 200 Lbs. Prepack shelving with all hardware needed for installation included. Provides extra storage space for any room. Fits up to 1-3/8" in diameter. Includes one pair of pole sockets. Slim-pak polybagged.
Knape & Vogt 1980 Decorative Regular Duty Prefinished Shelf Board Knape & Vogt 1980 ESP 10X24 Decorative Regular Duty Shelf Board SHELF/ROD SUPPORT STD WHITE
Made of 5/8" thick particleboard. Simulated woodgrain finish is produced by an exacting photo-processing technique. Includes precision edge banding. Holds up to 200 Lbs. Made of 5/8" thick particleboard. Simulated woodgrain finish is produced by an exacting photo-processing technique. Includes precision edge banding. Holds up to 200 Lbs. For use with closet rods up to 1-3/8" diameter. Corrugated steel for extra strength. Sturdy two piece design facilitates installation. Size: 12-3/4" x 9-1/4". UPC labeled.
Schlage SP585F3 Closet Pole Socket Knape & Vogt 1980 Decorative Regular Duty Prefinished Shelf Board Knape & Vogt 1980 Decorative Regular Duty Prefinished Shelf Board
Fits up to 1-3/8" in diameter. Includes one pair of pole sockets. Slim-pak polypagged. Made of 5/8" thick particleboard. Simulated woodgrain finish is produced by an exacting photo-processing technique. Includes precision edge banding. Holds up to 200 Lbs. Made of 5/8" thick particleboard. Simulated woodgrain finish is produced by an exacting photo-processing technique. Includes precision edge banding. Holds up to 200 Lbs.
Knape & Vogt 1980 ESP 12X24 Decorative Regular Duty Shelf Board Knape & Vogt 1980 ESP 8X36 Decorative Regular Duty Shelf Board Knape & Vogt 1980WH Regular Duty Prefinished Shelf Board
Made of 5/8" thick particleboard. Simulated woodgrain finish is produced by an exacting photo-processing technique. Includes precision edge banding. Holds up to 200 Lbs. Made of 5/8" thick particleboard. Simulated woodgrain finish is produced by an exacting photo-processing technique. Includes precision edge banding. Holds up to 200 Lbs. Made of 5/8" thick particleboard. Simulated woodgrain finish is produced by an exacting photo-processing technique. Includes precision edge banding. Holds up to 200 Lbs.
SHELF/ROD STD WHT 12-5/8X9-3/4 Closetmaid 1640 Closet Organizer MAILBOX-TO-GO ALL IN ONE MAILB
For use with closet rods up to 1-3/8" in diameter. Size: 12-5/8" x 9-3/4". Convenient one-piece construction. UPC labeled. Up to 5 feet closet organizer kit with all hardware included. Sturdy steel construction. Size: 5' hanging space and 7' shelf space. Made of a high quality galvanized steel mailbox and a dual reinforced steel post with a decorative scroll. Assembles in minutes, comes complete with a mailbox, post, and mounting hardware. Decorative embossed eagle on the door. USPS approved.
Knape & Vogt PB-0023-UPC Center Rod Support SuperSlide 4714 Wire Shelf Knape & Vogt 1980 Decorative Regular Duty Prefinished Shelf Board
Mounting hardware included. Carded. Durable vinyl coated steel rods. All purpose storage shelf. 1" deep. Made of 5/8" thick particleboard. Simulated woodgrain finish is produced by an exacting photo-processing technique. Includes precision edge banding. Holds up to 200 Lbs.
Knape & Vogt1980 WH Regular Duty Prefinished Shelf Board Knape & Vogt 1980 Pre-Finished All Purpose Shelf Board Knape & Vogt 1980 ESP 10X36 Decorative Regular Duty Shelf Board
Made of 5/8" thick particleboard. Simulated woodgrain finish is produced by an exacting photo-processing technique. Includes precision edge banding. Holds up to 200 Lbs. Made of 5/8" thick particleboard. Simulated woodgrain finish is produced by an exacting photo-processing technique. Includes precision edge banding. Holds up to 200 Lbs. Made of 5/8" thick particleboard. Simulated woodgrain finish is produced by an exacting photo-processing technique. Includes precision edge banding. Holds up to 200 Lbs.
Knape & Vogt 1980 ESP 8X48 Decorative Regular Duty Shelf Board Knape & Vogt 1980 Pre-Finished All Purpose Shelf Board Closetmaid 1021 Linen Shelf Kit
Made of 5/8" thick particleboard. Simulated woodgrain finish is produced by an exacting photo-processing technique. Includes precision edge banding. Holds up to 200 Lbs. Made of 5/8" thick particleboard. Simulated woodgrain finish is produced by an exacting photo-processing technique. Includes precision edge banding. Holds up to 200 Lbs. Prepack shelving with all hardware needed for installation included. Provides extra storage space for any room.
Closetmaid 1628 Closet Organizer Kit Knape & Vogt 1980 Decorative Regular Duty Prefinished Shelf Board Knape & Vogt 1980 Wall Mounted All Purpose Shelf Board
5' to 8' closet organizer kit with all hardware included. Sturdy steel construction. 10-1/2' hanging space and 11' of shelf space. Made of 5/8" thick particleboard. Simulated woodgrain finish is produced by an exacting photo-processing technique. Includes precision edge banding. Holds up to 200 Lbs. Made of 5/8" thick particleboard. Simulated woodgrain finish is produced by an exacting photo-processing technique. Includes precision edge banding. Holds up to 200 Lbs.
Knape & Vogt 1980 WAL Regular Duty Prefinished Shelf Board Knape & Vogt 1980 ESP 12X36 Decorative Regular Duty Shelf Board Knape & Vogt 1980 Decorative Regular Duty Prefinished Shelf Board
Made of 5/8" thick particleboard. Simulated woodgrain finish is produced by an exacting photo-processing technique. Includes precision edge banding. Holds up to 200 Lbs. Made of 5/8" thick particleboard. Simulated woodgrain finish is produced by an exacting photo-processing technique. Includes precision edge banding. Holds up to 200 Lbs. Made of 5/8" thick particleboard. Simulated woodgrain finish is produced by an exacting photo-processing technique. Includes precision edge banding. Holds up to 200 Lbs.
SuperSlide 4717 Wire Shelf Knape & Vogt 1980 WAL Regular Duty Prefinished Shelf Board Rubbermaid Classic CL10000M Double Wall Mailbox Post
Durable vinyl coated steel rods. All purpose storage shelf. 1" deep. Made of 5/8" thick particleboard. Simulated woodgrain finish is produced by an exacting photo-processing technique. Includes precision edge banding. Holds up to 200 Lbs. Double-wall, rustproof plastic construction. Rear safety retrieval door keeps children and adults away from traffic. Medium capacity holds magazines, letters and small boxes. Ultraviolet paint inhibitor extends appearance. Size: 49.9"H x 10.2"W x 22.1"D.
Knape & Vogt 1980 Decorative Regular Duty Prefinished Shelf Board Knape & Vogt 1980 ESP 10X48 Decorative Regular Duty Shelf Board Mailmaster Trimline 53180 Standard Mailbox
Made of 5/8" thick particleboard. Simulated woodgrain finish is produced by an exacting photo-processing technique. Includes precision edge banding. Holds up to 200 Lbs. Made of 5/8" thick particleboard. Simulated woodgrain finish is produced by an exacting photo-processing technique. Includes precision edge banding. Holds up to 200 Lbs. Front and rear access to interior compartments. Spacious interior to hold letters, magazines and catalogs with room to spare. Heavy duty poly construction. Mounts easily to 4"x"4 (10.2 x 10.2 cm) post. (Mailbox post sold separately). Note: With normal soil conditions and level ground, a standard 4?x4? post cut to 48 inch length is adequate for mounting your MailMaster mailbox with 24? in ground and 24? above ground. Includes: Address numbers, mounting hardware and rear post cover. DIMENSIONS: 51?H x 12-1/2?W x 23-1/4?D.
Mailmaster Trimline Plus 53300 Mailbox Mailmaster Trimline 53380 Standard Mailbox Solar Gentry GC1M0000 Double Wall Mailbox Post
Front and rear access to interior compartments. Spacious interior to hold letters, magazines and catalogs with room to spare. Heavy duty poly construction. Mounts easily to 4"x"4 (10.2 x 10.2 cm) post. (Mailbox post sold separately). Note: With normal soil conditions and level ground, a standard 4?x4? post cut to 48 inch length is adequate for mounting your MailMaster mailbox with 24? in ground and 24? above ground. Includes: Address numbers, mounting hardware and rear post cover. DIMENSIONS: 51?H x 12-1/2?W x 23-1/4?D. Front and rear access to interior compartments. Spacious interior to hold letters, magazines and catalogs with room to spare. Heavy duty poly construction. Mounts easily to 4"x"4 (10.2 x 10.2 cm) post. (Mailbox post sold separately). Note: With normal soil conditions and level ground, a standard 4?x4? post cut to 48 inch length is adequate for mounting your MailMaster mailbox with 24? in ground and 24? above ground. Includes: Address numbers, mounting hardware and rear post cover. DIMENSIONS: 51?H x 12-1/2?W x 23-1/4?D. Double-wall, rustproof plastic construction. Rear safety retrieval door keeps children and adults away from traffic. Features a built-in compartment for newspapers or parcels. Large capacity holds magazines, letters and small boxes. Ultraviolet paint inhibitor extends appearance. Size: 49.6"H x 11.9"W x 22.4"D.
Knape & Vogt 1980 Pre-Finished All Purpose Shelf Board MAILBOX /POST C1 PLASTIC BLACK Solar Gentry GC1B000 Double Wall Mailbox Post
Made of 5/8" thick particleboard. Simulated woodgrain finish is produced by an exacting photo-processing technique. Includes precision edge banding. Holds up to 200 Lbs. Double-wall, rustproof plastic construction. Rear safety retrieval door keeps children and adults away from traffic. Medium capacity holds magazines, letters and small boxes. Ultraviolet paint inhibitor extends appearance. Size: 49.9"H x 10.2"W x 22.1"D. Double-wall, rustproof plastic construction. Rear safety retrieval door keeps children and adults away from traffic. Features a built-in compartment for newspapers or parcels. Large capacity holds magazines, letters and small boxes. Ultraviolet paint inhibitor extends appearance. Size: 49.6"H x 11.9"W x 22.4"D.
Closetmaid 1031 Shelf Kit Waddell 410DP Closet Pole Socket Closetmaid 1041 Shelf Kit
Prepack shelving with all hardware needed for installation included. Provides extra storage space for any room. Fits up to 1-3/8" in diameter closet pole or 1" diameter pipe. Hardwood construction for maximum strength, extra deep holes for dropout prevention. Screws for each part included to make mounting quick, easy, and strong. Includes one pair of pole sockets. Prepack shelving with all hardware needed for installation included. Provides extra storage space for any room.
Knape & Vogt 1980 WH Regular Duty Prefinished Shelf Board Knape & Vogt 1980 Pre-Finished All Purpose Shelf Board Knape & Vogt 1980 WAL Regular Duty Prefinished Shelf Board
Made of 5/8" thick particleboard. Simulated woodgrain finish is produced by an exacting photo-processing technique. Includes precision edge banding. Holds up to 200 Lbs. Made of 5/8" thick particleboard. Simulated woodgrain finish is produced by an exacting photo-processing technique. Includes precision edge banding. Holds up to 200 Lbs. Made of 5/8" thick particleboard. Simulated woodgrain finish is produced by an exacting photo-processing technique. Includes precision edge banding. Holds up to 200 Lbs.
Knape & Vogt 1980 Wall Mounted All Purpose Shelf Board Knape & Vogt 1980 ESP 12X48 Decorative Regular Duty Shelf Board Knape & Vogt 1980 Decorative Regular Duty Prefinished Shelf Board
Made of 5/8" thick particleboard. Simulated woodgrain finish is produced by an exacting photo-processing technique. Includes precision edge banding. Holds up to 200 Lbs. Made of 5/8" thick particleboard. Simulated woodgrain finish is produced by an exacting photo-processing technique. Includes precision edge banding. Holds up to 200 Lbs. Made of 5/8" thick particleboard. Simulated woodgrain finish is produced by an exacting photo-processing technique. Includes precision edge banding. Holds up to 200 Lbs.
Closetmaid 1361 Wardrobe Shelf Knape & Vogt 1980 Pre-Finished All Purpose Shelf Board Closetmaid 1608 Deluxe Closet Organizer Kit
Sturdy ventilated vinyl coated steel wire construction. Economical Shelf & Rod shelving provides shelf and hanging space for bedroom, laundry or where extra space is needed. No need to purchase a hang rod, it is constructed into the shelving unit. Support brackets and wall anchors sold separately. Made of 5/8" thick particleboard. Simulated woodgrain finish is produced by an exacting photo-processing technique. Includes precision edge banding. Holds up to 200 Lbs. 5' to 8' closet organizer kit with all hardware included. Sturdy steel construction. 10-1/2' hanging space and 13-1/2' shelf space.
SuperSlide 5636 Closet Organizer Kit SuperSlide 2057 Closet Rod SuperSlide 4735 Linen Organizer Wire Shelf
Utilizes "SuperSlide" shelving to provide a continuous hanger slide. For 5' to 8' closets. All hardware included. Sturdy steel construction. Size: 9' hanging space and 12' shelf space. Snaps into the Closet Rod Support to allow hangers to slide without interruption. Can be cut to customize length . Holds up to 30lbs per foot. Material: Epoxy coated steel. Ventilated design keeps clothing and linens fresh. Add SuperSlide hardware components to convert to a hanging shelf where hangers slide continuously. Use SuperSlide shelf by itself for storage. Install shelf inverted with lip up to create shoe shelf. Sturdy vinyl coated steel wire construction.
Closetmaid 6222 Hang Basket Waddell 408DP Economy Closet Pole Socket Closetmaid 21066 Shelf and Rod Corner Kit
17 in. wide hanging basket instantly creates additional storage. Hang multiple baskets. This sturdy wire bin does not need additional hardware; hooks directly to shelf. Perfect to use under the 24 in. or wider wire shelves. Fits any wire shelving. Material: Epoxy coated steel. Fits up to 1-3/8" in diameter closet pole or 1" diameter pipe. Hardwood construction for maximum strength, extra deep holes for dropout prevention. Screws for each part included to make mounting quick, easy, and strong. Made from linden wood. Includes one pair of pole sockets. By installing in corner with shelves connecting, this shelf creates a usable corner so that hangers continue around corner. Installation hardware for corner shelf included. Shelving sold separately. Steel coated with vinyl.
Closetmaid 1363 Wardrobe Shelf SuperSlide 4719 Wire Shelf Closetmaid 8279 Laundry Shelf
Sturdy ventilated vinyl coated steel wire construction. Economical Shelf & Rod shelving provides shelf and hanging space for bedroom, laundry or where extra space is needed. No need to purchase a hang rod, it is constructed into the shelving unit. Support brackets and wall anchors sold separately. Ventilated design keeps clothing and linens fresh. Add SuperSlide hardware components to convert to a hanging shelf where hangers slide continuously. Use SuperSlide shelf by itself for storage. Install shelf inverted with lip up to create shoe shelf. Sturdy vinyl coated steel wire construction. Ventilated wire shelf with space for hangers. Wire spacing provides storage for small items or books. Installation hardware included. Material: Epoxy coated steel.
Closetmaid 1078 Shelf and Rod Wire Shelf Closetmaid 37300 Wardrobe Shelf Closetmaid 1395 Close Mesh Wire Shelf
Sturdy ventilated vinyl coated steel wire construction. Economical Shelf & Rod shelving provides shelf and hanging space for bedroom, laundry or where extra space is needed. No need to purchase a hang rod, it is constructed into the shelving unit. Support brackets and wall anchors sold separately. Sturdy ventilated vinyl coated steel wire construction. Economical Shelf & Rod shelving provides shelf and hanging space for bedroom, laundry or where extra space is needed. No need to purchase a hang rod, it is constructed into the shelving unit. Support brackets and wall anchors sold separately. Sturdy vinyl coated steel wire construction.Wires are spaced 5/8 in. apart versus the 1 in. on our other wire shelving. Keeps small items in the pantry from tipping over. Install with the ShelfTrack system and create a fully adjustable pantry. Installation hardware sold separately. Can be cut to custom lengths.
Closetmaid 21067 Corner Shelf Kit Closetmaid 77545 Shelf End Cap Closetmaid 1396 Close Mesh Wire Shelf
By installing in corner with shelves connecting, this shelf creates a usable corner so that hangers continue around corner. Installation hardware for corner shelf included. Shelving sold separately. Steel coated with vinyl. These end caps cover both ends of 0 gauge wire of ClosetMaid - Shelf & Rod ventilated shelving. End caps keep hangers from sliding off exposed ends. 0.5"H x 2"W x 0.5"D Sturdy vinyl coated steel wire construction.Wires are spaced 5/8 in. apart versus the 1 in. on our other wire shelving. Keeps small items in the pantry from tipping over. Install with the ShelfTrack system and create a fully adjustable pantry. Installation hardware sold separately. Can be cut to custom lengths.
SuperSlide 4737 Linen Wire Shelf Closetmaid 3732521 Linen Shelf Solar PED0000B Locking Pedestal Mailbox Post
Durable vinyl coated steel rods. All purpose storage shelf. 1" deep. Ventilated design keeps clothing and linens fresh. Add SuperSlide hardware components to convert to a hanging shelf where hangers slide continuously. Use SuperSlide shelf by itself for storage. Install shelf inverted with lip up to create shoe shelf. Sturdy vinyl coated steel wire construction. Constructed from heavy duty cast aluminum, weather-durable, powder coated finish will not rust.  Serves as a full service locking mailbox and large capacity holds several days of mail. Assembly hardware is included for easy concreting. USPS approved. Dimensions: 50-1/4"H x 18"W x 12-1/2"D.
Closetmaid 37305 Wardrobe Shelf Closetmaid 37318 Close Mesh Wire Shelf Closetmaid 37402 Close Mesh Wire Shelf
Sturdy ventilated vinyl coated steel wire construction. Economical Shelf & Rod shelving provides shelf and hanging space for bedroom, laundry or where extra space is needed. No need to purchase a hang rod, it is constructed into the shelving unit. Support brackets and wall anchors sold separately. Sturdy vinyl coated steel wire construction.Wires are spaced 5/8 in. apart versus the 1 in. on our other wire shelving. Keeps small items in the pantry from tipping over. Install with the ShelfTrack system and create a fully adjustable pantry. Installation hardware sold separately. Can be cut to custom lengths. Sturdy vinyl coated steel wire construction.Wires are spaced 5/8 in. apart versus the 1 in. on our other wire shelving. Keeps small items in the pantry from tipping over. Install with the ShelfTrack system and create a fully adjustable pantry. Installation hardware sold separately. Can be cut to custom lengths.
Closetmaid 35913 Total Slide Shelf Closetmaid 37403 Close Mesh Wire Shelf SuperSlide 35917 Total Slide Shelf
Continuous slide all-in-one shelf and rod solution. Sturdy vinyl coated steel wire construction.Wires are spaced 5/8 in. apart versus the 1 in. on our other wire shelving. Keeps small items in the pantry from tipping over. Install with the ShelfTrack system and create a fully adjustable pantry. Installation hardware sold separately. Can be cut to custom lengths. Continuous slide all-in-one shelf and rod solution.
   
 
1