Home > HARDWARE > GENERAL HARDWARE > SHELVING & CLOSET > SHELF STANDARDS
Sort By:
1
SUPPORT WHITE                 National Hardware N116-475 Shelf Support SUPPORT BRASS
SUPPORTS BRONZE
Our Price: $0.38
Used to support shelves. 1/4" diameter shank. Safe working load 25 lbs. Boxed loose. National Hardware Shelf Support, Series: 158, 0.62 in Width, 0.05 in Thickness, Steel, Bronze, 25 lb Load Capacity, Suitable For Use With: National 157 Shelf Standards, 0.14 in Hole Diameter, For Supporting Shelves Used to support shelves. Can be used with National 157 shelf standards. Safe working load 25 lbs. Boxed loose.
National Hardware N224-675 Shelf Support Amerock Allison BP3401CB Cabinet Pull Stanley 218941 Utility Shelf Bracket
SUPPORTS BRASS
Our Price: $0.41
National Hardware Shelf Support, Series: 159, 1/4 in Shank Diameter, 1.22 in Length, 1/2 in Width, 0.05 in Thickness, Steel, Brass, 25 lb Load Capacity, 0.16 in Hole Diameter, For Supporting Shelves Pull with 3-1/4" center, 5-1/16" length x 1" width x 3/4" height. Use with two #8-32 x 1" type screws. Can be used as a support or brace. Strengths exceed ANSI/BHMA standards. Brackets are designed for use with standard dimensional lumber. First measurement indicates nominal width of shelf leg; second measurement denotes nominal length of wall leg. Bulk pak.
National Hardware 110BC Shelf Bracket Amerock Allison 894ABS Cabinet Pull PULL CABINET BRSH CHROME 3IN
National Hardware Shelf Bracket, Series: 110BC, 4 in Length, 1.37 in Width, 3 in Depth, Steel, Zinc Plated, 10 lb Load Capacity, Suitable For Use With: National 110 Shelf Brackets, Includes: (12) No 7 x 3/4 in and 1-1/4 in Screws Pull with 3" center, 4-5/16" length x 7/8" height. Use with two #8-32 x 1" type screws. Solid brass wire pull with 3" center, 3.312" length x .375" width x 1.25" height. Use with two #8-32 x 1" type screws.
Amerock Allison BP803PW Wired Cabinet Pull Amerock Allison 253G10 Cabinet Pull National Hardware 110BC Shelf Bracket
Pull with 3" center, 3-5/16" length x 3/8" width x 1-1/4" height. Use with two #8-32 x 1" type screws. Pull with 3" center, 4-7/8" length x 5/8" width x 1" height. Use with two #8-32 x 1" type screws. National Hardware Shelf Bracket, Series: 110BC, 5 in Length, 1.34 in Width, 4 in Depth, Steel, Zinc Plated, 10 lb Load Capacity, Suitable For Use With: National 110 Shelf Brackets, Includes: (12) No 7 x 3/4 in and 1-1/4 in Screws
Amerock Allison BP34163 Basic Modern Cabinet Pull Amerock Allison BP341626 Basic Modern Cabinet Pull Amerock Allison BP3441BB Harmony Cabinet Pull
Pull with 3" center, 4" length x 7/16" width x 3/4" height. Use with two #8-32 x 1" type screws. Pull with 3" center, 4" length x 7/16" width x 3/4" height. Use with two #8-32 x 1" type screws. Pull with 3" center, 3.375" length x 0.312" width x 1.125" height. Use with two #8-32 x 1" type screws.
Amerock Allison BP34413 Harmony Cabinet Pull PULL 3IN 76MM SAT NICKEL      Knape & Vogt 255 Adjustable Shelf Standard
Pull with 3" center, 3.375" length x 0.312" width x 1.125" height. Use with two #8-32 x 1" type screws. 3? Center-to-Center, 0.79? projection. Pilasters for built-in shelving and book case applications. Adjustable on 1/2" centers. 23 gauge high-strength steel, 5/8" wide x 3/16" deep.
Amerock Allison 253LB Cabinet Pull DRAWER PULL 96MM FLAT BLACK   National Hardware 110BC Shelf Bracket
Pull with 3" center, 4-7/8" length x 5/8" width x 1" height. Use with two #8-32 x 1" type screws. Pull with 3-3/4" (96mm) center to center, 4-15/16? (125mm) L x 1/2? (13mm) W x 15/16? (24mm) H. Screw Size(s):  #8-32 x 1?L machine screw. National Hardware Shelf Bracket, Series: 110BC, 6 in Length, 1.4 in Width, 5 in Depth, Steel, Zinc Plated, 25 lb Load Capacity, Suitable For Use With: National 110 Shelf Brackets, Includes: (12) No 7 x 3/4 in and 1-1/4 in Screws
Knape & Vogt PK255 BR 36 Standard Pilaster Prime Line U 9335 Spoon Shelf Support Peg DRAWER PULL 4IN BRUSHED CHROME
Pilasters for built-in shelving and book case applications. Adjustable on 1/2" centers. 23 gauge high-strength steel, 5/8" wide x 3/16" deep. For use with cabinets and storage cabinets with glass shelves. Transitional style, 4-5/16? length, 5/16? width, 1-1/4? projection, 4? mounting hole.
Amerock Allison BP86526D Wired Cabinet Pull Amerock Allison 252PB Cabinet Pull Knape & Vogt 255 Standard Pilaster
Solid brass wire pull with 3" center, 3.312" length x .375" width x 1.25" height. Use with two #8-32 x 1" type screws. Pull with 3" center, 5-1/2" length x 5/8" width x 1" height. Use with two #8-32 x 1" type screws. Pilasters for built-in shelving and book case applications. Adjustable on 1/2" centers. 23 gauge high-strength steel, 5/8" wide x 3/16" deep.
Amerock BP34173 Cabinet Hinge Knape & Vogt 255 Standard Pilaster Mintcraft 25211PHL Single Slot Shelf Standard
Size:  2-3/4"L x 2-1/4"W x 3/8"H. Includes mounting hardware: (Size(s): #5 Oval Head Screw x 5/8"; #5 Flat Head Screw x 1/2") Pilasters for built-in shelving and book case applications. Adjustable on 1/2" centers. 23 gauge high-strength steel, 5/8" wide x 3/16" deep. Single track adjustable wall standard. Dimensions: 5/8"W x 7/16"H x selected length. For use with Pro Source shelving. UPC tagged.
Knape & Vogt PK255 BR 48 Standard Pilaster PULL 3-3/4IN 96MM SATIN NICKEL PULL 3-3/4IN OILRUB BRONZE
Pilasters for built-in shelving and book case applications. Adjustable on 1/2" centers. 23 gauge high-strength steel, 5/8" wide x 3/16" deep. Transitional style, metal finishes collection. 3-3/4 in (96 mm) center-to-center pull. Includes mounting hardware: (Size(s):#8-32 x 1in Truss Head Machine Screw). Transitional style, metal finishes collection. 3-3/4 in (96 mm) center-to-center pull. Includes mounting hardware: (Size(s):#8-32 x 1in Truss Head Machine Screw).
Knape & Vogt 255 Adjustable Shelf Standard Knape & Vogt 255 Standard Pilaster DRAWER PULL 3IN SATIN NICKEL
Pilasters for built-in shelving and book case applications. Adjustable on 1/2" centers. 23 gauge high-strength steel, 5/8" wide x 3/16" deep. Pilasters for built-in shelving and book case applications. Adjustable on 1/2" centers. 23 gauge high-strength steel, 5/8" wide x 3/16" deep. Transitional style pull with 3" center, 1-1/4" length x 5/8? width, 3-3/8" projection.
Prime Line U 9337 Spoon Shelf Support Peg Knape & Vogt 255 Adjustable Shelf Standard Amerock Allison BP341526 Basic Modern Bail Cabinet Pull
For use with cabinets and storage cabinets with glass shelves. Pilasters for built-in shelving and book case applications. Adjustable on 1/2" centers. 23 gauge high-strength steel, 5/8" wide x 3/16" deep. Pull with 2-3/4" center, 3-7/16" length x 3/4" width x 15/16" height. Use with two #8-32 x 1" type screws.
SUPPORT WHITE                 Amerock Allison BP53470G10 Scroll Cabinet Pull Slim-Line 215 Decorative Regular Duty Shelf L-Bracket
Used to support shelves. 1/4" diameter shank. Safe working load 25 lbs. Boxed loose. Pull with 3" center, 3-13/16" length x 11/16" width x 1-1/4" height. Use with two #8-32 x 1" type screws. Made of heavy-duty steel covered with high-impact plastic. Italian design. Functional and attractive.
Knape & Vogt CD-0106 Joist Bracket Prime Line U 9360 Shelf Support Peg Knape & Vogt CD-0104 Fast Mount Hook
Durable, use to install fast mount wall standards over finish wall without fastening wall standard to wall. Fastens to stud wall header plate. Use with #0100 fast mount wall standards. Supports 600 Lbs. Per Bracket. Mini-style frequently used in stereo and display cabinets. 1/2"D support, 5mm OD x 3/8"L peg. 12 lbs. per peg maximum safe-weight load. Hook hangs fast-mount track from top of basement wall. No screws required. Load tested up to 1,000 lbs per hook.
Amerock Allison BP52994G10 Narrow Arch Cabinet Pull Knape & Vogt 82 WH 16.5 Shelf Standard Knape & Vogt 80 BLK 24 Regular Duty Single Slot Shelf Standard
Transitional style pull, 3-3/4? (96mm) mounting holes. 1? projection, 4-3/16? overall length, 19/13? width. Use with two #8-32 x 1" type screws. Features twice the slots for more strength. Two 10-1/2" brackets mounted to twin-slotted standards support up to 300 pounds per shelf when installed according to manufacturer's directions. For use with the 180 Series brackets. Standards can be mounted to nearly any type of wall. Reinforced brackets lock into slotted standard for strong, secure weight-bearing support. Fully adjustable 1" increments. 16-gauge steel construction. Dimension 5/8" wide x 13/32" high x selected length.
Knape & Vogt 256PZC Adjustable Pilaster Shelf Support Hy-Ko ST-1 Water Resistant Number and Symbol Stencil Set Prime Line U 9116 Spoon Shelf Support Peg
Snaps securely into place. For use with No. 233 and No. 255. High strength steel. Reusable, flexible, heavy-duty and water-resistant. Includes letters A to Z, numbers 1-0, plus one extra A, E, O, R, S and symbols (period, dash, comma, &, $ and cents). Blister Card. For use with cabinets and storage cabinets with glass shelves.
Prime Line U 9150 Spoon Shelf Support Peg Amerock Allison 245WPB Cabinet Pull Amerock BP341726 Semi-Concealed Cabinet Hinge
For use with cabinets and storage cabinets with glass shelves. Metal pull with 3" center, 4-15/16" length x 3/4" width x 1-1/4" height. Use with two #8-32 x 1" type screws. White insert. Size:  2-3/4"L x 2-1/4"W x 3/8"H. Includes mounting hardware: (Size(s): #5 Oval Head Screw x 5/8"; #5 Flat Head Screw x 1/2")
Amerock BP7603 Back Plate Prime Line U 9147 Shelf Support Peg SUPPORT ZINC PLATED
1-3/4" diameter x 3/16" height. 1/4" diameter peg and support a maximum safe load of 5 lb. Used to support cabinet shelves. Used to support shelves. 1/4" diameter shank. Safe working load 25 lbs. Visual-pack.
SUPPORT BRONZE                Knape & Vogt 335P PLAS Shelf Support Pin PULL CUP BURNISHED BRASS 3IN
Used to support shelves. Can be used with National 157 shelf standards. Safe working load: 70 lbs. Visual-pack. 1/4" diameter x 7/16"L pin. Polybagged. Pull with 3" center, 3-3/8" length x 1-1/4" width.
Amerock Allison 937 Cabinet Pull National Hardware 110BC Shelf Bracket Amerock Allison 263WCH Cabinet Pull
Pull with 3" center, 3-1/2" length x 1/2" width x 1-1/8" height. Use with two #8-32 x 1" type screws. National Hardware Shelf Bracket, Series: 110BC, 8 in Length, 1.56 in Width, 6 in Depth, Steel, Zinc Plated, 25 lb Load Capacity, Suitable For Use With: National 110 Shelf Brackets, Includes: (12) No 7 x 3/4 in and 1-1/4 in Screws Metal pull with 3" center, 5" length x 3/4" width x 1-1/4" height. Use with two #8-32 x 1" type screws. White insert.
Knape & Vogt PK255 ZC 60 Standard Pilaster Prime Line U 9302 Shelf Support Peg Knape & Vogt PK255 BR 72 Standard Pilaster
Pilasters for built-in shelving and book case applications. Adjustable on 1/2" centers. 23 gauge high-strength steel, 5/8" wide x 3/16" deep. 3mm diameter peg and support a maximum safe load of 10 lb. Used to support cabinet shelves. Pilasters for built-in shelving and book case applications. Adjustable on 1/2" centers. 23 gauge high-strength steel, 5/8" wide x 3/16" deep.
Knape & Vogt 255 Standard Pilaster Mintcraft 25212PHL Single Slot Shelf Standard Knape & Vogt 255 Standard Pilaster
Pilasters for built-in shelving and book case applications. Adjustable on 1/2" centers. 23 gauge high-strength steel, 5/8" wide x 3/16" deep. Single track adjustable wall standard. Dimensions: 5/8"W x 7/16"H x selected length. For use with Pro Source shelving. UPC tagged. Pilasters for built-in shelving and book case applications. Adjustable on 1/2" centers. 23 gauge high-strength steel, 5/8" wide x 3/16" deep.
Amerock Essential'Z BP26201G10 Arch Tip Cabinet Pull Amerock Allison BP53470ORB Scroll Cabinet Pull Knape & Vogt RP-0046-WT Shelf and Rod Bracket
Pull with 3" center, 5-1/4" length x 3/8" width x 1" height. Use with two #8-32 x 1" type screws. Pull with 3" center, 3-13/16" length x 11/16" width x 1-1/4" height. Use with two #8-32 x 1" type screws. Holds up to 500 lb. per pair.  For 12" deep shelf.
SHELF STANDARD SILVER 4FT     Slim-Line 215 Decorative Regular Duty Shelf L-Bracket Amerock Allison BP735AE Chatsworth Arch Cabinet Pull
Mounts to the wall for surface or flush mounted applications. Predrilled nail and screw holes. Use with 158 Shelf Supports. 5/8" Wide, 3/16" Deep. Boxed loose barcoded. Made of heavy-duty steel covered with high-impact plastic. Italian design. Functional and attractive. Pull with 3" center, 4-3/4" length x 3/4" width x 7/8" height. Use with two #8-32 x 1" type screws.
Amerock Allison BP52995G10 Arch Tip Cabinet Pull Amerock Allison BP52996G10 Flat Arch Cabinet Pull Amerock Anniversary BP874G9 Cabinet Pull
Pull with 96mm center. Use with two #8-32 x 1" type screws. Pull with 96mm center. Use with two #8-32 x 1" type screws. Pull with 3" center, 5" length x 1/2" width x 1-1/8" height. Use with two #8-32 x 1" type screws.
Amerock Anniversary BP874BN Cabinet Pull Hy-Ko ST-2 Water Resistant Number and Symbol Stencil Set HINGE INSET FACE-MNT ORB 3/8IN
Pull with 3" center, 5" length x 1/2" width x 1-1/8" height. Use with two #8-32 x 1" type screws. Reusable, flexible, heavy-duty and water-resistant. Includes letters A to Z, numbers 1-0, plus one extra A, E, O, R, S and symbols (period, dash, comma, &, $ and cents). Blister Card. Size:  2-3/4"L x 2-1/4"W x 3/8"H. Includes mounting hardware: (Size(s): #5 Oval Head Screw x 5/8"; #5 Flat Head Screw x 1/2")
Knape & Vogt 256 Adjustable Dimple Pilaster Support Amerock Allison BP53010G10 Cup Cabinet Pull SHELF SUPPORT 1/4IN ZINC PLTD
Snaps securely into place. For use with No. 233 and No. 255. High strength steel. Pull with 3" center, 3-3/8" length x 1-1/4" width.
Amerock Essential'Z BP19259G10 Open Arch Cabinet Pull Amerock BP3404CB Cabinet Hinge Amerock Allison BP55222G10 Cabinet Pull
Pull with 3" center, 4-1/2" length x 9/16" width x 1" height. Use with two #8-32 x 1" type screws. Protected by Guardian Lifetime finish. 3-1/2"L x 1-7/16"W - Polybagged. Pull with 3" center.  3.6" length x 0.556" width. Use two #8 - 32 x 1" type screw.
HINGE INSET 3/8IN SATIN NICKEL Knape & Vogt 345 Shelf Support Knape & Vogt 345 Shelf Support
Size:  2-3/4"L x 2-1/4"W x 3/8"H. Includes mounting hardware: (Size(s): #5 Oval Head Screw x 5/8"; #5 Flat Head Screw x 1/2") For 5 mm drilled holes. Use with No.129 rubber cushion. 4.7 mm diameter x 5/16" L pin. Poly pack. For 5 mm drilled holes. Use with No.129 rubber cushion. 4.7 mm diameter x 5/16" L pin. Poly pack.
Knape & Vogt 346 Shelf Support Knape & Vogt 346P BR Shelf Support SHELF STANDARD BRASSHD 4FT
Use with No. 129 rubber cushion. For 1/4" diameter holes x 3/8"L pin. Use with No. 129 rubber cushion. For 1/4" diameter holes x 3/8"L pin. Mounts to the wall for surface or flush mounted applications. Predrilled nail and screw holes. Use with 158 Shelf Supports. 5/8" Wide, 3/16" Deep. Boxed loose barcoded.
SHELF STANDARD FRUITWOOD 4FT  SHELF STANDARD WHITE 4FT      SHELF STANDARD SILVER 6FT
Mounts to the wall for surface or flush mounted applications. Predrilled nail and screw holes. Use with 158 Shelf Supports. 5/8" Wide, 3/16" Deep. Boxed loose barcoded. Mounts to the wall for surface or flush mounted applications. Predrilled nail and screw holes. Use with 158 Shelf Supports. 5/8" Wide, 3/16" Deep. Boxed loose barcoded. Mounts to the wall for surface or flush mounted applications. Predrilled nail and screw holes. Use with 158 Shelf Supports. 5/8" Wide, 3/16" Deep. Boxed loose barcoded.
BRACKET SHELF DECO WHITE 6X6IN National Hardware 110BC Shelf Bracket Mintcraft 25213PHL Single Slot Shelf Standard
Heavy-duty steel construction. National Hardware Shelf Bracket, Series: 110BC, 10 in Length, 1.91 in Width, 8 in Depth, Steel, Zinc Plated, 35 lb Load Capacity, Suitable For Use With: National 110 Shelf Brackets, Includes: (12) No 7 x 3/4 in and 1-1/4 in Screws Single track adjustable wall standard. Dimensions: 5/8"W x 7/16"H x selected length. For use with Pro Source shelving. UPC tagged.
Knape & Vogt 0202-10PM Shelf Standard DRAWER PULL 3IN SATIN NICKEL  DRAWER PULL 3IN OIL-RUB BRONZE
Knape & Vogt Shelf Standard, Heavy Duty, 10 in Length, 4.88 in Width, 3.88 in Depth Traditional style. Traditional style.
Amerock Inspirations BP1580WID Botanica Leaf Cabinet Pull Mintcraft 25202PHL Shelf Standard Amerock BP19001SS Bow Cabinet Pull
Pull with 3" center, 5-5/8" length x 11/16" width x 1" height. Use with two #8-32 x 1" type screws. Protected by Guardian Lifetime finish. Adjustable dual track. 1pc. Dimensions: 1" H x 5/8: W x 25-1/2"L. For use with ProSource shelving. UPC tagged. Pull with 3" center, 3-21/32" length x 3/8" width x 1-3/16" height. Use with two #8-32 x 1" type screws.
Amerock Bar Pulls BP19010SS Cabinet Pull Amerock Inspirations BP1580R2 Botanica Leaf Cabinet Pull Amerock Revitalize BP55343ORB Cabinet Pull
Metal pull with 3" center to center, 5-1/3" length x 1/2" width x 1.34" height. Use with two #9-32 x 1" type screws. Pull with 3" center, 5-5/8" length x 11/16" width x 1" height. Use with two #8-32 x 1" type screws. Protected by Guardian Lifetime finish. 3-5/8" length x 5/8" width x 1-5/16" height. Use two #8 - 32 x 1" type screw.
Amerock Inspirations BP1590WID Plain Cabinet Pull DRAWER PULL 3IN ELEGANT BRASS Knape & Vogt 0111-40 Horizontal Fast Mount Hang Track
Metal pull with 3" center, 5.625" length x 0.688" width x 1" height. Use with two #8-32 x 1" type screws. Pull with 3" center, 5-5/8" length x 11/16" width x 1" height. Use with two #8-32 x 1" type screws. Protected by Guardian Lifetime finish. Horizontal track to hang uprights, load tested to 400 lb. per screw on wall studs. Tested to 100 lb. per anchor on dry wall mount.
Amerock Inspirations BP1590G10 Plain Cabinet Pull Knape & Vogt 7980TI Standard Hang Rail Link Amerock Allison BP176CAE Cabinet Pull
Metal pull with 3" center, 5.625" length x 0.688" width x 1" height. Use with two #8-32 x 1" type screws. Attaches to the top end of an 80 series wall standard to allow it to be hung on an installation hang rail. Packaged per pair with two links and two screws. Pull with back plate and 3" center, 5-9/16" length x 1" width x 1-1/4" height. Use with two #8-32 x 1" type screws.
Slim-Line 215 Decorative Regular Duty Shelf L-Bracket Stanley 234401 L-Shaped Shelf Bracket Knape & Vogt 0202-14PM Shelf Standard
Made of heavy-duty steel covered with high-impact plastic. Italian design. Functional and attractive. Designed for mounting shelves in closets and storage rooms. Brackets are punched for #12 wood screws. Safe Working Load: 150 lbs. Boxed. Knape & Vogt Shelf Standard, Heavy Duty, 14 in Length, 4.88 in Width, 3.88 in Depth
Amerock Inspirations BP1590ORB Plain Cabinet Pull National Hardware 110BC Shelf Bracket Amerock Revitalize BP55343G10 Cabinet Pull
Metal pull with 3" center, 5.625" length x 0.688" width x 1" height. Use with two #8-32 x 1" type screws. National Hardware Shelf Bracket, Series: 110BC, 12 in Length, 1.87 in Width, 10 in Depth, Steel, Zinc Plated, 35 lb Load Capacity, Suitable For Use With: National 110 Shelf Brackets, Includes: (12) No 7 x 3/4 in and 1-1/4 in Screws 3-5/8" length x 5/8" width x 1-5/16" height. Use two #8 - 32 x 1" type screw.
Stanley 229393 Decorative Shelf Bracket National Hardware N229-401 Ornamental Shelf Bracket National Hardware N229-385 Ornamental Shelf Bracket
Sp152bc - Stock-Pac Loose. National Hardware Shelf Bracket, Ornamental, Series: 152BC, 5 in Length, 3-1/2 in Depth, 0.1 in Thickness, Steel, Antique Bronze, 80 lb Load Capacity, Includes: Swivel Hook for 360 deg Plant Growth, For Indoor/Outdoor Applications National Hardware Shelf Bracket, Ornamental, Series: 152BC, 5 in Length, 3-1/2 in Depth, 0.1 in Thickness, Steel, Antique White, 80 lb Load Capacity, Includes: Swivel Hook for 360 deg Plant Growth, For Indoor/Outdoor Applications
SHELF STANDARD BRASSHD 6FT    SHELF STANDARD FRUITWOOD 6FT  SHELF STANDARD WHITE 6FT
Mounts to the wall for surface or flush mounted applications. Predrilled nail and screw holes. Use with 158 Shelf Supports. 5/8" Wide, 3/16" Deep. Boxed loose barcoded. Mounts to the wall for surface or flush mounted applications. Predrilled nail and screw holes. Use with 158 Shelf Supports. 5/8" Wide, 3/16" Deep. Boxed loose barcoded. Mounts to the wall for surface or flush mounted applications. Predrilled nail and screw holes. Use with 158 Shelf Supports. 5/8" Wide, 3/16" Deep. Boxed loose barcoded.
Knape & Vogt 80 BLK 72 Regular Duty Single Slot Shelf Standard Knape & Vogt 256 Adjustable Dimple Pilaster Support Knape & Vogt 7982WH Standard Link
For use with the 180 Series brackets. Standards can be mounted to nearly any type of wall. Reinforced brackets lock into slotted standard for strong, secure weight-bearing support. Fully adjustable 1" increments. 16-gauge steel construction. Dimension 5/8" wide x 13/32" high x selected length. Snaps securely into place. For use with No. 233 and No. 255. High strength steel. Attaches to the top end of an 82 series wall standard to allow it to be hung on an installation hang rail. Hold up to 900 lbs per pair (when installed on 16" stud centers). Packaged in pairs with two links and two screws. Polybagged.
Hy-Ko ST-3 Number and Letter Stencil Kit BRACKET SHELF DECO BLACK 6X6IN Knape & Vogt 208 Super Duty Ultimate Shelf L-Bracket
Reusable, flexible, heavy-duty and water-resistant. Includes letters A to Z, numbers 1-0, plus one extra A, E, O, R, S and symbols (period, dash, comma, &, $ and cents). Blister Card. Heavy-duty steel construction. 3/4" steel strut and 5mm thick steel bar construction. Tough epoxy coat finish. Recommended fasteners are 3" or longer 5/16" pan head screws mounted onto studs. Attach shelf using #8 or larger rounded-head wood screw. Holds up to 1,200 pounds per pair when mounted per manufacturer recommendations. Mounts directly to wall.  Less fasteners.
Knape & Vogt 208 Super Duty Ultimate Shelf L-Bracket Knape & Vogt 208 Extra Ultimate L-Bracket BRACKET SHELF DECO WHITE 8X8IN
3/4" steel strut and 5mm thick steel bar construction. Tough epoxy coat finish. Recommended fasteners are 3" or longer 5/16" pan head screws mounted onto studs. Attach shelf using #8 or larger rounded-head wood screw. Holds up to 1,200 pounds per pair when mounted per manufacturer recommendations. Mounts directly to wall.  Less fasteners. 3/4" steel strut and 5mm thick steel bar construction. Tough epoxy coat finish. Recommended fasteners are 3" or longer 5/16" pan head screws mounted onto studs. Attach shelf using #8 or larger rounded-head wood screw. Holds up to 1,200 pounds per pair when mounted per manufacturer recommendations. Mounts directly to wall.  Less fasteners. Heavy-duty steel construction.
Amerock Mulholland BP53030ORB Square Cabinet Pull Amerock Kane BP53702G10 Transitional Cabinet Pull Amerock Inspirations BP1584ORB Rope Cabinet Pull
Pull with 3" center. 3-3/4" length x 3/4" width x 1-1/8" height. Use with two #8-32 x 1" type screws. 4-1/2" length x 3/4" width x 1-1/8" height. Use two #8-32 x 1" type screws. Pull with 3" center, 4-1/8" length x 7/16" width x 1-1/4" height. Use with two #8-32 x 1" type screws. Protected by Guardian Lifetime finish.
Amerock Mulholland BP53030G10 Square Cabinet Pull National Hardware 110BC Shelf Bracket Amerock Brass and Sterling Traditions BP1300ORB Traditional Cabinet Pull
Pull with 3" center. 3-3/4" length x 3/4" width x 1-1/8" height. Use with two #8-32 x 1" type screws. National Hardware Shelf Bracket, Series: 110BC, 14 in Length, 1.93 in Width, 12 in Depth, Steel, Zinc Plated, 35 lb Load Capacity, Suitable For Use With: National 110 Shelf Brackets, Includes: (12) No 7 x 3/4 in and 1-1/4 in Screws Metal pull with 3" center, 1.0625" height. Use with two #8-32 x 1" type screws.
Amerock Essential'Z BP9365G10 Cup Cabinet Pull BRACKET SHELF DECO BLK 8X8IN  Amerock Bar Pulls BP40515ORB Transitional Cabinet Pull
Pull with 2-1/2" center, 4-1/8" length x 1" width x 1" height. Use with two #8-32 x 1" type screws. Protected by Guardian Lifetime finish. Heavy-duty steel construction. Pull with 3" center, 5-3/8" length x 1/2" width x 1-3/8" height. Use with two #8-32 x 1" type screws.
BRACKET SHELF DECO SAT NIC 6X6 Knape & Vogt 208 Extra Ultimate L-Bracket Knape & Vogt 208 Super Duty Ultimate Shelf L-Bracket
Heavy-duty steel construction. 3/4" steel strut and 5mm thick steel bar construction. Tough epoxy coat finish. Recommended fasteners are 3" or longer 5/16" pan head screws mounted onto studs. Attach shelf using #8 or larger rounded-head wood screw. Holds up to 1,200 pounds per pair when mounted per manufacturer recommendations. Mounts directly to wall.  Less fasteners. 3/4" steel strut and 5mm thick steel bar construction. Tough epoxy coat finish. Recommended fasteners are 3" or longer 5/16" pan head screws mounted onto studs. Attach shelf using #8 or larger rounded-head wood screw. Holds up to 1,200 pounds per pair when mounted per manufacturer recommendations. Mounts directly to wall.  Less fasteners.
Knape & Vogt 208 Super Duty Ultimate Shelf L-Bracket Mintcraft 25214PHL Single Slot Shelf Standard Mintcraft 25203PHL Dual Slot Shelf Standard
3/4" steel strut and 5mm thick steel bar construction. Tough epoxy coat finish. Recommended fasteners are 3" or longer 5/16" pan head screws mounted onto studs. Attach shelf using #8 or larger rounded-head wood screw. Holds up to 1,200 pounds per pair when mounted per manufacturer recommendations. Mounts directly to wall.  Less fasteners. Single track adjustable wall standard. Dimensions: 5/8"W x 7/16"H x selected length. For use with Pro Source shelving. UPC tagged. Adjustable dual track. 1pc. Dimensions: 1" H x 5/8: W x 25-1/2"L. For use with ProSource shelving. UPC tagged.
Hy-Ko ST-4 Number and Letter Stencil Kit Stanley 229450 Decorative Shelf Bracket National Hardware N229-468 Ornamental Shelf Bracket
Reusable, flexible, heavy-duty and water-resistant. Includes letters A to Z, numbers 1-0, plus one extra A, E, O, R, S and symbols (period, dash, comma, &, $ and cents). Blister Card. Sp152bc - Stock-Pac Loose. National Hardware Shelf Bracket, Ornamental, Series: 152BC, 10 in Length, 7 in Depth, 0.1 in Thickness, Steel, Antique Bronze, 100 lb Load Capacity, Includes: Swivel Hook for 360 deg Plant Growth, For Indoor/Outdoor Applications
National Hardware N229-443 Ornamental Shelf Bracket Amerock Essential'Z BP9362G10 Subtle Arch Cabinet Pull Knape & Vogt 82 Twin Slot Standard
National Hardware Shelf Bracket, Ornamental, Series: 152BC, 10 in Length, 7 in Depth, 0.1 in Thickness, Steel, Antique White, 100 lb Load Capacity, Includes: Swivel Hook for 360 deg Plant Growth, For Indoor/Outdoor Applications Pull with 5" center, 7-3/16" length x 1/2" width x 1-1/4" height. Use with two #8-32 x 1" type screws. Protected by Guardian Lifetime finish. Features twice the slots for more strength. Two 10-1/2" brackets mounted to twin-slotted standards support up to 300 pounds per shelf when installed according to manufacturer's directions.
Stanley 229427 Decorative Shelf Bracket National Hardware N229-435 Ornamental Shelf Bracket National Hardware N229-419 Ornamental Shelf Bracket
Sp152bc - Stock-Pac Loose. National Hardware Shelf Bracket, Ornamental, Series: 152BC, 8 in Length, 5-1/2 in Depth, 0.1 in Thickness, Steel, Antique Bronze, 80 lb Load Capacity, Includes: Swivel Hook for 360 deg Plant Growth, For Indoor/Outdoor Applications National Hardware Shelf Bracket, Ornamental, Series: 152BC, 8 in Length, 5-1/2 in Depth, 0.1 in Thickness, Steel, Antique White, 80 lb Load Capacity, Includes: Swivel Hook for 360 deg Plant Growth, For Indoor/Outdoor Applications
SHELF BRACKET TRAD/DECO 7X8IN SHELF BRACKET TRAD/DECO 7X8IN SHELF BRCKET RUSTIC/DECO 7X8IN
Used to support shelves, includes mounting screws. Mounts to wall studs. Used to support shelves, includes mounting screws. Mounts to wall studs. Used to support shelves, includes mounting screws. Mounts to wall studs.
SHELF BRCKET MODERN/DECO 7X8IN SHELF BRCKET MODERN/DECO 7X8IN SHELF BRCKET MODERN/DECO 7X8IN
Used to support shelves, includes mounting screws. Mounts to wall studs. Used to support shelves, includes mounting screws. Mounts to wall studs. Used to support shelves, includes mounting screws. Mounts to wall studs.
Knape & Vogt 208 Super Duty Ultimate Shelf L-Bracket Knape & Vogt 208 Extra Ultimate L-Bracket National Hardware 111BC Super Strength Shelf Bracket
SHELF BRACKETS 12IN WHT
Our Price: $9.40
3/4" steel strut and 5mm thick steel bar construction. Tough epoxy coat finish. Recommended fasteners are 3" or longer 5/16" pan head screws mounted onto studs. Attach shelf using #8 or larger rounded-head wood screw. Holds up to 1,200 pounds per pair when mounted per manufacturer recommendations. Mounts directly to wall.  Less fasteners. 3/4" steel strut and 5mm thick steel bar construction. Tough epoxy coat finish. Recommended fasteners are 3" or longer 5/16" pan head screws mounted onto studs. Attach shelf using #8 or larger rounded-head wood screw. Holds up to 1,200 pounds per pair when mounted per manufacturer recommendations. Mounts directly to wall.  Less fasteners. National Hardware Shelf Bracket, Super Strength, Series: 111BC, 11-3/4 in Length, 8-1/4 in Width, 1.19 in Depth, 0.16 in Thickness, Steel, White, 600 lb Load Capacity, For Storing Heavy Objects in a Garage, Shed, Workshop or Basement
Amerock BP2811J2314 2-Way Concealed Face Frame Cabinet Hinge Hy-Ko ST-5 Number and Letter Stencil Kit SHELF BRACKET TRAD/DECO 7X8IN
Add smooth, quiet action and lock-in place adjustment to any face frame cabinet. Reusable, flexible, heavy-duty and water-resistant. Includes letters A to Z, numbers 1-0, plus one extra A, E, O, R, S and symbols (period, dash, comma, &, $ and cents). Blister Card. Used to support shelves, includes mounting screws. Mounts to wall studs.
SHELF BRCKET RUSTIC/DECO 7X8IN SHELF BRCKET RUSTIC/DECO 7X8IN Amerock BP4613D14 Frameless Concealed Cabinet Hinge
Used to support shelves, includes mounting screws. Mounts to wall studs. Used to support shelves, includes mounting screws. Mounts to wall studs. 110 degree, full inset, frameless hinge.
Amerock BP2811C1314 2-Way Concealed Self-Closing Frame Cabinet Hinge National Hardware 111BC Super Strength Shelf Bracket Amerock BP4611A14 Frameless Concealed Mortise Full Overlay Cabinet Hinge
SHELF BRACKETS 16IN WHT
Our Price: $10.85
Amerock Cabinet Hinge, 2-Way, Adjustable, Concealed, Self-Closing Frame, Nickel Plated, BHMS Approved, KCMA Certified, 1-1/4 in Overlay, 1-7/9 in Hole Pattern, 1/2 in Cup Depth, 105 deg Opening Angle National Hardware Shelf Bracket, Super Strength, Series: 111BC, 15-3/4 in Length, 10.63 in Width, 1.19 in Depth, 0.16 in Thickness, Steel, White, 600 lb Load Capacity, For Storing Heavy Objects in a Garage, Shed, Workshop or Basement 110 degree, full inset, frameless hinge.
BRACKET SHELF DECO SAT NIC 8X8 Knape & Vogt 208 Extra Ultimate L-Bracket Knape & Vogt 208 Extra Ultimate L-Bracket
3/4" steel strut and 5mm thick steel bar construction. Tough epoxy coat finish. Recommended fasteners are 3" or longer 5/16" pan head screws mounted onto studs. Attach shelf using #8 or larger rounded-head wood screw. Holds up to 1,200 pounds per pair when mounted per manufacturer recommendations. Mounts directly to wall.  Less fasteners. 3/4" steel strut and 5mm thick steel bar construction. Tough epoxy coat finish. Recommended fasteners are 3" or longer 5/16" pan head screws mounted onto studs. Attach shelf using #8 or larger rounded-head wood screw. Holds up to 1,200 pounds per pair when mounted per manufacturer recommendations. Mounts directly to wall.  Less fasteners.
PULL 3IN 76MM POLISH CHROME   Amerock Allison TEN174G10 Cabinet Pull Set Mintcraft 25204PHL Dual Slot Shelf Standard
Pull with 3" center, 4" length x 7/16" width x 3/4" height. Use with two #8-32 x 1" type screws. Transitional style pull with 3" center,  4-1/2 length  x 5/8" width  x 1" height. Use with two #8-32 x 1" type screws. Adjustable dual track. 1pc. Dimensions: 1" H x 5/8: W x 25-1/2"L. For use with ProSource shelving. UPC tagged.
PULL 3IN 76MM POLISHED BRASS  HINGE INSET 3/8IN SATIN NICKEL Hy-Ko ST-6 Number and Letter Stencil Kit
Pull with 3" center, 3.375" length x 0.312" width x 1.125" height. Use with two #8-32 x 1" type screws. Size:  2-3/4"L x 2-1/4"W x 3/8"H. Includes mounting hardware: (Size(s): #5 Oval Head Screw x 5/8"; #5 Flat Head Screw x 1/2") Reusable, flexible, heavy-duty and water-resistant. Includes letters A to Z, numbers 1-0, plus one extra A, E, O, R, S and symbols (period, dash, comma, &, $ and cents). Blister Card.
National Hardware 111BC Super Strength Shelf Bracket PEG SHELF MINI 1/4 CLR PLASTIC PULL 3IN 76MM SATIN NICKEL
SHELF BRACKETS 20IN WHT
Our Price: $13.04
National Hardware Shelf Bracket, Super Strength, Series: 111BC, 19.63 in Length, 13 in Width, 1.19 in Depth, 0.16 in Thickness, Steel, White, 500 lb Load Capacity, For Storing Heavy Objects in a Garage, Shed, Workshop or Basement Mini-style frequently used in stereo and display cabinets. 1/2"D support, 1/4"OD x 3/8"L peg. 12 lbs. per peg maximum safe-weight load. Pull with 3" center, 5-1/16" length x 5/8" width x 1" height. Use with two #8-32 x 1" type screws.
BRACKET SHELF FLDG WHITE 12IN BRACKET SHELF 4INX5IN GRAY    BRACKET SHELF 5INX6IN GRAY
Bracket can be folded for quick and easy storage. Safe working load 35 lbs. Visual-pack. Powder coated steel. Less screws - UPC labeled. Powder coated steel. Less screws - UPC labeled.
BRACKET SHELF CHOCOLATE 4X5IN PULL 3IN 76MM SATIN NICKEL    PULL 3IN 76MM OILRUB BRONZE
Powder coated steel. Less screws - UPC labeled. Pull with 3" center, 4" length x 7/16" width x 3/4" height. Use with two #8-32 x 1" type screws. 3? Center-to-center. 1-1/4? projection, 3-3/8? length, 1/2? width.
PEG SHELF 5MM WHITE MTL/PLASTC Amerock Allison TEN53003G10 Cabinet Pull Set 211BC SHELF BRACKET GREY 5X6IN
Fits a 5 mm dia. hole (3/16"); plastic seat with metal peg provides added strength. Metrically sized for most imported cabinet and bookshelves. 15 lbs. maximum safe load per peg. Transitional style, metal finishes collection. 3-3/4 in (96 mm) center-to-center pull. Includes mounting hardware: (Size(s):#8-32 x 1in Truss Head Machine Screw). Can be used as a support or brace. Strengths exceed ANSI/BHMA standards. Brackets are designed for use with standard dimensional lumber. First measurement indicates nominal width of shelf leg; second measurement denotes nominal length of wall leg. Bulk pak.
211BC SHELF BRACKET WHT 5X6IN 211BC SHELF BRACKET BLK 5X6IN BRACKET SHELF CHOCOLATE 5X6IN
Can be used as a support or brace. Strengths exceed ANSI/BHMA standards. Brackets are designed for use with standard dimensional lumber. First measurement indicates nominal width of shelf leg; second measurement denotes nominal length of wall leg. Bulk pak. Can be used as a support or brace. Strengths exceed ANSI/BHMA standards. Brackets are designed for use with standard dimensional lumber. First measurement indicates nominal width of shelf leg; second measurement denotes nominal length of wall leg. Bulk pak. Powder coated steel. Less screws - UPC labeled.
Stanley 250598 Decorative Modern Shelf Bracket PEG SHELF 1/4 NICKL PLATED MTL PEG SHELF 5MM BRASS PLATED MTL
Used to support shelves, includes mounting screws. Mounts to wall studs. Hole 3/8" deep; 1/2"  Metrically sized for most imported cabinets and bookshelves. 20 lbs. maximum safe load per peg. Hole 3/8" deep; 1/2"  Metrically sized for most imported cabinets and bookshelves. 20 lbs. maximum safe load per peg.
Stanley 218917 Utility Shelf Bracket Stanley 171066 Utility Shelf Bracket Stanley 218891 Utility Shelf Bracket
Can be used as a support or brace. Strengths exceed ANSI/BHMA standards. Brackets are designed for use with standard dimensional lumber. First measurement indicates nominal width of shelf leg; second measurement denotes nominal length of wall leg. Bulk pak. Can be used as a support or brace. Strengths exceed ANSI/BHMA standards. Brackets are designed for use with standard dimensional lumber. First measurement indicates nominal width of shelf leg; second measurement denotes nominal length of wall leg. Bulk pak. Can be used as a support or brace. Strengths exceed ANSI/BHMA standards. Brackets are designed for use with standard dimensional lumber. First measurement indicates nominal width of shelf leg; second measurement denotes nominal length of wall leg. Bulk pak.
PULL 3-3/4IN OILRUB BRONZE    PULL 3-3/4IN 96MM SATIN NICKEL BRACKET SHELF 6INX8IN GRAY
Transitional style, metal finishes collection. 3-3/4 in (96 mm) center-to-center pull. Includes mounting hardware: (Size(s):#8-32 x 1in Truss Head Machine Screw). Transitional style pull, 3-3/4? (96mm) mounting holes. 1? projection, 4-3/16? overall length, 19/13? width. Use with two #8-32 x 1" type screws. Powder coated steel. Less screws - UPC labeled.
BRACKET SHELF CHOCOLATE 6X8IN Amerock Allison TEN174ORB Cabinet Pull Set BRACKET SHELF BLACK 4X5 IN
Powder coated steel. Less screws - UPC labeled. Transitional style pull with 3" center,  4-1/2 length  x 5/8" width  x 1" height. Use with two #8-32 x 1" type screws. Powder coated steel. Less screws - UPC labeled.
BRACKET SHELF BLACK 5X6 IN    BRACKET SHELF 4INX5IN WHITE   BRACKET SHELF 5INX6IN WHITE
Powder coated steel. Less screws - UPC labeled. Powder coated steel. Less screws - UPC labeled. Powder coated steel. Less screws - UPC labeled.
Knape & Vogt 1980 Pre-Finished All Purpose Shelf Board Knape & Vogt 1980 ESP 8X24 Decorative Regular Duty Shelf Board Stanley 185025 Utility Shelf Bracket
Made of 5/8" thick particleboard. Simulated woodgrain finish is produced by an exacting photo-processing technique. Includes precision edge banding. Holds up to 200 Lbs. Made of 5/8" thick particleboard. Simulated woodgrain finish is produced by an exacting photo-processing technique. Includes precision edge banding. Holds up to 200 Lbs. Can be used as a support or brace. Strengths exceed ANSI/BHMA standards. Brackets are designed for use with standard dimensional lumber. First measurement indicates nominal width of shelf leg; second measurement denotes nominal length of wall leg. Bulk pak.
211BC SHELF BRACKET FW 5X6IN  Hy-Ko PLS-10 Parking Lot Stencil Kit Amerock Essential'Z TEN26201G10 Cabinet Pull Set
Can be used as a support or brace. Strengths exceed ANSI/BHMA standards. Brackets are designed for use with standard dimensional lumber. First measurement indicates nominal width of shelf leg; second measurement denotes nominal length of wall leg. Bulk pak. Made of heavy stencil board. Reusable folded stencil. Water resistant. Easy to mark any parking lot surface. Displays 32-1/2" x 25" handicapped parking symbol. Pull with 3" center, 5-1/4" length x 3/8" width x 1" height. Use with two #8-32 x 1" type screws.
Stanley 171074 Utility Shelf Bracket Stanley 218925 Utility Shelf Bracket Knape & Vogt 1980 Pre-Finished All Purpose Shelf Board
Can be used as a support or brace. Strengths exceed ANSI/BHMA standards. Brackets are designed for use with standard dimensional lumber. First measurement indicates nominal width of shelf leg; second measurement denotes nominal length of wall leg. Bulk pak. Can be used as a support or brace. Strengths exceed ANSI/BHMA standards. Brackets are designed for use with standard dimensional lumber. First measurement indicates nominal width of shelf leg; second measurement denotes nominal length of wall leg. Bulk pak. Made of 5/8" thick particleboard. Simulated woodgrain finish is produced by an exacting photo-processing technique. Includes precision edge banding. Holds up to 200 Lbs.
BRACKET SHELF BLACK 6X8IN     ShelfTrack 2800 Dual Slot Shelf Standard Knape & Vogt BK-0100-2 Dual Slot Shelf Standard