Home > HARDWARE > GENERAL HARDWARE > SHELVING & CLOSET
Choose a sub category:
AMERICAN FLAGS AMERICAN FLAGS SHELF BRACKETS
FLAG BRACKETS / POLES FLAG BRACKETS / POLES SHELF BRACKETS - HEAVY DUTY
SHELF BRACKETS - WOOD SHELF KITS SHELF STANDARDS
SHELF BRACKETS FOR STANDARDS SHELF NAILS/SCREWS SHELF SUPPORTS
PRE-FINISHED SHELVES VENTILATED SHELVING VENTILATED SHELVING MOUNTING
VENTILATED SHELVING ACCESSORI VENTILATED SHELVING KITS VENTILATED STORAGE SHLVS/CARTS
METAL SHELVING GLASS SHELVING CLOSET ROD BRACKETS
CLOSET POLE SOCKETS CLOSET RODS CLOSET SYSTEMS
CLOSET ACCESSORIES
Sort By:
1
SUPPORT WHITE                 National Hardware N116-475 Shelf Support SUPPORT BRASS
SUPPORTS BRONZE
Our Price: $0.38
Used to support shelves. 1/4" diameter shank. Safe working load 25 lbs. Boxed loose. National Hardware Shelf Support, Series: 158, 0.62 in Width, 0.05 in Thickness, Steel, Bronze, 25 lb Load Capacity, Suitable For Use With: National 157 Shelf Standards, 0.14 in Hole Diameter, For Supporting Shelves Used to support shelves. Can be used with National 157 shelf standards. Safe working load 25 lbs. Boxed loose.
National Hardware N224-675 Shelf Support National Hardware MPB107 Pole Socket Set National Hardware V108S Pole Socket Screw
SUPPORTS BRASS
Our Price: $0.41
SCREWS WHITE
Our Price: $1.27
National Hardware Shelf Support, Series: 159, 1/4 in Shank Diameter, 1.22 in Length, 1/2 in Width, 0.05 in Thickness, Steel, Brass, 25 lb Load Capacity, 0.16 in Hole Diameter, For Supporting Shelves National Hardware Pole Socket Set, Series: MPB107, 0.8 in Depth, 0.13 in Thickness, Polypropylene, White, 90 lb Load Capacity, Suitable For Use With: Upto 1-3/8 in Diameter Pole, Includes: (1) Socket Pair Per Pack and Fasteners, For used to mount wood closet poles National Hardware Pole Socket Screw, Series: V108S, NO 12 Screw, 1-1/2 in Length, Round Head, Phillips Drive, Steel, White, BHMA A138.18
Stanley 218941 Utility Shelf Bracket National Hardware 110BC Shelf Bracket National Hardware V211S Bracket Screw
Can be used as a support or brace. Strengths exceed ANSI/BHMA standards. Brackets are designed for use with standard dimensional lumber. First measurement indicates nominal width of shelf leg; second measurement denotes nominal length of wall leg. Bulk pak. National Hardware Shelf Bracket, Series: 110BC, 4 in Length, 1.37 in Width, 3 in Depth, Steel, Zinc Plated, 10 lb Load Capacity, Suitable For Use With: National 110 Shelf Brackets, Includes: (12) No 7 x 3/4 in and 1-1/4 in Screws National Hardware Bracket Screw, Series: V211S, NO 7 Screw, 1-1/4 in Length, 1/2 in Drive, Steel, Zinc Plated, BHMA A138.18
SCREW BRCKT ZINC PLATED       SCREW BRCKT FRTWD 12PK        National Hardware V152S Bracket Screw
SHELF BRACKETS ANT WHT
Our Price: $1.59
For brackets. #7 x 3/4? & 1-1/4?. Visual-pack. Designed to attach National model No. 211 brackets to walls and shelves. 6 each No. 7 x 1-1/2" and 6 each No. 7 x 1/2" per pack. Visual-pack. National Hardware Bracket Screw, Series: V152S, NO 7 Screw, 1/2 - 1-1/2 in Length, Truss Head, Phillips Drive, Steel, Antique White
BRACKET SHELF ANT BRNZ        BRACKET SHELF ANT BLACK       SuperSlide 948 Pre-Loaded Wall Bracket
SHELF BRACKETS ANT BRNZ
Our Price: $1.59
SHELF BRACKETS ANT BLK
Our Price: $1.59
Designed for mounting National's #152 brackets. Phillips truss screws, 4 each of 7 x 1/2 and 7 x 1-1/2 inch. Visual-pack. Designed for mounting National's #152 brackets. Phillips truss screws, 4 each of 7 x 1/2 and 7 x 1-1/2 inch. Visual-pack. Secures shelf to side wall of closet. Pre-loaded with pins and anchors, no screws needed. Accommodates pole clips and shelf stops in "TotalSlide" system.
SCREW BRCKT BLACK 12PK        National Hardware V211S Bracket Screw National Hardware BPB107 Pole Socket Set
Designed to attach National model No. 211 brackets to walls and shelves. 6 each No. 7 x 1-1/2" and 6 each No. 7 x 1/2" per pack. Visual-pack. National Hardware Bracket Screw, Series: V211S, NO 7 Screw, 1-1/4 in Length, 1/2 in Drive, Steel, White National Hardware Pole Socket Set, Series: BPB107, 0.8 in Depth, 0.13 in Thickness, Polypropylene, White, 90 lb Load Capacity, Suitable For Use With: Upto 1-3/8 in Diameter Pole, Includes: (1) Socket Pair Per Pack and Fasteners, 0.19 in Hole Diameter, For used to mount wood closet poles
Closetmaid 01016 End Cap SuperSlide 5629 Closet Rod Support National Hardware 110BC Shelf Bracket
Vinyl end cap provides protection from cut end of wire shelving that exposes possible rough edges. Large end caps cover the large rod, 0 gauge, .25"H x .4"W x .4"D. Small end caps are for the 4 gauge wire, .2"H x .2"W x .2"D. Designed to be used with ClosetMaid - Shelf & Rod shelving. SuperSlide shelving and hardware allows hangers to slide freely on both Fixed Mount and ShelfTrack mounting systems. Hangers slide without interruption. Snaps onto SuperSlide shelf to support hang rod. Use one every 36 in. of hang rod and at each end of shelf and hang rod. 5.75"H x 0.87"W x 3.87"D. Material: Resin National Hardware Shelf Bracket, Series: 110BC, 5 in Length, 1.34 in Width, 4 in Depth, Steel, Zinc Plated, 10 lb Load Capacity, Suitable For Use With: National 110 Shelf Brackets, Includes: (12) No 7 x 3/4 in and 1-1/4 in Screws
SOCKET METAL POLE SAT BRS BG  SOCKET PLASTIC POLE WHITE BG  Knape & Vogt 255 Adjustable Shelf Standard
Fits up to 1-3/8" in diameter. Includes one pair of pole sockets and screws. Fits up to 1-3/8" in diameter. Reinforced design allows for interior and exterior uses.  Single screw mounting. Includes one pair of pole sockets and screws. Pilasters for built-in shelving and book case applications. Adjustable on 1/2" centers. 23 gauge high-strength steel, 5/8" wide x 3/16" deep.
Prime Line N 6568 Pole Socket BRACKET SHELF HD WHITE 8IN    Knape & Vogt 180 Regular Duty Shelf Bracket
Accepts a 1-3/8" diameter standard wood pole. 2-3/16"OD x 3/4" overall. Includes one pair of pole sockets and two No.8 x 3/4" Phillips flat head screws. Dimensions: 1/16"W x 2-3/8"H x selected depth. For use with Pro Source shelving. UPC tagged. For use with the 80 Series standards. For shelving applications in light industrial, commercial, and residential use. Standards can be mounted to nearly any type of wall. For storage and display applications in retail stores, grocery stores, light warehouses, repair garages, maintenance storage, business office storage, and residential storage. Reinforced brackets lock into slotted standards for strong, secure weight-bearing support. Fully adjustable in 1" increments. 16-gauge cold rolled steel construction. Tested to meet or exceed ANSI performance standards as established by BHMA.
Knape & Vogt 180 Boltless Regular Duty Shelf Bracket National Hardware BPB105 Pole Socket Set Knape & Vogt CD-0019 Closet Pole End Cap
POLE SOCKETS BRS
Our Price: $2.33
For use with the 80 Series standards. For shelving applications in light industrial, commercial, and residential use. Standards can be mounted to nearly any type of wall. For storage and display applications in retail stores, grocery stores, light warehouses, repair garages, maintenance storage, business office storage, and residential storage. Reinforced brackets lock into slotted standards for strong, secure weight-bearing support. Fully adjustable in 1" increments. 16-gauge cold rolled steel construction. Tested to meet or exceed ANSI performance standards as established by BHMA. National Hardware Pole Socket Set, Series: BPB105, 0.38 in Depth, 0.02 in Thickness, Steel, Brass, 400 lb Load Capacity, Suitable For Use With: Upto a 1-3/8 in Diameter Pole, Includes: (1) Socket Pair Per Pack and Fasteners, For Mount Wood Closet Poles Covers up pole ends, keeps hangers from sliding off, friction fit. For use with 1-1/4" diameter pole (except 0023 uses 1" diameter pole).
Hy-Ko SS Weatherproof Identification Sign National Hardware 110BC Shelf Bracket Knape & Vogt BK-0101 Shelf Bracket
All aluminum white with red letters. Weather-resistant and durable. Sign states "EXIT" National Hardware Shelf Bracket, Series: 110BC, 6 in Length, 1.4 in Width, 5 in Depth, Steel, Zinc Plated, 25 lb Load Capacity, Suitable For Use With: National 110 Shelf Brackets, Includes: (12) No 7 x 3/4 in and 1-1/4 in Screws Designed to fit into the fast mount standards, load tested to 100 lbs.
SCREW MOUNTING CHM FIN        SCREW MOUNTING ORB FIN        SCREW MOUNTING WHITE
MOUNTING SCREWS WHT
Our Price: $2.37
Allows installation of 2 shelf and rod brackets to the wall and 1 shelf to the brackets. Four 1-1/2" pan head screws for mounting brackets to the wall. Four 3/4" pan head screws for mounting shelf to the brackets. For best use install in wall studs. For use with 108 shelf & rod bracket. Allows installation of 2 shelf and rod brackets to the wall and 1 shelf to the brackets. Four 1-1/2" pan head screws for mounting brackets to the wall. Four 3/4" pan head screws for mounting shelf to the brackets. For best use install in wall studs. For use with 108 shelf & rod bracket. Allows installation of 2 shelf and rod brackets to the wall and 1 shelf to the brackets. Four 1-1/2" pan head screws for mounting brackets to the wall. Four 3/4" pan head screws for mounting shelf to the brackets. For best use install in wall studs. For use with 108 shelf & rod bracket.
National Hardware V107 Pole Socket Set Knape & Vogt PK255 BR 36 Standard Pilaster Prime Line U 9335 Spoon Shelf Support Peg
National Hardware Pole Socket Set, Series: V107, 0.8 in Depth, 0.13 in Thickness, Polypropylene, White, 90 lb Load Capacity, Suitable For Use With: Upto 1-3/8 in Diameter Pole, Includes: (1) Socket Pair Per Pack and Fasteners, 0.19 in Hole Diameter, For used to mount wood closet poles Pilasters for built-in shelving and book case applications. Adjustable on 1/2" centers. 23 gauge high-strength steel, 5/8" wide x 3/16" deep. For use with cabinets and storage cabinets with glass shelves.
SOCKET PLASTIC POLE WHITE CD  Knape & Vogt 180 Regular Duty Shelf Bracket SOCKET WOOD POLE NAT WD 1-3/8
Fits up to 1-3/8" in diameter. Reinforced design allows for interior and exterior uses.  Single screw mounting. Includes one pair of pole sockets and screws. For use with the 80 Series standards. For shelving applications in light industrial, commercial, and residential use. Standards can be mounted to nearly any type of wall. For storage and display applications in retail stores, grocery stores, light warehouses, repair garages, maintenance storage, business office storage, and residential storage. Reinforced brackets lock into slotted standards for strong, secure weight-bearing support. Fully adjustable in 1" increments. 16-gauge cold rolled steel construction. Tested to meet or exceed ANSI performance standards as established by BHMA. 1-3/8" diameter. Single screw mounting. Includes two pcs of .75" screws and pole sockets.
Closetmaid 1164XBJ Support Bracket Knape & Vogt 80-88D PWH Standard Shelf Screw Knape & Vogt CD-0242-PM Wall Mount Shelf Standard
Closetmaid Support Bracket, 12 in Length, 2 in Width, 2 in Depth, Steel, Epoxy Coated, White, Suitable For Use With: Wire Shelving, Includes: (2) Brackets, (2) Anchors, (2) NO 8 Pins Screws are 1-1/2" long with a #8 body and #6 head. Screw pack for heavyweight wall standard, (14) 2-1/2" Screws.
Knape & Vogt 80-88DP ANO Standard Shelf Screw Knape & Vogt 180 Boltless Regular Duty Shelf Bracket Knape & Vogt 180 Boltless Regular Duty Shelf Bracket
Screws are 1-1/2" long with a #8 body and #6 head. For use with the 80 Series standards. For shelving applications in light industrial, commercial, and residential use. Standards can be mounted to nearly any type of wall. For storage and display applications in retail stores, grocery stores, light warehouses, repair garages, maintenance storage, business office storage, and residential storage. Reinforced brackets lock into slotted standards for strong, secure weight-bearing support. Fully adjustable in 1" increments. 16-gauge cold rolled steel construction. Tested to meet or exceed ANSI performance standards as established by BHMA. For use with the 80 Series standards. For shelving applications in light industrial, commercial, and residential use. Standards can be mounted to nearly any type of wall. For storage and display applications in retail stores, grocery stores, light warehouses, repair garages, maintenance storage, business office storage, and residential storage. Reinforced brackets lock into slotted standards for strong, secure weight-bearing support. Fully adjustable in 1" increments. 16-gauge cold rolled steel construction. Tested to meet or exceed ANSI performance standards as established by BHMA.
Knape & Vogt 180 Regular Duty Shelf Bracket SOCKET METAL POLE SAT BRS CD  Knape & Vogt 180 Regular Duty Shelf Bracket
For use with the 80 Series standards. For shelving applications in light industrial, commercial, and residential use. Standards can be mounted to nearly any type of wall. For storage and display applications in retail stores, grocery stores, light warehouses, repair garages, maintenance storage, business office storage, and residential storage. Reinforced brackets lock into slotted standards for strong, secure weight-bearing support. Fully adjustable in 1" increments. 16-gauge cold rolled steel construction. Tested to meet or exceed ANSI performance standards as established by BHMA. Fits up to 1-3/8" in diameter. Includes one pair of pole sockets and screws. For use with the 80 Series standards. For shelving applications in light industrial, commercial, and residential use. Standards can be mounted to nearly any type of wall. For storage and display applications in retail stores, grocery stores, light warehouses, repair garages, maintenance storage, business office storage, and residential storage. Reinforced brackets lock into slotted standards for strong, secure weight-bearing support. Fully adjustable in 1" increments. 16-gauge cold rolled steel construction. Tested to meet or exceed ANSI performance standards as established by BHMA.
Knape & Vogt 255 Standard Pilaster SUPPORT ROD CLOSET ZINC PLATED Knape & Vogt 180 Boltless Regular Duty Shelf Bracket
Pilasters for built-in shelving and book case applications. Adjustable on 1/2" centers. 23 gauge high-strength steel, 5/8" wide x 3/16" deep. Used to support adjustable closet rods. Includes fasteners. Safe working load: 40 lbs. Visual-pack. For use with the 80 Series standards. For shelving applications in light industrial, commercial, and residential use. Standards can be mounted to nearly any type of wall. For storage and display applications in retail stores, grocery stores, light warehouses, repair garages, maintenance storage, business office storage, and residential storage. Reinforced brackets lock into slotted standards for strong, secure weight-bearing support. Fully adjustable in 1" increments. 16-gauge cold rolled steel construction. Tested to meet or exceed ANSI performance standards as established by BHMA.
Knape & Vogt 180 Boltless Regular Duty Shelf Bracket Knape & Vogt 180 Boltless Regular Duty Shelf Bracket Knape & Vogt 255 Standard Pilaster
For use with the 80 Series standards. For shelving applications in light industrial, commercial, and residential use. Standards can be mounted to nearly any type of wall. For storage and display applications in retail stores, grocery stores, light warehouses, repair garages, maintenance storage, business office storage, and residential storage. Reinforced brackets lock into slotted standards for strong, secure weight-bearing support. Fully adjustable in 1" increments. 16-gauge cold rolled steel construction. Tested to meet or exceed ANSI performance standards as established by BHMA. For use with the 80 Series standards. For shelving applications in light industrial, commercial, and residential use. Standards can be mounted to nearly any type of wall. For storage and display applications in retail stores, grocery stores, light warehouses, repair garages, maintenance storage, business office storage, and residential storage. Reinforced brackets lock into slotted standards for strong, secure weight-bearing support. Fully adjustable in 1" increments. 16-gauge cold rolled steel construction. Tested to meet or exceed ANSI performance standards as established by BHMA. Pilasters for built-in shelving and book case applications. Adjustable on 1/2" centers. 23 gauge high-strength steel, 5/8" wide x 3/16" deep.
Knape & Vogt 180 Regular Duty Shelf Bracket Knape & Vogt 182 Bracket Mintcraft 25211PHL Single Slot Shelf Standard
For use with the 80 Series standards. For shelving applications in light industrial, commercial, and residential use. Standards can be mounted to nearly any type of wall. For storage and display applications in retail stores, grocery stores, light warehouses, repair garages, maintenance storage, business office storage, and residential storage. Reinforced brackets lock into slotted standards for strong, secure weight-bearing support. Fully adjustable in 1" increments. 16-gauge cold rolled steel construction. Tested to meet or exceed ANSI performance standards as established by BHMA. Double-lug bracket design prevents shelves and contents from falling when bumped. Supports adjust to accommodate changes in storage and layout. Rounded corners and recessed groove design. Cover strips conceal screw holes and slots for a more refined appearance. Epoxy finish is resistant to chips and scratches. Single track adjustable wall standard. Dimensions: 5/8"W x 7/16"H x selected length. For use with Pro Source shelving. UPC tagged.
SuperSlide 6609 Pre-Loaded Wall Bracket Knape & Vogt 180 Regular Duty Shelf Bracket Knape & Vogt 180 Regular Duty Shelf Bracket
Heavy duty preloaded wall bracket with anchor, mounts to the side wall and holds the end of the SuperSlide shelf and Hang Rod. Supports front lip of shelving and hang rod where they meet the side wall. With pre-loaded pins. For drywall installations. 4.125"H x 1.75"W x 2"D. Material: Resin. For use with the 80 Series standards. For shelving applications in light industrial, commercial, and residential use. Standards can be mounted to nearly any type of wall. For storage and display applications in retail stores, grocery stores, light warehouses, repair garages, maintenance storage, business office storage, and residential storage. Reinforced brackets lock into slotted standards for strong, secure weight-bearing support. Fully adjustable in 1" increments. 16-gauge cold rolled steel construction. Tested to meet or exceed ANSI performance standards as established by BHMA. For use with the 80 Series standards. For shelving applications in light industrial, commercial, and residential use. Standards can be mounted to nearly any type of wall. For storage and display applications in retail stores, grocery stores, light warehouses, repair garages, maintenance storage, business office storage, and residential storage. Reinforced brackets lock into slotted standards for strong, secure weight-bearing support. Fully adjustable in 1" increments. 16-gauge cold rolled steel construction. Tested to meet or exceed ANSI performance standards as established by BHMA.
Knape & Vogt PK255 BR 48 Standard Pilaster National Hardware V105 Pole Socket Set Knape & Vogt 255 Adjustable Shelf Standard
POLE SOCKETS BRS
Our Price: $2.95
Pilasters for built-in shelving and book case applications. Adjustable on 1/2" centers. 23 gauge high-strength steel, 5/8" wide x 3/16" deep. National Hardware Pole Socket Set, Series: V105, 0.38 in Depth, 0.02 in Thickness, Steel, Brass, 400 lb Load Capacity, Suitable For Use With: Upto 1-3/8 in Diameter Pole, Includes: (1) Socket Pair Per Pack and Fasteners, 0.16 in Hole Diameter, For used to mount wood closet poles Pilasters for built-in shelving and book case applications. Adjustable on 1/2" centers. 23 gauge high-strength steel, 5/8" wide x 3/16" deep.
Knape & Vogt 255 Standard Pilaster Knape & Vogt RP-0044-BWT Non-Adjustable Shelf and Rod Bracket Prime Line U 9337 Spoon Shelf Support Peg
Pilasters for built-in shelving and book case applications. Adjustable on 1/2" centers. 23 gauge high-strength steel, 5/8" wide x 3/16" deep. For 11" - 18" deep shelves and rods up to 1-3/8" diameter. Slide-thru feature. For use with cabinets and storage cabinets with glass shelves.
Knape & Vogt 255 Adjustable Shelf Standard SOCKET WOOD POLE NAT WD 1-3/8 Knape & Vogt 182 Adjustable Twin Slot Bracket
Pilasters for built-in shelving and book case applications. Adjustable on 1/2" centers. 23 gauge high-strength steel, 5/8" wide x 3/16" deep. 1-3/8" diameter. Single screw mounting. Includes two pcs of .75" screws and pole sockets. Double-lug bracket design prevents shelves and contents from falling when bumped. Supports adjust to accommodate changes in storage and layout. Rounded corners and recessed groove design. Cover strips conceal screw holes and slots for a more refined appearance. Epoxy finish is resistant to chips and scratches.
Closetmaid 6610 Wall Clip Knape & Vogt 182 Bracket SUPPORT WHITE
Anchors shelf to wall. Ensures stability of shelf. Double-lug bracket design prevents shelves and contents from falling when bumped. Supports adjust to accommodate changes in storage and layout. Rounded corners and recessed groove design. Cover strips conceal screw holes and slots for a more refined appearance. Epoxy finish is resistant to chips and scratches. Used to support shelves. 1/4" diameter shank. Safe working load 25 lbs. Boxed loose.
Slim-Line 215 Decorative Regular Duty Shelf L-Bracket BRACKET SUPPORT SHOE SHELF WHT Knape & Vogt 180 Boltless Regular Duty Shelf Bracket
Made of heavy-duty steel covered with high-impact plastic. Italian design. Functional and attractive. For wire shelving, converts almost any wire shelf to a shoe shelf. Make a shoe shelf by inverting shelf, lip facing up. Holds shoes away from wall at an angle. Use 1 shoe support bracket every 24 in. Does not work with Close Mesh shelving. 6.125"H x 1.25"W x 4.75"D. For use with the 80 Series standards. For shelving applications in light industrial, commercial, and residential use. Standards can be mounted to nearly any type of wall. For storage and display applications in retail stores, grocery stores, light warehouses, repair garages, maintenance storage, business office storage, and residential storage. Reinforced brackets lock into slotted standards for strong, secure weight-bearing support. Fully adjustable in 1" increments. 16-gauge cold rolled steel construction. Tested to meet or exceed ANSI performance standards as established by BHMA.
Knape & Vogt 180 Boltless Regular Duty Shelf Bracket Knape & Vogt 180 Boltless Regular Duty Shelf Bracket Knape & Vogt CD-0106 Joist Bracket
For use with the 80 Series standards. For shelving applications in light industrial, commercial, and residential use. Standards can be mounted to nearly any type of wall. For storage and display applications in retail stores, grocery stores, light warehouses, repair garages, maintenance storage, business office storage, and residential storage. Reinforced brackets lock into slotted standards for strong, secure weight-bearing support. Fully adjustable in 1" increments. 16-gauge cold rolled steel construction. Tested to meet or exceed ANSI performance standards as established by BHMA. For use with the 80 Series standards. For shelving applications in light industrial, commercial, and residential use. Standards can be mounted to nearly any type of wall. For storage and display applications in retail stores, grocery stores, light warehouses, repair garages, maintenance storage, business office storage, and residential storage. Reinforced brackets lock into slotted standards for strong, secure weight-bearing support. Fully adjustable in 1" increments. 16-gauge cold rolled steel construction. Tested to meet or exceed ANSI performance standards as established by BHMA. Durable, use to install fast mount wall standards over finish wall without fastening wall standard to wall. Fastens to stud wall header plate. Use with #0100 fast mount wall standards. Supports 600 Lbs. Per Bracket.
Knape & Vogt 180 Regular Duty Shelf Bracket Prime Line U 9360 Shelf Support Peg Knape & Vogt CD-0104 Fast Mount Hook
For use with the 80 Series standards. For shelving applications in light industrial, commercial, and residential use. Standards can be mounted to nearly any type of wall. For storage and display applications in retail stores, grocery stores, light warehouses, repair garages, maintenance storage, business office storage, and residential storage. Reinforced brackets lock into slotted standards for strong, secure weight-bearing support. Fully adjustable in 1" increments. 16-gauge cold rolled steel construction. Tested to meet or exceed ANSI performance standards as established by BHMA. Mini-style frequently used in stereo and display cabinets. 1/2"D support, 5mm OD x 3/8"L peg. 12 lbs. per peg maximum safe-weight load. Hook hangs fast-mount track from top of basement wall. No screws required. Load tested up to 1,000 lbs per hook.
BRACKET CLOSET POLE SAT BRASS Prime Line N 6794 Rod Holder Closet Pole Socket Knape & Vogt 82 WH 16.5 Shelf Standard
Screws included. Fits up to 1-3/8" in diameter. Includes one pair of pole sockets with fasteners. Features twice the slots for more strength. Two 10-1/2" brackets mounted to twin-slotted standards support up to 300 pounds per shelf when installed according to manufacturer's directions.
Knape & Vogt CD-0105 Phillips Flat Head Screw Pack Knape & Vogt CD-5934-WT Screw Set Closetmaid 1002 Joiner Plate
Durable zinc finish. Phillips flat head, 14 pack. Use with #0100 fast mount wall standards. Supports 200 Lbs. per screw. Zinc clad for shelf and rod brackets. Contains: 2 each 1.5" x #10 screws for mounting bracket to wall and 2 each .75" x #8 screws for mounting shelf to bracket. Phillips head Screws. Use to join 2 shelves together to create a continuous run of shelving. Supports the joining of 2 wire shelves. One set consists of 2 joiner plates, 1 bolt and 1 nut. NOT for use with Close Mesh shelving. 1.19?H x 2.25?W x 1.13?D. Material: Resin.
Knape & Vogt 80 BLK 24 Regular Duty Single Slot Shelf Standard SuperSlide 5655 Closet Rod Support Knape & Vogt 256PZC Adjustable Pilaster Shelf Support
For use with the 180 Series brackets. Standards can be mounted to nearly any type of wall. Reinforced brackets lock into slotted standard for strong, secure weight-bearing support. Fully adjustable 1" increments. 16-gauge steel construction. Dimension 5/8" wide x 13/32" high x selected length. Converts shelf & rod shelving to a continous slide. Hang rod snaps into bracket to create an continuous slide for hangers. Snaps onto SuperSlide shelf to support hang rod. Use one every 36 in. (91,44cm) of hang rod and at each end of shelf and hang rod. 5.75"H x 0.87"W x 3.87"D. Material: Resin. Snaps securely into place. For use with No. 233 and No. 255. High strength steel.
Prime Line U 9116 Spoon Shelf Support Peg Prime Line U 9150 Spoon Shelf Support Peg Knape & Vogt 182 Twin Slot Bracket
For use with cabinets and storage cabinets with glass shelves. For use with cabinets and storage cabinets with glass shelves. Double-lug bracket design prevents shelves and contents from falling when bumped. Supports adjust to accommodate changes in storage and layout. Rounded corners and recessed groove design. Cover strips conceal screw holes and slots for a more refined appearance. Epoxy finish is resistant to chips and scratches.
Knape & Vogt 182 Adjustable Twin Slot Bracket SUPPORT ROD CLOSET WHITE      Prime Line U 9147 Shelf Support Peg
CLOSET ROD SUPPORTS WHT
Our Price: $3.38
Double-lug bracket design prevents shelves and contents from falling when bumped. Supports adjust to accommodate changes in storage and layout. Rounded corners and recessed groove design. Cover strips conceal screw holes and slots for a more refined appearance. Epoxy finish is resistant to chips and scratches. Used to support adjustable closet rods. Includes fasteners. Safe working load: 40 lbs. Visual-pack. 1/4" diameter peg and support a maximum safe load of 5 lb. Used to support cabinet shelves.
SUPPORT ZINC PLATED           SUPPORT BRONZE                Knape & Vogt 335P PLAS Shelf Support Pin
Used to support shelves. 1/4" diameter shank. Safe working load 25 lbs. Visual-pack. Used to support shelves. Can be used with National 157 shelf standards. Safe working load: 70 lbs. Visual-pack. 1/4" diameter x 7/16"L pin. Polybagged.
Knape & Vogt 182 Adjustable Twin Slot Bracket National Hardware 110BC Shelf Bracket National Hardware 208BC Shelf and Rod Bracket
SHELF/ROD BRACKETS WHT
Our Price: $3.65
Double-lug bracket design prevents shelves and contents from falling when bumped. Supports adjust to accommodate changes in storage and layout. Rounded corners and recessed groove design. Cover strips conceal screw holes and slots for a more refined appearance. Epoxy finish is resistant to chips and scratches. National Hardware Shelf Bracket, Series: 110BC, 8 in Length, 1.56 in Width, 6 in Depth, Steel, Zinc Plated, 25 lb Load Capacity, Suitable For Use With: National 110 Shelf Brackets, Includes: (12) No 7 x 3/4 in and 1-1/4 in Screws National Hardware Shelf and Rod Bracket, Series: 208BC, 12.74 in Length, 9.31 in Width, 0.84 in Depth, 0.22 in Thickness, Steel, White, 125 lb Load Capacity, For used to hold up to 1-3/8 in diameter closet rod
Knape & Vogt PK255 ZC 60 Standard Pilaster Prime Line U 9302 Shelf Support Peg SuperSlide 75651 Closet Rod Connector
Pilasters for built-in shelving and book case applications. Adjustable on 1/2" centers. 23 gauge high-strength steel, 5/8" wide x 3/16" deep. 3mm diameter peg and support a maximum safe load of 10 lb. Used to support cabinet shelves. Use with SuperSlide shelving to create uninterrupted sliding action around corners for walk-in closets. Keeps hangers from sliding off exposed ends. Support the connection of the two pieces of hang rod with a hang bar support. 2"H x 0.5"W x 0.5"D. Material: Plastic.
Closetmaid 6620 Wall Bracket Knape & Vogt 182 Twin Slot Bracket Knape & Vogt PK255 BR 72 Standard Pilaster
Heavy duty preloaded bracket with anchor easily mounts to the wall and holds the end of any size ClosetMaid shelf. Provides side wall support. Supports front lip of shelving where it meets the side wall. For drywall installations. Includes: 2.875"H x 2.125"W x 1.75"D. Material: Resin. Double-lug bracket design prevents shelves and contents from falling when bumped. Supports adjust to accommodate changes in storage and layout. Rounded corners and recessed groove design. Cover strips conceal screw holes and slots for a more refined appearance. Epoxy finish is resistant to chips and scratches. Pilasters for built-in shelving and book case applications. Adjustable on 1/2" centers. 23 gauge high-strength steel, 5/8" wide x 3/16" deep.
Knape & Vogt 255 Standard Pilaster Mintcraft 25212PHL Single Slot Shelf Standard Knape & Vogt 255 Standard Pilaster
Pilasters for built-in shelving and book case applications. Adjustable on 1/2" centers. 23 gauge high-strength steel, 5/8" wide x 3/16" deep. Single track adjustable wall standard. Dimensions: 5/8"W x 7/16"H x selected length. For use with Pro Source shelving. UPC tagged. Pilasters for built-in shelving and book case applications. Adjustable on 1/2" centers. 23 gauge high-strength steel, 5/8" wide x 3/16" deep.
Knape & Vogt 182 Twin Slot Bracket SCREW WOODGRAIN NO4X5/8IN     SCREW SILVER NO4X5/8IN
SCREWS #4X5/8IN SILVER
Our Price: $3.82
Double-lug bracket design prevents shelves and contents from falling when bumped. Supports adjust to accommodate changes in storage and layout. Rounded corners and recessed groove design. Cover strips conceal screw holes and slots for a more refined appearance. Epoxy finish is resistant to chips and scratches. 5/8" x #4 screws. Visual-pack. 5/8" x #4 screws. Visual-pack.
Knape & Vogt RP-0046-WT Shelf and Rod Bracket SHELF STANDARD SILVER 4FT     Knape & Vogt RP-0043-WT Adjustable Shelf and Rod Bracket
Holds up to 500 lb. per pair.  For 12" deep shelf. Mounts to the wall for surface or flush mounted applications. Predrilled nail and screw holes. Use with 158 Shelf Supports. 5/8" Wide, 3/16" Deep. Boxed loose barcoded. For 11" - 14" deep shelves and rods up to 1-3/8" diameter. Slide thru and snap-in pole features.
National Hardware DPB103 Pole Socket Set Slim-Line 215 Decorative Regular Duty Shelf L-Bracket Knape & Vogt Designer 182 Shelf Bracket
National Hardware Pole Socket Set, Series: DPB103, Wood, Natural, 120 lb Load Capacity, Suitable For Use With: Upto 1-3/8 in Diameter Pole, Includes: Fasteners, For used to mount wood closet poles Made of heavy-duty steel covered with high-impact plastic. Italian design. Functional and attractive. Double-lug bracket design prevents shelves and contents from falling when bumped. Supports adjust to accommodate changes in storage and layout. Rounded corners and recessed groove design. Cover strips conceal screw holes and slots for a more refined appearance. Epoxy finish is resistant to chips and scratches.
Knape & Vogt BK-0102 Shelf Bracket National Hardware 108BC Shelf and Rod Bracket Knape & Vogt CD-0047 Carded Screw and Cap Set
SHELF BRACKETS WHT
Our Price: $3.97
Designed to fit into the fast mount standards. Load tested to 150 lbs. National Hardware Shelf and Rod Bracket, Series: 108BC, 12.45 in Length, 10.87 in Width, 1 in Depth, 0.1 in Thickness, Steel, White, 125 lb Load Capacity, For Mounting Shelves and Closet Rods in Closets and Storage Rooms Mounts 2 brackets and 1 pole. Caps cover mounting screws. Carded.
Closetmaid 1180 Support Bracket SuperSlide 6641 Wall Bracket Knape & Vogt 256 Adjustable Dimple Pilaster Support
Closetmaid Support Bracket, 12 in Length, 2 in Width, 2 in Depth, Steel, Epoxy Coated, White, Suitable For Use With: Wire Shelving, Includes: (1) Support Bracket, (1) Anchor, (1) NO 8 Pin Supports low profile SuperSlide shelving in a wall to wall installation. Includes: 2 wall brackets, 4 pins and 4 anchors. Use in conjunction with support brackets and wall clips for installing wire shelving. Suports front lip of shelving where it meets the side wall. 2"H x 2.19W x 1.75"D. Material: Resin Snaps securely into place. For use with No. 233 and No. 255. High strength steel.
SHELF SUPPORT 1/4IN ZINC PLTD National Hardware V103 Pole Socket Set Closetmaid 1001 Corner Support Bracket
National Hardware Pole Socket Set, Series: V103, Wood, Natural, 120 lb Load Capacity, Suitable For Use With: Upto 1-3/8 in Diameter Pole, Includes: Fasteners, For used to mount wood closet poles Supports front lip of shelving to keep it level where it meets another shelf in a corner. Snap in place design. For corner installations.  0.375?H x 5?W x 0.75?D. Material: steel, coated with epoxy.
Amerock BP3404CB Cabinet Hinge Knape & Vogt Designer 182 Shelf Bracket Knape & Vogt RP-0045-WT Non-Adjustable Shelf and Rod Bracket
3-1/2"L x 1-7/16"W - Polybagged. Double-lug bracket design prevents shelves and contents from falling when bumped. Supports adjust to accommodate changes in storage and layout. Rounded corners and recessed groove design. Cover strips conceal screw holes and slots for a more refined appearance. Epoxy finish is resistant to chips and scratches. For 11" - 18" deep shelves and rods up to 1-3/8" diameter. Slide-thru feature.
Toolbasix 6298319-3L Drawer Lock REPL FLAG MAILBOX KT          Knape & Vogt 345 Shelf Support
Alloy steel construction. Fits max 3/4" thick. For cabinet doors and desk drawers. 1.417" screw hole spacing. 2.04" overall width. Includes 2 keys and screws. Durable three piece kit with an aluminum red flag, plastic hub and washer for easy installation and will not rust or deteriorate. For 5 mm drilled holes. Use with No.129 rubber cushion. 4.7 mm diameter x 5/16" L pin. Poly pack.
Knape & Vogt 345 Shelf Support Knape & Vogt Designer 182 Shelf Bracket Knape & Vogt 346 Shelf Support
For 5 mm drilled holes. Use with No.129 rubber cushion. 4.7 mm diameter x 5/16" L pin. Poly pack. Double-lug bracket design prevents shelves and contents from falling when bumped. Supports adjust to accommodate changes in storage and layout. Rounded corners and recessed groove design. Cover strips conceal screw holes and slots for a more refined appearance. Epoxy finish is resistant to chips and scratches. Use with No. 129 rubber cushion. For 1/4" diameter holes x 3/8"L pin.
Knape & Vogt 346P BR Shelf Support Knape & Vogt 255-81N ZC Nail 8 in L SHELF STANDARD BRASSHD 4FT
Use with No. 129 rubber cushion. For 1/4" diameter holes x 3/8"L pin. For use with 255/233 zinc, 255 galvanized and 255 almond. Mounts to the wall for surface or flush mounted applications. Predrilled nail and screw holes. Use with 158 Shelf Supports. 5/8" Wide, 3/16" Deep. Boxed loose barcoded.
SHELF STANDARD FRUITWOOD 4FT  SHELF STANDARD WHITE 4FT      SHELF STANDARD SILVER 6FT
Mounts to the wall for surface or flush mounted applications. Predrilled nail and screw holes. Use with 158 Shelf Supports. 5/8" Wide, 3/16" Deep. Boxed loose barcoded. Mounts to the wall for surface or flush mounted applications. Predrilled nail and screw holes. Use with 158 Shelf Supports. 5/8" Wide, 3/16" Deep. Boxed loose barcoded. Mounts to the wall for surface or flush mounted applications. Predrilled nail and screw holes. Use with 158 Shelf Supports. 5/8" Wide, 3/16" Deep. Boxed loose barcoded.
Knape & Vogt BK-0103-11 Shelf Bracket Interdesign 6530 Accessory Hook HANGER CLOSET ACCESSORY LOOP
With fold out support for heavy duty loads. Load tested to 300 lbs. Plated steel wire, ideal for hanging multiple items. Packaged with hang tab. InterDesign Over The Rod Accessory Hook, Series: Classico, Rod Mounting, Steel, Bronze, For Hanging Storage
BRACKET SHELF DECO WHITE 6X6IN National Hardware 110BC Shelf Bracket Mintcraft 25213PHL Single Slot Shelf Standard
Heavy-duty steel construction. National Hardware Shelf Bracket, Series: 110BC, 10 in Length, 1.91 in Width, 8 in Depth, Steel, Zinc Plated, 35 lb Load Capacity, Suitable For Use With: National 110 Shelf Brackets, Includes: (12) No 7 x 3/4 in and 1-1/4 in Screws Single track adjustable wall standard. Dimensions: 5/8"W x 7/16"H x selected length. For use with Pro Source shelving. UPC tagged.
Knape & Vogt 0202-10PM Shelf Standard Knape & Vogt BK-0102-14 Shelf Bracket SuperSlide 75638 Closet Rod End Cap
Knape & Vogt Shelf Standard, Heavy Duty, 10 in Length, 4.88 in Width, 3.88 in Depth Designed to fit into the fast mount standards. Load tested to 150 lbs. For use with ClosetMaid, SuperSlide wire shelving. Prevents hangers from sliding off end of closet hang rod. Insert into end of the hang rod.Two end caps per package. 0.5"H x 0.5"W x 0.5"D. Material: Resin.
Mintcraft 25202PHL Shelf Standard Prime Line U 9947 Drawer and Cabinet Lock Solar PLMB0060 Mailbox Mounting Board
Adjustable dual track. 1pc. Dimensions: 1" H x 5/8: W x 25-1/2"L. For use with ProSource shelving. UPC tagged. Keyed locking unit for added security. Fits 7/8" hole. 5/16" bolt throw. Includes 1 lock, 2 keys and installation screws. Durable molded construction. Mounts to 4? x 4? wooden or plastic posts. Adapts to fit any size rural mailbox. Includes mailbox mounting hardware and instructions. Size: 12.5"H x 6"W x 1.1D"
Knape & Vogt 0111-40 Horizontal Fast Mount Hang Track National Hardware V826 Adjustable Drawer Lock National Hardware VKA826 Adjustable Drawer Lock
DRAWER LOCKS BRS
Our Price: $5.20
DRAWER LOCKS BRS
Our Price: $5.20
Horizontal track to hang uprights, load tested to 400 lb. per screw on wall studs. Tested to 100 lb. per anchor on dry wall mount. National Hardware Drawer Lock, Adjustable, Series: V826, Suitable For Use With: 3/4 in Drawers, Keyed Key, Die Cast Zinc, Steel, Brass, For Residential Applications National Hardware Drawer Lock, Adjustable, Series: VKA826, Suitable For Use With: 3/4 in Drawers, Keyed Key, Die Cast Zinc, Steel, Brass, For Residential Applications
Stanley 234971 Adjustable Shelf and Rod Bracket Knape & Vogt 7980TI Standard Hang Rail Link Slim-Line 215 Decorative Regular Duty Shelf L-Bracket
Sturdy, shelf support and clothes rod hanger is designed for shelves 12" or larger. Embossed for extra strength. Brackets are punched for #12 wood screws. Adjusts 3/4" for use with or without hook strip. Holds up to 1-3/8" diameter rod. Rod mounts on 3" drop. Includes screws. Attaches to the top end of an 80 series wall standard to allow it to be hung on an installation hang rail. Packaged per pair with two links and two screws. Made of heavy-duty steel covered with high-impact plastic. Italian design. Functional and attractive.
Stanley 234401 L-Shaped Shelf Bracket Knape & Vogt 0202-14PM Shelf Standard Closetmaid 7561 U-Shape Shelf Clip
Designed for mounting shelves in closets and storage rooms. Brackets are punched for #12 wood screws. Safe Working Load: 150 lbs. Boxed. Knape & Vogt Shelf Standard, Heavy Duty, 14 in Length, 4.88 in Width, 3.88 in Depth Attaches to the back of shelving to anchor shelf to back wall. Shelf clip "locks" shelving into place - attaching it at the top and bottom of shelf wire with or instead of wall clips. For concrete/stud and drywall installation. Material: Metal.
Knape & Vogt BK-0103-14 Shelf Bracket Stanley S822-094 Shelf/Rod Bracket Closetmaid 26607 Support Bracket
SHELF/ROD BRACKETS WHT
Our Price: $5.58
With fold out support for heavy duty loads. Load tested to 300 lbs. Designed for mounting shelves and closet rods in closets, storage rooms, etc. Rod mounts on 3 inch drop for easy hanger use. Mount to stud for optimal load capacity. Punched for #12 wood screws. Bulk bagged. Preloaded with #8 pin drive and anchors. No.6606, 71925 and No. 21775. - For Organizer, Wardrobe, SuperSlide and Close Mesh Shelves 12" in depth; and Wardrobe or hanging SuperSlide shelves 16" in depth. No. 26607, 71924, and No.21776 - For Organizer, SuperSlide (in storage application), and Close Mesh shelves 16" in depth. No.26605 - For Organizer, Wardrobe, SuperSlide and Close Mesh Shelves 20" in depth.
Knape & Vogt RP0022-18/30 Adjustable Closet Rod MAILBOX BRACKETS              National Hardware 110BC Shelf Bracket
1-1/4" diameter. Constructed from galvanized steel. They adjust to fit any size Postmaster approved rural mailbox. Includes mailbox mounting hardware and instructions. National Hardware Shelf Bracket, Series: 110BC, 12 in Length, 1.87 in Width, 10 in Depth, Steel, Zinc Plated, 35 lb Load Capacity, Suitable For Use With: National 110 Shelf Brackets, Includes: (12) No 7 x 3/4 in and 1-1/4 in Screws
ShelfTrack 2853 Shelf Bracket ROD CLOSET ADJ 30-48IN SILVER Stanley 229393 Decorative Shelf Bracket
For use with ShelfTrack system. Locks the wire shelf to the vertical wall standard for added safety. Keeps shelves from being pushed up and unlocked accidentally. Works with ventilated shelving. 1/2" width. Rods sized 48" to 72" and 72" to 120" includes 1-piece central support, and rods sized 96" to 150" include 2-piece central support. Sp152bc - Stock-Pac Loose.
LOCK SHOWCASE CHM 4-1/2IN     National Hardware VKA828 Adjustable Showcase Lock National Hardware N229-401 Ornamental Shelf Bracket
SHOWCASE LOCKS CHROME
Our Price: $5.92
Locks display cases, showcase doors and all sliding glass, wood or metal doors up to 1/4" thick. Die-cast zinc lock body; steel locking bar; and solid brass keyway and tumblers. National Hardware Showcase Lock, Adjustable, Series: VKA828, Suitable For Use With: 1/4 in Thickness Doors, Keyed Alike Key, 4-1/2 in Crossbore, Tumbler Lock Pin, Steel Bar, Die Cast Zinc Body, Solid Brass Keyway, Chrome Plated, For Residential and Locks Display Cases, Showcase Doors and All Sliding Glass, Wood or Metal National Hardware Shelf Bracket, Ornamental, Series: 152BC, 5 in Length, 3-1/2 in Depth, 0.1 in Thickness, Steel, Antique Bronze, 80 lb Load Capacity, Includes: Swivel Hook for 360 deg Plant Growth, For Indoor/Outdoor Applications
National Hardware N229-385 Ornamental Shelf Bracket SHELF STANDARD BRASSHD 6FT    SHELF STANDARD FRUITWOOD 6FT
National Hardware Shelf Bracket, Ornamental, Series: 152BC, 5 in Length, 3-1/2 in Depth, 0.1 in Thickness, Steel, Antique White, 80 lb Load Capacity, Includes: Swivel Hook for 360 deg Plant Growth, For Indoor/Outdoor Applications Mounts to the wall for surface or flush mounted applications. Predrilled nail and screw holes. Use with 158 Shelf Supports. 5/8" Wide, 3/16" Deep. Boxed loose barcoded. Mounts to the wall for surface or flush mounted applications. Predrilled nail and screw holes. Use with 158 Shelf Supports. 5/8" Wide, 3/16" Deep. Boxed loose barcoded.
SHELF STANDARD WHITE 6FT      Knape & Vogt 80 BLK 72 Regular Duty Single Slot Shelf Standard Knape & Vogt 256 Adjustable Dimple Pilaster Support
Mounts to the wall for surface or flush mounted applications. Predrilled nail and screw holes. Use with 158 Shelf Supports. 5/8" Wide, 3/16" Deep. Boxed loose barcoded. For use with the 180 Series brackets. Standards can be mounted to nearly any type of wall. Reinforced brackets lock into slotted standard for strong, secure weight-bearing support. Fully adjustable 1" increments. 16-gauge steel construction. Dimension 5/8" wide x 13/32" high x selected length. Snaps securely into place. For use with No. 233 and No. 255. High strength steel.
National Hardware N183-756 Adjustable Utility Lock National Hardware V826 Adjustable Utility Lock National Hardware N192-476 Adjustable Utility Lock
National Hardware Utility Lock, Adjustable, Series: V825, Suitable For Use With: Locking Wood or Metal Cabinet Doors and Drawers, Different Key, 2 Keys, Y13 Yale, B1 Cole Keyway, 1/4 in Crossbore, 2.33 in Overall Length, 0.62 in Overall Width, 0.89 in Overall Depth, Die Cast Zinc, Steel, Chrome Plated, ANSI E07262, BHMA A156.11 National Hardware Utility Lock, Adjustable, Series: V826, Suitable For Use With: Locking Wood or Metal Cabinet Doors and Drawers, Different Key, 2 Keys, Y13 Yale, B1 Cole Keyway, 1/2 in Crossbore, 2.33 in Overall Length, 0.62 in Overall Width, 1.15 in Overall Depth, Die Cast Zinc, Steel, Chrome Plated, ANSI E07262, BHMA A156.11 National Hardware Utility Lock, Adjustable, Series: V825, Suitable For Use With: Locking Wood or Metal Cabinet Doors and Drawers, Different Key, Y13 Yale, B1 Cole Keyway, 3/4 in Crossbore, Die Cast Zinc, Steel, Chrome Plated, For Residential Applications
National Hardware N192-484 Adjustable Utility Lock National Hardware N239-152 Adjustable Utility Lock LOCK UTILITY BRASS 1/4IN
UTILITY LOCKS 1/4IN BRS
Our Price: $6.01
UTILITY LOCKS 1/4IN BRS
Our Price: $6.01
National Hardware Utility Lock, Adjustable, Series: VKA825, Suitable For Use With: Locking Wood or Metal Cabinet Doors and Drawers, Keyed Alike Key, 2 Keys, Y13 Yale, B1 Cole Keyway, 3/4 in Crossbore, 2.33 in Overall Length, 0.62 in Overall Width, 1.39 in Overall Depth, Die Cast Zinc, Steel, Chrome Plated, ANSI E07262, BHMA A156.11 National Hardware Utility Lock, Adjustable, Series: VKA825, Suitable For Use With: Locking Wood or Metal Cabinet Doors and Drawers, Keyed Alike Key, 2 Keys, Y13 Yale, B1 Cole Keyway, 1/4 in Crossbore, Die Cast Zinc, Steel, Brass, For Residential Applications National Hardware Door/Drawer Utility Lock, Series: V825, Different Key, Key Number: Yale Y13 or Cole B1, 1/4 in Crossbore, Steel/Die-Cast Zinc, Brass, Includes: (2) Keys, Standards: ANSI Specified, BHMA A156.11, For Locking Wood or Metal Cabinet Doors and Drawers
National Hardware N185-272 Adjustable Utility Lock National Hardware N185-280 Adjustable Utility Lock Knape & Vogt 7982WH Standard Link
National Hardware Utility Lock, Adjustable, Series: VKA825, Suitable For Use With: Locking Wood or Metal Cabinet Doors and Drawers, Keyed Alike Key, Y13 Yale, B1 Cole Keyway, 1/4 in Crossbore, Die Cast Zinc, Steel, Black, Chrome Plated, For Residential Applications National Hardware Utility Lock, Adjustable, Series: VKA825, Suitable For Use With: Locking Wood or Metal Cabinet Doors and Drawers, Keyed Alike Key, Y13 Yale, B1 Cole Keyway, 1/2 in Crossbore, Die Cast Zinc, Steel, Black, Chrome Plated, For Residential Applications Attaches to the top end of an 82 series wall standard to allow it to be hung on an installation hang rail. Hold up to 900 lbs per pair (when installed on 16" stud centers). Packaged in pairs with two links and two screws. Polybagged.
Prime Line U 9945 Drawer and Cabinet Lock Prime Line U 9946 Drawer and Cabinet Lock BRACKET SHELF DECO BLACK 6X6IN
Stainless steel face. Plated diecast housing and steel cams can be mounted to metal or wood doors and drawers from 13/16" thick. 1-1/8"D x 2"L. Keyed locking for maximum security. Uses Yale Y-13 keyway. Includes 1 lock, 3 cams, 1 trim collar, 1 spur washer, 2 rotation washers, 1 lock nut, and 2 keys. Plated die-cast housing and steel cams can be mounted to metal or wood door/drawer from 1/2" to 1" thick. Keyed locking for maximum security. Includes 1 each; lock, trim collar, spur washer and lock nut, 3 each; cams, rotation washers and keys. Prefix U on factory number denotes new Defender Security packaging. Heavy-duty steel construction.
ROD CLOSET ADJ 18-30IN SILVER Prime Line U 9940 Mailbox Lock Knape & Vogt 208 Super Duty Ultimate Shelf L-Bracket
Rods sized 48" to 72" and 72" to 120" includes 1-piece central support, and rods sized 96" to 150" include 2-piece central support. Diecast 3/4" cylinder with brass front plate, brass pins and spring steel locking clip. Multi-cam assortment to eliminate stocking individual locks. Replaces American, Florence, Miami-Carey, Bommer and Auth cams. All cylinders rotate 90 degrees counter clockwise to open. Includes 5 cams, 1 each with 2 keys. Prefix U on factory number denotes new Defender Security packaging. 3/4" steel strut and 5mm thick steel bar construction. Tough epoxy coat finish. Recommended fasteners are 3" or longer 5/16" pan head screws mounted onto studs. Attach shelf using #8 or larger rounded-head wood screw. Holds up to 1,200 pounds per pair when mounted per manufacturer recommendations. Mounts directly to wall.  Less fasteners.
Knape & Vogt 208 Super Duty Ultimate Shelf L-Bracket Knape & Vogt 208 Extra Ultimate L-Bracket National Hardware N239-178 Adjustable Utility Lock
UTILITY LOCKS 1/2IN BRS
Our Price: $6.23
3/4" steel strut and 5mm thick steel bar construction. Tough epoxy coat finish. Recommended fasteners are 3" or longer 5/16" pan head screws mounted onto studs. Attach shelf using #8 or larger rounded-head wood screw. Holds up to 1,200 pounds per pair when mounted per manufacturer recommendations. Mounts directly to wall.  Less fasteners. 3/4" steel strut and 5mm thick steel bar construction. Tough epoxy coat finish. Recommended fasteners are 3" or longer 5/16" pan head screws mounted onto studs. Attach shelf using #8 or larger rounded-head wood screw. Holds up to 1,200 pounds per pair when mounted per manufacturer recommendations. Mounts directly to wall.  Less fasteners. National Hardware Utility Lock, Adjustable, Series: VKA825, Suitable For Use With: Locking Wood or Metal Cabinet Doors and Drawers, Keyed Alike Key, 2 Keys, Y13 Yale, B1 Cole Keyway, 1/2 in Crossbore, Die Cast Zinc, Steel, Brass, For Residential Applications
LOCK UTILITY BRASS 1/2IN      Closetmaid 7546 Down Clip/Anchor BRACKET SHELF DECO WHITE 8X8IN
UTILITY LOCKS 1/2IN BRS
Our Price: $6.23
National Hardware Door/Drawer Utility Lock, Series: V825, Different Key, Key Number: Yale Y13 or Cole B1, 1/2 in Crossbore, Steel/Die-Cast Zinc, Brass, Includes: (2) Keys, Standards: ANSI Specified, BHMA A156.11, For Locking Wood or Metal Cabinet Doors and Drawers Attaches to the back of shelving to anchor shelf to back wall. For concrete/stud and drywall installation. Package includes 12 clips, 12 anchors and 12 #8 screws. Heavy-duty steel construction.
Prime Line U-9945KA Drawer and Cabinet Lock ROD CLOSET BRT 18-30IN        National Hardware N239-194 Adjustable Utility Lock
UTILITY LOCKS 3/4IN BRS
Our Price: $6.39
Stainless steel face. Plated diecast housing and steel cams can be mounted to metal or wood doors and drawers from 13/16" thick. 1-1/8"D x 2"L. Keyed locking for maximum security. Uses Yale Y-13 keyway. Includes 1 lock, 3 cams, 1 trim collar, 1 spur washer, 2 rotation washers, 1 lock nut, and 2 keys. Used to hang clothes and other items. Tubes are made with lock seam construction for strength.  Ends align for easy installation. Visual-pack. National Hardware Utility Lock, Adjustable, Series: VKA825, Suitable For Use With: Locking Wood or Metal Cabinet Doors and Drawers, Keyed Alike Key, 2 Keys, Y13 Yale, B1 Cole Keyway, 3/4 in Crossbore, 2.33 in Overall Length, 0.62 in Overall Width, 1.39 in Overall Depth, Die Cast Zinc, Steel, Brass, ANSI E07262, BHMA A156.11
LOCK UTILITY BRASS 3/4IN      Toolbasix 6298343-3L Showcase Lock Knape & Vogt 255 Pilaster Nail