Home > HARDWARE > GENERAL HARDWARE > DECORATIVE HARDWARE
Choose a sub category:
DECORATIVE HINGES DECORATIVE PULLS DECORATIVE LATCHES / LOCKS
DECORATIVE CORNERS/BRACES LID SUPPORTS TABLE HARDWARE
MISC DECORATIVE HARDWARE
Sort By:
1
Amerock Allison BP811WD Round Cabinet Knob Amerock Allison BP813WD Round Cabinet Knob KNOB 1IN 25MM UNFINISHED
Unfinished wood knob. Use with one #8-32 x 1" type screw. Unfinished wood knob. Use with one #8-32 x 1" type screw. Use with one #8-32 x 1" type screw.
Prime Line R 7133 Drawer Track Backplate Schlage C78B3 Gate Hook Frost King OS6H Outlet Plate Sealer
Can be inverted for self-adjusting application, used on rolled edge and other center mounted tracks. Dimensions: Hook: 1-1/2? long. Staple: 3/4? high x 15/16? wide. Fire retardant plastic foam reduces drafts and heat loss. Enough for six standard electrical outlets. 2-1/2"W x 4"H.
Frost King OSS6H Switch Plate Sealer Prime Line R 7085 Drawer Track Guide Kit Prime Line R 7152 Drawer Track Guide Kit
Fire retardant plastic foam reduces drafts and heat loss. Enough for six standard electrical switches. 2-1/2"W x 4"H. Polyethylene guide and white polyethylene side saddles, restores smooth operation to track mounted drawers. Fits a 9/32" x 1-1/8" track. Polyethylene guide and white polyethylene side saddles, restores smooth operation to track mounted drawers. Fits a 9/32" x 1-1/8" track.
Prime Line R 7154 Drawer Track Guide Kit Prime Line R 7145 Drawer Track Backplate Amerock Allison BP814WD Round Cabinet Knob
Yellow polyethylene guide and white polyethylene side saddles, restores smooth operation to track mounted drawers. Fits a 3/32" x 1-9/32" track. Contents: 2 guides, 4 side saddles, and 2 sets of installation fasteners. Used to hold track to back of cabinet; fits most popular side mount rails. Contents: 2 backplates; 2 sets of installation screws. Unfinished wood knob. Use with one #8-32 x 1" type screw.
Prime Line R 7084 Drawer Track Guide Kit Prime Line R 7082 Drawer Track Guide Kit Prime Line R 7130 Drawer Track Guide Kit
Brown polyethylene guide and white polyethylene side saddles, restores smooth operation to track mounted drawers. Fits a 1/4" x 7/8" track. Contents: 2 guides, 4 side saddles, and 2 sets of installation fasteners. Red polyethylene guide and white polyethylene side saddles, restores smooth operation to track mounted drawers. Fits a 9/32" x 3/4" track. Contents: 2 guides, 4 side saddles, and 2 sets of installation fasteners. Purple polyethylene guide and white side saddles. Guides used for aligning drawer and making for a smoother operation. Fits a 3/32" x 1-3/16" track. Contents: 2 guides, 4 side saddles, and 2 sets of installation fasteners. Designed for use with metal rolled-edge tracks.
Prime Line R 7131 Drawer Track Back Socket Schlage C9110B3 Decorative Hasp HASP DECO ORB 5/8X1-7/8IN
Mounts horizontally or vertically. Used on Amerock Tri-roller drawer slide track. (Track fits snug). 5/8" x 1-7/8". With screws. Designed for small chests, jewelry boxes, craft projects, etc. Surface mount for easy installation. Fasteners included. Visual-pack.
HASP DECO STN NKL 5/8X1-7/8IN M-D 03434 Closed-Cell Insulating Wall Plate Sealer M-D 87916 Closed-Cell Receptacle Insulating Wall Plate Sealer
National Decorative Hasp, Series: V1824, 1-7/8 in Length, 5/8 in Width, Steel, Satin Nickel, Includes: Screws 6 Closed-cell foam sealers. UL and GSA approved. 6 Closed-cell foam sealers. UL and GSA approved.
Schlage C9210F3RH Right Hand Support Hinge Schlage C9120B3 Decorative Hasp Schlage C9210F3LH Left Hand Support Hinge
Made of steel. .547" x 10-3/8". 3/4" x 2-3/4". With screws. Made of steel. .547" x 10-3/8".
Knape & Vogt 1284-4WP Rear Mouth Socket Rear Mounting Bracket Prime Line R 7147 Flat Stepped Drawer Guide Roller Assembly Schlage C907 Decorative Cabinet Hinge
Optional bracket for use with draw slide No.1284. Rollers mount at the front of the drawer opening, and help center the drawer. This allows for smoother operation. Flat stepped roller edge type, mixed materials. Includes 1 left hand roller, 1 right hand roller, and 1 set of installation fasteners. Schlage Cabinet Hinge, Decorative, Series: C907, 6 Holes, 1-5/16 in Door Leaf Length, 2-1/4 in Door Leaf Width, Steel, Yellow, Bright Brass, Used in Fine Woodworking Projects
HINGE STN NKL 3/4X5/8IN       HINGE ORB 3/4X5/8IN           Schlage C9320B3 Corner Brace
HINGES 3/4X5/8IN ORB
Our Price: $3.03
National Hardware Hinge, Series: N211, 1/8 in Hole Diameter, 1/32 in Leaf Thickness, 3/4 in Door Leaf Length, 3/4 in Frame Leaf Length, Surface Mounting, 3/4 in Overall Length, 5/8 in Overall Width, Steel, Satin Nickel, Includes: Fasteners Designed for small chests, jewelry boxes, craft projects, etc. Decorative design. Surface mount for easy installation. Fasteners included. Visual-pack. Intended for use with woodworking projects. For durability, this furniture bracket has added gauge thickness and a solid brass construction. Designed to prevent screws from stripping. With brass screws.
CATCH DECO ORB                CATCH DECO STN NKL            Prime Line R 7148 Convex Drawer Track Roller
DECORATIVE CATCHES ORB
Our Price: $3.20
For use on cabinets, boxes and chests. For right or left hand applications. Surface mount for easy installation. Fasteners included. Visual-pack. National Hardware Hook and Staple, Series: V1841, 5/32 in Diameter, 1/16 in Thickness, Surface Mounting, Steel, Satin Nickel, Includes: Fasteners, For Cabinets, Boxes and Chests, Right or Left Hand Applications Steel bracket, convex plastic roller mounts on rear of drawer. Used as center roller for monorail drawer slide systems. Contains: 2 roller assemblies, 2 sets of installation screws.
National Hardware V1880 Padlock Amerock Allison 573ABS Bail Pull HINGE ORB 1X1IN
PADLOCKS ANT BRS
Our Price: $3.27
HINGES 1X1IN ORB
Our Price: $3.33
National Hardware Padlock, Series: V1880, Steel Shackle, Die Cast Zinc Body, Antique Brass, For Padlock Jewelry Boxes, Small Chests, etc Pull with 3" centers, 3-13/16"L  x  2-3/4"W. Designed for small chests, jewelry boxes, craft projects, etc. Decorative design. Surface mount for easy installation. Fasteners included. Visual-pack.
HINGE STN NKL 1X1IN           National Hardware V1824 Decorative Lockout Hasp National Hardware V1813 Decorative Hinge
HINGES 1X1IN STN NCKL
Our Price: $3.33
National Hardware Broad Hinge, Series: V1802, 4 Holes, 1/8 in Hole Diameter, 0.8 mm Leaf Thickness, Surface Mounting, 1 in Overall Length, 1 in Overall Width, Steel, Satin Nickel Plated, Includes: Fasteners, For Small Chests, Jewelry Boxes and Craft Projects National Hardware Lockout Hasp, Decorative, Series: V1824, 1/8 in Diameter Shackle, 1-7/8 in Length, 5/8 in Height, Solid Brass, Includes: Fasteners, For Small Chests, Jewelry Boxes and Craft Projects National Hardware Decorative Hinge, Series: V1813, 4 Holes, 0.08 in Hole Diameter, 0.02 in Leaf Thickness, 1-1/8 in Door Leaf Length, 1-1/8 in Frame Leaf Length, 0.08 in Diameter Pin, Surface Mounting, Fasteners: Screws, 1-1/8 in Overall Width, Solid Brass, Antique Brass, For Small Chests, Jewelry Boxes and Craft Projects
National Hardware V1824 Decorative Lockout Hasp Schlage C9321B3 Corner Brace National Hardware 2062BC Hitch Ring Eyes
National Hardware Lockout Hasp, Decorative, Series: V1824, 0.12 in Diameter Shackle, 1-7/8 in Length, 5/8 in Height, Antique Brass, Includes: Fasteners, For Small Chests, Jewelry Boxes and Craft Projects Intended for use with woodworking projects. For durability, this furniture bracket has added gauge thickness and a solid brass construction. Designed to prevent screws from stripping. With brass screws. National Hardware Hitch Ring, Series: 2062BC, 2 in OD Ring, 5/16 in Wire Diameter, 3-1/4 in Length Screw, 90 lb Load Capacity, Fasteners: Screws, Steel, Zinc Plated, 1.62 in Thread Length, For Animal Tie Downs and Other Home and Farm Applications
Prime Line R 7141 Drawer Track Roller National Hardware N211-201 Decorative Narrow Hinge HINGE ANT BRASS 5/8X1IN
HINGES 5/8X1IN ANT BRS
Our Price: $3.50
Steel bracket, convex plastic roller mounts on rear of drawer. Used as center roller for monorail drawer slide systems. Contains: 2 roller assemblies, 2 sets of installation screws. National Hardware Narrow Hinge, Decorative, Series: V1800, 4 Holes, 0.14 in Hole Diameter, 0.02 in Leaf Thickness, 3/4 in Door Leaf Length, 3/4 in Frame Leaf Length, 0.08 in Diameter Pin, Surface Mounting, Fasteners: Screws, 2 lb Load Capacity, 5/8 in Overall Width, Solid Brass, Antique Brass, For Small Chests, Jewelry Boxes and Craft Projects National Hardware Decorative Hinge, Series: V1816, 4 Holes, 0.08 in Hole Diameter, 0.02 in Leaf Thickness, 0.08 in Dia Pin, 5/8 in Overall Length, 1 in Overall Width, Solid Brass, Antique Brass
National Hardware V1816 Decorative Hinge National Hardware V1846 Snap Catch Schlage C9130B3 Decorative Hasp
HINGES 5/8X1IN SLD BRS
Our Price: $3.50
CATCHES ANT BRS
Our Price: $3.50
National Hardware Decorative Hinge, Series: V1816, 4 Holes, 0.08 in Hole Diameter, 0.02 in Leaf Thickness, 5/8 in Door Leaf Length, 5/8 in Frame Leaf Length, 0.08 in Diameter Pin, Fasteners: Screws, 1 in Overall Width, Solid Brass, Solid Brass National Hardware Snap Catch, Series: V1846, 0.116 in Mounting Hole, Fasteners: Concealed Screw, 0.91 in Overall Width, Steel, Antique Brass, For Small Chests, Jewelry Boxes and Craft Projects 3/4" x 2-3/4". With screws.
Schlage C907 Decorative Cabinet Hinge DOOR SEAL CORNER BROWN        Schlage C9340F3 Chest Handle
DOOR SEAL CORNER BROWN
Our Price: $3.54
Schlage Cabinet Hinge, Decorative, Series: C907, 6 Holes, 1-5/16 in Door Leaf Length, 2-1/4 in Door Leaf Width, Solid Brass, Yellow, Bright Brass, Used in Fine Woodworking Projects Self-adhesive seals protect door corners from drafts, dirt, rain and pests. Can be trimmed to fit. 2 per package. 1-3/8" x 3-1/2". With screws.
National Hardware N211-185 Decorative Narrow Hinge BRACKET RR MT F/MDL 84-8450 ZN Prime Line R 7132 Drawer Track Back Roller with Plastic Roller
HINGES 1X3/4IN ANT BRS
Our Price: $3.60
National Hardware Narrow Hinge, Decorative, Series: V1800, 4 Holes, 0.14 in Hole Diameter, 0.02 in Leaf Thickness, 1 in Door Leaf Length, 1 in Frame Leaf Length, 0.08 in Diameter Pin, Surface Mounting, Fasteners: Screws, 2 lb Load Capacity, 3/4 in Overall Width, Solid Brass, Antique Brass, For Small Chests, Jewelry Boxes and Craft Projects Optional rear mounting socket for face frame application simplifies installation. Non handed. Hardware included.  3-1/2" L x 0.50"W. Zinc finish. Steel bracket, convex plastic roller mounts on rear of drawer. Used as center roller for monorail drawer slide systems. Contents: 2 roller assemblies, 2 sets of installation screws.
National Hardware V1811 Decorative Hinge National Hardware V1863 Luggage Handle National Hardware N211-193 Decorative Narrow Hinge
National Hardware Decorative Hinge, Series: V1811, 5 Holes, 0.08 in Hole Diameter, 0.02 in Leaf Thickness, 5/8 in Door Leaf Length, 5/8 in Frame Leaf Length, 0.08 in Diameter Pin, Surface Mounting, Fasteners: Screws, 1-7/8 in Overall Width, Solid Brass, Solid Brass, For Small Chests, Jewelry Boxes and Craft Projects National Hardware Luggage Handle, Series: V1863, Suitable For Use With: Luggage, Chests and Sample Cases, 6 in Size, Plastic, Steel Plates, Brown, 5.93 in Length X 0.5 in Width X 2.55 in Height, For Quick and Easy Surface Mounted Applications National Hardware Narrow Hinge, Decorative, Series: V1800, 4 Holes, 0.14 in Hole Diameter, 0.02 in Leaf Thickness, 3/4 in Door Leaf Length, 3/4 in Frame Leaf Length, 0.08 in Diameter Pin, Surface Mounting, Fasteners: Screws, 2 lb Load Capacity, 5/8 in Overall Width, Solid Brass, Solid Brass, For Small Chests, Jewelry Boxes and Craft Projects
National Hardware N211-417 Decorative Hinge National Hardware N211-425 Decorative Hinge Schlage C9330F3 Draw Catch
National Hardware Decorative Hinge, Series: V1810, 6 Holes, 0.08 in Hole Diameter, 0.02 in Leaf Thickness, 5/8 in Door Leaf Length, 5/8 in Frame Leaf Length, 0.08 in Diameter Pin, Fasteners: Screws, 2-3/4 in Overall Width, Solid Brass, Solid Brass National Hardware Decorative Hinge, Series: V1810, 6 Holes, 0.08 in Hole Diameter, 0.02 in Leaf Thickness, 5/8 in Door Leaf Length, 5/8 in Frame Leaf Length, 0.08 in Diameter Pin, Fasteners: Screws, 2-3/4 in Overall Width, Solid Brass, Antique Brass 2-3/4" x 1-1/2". With screws.
HINGE ORB 1-1/2X1-1/4IN       HINGE STN NKL 1-1/2X1-1/4IN   BRACKET RR MT F/MDL TT100 ZINC
Designed for small chests, jewelry boxes, craft projects, etc. Decorative design. Surface mount for easy installation. Fasteners included. Visual-pack. National Hardware Broad Hinge, Series: V1802, 4 Holes, 11/64 in Hole Diameter, 0.8 mm Leaf Thickness, Surface Mounting, 1-1/2 in Overall Length, 1-1/4 in Overall Width, Steel, Satin Nickel Plated, Includes: Fasteners, For Small Chests, Jewelry Boxes and Craft Projects Optional rear mounting socket for face frame application simplifies installation. Non handed. Hardware included.  3-1/2" L x 0.50"W. Zinc finish.
National Hardware V30 Non-Swivel Safety Hasp HINGE ORB 2X1-3/8IN           HINGE STN NKL 2X1-3/8IN
HINGES 2X1-3/8IN ORB
Our Price: $3.98
National Hardware Safety Hasp, Non-Swivel, Series: V30, 0.34 in Diameter X 0.62 in Height Shackle, 2.43 in Length, 3/4 in Height, Hot Rolled Steel, Brass, Includes: Rigid Non-Swivel Staple, BHMA A138.18 Certified, 1-3/4 in, For Securing a Wide Variety of Doors, Cabinets, Boxes and Trunks Designed for small chests, jewelry boxes, craft projects, etc. Decorative design. Surface mount for easy installation. Fasteners included. Visual-pack. National Hardware Broad Hinge, Series: V1802, 6 Holes, 5/32 in Hole Diameter, 1.2 mm Leaf Thickness, Surface Mounting, 2 in Overall Length, 1-3/8 in Overall Width, Steel, Satin Nickel Plated, Includes: Fasteners, For Small Chests, Jewelry Boxes and Craft Projects
National Hardware N211-342 Decorative Broad Hinge National Hardware V1801 Narrow Hinge National Hardware V1826 Decorative Lockout Hasp
HINGES 1X1IN ANT BRS
Our Price: $4.01
National Hardware Broad Hinge, Decorative, Series: V1802, 4 Holes, 0.14 in Hole Diameter, 0.02 in Leaf Thickness, 1 in Door Leaf Length, 1 in Frame Leaf Length, 0.08 in Diameter Pin, Surface Mounting, Fasteners: Screws, 2 lb Load Capacity, 1 in Overall Width, Solid Brass, Antique Brass, For Small Chests, Jewelry Boxes and Craft Projects National Hardware Narrow Hinge, Series: V1801, 0.14 in Hole Diameter, 0.02 in Leaf Thickness, 3/4 in Door Leaf Length, 3/4 in Frame Leaf Length, 0.08 in Diameter Pin, Wall Mounting, Fasteners: Screws, 2 lb Load Capacity, 11/16 in Overall Width, Solid Brass, For Bookcases and Kitchen Cabinets National Hardware Lockout Hasp, Decorative, Series: V1826, 2-3/4 in Length, 3/4 in Height, Antique Brass
SUPPORT FOLDING BRASS         National Hardware V1826 Decorative Lockout Hasp National Hardware V1890L Left Side Folding Support
FOLDING SUPPORTS BRS
Our Price: $4.18
FOLDING SUPPORTS BRS
Our Price: $4.18
Used to support table legs, shelves and chest lids. Prevents a lid from slamming shut. Includes fasteners. National Hardware Lockout Hasp, Decorative, Series: V1826, 2-3/4 in Length, 3/4 in Height, Solid Brass National Hardware Folding Support, Left Side, Series: V1890L, 6-7/8 in Length, Steel, Brass, Includes: Fasteners, For used to support table legs, shelves and chest lids
National Hardware V1890R Right Side Folding Support National Hardware N211-177 Decorative Narrow Hinge BRACKET REAR MNT F/MDL 1805 ZN
FOLDING SUPPORTS BRS
Our Price: $4.18
HINGES 1X3/4IN SLD BRS
Our Price: $4.26
National Hardware Folding Support, Right Side, Series: V1890R, 9 in Length, 1.38 in Width, 0.1 in Thickness, Steel, Brass, Includes: Fasteners, For used to support table legs, shelves and chest lids National Hardware Narrow Hinge, Decorative, Series: V1800, 4 Holes, 0.14 in Hole Diameter, 0.02 in Leaf Thickness, 1 in Door Leaf Length, 1 in Frame Leaf Length, 0.08 in Diameter Pin, Surface Mounting, Fasteners: Screws, 2 lb Load Capacity, 3/4 in Overall Width, Solid Brass, Solid Brass, For Small Chests, Jewelry Boxes and Craft Projects Pair of rear brackets (left and right) for the 1805 epoxy-coated drawer slide features a 2-3/8" socket.
Schlage C9220F3RH Right Hand Friction Lid Support Schlage C9220F3LH Left Hand Friction Lid Support National Hardware N211-219 Decorative Narrow Hinge
With screws. With screws. National Hardware Narrow Hinge, Decorative, Series: V1800, 4 Holes, 0.16 in Hole Diameter, 0.04 in Leaf Thickness, 1-1/2 in Door Leaf Length, 1-1/2 in Frame Leaf Length, 0.1 in Diameter Pin, Surface Mounting, Fasteners: Screws, 5 lb Load Capacity, 7/8 in Overall Width, Solid Brass, Solid Brass, For Small Chests, Jewelry Boxes and Craft Projects
National Hardware N211-227 Decorative Narrow Hinge Stanley 220657 Medium Weight Hitch Ring Schlage C9311B3 Decorative Corner
National Hardware Narrow Hinge, Decorative, Series: V1800, 4 Holes, 0.16 in Hole Diameter, 0.04 in Leaf Thickness, 1-1/2 in Door Leaf Length, 1-1/2 in Frame Leaf Length, 0.1 in Diameter Pin, Surface Mounting, Fasteners: Screws, 5 lb Load Capacity, 7/8 in Overall Width, Solid Brass, Antique Brass, For Small Chests, Jewelry Boxes and Craft Projects Medium-weight hitching ring is for animal tie-downs and other home and farm applications. Includes 2" inside diameter ring #0 wire, welded (.300 diameter). 3/8" diameter screw eye. Boxed. 5/8" x 1-3/4". With screws.
National Hardware N211-821 Decorative Hinge National Hardware N211-839 Decorative Hinge Stanley 220616 Medium Weight Hitch Ring with Plate
National Hardware Decorative Hinge, Series: V1814, 6 Holes, 0.21 in Hole Diameter, 0.04 in Leaf Thickness, 1.36 in Door Leaf Length, 1.36 in Frame Leaf Length, 0.1 in Diameter Pin, Fasteners: Screws, 2-1/4 in Overall Width, Solid Brass, Solid Brass National Hardware Decorative Hinge, Series: V1814, 6 Holes, 0.21 in Hole Diameter, 0.04 in Leaf Thickness, 1.36 in Door Leaf Length, 1.36 in Frame Leaf Length, 0.1 in Diameter Pin, Fasteners: Screws, 2-1/4 in Overall Width, Solid Brass, Antique Brass Medium-weight hitching ring is designed for animal tie-downs and other home and farm applications. Includes 2" inside diameter ring #0 wire, welded. Plate is punched for #14 screws or 1/4"  bolts. Boxed.
National Hardware V1841 Hooks and Staple Stanley 220624 Medium Weight Hitch Ring National Hardware V1802 Decorative Broad Hinge
HINGES 3/4X1IN SLD BRS
Our Price: $4.56
National Hardware Hooks and Staple, Series: V1841, Surface Mounting, Suitable For Use With: Cabinets, Boxes and Chests, Solid Brass, Solid Brass Medium-weight hitching ring is designed for animal tie-downs and other home and farm applications. Includes 2" inside diameter ring #0 wire, welded. (.300 diameter). Includes nut. 3/8" eye bolt diameter. Boxed. National Hardware Broad Hinge, Decorative, Series: V1802, 4 Holes, 0.14 in Hole Diameter, 0.02 in Leaf Thickness, 3/4 in Door Leaf Length, 3/4 in Frame Leaf Length, 0.08 in Diameter Pin, Surface Mounting, Fasteners: Screws, 2 lb Load Capacity, 1 in Overall Width, Solid Brass, Solid Brass, For Small Chests, Jewelry Boxes and Craft Projects
Stanley 220632 Medium Weight Hitch Ring Frost King DS7W/25 Kerf Door Seal Frost King DS7B/25 Kerf Door Seal
Medium-weight hitching ring is designed for animal tie-downs and other home and farm applications. Includes 2" inside diameter ring #0 wire, welded. (.300 diameter). Includes nut. 3/8" eye bolt diameter. Boxed. Seals doors with 1/8" x 11/32" kerfs. Superior resistance to low temperature and will fill gaps up to 11/16". Kerf installation and no fasteners required. Seals doors with 1/8" x 11/32" kerfs. Superior resistance to low temperature and will fill gaps up to 11/16". Kerf installation and no fasteners required.
Prime Line R 7240 Right Hand/Left Hand Drawer Track Back Plate National Hardware V1849 Lockable Draw Catch M-D Ultra Kerf Weatherstrip
DRAW CATCHES BRS
Our Price: $4.65
White nylon; 2-3/4"socket depth allows 2"of front to back adjustment of the rail; used on side mounted drawer track systems. Raw finish. Contents: 1 left hand bracket; 1 right hand bracket; 2 sets of installation screws. NOTE: Right side has a larger lip. National Hardware Draw Catch, Lockable, Series: V1849, 0.3 in Bore, Surface Mounting, 0.16 in Mounting Hole, Suitable For Use With: Padlocks, 0.12 in Wire Diameter, 1.76 in Overall Width, 3.64 in Overall Height, Steel, Bright Brass, For used to secure trunks, chests, cases, tool boxes and other items Replacement compression weather strip, constructed of vinyl clad foam. Recommended for commercial or residential use. Kerf installation and no fasteners required.
M-D Ultra Kerf Weatherstrip National Hardware V1848 Draw Catch National Hardware V1801 Narrow Hinge
DRAW CATCHES BRS
Our Price: $4.74
Replacement compression weather strip, constructed of vinyl clad foam. Recommended for commercial or residential use. Kerf installation and no fasteners required. National Hardware Draw Catch, Series: V1848, Surface Mounting, 0.16 in Mounting Hole, 0.12 in Wire Diameter, 1.76 in Overall Width, 3.64 in Overall Height, Steel, Bright Brass, For used to secure trunks, chests, cases, tool boxes and other items National Hardware Narrow Hinge, Series: V1801, 0.16 in Hole Diameter, 0.04 in Leaf Thickness, 1-1/2 in Door Leaf Length, 1-1/2 in Frame Leaf Length, 0.1 in Diameter Pin, Wall Mounting, Fasteners: Screws, 5 lb Load Capacity, 1 in Overall Width, Solid Brass, For Bookcases and Kitchen Cabinets
National Hardware V1801 Narrow Hinge National Hardware N211-334 Decorative Broad Hinge National Hardware V1875 Corner Brace
HINGES 1X1IN SLD BRS
Our Price: $4.85
National Hardware Narrow Hinge, Series: V1801, 0.14 in Hole Diameter, 0.02 in Leaf Thickness, 1 in Door Leaf Length, 1 in Frame Leaf Length, 0.08 in Diameter Pin, Wall Mounting, Fasteners: Screws, 2 lb Load Capacity, 13/16 in Overall Width, Solid Brass, For Bookcases and Kitchen Cabinets National Hardware Broad Hinge, Decorative, Series: V1802, 4 Holes, 0.14 in Hole Diameter, 0.02 in Leaf Thickness, 1 in Door Leaf Length, 1 in Frame Leaf Length, 0.08 in Diameter Pin, Surface Mounting, Fasteners: Screws, 2 lb Load Capacity, 1 in Overall Width, Solid Brass, Solid Brass, For Small Chests, Jewelry Boxes and Craft Projects National Hardware Corner Brace, Series: V1875, 1 in Length, 1/2 in Height, 0.06 in Thickness, 2 Mounting Holes, 0.29 in Diameter Mounting Hole, Solid Brass, Brass, Includes: Screws
National Hardware V1891 Friction Lid Support National Hardware V1818 Decorative Hinge National Hardware V1840 Decorative Door Catch
LID SUPPORTS BRS
Our Price: $4.85
National Hardware Friction Lid Support, Series: V1891, 5-3/4 in Overall Length, Screw Mounting, 0.18 in Mounting Hole, Fasteners: Screws, Steel, Brass, Includes: Mounting Screws, For Use to Support Lids on Boxes, Chests National Hardware Decorative Hinge, Series: V1818, 6 Holes, 0.16 in Hole Diameter, 0.04 in Leaf Thickness, 3/4 in Door Leaf Length, 3/4 in Frame Leaf Length, 0.1 in Diameter Pin, Fasteners: Screws, 1-13/16 in Overall Width, Solid Brass, Solid Brass National Hardware Door Catch, Decorative, Series: V1840, Surface Mounting, 1.32 in Overall Height, Solid Brass, Solid Brass
National Hardware V1840 Decorative Door Catch National Hardware V1864 Chest Handle National Hardware N211-359 Decorative Broad Hinge
National Hardware Door Catch, Decorative, Series: V1840, 1.32 in Overall Height, Solid Brass, Antique Brass National Hardware Chest Handle, Series: V1864, 3-1/2 in, Steel, Brass, 3.42 in Length X 2.34 in Width, Includes: (4) Screws National Hardware Broad Hinge, Decorative, Series: V1802, 4 Holes, 0.16 in Hole Diameter, 0.04 in Leaf Thickness, 1-1/2 in Door Leaf Length, 1-1/2 in Frame Leaf Length, 0.04 in Diameter Pin, Surface Mounting, Fasteners: Screws, 5 lb Load Capacity, 1-1/4 in Overall Width, Solid Brass, Solid Brass, For Small Chests, Jewelry Boxes and Craft Projects
National Hardware V1828 Lockout Hasp With Hooks National Hardware V1828 Lockout Hasp With Hooks National Hardware N211-367 Decorative Broad Hinge
National Hardware Lockout Hasp, Series: V1828, 2-3/4 in Length, 3/4 in Height, Solid Brass National Hardware Lockout Hasp, Series: V1828, 2-3/4 in Length, 3/4 in Height, Antique Brass National Hardware Broad Hinge, Decorative, Series: V1802, 4 Holes, 0.16 in Hole Diameter, 0.04 in Leaf Thickness, 1-1/2 in Door Leaf Length, 1-1/2 in Frame Leaf Length, 0.04 in Diameter Pin, Surface Mounting, Fasteners: Screws, 5 lb Load Capacity, 1-1/4 in Overall Width, Solid Brass, Antique Brass, For Small Chests, Jewelry Boxes and Craft Projects
Prime-Line R 7321 Drawer Track Guide and Glide Schlage C907 Decorative Cabinet Hinge Prime Line R 7125 Undermount Drawer Track Kit
Used on furniture drawer systems; for dressers, hutches and night stand drawers. Opening for metal track on larger piece measures 15/16" x 3/32". Kit includes 2 dark-brown, plastic track case guides and 2 track guides, 4 white, plastic corner glides, 8 ring shank nails for nailing in corner glides (3/4" x 14-1/2 ga.), and 8 Phillips drive, pan head screws for installation of guides (#6 x 5/8"). Schlage Cabinet Hinge, Decorative, Series: C907, 6 Holes, 1-3/4 in Door Leaf Length, 3 in Door Leaf Width, Solid Brass, Antique Brass Rolled edge galvanized steel track with polyethylene guides and nylon front rollers. Track may be cut down for shorter drawer and can be used for top or bottom mount installations. Contents: 1 track; 1 front plate; 1 back plate; 1 drawer guide; 2 front rollers; 1 set of installation fasteners.
National Hardware N211-235 Decorative Narrow Hinge National Hardware N211-243 Decorative Narrow Hinge National Hardware N203-760 Chest Handle
HINGES 2X1IN SLD BRS
Our Price: $5.24
HINGES 2X1IN ANT BRS
Our Price: $5.24
National Hardware Narrow Hinge, Decorative, Series: V1800, 6 Holes, 0.21 in Hole Diameter, 0.04 in Leaf Thickness, 2 in Door Leaf Length, 2 in Frame Leaf Length, 0.1 in Diameter Pin, Surface Mounting, Fasteners: Screws, 5 lb Load Capacity, 1 in Overall Width, Solid Brass, Solid Brass, For Small Chests, Jewelry Boxes and Craft Projects National Hardware Narrow Hinge, Decorative, Series: V1800, 6 Holes, 0.21 in Hole Diameter, 0.04 in Leaf Thickness, 2 in Door Leaf Length, 2 in Frame Leaf Length, 0.1 in Diameter Pin, Surface Mounting, Fasteners: Screws, 5 lb Load Capacity, 1 in Overall Width, Solid Brass, Antique Brass, For Small Chests, Jewelry Boxes and Craft Projects National Hardware Chest Handle, Series: V175, Suitable For Use With: Small Chests and Boxes, 3-1/2 in, 200 lb Safe Working Load, Steel, Zinc Plated, 3.35 in Length X 2.74 in Height, BHMA A138.18
National Hardware V1875 Corner Brace National Hardware V35 Draw Hasp Knape & Vogt 1805HWH400 Euro Self-Close Drawer Slide
National Hardware Corner Brace, Series: V1875, 1-1/2 in Length, 5/8 in Height, 0.06 in Thickness, 4 Mounting Holes, 1/4 in Diameter Mounting Hole, Solid Brass, Brass, Includes: Screws National Hardware Draw Hasp, Series: V35, 2.79 in Length, 0.76 in Height, Steel, Zinc Plated, Includes: Matching Round Head Phillips Screws, 2-3/4 in, For Doors, Tool Boxes, Gates and Cabinets Specially designed for use in kitchen cabinet, commercial millwork, home office and RTA furniture applications. Adaptable to face frame or 32mm mounting. Single captive roller limits side play for improved lateral stability. Positive double out-stop. Positive in-stop. Lift-out disconnect. Four way adjustment slots. Positive lock-open position. Cabinet member side mounts. Additional rear mounting socket available for face frame applications. Drawer member fastens to either side or bottom of drawer. Height 1.4". Required Clearance; Side: 1/2" plus 1/32" minus 0 each side. Top:1" required for drawer lift out. Bottom: None drawer can rest on cabinet. Packed with screws and installation instructions. Maximum drawer width 18".
National Hardware V1801 Narrow Hinge Amerock BP2355AE Furniture Trim Butt Hinge National Hardware N211-854 Decorative Hinge
National Hardware Narrow Hinge, Series: V1801, 0.21 in Hole Diameter, 0.04 in Leaf Thickness, 2 in Door Leaf Length, 2 in Frame Leaf Length, 0.1 in Diameter Pin, Wall Mounting, Fasteners: Screws, 5 lb Load Capacity, 1-3/16 in Overall Width, Solid Brass, For Bookcases and Kitchen Cabinets Polybagged. National Hardware Decorative Hinge, Series: V1814, 6 Holes, 0.23 in Hole Diameter, 0.04 in Leaf Thickness, 1.7 in Door Leaf Length, 1.7 in Frame Leaf Length, 0.1 in Diameter Pin, Fasteners: Screws, 3.06 in Overall Width, Solid Brass, Antique Brass
National Hardware N211-847 Decorative Hinge National Hardware V1842 Draw Catch Knape & Vogt 1805HWH450 Euro Self-Close Drawer Slide
DRAW CATCHES BRS
Our Price: $5.59
National Hardware Decorative Hinge, Series: V1814, 6 Holes, 0.23 in Hole Diameter, 0.04 in Leaf Thickness, 1.7 in Door Leaf Length, 1.7 in Frame Leaf Length, 0.1 in Diameter Pin, Fasteners: Screws, 3.06 in Overall Width, Solid Brass, Solid Brass National Hardware Draw Catch, Series: V1842, Surface Mounting, 0.13 in Mounting Hole, 0.6 in, 0.12 in Wire Diameter, 0.99 in Overall Width, 2.46 in Overall Height, Steel, Bright Brass, For used to secure trunks, chests, cases, tool boxes and other items Specially designed for use in kitchen cabinet, commercial millwork, home office and RTA furniture applications. Adaptable to face frame or 32mm mounting. Single captive roller limits side play for improved lateral stability. Positive double out-stop. Positive in-stop. Lift-out disconnect. Four way adjustment slots. Positive lock-open position. Cabinet member side mounts. Additional rear mounting socket available for face frame applications. Drawer member fastens to either side or bottom of drawer. Height 1.4". Required Clearance; Side: 1/2" plus 1/32" minus 0 each side. Top:1" required for drawer lift out. Bottom: None drawer can rest on cabinet. Packed with screws and installation instructions. Maximum drawer width 18".
Knape & Vogt 1175P ZC 20 Light Duty Single Track Drawer Slide SLIDE DRWR 75LB 300MM WHT 12IN Knape & Vogt 1175P ZC 22-5/8 Light Duty Single Track Drawer Slide
Light-Duty slide designed for general drawer applications. Mounts with staples or screws. Height: 1". Required Clearance:1/8" each side; 1-1/2" from rear of drawer to cabinet; drawer to be 3/8" shallower than opening. High density polyethylene rollers. Drawers lift out for easy removal. Packaged with screws and installation instructions. Specially designed for use in kitchen cabinet, commercial millwork, home office and RTA furniture applications. Adaptable to face frame or 32mm mounting. Single captive roller limits side play for improved lateral stability. Positive double out-stop. Positive in-stop. Lift-out disconnect. Four way adjustment slots. Positive lock-open position. Cabinet member side mounts. Additional rear mounting socket available for face frame applications. Drawer member fastens to either side or bottom of drawer. Height 1.4". Required Clearance; Side: 1/2" plus 1/32" minus 0 each side. Top:1" required for drawer lift out. Bottom: None drawer can rest on cabinet. Packed with screws and installation instructions. Maximum drawer width 18". Light-Duty slide designed for general drawer applications. Mounts with staples or screws. Height: 1". Required Clearance:1/8" each side; 1-1/2" from rear of drawer to cabinet; drawer to be 3/8" shallower than opening. High density polyethylene rollers. Drawers lift out for easy removal. Packaged with screws and installation instructions.
National Hardware N211-375 Decorative Broad Hinge National Hardware V1851 Decorative Corner Brace National Hardware V1851 Decorative Corner Brace
National Hardware Broad Hinge, Decorative, Series: V1802, 6 Holes, 0.04 in Leaf Thickness, 2 in Door Leaf Length, 2 in Frame Leaf Length, 0.01 in Diameter Pin, Surface Mounting, Fasteners: Screws, 5 lb Load Capacity, 1-3/8 in Overall Width, Solid Brass, Solid Brass, For Small Chests, Jewelry Boxes and Craft Projects National Hardware Corner Brace, Decorative, Series: V1851, 1-1/4 in Length, 9/16 in Height, 0.02 in Thickness, 2 Mounting Holes, 0.116 in Diameter Mounting Hole, Solid Brass, Brass Plated National Hardware Corner Brace, Decorative, Series: V1851, 1-1/4 in Length, 9/16 in Height, 0.02 in Thickness, 2 Mounting Holes, 0.116 in Diameter Mounting Hole, Solid Brass, Antique Brass
National Hardware N211-383 Decorative Broad Hinge National Hardware V1851 Decorative Corner Brace HANDLE CHEST ZN PLT 3-1/2IN
National Hardware Broad Hinge, Decorative, Series: V1802, 6 Holes, 0.04 in Leaf Thickness, 2 in Door Leaf Length, 2 in Frame Leaf Length, 0.01 in Diameter Pin, Surface Mounting, Fasteners: Screws, 5 lb Load Capacity, 1-3/8 in Overall Width, Solid Brass, Antique Brass, For Small Chests, Jewelry Boxes and Craft Projects National Hardware Corner Brace, Decorative, Series: V1851, 1-3/4 in Length, 5/8 in Height, 0.02 in Thickness, 3 Mounting Holes, 0.116 in Diameter Mounting Hole, Solid Brass, Brass Plated Designed for small chests and boxes. Handle allows for in use hand clearance. Easy grip handle. Safe working load 200 lbs.
Knape & Vogt 1805HWH500 Euro Self-Close Drawer Slide National Hardware V1843 Lockable Draw Catch Knape & Vogt 1175P ZC 24 Light Duty Single Track Drawer Slide
DRAW CATCHES ZN PLT
Our Price: $5.92
Specially designed for use in kitchen cabinet, commercial millwork, home office and RTA furniture applications. Adaptable to face frame or 32mm mounting. Single captive roller limits side play for improved lateral stability. Positive double out-stop. Positive in-stop. Lift-out disconnect. Four way adjustment slots. Positive lock-open position. Cabinet member side mounts. Additional rear mounting socket available for face frame applications. Drawer member fastens to either side or bottom of drawer. Height 1.4". Required Clearance; Side: 1/2" plus 1/32" minus 0 each side. Top:1" required for drawer lift out. Bottom: None drawer can rest on cabinet. Packed with screws and installation instructions. Maximum drawer width 18". National Hardware Draw Catch, Lockable, Series: V1843, 0.3 in Bore, Surface Mounting, 0.13 in Mounting Hole, 1.22 in, Suitable For Use With: Padlocks, 1.65 in Overall Width, 2.59 in Overall Height, Steel, Zinc Plated, For used to secure trunks, chests, cases, tool boxes and other items Light-Duty slide designed for general drawer applications. Mounts with staples or screws. Height: 1". Required Clearance:1/8" each side; 1-1/2" from rear of drawer to cabinet; drawer to be 3/8" shallower than opening. High density polyethylene rollers. Drawers lift out for easy removal. Packaged with screws and installation instructions.
HINGE ANT BRASS 1-1/2X1-1/4IN National Hardware V1893L Spring Lid Support National Hardware V1893R Spring Lid Support
LID SUPPORTS ANT BRS
Our Price: $6.03
LID SUPPORTS ANT BRS
Our Price: $6.03
Designed for small chests, jewelry boxes, craft projects, etc. Surface mount for easy installation. Screws included. Clear lacquer protective coating. Visual-pack. National Hardware Spring Lid Support, Left Handed, Series: V1893L, 5-1/2 in Overall Length, Screw Mounting, Fasteners: Screws, Steel, Antique Brass, Includes: Mounting Screws, For Use to Support Lids on Boxes, Chests National Hardware Spring Lid Support, Right Handed, Series: V1893R, 5-1/2 in Overall Length, Screw Mounting, Fasteners: Screws, Steel, Antique Brass, Includes: Mounting Screws, For Use to Support Lids on Boxes, Chests
National Hardware V1893C Center Handed Spring Lid Support National Hardware V35 Draw Hasp National Hardware N117-002 Chest Handle
LID SUPPORTS ANT BRS
Our Price: $6.03
DRAW HASPS 2-3/4IN BRS
Our Price: $6.08
National Hardware Spring Lid Support, Center Handed, Series: V1893C, 5-1/2 in Overall Length, Screw Mounting, Fasteners: Screws, Steel, Antique Brass, Includes: Mounting Screws, For Use to Support Lids on Boxes, Chests National Hardware Draw Hasp, Series: V35, 2.79 in Length, 0.76 in Height, Steel, Brass Rivets, Brass, 2-3/4 in, For Doors, Tool Boxes, Gates and Cabinets National Hardware Chest Handle, Series: V175, Suitable For Use With: Small Chests and Boxes, 3-1/2 in, 200 lb Safe Working Load, Steel, Zinc Plated, 4.23 in Length X 0.46 in Width X 3.53 in Height, BHMA A138.18
National Hardware V1892R Friction Lid Support National Hardware V1892L Friction Lid Support Knape & Vogt 1805HWH550 Euro Self-Close Drawer Slide
LID SUPPORTS BRS
Our Price: $6.09
LID SUPPORTS BRS
Our Price: $6.09
National Hardware Friction Lid Support, Right Handed, Series: V1892R, 5-1/2 in Overall Length, Screw Mounting, 0.18 in Mounting Hole, Fasteners: Screws, Steel, Brass, Includes: Mounting Screws, For Use to Support Lids on Boxes, Chests National Hardware Friction Lid Support, Left Handed, Series: V1892L, 5 in Overall Length, Screw Mounting, Fasteners: Screws, Steel, Brass, Includes: Mounting Screws, For Use to Support Lids on Boxes, Chests Specially designed for use in kitchen cabinet, commercial millwork, home office and RTA furniture applications. Adaptable to face frame or 32mm mounting. Single captive roller limits side play for improved lateral stability. Positive double out-stop. Positive in-stop. Lift-out disconnect. Four way adjustment slots. Positive lock-open position. Cabinet member side mounts. Additional rear mounting socket available for face frame applications. Drawer member fastens to either side or bottom of drawer. Height 1.4". Required Clearance; Side: 1/2" plus 1/32" minus 0 each side. Top:1" required for drawer lift out. Bottom: None drawer can rest on cabinet. Packed with screws and installation instructions. Maximum drawer width 18".
National Hardware V1854 Decorative Corner Brace National Hardware N211-250 Decorative Narrow Hinge National Hardware N211-268 Decorative Narrow Hinge
National Hardware Corner Brace, Decorative, Series: V1854, 1-1/4 in Length, 0.04 in Thickness, 3 Mounting Holes, 0.04 in Diameter Mounting Hole, Steel, Brass National Hardware Narrow Hinge, Decorative, Series: V1800, 6 Holes, 0.22 in Hole Diameter, 0.05 in Leaf Thickness, 2-1/2 in Door Leaf Length, 2-1/2 in Frame Leaf Length, 0.1 in Diameter Pin, Surface Mounting, Fasteners: Screws, 6 lb Load Capacity, 1.13 in Overall Width, Solid Brass, Solid Brass, For Small Chests, Jewelry Boxes and Craft Projects National Hardware Narrow Hinge, Decorative, Series: V1800, 6 Holes, 0.22 in Hole Diameter, 0.05 in Leaf Thickness, 2-1/2 in Door Leaf Length, 2-1/2 in Frame Leaf Length, 0.1 in Diameter Pin, Surface Mounting, Fasteners: Screws, 6 lb Load Capacity, 1-1/8 in Overall Width, Solid Brass, Antique Brass, For Small Chests, Jewelry Boxes and Craft Projects
National Hardware V1805 Decorative Desk Hinge National Hardware N135-301 Decorative Cabinet Hinge HINGE ANT BRASS 1-1/2X7/8IN
National Hardware Desk Hinge, Decorative, Series: V1805, 6 Holes, 0.21 in Hole Diameter, 0.04 in Leaf Thickness, 1-1/2 in Door Leaf Length, 1-1/2 in Frame Leaf Length, 0.1 in Diameter Pin, Surface, Flush Mounting, Fasteners: Screws, 5 lb Load Capacity, 2 in Overall Width, Solid Brass, For Desks, Lids, Chests, Cabinets and Table Leaves National Hardware Cabinet Hinge, Decorative, Series: V485, 6 Holes, 0.05 in Leaf Thickness, 1.66 in Door Leaf Length, 1-1/4 in Door Leaf Width, 1.66 in Frame Leaf Length, 1-1/4 in Frame Leaf Width, 1/8 in Diameter Pin, Surface Mounting, 8 lb Load Capacity, 2.81 in Overall Length, 2.81 in Overall Width, 0.05 in Overall Depth, Cold Rolled Steel National Hardware Ball Tip Hinge, Series: V1816, 4 Holes, 0.16 in Hole Diameter, 0.04 in Leaf Thickness, 1-1/2 in Door Leaf Length, 0.1 in Dia Pin, Surface Mounting, 5 lb Load Capacity, 7/8 in Overall Length, 2 in Overall Width, Solid Brass, Antique Brass, Includes: Solid Brass Screws, For Small Chests, Jewelry Boxes and Craft Projects
M-D 78196 Door Gasket Weatherstrip National Hardware V1801 Narrow Hinge National Hardware N211-391 Decorative Broad Hinge
Flexible vinyl bulb mounts directly to door jamb using nails or staples. Gasket compresses tightly against door when door is closed forming a tight seal that resists moisture and air infiltration. National Hardware Narrow Hinge, Series: V1801, 0.23 in Hole Diameter, 0.05 in Leaf Thickness, 2-1/2 in Door Leaf Length, 2-1/2 in Frame Leaf Length, 0.1 in Diameter Pin, Wall Mounting, Fasteners: Screws, 6 lb Load Capacity, 1-9/16 in Overall Width, Solid Brass, For Bookcases and Kitchen Cabinets National Hardware Broad Hinge, Decorative, Series: V1802, 6 Holes, 0.23 in Hole Diameter, 0.05 in Leaf Thickness, 2-1/2 in Door Leaf Length, 2-1/2 in Frame Leaf Length, 0.01 in Diameter Pin, Surface Mounting, Fasteners: Screws, 6 lb Load Capacity, 13/4 in Overall Width, Solid Brass, Solid Brass, For Small Chests, Jewelry Boxes and Craft Projects
National Hardware N211-409 Decorative Broad Hinge National Hardware N261-768 Decorative Ball Tip Hinge National Hardware N213-553 Decorative Ball Tip Hinge
National Hardware Broad Hinge, Decorative, Series: V1802, 6 Holes, 0.23 in Hole Diameter, 0.05 in Leaf Thickness, 2-1/2 in Door Leaf Length, 2-1/2 in Frame Leaf Length, 0.01 in Diameter Pin, Surface Mounting, Fasteners: Screws, 6 lb Load Capacity, 1-3/4 in Overall Width, Solid Brass, Antique Brass, For Small Chests, Jewelry Boxes and Craft Projects National Hardware Ball Tip Hinge, Decorative, Series: V1806, 6 Holes, 0.21 in Hole Diameter, 0.04 in Leaf Thickness, 2 in Door Leaf Length, 2 in Frame Leaf Length, 0.1 in Diameter Pin, Surface Mounting, Fasteners: Screws, 5 lb Load Capacity, 2-1/2 in Overall Length, 1-3/8 in Overall Width, Solid Brass, Solid Brass, For Small Chests National Hardware Ball Tip Hinge, Decorative, Series: V1806, 6 Holes, 0.21 in Hole Diameter, 0.04 in Leaf Thickness, 2 in Door Leaf Length, 2 in Frame Leaf Length, 0.1 in Diameter Pin, Surface Mounting, Fasteners: Screws, 5 lb Load Capacity, 2-1/2 in Overall Length, 1-3/8 in Overall Width, Solid Brass, Antique Brass, For Small Chests
Knape & Vogt 1284PWH400 Euro Roller Slide National Hardware V1894 Table Leg Brace BRACE TABLE LEG BRASS 9-1/2IN
Medium-duty slide designed for kitchen cabinet and bathroom vanity applications. Adaptable to frame mounting and 32mm mounting system. Solid stud and captive roller reduces side play. Positive stop, lift-out disconnect, stay-closed design. Adjustment slots on both the drawer member and the cabinet member ease installation. Screws fasten to either side or bottom of drawer. Positive lock-out feature is ideal for pull out work surfaces. Height: 1-9/32". Required Clearance: 1/2" plus 1/32" minus 0 each side. 1" between overall drawer side height and cabinet opening height required for drawer insertion and removal. Packaged with screws and installation instructions. Maximum drawer width 18". National Hardware Table Leg Brace, Series: V1894, 9-1/2 in Length, Steel, Brass, Includes: Screws Used to support a drop leaf on a table. 1 pair per pack. Includes screws.
National Hardware V1812 Decorative Hinge National Hardware V35 Corrosion Resistant Draw Hasp HANDLE CHEST ZN PLT 3X3-1/2IN
DRAW HASPS 4IN ZN PLT
Our Price: $7.62
National Hardware Decorative Hinge, Series: V1812, 6 Holes, 0.22 in Hole Diameter, 0.06 in Leaf Thickness, 1-5/16 in Door Leaf Length, 1-5/16 in Frame Leaf Length, 0.15 in Diameter Pin, Surface Mounting, Fasteners: Screws, 2-7/8 in Overall Width, Solid Brass, Solid Brass, For Desks, Lids, Chests, Cabinets and Table Leaves National Hardware Draw Hasp, Corrosion Resistant, Series: V35, 4 in Length, Steel, Zinc Plated, Gray, Includes: Fasteners, For Doors, Cabinets, Boxes and Trunks Designed for use on chests and doors where handle sets flush with surface. Recessed handle for total flush mounting. Four screws included for secure mounting. Safe working load 100 lbs.
Knape & Vogt 1284PWH450 Drawer Slide National Hardware N135-335 Decorative Cabinet Hinge National Hardware V177 Flush Ring Pull
Medium-duty slide designed for kitchen cabinet and bathroom vanity applications. Adaptable to frame mounting and 32mm mounting system. Solid stud and captive roller reduces side play. Positive stop, lift-out disconnect, stay-closed design. Adjustment slots on both the drawer member and the cabinet member ease installation. Screws fasten to either side or bottom of drawer. Positive lock-out feature is ideal for pull out work surfaces. Height: 1-9/32". Required Clearance: 1/2" plus 1/32" minus 0 each side. 1" between overall drawer side height and cabinet opening height required for drawer insertion and removal. Packaged with screws and installation instructions. Maximum drawer width 18". National Hardware Cabinet Hinge, Decorative, Series: V485, 6 Holes, 0.05 in Leaf Thickness, 1.66 in Door Leaf Length, 1-1/4 in Door Leaf Width, 1.66 in Frame Leaf Length, 1-1/4 in Frame Leaf Width, 1/8 in Diameter Pin, Surface Mounting, 8 lb Load Capacity, 2.81 in Overall Length, 2.81 in Overall Width, 0.05 in Overall Depth, Cold Rolled Steel National Hardware Flush Ring Pull, Series: V177, Suitable For Use With: Chests and Doors Where Handle Sets Flush With Surface, Steel, Zinc Plated, 3 in Length X 3-1/2 in Width, BHMA A138.18
Knape & Vogt 1260P-16 Light Duty Drawer Slide Knape & Vogt 1284PALM500 Euro Roller Slide National Hardware V629 Flush/Full Inset Cabinet Hinge
Light-Duty slide designed for general cabinet, desk and fixture application. Height: 3-1/8". Required Clearance: 1/2" plus 1/32" minus 0 each side. Features Positive stop. Stay-closed design. Depress stop lever for drawer removal. Dust shielded ball bearing rollers. Packaged with screws and installation instructions. Maximum drawer width 18". Medium-duty slide designed for kitchen cabinet and bathroom vanity applications. Adaptable to frame mounting and 32mm mounting system. Solid stud and captive roller reduces side play. Positive stop, lift-out disconnect, stay-closed design. Adjustment slots on both the drawer member and the cabinet member ease installation. Screws fasten to either side or bottom of drawer. Positive lock-out feature is ideal for pull out work surfaces. Height: 1-9/32". Required Clearance: 1/2" plus 1/32" minus 0 each side. 1" between overall drawer side height and cabinet opening height required for drawer insertion and removal. Packaged with screws and installation instructions. Maximum drawer width 18". National Hardware Cabinet Hinge, Flush/Full Inset, Series: V629, 6 Holes, 0.23 in Hole Diameter, 0.06 in Leaf Thickness, 2-1/2 in Door Leaf Length, 2-1/2 in Frame Leaf Length, Removable Pin, 0.13 in Diameter Pin, 20 lb Load Capacity, 2-1/2 in Overall Width, Cold Rolled Steel, Brass, Includes: Mounting Screws, 170 deg Opening
Knape & Vogt 1284PWH500 Drawer Slide National Hardware V175 Chest Handle Knape & Vogt 1260P-18 Light Duty Drawer Slide
Medium-duty slide designed for kitchen cabinet and bathroom vanity applications. Adaptable to frame mounting and 32mm mounting system. Solid stud and captive roller reduces side play. Positive stop, lift-out disconnect, stay-closed design. Adjustment slots on both the drawer member and the cabinet member ease installation. Screws fasten to either side or bottom of drawer. Positive lock-out feature is ideal for pull out work surfaces. Height: 1-9/32". Required Clearance: 1/2" plus 1/32" minus 0 each side. 1" between overall drawer side height and cabinet opening height required for drawer insertion and removal. Packaged with screws and installation instructions. Maximum drawer width 18". National Hardware Chest Handle, Series: V175, Suitable For Use With: Small Chests and Boxes, 4 in, 180 lb Safe Working Load, Steel, Zinc Plated, 4.88 in Length X 0.58 in Width X 4.13 in Height, BHMA A138.18 Light-Duty slide designed for general cabinet, desk and fixture application. Height: 3-1/8". Required Clearance: 1/2" plus 1/32" minus 0 each side. Features Positive stop. Stay-closed design. Depress stop lever for drawer removal. Dust shielded ball bearing rollers. Packaged with screws and installation instructions. Maximum drawer width 18".
Knape & Vogt 1300P ZC 12 Drawer Slide Knape & Vogt 1284PALM550 Euro Roller Slide Knape & Vogt 1284PWH550 Drawer Slide
Designed for medium duty applications where a lever release is desired. For kitchen cabinet, vanity, desk and store fixture applications. Height: 3".  Required Clearance: 1/2" plus 1/32" minus 0 each side. Features Positive stop lever that prevents accidental drawer removal.  Zinc-plated cold rolled steel. Ball bearing nylon rollers. Packaged with screws and installation instructions. Maximum drawer width 18". Medium-duty slide designed for kitchen cabinet and bathroom vanity applications. Adaptable to frame mounting and 32mm mounting system. Solid stud and captive roller reduces side play. Positive stop, lift-out disconnect, stay-closed design. Adjustment slots on both the drawer member and the cabinet member ease installation. Screws fasten to either side or bottom of drawer. Positive lock-out feature is ideal for pull out work surfaces. Height: 1-9/32". Required Clearance: 1/2" plus 1/32" minus 0 each side. 1" between overall drawer side height and cabinet opening height required for drawer insertion and removal. Packaged with screws and installation instructions. Maximum drawer width 18". Medium-duty slide designed for kitchen cabinet and bathroom vanity applications. Adaptable to frame mounting and 32mm mounting system. Solid stud and captive roller reduces side play. Positive stop, lift-out disconnect, stay-closed design. Adjustment slots on both the drawer member and the cabinet member ease installation. Screws fasten to either side or bottom of drawer. Positive lock-out feature is ideal for pull out work surfaces. Height: 1-9/32". Required Clearance: 1/2" plus 1/32" minus 0 each side. 1" between overall drawer side height and cabinet opening height required for drawer insertion and removal. Packaged with screws and installation instructions. Maximum drawer width 18".
Knape & Vogt 1300P ZC 14 Drawer Slide National Hardware N135-194 Decorative Cabinet Hinge Knape & Vogt 1260P-20 Light Duty Drawer Slide
CABINET HINGES 1IN BRS
Our Price: $8.76
Designed for medium duty applications where a lever release is desired. For kitchen cabinet, vanity, desk and store fixture applications. Height: 3".  Required Clearance: 1/2" plus 1/32" minus 0 each side. Features Positive stop lever that prevents accidental drawer removal.  Zinc-plated cold rolled steel. Ball bearing nylon rollers. Packaged with screws and installation instructions. Maximum drawer width 18". National Hardware Cabinet Hinge, Decorative, Series: V475, 6 Holes, 0.05 in Leaf Thickness, 1-5/8 in Door Leaf Length, 1-1/2 in Door Leaf Width, 1-5/8 in Frame Leaf Length, 1-1/2 in Frame Leaf Width, Surface Mounting, 8 lb Load Capacity, 3 in Overall Width, Cold Rolled Steel, Brass, For Commercial/Industrial and Residential Applications Light-Duty slide designed for general cabinet, desk and fixture application. Height: 3-1/8". Required Clearance: 1/2" plus 1/32" minus 0 each side. Features Positive stop. Stay-closed design. Depress stop lever for drawer removal. Dust shielded ball bearing rollers. Packaged with screws and installation instructions. Maximum drawer width 18".
National Hardware V1805 Decorative Desk Hinge Knape & Vogt 1300P ZC 18 Drawer Slide Knape & Vogt 1300P ZC 16 Drawer Slide
National Hardware Desk Hinge, Decorative, Series: V1805, 6 Holes, 0.24 in Hole Diameter, 0.06 in Leaf Thickness, 2 in Door Leaf Length, 2 in Frame Leaf Length, 0.15 in Diameter Pin, Surface, Flush Mounting, Fasteners: Screws, 11 lb Load Capacity, 3-1/16 in Overall Width, Solid Brass, For Desks, Lids, Chests, Cabinets and Table Leaves Designed for medium duty applications where a lever release is desired. For kitchen cabinet, vanity, desk and store fixture applications. Height: 3".  Required Clearance: 1/2" plus 1/32" minus 0 each side. Features Positive stop lever that prevents accidental drawer removal.  Zinc-plated cold rolled steel. Ball bearing nylon rollers. Packaged with screws and installation instructions. Maximum drawer width 18". Designed for medium duty applications where a lever release is desired. For kitchen cabinet, vanity, desk and store fixture applications. Height: 3".  Required Clearance: 1/2" plus 1/32" minus 0 each side. Features Positive stop lever that prevents accidental drawer removal.  Zinc-plated cold rolled steel. Ball bearing nylon rollers. Packaged with screws and installation instructions. Maximum drawer width 18".
Knape & Vogt 1260P-22 Light Duty Drawer Slide National Hardware V35 Corrosion Resistant Draw Hasp Knape & Vogt PBP10016 Precision Drawer Slide
DRAW HASPS 4IN BLK
Our Price: $9.18
Light-Duty slide designed for general cabinet, desk and fixture application. Height: 3-1/8". Required Clearance: 1/2" plus 1/32" minus 0 each side. Features Positive stop. Stay-closed design. Depress stop lever for drawer removal. Dust shielded ball bearing rollers. Packaged with screws and installation instructions. Maximum drawer width 18". National Hardware Draw Hasp, Corrosion Resistant, Series: V35, 4 in Length, Steel, Black, Includes: Fasteners, For Doors, Cabinets, Boxes and Trunks Direct access mounting holes, precision ball bearings, telescopic action, non-handed design, and lever disconnect. Includes screws for installation. Height: 1-1/8". Clearance required: 1/2" plus 1/32" minus 0 each side. Maximum drawer width 24".
Knape & Vogt 1300P ZC 20 Drawer Slide National Hardware V1844 Lockable Draw Catch Knape & Vogt 1300P ZC 22 Drawer Slide
DRAW CATCHES ZN PLT
Our Price: $9.48
Designed for medium duty applications where a lever release is desired. For kitchen cabinet, vanity, desk and store fixture applications. Height: 3".  Required Clearance: 1/2" plus 1/32" minus 0 each side. Features Positive stop lever that prevents accidental drawer removal.  Zinc-plated cold rolled steel. Ball bearing nylon rollers. Packaged with screws and installation instructions. Maximum drawer width 18". National Hardware Draw Catch, Lockable, Series: V1844, 0.3 in Bore, Surface Mounting, 0.13 in Mounting Hole, 0.78 in, Suitable For Use With: Padlocks, 0.12 in Wire Diameter, 1.04 in Overall Width, 3.38 in Overall Height, Steel, Zinc Plated Designed for medium duty applications where a lever release is desired. For kitchen cabinet, vanity, desk and store fixture applications. Height: 3".  Required Clearance: 1/2" plus 1/32" minus 0 each side. Features Positive stop lever that prevents accidental drawer removal.  Zinc-plated cold rolled steel. Ball bearing nylon rollers. Packaged with screws and installation instructions. Maximum drawer width 18".
Knape & Vogt PBP10018 Precision Drawer Slide Knape & Vogt 1300P ZC 24 Drawer Slide DRAW HASP ZINC PLATED 5IN
DRAW HASPS 5IN ZN PLT
Our Price: $10.81
Direct access mounting holes, precision ball bearings, telescopic action, non-handed design, and lever disconnect. Includes screws for installation. Height: 1-1/8". Clearance required: 1/2" plus 1/32" minus 0 each side. Maximum drawer width 24". Designed for medium duty applications where a lever release is desired. For kitchen cabinet, vanity, desk and store fixture applications. Height: 3".  Required Clearance: 1/2" plus 1/32" minus 0 each side. Features Positive stop lever that prevents accidental drawer removal.  Zinc-plated cold rolled steel. Ball bearing nylon rollers. Packaged with screws and installation instructions. Maximum drawer width 18". Stanley Draw Hasp, Series: V35, 5 in Length, Steel, Zinc-Plated
HANDLE CHEST ZN PLT 5-1/4IN   Knape & Vogt PBP10020 Precision Drawer Slide First Alert/Brk Brands MT1 Test Kits
National Hardware Flush Chest Handle, Series: V176, 0.53 in Diameter, 5-1/4 in Length, 3.38 in Width, 4-1/4 in Depth, 0.53 in Plate, Steel, Zinc Plated, Standards: BHMA A138.18, For Trucks, Moving Vans and Animal Trailers Direct access mounting holes, precision ball bearings, telescopic action, non-handed design, and lever disconnect. Includes screws for installation. Height: 1-1/8". Clearance required: 1/2" plus 1/32" minus 0 each side. Maximum drawer width 24". Tests for and identifies various types of molds in the home or workplace. Everything needed for a complete mail-in mold test, including 6 test tapes, three polybags a test card, manual and preprinted return envelope. Lab analysis of $10 per sample submitted will specify the type of mold growth.
National Hardware V36 Weather Resistant Draw Hasp National Hardware V1896 Drop Leaf Support 10 in L M-D 01040 Door Jamb Weatherstrip
DRAW HASPS 2-3/4IN SS
Our Price: $11.21
National Hardware Draw Hasp, Weather Resistant, Series: V36, 2-3/4 in Length, Stainless Steel, Zinc Plated, Includes: Fasteners, BHMA A138.18 Certified, For Doors, Cabinets, Boxes and Trunks National Hardware Drop Leaf Support, Series: V1896, 10 in Length, Steel, Brown, 70 lb Load Capacity, For Use to Hold Up or Release Down Shelves or a Drop leaf Table Made of aluminum and vinyl. Nail fasteners for wood frame doors, screw fasteners for wood or steel frame doors. Fasteners included. Install on doorstop. Slotted fastener holes provide easy installation and adjustment. Includes 3 pieces.
Frost King VA17H Adjustable Screw-On Door Sweep Set M-D Platinum 91890 Replacement Door Jamb Weatherstrip M-D Platinum 91891 Replacement Door Jamb Weatherstrip
Durable extruded aluminum with a tubular vinyl strip. Nail-on or screw-on door set for 7' x 36" doors. 3/4" width. Replacement weather strip. Made from non-toxic recyclable material. Installs easily into slotted door jambs. Superior seal provides year round comfort. Replacement weather strip. Made from non-toxic recyclable material. Installs easily into slotted door jambs. Superior seal provides year round comfort.
DOOR WEATHER REPLC 84IN BEIGE M-D 01073 Top and Side Door Jamb Weatherstrip Kit Knape & Vogt PBP10022 Precision Drawer Slide
Replacement weather strip. Made from non-toxic recyclable material. Installs easily into slotted door jambs. Superior seal provides year round comfort. Made of aluminum and vinyl. Nail fasteners for wood frame doors, screw fasteners for wood or steel frame doors. Fasteners included. Install on doorstop. Slotted fastener holes provide easy installation and adjustment. Includes 3 pieces. Direct access mounting holes, precision ball bearings, telescopic action, non-handed design, and lever disconnect. Includes screws for installation. Height: 1-1/8". Clearance required: 1/2" plus 1/32" minus 0 each side. Maximum drawer width 24".
Frost King VA17WH Adjustable Screw-On Door Sweep Set First Alert/Brk Brands LT1 Test Kits First Alert RD1 Radon Test Kit
Durable extruded aluminum with a tubular vinyl strip. Nail-on or screw-on door set for 7' x 36" doors. 3/4" width. Test for lead on up to 4 separate surfaces with immediate results. Includes all needed materials, no additional fees required. 4 test packs. Carded. Charcoal test kit traps particle traces. Short term test takes only 2-3 days in home. Price includes lab analysis by an Environmental Protection Agency listed lab.
National Hardware V1870 Flush Ring Pull M-D 01958 Top and Side Door Jamb Weatherstrip Kit M-D 01156 Top and Side Door Jamb Weatherstrip Kit
National Hardware Flush Ring Pull, Series: V1870, Solid Brass, Solid Brass, 1-1/2 in Length X 0.09 in Width X 1-3/4 in Height, Includes: Mounting Screws, 1-3/8 in Size Made of aluminum and vinyl. Nail fasteners for wood frame doors, screw fasteners for wood or steel frame doors. Fasteners included. Install on doorstop. Slotted fastener holes provide easy installation and adjustment. Includes 3 pieces. Made of aluminum and vinyl. Nail fasteners for wood frame doors, screw fasteners for wood or steel frame doors. Fasteners included. Install on doorstop. Slotted fastener holes provide easy installation and adjustment. Includes 3 pieces.
M-D Ultra 68429 Door Jamb Weatherstrip 7/8 in X W 1/4 in T Knape & Vogt 8400P16 Full Extension Drawer Slide Knape & Vogt 8400P12 Full Extension Drawer Slide
WS003 1/4"H x 7/8" door jamb strip. .050" wall thickness. UL Listed, fire labeled, smoke tested, air infiltration. Includes 3 pieces. Medium-duty, precision slides for box drawer or pedestal file drawers up to 24" wide. For frame and frameless construction. May be used horizontal position with a reduced load rating of 30 pounds. Height:1-13/16" Clearance required: 1/2" plus 1/32" minus 0 each side. Features telescoping, full extension on precision steel ball bearings. 32mm hole pattern with direct access mounting. Lever disconnect for easy drawer removal. Ball retainer latch and ramps, for easy drawer insertion. Drawer adjustment without removal. Flexible mounting tabs self-adjust to side clearance. Metal ball retainer holds 3 bearings per inch of race for smooth and quiet motion. Polymer stop cushions. Non-handed. Packaged with screws and installation instructions. Medium-duty, precision slides for box drawer or pedestal file drawers up to 24" wide. For frame and frameless construction. May be used horizontal position with a reduced load rating of 30 pounds. Height:1-13/16" Clearance required: 1/2" plus 1/32" minus 0 each side. Features telescoping, full extension on precision steel ball bearings. 32mm hole pattern with direct access mounting. Lever disconnect for easy drawer removal. Ball retainer latch and ramps, for easy drawer insertion. Drawer adjustment without removal. Flexible mounting tabs self-adjust to side clearance. Metal ball retainer holds 3 bearings per inch of race for smooth and quiet motion. Polymer stop cushions. Non-handed. Packaged with screws and installation instructions.
M-D 49002 Door Jamb Weatherstrip WEATHER SEAL BRONZE 17FT ROLL Knape & Vogt 8400P14 Full Extension Drawer Slide
Made of aluminum and vinyl. Nail fasteners for wood frame doors, screw fasteners for wood or steel frame doors. Fasteners included. Install on doorstop. Slotted fastener holes provide easy installation and adjustment. Includes 3 pieces. Medium-duty, precision slides for box drawer or pedestal file drawers up to 24" wide. For frame and frameless construction. May be used horizontal position with a reduced load rating of 30 pounds. Height:1-13/16" Clearance required: 1/2" plus 1/32" minus 0 each side. Features telescoping, full extension on precision steel ball bearings. 32mm hole pattern with direct access mounting. Lever disconnect for easy drawer removal. Ball retainer latch and ramps, for easy drawer insertion. Drawer adjustment without removal. Flexible mounting tabs self-adjust to side clearance. Metal ball retainer holds 3 bearings per inch of race for smooth and quiet motion. Polymer stop cushions. Non-handed. Packaged with screws and installation instructions.
M-D 01305 V-Shape Door Jamb Weatherstrip Knape & Vogt 8400P18 Full Extension Drawer Slide Knape & Vogt 8400P20 Full Extension Drawer Slide