Home > HARDWARE > GENERAL HARDWARE > SHELVING & CLOSET > SHELF NAILS/SCREWS
Sort By:
1
Amerock Allison BP3401CB Cabinet Pull National Hardware V108S Pole Socket Screw Amerock Allison 894ABS Cabinet Pull
SCREWS WHITE
Our Price: $1.27
Pull with 3-1/4" center, 5-1/16" length x 1" width x 3/4" height. Use with two #8-32 x 1" type screws. National Hardware Pole Socket Screw, Series: V108S, NO 12 Screw, 1-1/2 in Length, Round Head, Phillips Drive, Steel, White, BHMA A138.18 Pull with 3" center, 4-5/16" length x 7/8" height. Use with two #8-32 x 1" type screws.
National Hardware V211S Bracket Screw SCREW BRCKT ZINC PLATED       SCREW BRCKT FRTWD 12PK
National Hardware Bracket Screw, Series: V211S, NO 7 Screw, 1-1/4 in Length, 1/2 in Drive, Steel, Zinc Plated, BHMA A138.18 For brackets. #7 x 3/4? & 1-1/4?. Visual-pack. Designed to attach National model No. 211 brackets to walls and shelves. 6 each No. 7 x 1-1/2" and 6 each No. 7 x 1/2" per pack. Visual-pack.
SuperSlide 948 Pre-Loaded Wall Bracket National Hardware V152S Bracket Screw BRACKET SHELF ANT BRNZ
SHELF BRACKETS ANT WHT
Our Price: $1.59
SHELF BRACKETS ANT BRNZ
Our Price: $1.59
Secures shelf to side wall of closet. Pre-loaded with pins and anchors, no screws needed. Accommodates pole clips and shelf stops in "TotalSlide" system. National Hardware Bracket Screw, Series: V152S, NO 7 Screw, 1/2 - 1-1/2 in Length, Truss Head, Phillips Drive, Steel, Antique White Designed for mounting National's #152 brackets. Phillips truss screws, 4 each of 7 x 1/2 and 7 x 1-1/2 inch. Visual-pack.
BRACKET SHELF ANT BLACK       Closetmaid 01016 End Cap SuperSlide 5629 Closet Rod Support
SHELF BRACKETS ANT BLK
Our Price: $1.59
Designed for mounting National's #152 brackets. Phillips truss screws, 4 each of 7 x 1/2 and 7 x 1-1/2 inch. Visual-pack. Vinyl end cap provides protection from cut end of wire shelving that exposes possible rough edges. Large end caps cover the large rod, 0 gauge, .25"H x .4"W x .4"D. Small end caps are for the 4 gauge wire, .2"H x .2"W x .2"D. Designed to be used with ClosetMaid - Shelf & Rod shelving. SuperSlide shelving and hardware allows hangers to slide freely on both Fixed Mount and ShelfTrack mounting systems. Hangers slide without interruption. Snaps onto SuperSlide shelf to support hang rod. Use one every 36 in. of hang rod and at each end of shelf and hang rod. 5.75"H x 0.87"W x 3.87"D. Material: Resin
SCREW BRCKT BLACK 12PK        National Hardware V211S Bracket Screw PULL CABINET BRSH CHROME 3IN
Designed to attach National model No. 211 brackets to walls and shelves. 6 each No. 7 x 1-1/2" and 6 each No. 7 x 1/2" per pack. Visual-pack. National Hardware Bracket Screw, Series: V211S, NO 7 Screw, 1-1/4 in Length, 1/2 in Drive, Steel, White Solid brass wire pull with 3" center, 3.312" length x .375" width x 1.25" height. Use with two #8-32 x 1" type screws.
Amerock Allison BP803PW Wired Cabinet Pull Amerock Allison 253G10 Cabinet Pull Amerock Allison BP34163 Basic Modern Cabinet Pull
Pull with 3" center, 3-5/16" length x 3/8" width x 1-1/4" height. Use with two #8-32 x 1" type screws. Pull with 3" center, 4-7/8" length x 5/8" width x 1" height. Use with two #8-32 x 1" type screws. Pull with 3" center, 4" length x 7/16" width x 3/4" height. Use with two #8-32 x 1" type screws.
Amerock Allison BP341626 Basic Modern Cabinet Pull Amerock Allison BP3441BB Harmony Cabinet Pull Amerock Allison BP34413 Harmony Cabinet Pull
Pull with 3" center, 4" length x 7/16" width x 3/4" height. Use with two #8-32 x 1" type screws. Pull with 3" center, 3.375" length x 0.312" width x 1.125" height. Use with two #8-32 x 1" type screws. Pull with 3" center, 3.375" length x 0.312" width x 1.125" height. Use with two #8-32 x 1" type screws.
PULL 3IN 76MM SAT NICKEL      Mintcraft Traditional Classics SF843AB Center Ring Cabinet Pull Amerock Allison 253LB Cabinet Pull
3? Center-to-Center, 0.79? projection. 3"L - Polybagged. With screws. Pull with 3" center, 4-7/8" length x 5/8" width x 1" height. Use with two #8-32 x 1" type screws.
DRAWER PULL 96MM FLAT BLACK   Knape & Vogt CD-0242-PM Wall Mount Shelf Standard Amerock BP34173 Cabinet Hinge
Pull with 3-3/4" (96mm) center to center, 4-15/16? (125mm) L x 1/2? (13mm) W x 15/16? (24mm) H. Screw Size(s):  #8-32 x 1?L machine screw. Screw pack for heavyweight wall standard, (14) 2-1/2" Screws. Size:  2-3/4"L x 2-1/4"W x 3/8"H. Includes mounting hardware: (Size(s): #5 Oval Head Screw x 5/8"; #5 Flat Head Screw x 1/2")
SuperSlide 6609 Pre-Loaded Wall Bracket Mintcraft Traditional Classics SF816CH Pitcher Cabinet Pull Knape & Vogt 80-88D PWH Standard Shelf Screw
Heavy duty preloaded wall bracket with anchor, mounts to the side wall and holds the end of the SuperSlide shelf and Hang Rod. Supports front lip of shelving and hang rod where they meet the side wall. With pre-loaded pins. For drywall installations. 4.125"H x 1.75"W x 2"D. Material: Resin. 3"L - Polybagged. With screws. Screws are 1-1/2" long with a #8 body and #6 head.
Knape & Vogt 80-88DP ANO Standard Shelf Screw Closetmaid 6610 Wall Clip DRAWER PULL 4IN BRUSHED CHROME
Screws are 1-1/2" long with a #8 body and #6 head. Anchors shelf to wall. Ensures stability of shelf. Transitional style, 4-5/16? length, 5/16? width, 1-1/4? projection, 4? mounting hole.
Mintcraft CJ2115UF Decorative Cabinet Pull Mintcraft SF834PB Spoon Foot Cabinet Pull BRACKET SUPPORT SHOE SHELF WHT
Polybagged. With screws. 3"L - Polybagged. With screws. For wire shelving, converts almost any wire shelf to a shoe shelf. Make a shoe shelf by inverting shelf, lip facing up. Holds shoes away from wall at an angle. Use 1 shoe support bracket every 24 in. Does not work with Close Mesh shelving. 6.125"H x 1.25"W x 4.75"D.
Amerock Allison BP86526D Wired Cabinet Pull Amerock Allison 252PB Cabinet Pull SuperSlide 5655 Closet Rod Support
Solid brass wire pull with 3" center, 3.312" length x .375" width x 1.25" height. Use with two #8-32 x 1" type screws. Pull with 3" center, 5-1/2" length x 5/8" width x 1" height. Use with two #8-32 x 1" type screws. Converts shelf & rod shelving to a continous slide. Hang rod snaps into bracket to create an continuous slide for hangers. Snaps onto SuperSlide shelf to support hang rod. Use one every 36 in. (91,44cm) of hang rod and at each end of shelf and hang rod. 5.75"H x 0.87"W x 3.87"D. Material: Resin.
Closetmaid 1002 Joiner Plate Mintcraft Traditional Classics SF814PB Spoon Foot Cabinet Pull Mintcraft Traditional Classics SF816PB Pitcher Cabinet Pull
Use to join 2 shelves together to create a continuous run of shelving. Supports the joining of 2 wire shelves. One set consists of 2 joiner plates, 1 bolt and 1 nut. NOT for use with Close Mesh shelving. 1.19?H x 2.25?W x 1.13?D. Material: Resin. 3"L - Polybagged. With screws. 3"L - Polybagged. With screws.
Closetmaid 6620 Wall Bracket PULL 3-3/4IN 96MM SATIN NICKEL PULL 3-3/4IN OILRUB BRONZE
Heavy duty preloaded bracket with anchor easily mounts to the wall and holds the end of any size ClosetMaid shelf. Provides side wall support. Supports front lip of shelving where it meets the side wall. For drywall installations. Includes: 2.875"H x 2.125"W x 1.75"D. Material: Resin. Transitional style, metal finishes collection. 3-3/4 in (96 mm) center-to-center pull. Includes mounting hardware: (Size(s):#8-32 x 1in Truss Head Machine Screw). Transitional style, metal finishes collection. 3-3/4 in (96 mm) center-to-center pull. Includes mounting hardware: (Size(s):#8-32 x 1in Truss Head Machine Screw).
SuperSlide 6641 Wall Bracket DRAWER PULL 3IN SATIN NICKEL  Amerock BP341726 Semi-Concealed Cabinet Hinge
Supports low profile SuperSlide shelving in a wall to wall installation. Includes: 2 wall brackets, 4 pins and 4 anchors. Use in conjunction with support brackets and wall clips for installing wire shelving. Suports front lip of shelving where it meets the side wall. 2"H x 2.19W x 1.75"D. Material: Resin Transitional style pull with 3" center, 1-1/4" length x 5/8? width, 3-3/8" projection. Size:  2-3/4"L x 2-1/4"W x 3/8"H. Includes mounting hardware: (Size(s): #5 Oval Head Screw x 5/8"; #5 Flat Head Screw x 1/2")
Amerock Allison BP341526 Basic Modern Bail Cabinet Pull Mintcraft Traditional Classics SF809CH Cabinet Pull Knape & Vogt CD-0105 Phillips Flat Head Screw Pack
Pull with 2-3/4" center, 3-7/16" length x 3/4" width x 15/16" height. Use with two #8-32 x 1" type screws. 3"L - Polybagged. With screws. Durable zinc finish. Phillips flat head, 14 pack. Use with #0100 fast mount wall standards. Supports 200 Lbs. per screw.
Amerock Allison BP53470G10 Scroll Cabinet Pull Mintcraft Traditional Classics SF843BNI Center Ring Cabinet Pull Knape & Vogt CD-5934-WT Screw Set
Pull with 3" center, 3-13/16" length x 11/16" width x 1-1/4" height. Use with two #8-32 x 1" type screws. 3"L - Polybagged. With screws. Zinc clad for shelf and rod brackets. Contains: 2 each 1.5" x #10 screws for mounting bracket to wall and 2 each .75" x #8 screws for mounting shelf to bracket. Phillips head Screws.
Amerock Allison BP52994G10 Narrow Arch Cabinet Pull SuperSlide 75651 Closet Rod Connector Amerock Allison 937 Cabinet Pull
Transitional style pull, 3-3/4? (96mm) mounting holes. 1? projection, 4-3/16? overall length, 19/13? width. Use with two #8-32 x 1" type screws. Use with SuperSlide shelving to create uninterrupted sliding action around corners for walk-in closets. Keeps hangers from sliding off exposed ends. Support the connection of the two pieces of hang rod with a hang bar support. 2"H x 0.5"W x 0.5"D. Material: Plastic. Pull with 3" center, 3-1/2" length x 1/2" width x 1-1/8" height. Use with two #8-32 x 1" type screws.
Amerock Allison 245WPB Cabinet Pull Mintcraft Traditional Classics SF817CH Cabinet Pull Mintcraft Traditional Classics SF816BNI Pitcher Cabinet Pull
Metal pull with 3" center, 4-15/16" length x 3/4" width x 1-1/4" height. Use with two #8-32 x 1" type screws. White insert. 3"L - Polybagged. With screws. 3"L - Polybagged. With screws.
Amerock BP7603 Back Plate Mintcraft Traditional Classics SF820AN Spoon Foot Cabinet Pull PULL CUP BURNISHED BRASS 3IN
1-3/4" diameter x 3/16" height. 3"L - Polybagged. With screws. Pull with 3" center, 3-3/8" length x 1-1/4" width.
Closetmaid 1180 Support Bracket Mintcraft Traditional Classics SF814-10B Spoon Foot Cabinet Pull Amerock Allison 263WCH Cabinet Pull
Closetmaid Support Bracket, 12 in Length, 2 in Width, 2 in Depth, Steel, Epoxy Coated, White, Suitable For Use With: Wire Shelving, Includes: (1) Support Bracket, (1) Anchor, (1) NO 8 Pin 3"L - Polybagged. With screws. Metal pull with 3" center, 5" length x 3/4" width x 1-1/4" height. Use with two #8-32 x 1" type screws. White insert.
Mintcraft Traditional Classics SF817PB Cabinet Pull Closetmaid 1001 Corner Support Bracket Amerock Essential'Z BP26201G10 Arch Tip Cabinet Pull
3"L - Polybagged. With screws. Supports front lip of shelving to keep it level where it meets another shelf in a corner. Snap in place design. For corner installations.  0.375?H x 5?W x 0.75?D. Material: steel, coated with epoxy. Pull with 3" center, 5-1/4" length x 3/8" width x 1" height. Use with two #8-32 x 1" type screws.
Mintcraft Traditional Classics SF740PB Decorative Cabinet Pull Knape & Vogt CD-0047 Carded Screw and Cap Set Amerock Allison BP53470ORB Scroll Cabinet Pull
3"L - Polybagged. With screws. Mounts 2 brackets and 1 pole. Caps cover mounting screws. Carded. Pull with 3" center, 3-13/16" length x 11/16" width x 1-1/4" height. Use with two #8-32 x 1" type screws.
SCREW WOODGRAIN NO4X5/8IN     SCREW SILVER NO4X5/8IN        HINGE INSET 3/8IN SATIN NICKEL
SCREWS #4X5/8IN SILVER
Our Price: $3.82
5/8" x #4 screws. Visual-pack. 5/8" x #4 screws. Visual-pack. Size:  2-3/4"L x 2-1/4"W x 3/8"H. Includes mounting hardware: (Size(s): #5 Oval Head Screw x 5/8"; #5 Flat Head Screw x 1/2")
Amerock Allison BP735AE Chatsworth Arch Cabinet Pull Amerock Allison BP52995G10 Arch Tip Cabinet Pull Amerock Allison BP52996G10 Flat Arch Cabinet Pull
Pull with 3" center, 4-3/4" length x 3/4" width x 7/8" height. Use with two #8-32 x 1" type screws. Pull with 96mm center. Use with two #8-32 x 1" type screws. Pull with 96mm center. Use with two #8-32 x 1" type screws.
Amerock Anniversary BP874G9 Cabinet Pull Amerock Anniversary BP874BN Cabinet Pull Mintcraft Traditional Classics SF740AE Decorative Cabinet Pull
Pull with 3" center, 5" length x 1/2" width x 1-1/8" height. Use with two #8-32 x 1" type screws. Pull with 3" center, 5" length x 1/2" width x 1-1/8" height. Use with two #8-32 x 1" type screws. 3"L - Polybagged. With screws.
Mintcraft C202AB/OK Cabinet Pull HINGE INSET FACE-MNT ORB 3/8IN Amerock Allison BP53010G10 Cup Cabinet Pull
With oak handle center, easy to match any decor. 3"L - Polybagged. With screws. Size:  2-3/4"L x 2-1/4"W x 3/8"H. Includes mounting hardware: (Size(s): #5 Oval Head Screw x 5/8"; #5 Flat Head Screw x 1/2") Pull with 3" center, 3-3/8" length x 1-1/4" width.
Amerock Essential'Z BP19259G10 Open Arch Cabinet Pull Mintcraft C202PB/OK Cabinet Pull SuperSlide 75638 Closet Rod End Cap
Pull with 3" center, 4-1/2" length x 9/16" width x 1" height. Use with two #8-32 x 1" type screws. Protected by Guardian Lifetime finish. With oak handle center, easy to match any decor. 3"L - Polybagged. With screws. For use with ClosetMaid, SuperSlide wire shelving. Prevents hangers from sliding off end of closet hang rod. Insert into end of the hang rod.Two end caps per package. 0.5"H x 0.5"W x 0.5"D. Material: Resin.
Amerock Allison BP55222G10 Cabinet Pull Mintcraft C202CPW Spoon Foot Cabinet Pull Mintcraft Traditional Classics SF740BNI Decorative Cabinet Pull
Pull with 3" center.  3.6" length x 0.556" width. Use two #8 - 32 x 1" type screw. With white handle center, easy to match any decor. 3"L - Polybagged. With screws. 3"L - Polybagged. With screws.
Mintcraft CH-225 Decorative Overlay Cabinet Hinge Knape & Vogt 255-81N ZC Nail 8 in L Amerock Bar Pulls BP19010SS Cabinet Pull
3/8" hinge with screws. 2 pieces. For use with 255/233 zinc, 255 galvanized and 255 almond. Metal pull with 3" center to center, 5-1/3" length x 1/2" width x 1.34" height. Use with two #9-32 x 1" type screws.
Closetmaid 7561 U-Shape Shelf Clip DRAWER PULL 3IN SATIN NICKEL  DRAWER PULL 3IN OIL-RUB BRONZE
Attaches to the back of shelving to anchor shelf to back wall. Shelf clip "locks" shelving into place - attaching it at the top and bottom of shelf wire with or instead of wall clips. For concrete/stud and drywall installation. Material: Metal. Traditional style. Traditional style.
Amerock Inspirations BP1580WID Botanica Leaf Cabinet Pull Amerock BP19001SS Bow Cabinet Pull Closetmaid 26607 Support Bracket
Pull with 3" center, 5-5/8" length x 11/16" width x 1" height. Use with two #8-32 x 1" type screws. Protected by Guardian Lifetime finish. Pull with 3" center, 3-21/32" length x 3/8" width x 1-3/16" height. Use with two #8-32 x 1" type screws. Preloaded with #8 pin drive and anchors. No.6606, 71925 and No. 21775. - For Organizer, Wardrobe, SuperSlide and Close Mesh Shelves 12" in depth; and Wardrobe or hanging SuperSlide shelves 16" in depth. No. 26607, 71924, and No.21776 - For Organizer, SuperSlide (in storage application), and Close Mesh shelves 16" in depth. No.26605 - For Organizer, Wardrobe, SuperSlide and Close Mesh Shelves 20" in depth.
Amerock Inspirations BP1580R2 Botanica Leaf Cabinet Pull Amerock Revitalize BP55343ORB Cabinet Pull Amerock Inspirations BP1590WID Plain Cabinet Pull
Pull with 3" center, 5-5/8" length x 11/16" width x 1" height. Use with two #8-32 x 1" type screws. Protected by Guardian Lifetime finish. 3-5/8" length x 5/8" width x 1-5/16" height. Use two #8 - 32 x 1" type screw. Metal pull with 3" center, 5.625" length x 0.688" width x 1" height. Use with two #8-32 x 1" type screws.
Mintcraft CH-222 Decorative Overlay Cabinet Hinge Mintcraft CH-224 Decorative Overlay Cabinet Hinge DRAWER PULL 3IN ELEGANT BRASS
3/8" hinge with screws. 2 pieces. 3/8" hinge with screws. 2 pieces. Pull with 3" center, 5-5/8" length x 11/16" width x 1" height. Use with two #8-32 x 1" type screws. Protected by Guardian Lifetime finish.
Mintcraft CH-080 Wrap Around Cabinet Hinge Amerock Inspirations BP1590G10 Plain Cabinet Pull Amerock Allison BP176CAE Cabinet Pull
2 pieces with screws. Metal pull with 3" center, 5.625" length x 0.688" width x 1" height. Use with two #8-32 x 1" type screws. Pull with back plate and 3" center, 5-9/16" length x 1" width x 1-1/4" height. Use with two #8-32 x 1" type screws.
Closetmaid 7546 Down Clip/Anchor Amerock Inspirations BP1590ORB Plain Cabinet Pull Amerock Revitalize BP55343G10 Cabinet Pull
Attaches to the back of shelving to anchor shelf to back wall. For concrete/stud and drywall installation. Package includes 12 clips, 12 anchors and 12 #8 screws. Metal pull with 3" center, 5.625" length x 0.688" width x 1" height. Use with two #8-32 x 1" type screws. 3-5/8" length x 5/8" width x 1-5/16" height. Use two #8 - 32 x 1" type screw.
Mintcraft CH-180 Decorative Cabinet Hinge Closetmaid 7540 Small End Cap Closetmaid 26605 Support Bracket
3/8" hinge with screws. 2 pieces. Vinyl end cap provides protection from cut end of wire shelving that exposes possible rough edges. Large end caps cover the large rod, 0 gauge, .25"H x .4"W x .4"D. Small end caps are for the 4 gauge wire, .2"H x .2"W x .2"D. Designed to be used with ClosetMaid - Shelf & Rod shelving. Preloaded with #8 pin drive and anchors. No.6606, 71925 and No. 21775. - For Organizer, Wardrobe, SuperSlide and Close Mesh Shelves 12" in depth; and Wardrobe or hanging SuperSlide shelves 16" in depth. No. 26607, 71924, and No.21776 - For Organizer, SuperSlide (in storage application), and Close Mesh shelves 16" in depth. No.26605 - For Organizer, Wardrobe, SuperSlide and Close Mesh Shelves 20" in depth.
Amerock Mulholland BP53030ORB Square Cabinet Pull Amerock Kane BP53702G10 Transitional Cabinet Pull Knape & Vogt 255 Pilaster Nail
Pull with 3" center. 3-3/4" length x 3/4" width x 1-1/8" height. Use with two #8-32 x 1" type screws. 4-1/2" length x 3/4" width x 1-1/8" height. Use two #8-32 x 1" type screws. For use with 255/233 zinc, 255 galvanized and 255 almond.
Amerock Inspirations BP1584ORB Rope Cabinet Pull Amerock Mulholland BP53030G10 Square Cabinet Pull Closetmaid 6606 Support Bracket
Pull with 3" center, 4-1/8" length x 7/16" width x 1-1/4" height. Use with two #8-32 x 1" type screws. Protected by Guardian Lifetime finish. Pull with 3" center. 3-3/4" length x 3/4" width x 1-1/8" height. Use with two #8-32 x 1" type screws. Preloaded with #8 pin drive and anchors. No.6606, 71925 and No. 21775. - For Organizer, Wardrobe, SuperSlide and Close Mesh Shelves 12" in depth; and Wardrobe or hanging SuperSlide shelves 16" in depth. No. 26607, 71924, and No.21776 - For Organizer, SuperSlide (in storage application), and Close Mesh shelves 16" in depth. No.26605 - For Organizer, Wardrobe, SuperSlide and Close Mesh Shelves 20" in depth.
Amerock Brass and Sterling Traditions BP1300ORB Traditional Cabinet Pull National Hardware V552 Flush/Full Inset Back Flap Hinge Amerock Essential'Z BP9365G10 Cup Cabinet Pull
Metal pull with 3" center, 1.0625" height. Use with two #8-32 x 1" type screws. National Hardware Back Flap Hinge, Flush/Full Inset, Series: V552, 0.075 in Leaf Thickness, 1-1/2 in Door Leaf Length, 1-1/2 in Frame Leaf Length, Removable Pin, Surface, Wall Mounting, Fasteners: Screws, 3.482 in Overall Width, Hot Rolled Steel, Zinc Plated, For Residential Applications Pull with 2-1/2" center, 4-1/8" length x 1" width x 1" height. Use with two #8-32 x 1" type screws. Protected by Guardian Lifetime finish.
Amerock Bar Pulls BP40515ORB Transitional Cabinet Pull SuperSlide 25633 Corner Corner Round Bar Knape & Vogt 82DPSCREWZC Screw Kit
Pull with 3" center, 5-3/8" length x 1/2" width x 1-3/8" height. Use with two #8-32 x 1" type screws. Use with SuperSlide shelving to create uninterrupted sliding action around corners for walk-in closets. Tapered ends slide easily into ClosetMaid, SuperSlide hang rods. Support connection of hang rod with a Hang Bar Support. 0.75?H x 10.25?W x 10.25?DMaterial: Epoxy coated steel. For installation of 82 series heavy-duty standards. Includes: 6 heavy-duty screws and 6 wall anchors.
Amerock Essential'Z BP9362G10 Subtle Arch Cabinet Pull National Hardware V550 Flush/Full Inset Chest Hinge HINGE CHEST BRASS 1-1/2X3/4IN
Pull with 5" center, 7-3/16" length x 1/2" width x 1-1/4" height. Use with two #8-32 x 1" type screws. Protected by Guardian Lifetime finish. National Hardware Chest Hinge, Flush/Full Inset, Series: V550, 8 Holes, 0.2 in Hole Diameter, 0.08 in Leaf Thickness, 1-1/2 in Door Leaf Length, 1-1/2 in Frame Leaf Length, Removable Pin, 0.12 in Diameter Pin, Wall Mounting, 15 lb Load Capacity, 1.6 in Overall Length, 3.21 in Overall Width, Hot Rolled Steel, Zinc Plated National Hardware Chest Hinge, Series: V550, 8 Holes, 0.2 in Hole Diameter, 0.08 in Leaf Thickness, 3/4 in Frame Leaf Width, Tight Pin, 0.12 in Dia Pin, 15 lb Load Capacity, 3.21 in Overall Length, 1-1/2 in Overall Width, Hot Rolled Steel, Brass, For Chests, Cabinets and Storages Boxes
Knape & Vogt 255 Pilaster Nail National Hardware V552 Flush/Full Inset Back Flap Hinge SuperSlide 2058 Closet Rod
For use with 255/233 zinc, 255 galvanized and 255 almond. National Hardware Back Flap Hinge, Flush/Full Inset, Series: V552, 0.23 in Hole Diameter, 0.07 in Leaf Thickness, 2 in Door Leaf Length, 2 in Frame Leaf Length, Removable Pin, 0.19 in Diameter Pin, Surface, Wall Mounting, Fasteners: Screws, 2.11 in Overall Length, 5.38 in Overall Width, Hot Rolled Steel, Zinc Plated, For Residential Applications Snaps into the Closet Rod Support to allow hangers to slide without interruption. Can be cut to customize length . Holds up to 30lbs per foot. Material: Epoxy coated steel.
HINGE INSET 3/8IN SATIN NICKEL PULL 3IN 76MM POLISH CHROME   Amerock Allison TEN174G10 Cabinet Pull Set
Size:  2-3/4"L x 2-1/4"W x 3/8"H. Includes mounting hardware: (Size(s): #5 Oval Head Screw x 5/8"; #5 Flat Head Screw x 1/2") Pull with 3" center, 4" length x 7/16" width x 3/4" height. Use with two #8-32 x 1" type screws. Transitional style pull with 3" center,  4-1/2 length  x 5/8" width  x 1" height. Use with two #8-32 x 1" type screws.
Closetmaid 7556 U Clip PULL 3IN 76MM POLISHED BRASS  Closetmaid 1770 Back Wall Clip
Attaches to the back of shelving to anchor shelf to back wall. Shelf clip "locks" shelving into place - attaching it at the top and bottom of shelf wire with or instead of wall clips. For concrete/stud and drywall installation. Material: Metal. Pull with 3" center, 3.375" length x 0.312" width x 1.125" height. Use with two #8-32 x 1" type screws. Anchors shelf to wall. Ensures stability of shelf.
SuperSlide 1741 Wall Bracket Closetmaid 21782 Shelf End Wall Bracket PULL 3IN 76MM SATIN NICKEL
Supports low profile SuperSlide shelving in a wall to wall installation. Includes: 2 wall brackets, 4 pins and 4 anchors. Use in conjunction with support brackets and wall clips for installing wire shelving. Suports front lip of shelving where it meets the side wall. 2"H x 2.19W x 1.75"D. Material: Resin Heavy duty preloaded bracket with anchor easily mounts to the wall and holds the end of any size ClosetMaid shelf. Provides side wall support. Supports front lip of shelving where it meets the side wall. For drywall installations. Includes: 2.875"H x 2.125"W x 1.75"D. Material: Resin. Pull with 3" center, 5-1/16" length x 5/8" width x 1" height. Use with two #8-32 x 1" type screws.
Closetmaid 1009 Shelf Support Pole PULL 3IN 76MM SATIN NICKEL    PULL 3IN 76MM OILRUB BRONZE
Use in place of support brackets when stacking 2 or more shelves. Pre-drilled holes for easy shelf location. Includes: 2 pole pieces (43 in. each) 1 pole joiner, 2 pole caps, and hardware. Material: Epoxy coated steel. Pull with 3" center, 4" length x 7/16" width x 3/4" height. Use with two #8-32 x 1" type screws. 3? Center-to-center. 1-1/4? projection, 3-3/8? length, 1/2? width.
Amerock Allison TEN53003G10 Cabinet Pull Set PULL 3-3/4IN OILRUB BRONZE    PULL 3-3/4IN 96MM SATIN NICKEL
Transitional style, metal finishes collection. 3-3/4 in (96 mm) center-to-center pull. Includes mounting hardware: (Size(s):#8-32 x 1in Truss Head Machine Screw). Transitional style, metal finishes collection. 3-3/4 in (96 mm) center-to-center pull. Includes mounting hardware: (Size(s):#8-32 x 1in Truss Head Machine Screw). Transitional style pull, 3-3/4? (96mm) mounting holes. 1? projection, 4-3/16? overall length, 19/13? width. Use with two #8-32 x 1" type screws.
Amerock Allison TEN174ORB Cabinet Pull Set Amerock Essential'Z TEN26201G10 Cabinet Pull Set ShelfTrack 21775 Shelf Bracket
Transitional style pull with 3" center,  4-1/2 length  x 5/8" width  x 1" height. Use with two #8-32 x 1" type screws. Pull with 3" center, 5-1/4" length x 3/8" width x 1" height. Use with two #8-32 x 1" type screws. Preloaded with #8 pin drive and anchors. No.6606, 71925 and No. 21775. - For Organizer, Wardrobe, SuperSlide and Close Mesh Shelves 12" in depth; and Wardrobe or hanging SuperSlide shelves 16" in depth. No. 26607, 71924, and No.21776 - For Organizer, SuperSlide (in storage application), and Close Mesh shelves 16" in depth. No.26605 - For Organizer, Wardrobe, SuperSlide and Close Mesh Shelves 20" in depth.
ShelfTrack 21776 Shelf Bracket SuperSlide 4714 Wire Shelf Closetmaid 2876 Mounting Hardware
Preloaded with #8 pin drive and anchors. No.6606, 71925 and No. 21775. - For Organizer, Wardrobe, SuperSlide and Close Mesh Shelves 12" in depth; and Wardrobe or hanging SuperSlide shelves 16" in depth. No. 26607, 71924, and No.21776 - For Organizer, SuperSlide (in storage application), and Close Mesh shelves 16" in depth. No.26605 - For Organizer, Wardrobe, SuperSlide and Close Mesh Shelves 20" in depth. Durable vinyl coated steel rods. All purpose storage shelf. 1" deep. Screws and anchors for installing ShelfTrack Hang Track and Standards into wall studs or concrete. Contains: Ten #12 x 2" pan head screws with anchors.
ShelfTrack 2877 Wall Anchor Knape & Vogt 80-88DP BLK Screw and Anchor SuperSlide 4717 Wire Shelf
Toggle bolts for installing ShelfTrack Hang Track and Standards into hollow walls, drywall/plaster. Contains: Five 3/16" x 3" hollow wall anchors. Screws are 1-1/2" long with a #8 body and #6 head. Durable vinyl coated steel rods. All purpose storage shelf. 1" deep.
SuperSlide 2057 Closet Rod Closetmaid 1361 Wardrobe Shelf Closetmaid 6222 Hang Basket
Snaps into the Closet Rod Support to allow hangers to slide without interruption. Can be cut to customize length . Holds up to 30lbs per foot. Material: Epoxy coated steel. Sturdy ventilated vinyl coated steel wire construction. Economical Shelf & Rod shelving provides shelf and hanging space for bedroom, laundry or where extra space is needed. No need to purchase a hang rod, it is constructed into the shelving unit. Support brackets and wall anchors sold separately. 17 in. wide hanging basket instantly creates additional storage. Hang multiple baskets. This sturdy wire bin does not need additional hardware; hooks directly to shelf. Perfect to use under the 24 in. or wider wire shelves. Fits any wire shelving. Material: Epoxy coated steel.
SuperSlide 4735 Linen Organizer Wire Shelf Closetmaid 21066 Shelf and Rod Corner Kit Closetmaid 1363 Wardrobe Shelf
Ventilated design keeps clothing and linens fresh. Add SuperSlide hardware components to convert to a hanging shelf where hangers slide continuously. Use SuperSlide shelf by itself for storage. Install shelf inverted with lip up to create shoe shelf. Sturdy vinyl coated steel wire construction. By installing in corner with shelves connecting, this shelf creates a usable corner so that hangers continue around corner. Installation hardware for corner shelf included. Shelving sold separately. Steel coated with vinyl. Sturdy ventilated vinyl coated steel wire construction. Economical Shelf & Rod shelving provides shelf and hanging space for bedroom, laundry or where extra space is needed. No need to purchase a hang rod, it is constructed into the shelving unit. Support brackets and wall anchors sold separately.
SuperSlide 4719 Wire Shelf Closetmaid 8279 Laundry Shelf Closetmaid 1078 Shelf and Rod Wire Shelf
Ventilated design keeps clothing and linens fresh. Add SuperSlide hardware components to convert to a hanging shelf where hangers slide continuously. Use SuperSlide shelf by itself for storage. Install shelf inverted with lip up to create shoe shelf. Sturdy vinyl coated steel wire construction. Ventilated wire shelf with space for hangers. Wire spacing provides storage for small items or books. Installation hardware included. Material: Epoxy coated steel. Sturdy ventilated vinyl coated steel wire construction. Economical Shelf & Rod shelving provides shelf and hanging space for bedroom, laundry or where extra space is needed. No need to purchase a hang rod, it is constructed into the shelving unit. Support brackets and wall anchors sold separately.
Closetmaid 37300 Wardrobe Shelf Closetmaid 1395 Close Mesh Wire Shelf Closetmaid 21067 Corner Shelf Kit
Sturdy ventilated vinyl coated steel wire construction. Economical Shelf & Rod shelving provides shelf and hanging space for bedroom, laundry or where extra space is needed. No need to purchase a hang rod, it is constructed into the shelving unit. Support brackets and wall anchors sold separately. Sturdy vinyl coated steel wire construction.Wires are spaced 5/8 in. apart versus the 1 in. on our other wire shelving. Keeps small items in the pantry from tipping over. Install with the ShelfTrack system and create a fully adjustable pantry. Installation hardware sold separately. Can be cut to custom lengths. By installing in corner with shelves connecting, this shelf creates a usable corner so that hangers continue around corner. Installation hardware for corner shelf included. Shelving sold separately. Steel coated with vinyl.
Closetmaid 3731021 Shelf Liner Closetmaid 77545 Shelf End Cap Closetmaid 1396 Close Mesh Wire Shelf
Ventilated design keeps clothing and linens fresh. Add SuperSlide hardware components to convert to a hanging shelf where hangers slide continuously. Use SuperSlide shelf by itself for storage. Install shelf inverted with lip up to create shoe shelf. Sturdy vinyl coated steel wire construction. These end caps cover both ends of 0 gauge wire of ClosetMaid - Shelf & Rod ventilated shelving. End caps keep hangers from sliding off exposed ends. 0.5"H x 2"W x 0.5"D Sturdy vinyl coated steel wire construction.Wires are spaced 5/8 in. apart versus the 1 in. on our other wire shelving. Keeps small items in the pantry from tipping over. Install with the ShelfTrack system and create a fully adjustable pantry. Installation hardware sold separately. Can be cut to custom lengths.
SuperSlide 4737 Linen Wire Shelf Closetmaid 3732521 Linen Shelf Closetmaid 37305 Wardrobe Shelf
Durable vinyl coated steel rods. All purpose storage shelf. 1" deep. Ventilated design keeps clothing and linens fresh. Add SuperSlide hardware components to convert to a hanging shelf where hangers slide continuously. Use SuperSlide shelf by itself for storage. Install shelf inverted with lip up to create shoe shelf. Sturdy vinyl coated steel wire construction. Sturdy ventilated vinyl coated steel wire construction. Economical Shelf & Rod shelving provides shelf and hanging space for bedroom, laundry or where extra space is needed. No need to purchase a hang rod, it is constructed into the shelving unit. Support brackets and wall anchors sold separately.
Closetmaid 37402 Close Mesh Wire Shelf Closetmaid 1103 Support Bracket Closetmaid 1164XBJ Support Bracket
Sturdy vinyl coated steel wire construction.Wires are spaced 5/8 in. apart versus the 1 in. on our other wire shelving. Keeps small items in the pantry from tipping over. Install with the ShelfTrack system and create a fully adjustable pantry. Installation hardware sold separately. Can be cut to custom lengths. No. 103: Use with 10", 12" and 16" Shelf & Rod, and 12" Linen. No. 106: For Linen shelves 16" in depth.  Bulk pack. Closetmaid Support Bracket, 12 in Length, 2 in Width, 2 in Depth, Steel, Epoxy Coated, White, Suitable For Use With: Wire Shelving, Includes: (2) Brackets, (2) Anchors, (2) NO 8 Pins
Closetmaid 37318 Close Mesh Wire Shelf Closetmaid 1166 Support Bracket Closetmaid 932 Pre-Loaded End Bracket
Sturdy vinyl coated steel wire construction.Wires are spaced 5/8 in. apart versus the 1 in. on our other wire shelving. Keeps small items in the pantry from tipping over. Install with the ShelfTrack system and create a fully adjustable pantry. Installation hardware sold separately. Can be cut to custom lengths. Closetmaid Support Bracket, 16 in Length, 2 in Width, 2 in Depth, Steel, Epoxy Coated, White, Suitable For Use With: Wire Shelving, Secures shelf to side wall of closet. Pre-loaded with pins and anchors, no screws needed. Accommodates pole clips and shelf stops in "TotalSlide" system.
Closetmaid 35913 Total Slide Shelf Closetmaid 37403 Close Mesh Wire Shelf SuperSlide 35917 Total Slide Shelf
Continuous slide all-in-one shelf and rod solution. Sturdy vinyl coated steel wire construction.Wires are spaced 5/8 in. apart versus the 1 in. on our other wire shelving. Keeps small items in the pantry from tipping over. Install with the ShelfTrack system and create a fully adjustable pantry. Installation hardware sold separately. Can be cut to custom lengths. Continuous slide all-in-one shelf and rod solution.
   
 
1