Home > HARDWARE > GENERAL HARDWARE > SHELVING & CLOSET > VENTILATED SHELVING ACCESSORI
Sort By:
1
SUPPORT WHITE                 National Hardware N116-475 Shelf Support SUPPORT BRASS
SUPPORTS BRONZE
Our Price: $0.38
Used to support shelves. 1/4" diameter shank. Safe working load 25 lbs. Boxed loose. National Hardware Shelf Support, Series: 158, 0.62 in Width, 0.05 in Thickness, Steel, Bronze, 25 lb Load Capacity, Suitable For Use With: National 157 Shelf Standards, 0.14 in Hole Diameter, For Supporting Shelves Used to support shelves. Can be used with National 157 shelf standards. Safe working load 25 lbs. Boxed loose.
National Hardware N224-675 Shelf Support Amerock Allison BP811WD Round Cabinet Knob Amerock Allison BP813WD Round Cabinet Knob
SUPPORTS BRASS
Our Price: $0.44
National Hardware Shelf Support, Series: 159, 1/4 in Shank Diameter, 1.22 in Length, 1/2 in Width, 0.05 in Thickness, Steel, Brass, 25 lb Load Capacity, 0.16 in Hole Diameter, For Supporting Shelves Unfinished wood knob. Use with one #8-32 x 1" type screw. Unfinished wood knob. Use with one #8-32 x 1" type screw.
Amerock Allison 232WHT Round Cabinet Knob SuperSlide 948 Pre-Loaded Wall Bracket Amerock Allison 69228 Round Plain Cabinet Knob
Height 1, use with one #8-32 x 1" type screw. Secures shelf to side wall of closet. Pre-loaded with pins and anchors, no screws needed. Accommodates pole clips and shelf stops in "TotalSlide" system. Ceramic knob with 1-1/4" diameter x 1" height. Use with one #8-32 x 1" type screw.
KNOB 1IN 25MM UNFINISHED      Prime Line R 7133 Drawer Track Backplate Closetmaid 01016 End Cap
Use with one #8-32 x 1" type screw. Can be inverted for self-adjusting application, used on rolled edge and other center mounted tracks. Vinyl end cap provides protection from cut end of wire shelving that exposes possible rough edges. Large end caps cover the large rod, 0 gauge, .25"H x .4"W x .4"D. Small end caps are for the 4 gauge wire, .2"H x .2"W x .2"D. Designed to be used with ClosetMaid - Shelf & Rod shelving.
SuperSlide 5629 Closet Rod Support Prime Line R 7085 Drawer Track Guide Kit Prime Line R 7152 Drawer Track Guide Kit
SuperSlide shelving and hardware allows hangers to slide freely on both Fixed Mount and ShelfTrack mounting systems. Hangers slide without interruption. Snaps onto SuperSlide shelf to support hang rod. Use one every 36 in. of hang rod and at each end of shelf and hang rod. 5.75"H x 0.87"W x 3.87"D. Material: Resin Polyethylene guide and white polyethylene side saddles, restores smooth operation to track mounted drawers. Fits a 9/32" x 1-1/8" track. Polyethylene guide and white polyethylene side saddles, restores smooth operation to track mounted drawers. Fits a 9/32" x 1-1/8" track.
Prime Line R 7154 Drawer Track Guide Kit Prime Line R 7145 Drawer Track Backplate Amerock Allison BP814WD Round Cabinet Knob
Yellow polyethylene guide and white polyethylene side saddles, restores smooth operation to track mounted drawers. Fits a 3/32" x 1-9/32" track. Contents: 2 guides, 4 side saddles, and 2 sets of installation fasteners. Used to hold track to back of cabinet; fits most popular side mount rails. Contents: 2 backplates; 2 sets of installation screws. Unfinished wood knob. Use with one #8-32 x 1" type screw.
Amerock Allison 217WHT Round Plain Cabinet Knob Prime Line R 7084 Drawer Track Guide Kit Prime Line R 7082 Drawer Track Guide Kit
Height 1, use with one #8-32 x 1" type screw. Brown polyethylene guide and white polyethylene side saddles, restores smooth operation to track mounted drawers. Fits a 1/4" x 7/8" track. Contents: 2 guides, 4 side saddles, and 2 sets of installation fasteners. Red polyethylene guide and white polyethylene side saddles, restores smooth operation to track mounted drawers. Fits a 9/32" x 3/4" track. Contents: 2 guides, 4 side saddles, and 2 sets of installation fasteners.
Prime Line R 7130 Drawer Track Guide Kit Prime Line R 7131 Drawer Track Back Socket Amerock Allison 221WHT Round Cabinet Knob
Purple polyethylene guide and white side saddles. Guides used for aligning drawer and making for a smoother operation. Fits a 3/32" x 1-3/16" track. Contents: 2 guides, 4 side saddles, and 2 sets of installation fasteners. Designed for use with metal rolled-edge tracks. Mounts horizontally or vertically. Used on Amerock Tri-roller drawer slide track. (Track fits snug). Ceramic knob with 1-1/2" diameter x 1-1/16" height. Use with one #8-32 x 1" type screw. Pink Rose Insert.
InterDesign 16101 Over-The-Door Hook Prime Line U 9335 Spoon Shelf Support Peg SCREW MOUNTING CHM FIN
White plastic, packaged on pegable card. For use with cabinets and storage cabinets with glass shelves. Allows installation of 2 shelf and rod brackets to the wall and 1 shelf to the brackets. Four 1-1/2" pan head screws for mounting brackets to the wall. Four 3/4" pan head screws for mounting shelf to the brackets. For best use install in wall studs. For use with 108 shelf & rod bracket.
SCREW MOUNTING ORB FIN        SCREW MOUNTING WHITE          Closetmaid 1164XBJ Support Bracket
MOUNTING SCREWS WHT
Our Price: $2.50
Allows installation of 2 shelf and rod brackets to the wall and 1 shelf to the brackets. Four 1-1/2" pan head screws for mounting brackets to the wall. Four 3/4" pan head screws for mounting shelf to the brackets. For best use install in wall studs. For use with 108 shelf & rod bracket. Allows installation of 2 shelf and rod brackets to the wall and 1 shelf to the brackets. Four 1-1/2" pan head screws for mounting brackets to the wall. Four 3/4" pan head screws for mounting shelf to the brackets. For best use install in wall studs. For use with 108 shelf & rod bracket. Closetmaid Support Bracket, 12 in Length, 2 in Width, 2 in Depth, Steel, Epoxy Coated, White, Suitable For Use With: Wire Shelving, Includes: (2) Brackets, (2) Anchors, (2) NO 8 Pins
Knape & Vogt 1284-4WP Rear Mouth Socket Rear Mounting Bracket Amerock Allison 69128 Round Cabinet Knob SuperSlide 6609 Pre-Loaded Wall Bracket
Optional bracket for use with draw slide No.1284. Porcelain knob with 1-1/2" diameter x 15/16" height. Use with one #8-32 x 1" type screw. Heavy duty preloaded wall bracket with anchor, mounts to the side wall and holds the end of the SuperSlide shelf and Hang Rod. Supports front lip of shelving and hang rod where they meet the side wall. With pre-loaded pins. For drywall installations. 4.125"H x 1.75"W x 2"D. Material: Resin.
SUPPORT ROD CLOSET ZINC PLATED Closetmaid 6610 Wall Clip Prime Line U 9337 Spoon Shelf Support Peg
Used to support adjustable closet rods. Includes fasteners. Safe working load: 40 lbs. Visual-pack. Anchors shelf to wall. Ensures stability of shelf. For use with cabinets and storage cabinets with glass shelves.
BRACKET SUPPORT SHOE SHELF WHT Knape & Vogt RP-0044-BWT Non-Adjustable Shelf and Rod Bracket Prime Line U 9116 Spoon Shelf Support Peg
For wire shelving, converts almost any wire shelf to a shoe shelf. Make a shoe shelf by inverting shelf, lip facing up. Holds shoes away from wall at an angle. Use 1 shoe support bracket every 24 in. Does not work with Close Mesh shelving. 6.125"H x 1.25"W x 4.75"D. For 11" - 18" deep shelves and rods up to 1-3/8" diameter. Slide-thru feature. For use with cabinets and storage cabinets with glass shelves.
Prime Line U 9150 Spoon Shelf Support Peg Prime Line U 9360 Shelf Support Peg SUPPORT WHITE
For use with cabinets and storage cabinets with glass shelves. Mini-style frequently used in stereo and display cabinets. 1/2"D support, 5mm OD x 3/8"L peg. 12 lbs. per peg maximum safe-weight load. Used to support shelves. 1/4" diameter shank. Safe working load 25 lbs. Boxed loose.
Prime Line R 7147 Flat Stepped Drawer Guide Roller Assembly Closetmaid 1002 Joiner Plate SuperSlide 5655 Closet Rod Support
Rollers mount at the front of the drawer opening, and help center the drawer. This allows for smoother operation. Flat stepped roller edge type, mixed materials. Includes 1 left hand roller, 1 right hand roller, and 1 set of installation fasteners. Use to join 2 shelves together to create a continuous run of shelving. Supports the joining of 2 wire shelves. One set consists of 2 joiner plates, 1 bolt and 1 nut. NOT for use with Close Mesh shelving. 1.19?H x 2.25?W x 1.13?D. Material: Resin. Converts shelf & rod shelving to a continous slide. Hang rod snaps into bracket to create an continuous slide for hangers. Snaps onto SuperSlide shelf to support hang rod. Use one every 36 in. (91,44cm) of hang rod and at each end of shelf and hang rod. 5.75"H x 0.87"W x 3.87"D. Material: Resin.
Knape & Vogt 256PZC Adjustable Pilaster Shelf Support Prime Line R 7148 Convex Drawer Track Roller Prime Line U 9147 Shelf Support Peg
Snaps securely into place. For use with No. 233 and No. 255. High strength steel. Steel bracket, convex plastic roller mounts on rear of drawer. Used as center roller for monorail drawer slide systems. Contains: 2 roller assemblies, 2 sets of installation screws. 1/4" diameter peg and support a maximum safe load of 5 lb. Used to support cabinet shelves.
Knape & Vogt 335P PLAS Shelf Support Pin SUPPORT ROD CLOSET WHITE      BRACKET RR MT F/MDL 84-8450 ZN
CLOSET ROD SUPPORTS WHT
Our Price: $3.55
1/4" diameter x 7/16"L pin. Polybagged. Used to support adjustable closet rods. Includes fasteners. Safe working load: 40 lbs. Visual-pack. Optional rear mounting socket for face frame application simplifies installation. Non handed. Hardware included.  3-1/2" L x 0.50"W. Zinc finish.
SUPPORT ZINC PLATED           SUPPORT BRONZE                Prime Line R 7141 Drawer Track Roller
Used to support shelves. 1/4" diameter shank. Safe working load 25 lbs. Visual-pack. Used to support shelves. Can be used with National 157 shelf standards. Safe working load: 70 lbs. Visual-pack. Steel bracket, convex plastic roller mounts on rear of drawer. Used as center roller for monorail drawer slide systems. Contains: 2 roller assemblies, 2 sets of installation screws.
Prime Line U 9302 Shelf Support Peg SuperSlide 75651 Closet Rod Connector Closetmaid 6620 Wall Bracket
3mm diameter peg and support a maximum safe load of 10 lb. Used to support cabinet shelves. Use with SuperSlide shelving to create uninterrupted sliding action around corners for walk-in closets. Keeps hangers from sliding off exposed ends. Support the connection of the two pieces of hang rod with a hang bar support. 2"H x 0.5"W x 0.5"D. Material: Plastic. Heavy duty preloaded bracket with anchor easily mounts to the wall and holds the end of any size ClosetMaid shelf. Provides side wall support. Supports front lip of shelving where it meets the side wall. For drywall installations. Includes: 2.875"H x 2.125"W x 1.75"D. Material: Resin.
National Hardware 208BC Shelf and Rod Bracket Prime Line R 7132 Drawer Track Back Roller with Plastic Roller Closetmaid 1180 Support Bracket
SHELF/ROD BRACKETS WHT
Our Price: $3.84
National Hardware Shelf and Rod Bracket, Series: 208BC, 12.74 in Length, 9.31 in Width, 0.84 in Depth, 0.22 in Thickness, Steel, White, 125 lb Load Capacity, For used to hold up to 1-3/8 in diameter closet rod Steel bracket, convex plastic roller mounts on rear of drawer. Used as center roller for monorail drawer slide systems. Contents: 2 roller assemblies, 2 sets of installation screws. Closetmaid Support Bracket, 12 in Length, 2 in Width, 2 in Depth, Steel, Epoxy Coated, White, Suitable For Use With: Wire Shelving, Includes: (1) Support Bracket, (1) Anchor, (1) NO 8 Pin
SuperSlide 6641 Wall Bracket BRACKET RR MT F/MDL TT100 ZINC Knape & Vogt RP-0043-WT Adjustable Shelf and Rod Bracket
Supports low profile SuperSlide shelving in a wall to wall installation. Includes: 2 wall brackets, 4 pins and 4 anchors. Use in conjunction with support brackets and wall clips for installing wire shelving. Suports front lip of shelving where it meets the side wall. 2"H x 2.19W x 1.75"D. Material: Resin Optional rear mounting socket for face frame application simplifies installation. Non handed. Hardware included.  3-1/2" L x 0.50"W. Zinc finish. For 11" - 14" deep shelves and rods up to 1-3/8" diameter. Slide thru and snap-in pole features.
Knape & Vogt 256 Adjustable Dimple Pilaster Support National Hardware 108BC Shelf and Rod Bracket SHELF SUPPORT 1/4IN ZINC PLTD
SHELF BRACKETS WHT
Our Price: $4.17
Snaps securely into place. For use with No. 233 and No. 255. High strength steel. National Hardware Shelf and Rod Bracket, Series: 108BC, 12.45 in Length, 10.87 in Width, 1 in Depth, 0.1 in Thickness, Steel, White, 125 lb Load Capacity, For Mounting Shelves and Closet Rods in Closets and Storage Rooms
Amerock Ceramics BP72530 Round Cabinet Knob Closetmaid 1001 Corner Support Bracket BRACKET REAR MNT F/MDL 1805 ZN
Use with one #8-32 x 1" type screw. Supports front lip of shelving to keep it level where it meets another shelf in a corner. Snap in place design. For corner installations.  0.375?H x 5?W x 0.75?D. Material: steel, coated with epoxy. Pair of rear brackets (left and right) for the 1805 epoxy-coated drawer slide features a 2-3/8" socket.
Prime Line R 7240 Right Hand/Left Hand Drawer Track Back Plate Knape & Vogt 345 Shelf Support Knape & Vogt 345 Shelf Support
White nylon; 2-3/4"socket depth allows 2"of front to back adjustment of the rail; used on side mounted drawer track systems. Raw finish. Contents: 1 left hand bracket; 1 right hand bracket; 2 sets of installation screws. NOTE: Right side has a larger lip. For 5 mm drilled holes. Use with No.129 rubber cushion. 4.7 mm diameter x 5/16" L pin. Poly pack. For 5 mm drilled holes. Use with No.129 rubber cushion. 4.7 mm diameter x 5/16" L pin. Poly pack.
Knape & Vogt 346 Shelf Support Knape & Vogt 346P BR Shelf Support Knape & Vogt RP-0045-WT Non-Adjustable Shelf and Rod Bracket
Use with No. 129 rubber cushion. For 1/4" diameter holes x 3/8"L pin. Use with No. 129 rubber cushion. For 1/4" diameter holes x 3/8"L pin. For 11" - 18" deep shelves and rods up to 1-3/8" diameter. Slide-thru feature.
Interdesign 6530 Accessory Hook HANGER CLOSET ACCESSORY LOOP  Decko 38500 Adjustable Over-The Door Hanger
Plated steel wire, ideal for hanging multiple items. Packaged with hang tab. InterDesign Over The Rod Accessory Hook, Series: Classico, Rod Mounting, Steel, Bronze, For Hanging Storage Chrome plated for durability. Scratch and rust resistant. Has snap-out spacer to adjust from 1-3/8" to 1-7/8". Easy to install. Hardware included. 14" length.
SuperSlide 75638 Closet Rod End Cap Prime-Line R 7321 Drawer Track Guide and Glide Prime Line R 7125 Undermount Drawer Track Kit
For use with ClosetMaid, SuperSlide wire shelving. Prevents hangers from sliding off end of closet hang rod. Insert into end of the hang rod.Two end caps per package. 0.5"H x 0.5"W x 0.5"D. Material: Resin. Used on furniture drawer systems; for dressers, hutches and night stand drawers. Opening for metal track on larger piece measures 15/16" x 3/32". Kit includes 2 dark-brown, plastic track case guides and 2 track guides, 4 white, plastic corner glides, 8 ring shank nails for nailing in corner glides (3/4" x 14-1/2 ga.), and 8 Phillips drive, pan head screws for installation of guides (#6 x 5/8"). Rolled edge galvanized steel track with polyethylene guides and nylon front rollers. Track may be cut down for shorter drawer and can be used for top or bottom mount installations. Contents: 1 track; 1 front plate; 1 back plate; 1 drawer guide; 2 front rollers; 1 set of installation fasteners.
Knape & Vogt 1805HWH400 Euro Self-Close Drawer Slide Closetmaid 7561 U-Shape Shelf Clip Stanley 234971 Adjustable Shelf and Rod Bracket
Specially designed for use in kitchen cabinet, commercial millwork, home office and RTA furniture applications. Adaptable to face frame or 32mm mounting. Single captive roller limits side play for improved lateral stability. Positive double out-stop. Positive in-stop. Lift-out disconnect. Four way adjustment slots. Positive lock-open position. Cabinet member side mounts. Additional rear mounting socket available for face frame applications. Drawer member fastens to either side or bottom of drawer. Height 1.4". Required Clearance; Side: 1/2" plus 1/32" minus 0 each side. Top:1" required for drawer lift out. Bottom: None drawer can rest on cabinet. Packed with screws and installation instructions. Maximum drawer width 18". Attaches to the back of shelving to anchor shelf to back wall. Shelf clip "locks" shelving into place - attaching it at the top and bottom of shelf wire with or instead of wall clips. For concrete/stud and drywall installation. Material: Metal. Sturdy, shelf support and clothes rod hanger is designed for shelves 12" or larger. Embossed for extra strength. Brackets are punched for #12 wood screws. Adjusts 3/4" for use with or without hook strip. Holds up to 1-3/8" diameter rod. Rod mounts on 3" drop. Includes screws.
Closetmaid 26607 Support Bracket Knape & Vogt 1805HWH450 Euro Self-Close Drawer Slide Knape & Vogt 1175P ZC 20 Light Duty Single Track Drawer Slide
Preloaded with #8 pin drive and anchors. No.6606, 71925 and No. 21775. - For Organizer, Wardrobe, SuperSlide and Close Mesh Shelves 12" in depth; and Wardrobe or hanging SuperSlide shelves 16" in depth. No. 26607, 71924, and No.21776 - For Organizer, SuperSlide (in storage application), and Close Mesh shelves 16" in depth. No.26605 - For Organizer, Wardrobe, SuperSlide and Close Mesh Shelves 20" in depth. Specially designed for use in kitchen cabinet, commercial millwork, home office and RTA furniture applications. Adaptable to face frame or 32mm mounting. Single captive roller limits side play for improved lateral stability. Positive double out-stop. Positive in-stop. Lift-out disconnect. Four way adjustment slots. Positive lock-open position. Cabinet member side mounts. Additional rear mounting socket available for face frame applications. Drawer member fastens to either side or bottom of drawer. Height 1.4". Required Clearance; Side: 1/2" plus 1/32" minus 0 each side. Top:1" required for drawer lift out. Bottom: None drawer can rest on cabinet. Packed with screws and installation instructions. Maximum drawer width 18". Light-Duty slide designed for general drawer applications. Mounts with staples or screws. Height: 1". Required Clearance:1/8" each side; 1-1/2" from rear of drawer to cabinet; drawer to be 3/8" shallower than opening. High density polyethylene rollers. Drawers lift out for easy removal. Packaged with screws and installation instructions.
SLIDE DRWR 75LB 300MM WHT 12IN Knape & Vogt 1175P ZC 22-5/8 Light Duty Single Track Drawer Slide Stanley S822-094 Shelf/Rod Bracket
SHELF/ROD BRACKETS WHT
Our Price: $5.88
Specially designed for use in kitchen cabinet, commercial millwork, home office and RTA furniture applications. Adaptable to face frame or 32mm mounting. Single captive roller limits side play for improved lateral stability. Positive double out-stop. Positive in-stop. Lift-out disconnect. Four way adjustment slots. Positive lock-open position. Cabinet member side mounts. Additional rear mounting socket available for face frame applications. Drawer member fastens to either side or bottom of drawer. Height 1.4". Required Clearance; Side: 1/2" plus 1/32" minus 0 each side. Top:1" required for drawer lift out. Bottom: None drawer can rest on cabinet. Packed with screws and installation instructions. Maximum drawer width 18". Light-Duty slide designed for general drawer applications. Mounts with staples or screws. Height: 1". Required Clearance:1/8" each side; 1-1/2" from rear of drawer to cabinet; drawer to be 3/8" shallower than opening. High density polyethylene rollers. Drawers lift out for easy removal. Packaged with screws and installation instructions. Designed for mounting shelves and closet rods in closets, storage rooms, etc. Rod mounts on 3 inch drop for easy hanger use. Mount to stud for optimal load capacity. Punched for #12 wood screws. Bulk bagged.
Knape & Vogt 1805HWH500 Euro Self-Close Drawer Slide Knape & Vogt 1175P ZC 24 Light Duty Single Track Drawer Slide Knape & Vogt 256 Adjustable Dimple Pilaster Support
Specially designed for use in kitchen cabinet, commercial millwork, home office and RTA furniture applications. Adaptable to face frame or 32mm mounting. Single captive roller limits side play for improved lateral stability. Positive double out-stop. Positive in-stop. Lift-out disconnect. Four way adjustment slots. Positive lock-open position. Cabinet member side mounts. Additional rear mounting socket available for face frame applications. Drawer member fastens to either side or bottom of drawer. Height 1.4". Required Clearance; Side: 1/2" plus 1/32" minus 0 each side. Top:1" required for drawer lift out. Bottom: None drawer can rest on cabinet. Packed with screws and installation instructions. Maximum drawer width 18". Light-Duty slide designed for general drawer applications. Mounts with staples or screws. Height: 1". Required Clearance:1/8" each side; 1-1/2" from rear of drawer to cabinet; drawer to be 3/8" shallower than opening. High density polyethylene rollers. Drawers lift out for easy removal. Packaged with screws and installation instructions. Snaps securely into place. For use with No. 233 and No. 255. High strength steel.
Knape & Vogt 1805HWH550 Euro Self-Close Drawer Slide Orbinni 76500 Over-The-Door Hook Closetmaid 7546 Down Clip/Anchor
Specially designed for use in kitchen cabinet, commercial millwork, home office and RTA furniture applications. Adaptable to face frame or 32mm mounting. Single captive roller limits side play for improved lateral stability. Positive double out-stop. Positive in-stop. Lift-out disconnect. Four way adjustment slots. Positive lock-open position. Cabinet member side mounts. Additional rear mounting socket available for face frame applications. Drawer member fastens to either side or bottom of drawer. Height 1.4". Required Clearance; Side: 1/2" plus 1/32" minus 0 each side. Top:1" required for drawer lift out. Bottom: None drawer can rest on cabinet. Packed with screws and installation instructions. Maximum drawer width 18". Chrome-plated. Ideal for bedroom and bedroom closets for purses, scarves, clothes, jackets, towels and more. Fits over top of any standard-thickness interior door. Attaches to the back of shelving to anchor shelf to back wall. For concrete/stud and drywall installation. Package includes 12 clips, 12 anchors and 12 #8 screws.
Closetmaid 7540 Small End Cap Closetmaid 26605 Support Bracket HANGER SCARF 8 LOOP CHROME
Vinyl end cap provides protection from cut end of wire shelving that exposes possible rough edges. Large end caps cover the large rod, 0 gauge, .25"H x .4"W x .4"D. Small end caps are for the 4 gauge wire, .2"H x .2"W x .2"D. Designed to be used with ClosetMaid - Shelf & Rod shelving. Preloaded with #8 pin drive and anchors. No.6606, 71925 and No. 21775. - For Organizer, Wardrobe, SuperSlide and Close Mesh Shelves 12" in depth; and Wardrobe or hanging SuperSlide shelves 16" in depth. No. 26607, 71924, and No.21776 - For Organizer, SuperSlide (in storage application), and Close Mesh shelves 16" in depth. No.26605 - For Organizer, Wardrobe, SuperSlide and Close Mesh Shelves 20" in depth. InterDesign Scarf Hanger, Series: Classico, 13 in Length, 1/2 in Width, 9-3/4 in Height, 8 Hooks, Steel, Silver, Chrome, For Hanging and Organizing Scarves
HANGER SCARF 8 LOOP BRONZE    BIN FABRIC LARGE MOCHA        BIN FABRIC LARGE BROWN
InterDesign Scarf Hanger, Series: Classico, 13 in Length, 9-3/4 in Height, 8 Hooks, Steel, Black, Bronze, For Hanging Scarves, Wraps and Ties Outside dimensions: 6.9"H x 8"W x 11"D. Features write-on label. Outside dimensions: 6.9"H x 8"W x 11"D. Features write-on label.
Knape & Vogt 1284PWH400 Euro Roller Slide Closetmaid 6606 Support Bracket Homebasix SS-HG3-50-PE-3L Garment Racks
Medium-duty slide designed for kitchen cabinet and bathroom vanity applications. Adaptable to frame mounting and 32mm mounting system. Solid stud and captive roller reduces side play. Positive stop, lift-out disconnect, stay-closed design. Adjustment slots on both the drawer member and the cabinet member ease installation. Screws fasten to either side or bottom of drawer. Positive lock-out feature is ideal for pull out work surfaces. Height: 1-9/32". Required Clearance: 1/2" plus 1/32" minus 0 each side. 1" between overall drawer side height and cabinet opening height required for drawer insertion and removal. Packaged with screws and installation instructions. Maximum drawer width 18". Preloaded with #8 pin drive and anchors. No.6606, 71925 and No. 21775. - For Organizer, Wardrobe, SuperSlide and Close Mesh Shelves 12" in depth; and Wardrobe or hanging SuperSlide shelves 16" in depth. No. 26607, 71924, and No.21776 - For Organizer, SuperSlide (in storage application), and Close Mesh shelves 16" in depth. No.26605 - For Organizer, Wardrobe, SuperSlide and Close Mesh Shelves 20" in depth. Ideal for hanging clothes or towels. Fits the top of most standard household doors. 20"W x 11-3/8"H x 3'D.
Homebasix 05000862P Closet Drawer Homebasix 05000862N Closet Drawer Knape & Vogt 1284PWH450 Drawer Slide
Size: 11" x 10-1/2" x 10-1/2". Size: 11" x 10-1/2" x 10-1/2". Medium-duty slide designed for kitchen cabinet and bathroom vanity applications. Adaptable to frame mounting and 32mm mounting system. Solid stud and captive roller reduces side play. Positive stop, lift-out disconnect, stay-closed design. Adjustment slots on both the drawer member and the cabinet member ease installation. Screws fasten to either side or bottom of drawer. Positive lock-out feature is ideal for pull out work surfaces. Height: 1-9/32". Required Clearance: 1/2" plus 1/32" minus 0 each side. 1" between overall drawer side height and cabinet opening height required for drawer insertion and removal. Packaged with screws and installation instructions. Maximum drawer width 18".
Orbinni 76600 Over-The-Door Valet Homebasix SS-HG6-50-PE-3L Garment Racks Knape & Vogt RP-0495-WT Non-Adjustable Shelf and Rod Bracket
Bright chrome finish valet mounts over door in seconds. Ideal for hanging clothes or towels. Fits the top of most standard household doors. Holds up to 500 pounds.Slide thru and snap-in pole features.
Knape & Vogt 1260P-16 Light Duty Drawer Slide Knape & Vogt 1284PALM500 Euro Roller Slide Knape & Vogt 1284PWH500 Drawer Slide
Light-Duty slide designed for general cabinet, desk and fixture application. Height: 3-1/8". Required Clearance: 1/2" plus 1/32" minus 0 each side. Features Positive stop. Stay-closed design. Depress stop lever for drawer removal. Dust shielded ball bearing rollers. Packaged with screws and installation instructions. Maximum drawer width 18". Medium-duty slide designed for kitchen cabinet and bathroom vanity applications. Adaptable to frame mounting and 32mm mounting system. Solid stud and captive roller reduces side play. Positive stop, lift-out disconnect, stay-closed design. Adjustment slots on both the drawer member and the cabinet member ease installation. Screws fasten to either side or bottom of drawer. Positive lock-out feature is ideal for pull out work surfaces. Height: 1-9/32". Required Clearance: 1/2" plus 1/32" minus 0 each side. 1" between overall drawer side height and cabinet opening height required for drawer insertion and removal. Packaged with screws and installation instructions. Maximum drawer width 18". Medium-duty slide designed for kitchen cabinet and bathroom vanity applications. Adaptable to frame mounting and 32mm mounting system. Solid stud and captive roller reduces side play. Positive stop, lift-out disconnect, stay-closed design. Adjustment slots on both the drawer member and the cabinet member ease installation. Screws fasten to either side or bottom of drawer. Positive lock-out feature is ideal for pull out work surfaces. Height: 1-9/32". Required Clearance: 1/2" plus 1/32" minus 0 each side. 1" between overall drawer side height and cabinet opening height required for drawer insertion and removal. Packaged with screws and installation instructions. Maximum drawer width 18".
Knape & Vogt 1260P-18 Light Duty Drawer Slide Knape & Vogt 1300P ZC 12 Drawer Slide Knape & Vogt 1284PALM550 Euro Roller Slide
Light-Duty slide designed for general cabinet, desk and fixture application. Height: 3-1/8". Required Clearance: 1/2" plus 1/32" minus 0 each side. Features Positive stop. Stay-closed design. Depress stop lever for drawer removal. Dust shielded ball bearing rollers. Packaged with screws and installation instructions. Maximum drawer width 18". Designed for medium duty applications where a lever release is desired. For kitchen cabinet, vanity, desk and store fixture applications. Height: 3".  Required Clearance: 1/2" plus 1/32" minus 0 each side. Features Positive stop lever that prevents accidental drawer removal.  Zinc-plated cold rolled steel. Ball bearing nylon rollers. Packaged with screws and installation instructions. Maximum drawer width 18". Medium-duty slide designed for kitchen cabinet and bathroom vanity applications. Adaptable to frame mounting and 32mm mounting system. Solid stud and captive roller reduces side play. Positive stop, lift-out disconnect, stay-closed design. Adjustment slots on both the drawer member and the cabinet member ease installation. Screws fasten to either side or bottom of drawer. Positive lock-out feature is ideal for pull out work surfaces. Height: 1-9/32". Required Clearance: 1/2" plus 1/32" minus 0 each side. 1" between overall drawer side height and cabinet opening height required for drawer insertion and removal. Packaged with screws and installation instructions. Maximum drawer width 18".
Knape & Vogt 1284PWH550 Drawer Slide Knape & Vogt 1300P ZC 14 Drawer Slide Knape & Vogt 1260P-20 Light Duty Drawer Slide
Medium-duty slide designed for kitchen cabinet and bathroom vanity applications. Adaptable to frame mounting and 32mm mounting system. Solid stud and captive roller reduces side play. Positive stop, lift-out disconnect, stay-closed design. Adjustment slots on both the drawer member and the cabinet member ease installation. Screws fasten to either side or bottom of drawer. Positive lock-out feature is ideal for pull out work surfaces. Height: 1-9/32". Required Clearance: 1/2" plus 1/32" minus 0 each side. 1" between overall drawer side height and cabinet opening height required for drawer insertion and removal. Packaged with screws and installation instructions. Maximum drawer width 18". Designed for medium duty applications where a lever release is desired. For kitchen cabinet, vanity, desk and store fixture applications. Height: 3".  Required Clearance: 1/2" plus 1/32" minus 0 each side. Features Positive stop lever that prevents accidental drawer removal.  Zinc-plated cold rolled steel. Ball bearing nylon rollers. Packaged with screws and installation instructions. Maximum drawer width 18". Light-Duty slide designed for general cabinet, desk and fixture application. Height: 3-1/8". Required Clearance: 1/2" plus 1/32" minus 0 each side. Features Positive stop. Stay-closed design. Depress stop lever for drawer removal. Dust shielded ball bearing rollers. Packaged with screws and installation instructions. Maximum drawer width 18".
Interdesign 6560 CLC Vertical Tie/Belt Rack Inter-Design 06561 Classico Vertical Tie/Belt Rack Amerock TMPMULTI Cabinet Door and Drawer Template
Plated steel wire to hang ties, belts, scarves, etc. Packaged with hang tab. Interdesign Vertical Tie/Belt Rack, Classico, 16 Hooks, Steel, Bronze Alignment guide for mounting cabinet knobs and pulls on cabinet drawers and doors. For standard pull mounting of 3" (76mm), 3-3/4" (96mm), and 5" (128mm) hole spacing. Includes: (1) template for drawers, (1) template for doors, (1) drill bit and Easy to read instructions.
SuperSlide 25633 Corner Corner Round Bar Closetmaid 8711-17 Drawer Closetmaid 877-17 Drawer
Use with SuperSlide shelving to create uninterrupted sliding action around corners for walk-in closets. Tapered ends slide easily into ClosetMaid, SuperSlide hang rods. Support connection of hang rod with a Hang Bar Support. 0.75?H x 10.25?W x 10.25?DMaterial: Epoxy coated steel. Provides storage space. Fits into most cubical storage units. Size: 11"H x 11"W x 11"D. Provides storage space. Fits into most cubical storage units. Size: 11"H x 11"W x 11"D.
Closetmaid 434-17 Drawer Closetmaid 786 Drawer Closetmaid 784 Drawer
Provides storage space. Fits into most cubical storage units. Size: 11"H x 11"W x 11"D. Provides storage space. Fits into most cubical storage units. Size: 11"H x 11"W x 11"D. Provides storage space. Fits into most cubical storage units. Size: 11"H x 11"W x 11"D.
Closetmaid 8699-17 Drawer Knape & Vogt 1300P ZC 18 Drawer Slide Closetmaid 8700-17 Drawer
Provides storage space. Fits into most cubical storage units. Size: 11"H x 11"W x 11"D. Designed for medium duty applications where a lever release is desired. For kitchen cabinet, vanity, desk and store fixture applications. Height: 3".  Required Clearance: 1/2" plus 1/32" minus 0 each side. Features Positive stop lever that prevents accidental drawer removal.  Zinc-plated cold rolled steel. Ball bearing nylon rollers. Packaged with screws and installation instructions. Maximum drawer width 18". Provides storage space. Fits into most cubical storage units. Size: 11"H x 11"W x 11"D.
Knape & Vogt 1300P ZC 16 Drawer Slide Knape & Vogt 1260P-22 Light Duty Drawer Slide DRAWER FABRIC BLUE 11IN HEIGHT
Designed for medium duty applications where a lever release is desired. For kitchen cabinet, vanity, desk and store fixture applications. Height: 3".  Required Clearance: 1/2" plus 1/32" minus 0 each side. Features Positive stop lever that prevents accidental drawer removal.  Zinc-plated cold rolled steel. Ball bearing nylon rollers. Packaged with screws and installation instructions. Maximum drawer width 18". Light-Duty slide designed for general cabinet, desk and fixture application. Height: 3-1/8". Required Clearance: 1/2" plus 1/32" minus 0 each side. Features Positive stop. Stay-closed design. Depress stop lever for drawer removal. Dust shielded ball bearing rollers. Packaged with screws and installation instructions. Maximum drawer width 18". Provides storage space. Fits into most cubical storage units. Size: 11"H x 11"W x 11"D.
Knape & Vogt PBP10016 Precision Drawer Slide HANGER SCARF AXIS CHROME18LOOP HANGER SCARF AXIS BRONZE18LOOP
Direct access mounting holes, precision ball bearings, telescopic action, non-handed design, and lever disconnect. Includes screws for installation. Height: 1-1/8". Clearance required: 1/2" plus 1/32" minus 0 each side. Maximum drawer width 24". Snag-free, continuous loop design. No installation needed, simply store and hang. Hang scarves, ties, and more. Size: 11.5" x .5" x 9.5". Snag-free, continuous loop design. No installation needed, simply store and hang. Hang scarves, ties, and more. Size: 11.5" x .5" x 9.5".
RACK OVER DOOR 3 HOOK CHROME  RACK OVER DOOR 3 HOOK BRONZE  Knape & Vogt 1300P ZC 20 Drawer Slide
InterDesign Over The Rod Hook, Series: Classico, 4-1/2 in Width, 10-3/4 in Length, 3 Hooks, Door Mounting, Steel, Chrome, For Jackets, Towels, Robes, Scarves, Ties, Belts and Other Clothing Accessories InterDesign Over The Rod Hook, Series: Classico, 4-1/2 in Width, 10-3/4 in Length, 3 Hooks, Door Mounting, Steel, Bronze, For Jackets, Towels, Robes, Scarves, Ties, Belts and Other Clothing Accessories Designed for medium duty applications where a lever release is desired. For kitchen cabinet, vanity, desk and store fixture applications. Height: 3".  Required Clearance: 1/2" plus 1/32" minus 0 each side. Features Positive stop lever that prevents accidental drawer removal.  Zinc-plated cold rolled steel. Ball bearing nylon rollers. Packaged with screws and installation instructions. Maximum drawer width 18".
Stanley S822-092 Shelf/Rod Bracket Knape & Vogt 1300P ZC 22 Drawer Slide Stanley S822-091 Shelf/Rod Bracket
Designed for mounting shelves and closet rods in closets, storage rooms, etc. Rod mounts on 3 inch drop for easy hanger use. Mount to stud for optimal load capacity. Punched for #12 wood screws. Bulk bagged. Designed for medium duty applications where a lever release is desired. For kitchen cabinet, vanity, desk and store fixture applications. Height: 3".  Required Clearance: 1/2" plus 1/32" minus 0 each side. Features Positive stop lever that prevents accidental drawer removal.  Zinc-plated cold rolled steel. Ball bearing nylon rollers. Packaged with screws and installation instructions. Maximum drawer width 18". Designed for mounting shelves and closet rods in closets, storage rooms, etc. Rod mounts on 3 inch drop for easy hanger use. Mount to stud for optimal load capacity. Punched for #12 wood screws. Bulk bagged.
Stanley S822-093 Shelf/Rod Bracket Knape & Vogt PBP10018 Precision Drawer Slide Knape & Vogt 1300P ZC 24 Drawer Slide
Designed for mounting shelves and closet rods in closets, storage rooms, etc. Rod mounts on 3 inch drop for easy hanger use. Mount to stud for optimal load capacity. Punched for #12 wood screws. Bulk bagged. Direct access mounting holes, precision ball bearings, telescopic action, non-handed design, and lever disconnect. Includes screws for installation. Height: 1-1/8". Clearance required: 1/2" plus 1/32" minus 0 each side. Maximum drawer width 24". Designed for medium duty applications where a lever release is desired. For kitchen cabinet, vanity, desk and store fixture applications. Height: 3".  Required Clearance: 1/2" plus 1/32" minus 0 each side. Features Positive stop lever that prevents accidental drawer removal.  Zinc-plated cold rolled steel. Ball bearing nylon rollers. Packaged with screws and installation instructions. Maximum drawer width 18".
SuperSlide 2058 Closet Rod Knape & Vogt PBP10020 Precision Drawer Slide MAILBOX PLASTIC STD BLK
Snaps into the Closet Rod Support to allow hangers to slide without interruption. Can be cut to customize length . Holds up to 30lbs per foot. Material: Epoxy coated steel. Direct access mounting holes, precision ball bearings, telescopic action, non-handed design, and lever disconnect. Includes screws for installation. Height: 1-1/8". Clearance required: 1/2" plus 1/32" minus 0 each side. Maximum drawer width 24". Comes fully assembled and ready to install. Made of durable polypropylene material with an ultraviolet inhibitor for protection from weathering and is rust resistant.  Medium size for magazines, letters and padded mailers. Size: 9.6" H x 7.9" W x 19.4" D.
MAILBOX STD - WHT             Homebasix HK06-CH Garment Hook & Rack Knape & Vogt PBP10022 Precision Drawer Slide
Comes fully assembled and ready to install. Made of durable polypropylene material with an ultraviolet inhibitor for protection from weathering and is rust resistant.  Medium size for magazines, letters and padded mailers. Size: 9.6" H x 7.9" W x 19.4" D. Ideal for hanging clothes or towels. Fits the top of most standard household doors. Chrome finish. Size: 8-3/4"W x 9-1/2"H x 3"D. Direct access mounting holes, precision ball bearings, telescopic action, non-handed design, and lever disconnect. Includes screws for installation. Height: 1-1/8". Clearance required: 1/2" plus 1/32" minus 0 each side. Maximum drawer width 24".
RACK OVER DOOR 6 HOOK BRONZE  MAILBOX RURAL SILVER GRAY     Closetmaid 7556 U Clip
InterDesign Over The Rod Hook, Series: Classico, 10-3/4 in Height, 5 in Width, 18-3/4 in Length, 6 Hooks, Door Mounting, Steel, Bronze, For Jackets, Towels, Robes, Scarves, Ties, Belts and Other Clothing Accessories Constructed of a galvanized steel that features a heavy-duty ribbed construction. Door comes with a black plastic latch and flag. Some assembly is required. Size: 9.5" H x 7" W x 20.3" D. Attaches to the back of shelving to anchor shelf to back wall. Shelf clip "locks" shelving into place - attaching it at the top and bottom of shelf wire with or instead of wall clips. For concrete/stud and drywall installation. Material: Metal.
Homebasix HK07-CH Garment Hook and Rack PEG SHELF MINI 1/4 CLR PLASTIC Knape & Vogt 89 1-Piece Decorative Straight Shelf Kit
Ideal for hanging clothes or towels. Fits the top of most standard household doors. Chrome finish. Size: 14"W x 9-1/2"H x 3"D. Sleeved. Mini-style frequently used in stereo and display cabinets. 1/2"D support, 1/4"OD x 3/8"L peg. 12 lbs. per peg maximum safe-weight load. One piece design, polished edge, radiused corners. Kit includes 1/4" tempered glass shelf, shelf anchor, mounting screws and easy-to-follow instructions.
Closetmaid 21782 Shelf End Wall Bracket Closetmaid 1770 Back Wall Clip Interdesign York Lyra 53470 Over-The-Door Rack
Heavy duty preloaded bracket with anchor easily mounts to the wall and holds the end of any size ClosetMaid shelf. Provides side wall support. Supports front lip of shelving where it meets the side wall. For drywall installations. Includes: 2.875"H x 2.125"W x 1.75"D. Material: Resin. Anchors shelf to wall. Ensures stability of shelf. Packed with pegable header, no hardware needed.
SuperSlide 1741 Wall Bracket Homebasix C02Z6JF5000-3L 10-Layer Canvas Shoe Shelf Knape & Vogt KT-0134-812SN Curved Shelf Kit 12 in L x 8 in W
Supports low profile SuperSlide shelving in a wall to wall installation. Includes: 2 wall brackets, 4 pins and 4 anchors. Use in conjunction with support brackets and wall clips for installing wire shelving. Suports front lip of shelving where it meets the side wall. 2"H x 2.19W x 1.75"D. Material: Resin Use to store up to 10 pairs of shoes. Hangs from a standard size closet rod. Features a tempered glass shelf, satin nickel wall clamps and mounting hardware included.
Closetmaid 8995 Horizontal Closet Organizer Knape & Vogt 8400P16 Full Extension Drawer Slide Knape & Vogt 8400P12 Full Extension Drawer Slide
Convenient way to hold shoes, hobbies, media and office supplies. Designed to work perfectly with other Stackable Storage Organizers. 11.63"H x 24.13"W x 11.63"D. Medium-duty, precision slides for box drawer or pedestal file drawers up to 24" wide. For frame and frameless construction. May be used horizontal position with a reduced load rating of 30 pounds. Height:1-13/16" Clearance required: 1/2" plus 1/32" minus 0 each side. Features telescoping, full extension on precision steel ball bearings. 32mm hole pattern with direct access mounting. Lever disconnect for easy drawer removal. Ball retainer latch and ramps, for easy drawer insertion. Drawer adjustment without removal. Flexible mounting tabs self-adjust to side clearance. Metal ball retainer holds 3 bearings per inch of race for smooth and quiet motion. Polymer stop cushions. Non-handed. Packaged with screws and installation instructions. Medium-duty, precision slides for box drawer or pedestal file drawers up to 24" wide. For frame and frameless construction. May be used horizontal position with a reduced load rating of 30 pounds. Height:1-13/16" Clearance required: 1/2" plus 1/32" minus 0 each side. Features telescoping, full extension on precision steel ball bearings. 32mm hole pattern with direct access mounting. Lever disconnect for easy drawer removal. Ball retainer latch and ramps, for easy drawer insertion. Drawer adjustment without removal. Flexible mounting tabs self-adjust to side clearance. Metal ball retainer holds 3 bearings per inch of race for smooth and quiet motion. Polymer stop cushions. Non-handed. Packaged with screws and installation instructions.
PEG SHELF 5MM WHITE MTL/PLASTC Knape & Vogt 8400P14 Full Extension Drawer Slide Knape & Vogt 8400P18 Full Extension Drawer Slide
Fits a 5 mm dia. hole (3/16"); plastic seat with metal peg provides added strength. Metrically sized for most imported cabinet and bookshelves. 15 lbs. maximum safe load per peg. Medium-duty, precision slides for box drawer or pedestal file drawers up to 24" wide. For frame and frameless construction. May be used horizontal position with a reduced load rating of 30 pounds. Height:1-13/16" Clearance required: 1/2" plus 1/32" minus 0 each side. Features telescoping, full extension on precision steel ball bearings. 32mm hole pattern with direct access mounting. Lever disconnect for easy drawer removal. Ball retainer latch and ramps, for easy drawer insertion. Drawer adjustment without removal. Flexible mounting tabs self-adjust to side clearance. Metal ball retainer holds 3 bearings per inch of race for smooth and quiet motion. Polymer stop cushions. Non-handed. Packaged with screws and installation instructions. Medium-duty, precision slides for box drawer or pedestal file drawers up to 24" wide. For frame and frameless construction. May be used horizontal position with a reduced load rating of 30 pounds. Height:1-13/16" Clearance required: 1/2" plus 1/32" minus 0 each side. Features telescoping, full extension on precision steel ball bearings. 32mm hole pattern with direct access mounting. Lever disconnect for easy drawer removal. Ball retainer latch and ramps, for easy drawer insertion. Drawer adjustment without removal. Flexible mounting tabs self-adjust to side clearance. Metal ball retainer holds 3 bearings per inch of race for smooth and quiet motion. Polymer stop cushions. Non-handed. Packaged with screws and installation instructions.
Knape & Vogt KT-0134-1212SN Decorative Corner Glass Shelf Kit Knape & Vogt KT-0134-624SN Straight Decorative Shelf Kit Closetmaid 1009 Shelf Support Pole
1/4" Tempered glass for strength and safety. Satin nickel wall clamps and mounting hardware included. Features a tempered glass shelf, satin nickel wall clamps and mounting hardware included. Use in place of support brackets when stacking 2 or more shelves. Pre-drilled holes for easy shelf location. Includes: 2 pole pieces (43 in. each) 1 pole joiner, 2 pole caps, and hardware. Material: Epoxy coated steel.
Knape & Vogt 8400P20 Full Extension Drawer Slide Knape & Vogt 8400P22 Full Extension Drawer Slide MAILBOX STD WHITE STL POST MNT
Medium-duty, precision slides for box drawer or pedestal file drawers up to 24" wide. For frame and frameless construction. May be used horizontal position with a reduced load rating of 30 pounds. Height:1-13/16" Clearance required: 1/2" plus 1/32" minus 0 each side. Features telescoping, full extension on precision steel ball bearings. 32mm hole pattern with direct access mounting. Lever disconnect for easy drawer removal. Ball retainer latch and ramps, for easy drawer insertion. Drawer adjustment without removal. Flexible mounting tabs self-adjust to side clearance. Metal ball retainer holds 3 bearings per inch of race for smooth and quiet motion. Polymer stop cushions. Non-handed. Packaged with screws and installation instructions. Medium-duty, precision slides for box drawer or pedestal file drawers up to 24" wide. For frame and frameless construction. May be used horizontal position with a reduced load rating of 30 pounds. Height:1-13/16" Clearance required: 1/2" plus 1/32" minus 0 each side. Features telescoping, full extension on precision steel ball bearings. 32mm hole pattern with direct access mounting. Lever disconnect for easy drawer removal. Ball retainer latch and ramps, for easy drawer insertion. Drawer adjustment without removal. Flexible mounting tabs self-adjust to side clearance. Metal ball retainer holds 3 bearings per inch of race for smooth and quiet motion. Polymer stop cushions. Non-handed. Packaged with screws and installation instructions. Smooth rust resistant galvanized steel mailbox comes fully assembled with steel latch and aluminum flag. Medium capacity is standard in most households and can hold letters, magazines, padded mailers and small boxes.  Size: 8.9"H x 6.9"W 20.1"D.
MAILBOX STD BLK PST MT        Knape & Vogt 89 1-Piece Decorative Straight Shelf Kit PEG SHELF 1/4 NICKL PLATED MTL
Smooth rust resistant galvanized steel mailbox comes fully assembled with steel latch and aluminum flag. Medium capacity is standard in most households and can hold letters, magazines, padded mailers and small boxes.  Size: 8.9"H x 6.9"W 20.1"D. One piece design, polished edge, radiused corners. Kit includes 1/4" tempered glass shelf, shelf anchor, mounting screws and easy-to-follow instructions. Hole 3/8" deep; 1/2"  Metrically sized for most imported cabinets and bookshelves. 20 lbs. maximum safe load per peg.
PEG SHELF 5MM BRASS PLATED MTL MAILBOX STD GREEN STL POST MNT MAILBOX STD BRNZ STL POST MNT
Hole 3/8" deep; 1/2"  Metrically sized for most imported cabinets and bookshelves. 20 lbs. maximum safe load per peg. Smooth rust resistant galvanized steel mailbox comes fully assembled with steel latch and aluminum flag. Medium capacity is standard in most households and can hold letters, magazines, padded mailers and small boxes.  Size: 8.9"H x 6.9"W 20.1"D. Smooth rust resistant galvanized steel mailbox comes fully assembled with steel latch and aluminum flag. Medium capacity is standard in most households and can hold letters, magazines, padded mailers and small boxes.  Size: 8.9"H x 6.9"W 20.1"D.
Closetmaid 8953-00 Stackable Vertical Closet Organizer Closetmaid 8923 Stackable Horizontal Closet Organizer Closetmaid 8963-00 Stackable Horizontal Closet Organizer
Provides storage space in closet. Size: 31-1/2" x 12.13" x 11.63". Convenient way to hold shoes, hobbies, media and office supplies. Designed to work perfectly with other Stackable Storage Organizers. 11.63"H x 24.13"W x 11.63"D. Convenient way to hold shoes, hobbies, media and office supplies. Designed to work perfectly with other Stackable Storage Organizers. 11.63"H x 24.13"W x 11.63"D.
Closetmaid 8956 Vertical Closet Organizer Homebasix CO4J6JF5000-3L Shoe Organizer Knape & Vogt 8450FMP 16 Full Extension Soft Close Drawer Slide
Provides storage space in closet. Size: 31-1/2" x 12.13" x 11.63". Use to store 10 Pairs of shoes. For organizing shoes behind the door. Shoes not included. Designed for use on box drawer applications up to 24" wide where the maximum weight load is not to exceed 100 pounds. Product features a "soft-close" module that eliminates drawer slamming. Clearance required: 1/2" plus 1/23" minus 0". Height: 1-13/16".
Knape & Vogt 8450FMP 18 Full Extension Soft Close Drawer Slide Knape & Vogt 8450FMP 20 Full Extension Soft Close Drawer Slide Knape & Vogt 8450FMP 22 Full Extension Soft Close Drawer Slide
Designed for use on box drawer applications up to 24" wide where the maximum weight load is not to exceed 100 pounds. Product features a "soft-close" module that eliminates drawer slamming. Clearance required: 1/2" plus 1/23" minus 0". Height: 1-13/16". Designed for use on box drawer applications up to 24" wide where the maximum weight load is not to exceed 100 pounds. Product features a "soft-close" module that eliminates drawer slamming. Clearance required: 1/2" plus 1/23" minus 0". Height: 1-13/16". Designed for use on box drawer applications up to 24" wide where the maximum weight load is not to exceed 100 pounds. Product features a "soft-close" module that eliminates drawer slamming. Clearance required: 1/2" plus 1/23" minus 0". Height: 1-13/16".
Knape & Vogt 1980 Pre-Finished All Purpose Shelf Board Knape & Vogt 1980 ESP 8X24 Decorative Regular Duty Shelf Board Prime-Line R 7265 Socket Rear Drawer Track
Made of 5/8" thick particleboard. Simulated woodgrain finish is produced by an exacting photo-processing technique. Includes precision edge banding. Holds up to 200 Lbs. Made of 5/8" thick particleboard. Simulated woodgrain finish is produced by an exacting photo-processing technique. Includes precision edge banding. Holds up to 200 Lbs. Socket depth allows for front to back adjustment of the rail. Used on side mounted drawer track systems. Raw finish.
Closetmaid 8987-00 Stackable Open Storage Organizer Giles & Kendall 4051 Closet Panel Homebasix C0126JF5000 6-Layer Canvas Sweater Shelf
Three spacious shelves with enclosed back is great for your closet or in your office. Features two adjustable shelves. Size: 31-1/2" x 12.125" x 11.625". Made from 100% aromatic eastern redcedar cut-to-size panels for do-it-yourself handling and installation. Naturally repel and resist insect pests such as roaches, silverfish, moths and mildew. Ideal for lining and protecting your closets, pantries, under sink cabinet areas, off-season attic and basement storage areas.  Each pack contains 4 pieces, 16"x48"x1/4" panels, for a total of 21.3 SF per box. Use for clothing, purses, and shoes. Hangs from a standard size closet rod.
MAILBOX LG WHITE HDTY POST MNT Solar MB505B Roughneck Standard Rural Mailbox MAILBOX LGE BLK H-DTY POST MNT
Classic large, rural mailbox comes fully assembled with steel latch and aluminum flag. Large capacity can hold several pieces of mail and small parcel. Smooth rust resistant powder coat finish. Size: 10.9"H x 8.7"W x 22.6"D. Rustproof polypropylene plastic resists impacts and all types of weather while providing outstanding service. The mailbox body incorporates a ribbed design on top and textured side panels. Medium size holds magazines, padded mailers and small boxes. Comes fully assembled. Size: 9.8" H x 7.9" W x 20.4" D. Classic large, rural mailbox comes fully assembled with steel latch and aluminum flag. Large capacity can hold several pieces of mail and small parcel. Smooth rust resistant powder coat finish. Size: 10.9"H x 8.7"W x 22.6"D.
RURAL MAILBOX ELITE GREEN     Prime-Line R 7316 Locking Shelf Peg Knape & Vogt 1980 Pre-Finished All Purpose Shelf Board
Classic large, rural mailbox comes fully assembled with steel latch and aluminum flag. Large capacity can hold several pieces of mail and small parcel. Smooth rust resistant powder coat finish. Size: 10.9"H x 8.7"W x 22.6"D. 1/2" shelves. Made of 5/8" thick particleboard. Simulated woodgrain finish is produced by an exacting photo-processing technique. Includes precision edge banding. Holds up to 200 Lbs.
Giles & Kendall FL60/15N Tongue and Groove Closet Liner Plank Solar MB515B Large Roughneck Rural Mailbox Knape & Vogt 1980 Decorative Regular Duty Prefinished Shelf Board
Hand-selected, finest-quality cedar planks easily installed to add value to home by repelling and resisting cockroaches, silverfish, moths, and mildew with a natural, fresh scent. Planks: 1/4"T x 3-3/4"W. Includes varying lengths of 12" to 48". Rustproof polypropylene plastic construction provides durability while the ribbed body adds strength. Incoming mail flag notifies homeowners of deliveries. Wide, large opening easily holds small packages along with daily mail. Size: 9.5"H x 12.4"W x 21.3"D. Made of 5/8" thick particleboard. Simulated woodgrain finish is produced by an exacting photo-processing technique. Includes precision edge banding. Holds up to 200 Lbs.
Knape & Vogt 1980 ESP 10X24 Decorative Regular Duty Shelf Board Closetmaid 8983-00 Stackable Shoe Organizer ShelfTrack 21775 Shelf Bracket
Made of 5/8" thick particleboard. Simulated woodgrain finish is produced by an exacting photo-processing technique. Includes precision edge banding. Holds up to 200 Lbs. Provides storage space for shoes or other small objects. Features fifteen compartments. Size: 19-3/8" x 24-1/8" x 11-5/8". Preloaded with #8 pin drive and anchors. No.6606, 71925 and No. 21775. - For Organizer, Wardrobe, SuperSlide and Close Mesh Shelves 12" in depth; and Wardrobe or hanging SuperSlide shelves 16" in depth. No. 26607, 71924, and No.21776 - For Organizer, SuperSlide (in storage application), and Close Mesh shelves 16" in depth. No.26605 - For Organizer, Wardrobe, SuperSlide and Close Mesh Shelves 20" in depth.
SHELF/ROD SUPPORT STD WHITE   ShelfTrack 21776 Shelf Bracket Knape & Vogt 1980 Decorative Regular Duty Prefinished Shelf Board
For use with closet rods up to 1-3/8" diameter. Corrugated steel for extra strength. Sturdy two piece design facilitates installation. Size: 12-3/4" x 9-1/4". UPC labeled. Preloaded with #8 pin drive and anchors. No.6606, 71925 and No. 21775. - For Organizer, Wardrobe, SuperSlide and Close Mesh Shelves 12" in depth; and Wardrobe or hanging SuperSlide shelves 16" in depth. No. 26607, 71924, and No.21776 - For Organizer, SuperSlide (in storage application), and Close Mesh shelves 16" in depth. No.26605 - For Organizer, Wardrobe, SuperSlide and Close Mesh Shelves 20" in depth. Made of 5/8" thick particleboard. Simulated woodgrain finish is produced by an exacting photo-processing technique. Includes precision edge banding. Holds up to 200 Lbs.
Knape & Vogt 1980 Decorative Regular Duty Prefinished Shelf Board Knape & Vogt 1980 ESP 12X24 Decorative Regular Duty Shelf Board