Home > HARDWARE > GENERAL HARDWARE > CABINET & DRAWER HARDWARE > LAZY SUSANS
Sort By:
1
Amerock Allison BP802PBK Round Cabinet Knob Amerock Allison BP802PW Round Cabinet Knob Amerock Allison 232WHT Round Cabinet Knob
Knob with 1-1/4" diameter x 3/4" height. Use with one #8-32 x 1" type screw. Knob with 1-1/4" diameter x 3/4" height. Use with one #8-32 x 1" type screw. Height 1, use with one #8-32 x 1" type screw.
Amerock Allison 69228 Round Plain Cabinet Knob Prime Line R 7133 Drawer Track Backplate Schlage C78B3 Gate Hook
Ceramic knob with 1-1/4" diameter x 1" height. Use with one #8-32 x 1" type screw. Can be inverted for self-adjusting application, used on rolled edge and other center mounted tracks. Dimensions: Hook: 1-1/2? long. Staple: 3/4? high x 15/16? wide.
Prime Line R 7085 Drawer Track Guide Kit Prime Line R 7152 Drawer Track Guide Kit Prime Line R 7154 Drawer Track Guide Kit
Polyethylene guide and white polyethylene side saddles, restores smooth operation to track mounted drawers. Fits a 9/32" x 1-1/8" track. Polyethylene guide and white polyethylene side saddles, restores smooth operation to track mounted drawers. Fits a 9/32" x 1-1/8" track. Yellow polyethylene guide and white polyethylene side saddles, restores smooth operation to track mounted drawers. Fits a 3/32" x 1-9/32" track. Contents: 2 guides, 4 side saddles, and 2 sets of installation fasteners.
Prime Line R 7145 Drawer Track Backplate Amerock Allison 217WHT Round Plain Cabinet Knob Prime Line R 7084 Drawer Track Guide Kit
Used to hold track to back of cabinet; fits most popular side mount rails. Contents: 2 backplates; 2 sets of installation screws. Height 1, use with one #8-32 x 1" type screw. Brown polyethylene guide and white polyethylene side saddles, restores smooth operation to track mounted drawers. Fits a 1/4" x 7/8" track. Contents: 2 guides, 4 side saddles, and 2 sets of installation fasteners.
Prime Line R 7082 Drawer Track Guide Kit M-D 65110 Z-Bar Carpet/Floor Edging Prime Line R 7130 Drawer Track Guide Kit
Red polyethylene guide and white polyethylene side saddles, restores smooth operation to track mounted drawers. Fits a 9/32" x 3/4" track. Contents: 2 guides, 4 side saddles, and 2 sets of installation fasteners. Use to create a finished edge where stretch-in carpeting meets adjacent floors. Install with tackstrip. Attach to tackstrip, roll carpet over edge of Z bar, and tap down. Purple polyethylene guide and white side saddles. Guides used for aligning drawer and making for a smoother operation. Fits a 3/32" x 1-3/16" track. Contents: 2 guides, 4 side saddles, and 2 sets of installation fasteners. Designed for use with metal rolled-edge tracks.
Prime Line R 7131 Drawer Track Back Socket Amerock Allison 221WHT Round Cabinet Knob Schlage C9110B3 Decorative Hasp
Mounts horizontally or vertically. Used on Amerock Tri-roller drawer slide track. (Track fits snug). Ceramic knob with 1-1/2" diameter x 1-1/16" height. Use with one #8-32 x 1" type screw. Pink Rose Insert. 5/8" x 1-7/8". With screws.
M-D 21501 Carpet Screw Nail Schlage C9120B3 Decorative Hasp Knape & Vogt 1284-4WP Rear Mouth Socket Rear Mounting Bracket
Carpet screw nails for use with M-D floor trims. Hammer screw nails into wood or concrete floors. Wooden pegs needed for concrete sub-floors. 3/4" x 2-3/4". With screws. Optional bracket for use with draw slide No.1284.
Amerock Allison 69128 Round Cabinet Knob HASP DECO ORB 5/8X1-7/8IN     HASP DECO STN NKL 5/8X1-7/8IN
Porcelain knob with 1-1/2" diameter x 15/16" height. Use with one #8-32 x 1" type screw. Designed for small chests, jewelry boxes, craft projects, etc. Surface mount for easy installation. Fasteners included. Visual-pack. National Decorative Hasp, Series: V1824, 1-7/8 in Length, 5/8 in Width, Steel, Satin Nickel, Includes: Screws
Schlage C907 Decorative Cabinet Hinge M-D 21485 Carpet Screw Nail HINGE STN NKL 3/4X5/8IN
Schlage Cabinet Hinge, Decorative, Series: C907, 6 Holes, 1-5/16 in Door Leaf Length, 2-1/4 in Door Leaf Width, Steel, Yellow, Bright Brass, Used in Fine Woodworking Projects Carpet screw nails for use with M-D floor trims. Hammer screw nails into wood or concrete floors. Wooden pegs needed for concrete sub-floors. National Hardware Hinge, Series: N211, 1/8 in Hole Diameter, 1/32 in Leaf Thickness, 3/4 in Door Leaf Length, 3/4 in Frame Leaf Length, Surface Mounting, 3/4 in Overall Length, 5/8 in Overall Width, Steel, Satin Nickel, Includes: Fasteners
HINGE ORB 3/4X5/8IN           Prime Line R 7147 Flat Stepped Drawer Guide Roller Assembly Amerock Traditional Classics 14303CB Crystal Cabinet Knob
HINGES 3/4X5/8IN ORB
Our Price: $3.20
Designed for small chests, jewelry boxes, craft projects, etc. Decorative design. Surface mount for easy installation. Fasteners included. Visual-pack. Rollers mount at the front of the drawer opening, and help center the drawer. This allows for smoother operation. Flat stepped roller edge type, mixed materials. Includes 1 left hand roller, 1 right hand roller, and 1 set of installation fasteners. Knob with 1-1/4" diameter. Use with one #8-32 x 1" type screw.
Amerock Allison 573ABS Bail Pull Prime Line R 7148 Convex Drawer Track Roller CATCH DECO ORB
DECORATIVE CATCHES ORB
Our Price: $3.39
Pull with 3" centers, 3-13/16"L  x  2-3/4"W. Steel bracket, convex plastic roller mounts on rear of drawer. Used as center roller for monorail drawer slide systems. Contains: 2 roller assemblies, 2 sets of installation screws. For use on cabinets, boxes and chests. For right or left hand applications. Surface mount for easy installation. Fasteners included. Visual-pack.
CATCH DECO STN NKL            National Hardware V1880 Padlock HINGE ORB 1X1IN
PADLOCKS ANT BRS
Our Price: $3.44
HINGES 1X1IN ORB
Our Price: $3.50
National Hardware Hook and Staple, Series: V1841, 5/32 in Diameter, 1/16 in Thickness, Surface Mounting, Steel, Satin Nickel, Includes: Fasteners, For Cabinets, Boxes and Chests, Right or Left Hand Applications National Hardware Padlock, Series: V1880, Steel Shackle, Die Cast Zinc Body, Antique Brass, For Padlock Jewelry Boxes, Small Chests, etc Designed for small chests, jewelry boxes, craft projects, etc. Decorative design. Surface mount for easy installation. Fasteners included. Visual-pack.
HINGE STN NKL 1X1IN           Schlage C9130B3 Decorative Hasp Schlage C907 Decorative Cabinet Hinge
HINGES 1X1IN STN NCKL
Our Price: $3.50
National Hardware Broad Hinge, Series: V1802, 4 Holes, 1/8 in Hole Diameter, 0.8 mm Leaf Thickness, Surface Mounting, 1 in Overall Length, 1 in Overall Width, Steel, Satin Nickel Plated, Includes: Fasteners, For Small Chests, Jewelry Boxes and Craft Projects 3/4" x 2-3/4". With screws. Schlage Cabinet Hinge, Decorative, Series: C907, 6 Holes, 1-5/16 in Door Leaf Length, 2-1/4 in Door Leaf Width, Solid Brass, Yellow, Bright Brass, Used in Fine Woodworking Projects
DOOR SEAL CORNER BROWN        National Hardware V1824 Decorative Lockout Hasp National Hardware V1813 Decorative Hinge
DOOR SEAL CORNER BROWN
Our Price: $3.54
Self-adhesive seals protect door corners from drafts, dirt, rain and pests. Can be trimmed to fit. 2 per package. National Hardware Lockout Hasp, Decorative, Series: V1824, 1/8 in Diameter Shackle, 1-7/8 in Length, 5/8 in Height, Solid Brass, Includes: Fasteners, For Small Chests, Jewelry Boxes and Craft Projects National Hardware Decorative Hinge, Series: V1813, 4 Holes, 0.08 in Hole Diameter, 0.02 in Leaf Thickness, 1-1/8 in Door Leaf Length, 1-1/8 in Frame Leaf Length, 0.08 in Diameter Pin, Surface Mounting, Fasteners: Screws, 1-1/8 in Overall Width, Solid Brass, Antique Brass, For Small Chests, Jewelry Boxes and Craft Projects
National Hardware V1824 Decorative Lockout Hasp Schlage C9340F3 Chest Handle BRACKET RR MT F/MDL 84-8450 ZN
National Hardware Lockout Hasp, Decorative, Series: V1824, 0.12 in Diameter Shackle, 1-7/8 in Length, 5/8 in Height, Antique Brass, Includes: Fasteners, For Small Chests, Jewelry Boxes and Craft Projects 1-3/8" x 3-1/2". With screws. Optional rear mounting socket for face frame application simplifies installation. Non handed. Hardware included.  3-1/2" L x 0.50"W. Zinc finish.
Prime Line R 7141 Drawer Track Roller National Hardware N211-201 Decorative Narrow Hinge HINGE ANT BRASS 5/8X1IN
HINGES 5/8X1IN ANT BRS
Our Price: $3.68
Steel bracket, convex plastic roller mounts on rear of drawer. Used as center roller for monorail drawer slide systems. Contains: 2 roller assemblies, 2 sets of installation screws. National Hardware Narrow Hinge, Decorative, Series: V1800, 4 Holes, 0.14 in Hole Diameter, 0.02 in Leaf Thickness, 3/4 in Door Leaf Length, 3/4 in Frame Leaf Length, 0.08 in Diameter Pin, Surface Mounting, Fasteners: Screws, 2 lb Load Capacity, 5/8 in Overall Width, Solid Brass, Antique Brass, For Small Chests, Jewelry Boxes and Craft Projects National Hardware Decorative Hinge, Series: V1816, 4 Holes, 0.08 in Hole Diameter, 0.02 in Leaf Thickness, 0.08 in Dia Pin, 5/8 in Overall Length, 1 in Overall Width, Solid Brass, Antique Brass
National Hardware V1816 Decorative Hinge National Hardware V1846 Snap Catch National Hardware N211-185 Decorative Narrow Hinge
HINGES 5/8X1IN SLD BRS
Our Price: $3.68
CATCHES ANT BRS
Our Price: $3.68
HINGES 1X3/4IN ANT BRS
Our Price: $3.80
National Hardware Decorative Hinge, Series: V1816, 4 Holes, 0.08 in Hole Diameter, 0.02 in Leaf Thickness, 5/8 in Door Leaf Length, 5/8 in Frame Leaf Length, 0.08 in Diameter Pin, Fasteners: Screws, 1 in Overall Width, Solid Brass, Solid Brass National Hardware Snap Catch, Series: V1846, 0.116 in Mounting Hole, Fasteners: Concealed Screw, 0.91 in Overall Width, Steel, Antique Brass, For Small Chests, Jewelry Boxes and Craft Projects National Hardware Narrow Hinge, Decorative, Series: V1800, 4 Holes, 0.14 in Hole Diameter, 0.02 in Leaf Thickness, 1 in Door Leaf Length, 1 in Frame Leaf Length, 0.08 in Diameter Pin, Surface Mounting, Fasteners: Screws, 2 lb Load Capacity, 3/4 in Overall Width, Solid Brass, Antique Brass, For Small Chests, Jewelry Boxes and Craft Projects
Schlage C9330F3 Draw Catch National Hardware V1811 Decorative Hinge Frost King H113FS/3 Fluted Carpet Bar
2-3/4" x 1-1/2". With screws. National Hardware Decorative Hinge, Series: V1811, 5 Holes, 0.08 in Hole Diameter, 0.02 in Leaf Thickness, 5/8 in Door Leaf Length, 5/8 in Frame Leaf Length, 0.08 in Diameter Pin, Surface Mounting, Fasteners: Screws, 1-7/8 in Overall Width, Solid Brass, Solid Brass, For Small Chests, Jewelry Boxes and Craft Projects Joins carpet with other types of flooring at a lower height. Covers seams and spaces.
National Hardware N211-193 Decorative Narrow Hinge National Hardware N211-417 Decorative Hinge National Hardware N211-425 Decorative Hinge
National Hardware Narrow Hinge, Decorative, Series: V1800, 4 Holes, 0.14 in Hole Diameter, 0.02 in Leaf Thickness, 3/4 in Door Leaf Length, 3/4 in Frame Leaf Length, 0.08 in Diameter Pin, Surface Mounting, Fasteners: Screws, 2 lb Load Capacity, 5/8 in Overall Width, Solid Brass, Solid Brass, For Small Chests, Jewelry Boxes and Craft Projects National Hardware Decorative Hinge, Series: V1810, 6 Holes, 0.08 in Hole Diameter, 0.02 in Leaf Thickness, 5/8 in Door Leaf Length, 5/8 in Frame Leaf Length, 0.08 in Diameter Pin, Fasteners: Screws, 2-3/4 in Overall Width, Solid Brass, Solid Brass National Hardware Decorative Hinge, Series: V1810, 6 Holes, 0.08 in Hole Diameter, 0.02 in Leaf Thickness, 5/8 in Door Leaf Length, 5/8 in Frame Leaf Length, 0.08 in Diameter Pin, Fasteners: Screws, 2-3/4 in Overall Width, Solid Brass, Antique Brass
Prime Line R 7132 Drawer Track Back Roller with Plastic Roller HINGE ORB 1-1/2X1-1/4IN       HINGE STN NKL 1-1/2X1-1/4IN
Steel bracket, convex plastic roller mounts on rear of drawer. Used as center roller for monorail drawer slide systems. Contents: 2 roller assemblies, 2 sets of installation screws. Designed for small chests, jewelry boxes, craft projects, etc. Decorative design. Surface mount for easy installation. Fasteners included. Visual-pack. National Hardware Broad Hinge, Series: V1802, 4 Holes, 11/64 in Hole Diameter, 0.8 mm Leaf Thickness, Surface Mounting, 1-1/2 in Overall Length, 1-1/4 in Overall Width, Steel, Satin Nickel Plated, Includes: Fasteners, For Small Chests, Jewelry Boxes and Craft Projects
National Hardware V30 Non-Swivel Safety Hasp BRACKET RR MT F/MDL TT100 ZINC HINGE ORB 2X1-3/8IN
HINGES 2X1-3/8IN ORB
Our Price: $4.18
National Hardware Safety Hasp, Non-Swivel, Series: V30, 0.34 in Diameter X 0.62 in Height Shackle, 2.43 in Length, 3/4 in Height, Hot Rolled Steel, Brass, Includes: Rigid Non-Swivel Staple, BHMA A138.18 Certified, 1-3/4 in, For Securing a Wide Variety of Doors, Cabinets, Boxes and Trunks Optional rear mounting socket for face frame application simplifies installation. Non handed. Hardware included.  3-1/2" L x 0.50"W. Zinc finish. Designed for small chests, jewelry boxes, craft projects, etc. Decorative design. Surface mount for easy installation. Fasteners included. Visual-pack.
HINGE STN NKL 2X1-3/8IN       Amerock Ceramics BP72530 Round Cabinet Knob National Hardware N211-342 Decorative Broad Hinge
HINGES 1X1IN ANT BRS
Our Price: $4.21
National Hardware Broad Hinge, Series: V1802, 6 Holes, 5/32 in Hole Diameter, 1.2 mm Leaf Thickness, Surface Mounting, 2 in Overall Length, 1-3/8 in Overall Width, Steel, Satin Nickel Plated, Includes: Fasteners, For Small Chests, Jewelry Boxes and Craft Projects Use with one #8-32 x 1" type screw. National Hardware Broad Hinge, Decorative, Series: V1802, 4 Holes, 0.14 in Hole Diameter, 0.02 in Leaf Thickness, 1 in Door Leaf Length, 1 in Frame Leaf Length, 0.08 in Diameter Pin, Surface Mounting, Fasteners: Screws, 2 lb Load Capacity, 1 in Overall Width, Solid Brass, Antique Brass, For Small Chests, Jewelry Boxes and Craft Projects
National Hardware V1801 Narrow Hinge BRACKET REAR MNT F/MDL 1805 ZN Shepherd 9547 Square Lazy Susan Turntable
National Hardware Narrow Hinge, Series: V1801, 0.14 in Hole Diameter, 0.02 in Leaf Thickness, 3/4 in Door Leaf Length, 3/4 in Frame Leaf Length, 0.08 in Diameter Pin, Wall Mounting, Fasteners: Screws, 2 lb Load Capacity, 11/16 in Overall Width, Solid Brass, For Bookcases and Kitchen Cabinets Pair of rear brackets (left and right) for the 1805 epoxy-coated drawer slide features a 2-3/8" socket. Ball-bearing for rotating book racks, business machine stands, serving trays, kitchen storage racks, etc.
National Hardware V1826 Decorative Lockout Hasp National Hardware V1826 Decorative Lockout Hasp National Hardware N211-177 Decorative Narrow Hinge
HINGES 1X3/4IN SLD BRS
Our Price: $4.47
National Hardware Lockout Hasp, Decorative, Series: V1826, 2-3/4 in Length, 3/4 in Height, Antique Brass National Hardware Lockout Hasp, Decorative, Series: V1826, 2-3/4 in Length, 3/4 in Height, Solid Brass National Hardware Narrow Hinge, Decorative, Series: V1800, 4 Holes, 0.14 in Hole Diameter, 0.02 in Leaf Thickness, 1 in Door Leaf Length, 1 in Frame Leaf Length, 0.08 in Diameter Pin, Surface Mounting, Fasteners: Screws, 2 lb Load Capacity, 3/4 in Overall Width, Solid Brass, Solid Brass, For Small Chests, Jewelry Boxes and Craft Projects
Frost King H113FB/3 Fluted Carpet Bar Prime Line R 7240 Right Hand/Left Hand Drawer Track Back Plate National Hardware N211-219 Decorative Narrow Hinge
Joins carpet with other types of flooring at a lower height. Covers seams and spaces. White nylon; 2-3/4"socket depth allows 2"of front to back adjustment of the rail; used on side mounted drawer track systems. Raw finish. Contents: 1 left hand bracket; 1 right hand bracket; 2 sets of installation screws. NOTE: Right side has a larger lip. National Hardware Narrow Hinge, Decorative, Series: V1800, 4 Holes, 0.16 in Hole Diameter, 0.04 in Leaf Thickness, 1-1/2 in Door Leaf Length, 1-1/2 in Frame Leaf Length, 0.1 in Diameter Pin, Surface Mounting, Fasteners: Screws, 5 lb Load Capacity, 7/8 in Overall Width, Solid Brass, Solid Brass, For Small Chests, Jewelry Boxes and Craft Projects
National Hardware N211-227 Decorative Narrow Hinge Frost King DS7W/25 Kerf Door Seal Frost King DS7B/25 Kerf Door Seal
National Hardware Narrow Hinge, Decorative, Series: V1800, 4 Holes, 0.16 in Hole Diameter, 0.04 in Leaf Thickness, 1-1/2 in Door Leaf Length, 1-1/2 in Frame Leaf Length, 0.1 in Diameter Pin, Surface Mounting, Fasteners: Screws, 5 lb Load Capacity, 7/8 in Overall Width, Solid Brass, Antique Brass, For Small Chests, Jewelry Boxes and Craft Projects Seals doors with 1/8" x 11/32" kerfs. Superior resistance to low temperature and will fill gaps up to 11/16". Kerf installation and no fasteners required. Seals doors with 1/8" x 11/32" kerfs. Superior resistance to low temperature and will fill gaps up to 11/16". Kerf installation and no fasteners required.
National Hardware N211-821 Decorative Hinge National Hardware N211-839 Decorative Hinge National Hardware V1841 Hooks and Staple
National Hardware Decorative Hinge, Series: V1814, 6 Holes, 0.21 in Hole Diameter, 0.04 in Leaf Thickness, 1.36 in Door Leaf Length, 1.36 in Frame Leaf Length, 0.1 in Diameter Pin, Fasteners: Screws, 2-1/4 in Overall Width, Solid Brass, Solid Brass National Hardware Decorative Hinge, Series: V1814, 6 Holes, 0.21 in Hole Diameter, 0.04 in Leaf Thickness, 1.36 in Door Leaf Length, 1.36 in Frame Leaf Length, 0.1 in Diameter Pin, Fasteners: Screws, 2-1/4 in Overall Width, Solid Brass, Antique Brass National Hardware Hooks and Staple, Series: V1841, Surface Mounting, Suitable For Use With: Cabinets, Boxes and Chests, Solid Brass, Solid Brass
M-D Ultra Kerf Weatherstrip M-D Ultra Kerf Weatherstrip Frost King H591FS/3 Fluted Carpet Bar
Replacement compression weather strip, constructed of vinyl clad foam. Recommended for commercial or residential use. Kerf installation and no fasteners required. Replacement compression weather strip, constructed of vinyl clad foam. Recommended for commercial or residential use. Kerf installation and no fasteners required. Joins carpet with other types of flooring at a lower height. Covers seams and spaces.
National Hardware V1802 Decorative Broad Hinge Amerock Traditional Classics 14303G10 Acrylic Round Crystal Cabinet Knob Amerock Traditional Classics 14303ORB Acrylic Round Crystal Cabinet Knob
HINGES 3/4X1IN SLD BRS
Our Price: $4.80
National Hardware Broad Hinge, Decorative, Series: V1802, 4 Holes, 0.14 in Hole Diameter, 0.02 in Leaf Thickness, 3/4 in Door Leaf Length, 3/4 in Frame Leaf Length, 0.08 in Diameter Pin, Surface Mounting, Fasteners: Screws, 2 lb Load Capacity, 1 in Overall Width, Solid Brass, Solid Brass, For Small Chests, Jewelry Boxes and Craft Projects Knob with 1-1/4" diameter. Use with one #8-32 x 1" type screw. Knob with 1-1/4" diameter. Use with one #8-32 x 1" type screw.
National Hardware V1849 Lockable Draw Catch Prime-Line R 7321 Drawer Track Guide and Glide Schlage C907 Decorative Cabinet Hinge
DRAW CATCHES BRS
Our Price: $4.88
National Hardware Draw Catch, Lockable, Series: V1849, 0.3 in Bore, Surface Mounting, 0.16 in Mounting Hole, Suitable For Use With: Padlocks, 0.12 in Wire Diameter, 1.76 in Overall Width, 3.64 in Overall Height, Steel, Bright Brass, For used to secure trunks, chests, cases, tool boxes and other items Used on furniture drawer systems; for dressers, hutches and night stand drawers. Opening for metal track on larger piece measures 15/16" x 3/32". Kit includes 2 dark-brown, plastic track case guides and 2 track guides, 4 white, plastic corner glides, 8 ring shank nails for nailing in corner glides (3/4" x 14-1/2 ga.), and 8 Phillips drive, pan head screws for installation of guides (#6 x 5/8"). Schlage Cabinet Hinge, Decorative, Series: C907, 6 Holes, 1-3/4 in Door Leaf Length, 3 in Door Leaf Width, Solid Brass, Antique Brass
National Hardware V1848 Draw Catch National Hardware V1801 Narrow Hinge National Hardware V1801 Narrow Hinge
DRAW CATCHES BRS
Our Price: $4.98
National Hardware Draw Catch, Series: V1848, Surface Mounting, 0.16 in Mounting Hole, 0.12 in Wire Diameter, 1.76 in Overall Width, 3.64 in Overall Height, Steel, Bright Brass, For used to secure trunks, chests, cases, tool boxes and other items National Hardware Narrow Hinge, Series: V1801, 0.16 in Hole Diameter, 0.04 in Leaf Thickness, 1-1/2 in Door Leaf Length, 1-1/2 in Frame Leaf Length, 0.1 in Diameter Pin, Wall Mounting, Fasteners: Screws, 5 lb Load Capacity, 1 in Overall Width, Solid Brass, For Bookcases and Kitchen Cabinets National Hardware Narrow Hinge, Series: V1801, 0.14 in Hole Diameter, 0.02 in Leaf Thickness, 1 in Door Leaf Length, 1 in Frame Leaf Length, 0.08 in Diameter Pin, Wall Mounting, Fasteners: Screws, 2 lb Load Capacity, 13/16 in Overall Width, Solid Brass, For Bookcases and Kitchen Cabinets
National Hardware N211-334 Decorative Broad Hinge National Hardware V1818 Decorative Hinge National Hardware V1840 Decorative Door Catch
HINGES 1X1IN SLD BRS
Our Price: $5.12
National Hardware Broad Hinge, Decorative, Series: V1802, 4 Holes, 0.14 in Hole Diameter, 0.02 in Leaf Thickness, 1 in Door Leaf Length, 1 in Frame Leaf Length, 0.08 in Diameter Pin, Surface Mounting, Fasteners: Screws, 2 lb Load Capacity, 1 in Overall Width, Solid Brass, Solid Brass, For Small Chests, Jewelry Boxes and Craft Projects National Hardware Decorative Hinge, Series: V1818, 6 Holes, 0.16 in Hole Diameter, 0.04 in Leaf Thickness, 3/4 in Door Leaf Length, 3/4 in Frame Leaf Length, 0.1 in Diameter Pin, Fasteners: Screws, 1-13/16 in Overall Width, Solid Brass, Solid Brass National Hardware Door Catch, Decorative, Series: V1840, Surface Mounting, 1.32 in Overall Height, Solid Brass, Solid Brass
National Hardware V1840 Decorative Door Catch National Hardware V1864 Chest Handle Frost King H591FB/3 Fluted Carpet Bar
National Hardware Door Catch, Decorative, Series: V1840, 1.32 in Overall Height, Solid Brass, Antique Brass National Hardware Chest Handle, Series: V1864, 3-1/2 in, Steel, Brass, 3.42 in Length X 2.34 in Width, Includes: (4) Screws Joins carpet with other types of flooring at a lower height. Covers seams and spaces.
National Hardware N211-359 Decorative Broad Hinge National Hardware V1828 Lockout Hasp With Hooks National Hardware V1828 Lockout Hasp With Hooks
National Hardware Broad Hinge, Decorative, Series: V1802, 4 Holes, 0.16 in Hole Diameter, 0.04 in Leaf Thickness, 1-1/2 in Door Leaf Length, 1-1/2 in Frame Leaf Length, 0.04 in Diameter Pin, Surface Mounting, Fasteners: Screws, 5 lb Load Capacity, 1-1/4 in Overall Width, Solid Brass, Solid Brass, For Small Chests, Jewelry Boxes and Craft Projects National Hardware Lockout Hasp, Series: V1828, 2-3/4 in Length, 3/4 in Height, Solid Brass National Hardware Lockout Hasp, Series: V1828, 2-3/4 in Length, 3/4 in Height, Antique Brass
National Hardware N211-367 Decorative Broad Hinge Prime Line R 7125 Undermount Drawer Track Kit Frost King H1591FS3 Fluted Carpet Bar
National Hardware Broad Hinge, Decorative, Series: V1802, 4 Holes, 0.16 in Hole Diameter, 0.04 in Leaf Thickness, 1-1/2 in Door Leaf Length, 1-1/2 in Frame Leaf Length, 0.04 in Diameter Pin, Surface Mounting, Fasteners: Screws, 5 lb Load Capacity, 1-1/4 in Overall Width, Solid Brass, Antique Brass, For Small Chests, Jewelry Boxes and Craft Projects Rolled edge galvanized steel track with polyethylene guides and nylon front rollers. Track may be cut down for shorter drawer and can be used for top or bottom mount installations. Contents: 1 track; 1 front plate; 1 back plate; 1 drawer guide; 2 front rollers; 1 set of installation fasteners. Joins carpet with other types of flooring at a lower height. Covers seams and spaces.
Knape & Vogt 1805HWH400 Euro Self-Close Drawer Slide Amerock BP2355AE Furniture Trim Butt Hinge National Hardware N211-235 Decorative Narrow Hinge
HINGES 2X1IN SLD BRS
Our Price: $5.50
Specially designed for use in kitchen cabinet, commercial millwork, home office and RTA furniture applications. Adaptable to face frame or 32mm mounting. Single captive roller limits side play for improved lateral stability. Positive double out-stop. Positive in-stop. Lift-out disconnect. Four way adjustment slots. Positive lock-open position. Cabinet member side mounts. Additional rear mounting socket available for face frame applications. Drawer member fastens to either side or bottom of drawer. Height 1.4". Required Clearance; Side: 1/2" plus 1/32" minus 0 each side. Top:1" required for drawer lift out. Bottom: None drawer can rest on cabinet. Packed with screws and installation instructions. Maximum drawer width 18". Polybagged. National Hardware Narrow Hinge, Decorative, Series: V1800, 6 Holes, 0.21 in Hole Diameter, 0.04 in Leaf Thickness, 2 in Door Leaf Length, 2 in Frame Leaf Length, 0.1 in Diameter Pin, Surface Mounting, Fasteners: Screws, 5 lb Load Capacity, 1 in Overall Width, Solid Brass, Solid Brass, For Small Chests, Jewelry Boxes and Craft Projects
National Hardware N211-243 Decorative Narrow Hinge National Hardware N203-760 Chest Handle National Hardware V35 Draw Hasp
HINGES 2X1IN ANT BRS
Our Price: $5.50
National Hardware Narrow Hinge, Decorative, Series: V1800, 6 Holes, 0.21 in Hole Diameter, 0.04 in Leaf Thickness, 2 in Door Leaf Length, 2 in Frame Leaf Length, 0.1 in Diameter Pin, Surface Mounting, Fasteners: Screws, 5 lb Load Capacity, 1 in Overall Width, Solid Brass, Antique Brass, For Small Chests, Jewelry Boxes and Craft Projects National Hardware Chest Handle, Series: V175, Suitable For Use With: Small Chests and Boxes, 3-1/2 in, 200 lb Safe Working Load, Steel, Zinc Plated, 3.35 in Length X 2.74 in Height, BHMA A138.18 National Hardware Draw Hasp, Series: V35, 2.79 in Length, 0.76 in Height, Steel, Zinc Plated, Includes: Matching Round Head Phillips Screws, 2-3/4 in, For Doors, Tool Boxes, Gates and Cabinets
M-D 78006 Fluted Carpet Trim National Hardware V1801 Narrow Hinge Knape & Vogt 1805HWH450 Euro Self-Close Drawer Slide
Covers, protects and provides a finished edge. Includes screw nails to secure trim to carpet. National Hardware Narrow Hinge, Series: V1801, 0.21 in Hole Diameter, 0.04 in Leaf Thickness, 2 in Door Leaf Length, 2 in Frame Leaf Length, 0.1 in Diameter Pin, Wall Mounting, Fasteners: Screws, 5 lb Load Capacity, 1-3/16 in Overall Width, Solid Brass, For Bookcases and Kitchen Cabinets Specially designed for use in kitchen cabinet, commercial millwork, home office and RTA furniture applications. Adaptable to face frame or 32mm mounting. Single captive roller limits side play for improved lateral stability. Positive double out-stop. Positive in-stop. Lift-out disconnect. Four way adjustment slots. Positive lock-open position. Cabinet member side mounts. Additional rear mounting socket available for face frame applications. Drawer member fastens to either side or bottom of drawer. Height 1.4". Required Clearance; Side: 1/2" plus 1/32" minus 0 each side. Top:1" required for drawer lift out. Bottom: None drawer can rest on cabinet. Packed with screws and installation instructions. Maximum drawer width 18".
Knape & Vogt 1175P ZC 20 Light Duty Single Track Drawer Slide SLIDE DRWR 75LB 300MM WHT 12IN Knape & Vogt 1175P ZC 22-5/8 Light Duty Single Track Drawer Slide
Light-Duty slide designed for general drawer applications. Mounts with staples or screws. Height: 1". Required Clearance:1/8" each side; 1-1/2" from rear of drawer to cabinet; drawer to be 3/8" shallower than opening. High density polyethylene rollers. Drawers lift out for easy removal. Packaged with screws and installation instructions. Specially designed for use in kitchen cabinet, commercial millwork, home office and RTA furniture applications. Adaptable to face frame or 32mm mounting. Single captive roller limits side play for improved lateral stability. Positive double out-stop. Positive in-stop. Lift-out disconnect. Four way adjustment slots. Positive lock-open position. Cabinet member side mounts. Additional rear mounting socket available for face frame applications. Drawer member fastens to either side or bottom of drawer. Height 1.4". Required Clearance; Side: 1/2" plus 1/32" minus 0 each side. Top:1" required for drawer lift out. Bottom: None drawer can rest on cabinet. Packed with screws and installation instructions. Maximum drawer width 18". Light-Duty slide designed for general drawer applications. Mounts with staples or screws. Height: 1". Required Clearance:1/8" each side; 1-1/2" from rear of drawer to cabinet; drawer to be 3/8" shallower than opening. High density polyethylene rollers. Drawers lift out for easy removal. Packaged with screws and installation instructions.
TURNTABLE LAZY SUSAN 6IN 500LB National Hardware N211-854 Decorative Hinge National Hardware N211-847 Decorative Hinge
Use for table and countertops or inside cabinets. National Hardware Decorative Hinge, Series: V1814, 6 Holes, 0.23 in Hole Diameter, 0.04 in Leaf Thickness, 1.7 in Door Leaf Length, 1.7 in Frame Leaf Length, 0.1 in Diameter Pin, Fasteners: Screws, 3.06 in Overall Width, Solid Brass, Antique Brass National Hardware Decorative Hinge, Series: V1814, 6 Holes, 0.23 in Hole Diameter, 0.04 in Leaf Thickness, 1.7 in Door Leaf Length, 1.7 in Frame Leaf Length, 0.1 in Diameter Pin, Fasteners: Screws, 3.06 in Overall Width, Solid Brass, Solid Brass
National Hardware V1842 Draw Catch Knape & Vogt 1805HWH500 Euro Self-Close Drawer Slide Knape & Vogt 1175P ZC 24 Light Duty Single Track Drawer Slide
DRAW CATCHES BRS
Our Price: $5.87
National Hardware Draw Catch, Series: V1842, Surface Mounting, 0.13 in Mounting Hole, 0.6 in, 0.12 in Wire Diameter, 0.99 in Overall Width, 2.46 in Overall Height, Steel, Bright Brass, For used to secure trunks, chests, cases, tool boxes and other items Specially designed for use in kitchen cabinet, commercial millwork, home office and RTA furniture applications. Adaptable to face frame or 32mm mounting. Single captive roller limits side play for improved lateral stability. Positive double out-stop. Positive in-stop. Lift-out disconnect. Four way adjustment slots. Positive lock-open position. Cabinet member side mounts. Additional rear mounting socket available for face frame applications. Drawer member fastens to either side or bottom of drawer. Height 1.4". Required Clearance; Side: 1/2" plus 1/32" minus 0 each side. Top:1" required for drawer lift out. Bottom: None drawer can rest on cabinet. Packed with screws and installation instructions. Maximum drawer width 18". Light-Duty slide designed for general drawer applications. Mounts with staples or screws. Height: 1". Required Clearance:1/8" each side; 1-1/2" from rear of drawer to cabinet; drawer to be 3/8" shallower than opening. High density polyethylene rollers. Drawers lift out for easy removal. Packaged with screws and installation instructions.
Frost King H1591FB3 Fluted Carpet Bar National Hardware N211-375 Decorative Broad Hinge National Hardware N211-383 Decorative Broad Hinge
Joins carpet with other types of flooring at a lower height. Covers seams and spaces. National Hardware Broad Hinge, Decorative, Series: V1802, 6 Holes, 0.04 in Leaf Thickness, 2 in Door Leaf Length, 2 in Frame Leaf Length, 0.01 in Diameter Pin, Surface Mounting, Fasteners: Screws, 5 lb Load Capacity, 1-3/8 in Overall Width, Solid Brass, Solid Brass, For Small Chests, Jewelry Boxes and Craft Projects National Hardware Broad Hinge, Decorative, Series: V1802, 6 Holes, 0.04 in Leaf Thickness, 2 in Door Leaf Length, 2 in Frame Leaf Length, 0.01 in Diameter Pin, Surface Mounting, Fasteners: Screws, 5 lb Load Capacity, 1-3/8 in Overall Width, Solid Brass, Antique Brass, For Small Chests, Jewelry Boxes and Craft Projects
M-D 79004 Fluted Carpet Trim Knape & Vogt 1805HWH550 Euro Self-Close Drawer Slide HANDLE CHEST ZN PLT 3-1/2IN
Covers, protects and provides a finished edge. Includes screw nails to secure trim to carpet. Specially designed for use in kitchen cabinet, commercial millwork, home office and RTA furniture applications. Adaptable to face frame or 32mm mounting. Single captive roller limits side play for improved lateral stability. Positive double out-stop. Positive in-stop. Lift-out disconnect. Four way adjustment slots. Positive lock-open position. Cabinet member side mounts. Additional rear mounting socket available for face frame applications. Drawer member fastens to either side or bottom of drawer. Height 1.4". Required Clearance; Side: 1/2" plus 1/32" minus 0 each side. Top:1" required for drawer lift out. Bottom: None drawer can rest on cabinet. Packed with screws and installation instructions. Maximum drawer width 18". Designed for small chests and boxes. Handle allows for in use hand clearance. Easy grip handle. Safe working load 200 lbs.
National Hardware V1843 Lockable Draw Catch HINGE ANT BRASS 1-1/2X1-1/4IN Shepherd 9548 Square Lazy Susan Turntable
DRAW CATCHES ZN PLT
Our Price: $6.23
National Hardware Draw Catch, Lockable, Series: V1843, 0.3 in Bore, Surface Mounting, 0.13 in Mounting Hole, 1.22 in, Suitable For Use With: Padlocks, 1.65 in Overall Width, 2.59 in Overall Height, Steel, Zinc Plated, For used to secure trunks, chests, cases, tool boxes and other items Designed for small chests, jewelry boxes, craft projects, etc. Surface mount for easy installation. Screws included. Clear lacquer protective coating. Visual-pack. Ball-bearing for rotating book racks, business machine stands, serving trays, kitchen storage racks, etc.
M-D 78071 Wide Fluted Carpet Trim National Hardware V35 Draw Hasp National Hardware N117-002 Chest Handle
DRAW HASPS 2-3/4IN BRS
Our Price: $6.42
Covers, protects and provides a finished edge. Includes screw nails to secure trim to carpet. National Hardware Draw Hasp, Series: V35, 2.79 in Length, 0.76 in Height, Steel, Brass Rivets, Brass, 2-3/4 in, For Doors, Tool Boxes, Gates and Cabinets National Hardware Chest Handle, Series: V175, Suitable For Use With: Small Chests and Boxes, 3-1/2 in, 200 lb Safe Working Load, Steel, Zinc Plated, 4.23 in Length X 0.46 in Width X 3.53 in Height, BHMA A138.18
National Hardware N211-250 Decorative Narrow Hinge National Hardware N211-268 Decorative Narrow Hinge National Hardware V1805 Decorative Desk Hinge
National Hardware Narrow Hinge, Decorative, Series: V1800, 6 Holes, 0.22 in Hole Diameter, 0.05 in Leaf Thickness, 2-1/2 in Door Leaf Length, 2-1/2 in Frame Leaf Length, 0.1 in Diameter Pin, Surface Mounting, Fasteners: Screws, 6 lb Load Capacity, 1.13 in Overall Width, Solid Brass, Solid Brass, For Small Chests, Jewelry Boxes and Craft Projects National Hardware Narrow Hinge, Decorative, Series: V1800, 6 Holes, 0.22 in Hole Diameter, 0.05 in Leaf Thickness, 2-1/2 in Door Leaf Length, 2-1/2 in Frame Leaf Length, 0.1 in Diameter Pin, Surface Mounting, Fasteners: Screws, 6 lb Load Capacity, 1-1/8 in Overall Width, Solid Brass, Antique Brass, For Small Chests, Jewelry Boxes and Craft Projects National Hardware Desk Hinge, Decorative, Series: V1805, 6 Holes, 0.21 in Hole Diameter, 0.04 in Leaf Thickness, 1-1/2 in Door Leaf Length, 1-1/2 in Frame Leaf Length, 0.1 in Diameter Pin, Surface, Flush Mounting, Fasteners: Screws, 5 lb Load Capacity, 2 in Overall Width, Solid Brass, For Desks, Lids, Chests, Cabinets and Table Leaves
National Hardware N135-301 Decorative Cabinet Hinge HINGE ANT BRASS 1-1/2X7/8IN   M-D 78196 Door Gasket Weatherstrip
National Hardware Cabinet Hinge, Decorative, Series: V485, 6 Holes, 0.05 in Leaf Thickness, 1.66 in Door Leaf Length, 1-1/4 in Door Leaf Width, 1.66 in Frame Leaf Length, 1-1/4 in Frame Leaf Width, 1/8 in Diameter Pin, Surface Mounting, 8 lb Load Capacity, 2.81 in Overall Length, 2.81 in Overall Width, 0.05 in Overall Depth, Cold Rolled Steel National Hardware Ball Tip Hinge, Series: V1816, 4 Holes, 0.16 in Hole Diameter, 0.04 in Leaf Thickness, 1-1/2 in Door Leaf Length, 0.1 in Dia Pin, Surface Mounting, 5 lb Load Capacity, 7/8 in Overall Length, 2 in Overall Width, Solid Brass, Antique Brass, Includes: Solid Brass Screws, For Small Chests, Jewelry Boxes and Craft Projects Flexible vinyl bulb mounts directly to door jamb using nails or staples. Gasket compresses tightly against door when door is closed forming a tight seal that resists moisture and air infiltration.
M-D 66092 Wide Smooth Carpet Bar M-D 79053 Fluted Carpet Gripper M-D 79079 Wide Fluted Carpet Trim
Covers and protects carpet edges to provide a finished appearance. Includes screw nails to secure trim. Fluted carpet gripper with teeth. Secures stretch-in carpet and protects carpet edge. Includes screw nails to secure trim. 1/2"H. Covers, protects and provides a finished edge. Includes screw nails to secure trim to carpet.
M-D 43854 Wide Fluted Carpet Trim M-D 43882 Fluted Carpet Gripper with Teeth Knape & Vogt 1284PWH400 Euro Roller Slide
Covers, protects and provides a finished edge. Includes screw nails to secure trim to carpet. Fluted carpet gripper with teeth. Secures stretch-in carpet and protects carpet edge. Includes screw nails to secure trim. 1/2"H. Medium-duty slide designed for kitchen cabinet and bathroom vanity applications. Adaptable to frame mounting and 32mm mounting system. Solid stud and captive roller reduces side play. Positive stop, lift-out disconnect, stay-closed design. Adjustment slots on both the drawer member and the cabinet member ease installation. Screws fasten to either side or bottom of drawer. Positive lock-out feature is ideal for pull out work surfaces. Height: 1-9/32". Required Clearance: 1/2" plus 1/32" minus 0 each side. 1" between overall drawer side height and cabinet opening height required for drawer insertion and removal. Packaged with screws and installation instructions. Maximum drawer width 18".
National Hardware V1801 Narrow Hinge Frost King H113FS/6 Fluted Carpet Bar National Hardware N211-391 Decorative Broad Hinge
National Hardware Narrow Hinge, Series: V1801, 0.23 in Hole Diameter, 0.05 in Leaf Thickness, 2-1/2 in Door Leaf Length, 2-1/2 in Frame Leaf Length, 0.1 in Diameter Pin, Wall Mounting, Fasteners: Screws, 6 lb Load Capacity, 1-9/16 in Overall Width, Solid Brass, For Bookcases and Kitchen Cabinets Joins carpet with other types of flooring at a lower height. Covers seams and spaces. National Hardware Broad Hinge, Decorative, Series: V1802, 6 Holes, 0.23 in Hole Diameter, 0.05 in Leaf Thickness, 2-1/2 in Door Leaf Length, 2-1/2 in Frame Leaf Length, 0.01 in Diameter Pin, Surface Mounting, Fasteners: Screws, 6 lb Load Capacity, 13/4 in Overall Width, Solid Brass, Solid Brass, For Small Chests, Jewelry Boxes and Craft Projects
National Hardware N211-409 Decorative Broad Hinge National Hardware N261-768 Decorative Ball Tip Hinge National Hardware N213-553 Decorative Ball Tip Hinge
National Hardware Broad Hinge, Decorative, Series: V1802, 6 Holes, 0.23 in Hole Diameter, 0.05 in Leaf Thickness, 2-1/2 in Door Leaf Length, 2-1/2 in Frame Leaf Length, 0.01 in Diameter Pin, Surface Mounting, Fasteners: Screws, 6 lb Load Capacity, 1-3/4 in Overall Width, Solid Brass, Antique Brass, For Small Chests, Jewelry Boxes and Craft Projects National Hardware Ball Tip Hinge, Decorative, Series: V1806, 6 Holes, 0.21 in Hole Diameter, 0.04 in Leaf Thickness, 2 in Door Leaf Length, 2 in Frame Leaf Length, 0.1 in Diameter Pin, Surface Mounting, Fasteners: Screws, 5 lb Load Capacity, 2-1/2 in Overall Length, 1-3/8 in Overall Width, Solid Brass, Solid Brass, For Small Chests National Hardware Ball Tip Hinge, Decorative, Series: V1806, 6 Holes, 0.21 in Hole Diameter, 0.04 in Leaf Thickness, 2 in Door Leaf Length, 2 in Frame Leaf Length, 0.1 in Diameter Pin, Surface Mounting, Fasteners: Screws, 5 lb Load Capacity, 2-1/2 in Overall Length, 1-3/8 in Overall Width, Solid Brass, Antique Brass, For Small Chests
M-D 72074 Wide Smooth Carpet Bar Knape & Vogt 1284PWH450 Drawer Slide National Hardware V1812 Decorative Hinge
Covers and protects carpet edges to provide a finished appearance. Includes screw nails to secure trim. Medium-duty slide designed for kitchen cabinet and bathroom vanity applications. Adaptable to frame mounting and 32mm mounting system. Solid stud and captive roller reduces side play. Positive stop, lift-out disconnect, stay-closed design. Adjustment slots on both the drawer member and the cabinet member ease installation. Screws fasten to either side or bottom of drawer. Positive lock-out feature is ideal for pull out work surfaces. Height: 1-9/32". Required Clearance: 1/2" plus 1/32" minus 0 each side. 1" between overall drawer side height and cabinet opening height required for drawer insertion and removal. Packaged with screws and installation instructions. Maximum drawer width 18". National Hardware Decorative Hinge, Series: V1812, 6 Holes, 0.22 in Hole Diameter, 0.06 in Leaf Thickness, 1-5/16 in Door Leaf Length, 1-5/16 in Frame Leaf Length, 0.15 in Diameter Pin, Surface Mounting, Fasteners: Screws, 2-7/8 in Overall Width, Solid Brass, Solid Brass, For Desks, Lids, Chests, Cabinets and Table Leaves
National Hardware V35 Corrosion Resistant Draw Hasp Frost King H113FB/6 Fluted Carpet Bar Knape & Vogt 1260P-16 Light Duty Drawer Slide
DRAW HASPS 4IN ZN PLT
Our Price: $8.03
National Hardware Draw Hasp, Corrosion Resistant, Series: V35, 4 in Length, Steel, Zinc Plated, Gray, Includes: Fasteners, For Doors, Cabinets, Boxes and Trunks Joins carpet with other types of flooring at a lower height. Covers seams and spaces. Light-Duty slide designed for general cabinet, desk and fixture application. Height: 3-1/8". Required Clearance: 1/2" plus 1/32" minus 0 each side. Features Positive stop. Stay-closed design. Depress stop lever for drawer removal. Dust shielded ball bearing rollers. Packaged with screws and installation instructions. Maximum drawer width 18".
M-D 78212 Extra Wide Fluted Carpet Trim Knape & Vogt 1284PALM500 Euro Roller Slide Knape & Vogt 1284PWH500 Drawer Slide
Extra wide carpet trim covers, protects and provides a finished edge. Includes screw nails to secure trim to carpet. Medium-duty slide designed for kitchen cabinet and bathroom vanity applications. Adaptable to frame mounting and 32mm mounting system. Solid stud and captive roller reduces side play. Positive stop, lift-out disconnect, stay-closed design. Adjustment slots on both the drawer member and the cabinet member ease installation. Screws fasten to either side or bottom of drawer. Positive lock-out feature is ideal for pull out work surfaces. Height: 1-9/32". Required Clearance: 1/2" plus 1/32" minus 0 each side. 1" between overall drawer side height and cabinet opening height required for drawer insertion and removal. Packaged with screws and installation instructions. Maximum drawer width 18". Medium-duty slide designed for kitchen cabinet and bathroom vanity applications. Adaptable to frame mounting and 32mm mounting system. Solid stud and captive roller reduces side play. Positive stop, lift-out disconnect, stay-closed design. Adjustment slots on both the drawer member and the cabinet member ease installation. Screws fasten to either side or bottom of drawer. Positive lock-out feature is ideal for pull out work surfaces. Height: 1-9/32". Required Clearance: 1/2" plus 1/32" minus 0 each side. 1" between overall drawer side height and cabinet opening height required for drawer insertion and removal. Packaged with screws and installation instructions. Maximum drawer width 18".
Knape & Vogt 1260P-18 Light Duty Drawer Slide National Hardware N135-335 Decorative Cabinet Hinge Knape & Vogt 1300P ZC 12 Drawer Slide
Light-Duty slide designed for general cabinet, desk and fixture application. Height: 3-1/8". Required Clearance: 1/2" plus 1/32" minus 0 each side. Features Positive stop. Stay-closed design. Depress stop lever for drawer removal. Dust shielded ball bearing rollers. Packaged with screws and installation instructions. Maximum drawer width 18". National Hardware Cabinet Hinge, Decorative, Series: V485, 6 Holes, 0.05 in Leaf Thickness, 1.66 in Door Leaf Length, 1-1/4 in Door Leaf Width, 1.66 in Frame Leaf Length, 1-1/4 in Frame Leaf Width, 1/8 in Diameter Pin, Surface Mounting, 8 lb Load Capacity, 2.81 in Overall Length, 2.81 in Overall Width, 0.05 in Overall Depth, Cold Rolled Steel Designed for medium duty applications where a lever release is desired. For kitchen cabinet, vanity, desk and store fixture applications. Height: 3".  Required Clearance: 1/2" plus 1/32" minus 0 each side. Features Positive stop lever that prevents accidental drawer removal.  Zinc-plated cold rolled steel. Ball bearing nylon rollers. Packaged with screws and installation instructions. Maximum drawer width 18".
Knape & Vogt 1284PALM550 Euro Roller Slide Knape & Vogt 1284PWH550 Drawer Slide National Hardware V629 Flush/Full Inset Cabinet Hinge
Medium-duty slide designed for kitchen cabinet and bathroom vanity applications. Adaptable to frame mounting and 32mm mounting system. Solid stud and captive roller reduces side play. Positive stop, lift-out disconnect, stay-closed design. Adjustment slots on both the drawer member and the cabinet member ease installation. Screws fasten to either side or bottom of drawer. Positive lock-out feature is ideal for pull out work surfaces. Height: 1-9/32". Required Clearance: 1/2" plus 1/32" minus 0 each side. 1" between overall drawer side height and cabinet opening height required for drawer insertion and removal. Packaged with screws and installation instructions. Maximum drawer width 18". Medium-duty slide designed for kitchen cabinet and bathroom vanity applications. Adaptable to frame mounting and 32mm mounting system. Solid stud and captive roller reduces side play. Positive stop, lift-out disconnect, stay-closed design. Adjustment slots on both the drawer member and the cabinet member ease installation. Screws fasten to either side or bottom of drawer. Positive lock-out feature is ideal for pull out work surfaces. Height: 1-9/32". Required Clearance: 1/2" plus 1/32" minus 0 each side. 1" between overall drawer side height and cabinet opening height required for drawer insertion and removal. Packaged with screws and installation instructions. Maximum drawer width 18". National Hardware Cabinet Hinge, Flush/Full Inset, Series: V629, 6 Holes, 0.23 in Hole Diameter, 0.06 in Leaf Thickness, 2-1/2 in Door Leaf Length, 2-1/2 in Frame Leaf Length, Removable Pin, 0.13 in Diameter Pin, 20 lb Load Capacity, 2-1/2 in Overall Width, Cold Rolled Steel, Brass, Includes: Mounting Screws, 170 deg Opening
Knape & Vogt 1300P ZC 14 Drawer Slide M-D 79244 Extra Wide Fluted Carpet Trim National Hardware V175 Chest Handle
Designed for medium duty applications where a lever release is desired. For kitchen cabinet, vanity, desk and store fixture applications. Height: 3".  Required Clearance: 1/2" plus 1/32" minus 0 each side. Features Positive stop lever that prevents accidental drawer removal.  Zinc-plated cold rolled steel. Ball bearing nylon rollers. Packaged with screws and installation instructions. Maximum drawer width 18". Extra wide carpet trim covers, protects and provides a finished edge. Includes screw nails to secure trim to carpet. National Hardware Chest Handle, Series: V175, Suitable For Use With: Small Chests and Boxes, 4 in, 180 lb Safe Working Load, Steel, Zinc Plated, 4.88 in Length X 0.58 in Width X 4.13 in Height, BHMA A138.18
Knape & Vogt 1260P-20 Light Duty Drawer Slide M-D 74187 Wide Fluted Carpet Bar Knape & Vogt 1300P ZC 18 Drawer Slide
Light-Duty slide designed for general cabinet, desk and fixture application. Height: 3-1/8". Required Clearance: 1/2" plus 1/32" minus 0 each side. Features Positive stop. Stay-closed design. Depress stop lever for drawer removal. Dust shielded ball bearing rollers. Packaged with screws and installation instructions. Maximum drawer width 18". Covers, protects and provides a finished edge. Includes screw nails to secure trim to carpet. Designed for medium duty applications where a lever release is desired. For kitchen cabinet, vanity, desk and store fixture applications. Height: 3".  Required Clearance: 1/2" plus 1/32" minus 0 each side. Features Positive stop lever that prevents accidental drawer removal.  Zinc-plated cold rolled steel. Ball bearing nylon rollers. Packaged with screws and installation instructions. Maximum drawer width 18".
Knape & Vogt 1300P ZC 16 Drawer Slide Knape & Vogt 1260P-22 Light Duty Drawer Slide M-D 43858 Extra Wide Fluted Carpet Trim
Designed for medium duty applications where a lever release is desired. For kitchen cabinet, vanity, desk and store fixture applications. Height: 3".  Required Clearance: 1/2" plus 1/32" minus 0 each side. Features Positive stop lever that prevents accidental drawer removal.  Zinc-plated cold rolled steel. Ball bearing nylon rollers. Packaged with screws and installation instructions. Maximum drawer width 18". Light-Duty slide designed for general cabinet, desk and fixture application. Height: 3-1/8". Required Clearance: 1/2" plus 1/32" minus 0 each side. Features Positive stop. Stay-closed design. Depress stop lever for drawer removal. Dust shielded ball bearing rollers. Packaged with screws and installation instructions. Maximum drawer width 18". Extra wide carpet trim covers, protects and provides a finished edge. Includes screw nails to secure trim to carpet.
National Hardware N135-194 Decorative Cabinet Hinge Knape & Vogt PBP10016 Precision Drawer Slide National Hardware V1805 Decorative Desk Hinge
CABINET HINGES 1IN BRS
Our Price: $9.22
National Hardware Cabinet Hinge, Decorative, Series: V475, 6 Holes, 0.05 in Leaf Thickness, 1-5/8 in Door Leaf Length, 1-1/2 in Door Leaf Width, 1-5/8 in Frame Leaf Length, 1-1/2 in Frame Leaf Width, Surface Mounting, 8 lb Load Capacity, 3 in Overall Width, Cold Rolled Steel, Brass, For Commercial/Industrial and Residential Applications Direct access mounting holes, precision ball bearings, telescopic action, non-handed design, and lever disconnect. Includes screws for installation. Height: 1-1/8". Clearance required: 1/2" plus 1/32" minus 0 each side. Maximum drawer width 24". National Hardware Desk Hinge, Decorative, Series: V1805, 6 Holes, 0.24 in Hole Diameter, 0.06 in Leaf Thickness, 2 in Door Leaf Length, 2 in Frame Leaf Length, 0.15 in Diameter Pin, Surface, Flush Mounting, Fasteners: Screws, 11 lb Load Capacity, 3-1/16 in Overall Width, Solid Brass, For Desks, Lids, Chests, Cabinets and Table Leaves
Knape & Vogt 1300P ZC 20 Drawer Slide Frost King H591FS/6 Fluted Carpet Bar National Hardware V35 Corrosion Resistant Draw Hasp
DRAW HASPS 4IN BLK
Our Price: $9.68
Designed for medium duty applications where a lever release is desired. For kitchen cabinet, vanity, desk and store fixture applications. Height: 3".  Required Clearance: 1/2" plus 1/32" minus 0 each side. Features Positive stop lever that prevents accidental drawer removal.  Zinc-plated cold rolled steel. Ball bearing nylon rollers. Packaged with screws and installation instructions. Maximum drawer width 18". Joins carpet with other types of flooring at a lower height. Covers seams and spaces. National Hardware Draw Hasp, Corrosion Resistant, Series: V35, 4 in Length, Steel, Black, Includes: Fasteners, For Doors, Cabinets, Boxes and Trunks
Knape & Vogt 1300P ZC 22 Drawer Slide National Hardware V1844 Lockable Draw Catch Knape & Vogt PBP10018 Precision Drawer Slide
DRAW CATCHES ZN PLT
Our Price: $9.98
Designed for medium duty applications where a lever release is desired. For kitchen cabinet, vanity, desk and store fixture applications. Height: 3".  Required Clearance: 1/2" plus 1/32" minus 0 each side. Features Positive stop lever that prevents accidental drawer removal.  Zinc-plated cold rolled steel. Ball bearing nylon rollers. Packaged with screws and installation instructions. Maximum drawer width 18". National Hardware Draw Catch, Lockable, Series: V1844, 0.3 in Bore, Surface Mounting, 0.13 in Mounting Hole, 0.78 in, Suitable For Use With: Padlocks, 0.12 in Wire Diameter, 1.04 in Overall Width, 3.38 in Overall Height, Steel, Zinc Plated Direct access mounting holes, precision ball bearings, telescopic action, non-handed design, and lever disconnect. Includes screws for installation. Height: 1-1/8". Clearance required: 1/2" plus 1/32" minus 0 each side. Maximum drawer width 24".
Frost King H591P/6 Carpet Bar M-D 85290 Carpet Trim M-D 78139 Fluted Carpet Gripper with Teeth
Joins carpet with other types of flooring at a lower height. Covers seams and spaces. Covers and protects carpet edges to provide a finished appearance. Includes screws to secure trim. 5/16"H. Fluted carpet gripper with teeth. Secures stretch-in carpet and protects carpet edge. Includes screw nails to secure trim. 1/2"H.
Frost King H591FB/6 Fluted Carpet Bar M-D 78154 Wide Fluted Carpet Trim Knape & Vogt 1300P ZC 24 Drawer Slide
Joins carpet with other types of flooring at a lower height. Covers seams and spaces. Covers, protects and provides a finished edge. Includes screw nails to secure trim to carpet. Designed for medium duty applications where a lever release is desired. For kitchen cabinet, vanity, desk and store fixture applications. Height: 3".  Required Clearance: 1/2" plus 1/32" minus 0 each side. Features Positive stop lever that prevents accidental drawer removal.  Zinc-plated cold rolled steel. Ball bearing nylon rollers. Packaged with screws and installation instructions. Maximum drawer width 18".
M-D 79087 Fluted Carpet Trim M-D 78089 Fluted Carpet Trim M-D 40124 Wide Carpet Trim
Covers, protects and provides a finished edge. Includes screw nails to secure trim to carpet. Covers, protects and provides a finished edge. Includes screw nails to secure trim to carpet. Covers, protects and provides a finished edge. Includes screw nails to secure trim to carpet.
M-D 40120 Wide Carpet Trim Knape & Vogt PBP10020 Precision Drawer Slide M-D 01040 Door Jamb Weatherstrip
Covers, protects and provides a finished edge. Includes screw nails to secure trim to carpet. Direct access mounting holes, precision ball bearings, telescopic action, non-handed design, and lever disconnect. Includes screws for installation. Height: 1-1/8". Clearance required: 1/2" plus 1/32" minus 0 each side. Maximum drawer width 24". Made of aluminum and vinyl. Nail fasteners for wood frame doors, screw fasteners for wood or steel frame doors. Fasteners included. Install on doorstop. Slotted fastener holes provide easy installation and adjustment. Includes 3 pieces.
M-D 79152 Wide Fluted Carpet Trim DRAW HASP ZINC PLATED 5IN     M-D 66084 Extra Wide Smooth Carpet Bar
DRAW HASPS 5IN ZN PLT
Our Price: $11.38
Covers, protects and provides a finished edge. Includes screw nails to secure trim to carpet. Stanley Draw Hasp, Series: V35, 5 in Length, Steel, Zinc-Plated Covers and protects carpet edges to provide a finished appearance. Includes screw nails to secure trim.
M-D 79137 Fluted Carpet Gripper Frost King H591HG/6 Carpet Bar Frost King VA17H Adjustable Screw-On Door Sweep Set
Fluted carpet gripper with teeth. Secures stretch-in carpet and protects carpet edge. Includes screw nails to secure trim. 1/2"H. Joins carpet with other types of flooring at a lower height. Covers seams and spaces. Durable extruded aluminum with a tubular vinyl strip. Nail-on or screw-on door set for 7' x 36" doors. 3/4" width.
M-D Platinum 91890 Replacement Door Jamb Weatherstrip M-D Platinum 91891 Replacement Door Jamb Weatherstrip DOOR WEATHER REPLC 84IN BEIGE
Replacement weather strip. Made from non-toxic recyclable material. Installs easily into slotted door jambs. Superior seal provides year round comfort. Replacement weather strip. Made from non-toxic recyclable material. Installs easily into slotted door jambs. Superior seal provides year round comfort. Replacement weather strip. Made from non-toxic recyclable material. Installs easily into slotted door jambs. Superior seal provides year round comfort.
National Hardware V36 Weather Resistant Draw Hasp M-D 01073 Top and Side Door Jamb Weatherstrip Kit M-D 43856 Wide Fluted Carpet Trim
DRAW HASPS 2-3/4IN SS
Our Price: $11.79
National Hardware Draw Hasp, Weather Resistant, Series: V36, 2-3/4 in Length, Stainless Steel, Zinc Plated, Includes: Fasteners, BHMA A138.18 Certified, For Doors, Cabinets, Boxes and Trunks Made of aluminum and vinyl. Nail fasteners for wood frame doors, screw fasteners for wood or steel frame doors. Fasteners included. Install on doorstop. Slotted fastener holes provide easy installation and adjustment. Includes 3 pieces. Covers, protects and provides a finished edge. Includes screw nails to secure trim to carpet.
M-D 66472 Wide Smooth Carpet Trim M-D 85357 Wide Carpet Trim M-D 43886 Fluted Carpet Gripper with Teeth
Covers and protects carpet edges to provide a finished appearance. Includes screw nails to secure trim. Oak trim covers and protects carpet edges to provide a finished appearance. Includes screws to secure trim. 7/16"H. Fluted carpet gripper with teeth. Secures stretch-in carpet and protects carpet edge. Includes screw nails to secure trim. 1/2"H.
Frost King H1591FB6 Fluted Carpet Bar Knape & Vogt PBP10022 Precision Drawer Slide Shepherd 9549 Round Lazy Susan Turntable
Joins carpet with other types of flooring at a lower height. Covers seams and spaces. Direct access mounting holes, precision ball bearings, telescopic action, non-handed design, and lever disconnect. Includes screws for installation. Height: 1-1/8". Clearance required: 1/2" plus 1/32" minus 0 each side. Maximum drawer width 24". Ball-bearing for rotating book racks, business machine stands, serving trays, kitchen storage racks, etc.
M-D 85373 Wide Oak Molding Frost King VA17WH Adjustable Screw-On Door Sweep Set M-D 78220 Extra Wide Fluted Carpet Trim
Oak trim covers and protects carpet edges to provide a finished appearance. Includes screws to secure trim. 7/16"H. Durable extruded aluminum with a tubula