Home > HARDWARE > GENERAL HARDWARE > SHELVING & CLOSET > SHELF BRACKETS
Choose a sub category:
AMERICAN FLAGS SHELF BRACKETS SHELF BRACKETS
FLAG BRACKETS / POLES SHELF BRACKETS - HEAVY DUTY SHELF BRACKETS - HEAVY DUTY
SHELF BRACKETS - WOOD SHELF BRACKETS - WOOD SHELF KITS
SHELF KITS SHELF STANDARDS SHELF STANDARDS
SHELF BRACKETS FOR STANDARDS SHELF BRACKETS FOR STANDARDS SHELF NAILS/SCREWS
SHELF NAILS/SCREWS SHELF SUPPORTS SHELF SUPPORTS
PRE-FINISHED SHELVES PRE-FINISHED SHELVES VENTILATED SHELVING
VENTILATED SHELVING VENTILATED SHELVING MOUNTING VENTILATED SHELVING MOUNTING
VENTILATED SHELVING ACCESSORI VENTILATED SHELVING ACCESSORI VENTILATED SHELVING KITS
VENTILATED SHELVING KITS VENTILATED STORAGE SHLVS/CARTS VENTILATED STORAGE SHLVS/CARTS
METAL SHELVING METAL SHELVING PLASTIC SHELVING
PLASTIC SHELVING GLASS SHELVING GLASS SHELVING
CLOSET ROD BRACKETS CLOSET ROD BRACKETS CLOSET POLE SOCKETS
CLOSET POLE SOCKETS CLOSET RODS CLOSET RODS
CLOSET SYSTEMS CLOSET SYSTEMS CLOSET ACCESSORIES
CLOSET ACCESSORIES
Sort By:
1
Amerock BP34712G Flexgrip Friction Catch Amerock BP3473PT Magnet Catch Amerock BP347414 Double Roller Catch
Size: 1-5/16"L x 3/4"W x 5/8"H. Polybagged. Size: 2"L x 1-1/8"W x 1/2"H; Steel Strike: 1"L x 3/4"W x 1/16"H. Polybagged. Size: 1"L x 15/16"W x 1/2"H; steel strike: 1"L x 11/16"W x 3/8"H. Polybagged.
Amerock BP97143G Roller Catch Stanley 218941 Utility Shelf Bracket National Hardware 110BC Shelf Bracket
Polybagged. Can be used as a support or brace. Strengths exceed ANSI/BHMA standards. Brackets are designed for use with standard dimensional lumber. First measurement indicates nominal width of shelf leg; second measurement denotes nominal length of wall leg. Bulk pak. National Hardware Shelf Bracket, Series: 110BC, 4 in Length, 1.37 in Width, 3 in Depth, Steel, Zinc Plated, 10 lb Load Capacity, Suitable For Use With: National 110 Shelf Brackets, Includes: (12) No 7 x 3/4 in and 1-1/4 in Screws
CATCH CABINET SPRING          CATCH CABINET DOUBLE ROLLER   CATCH MAGNETIC PLASTIC TAN
CATCH CABINET SPRING
Our Price: $1.47
Spring catch for cabinets. Jaws provide automatic adjustment for normal wood shrinkage. Ball-head screw and regular strike provided. Slotted screw holes permit easy adjustment. Self-marking strike for quick installation. 1-1/2" x 3/8" strike; 1-7/16" x 3/4" case. With screws. Slotted screw holes on case permit easy adjustment. Self-aligning arms work independently assuring easy, positive action. Rollers absorb shock. Hold door away from cabinet, minimizing noise. Self-marking strike for quick installation. With screws. Single screw mounting speeds installation. Slotted screw hole in case provides ample adjustment. Rugged case has no sharp corners. "Floating" magnet helps assure positive contact. Bright zinc plated, 1-1/8" x 11/16" strike; 1-1/8" x 1-1/16" case. With screws.
Amerock BP98232G Spring Cushion Roller Catch National Hardware 110BC Shelf Bracket Amerock BP3428BB Self-Closing Cabinet Hinge
HINGE CABINET STL 3/8IN
Our Price: $2.08
Size: 1-3/4"L x 1-1/4"W x 3/8"H. Polybagged. National Hardware Shelf Bracket, Series: 110BC, 5 in Length, 1.34 in Width, 4 in Depth, Steel, Zinc Plated, 10 lb Load Capacity, Suitable For Use With: National 110 Shelf Brackets, Includes: (12) No 7 x 3/4 in and 1-1/4 in Screws 3/8" inset. Use with five #6 O.H. x 5/8" type screws. 2-3/4"L x 2"W x 1/8"H.
Knape & Vogt 255 Adjustable Shelf Standard BRACKET SHELF HD WHITE 8IN    Knape & Vogt 180 Regular Duty Shelf Bracket
Pilasters for built-in shelving and book case applications. Adjustable on 1/2" centers. 23 gauge high-strength steel, 5/8" wide x 3/16" deep. Dimensions: 1/16"W x 2-3/8"H x selected depth. For use with Pro Source shelving. UPC tagged. For use with the 80 Series standards. For shelving applications in light industrial, commercial, and residential use. Standards can be mounted to nearly any type of wall. For storage and display applications in retail stores, grocery stores, light warehouses, repair garages, maintenance storage, business office storage, and residential storage. Reinforced brackets lock into slotted standards for strong, secure weight-bearing support. Fully adjustable in 1" increments. 16-gauge cold rolled steel construction. Tested to meet or exceed ANSI performance standards as established by BHMA.
Knape & Vogt 180 Boltless Regular Duty Shelf Bracket Amerock BP34283 Self-Closing Cabinet Hinge Amerock BP34293 Self-Closing Variable Overlay Cabinet Hinge
For use with the 80 Series standards. For shelving applications in light industrial, commercial, and residential use. Standards can be mounted to nearly any type of wall. For storage and display applications in retail stores, grocery stores, light warehouses, repair garages, maintenance storage, business office storage, and residential storage. Reinforced brackets lock into slotted standards for strong, secure weight-bearing support. Fully adjustable in 1" increments. 16-gauge cold rolled steel construction. Tested to meet or exceed ANSI performance standards as established by BHMA. 3/8" inset. Use with five #6 O.H. x 5/8" type screws. 2-3/4"L x 2"W x 1/8"H. Tested for durability in conditions exceeding all KCMA certification requirements and BHMS standards for cycle life, strength and finish quality. Reliable, self-closing power of dual compression springs. Use (2) #6 O.H. x 5/8" type and (3) #6 F.H. x 1/2" type screws. 2.75"L x 1.875"W x .625"H.
Knape & Vogt BK-0101 Shelf Bracket Schlage 325A92 Double Pole Magnet Catch Knape & Vogt PK255 BR 36 Standard Pilaster
Designed to fit into the fast mount standards, load tested to 100 lbs. Case design allows easy magnet adjustment on cabinet or small door applications. Case size: 2-1/16" x 1-1/8" x 5/8". Packed with sheet metal screws. Slim-pak, polybagged. Pilasters for built-in shelving and book case applications. Adjustable on 1/2" centers. 23 gauge high-strength steel, 5/8" wide x 3/16" deep.
National Hardware 110BC Shelf Bracket Knape & Vogt 180 Regular Duty Shelf Bracket Amerock BP97653PT Magnet Catch with Offset Strike
National Hardware Shelf Bracket, Series: 110BC, 6 in Length, 1.4 in Width, 5 in Depth, Steel, Zinc Plated, 25 lb Load Capacity, Suitable For Use With: National 110 Shelf Brackets, Includes: (12) No 7 x 3/4 in and 1-1/4 in Screws For use with the 80 Series standards. For shelving applications in light industrial, commercial, and residential use. Standards can be mounted to nearly any type of wall. For storage and display applications in retail stores, grocery stores, light warehouses, repair garages, maintenance storage, business office storage, and residential storage. Reinforced brackets lock into slotted standards for strong, secure weight-bearing support. Fully adjustable in 1" increments. 16-gauge cold rolled steel construction. Tested to meet or exceed ANSI performance standards as established by BHMA. Size: 1-15/16"L x 11/16"W; Strike 1-1/8"L x 7/8"W x 3/4"H. Use (4) #6 T.H. x 1/2" screws and (1) #15 x 1/2" nail. Polybagged.
Knape & Vogt 180 Boltless Regular Duty Shelf Bracket Knape & Vogt 180 Boltless Regular Duty Shelf Bracket Knape & Vogt 180 Regular Duty Shelf Bracket
For use with the 80 Series standards. For shelving applications in light industrial, commercial, and residential use. Standards can be mounted to nearly any type of wall. For storage and display applications in retail stores, grocery stores, light warehouses, repair garages, maintenance storage, business office storage, and residential storage. Reinforced brackets lock into slotted standards for strong, secure weight-bearing support. Fully adjustable in 1" increments. 16-gauge cold rolled steel construction. Tested to meet or exceed ANSI performance standards as established by BHMA. For use with the 80 Series standards. For shelving applications in light industrial, commercial, and residential use. Standards can be mounted to nearly any type of wall. For storage and display applications in retail stores, grocery stores, light warehouses, repair garages, maintenance storage, business office storage, and residential storage. Reinforced brackets lock into slotted standards for strong, secure weight-bearing support. Fully adjustable in 1" increments. 16-gauge cold rolled steel construction. Tested to meet or exceed ANSI performance standards as established by BHMA. For use with the 80 Series standards. For shelving applications in light industrial, commercial, and residential use. Standards can be mounted to nearly any type of wall. For storage and display applications in retail stores, grocery stores, light warehouses, repair garages, maintenance storage, business office storage, and residential storage. Reinforced brackets lock into slotted standards for strong, secure weight-bearing support. Fully adjustable in 1" increments. 16-gauge cold rolled steel construction. Tested to meet or exceed ANSI performance standards as established by BHMA.
Amerock BP3429BB Self-Closing Variable Overlay Cabinet Hinge CATCH MAGNETIC                Amerock BP9783AL Magnet Catch
CATCH MAGNETIC
Our Price: $2.67
Tested for durability in conditions exceeding all KCMA certification requirements and BHMS standards for cycle life, strength and finish quality. Reliable, self-closing power of dual compression springs. Use (2) #6 O.H. x 5/8" type and (3) #6 F.H. x 1/2" type screws. 2.75"L x 1.875"W x .625"H. For cabinet doors. Doors opened by pushing inward to release contact with magnetic base. Impregnated magnet withstands rugged use. Bright zinc plated strike. Includes fasteners. Size: 2"L x 1"W x 5/8"H; Strike: 1-1/8"L x 3/4"H. Polybagged.
Knape & Vogt 180 Regular Duty Shelf Bracket Knape & Vogt 255 Standard Pilaster Amerock Inspiration BP3428ORB Self-Closing Cabinet Hinge
For use with the 80 Series standards. For shelving applications in light industrial, commercial, and residential use. Standards can be mounted to nearly any type of wall. For storage and display applications in retail stores, grocery stores, light warehouses, repair garages, maintenance storage, business office storage, and residential storage. Reinforced brackets lock into slotted standards for strong, secure weight-bearing support. Fully adjustable in 1" increments. 16-gauge cold rolled steel construction. Tested to meet or exceed ANSI performance standards as established by BHMA. Pilasters for built-in shelving and book case applications. Adjustable on 1/2" centers. 23 gauge high-strength steel, 5/8" wide x 3/16" deep. 3/8" inset. Use with five #6 O.H. x 5/8" type screws. 2-3/4"L x 2"W x 1/8"H.
Schlage C901 Middle Butt Cabinet Hinge Knape & Vogt 180 Boltless Regular Duty Shelf Bracket Knape & Vogt 180 Boltless Regular Duty Shelf Bracket
Bright Brass Finish. For use with the 80 Series standards. For shelving applications in light industrial, commercial, and residential use. Standards can be mounted to nearly any type of wall. For storage and display applications in retail stores, grocery stores, light warehouses, repair garages, maintenance storage, business office storage, and residential storage. Reinforced brackets lock into slotted standards for strong, secure weight-bearing support. Fully adjustable in 1" increments. 16-gauge cold rolled steel construction. Tested to meet or exceed ANSI performance standards as established by BHMA. For use with the 80 Series standards. For shelving applications in light industrial, commercial, and residential use. Standards can be mounted to nearly any type of wall. For storage and display applications in retail stores, grocery stores, light warehouses, repair garages, maintenance storage, business office storage, and residential storage. Reinforced brackets lock into slotted standards for strong, secure weight-bearing support. Fully adjustable in 1" increments. 16-gauge cold rolled steel construction. Tested to meet or exceed ANSI performance standards as established by BHMA.
Knape & Vogt 180 Boltless Regular Duty Shelf Bracket Knape & Vogt 255 Standard Pilaster Knape & Vogt 180 Regular Duty Shelf Bracket
For use with the 80 Series standards. For shelving applications in light industrial, commercial, and residential use. Standards can be mounted to nearly any type of wall. For storage and display applications in retail stores, grocery stores, light warehouses, repair garages, maintenance storage, business office storage, and residential storage. Reinforced brackets lock into slotted standards for strong, secure weight-bearing support. Fully adjustable in 1" increments. 16-gauge cold rolled steel construction. Tested to meet or exceed ANSI performance standards as established by BHMA. Pilasters for built-in shelving and book case applications. Adjustable on 1/2" centers. 23 gauge high-strength steel, 5/8" wide x 3/16" deep. For use with the 80 Series standards. For shelving applications in light industrial, commercial, and residential use. Standards can be mounted to nearly any type of wall. For storage and display applications in retail stores, grocery stores, light warehouses, repair garages, maintenance storage, business office storage, and residential storage. Reinforced brackets lock into slotted standards for strong, secure weight-bearing support. Fully adjustable in 1" increments. 16-gauge cold rolled steel construction. Tested to meet or exceed ANSI performance standards as established by BHMA.
Mintcraft 25211PHL Single Slot Shelf Standard Amerock BP3429ORB Self-Closing Variable Overlay Cabinet Hinge Amerock BP9798AW Magnet Catch
Single track adjustable wall standard. Dimensions: 5/8"W x 7/16"H x selected length. For use with Pro Source shelving. UPC tagged. Tested for durability in conditions exceeding all KCMA certification requirements and BHMS standards for cycle life, strength and finish quality. Reliable, self-closing power of dual compression springs. Use (2) #6 O.H. x 5/8" type and (3) #6 F.H. x 1/2" type screws. 2.75"L x 1.875"W x .625"H. Size: 2-1/32"L x 1-1/16"W x 13/16"H; Strike 1"L x 3/4"W. Polybagged.
Knape & Vogt 180 Regular Duty Shelf Bracket Knape & Vogt 180 Regular Duty Shelf Bracket Knape & Vogt PK255 BR 48 Standard Pilaster
For use with the 80 Series standards. For shelving applications in light industrial, commercial, and residential use. Standards can be mounted to nearly any type of wall. For storage and display applications in retail stores, grocery stores, light warehouses, repair garages, maintenance storage, business office storage, and residential storage. Reinforced brackets lock into slotted standards for strong, secure weight-bearing support. Fully adjustable in 1" increments. 16-gauge cold rolled steel construction. Tested to meet or exceed ANSI performance standards as established by BHMA. For use with the 80 Series standards. For shelving applications in light industrial, commercial, and residential use. Standards can be mounted to nearly any type of wall. For storage and display applications in retail stores, grocery stores, light warehouses, repair garages, maintenance storage, business office storage, and residential storage. Reinforced brackets lock into slotted standards for strong, secure weight-bearing support. Fully adjustable in 1" increments. 16-gauge cold rolled steel construction. Tested to meet or exceed ANSI performance standards as established by BHMA. Pilasters for built-in shelving and book case applications. Adjustable on 1/2" centers. 23 gauge high-strength steel, 5/8" wide x 3/16" deep.
Knape & Vogt 255 Adjustable Shelf Standard Knape & Vogt 255 Standard Pilaster Knape & Vogt 182 Bracket
Pilasters for built-in shelving and book case applications. Adjustable on 1/2" centers. 23 gauge high-strength steel, 5/8" wide x 3/16" deep. Pilasters for built-in shelving and book case applications. Adjustable on 1/2" centers. 23 gauge high-strength steel, 5/8" wide x 3/16" deep. Double-lug bracket design prevents shelves and contents from falling when bumped. Supports adjust to accommodate changes in storage and layout. Rounded corners and recessed groove design. Cover strips conceal screw holes and slots for a more refined appearance. Epoxy finish is resistant to chips and scratches.
Knape & Vogt 255 Adjustable Shelf Standard Amerock Inspiration BP3428G10 Self-Closing Cabinet Hinge Amerock Inspiration BP3429G10 Self-Closing Cabinet Hinge
Pilasters for built-in shelving and book case applications. Adjustable on 1/2" centers. 23 gauge high-strength steel, 5/8" wide x 3/16" deep. 3/8" inset. Use with five #6 O.H. x 5/8" type screws. 2-3/4"L x 2"W x 1/8"H. Tested for durability in conditions exceeding all KCMA certification requirements and BHMS standards for cycle life, strength and finish quality. Reliable, self-closing power of dual compression springs. Use (2) #6 O.H. x 5/8" type and (3) #6 F.H. x 1/2" type screws. 2.75"L x 1.875"W x .625"H.
Amerock BP32301BR Magnet Catch Prime Line U 9047 Roller Catch Knape & Vogt 180 Boltless Regular Duty Shelf Bracket
Inspires, coordinate and help express personal style. For the kitchen, bathroom and the rest of the home. 1-11/16"L x 2"W x 11/16"H. Polybagged. 1-7/16"L plated steel housing and 1-3/4"W x 15/16"H strike with 3/4" spring loaded nylon roller, designed for use on interior closet and cabinet doors. With screws. For use with the 80 Series standards. For shelving applications in light industrial, commercial, and residential use. Standards can be mounted to nearly any type of wall. For storage and display applications in retail stores, grocery stores, light warehouses, repair garages, maintenance storage, business office storage, and residential storage. Reinforced brackets lock into slotted standards for strong, secure weight-bearing support. Fully adjustable in 1" increments. 16-gauge cold rolled steel construction. Tested to meet or exceed ANSI performance standards as established by BHMA.
Knape & Vogt 180 Boltless Regular Duty Shelf Bracket Knape & Vogt 180 Boltless Regular Duty Shelf Bracket Knape & Vogt 180 Regular Duty Shelf Bracket
For use with the 80 Series standards. For shelving applications in light industrial, commercial, and residential use. Standards can be mounted to nearly any type of wall. For storage and display applications in retail stores, grocery stores, light warehouses, repair garages, maintenance storage, business office storage, and residential storage. Reinforced brackets lock into slotted standards for strong, secure weight-bearing support. Fully adjustable in 1" increments. 16-gauge cold rolled steel construction. Tested to meet or exceed ANSI performance standards as established by BHMA. For use with the 80 Series standards. For shelving applications in light industrial, commercial, and residential use. Standards can be mounted to nearly any type of wall. For storage and display applications in retail stores, grocery stores, light warehouses, repair garages, maintenance storage, business office storage, and residential storage. Reinforced brackets lock into slotted standards for strong, secure weight-bearing support. Fully adjustable in 1" increments. 16-gauge cold rolled steel construction. Tested to meet or exceed ANSI performance standards as established by BHMA. For use with the 80 Series standards. For shelving applications in light industrial, commercial, and residential use. Standards can be mounted to nearly any type of wall. For storage and display applications in retail stores, grocery stores, light warehouses, repair garages, maintenance storage, business office storage, and residential storage. Reinforced brackets lock into slotted standards for strong, secure weight-bearing support. Fully adjustable in 1" increments. 16-gauge cold rolled steel construction. Tested to meet or exceed ANSI performance standards as established by BHMA.
Knape & Vogt 182 Adjustable Twin Slot Bracket Knape & Vogt 82 WH 16.5 Shelf Standard Knape & Vogt 182 Bracket
Double-lug bracket design prevents shelves and contents from falling when bumped. Supports adjust to accommodate changes in storage and layout. Rounded corners and recessed groove design. Cover strips conceal screw holes and slots for a more refined appearance. Epoxy finish is resistant to chips and scratches. Features twice the slots for more strength. Two 10-1/2" brackets mounted to twin-slotted standards support up to 300 pounds per shelf when installed according to manufacturer's directions. Double-lug bracket design prevents shelves and contents from falling when bumped. Supports adjust to accommodate changes in storage and layout. Rounded corners and recessed groove design. Cover strips conceal screw holes and slots for a more refined appearance. Epoxy finish is resistant to chips and scratches.
ALUM MAGNETIC                 Knape & Vogt 80 BLK 24 Regular Duty Single Slot Shelf Standard Slim-Line 215 Decorative Regular Duty Shelf L-Bracket
ALUM MAGNETIC
Our Price: $3.22
For pairs of cabinet doors or full size doors. Floating action magnet and pole piece assemblies pivot to allow for full contact with strikes. Impregnated magnet withstands rugged use. Slotted screw holes in case and off-center hole in strike for accurate and easy installation. Includes two 1-1/8" x 11/16" strikes and one 3-1/4" x 1-3/8" case. With fasteners. For use with the 180 Series brackets. Standards can be mounted to nearly any type of wall. Reinforced brackets lock into slotted standard for strong, secure weight-bearing support. Fully adjustable 1" increments. 16-gauge steel construction. Dimension 5/8" wide x 13/32" high x selected length. Made of heavy-duty steel covered with high-impact plastic. Italian design. Functional and attractive.
Schlage C903 Middle Butt Cabinet Hinge Amerock BP7139W Self-Closing Semi-Concealed Cabinet Hinge Knape & Vogt CD-0106 Joist Bracket
Bright Brass Finish. Tested for durability in conditions exceeding all KCMA certification requirements and BHMS standards for cycle life, strength and finish quality. Reliable, self-closing power of dual compression springs. Use (2) #6 O.H. x 5/8" type and (3) #6 F.H. x 1/2" type screws. 2.75"L x 1.875"W x .625"H. Durable, use to install fast mount wall standards over finish wall without fastening wall standard to wall. Fastens to stud wall header plate. Use with #0100 fast mount wall standards. Supports 600 Lbs. Per Bracket.
Knape & Vogt CD-0104 Fast Mount Hook Schlage SP2A92 Cabinet Latch Knape & Vogt 182 Twin Slot Bracket
Hook hangs fast-mount track from top of basement wall. No screws required. Load tested up to 1,000 lbs per hook. 1-3/8" x 5/8" Plate. 13/16" x 5/8" Strike. Polybagged. Double-lug bracket design prevents shelves and contents from falling when bumped. Supports adjust to accommodate changes in storage and layout. Rounded corners and recessed groove design. Cover strips conceal screw holes and slots for a more refined appearance. Epoxy finish is resistant to chips and scratches.
Knape & Vogt 182 Adjustable Twin Slot Bracket Amerock BP792826 Self-Closing Imperial Cabinet Hinge Knape & Vogt 182 Adjustable Twin Slot Bracket
Double-lug bracket design prevents shelves and contents from falling when bumped. Supports adjust to accommodate changes in storage and layout. Rounded corners and recessed groove design. Cover strips conceal screw holes and slots for a more refined appearance. Epoxy finish is resistant to chips and scratches. Amerock Cabinet Hinge, Self-Closing, Imperial, 5 Holes, 2-3/4 in Door Leaf Length, 2 in Door Leaf Width, Face Mounting, Steel, Polished Chrome, BHMS Approved, KCMA Certified, With 3/8 in Inset Double-lug bracket design prevents shelves and contents from falling when bumped. Supports adjust to accommodate changes in storage and layout. Rounded corners and recessed groove design. Cover strips conceal screw holes and slots for a more refined appearance. Epoxy finish is resistant to chips and scratches.
Knape & Vogt PK255 ZC 60 Standard Pilaster Knape & Vogt PK255 BR 72 Standard Pilaster Knape & Vogt 255 Standard Pilaster
Pilasters for built-in shelving and book case applications. Adjustable on 1/2" centers. 23 gauge high-strength steel, 5/8" wide x 3/16" deep. Pilasters for built-in shelving and book case applications. Adjustable on 1/2" centers. 23 gauge high-strength steel, 5/8" wide x 3/16" deep. Pilasters for built-in shelving and book case applications. Adjustable on 1/2" centers. 23 gauge high-strength steel, 5/8" wide x 3/16" deep.
Mintcraft 25212PHL Single Slot Shelf Standard Knape & Vogt 255 Standard Pilaster Amerock BP33772AL Double Magnet Catch
Single track adjustable wall standard. Dimensions: 5/8"W x 7/16"H x selected length. For use with Pro Source shelving. UPC tagged. Pilasters for built-in shelving and book case applications. Adjustable on 1/2" centers. 23 gauge high-strength steel, 5/8" wide x 3/16" deep. 3-1/4"L x 1-1/8"W x 9/16"H (projection). Polybagged.
National Hardware 110BC Shelf Bracket Schlage C904 Middle Butt Cabinet Hinge Knape & Vogt 182 Twin Slot Bracket
National Hardware Shelf Bracket, Series: 110BC, 8 in Length, 1.56 in Width, 6 in Depth, Steel, Zinc Plated, 25 lb Load Capacity, Suitable For Use With: National 110 Shelf Brackets, Includes: (12) No 7 x 3/4 in and 1-1/4 in Screws Bright Brass Finish. Double-lug bracket design prevents shelves and contents from falling when bumped. Supports adjust to accommodate changes in storage and layout. Rounded corners and recessed groove design. Cover strips conceal screw holes and slots for a more refined appearance. Epoxy finish is resistant to chips and scratches.
Knape & Vogt BK-0102 Shelf Bracket Schlage C904 Broad Butt Cabinet Hinge Knape & Vogt 182 Twin Slot Bracket
Designed to fit into the fast mount standards. Load tested to 150 lbs. Bright Brass Finish. Double-lug bracket design prevents shelves and contents from falling when bumped. Supports adjust to accommodate changes in storage and layout. Rounded corners and recessed groove design. Cover strips conceal screw holes and slots for a more refined appearance. Epoxy finish is resistant to chips and scratches.
Knape & Vogt RP-0046-WT Shelf and Rod Bracket SHELF STANDARD SILVER 4FT     Slim-Line 215 Decorative Regular Duty Shelf L-Bracket
Holds up to 500 lb. per pair.  For 12" deep shelf. Mounts to the wall for surface or flush mounted applications. Predrilled nail and screw holes. Use with 158 Shelf Supports. 5/8" Wide, 3/16" Deep. Boxed loose barcoded. Made of heavy-duty steel covered with high-impact plastic. Italian design. Functional and attractive.
Knape & Vogt Designer 182 Shelf Bracket CATCH CABINET WHITE           CATCH CABINET WHITE
CABINET CATCHES WHT
Our Price: $4.20
CABINET CATCHES WHT
Our Price: $4.20
Double-lug bracket design prevents shelves and contents from falling when bumped. Supports adjust to accommodate changes in storage and layout. Rounded corners and recessed groove design. Cover strips conceal screw holes and slots for a more refined appearance. Epoxy finish is resistant to chips and scratches. Design allows magnet to pivot so that it will always center squarely on the metal strike for maximum holding strength. Offers sturdy, permanent magnet in a nylon case. Slotted screw holes are for ease of adjustment. Visual-pack. Design allows magnet to pivot so that it will always center squarely on the metal strike for maximum holding strength. Offers sturdy, permanent magnet in a nylon case. Slotted screw holes are for ease of adjustment. Visual-pack.
Amerock BP7128W Self-Closing Semi-Concealed Cabinet Hinge CATCH BULLET BRASS 3/8IN      Amerock BP792926 Self-Closing Variable Overlay Cabinet Hinge
3/8" inset. Use with five #6 O.H. x 5/8" type screws. 2-3/4"L x 2"W x 1/8"H. National Hardware Bullet Catch, Series: V1845, 3/8 in Bore, Steel, Bright Brass, For Cabinets, Chests and Doors Tested for durability in conditions exceeding all KCMA certification requirements and BHMS standards for cycle life, strength and finish quality. Reliable, self-closing power of dual compression springs. Use (2) #5 O.H. x 5/8" and (3) #5 F.H. x 1/2" screws. 2-3/4"L x 2"W x 3/4"H.
Amerock BP7929AE Self-Closing Imperial Variable Overlay Cabinet Hinge Amerock BP7928AE Self-Closing Imperial Cabinet Hinge Toolbasix 6298319-3L Drawer Lock
Tested for durability in conditions exceeding all KCMA certification requirements and BHMS standards for cycle life, strength and finish quality. Reliable, self-closing power of dual compression springs. Use (2) #5 O.H. x 5/8" and (3) #5 F.H. x 1/2" screws. 2-3/4"L x 2"W x 3/4"H. Amerock Cabinet Hinge, Self-Closing, Imperial, 5 Holes, 2-3/4 in Door Leaf Length, 2 in Door Leaf Width, Face Mounting, Steel, Antique Brass, BHMS Approved, KCMA Certified, With 3/8 in Inset, 19.05 mm Projection Alloy steel construction. Fits max 3/4" thick. For cabinet doors and desk drawers. 1.417" screw hole spacing. 2.04" overall width. Includes 2 keys and screws.
Knape & Vogt Designer 182 Shelf Bracket Knape & Vogt BK-0103-11 Shelf Bracket BRACKET SHELF DECO WHITE 6X6IN
Double-lug bracket design prevents shelves and contents from falling when bumped. Supports adjust to accommodate changes in storage and layout. Rounded corners and recessed groove design. Cover strips conceal screw holes and slots for a more refined appearance. Epoxy finish is resistant to chips and scratches. With fold out support for heavy duty loads. Load tested to 300 lbs. Heavy-duty steel construction.
Mintcraft 25213PHL Single Slot Shelf Standard SHELF STANDARD BRASSHD 4FT    SHELF STANDARD FRUITWOOD 4FT
Single track adjustable wall standard. Dimensions: 5/8"W x 7/16"H x selected length. For use with Pro Source shelving. UPC tagged. Mounts to the wall for surface or flush mounted applications. Predrilled nail and screw holes. Use with 158 Shelf Supports. 5/8" Wide, 3/16" Deep. Boxed loose barcoded. Mounts to the wall for surface or flush mounted applications. Predrilled nail and screw holes. Use with 158 Shelf Supports. 5/8" Wide, 3/16" Deep. Boxed loose barcoded.
SHELF STANDARD WHITE 4FT      Knape & Vogt BK-0102-14 Shelf Bracket Knape & Vogt Designer 182 Shelf Bracket
Mounts to the wall for surface or flush mounted applications. Predrilled nail and screw holes. Use with 158 Shelf Supports. 5/8" Wide, 3/16" Deep. Boxed loose barcoded. Designed to fit into the fast mount standards. Load tested to 150 lbs. Double-lug bracket design prevents shelves and contents from falling when bumped. Supports adjust to accommodate changes in storage and layout. Rounded corners and recessed groove design. Cover strips conceal screw holes and slots for a more refined appearance. Epoxy finish is resistant to chips and scratches.
SHELF STANDARD SILVER 6FT     Mintcraft 25202PHL Shelf Standard SOCKET MOUNTING SMV
SOCKET MOUNTING SMV
Our Price: $5.04
Mounts to the wall for surface or flush mounted applications. Predrilled nail and screw holes. Use with 158 Shelf Supports. 5/8" Wide, 3/16" Deep. Boxed loose barcoded. Adjustable dual track. 1pc. Dimensions: 1" H x 5/8: W x 25-1/2"L. For use with ProSource shelving. UPC tagged. Rustproof, Meets American Society Of Agricultural Engineers 5276.3 Certified SMV Emblem, & Federal & State Requirements. Product is highly durable and very easy to use. This product is manufactured in China.
Prime Line U 9947 Drawer and Cabinet Lock National Hardware 110BC Shelf Bracket Knape & Vogt 0202-10PM Shelf Standard
Keyed locking unit for added security. Fits 7/8" hole. 5/16" bolt throw. Includes 1 lock, 2 keys and installation screws. National Hardware Shelf Bracket, Series: 110BC, 10 in Length, 1.91 in Width, 8 in Depth, Steel, Zinc Plated, 35 lb Load Capacity, Suitable For Use With: National 110 Shelf Brackets, Includes: (12) No 7 x 3/4 in and 1-1/4 in Screws Knape & Vogt Shelf Standard, Heavy Duty, 10 in Length, 4.88 in Width, 3.88 in Depth
Knape & Vogt 0111-40 Horizontal Fast Mount Hang Track Amerock BP7550BB Self-Closing Partial Wrap Around Cabinet Hinge National Hardware V826 Adjustable Drawer Lock
DRAWER LOCKS BRS
Our Price: $5.49
Horizontal track to hang uprights, load tested to 400 lb. per screw on wall studs. Tested to 100 lb. per anchor on dry wall mount. Amerock Cabinet Hinge, Self-Closing, Partial Wrap Around, 3 Holes, 2-1/4 in Door Leaf Length, 1-3/4 in Door Leaf Width, Steel, Burnished Brass, BHMS Approved, KCMA Certified, 1/2 in Overlay National Hardware Drawer Lock, Adjustable, Series: V826, Suitable For Use With: 3/4 in Drawers, Keyed Key, Die Cast Zinc, Steel, Brass, For Residential Applications
National Hardware VKA826 Adjustable Drawer Lock Knape & Vogt BK-0103-14 Shelf Bracket Knape & Vogt 7980TI Standard Hang Rail Link
DRAWER LOCKS BRS
Our Price: $5.49
National Hardware Drawer Lock, Adjustable, Series: VKA826, Suitable For Use With: 3/4 in Drawers, Keyed Key, Die Cast Zinc, Steel, Brass, For Residential Applications With fold out support for heavy duty loads. Load tested to 300 lbs. Attaches to the top end of an 80 series wall standard to allow it to be hung on an installation hang rail. Packaged per pair with two links and two screws.
Slim-Line 215 Decorative Regular Duty Shelf L-Bracket Knape & Vogt 0202-14PM Shelf Standard Stanley 234401 L-Shaped Shelf Bracket
Made of heavy-duty steel covered with high-impact plastic. Italian design. Functional and attractive. Knape & Vogt Shelf Standard, Heavy Duty, 14 in Length, 4.88 in Width, 3.88 in Depth Designed for mounting shelves in closets and storage rooms. Brackets are punched for #12 wood screws. Safe Working Load: 150 lbs. Boxed.
Schlage C905 Middle Butt Cabinet Hinge ShelfTrack 2853 Shelf Bracket Knape & Vogt 80 BLK 72 Regular Duty Single Slot Shelf Standard
Bright Brass Finish. For use with ShelfTrack system. Locks the wire shelf to the vertical wall standard for added safety. Keeps shelves from being pushed up and unlocked accidentally. Works with ventilated shelving. 1/2" width. For use with the 180 Series brackets. Standards can be mounted to nearly any type of wall. Reinforced brackets lock into slotted standard for strong, secure weight-bearing support. Fully adjustable 1" increments. 16-gauge steel construction. Dimension 5/8" wide x 13/32" high x selected length.
Prime Line U 9945 Drawer and Cabinet Lock Prime Line U 9946 Drawer and Cabinet Lock National Hardware 110BC Shelf Bracket
Stainless steel face. Plated diecast housing and steel cams can be mounted to metal or wood doors and drawers from 13/16" thick. 1-1/8"D x 2"L. Keyed locking for maximum security. Uses Yale Y-13 keyway. Includes 1 lock, 3 cams, 1 trim collar, 1 spur washer, 2 rotation washers, 1 lock nut, and 2 keys. Plated die-cast housing and steel cams can be mounted to metal or wood door/drawer from 1/2" to 1" thick. Keyed locking for maximum security. Includes 1 each; lock, trim collar, spur washer and lock nut, 3 each; cams, rotation washers and keys. Prefix U on factory number denotes new Defender Security packaging. National Hardware Shelf Bracket, Series: 110BC, 12 in Length, 1.87 in Width, 10 in Depth, Steel, Zinc Plated, 35 lb Load Capacity, Suitable For Use With: National 110 Shelf Brackets, Includes: (12) No 7 x 3/4 in and 1-1/4 in Screws
BRACKET SHELF DECO BLACK 6X6IN Prime Line U 9940 Mailbox Lock Stanley 229393 Decorative Shelf Bracket
Heavy-duty steel construction. Diecast 3/4" cylinder with brass front plate, brass pins and spring steel locking clip. Multi-cam assortment to eliminate stocking individual locks. Replaces American, Florence, Miami-Carey, Bommer and Auth cams. All cylinders rotate 90 degrees counter clockwise to open. Includes 5 cams, 1 each with 2 keys. Prefix U on factory number denotes new Defender Security packaging. Sp152bc - Stock-Pac Loose.
LOCK SHOWCASE CHM 4-1/2IN     National Hardware VKA828 Adjustable Showcase Lock National Hardware N229-401 Ornamental Shelf Bracket
SHOWCASE LOCKS CHROME
Our Price: $6.23
Locks display cases, showcase doors and all sliding glass, wood or metal doors up to 1/4" thick. Die-cast zinc lock body; steel locking bar; and solid brass keyway and tumblers. National Hardware Showcase Lock, Adjustable, Series: VKA828, Suitable For Use With: 1/4 in Thickness Doors, Keyed Alike Key, 4-1/2 in Crossbore, Tumbler Lock Pin, Steel Bar, Die Cast Zinc Body, Solid Brass Keyway, Chrome Plated, For Residential and Locks Display Cases, Showcase Doors and All Sliding Glass, Wood or Metal National Hardware Shelf Bracket, Ornamental, Series: 152BC, 5 in Length, 3-1/2 in Depth, 0.1 in Thickness, Steel, Antique Bronze, 80 lb Load Capacity, Includes: Swivel Hook for 360 deg Plant Growth, For Indoor/Outdoor Applications
National Hardware N229-385 Ornamental Shelf Bracket SHELF STANDARD BRASSHD 6FT    SHELF STANDARD FRUITWOOD 6FT
National Hardware Shelf Bracket, Ornamental, Series: 152BC, 5 in Length, 3-1/2 in Depth, 0.1 in Thickness, Steel, Antique White, 80 lb Load Capacity, Includes: Swivel Hook for 360 deg Plant Growth, For Indoor/Outdoor Applications Mounts to the wall for surface or flush mounted applications. Predrilled nail and screw holes. Use with 158 Shelf Supports. 5/8" Wide, 3/16" Deep. Boxed loose barcoded. Mounts to the wall for surface or flush mounted applications. Predrilled nail and screw holes. Use with 158 Shelf Supports. 5/8" Wide, 3/16" Deep. Boxed loose barcoded.
SHELF STANDARD WHITE 6FT      BRACKET SHELF DECO WHITE 8X8IN National Hardware N183-756 Adjustable Utility Lock
Mounts to the wall for surface or flush mounted applications. Predrilled nail and screw holes. Use with 158 Shelf Supports. 5/8" Wide, 3/16" Deep. Boxed loose barcoded. Heavy-duty steel construction. National Hardware Utility Lock, Adjustable, Series: V825, Suitable For Use With: Locking Wood or Metal Cabinet Doors and Drawers, Different Key, 2 Keys, Y13 Yale, B1 Cole Keyway, 1/4 in Crossbore, 2.33 in Overall Length, 0.62 in Overall Width, 0.89 in Overall Depth, Die Cast Zinc, Steel, Chrome Plated, ANSI E07262, BHMA A156.11
National Hardware V826 Adjustable Utility Lock National Hardware N192-476 Adjustable Utility Lock National Hardware N192-484 Adjustable Utility Lock
National Hardware Utility Lock, Adjustable, Series: V826, Suitable For Use With: Locking Wood or Metal Cabinet Doors and Drawers, Different Key, 2 Keys, Y13 Yale, B1 Cole Keyway, 1/2 in Crossbore, 2.33 in Overall Length, 0.62 in Overall Width, 1.15 in Overall Depth, Die Cast Zinc, Steel, Chrome Plated, ANSI E07262, BHMA A156.11 National Hardware Utility Lock, Adjustable, Series: V825, Suitable For Use With: Locking Wood or Metal Cabinet Doors and Drawers, Different Key, Y13 Yale, B1 Cole Keyway, 3/4 in Crossbore, Die Cast Zinc, Steel, Chrome Plated, For Residential Applications National Hardware Utility Lock, Adjustable, Series: VKA825, Suitable For Use With: Locking Wood or Metal Cabinet Doors and Drawers, Keyed Alike Key, 2 Keys, Y13 Yale, B1 Cole Keyway, 3/4 in Crossbore, 2.33 in Overall Length, 0.62 in Overall Width, 1.39 in Overall Depth, Die Cast Zinc, Steel, Chrome Plated, ANSI E07262, BHMA A156.11
National Hardware N239-152 Adjustable Utility Lock LOCK UTILITY BRASS 1/4IN      National Hardware N185-272 Adjustable Utility Lock
UTILITY LOCKS 1/4IN BRS
Our Price: $6.34
UTILITY LOCKS 1/4IN BRS
Our Price: $6.34
National Hardware Utility Lock, Adjustable, Series: VKA825, Suitable For Use With: Locking Wood or Metal Cabinet Doors and Drawers, Keyed Alike Key, 2 Keys, Y13 Yale, B1 Cole Keyway, 1/4 in Crossbore, Die Cast Zinc, Steel, Brass, For Residential Applications National Hardware Door/Drawer Utility Lock, Series: V825, Different Key, Key Number: Yale Y13 or Cole B1, 1/4 in Crossbore, Steel/Die-Cast Zinc, Brass, Includes: (2) Keys, Standards: ANSI Specified, BHMA A156.11, For Locking Wood or Metal Cabinet Doors and Drawers National Hardware Utility Lock, Adjustable, Series: VKA825, Suitable For Use With: Locking Wood or Metal Cabinet Doors and Drawers, Keyed Alike Key, Y13 Yale, B1 Cole Keyway, 1/4 in Crossbore, Die Cast Zinc, Steel, Black, Chrome Plated, For Residential Applications
National Hardware N185-280 Adjustable Utility Lock Prime Line U-9945KA Drawer and Cabinet Lock Knape & Vogt 7982WH Standard Link
National Hardware Utility Lock, Adjustable, Series: VKA825, Suitable For Use With: Locking Wood or Metal Cabinet Doors and Drawers, Keyed Alike Key, Y13 Yale, B1 Cole Keyway, 1/2 in Crossbore, Die Cast Zinc, Steel, Black, Chrome Plated, For Residential Applications Stainless steel face. Plated diecast housing and steel cams can be mounted to metal or wood doors and drawers from 13/16" thick. 1-1/8"D x 2"L. Keyed locking for maximum security. Uses Yale Y-13 keyway. Includes 1 lock, 3 cams, 1 trim collar, 1 spur washer, 2 rotation washers, 1 lock nut, and 2 keys. Attaches to the top end of an 82 series wall standard to allow it to be hung on an installation hang rail. Hold up to 900 lbs per pair (when installed on 16" stud centers). Packaged in pairs with two links and two screws. Polybagged.
Toolbasix 6298343-3L Showcase Lock Amerock BP7565BB Self-Closing Partial Wrap Around Cabinet Hinge BLADE SUPPORT SMV
BLADE SUPPORT SMV
Our Price: $6.50
Fits up to 1/4" thick metal, wood, or sliding glass, gun case and showcase doors. Includes keys. Amerock Cabinet Hinge, Self-Closing, Partial Wrap Around, 3 Holes, 2-1/4 in Door Leaf Length, 1-3/4 in Door Leaf Width, Face Mounting, Steel, Burnished Brass, With 3/8 in Inset, 19.05 mm Projection Used to make sure that everyone sees your sign. Spade mounting bracket allows for easy transfer of steel emblem from one piece of equipment to another; socket and bolts sold separately.
Amerock BP7329G9 Self-Closing Variable Overlay Cabinet Hinge National Hardware N239-178 Adjustable Utility Lock LOCK UTILITY BRASS 1/2IN
UTILITY LOCKS 1/2IN BRS
Our Price: $6.57
UTILITY LOCKS 1/2IN BRS
Our Price: $6.57
Tested for durability in conditions exceeding all KCMA certification requirements and BHMS standards for cycle life, strength and finish quality. Reliable, self-closing power of dual compression springs. Use (2) #5 O.H. x 5/8" and (3) #5 F.H. x 1/2" screws. 2-3/4"L x 2"W x 3/4"H. National Hardware Utility Lock, Adjustable, Series: VKA825, Suitable For Use With: Locking Wood or Metal Cabinet Doors and Drawers, Keyed Alike Key, 2 Keys, Y13 Yale, B1 Cole Keyway, 1/2 in Crossbore, Die Cast Zinc, Steel, Brass, For Residential Applications National Hardware Door/Drawer Utility Lock, Series: V825, Different Key, Key Number: Yale Y13 or Cole B1, 1/2 in Crossbore, Steel/Die-Cast Zinc, Brass, Includes: (2) Keys, Standards: ANSI Specified, BHMA A156.11, For Locking Wood or Metal Cabinet Doors and Drawers
National Hardware N239-194 Adjustable Utility Lock LOCK UTILITY BRASS 3/4IN      CATCH DOUBLE ROLLER ZINC 10PK
UTILITY LOCKS 3/4IN BRS
Our Price: $6.73
National Hardware Utility Lock, Adjustable, Series: VKA825, Suitable For Use With: Locking Wood or Metal Cabinet Doors and Drawers, Keyed Alike Key, 2 Keys, Y13 Yale, B1 Cole Keyway, 3/4 in Crossbore, 2.33 in Overall Length, 0.62 in Overall Width, 1.39 in Overall Depth, Die Cast Zinc, Steel, Brass, ANSI E07262, BHMA A156.11 Fits max 3/4" thick. Designed for locking wood or metal cabinet doors and drawers. Yale Y13 or Cole B1 key blank. Die-cast zinc body. Bar, face plate and parts made of steel. Visual-pack. Polybagged.
Amerock BP7328G9 Self-Closing Cabinet Hinge Prime-Line U 9950KA Drawer and Cabinet Lock Prime Line U 9942 Drawer and Cabinet Lock
Amerock Cabinet Hinge, Self-Closing, 3 Holes, 2-3/4 in Door Leaf Length, 2 in Door Leaf Width, Face Mounting, Steel, Sterling Nickel, BHMS Approved, KCMA Certified, With 3/8 in Inset 3/4" diameter, 1-3/8" lock fits up to a 1" thick door panel. Complete with 3 cam assortment. 90 and 180 degree rotation washers included. Plated die-cast housing and steel cams can be mounted to metal or wood door/drawer from 1/2" to 1" thick. Keyed locking for maximum security. Includes 1 each; lock, trim collar, spur washer and lock nut, 3 each; cams, rotation washers and keys. Prefix U on factory number denotes new Defender Security packaging.
Prime Line U-9941KA Cam Lock Schlage BP3473PT Double Pole Magnet Catch National Hardware 110BC Shelf Bracket
Stainless steel face. Plated diecast housing and steel cams can be mounted to metal or wood doors and drawers from 5/16" thick. 5/8"D x 2"L. Keyed locking for maximum security. Uses Yale Y-11 keyway. Includes 1 lock, 3 cams, 1 trim collar, 1 spur washer, 2 rotation washers, 1 lock nut, and 2 keys. Can be surface mounted or mortised. Size: 3-1/8" x 1" x 9/16". Packed with installation instructions, sheet metal screws, and 2 short strikes. Slim-pack polybagged. National Hardware Shelf Bracket, Series: 110BC, 14 in Length, 1.93 in Width, 12 in Depth, Steel, Zinc Plated, 35 lb Load Capacity, Suitable For Use With: National 110 Shelf Brackets, Includes: (12) No 7 x 3/4 in and 1-1/4 in Screws
Prime-Line U 9953KA Drawer and Cabinet Lock Knape & Vogt Designer 182 Shelf Bracket BRACKET SHELF DECO BLK 8X8IN
3/4" diameter, 1-3/8" lock fits up to a 1" thick door panel. Complete with 3 cam assortment. 90 and 180 degree rotation washers included. Double-lug bracket design prevents shelves and contents from falling when bumped. Supports adjust to accommodate changes in storage and layout. Rounded corners and recessed groove design. Cover strips conceal screw holes and slots for a more refined appearance. Epoxy finish is resistant to chips and scratches. Heavy-duty steel construction.
BRACKET SHELF DECO SAT NIC 6X6 Prime Line U-9943KA Cam Lock Knape & Vogt BK-0103-22 Shelf Bracket
Heavy-duty steel construction. Stainless steel face. Plated diecast housing and steel cams can be mounted to metal or wood doors and drawers from 9/16" thick. 7/8"D x 2"L. Keyed locking for maximum security. Uses Yale Y-11 keyway. Includes 1 lock, 3 cams, 1 trim collar, 1 spur washer, 2 rotation washers, 1 lock nut, and 2 keys. With fold out support for heavy duty loads. Load tested to 300 lbs.
Prime Line U-9947KA Cam Lock Prime Line U 9944 Drawer and Cabinet Lock Mintcraft 25214PHL Single Slot Shelf Standard
Keyed locking unit for added security. Fits 7/8" hole. 5/16" bolt throw. Includes 1 lock, 2 keys and installation screws. Plated die-cast housing and steel cams can be mounted to metal or wood door/drawer from 1/2" to 1" thick. Keyed locking for maximum security. Includes 1 each; lock, trim collar, spur washer and lock nut, 3 each; cams, rotation washers and keys. Prefix U on factory number denotes new Defender Security packaging. Single track adjustable wall standard. Dimensions: 5/8"W x 7/16"H x selected length. For use with Pro Source shelving. UPC tagged.
Prime Line S-4648 Mail Box Lock National Hardware V628 Flush/Full Inset Cabinet Spring Hinge Prime Line S-4634 Mail Box Lock
SPRING HINGES 2IN BRS
Our Price: $7.98
Fits Bommer, Auth-Electric, and United. 7/8" diameter threaded body. Used on pedestal style mail boxes. Includes (1) 5 pin cylinder, 1 lock, 3 cams, attachment nut, and 2 keys. National Hardware Cabinet Spring Hinge, Flush/Full Inset, Series: V628, 6 Holes, 0.14 in Hole Diameter, 0.04 in Leaf Thickness, 1.91 in Door Leaf Length, 1.91 in Frame Leaf Length, Removable Pin, 0.56 in Diameter Pin, Surface, Wall Mounting, 2.27 in Overall Width, 0.56 in Overall Depth, Steel, Brass Multi-purpose lock. Key will not remove in unlocked position. Uses Hudson keyway; ILCO 1562 (98X). Includes (1) 5 pin cylinder, 1 clip, 5 cams, and 2 keys.
Mintcraft 25203PHL Dual Slot Shelf Standard Prime-Line S 4533 Mail Box Lock With Cover National Hardware V529 Cabinet Hinge
CABINET HINGES 2IN BRS
Our Price: $8.14
Adjustable dual track. 1pc. Dimensions: 1" H x 5/8: W x 25-1/2"L. For use with ProSource shelving. UPC tagged. 5 cam selection. Includes dust cover face for exterior application. Uses Hudson keyway, and turns 90? clockwise to open. National Hardware Cabinet Hinge, Series: V529, 4 Holes, 0.23 in Hole Diameter, 0.06 in Leaf Thickness, 2 in Door Leaf Length, 2 in Frame Leaf Length, 0.13 in Diameter Pin, 10 lb Load Capacity, 1.56 in Overall Width, Steel, Brass
Knape & Vogt 0203-14PM Shelf Bracket Knape & Vogt 82 Twin Slot Standard Hy-Ko 701 Highway Sign
Wood shelf brackets hold up to 500 lbs. each. Durable platinum powder coat finish. Diamond plate stamped surface. Solid steel construction. Features twice the slots for more strength. Two 10-1/2" brackets mounted to twin-slotted standards support up to 300 pounds per shelf when installed according to manufacturer's directions. Red and black letters on white background. Sign states "TENANT PARKING ONLY UNAUTHORIZED VEHICLES WILL BE TOWED AWAY AT VEHICLE OWNERS EXPENSE".
Hy-Ko 702 Highway Sign Hy-Ko 700 Highway Sign National Hardware V529 Cabinet Hinge
Red and black letters on white background. Sign states "NO PARKING UNAUTHORIZED VEHICLES WILL BE TOWED AWAY AT VEHICLE OWNERS EXPENSE". Red and black letters on white background. Sign states "CUSTOMER PARKING UNAUTHORIZED VEHICLES WILL BE TOWED AWAY AT VEHICLE OWNERS EXPENSE". National Hardware Cabinet Hinge, Series: V529, 6 Holes, 0.23 in Hole Diameter, 0.06 in Leaf Thickness, 2-1/2 in Door Leaf Length, 2-1/2 in Frame Leaf Length, 0.13 in Diameter Pin, 20 lb Load Capacity, 1.68 in Overall Width, Steel, Brass
ShelfTrack 2854 Shelf Bracket Stanley 229450 Decorative Shelf Bracket National Hardware N229-468 Ornamental Shelf Bracket
For use with ShelfTrack system. Locks the wire shelf to the vertical wall standard for added safety. Keeps shelves from being pushed up and unlocked accidentally. Works with ventilated shelving. 1/2" width. Sp152bc - Stock-Pac Loose. National Hardware Shelf Bracket, Ornamental, Series: 152BC, 10 in Length, 7 in Depth, 0.1 in Thickness, Steel, Antique Bronze, 100 lb Load Capacity, Includes: Swivel Hook for 360 deg Plant Growth, For Indoor/Outdoor Applications
National Hardware N229-443 Ornamental Shelf Bracket Valley Forge USS-1 USA Flag National Hardware V529 Cabinet Hinge
CABINET HINGES 3IN BRS
Our Price: $9.57
National Hardware Shelf Bracket, Ornamental, Series: 152BC, 10 in Length, 7 in Depth, 0.1 in Thickness, Steel, Antique White, 100 lb Load Capacity, Includes: Swivel Hook for 360 deg Plant Growth, For Indoor/Outdoor Applications 100% made in U.S.A. Printed 50 percent cotton and 50 percent polyester - retains color, and has brass grommets in canvas heading for durability. Flag is fade resistant. National Hardware Cabinet Hinge, Series: V529, 6 Holes, 1/4 in Hole Diameter, 0.07 in Leaf Thickness, 3 in Door Leaf Length, 3 in Frame Leaf Length, 0.16 in Diameter Pin, 28 lb Load Capacity, 2.06 in Overall Width, Steel, Brass
Stanley 229427 Decorative Shelf Bracket National Hardware N229-435 Ornamental Shelf Bracket National Hardware N229-419 Ornamental Shelf Bracket
Sp152bc - Stock-Pac Loose. National Hardware Shelf Bracket, Ornamental, Series: 152BC, 8 in Length, 5-1/2 in Depth, 0.1 in Thickness, Steel, Antique Bronze, 80 lb Load Capacity, Includes: Swivel Hook for 360 deg Plant Growth, For Indoor/Outdoor Applications National Hardware Shelf Bracket, Ornamental, Series: 152BC, 8 in Length, 5-1/2 in Depth, 0.1 in Thickness, Steel, Antique White, 80 lb Load Capacity, Includes: Swivel Hook for 360 deg Plant Growth, For Indoor/Outdoor Applications
Knape & Vogt 0203-20PM Shelf Bracket Schlage BP32301BR Triple Pole Magnet Catch BRACKET SHELF DECO SAT NIC 8X8
Wood shelf brackets hold up to 500 lbs. each. Durable platinum powder coat finish. Diamond plate stamped surface. Solid steel construction. 2 sets of 3 magnets for strong hold. Can be surface mounted or mortised. Size: 3-1/8" x 1" x 3/4". Packed with installation instructions, sheet metal screws and 2 short strikes. Slim-pack polybagged.
HINGE INSET 3/8IN SATIN NICKEL ShelfTrack 2855 Shelf Bracket Mintcraft 25204PHL Dual Slot Shelf Standard
For use with ShelfTrack system. Locks the wire shelf to the vertical wall standard for added safety. Keeps shelves from being pushed up and unlocked accidentally. Works with ventilated shelving. 1/2" width. Adjustable dual track. 1pc. Dimensions: 1" H x 5/8: W x 25-1/2"L. For use with ProSource shelving. UPC tagged.
OVERLAY HINGE VARI SAT NICKEL Valley Forge 99000-1 USA Flag Valley Forge US1-1 PVC Bagged USA Flag Kit
3/8" inset. Use with five #6 O.H. x 5/8" type screws. 2-3/4"L x 2"W x 1/8"H. 100% made in USA. Good quality, color-fast printed poly cotton. Light-weight fast drying. Sewn sleeved pole hem also fits most 5 ft. poles. Kit is 100% made in USA. Poly cotton printed flag is durable, retains color, looks good, and easilymountedto3-sectionsteelpole. Each set includes 3? x 5? flag, 6? pole -3/4? pole diameter, and  accessories. Comes in display/shipper carton.
Valley Forge PMF Pleated Mini Fan Flag with Stars FLAG USA GARDEN 12X18IN COTTON BRACKET SHELF 4INX5IN GRAY
100 % made in USA. Ready to hang with folded pleats either outdoors or indoors. 5 stripes printed in red, white and blue, with stars. Canvas heading with brass grommets for durability. 100% Made in U.S.A. Garden flag with sewn stripes and embroidered stars. USGF-C does not come with a garden flag pole/holder. Powder coated steel. Less screws - UPC labeled.
BRACKET SHELF 5INX6IN GRAY    BRACKET SHELF FLDG WHITE 12IN Hy-Ko HW Highway Sign
Powder coated steel. Less screws - UPC labeled. Bracket can be folded for quick and easy storage. Safe working load 35 lbs. Visual-pack. Red and white sign states "PRIVATE PROPERTY NO TRESPASSING VIOLATORS WILL BE PROSECUTED." Pre-punched mounting holes.
Hy-Ko HW Highway Sign