Home > HARDWARE > GENERAL HARDWARE > CABINET & DRAWER HARDWARE > DRAWER SLIDES
Sort By:
1
Amerock Allison 890ABS Round Cabinet Knob Amerock Allison BP3403CB Round Cabinet Knob Amerock Allison BP34133 Round Modern Cabinet Knob
Pull with 1-1/2" diameter x 3/4" height. Use with one #8-32 x 1" type screw. Knob with 1-1/4" diameter x 3/4" height. Use with one #8-32 x 1" type screw. Use with one #8-32 x 1" type screw. Includes two different screw lengths for your convenience.
Amerock Allison 848LB Round Cabinet Knob Amerock Allison BP341326 Round Modern Cabinet Knob Amerock Allison BP3423BB Round Traditional Cabinet Knob
Pull with 1-3/8" diameter x 1-1/8" height. Use with one #8-32 x 1" type screw. Use with one #8-32 x 1" type screw. Includes two different screw lengths for your convenience. Knob with 1-1/4" diameter x 1" height. Use with one #8-32 x 1" type screw.
Amerock Allison BP3467AE Round Country Manor Cabinet Knob Amerock Allison BP3443BB Round Harmony Cabinet Knob Amerock Allison 14403SCH Round Hollow Cabinet Knob
Knob with 1-1/16" diameter x 1" height. Use with one #8-32 x 1" type screw. Knob with 1-1/4" (32mm) diameter x 15/16" height. Use with one #8-32 x 1" type screw. Knob with 1-5/16" diameter x 7/8" height. Use with one #8-32 x 1" type screw.
Amerock Allison BP53005G10 Round Cabinet Knob Prime Line R 7133 Drawer Track Backplate Amerock Allison 244WPB Round Cabinet Knob
Knob with 1-1/4" diameter x 1-1/8" height. Use with one #8-32 x 1" type screw. Can be inverted for self-adjusting application, used on rolled edge and other center mounted tracks. 1-1/4" diameter. Use with one #8-32 x 1" type screw.
Amerock Allison 255PB Round Plain Cabinet Knob Amerock Allison BP53005ORB Round Cabinet Knob Prime Line R 7085 Drawer Track Guide Kit
Knob with 1-1/4" diameter x 7/8" height. Use with one #8-32 x 1" type screw. Knob with 1-1/4" diameter x 1-1/8" height. Use with one #8-32 x 1" type screw. Polyethylene guide and white polyethylene side saddles, restores smooth operation to track mounted drawers. Fits a 9/32" x 1-1/8" track.
Prime Line R 7152 Drawer Track Guide Kit Prime Line R 7154 Drawer Track Guide Kit Prime Line R 7145 Drawer Track Backplate
Polyethylene guide and white polyethylene side saddles, restores smooth operation to track mounted drawers. Fits a 9/32" x 1-1/8" track. Yellow polyethylene guide and white polyethylene side saddles, restores smooth operation to track mounted drawers. Fits a 3/32" x 1-9/32" track. Contents: 2 guides, 4 side saddles, and 2 sets of installation fasteners. Used to hold track to back of cabinet; fits most popular side mount rails. Contents: 2 backplates; 2 sets of installation screws.
Prime Line R 7084 Drawer Track Guide Kit Prime Line R 7082 Drawer Track Guide Kit Prime Line R 7130 Drawer Track Guide Kit
Brown polyethylene guide and white polyethylene side saddles, restores smooth operation to track mounted drawers. Fits a 1/4" x 7/8" track. Contents: 2 guides, 4 side saddles, and 2 sets of installation fasteners. Red polyethylene guide and white polyethylene side saddles, restores smooth operation to track mounted drawers. Fits a 9/32" x 3/4" track. Contents: 2 guides, 4 side saddles, and 2 sets of installation fasteners. Purple polyethylene guide and white side saddles. Guides used for aligning drawer and making for a smoother operation. Fits a 3/32" x 1-3/16" track. Contents: 2 guides, 4 side saddles, and 2 sets of installation fasteners. Designed for use with metal rolled-edge tracks.
Prime Line R 7131 Drawer Track Back Socket Schlage C9110B3 Decorative Hasp KNOB 1-3/16IN WHITE/POL CHROME
Mounts horizontally or vertically. Used on Amerock Tri-roller drawer slide track. (Track fits snug). 5/8" x 1-7/8". With screws. 1-1/4" diameter. Use with one #8-32 x 1" type screw.
Amerock Allison BP53011G10 Ring Cabinet Knob Amerock Allison BP594AE Round Colonnade Cabinet Knob Amerock Allison BP53471G10 Round Scroll Cabinet Knob
Knob with 1-1/4? (32mm) L x 1-3/16? (30mm) H. Screw Size(s): #8-32 x 1?L machine screw. Knob with 1-1/2? (38mm) L x 7/8? (22mm) H. Use with one #8-32 x 1" type screw. Knob with 1-1/4" diameter x 1-1/8" height. Use with one #8-32 x 1" type screw.
Knape & Vogt 1284-4WP Rear Mouth Socket Rear Mounting Bracket Prime Line R 7147 Flat Stepped Drawer Guide Roller Assembly Schlage C907 Decorative Cabinet Hinge
Optional bracket for use with draw slide No.1284. Rollers mount at the front of the drawer opening, and help center the drawer. This allows for smoother operation. Flat stepped roller edge type, mixed materials. Includes 1 left hand roller, 1 right hand roller, and 1 set of installation fasteners. Schlage Cabinet Hinge, Decorative, Series: C907, 6 Holes, 1-5/16 in Door Leaf Length, 2-1/4 in Door Leaf Width, Steel, Yellow, Bright Brass, Used in Fine Woodworking Projects
KNOB 1-3/8IN ALLISON SATNICKEL HINGE STN NKL 3/4X5/8IN       HINGE ORB 3/4X5/8IN
HINGES 3/4X5/8IN ORB
Our Price: $3.03
Oversized, 1-3/8" diameter knob. Use with one #8-32 x 1'' type screw. National Hardware Hinge, Series: N211, 1/8 in Hole Diameter, 1/32 in Leaf Thickness, 3/4 in Door Leaf Length, 3/4 in Frame Leaf Length, Surface Mounting, 3/4 in Overall Length, 5/8 in Overall Width, Steel, Satin Nickel, Includes: Fasteners Designed for small chests, jewelry boxes, craft projects, etc. Decorative design. Surface mount for easy installation. Fasteners included. Visual-pack.
Prime Line R 7148 Convex Drawer Track Roller Amerock Allison BP53471ORB Round Scroll Cabinet Knob Amerock Allison 573ABS Bail Pull
Steel bracket, convex plastic roller mounts on rear of drawer. Used as center roller for monorail drawer slide systems. Contains: 2 roller assemblies, 2 sets of installation screws. Knob with 1-1/4" diameter x 1-1/8" height. Use with one #8-32 x 1" type screw. Pull with 3" centers, 3-13/16"L  x  2-3/4"W.
Amerock Allison BP55220G10 Small Oblong Cabinet Knob HINGE ORB 1X1IN               HINGE STN NKL 1X1IN
HINGES 1X1IN ORB
Our Price: $3.33
HINGES 1X1IN STN NCKL
Our Price: $3.33
Knob with 1.125" diameter x 2.625" length  x  0.75" width. Use one #8 - 32 x 1" type screw. Designed for small chests, jewelry boxes, craft projects, etc. Decorative design. Surface mount for easy installation. Fasteners included. Visual-pack. National Hardware Broad Hinge, Series: V1802, 4 Holes, 1/8 in Hole Diameter, 0.8 mm Leaf Thickness, Surface Mounting, 1 in Overall Length, 1 in Overall Width, Steel, Satin Nickel Plated, Includes: Fasteners, For Small Chests, Jewelry Boxes and Craft Projects
Amerock Allison 14404SCH Round Plain Cabinet Knob National Hardware V1813 Decorative Hinge Prime Line R 7141 Drawer Track Roller
Transitional style knob with 1-3/16" diameter x 1-1/18" height. Use with one #8-32 x 1" type screw. National Hardware Decorative Hinge, Series: V1813, 4 Holes, 0.08 in Hole Diameter, 0.02 in Leaf Thickness, 1-1/8 in Door Leaf Length, 1-1/8 in Frame Leaf Length, 0.08 in Diameter Pin, Surface Mounting, Fasteners: Screws, 1-1/8 in Overall Width, Solid Brass, Antique Brass, For Small Chests, Jewelry Boxes and Craft Projects Steel bracket, convex plastic roller mounts on rear of drawer. Used as center roller for monorail drawer slide systems. Contains: 2 roller assemblies, 2 sets of installation screws.
National Hardware N211-201 Decorative Narrow Hinge HINGE ANT BRASS 5/8X1IN       National Hardware V1816 Decorative Hinge
HINGES 5/8X1IN ANT BRS
Our Price: $3.50
HINGES 5/8X1IN SLD BRS
Our Price: $3.50
National Hardware Narrow Hinge, Decorative, Series: V1800, 4 Holes, 0.14 in Hole Diameter, 0.02 in Leaf Thickness, 3/4 in Door Leaf Length, 3/4 in Frame Leaf Length, 0.08 in Diameter Pin, Surface Mounting, Fasteners: Screws, 2 lb Load Capacity, 5/8 in Overall Width, Solid Brass, Antique Brass, For Small Chests, Jewelry Boxes and Craft Projects National Hardware Decorative Hinge, Series: V1816, 4 Holes, 0.08 in Hole Diameter, 0.02 in Leaf Thickness, 0.08 in Dia Pin, 5/8 in Overall Length, 1 in Overall Width, Solid Brass, Antique Brass National Hardware Decorative Hinge, Series: V1816, 4 Holes, 0.08 in Hole Diameter, 0.02 in Leaf Thickness, 5/8 in Door Leaf Length, 5/8 in Frame Leaf Length, 0.08 in Diameter Pin, Fasteners: Screws, 1 in Overall Width, Solid Brass, Solid Brass
Schlage C907 Decorative Cabinet Hinge KNOB BRASS 1/2IN              Schlage C9340F3 Chest Handle
KNOBS 1/2IN BRS
Our Price: $3.58
Schlage Cabinet Hinge, Decorative, Series: C907, 6 Holes, 1-5/16 in Door Leaf Length, 2-1/4 in Door Leaf Width, Solid Brass, Yellow, Bright Brass, Used in Fine Woodworking Projects Visual-pack. 1-3/8" x 3-1/2". With screws.
National Hardware N211-185 Decorative Narrow Hinge BRACKET RR MT F/MDL 84-8450 ZN Prime Line R 7132 Drawer Track Back Roller with Plastic Roller
HINGES 1X3/4IN ANT BRS
Our Price: $3.60
National Hardware Narrow Hinge, Decorative, Series: V1800, 4 Holes, 0.14 in Hole Diameter, 0.02 in Leaf Thickness, 1 in Door Leaf Length, 1 in Frame Leaf Length, 0.08 in Diameter Pin, Surface Mounting, Fasteners: Screws, 2 lb Load Capacity, 3/4 in Overall Width, Solid Brass, Antique Brass, For Small Chests, Jewelry Boxes and Craft Projects Optional rear mounting socket for face frame application simplifies installation. Non handed. Hardware included.  3-1/2" L x 0.50"W. Zinc finish. Steel bracket, convex plastic roller mounts on rear of drawer. Used as center roller for monorail drawer slide systems. Contents: 2 roller assemblies, 2 sets of installation screws.
National Hardware V1811 Decorative Hinge National Hardware N211-193 Decorative Narrow Hinge National Hardware N211-417 Decorative Hinge
National Hardware Decorative Hinge, Series: V1811, 5 Holes, 0.08 in Hole Diameter, 0.02 in Leaf Thickness, 5/8 in Door Leaf Length, 5/8 in Frame Leaf Length, 0.08 in Diameter Pin, Surface Mounting, Fasteners: Screws, 1-7/8 in Overall Width, Solid Brass, Solid Brass, For Small Chests, Jewelry Boxes and Craft Projects National Hardware Narrow Hinge, Decorative, Series: V1800, 4 Holes, 0.14 in Hole Diameter, 0.02 in Leaf Thickness, 3/4 in Door Leaf Length, 3/4 in Frame Leaf Length, 0.08 in Diameter Pin, Surface Mounting, Fasteners: Screws, 2 lb Load Capacity, 5/8 in Overall Width, Solid Brass, Solid Brass, For Small Chests, Jewelry Boxes and Craft Projects National Hardware Decorative Hinge, Series: V1810, 6 Holes, 0.08 in Hole Diameter, 0.02 in Leaf Thickness, 5/8 in Door Leaf Length, 5/8 in Frame Leaf Length, 0.08 in Diameter Pin, Fasteners: Screws, 2-3/4 in Overall Width, Solid Brass, Solid Brass
National Hardware N211-425 Decorative Hinge Amerock Inspirations BP1586G10 3-Ring Round Cabinet Knob Amerock Inspirations BP1581WID Round Leaf Cabinet Knob
National Hardware Decorative Hinge, Series: V1810, 6 Holes, 0.08 in Hole Diameter, 0.02 in Leaf Thickness, 5/8 in Door Leaf Length, 5/8 in Frame Leaf Length, 0.08 in Diameter Pin, Fasteners: Screws, 2-3/4 in Overall Width, Solid Brass, Antique Brass Use with one #8-32 x 1" type screw. Protected by Guardian Lifetime finish. Use with one #8-32 x 1" type screw. Protected by Guardian Lifetime finish.
Amerock Anniversary BP853G9 Round Cabinet Knob HINGE ORB 1-1/2X1-1/4IN       HINGE STN NKL 1-1/2X1-1/4IN
Metal knob with 1.375" diameter x 1.062" height. Use with one #8-32 x 1" type screw. Designed for small chests, jewelry boxes, craft projects, etc. Decorative design. Surface mount for easy installation. Fasteners included. Visual-pack. National Hardware Broad Hinge, Series: V1802, 4 Holes, 11/64 in Hole Diameter, 0.8 mm Leaf Thickness, Surface Mounting, 1-1/2 in Overall Length, 1-1/4 in Overall Width, Steel, Satin Nickel Plated, Includes: Fasteners, For Small Chests, Jewelry Boxes and Craft Projects
BRACKET RR MT F/MDL TT100 ZINC KNOB BRASS 5/8IN              KNOB 1-1/4IN ELEGANT BRASS
KNOBS 5/8IN BRS
Our Price: $3.91
Optional rear mounting socket for face frame application simplifies installation. Non handed. Hardware included.  3-1/2" L x 0.50"W. Zinc finish. Visual-pack. Use with one #8-32 x 1" type screw. Protected by Guardian Lifetime finish.
Amerock Anniversary BP85326 Round Cabinet Knob HINGE ORB 2X1-3/8IN           HINGE STN NKL 2X1-3/8IN
HINGES 2X1-3/8IN ORB
Our Price: $3.98
Metal knob with 1.375" diameter x 1.062" height. Use with one #8-32 x 1" type screw. Designed for small chests, jewelry boxes, craft projects, etc. Decorative design. Surface mount for easy installation. Fasteners included. Visual-pack. National Hardware Broad Hinge, Series: V1802, 6 Holes, 5/32 in Hole Diameter, 1.2 mm Leaf Thickness, Surface Mounting, 2 in Overall Length, 1-3/8 in Overall Width, Steel, Satin Nickel Plated, Includes: Fasteners, For Small Chests, Jewelry Boxes and Craft Projects
Amerock Inspirations BP1586WID 3-Ring Round Cabinet Knob Amerock Inspirations BP1581R2 Round Leaf Cabinet Knob Amerock Inspirations BP1585G10 Round Rope Cabinet Knob
Use with one #8-32 x 1" type screw. Protected by Guardian Lifetime finish. Use with one #8-32 x 1" type screw. Protected by Guardian Lifetime finish. Knob with 1-1/4? (32mm) L x 1-1/16? (27mm) H. Screw Size(s): #8-32 x 1?L machine screw.
Amerock Inspirations BP1585FB Round Rope Cabinet Knob National Hardware N211-342 Decorative Broad Hinge National Hardware V1801 Narrow Hinge
HINGES 1X1IN ANT BRS
Our Price: $4.01
Knob with 1-1/4? (32mm) L x 1-1/16? (27mm) H. Screw Size(s): #8-32 x 1?L machine screw. National Hardware Broad Hinge, Decorative, Series: V1802, 4 Holes, 0.14 in Hole Diameter, 0.02 in Leaf Thickness, 1 in Door Leaf Length, 1 in Frame Leaf Length, 0.08 in Diameter Pin, Surface Mounting, Fasteners: Screws, 2 lb Load Capacity, 1 in Overall Width, Solid Brass, Antique Brass, For Small Chests, Jewelry Boxes and Craft Projects National Hardware Narrow Hinge, Series: V1801, 0.14 in Hole Diameter, 0.02 in Leaf Thickness, 3/4 in Door Leaf Length, 3/4 in Frame Leaf Length, 0.08 in Diameter Pin, Wall Mounting, Fasteners: Screws, 2 lb Load Capacity, 11/16 in Overall Width, Solid Brass, For Bookcases and Kitchen Cabinets
Mintcraft SF671-31PB Round Cabinet Knob Amerock Revitalize BP55342G10 Round Cabinet Knob KNOB DECO ANT BRASS 3/4IN
Easy to match any decor. 1-1/4" length x 55/64" width x 7/32" height. Includes screws. Knob with 1-1/4? (32mm) L x 1-1/4? (32mm) H. Screw Size(s): #8-32 x 1?L machine screw. Visual-pack.
KNOB DECO BRASS 3/4IN         Amerock Revitalize BP55342ORB Round Cabinet Knob KNOB 1-1/4 INCH SATIN NICKEL
Visual-pack. Knob with 1-1/4? (32mm) L x 1-1/4? (32mm) H. Screw Size(s): #8-32 x 1?L machine screw. Traditional style, 1-1/4? diameter x 1? width.
Amerock Inspirations BP1586ORB 3-Ring Round Cabinet Knob National Hardware N211-177 Decorative Narrow Hinge KNOB RND BURNSHD BRASS 1-1/4IN
HINGES 1X3/4IN SLD BRS
Our Price: $4.26
Use with one #8-32 x 1" type screw. Protected by Guardian Lifetime finish. National Hardware Narrow Hinge, Decorative, Series: V1800, 4 Holes, 0.14 in Hole Diameter, 0.02 in Leaf Thickness, 1 in Door Leaf Length, 1 in Frame Leaf Length, 0.08 in Diameter Pin, Surface Mounting, Fasteners: Screws, 2 lb Load Capacity, 3/4 in Overall Width, Solid Brass, Solid Brass, For Small Chests, Jewelry Boxes and Craft Projects Knob with 1-1/4" diameter x 1-1/8" height. Use with one #8-32 x 1" type screw.
BRACKET REAR MNT F/MDL 1805 ZN National Hardware N211-219 Decorative Narrow Hinge National Hardware N211-227 Decorative Narrow Hinge
Pair of rear brackets (left and right) for the 1805 epoxy-coated drawer slide features a 2-3/8" socket. National Hardware Narrow Hinge, Decorative, Series: V1800, 4 Holes, 0.16 in Hole Diameter, 0.04 in Leaf Thickness, 1-1/2 in Door Leaf Length, 1-1/2 in Frame Leaf Length, 0.1 in Diameter Pin, Surface Mounting, Fasteners: Screws, 5 lb Load Capacity, 7/8 in Overall Width, Solid Brass, Solid Brass, For Small Chests, Jewelry Boxes and Craft Projects National Hardware Narrow Hinge, Decorative, Series: V1800, 4 Holes, 0.16 in Hole Diameter, 0.04 in Leaf Thickness, 1-1/2 in Door Leaf Length, 1-1/2 in Frame Leaf Length, 0.1 in Diameter Pin, Surface Mounting, Fasteners: Screws, 5 lb Load Capacity, 7/8 in Overall Width, Solid Brass, Antique Brass, For Small Chests, Jewelry Boxes and Craft Projects
National Hardware N211-821 Decorative Hinge National Hardware N211-839 Decorative Hinge National Hardware V1802 Decorative Broad Hinge
HINGES 3/4X1IN SLD BRS
Our Price: $4.56
National Hardware Decorative Hinge, Series: V1814, 6 Holes, 0.21 in Hole Diameter, 0.04 in Leaf Thickness, 1.36 in Door Leaf Length, 1.36 in Frame Leaf Length, 0.1 in Diameter Pin, Fasteners: Screws, 2-1/4 in Overall Width, Solid Brass, Solid Brass National Hardware Decorative Hinge, Series: V1814, 6 Holes, 0.21 in Hole Diameter, 0.04 in Leaf Thickness, 1.36 in Door Leaf Length, 1.36 in Frame Leaf Length, 0.1 in Diameter Pin, Fasteners: Screws, 2-1/4 in Overall Width, Solid Brass, Antique Brass National Hardware Broad Hinge, Decorative, Series: V1802, 4 Holes, 0.14 in Hole Diameter, 0.02 in Leaf Thickness, 3/4 in Door Leaf Length, 3/4 in Frame Leaf Length, 0.08 in Diameter Pin, Surface Mounting, Fasteners: Screws, 2 lb Load Capacity, 1 in Overall Width, Solid Brass, Solid Brass, For Small Chests, Jewelry Boxes and Craft Projects
Prime Line R 7240 Right Hand/Left Hand Drawer Track Back Plate Amerock Revitalize BP55342GB Round Cabinet Knob Amerock Allison BP1950H26D Round Cabinet Knob
White nylon; 2-3/4"socket depth allows 2"of front to back adjustment of the rail; used on side mounted drawer track systems. Raw finish. Contents: 1 left hand bracket; 1 right hand bracket; 2 sets of installation screws. NOTE: Right side has a larger lip. Knob with 1-1/4? (32mm) L x 1-1/4? (32mm) H. Screw Size(s): #8-32 x 1?L machine screw. Knob with 1-1/4" diameter x 1" height. Use with one #8-32 x 1" type screw.
National Hardware V1801 Narrow Hinge National Hardware V1801 Narrow Hinge Amerock Allison BP778AE Round Carriage House Cabinet Knob
National Hardware Narrow Hinge, Series: V1801, 0.16 in Hole Diameter, 0.04 in Leaf Thickness, 1-1/2 in Door Leaf Length, 1-1/2 in Frame Leaf Length, 0.1 in Diameter Pin, Wall Mounting, Fasteners: Screws, 5 lb Load Capacity, 1 in Overall Width, Solid Brass, For Bookcases and Kitchen Cabinets National Hardware Narrow Hinge, Series: V1801, 0.14 in Hole Diameter, 0.02 in Leaf Thickness, 1 in Door Leaf Length, 1 in Frame Leaf Length, 0.08 in Diameter Pin, Wall Mounting, Fasteners: Screws, 2 lb Load Capacity, 13/16 in Overall Width, Solid Brass, For Bookcases and Kitchen Cabinets Knob with 1-1/4" diameter x 1" height. Back plate with 2'' diameter x 1/4" thickness. Use with one #8-32 x 1" type screw.
Amerock Reflections BP1387G10 Round Cabinet Knob KNOB 34MM WESTERLY GRAPHITE   National Hardware N211-334 Decorative Broad Hinge
HINGES 1X1IN SLD BRS
Our Price: $4.85
Knob with 1-1/4" diameter x 1-1/16" height. Use with one #8-32 x 1" type screw. Protected by Guardian Lifetime finish. Transitional style, 5-1/16? length, 1-1/16? projection. National Hardware Broad Hinge, Decorative, Series: V1802, 4 Holes, 0.14 in Hole Diameter, 0.02 in Leaf Thickness, 1 in Door Leaf Length, 1 in Frame Leaf Length, 0.08 in Diameter Pin, Surface Mounting, Fasteners: Screws, 2 lb Load Capacity, 1 in Overall Width, Solid Brass, Solid Brass, For Small Chests, Jewelry Boxes and Craft Projects
National Hardware V1818 Decorative Hinge Amerock Swirl'Z BP9338G10 Ball Eclectic Spiral Cabinet Knob National Hardware V1864 Chest Handle
National Hardware Decorative Hinge, Series: V1818, 6 Holes, 0.16 in Hole Diameter, 0.04 in Leaf Thickness, 3/4 in Door Leaf Length, 3/4 in Frame Leaf Length, 0.1 in Diameter Pin, Fasteners: Screws, 1-13/16 in Overall Width, Solid Brass, Solid Brass Use with one #8-32 x 1" type screw. Protected by Guardian Lifetime finish. National Hardware Chest Handle, Series: V1864, 3-1/2 in, Steel, Brass, 3.42 in Length X 2.34 in Width, Includes: (4) Screws
Amerock BP2355AE Furniture Trim Butt Hinge Amerock Allison BP771WI Round Legacy Cabinet Knob National Hardware N211-359 Decorative Broad Hinge
Polybagged. Use with one #8-32 x 1" type screw. Protected by Guardian Lifetime finish. 1-1/4"D x 1-1/16"H. National Hardware Broad Hinge, Decorative, Series: V1802, 4 Holes, 0.16 in Hole Diameter, 0.04 in Leaf Thickness, 1-1/2 in Door Leaf Length, 1-1/2 in Frame Leaf Length, 0.04 in Diameter Pin, Surface Mounting, Fasteners: Screws, 5 lb Load Capacity, 1-1/4 in Overall Width, Solid Brass, Solid Brass, For Small Chests, Jewelry Boxes and Craft Projects
National Hardware N211-367 Decorative Broad Hinge Prime-Line R 7321 Drawer Track Guide and Glide Schlage C907 Decorative Cabinet Hinge
National Hardware Broad Hinge, Decorative, Series: V1802, 4 Holes, 0.16 in Hole Diameter, 0.04 in Leaf Thickness, 1-1/2 in Door Leaf Length, 1-1/2 in Frame Leaf Length, 0.04 in Diameter Pin, Surface Mounting, Fasteners: Screws, 5 lb Load Capacity, 1-1/4 in Overall Width, Solid Brass, Antique Brass, For Small Chests, Jewelry Boxes and Craft Projects Used on furniture drawer systems; for dressers, hutches and night stand drawers. Opening for metal track on larger piece measures 15/16" x 3/32". Kit includes 2 dark-brown, plastic track case guides and 2 track guides, 4 white, plastic corner glides, 8 ring shank nails for nailing in corner glides (3/4" x 14-1/2 ga.), and 8 Phillips drive, pan head screws for installation of guides (#6 x 5/8"). Schlage Cabinet Hinge, Decorative, Series: C907, 6 Holes, 1-3/4 in Door Leaf Length, 3 in Door Leaf Width, Solid Brass, Antique Brass
Amerock Inspirations BP1585ORB Round Rope Cabinet Knob Amerock Mulholland BP53029ORB Square Traditional Cabinet Knob Amerock Manor BP26127G10 Oval Cabinet Knob
Knob with 1-1/4? (32mm) L x 1-1/16? (27mm) H. Screw Size(s): #8-32 x 1?L machine screw. Knob with 1-1/4" length x 13/16" width x 1-1/8" height. Use with one #8-32 x 1" type screw. Use with one #8-32 x 1" type screw.
Amerock Manor Egg BP26127ORB Cabinet Knob M-D 78030 Fluted Floor Tile Edge Amerock Allison BP1950HG10 Round Hollow Cabinet Knob
Use with one #8-32 x 1" type screw. Tile edging covers seams and joints in vinyl tile floor coverings. Includes screw nails to secure edging. Knob with 1-1/4" diameter x 1" height. Use with one #8-32 x 1" type screw.
KNOB 1-1/4IN OILRUB BRONZE    Amerock Mulholland BP53029G10 Round Traditional Cabinet Knob Prime Line R 7125 Undermount Drawer Track Kit
Knob with 1.286" diameter x 1.222" height. Use one #8 - 32 x 1" type screw. Knob with 1-1/4" length x 13/16" width x 1-1/8" height. Use with one #8-32 x 1" type screw. Rolled edge galvanized steel track with polyethylene guides and nylon front rollers. Track may be cut down for shorter drawer and can be used for top or bottom mount installations. Contents: 1 track; 1 front plate; 1 back plate; 1 drawer guide; 2 front rollers; 1 set of installation fasteners.
National Hardware N211-235 Decorative Narrow Hinge National Hardware N211-243 Decorative Narrow Hinge National Hardware N203-760 Chest Handle
HINGES 2X1IN SLD BRS
Our Price: $5.24
HINGES 2X1IN ANT BRS
Our Price: $5.24
National Hardware Narrow Hinge, Decorative, Series: V1800, 6 Holes, 0.21 in Hole Diameter, 0.04 in Leaf Thickness, 2 in Door Leaf Length, 2 in Frame Leaf Length, 0.1 in Diameter Pin, Surface Mounting, Fasteners: Screws, 5 lb Load Capacity, 1 in Overall Width, Solid Brass, Solid Brass, For Small Chests, Jewelry Boxes and Craft Projects National Hardware Narrow Hinge, Decorative, Series: V1800, 6 Holes, 0.21 in Hole Diameter, 0.04 in Leaf Thickness, 2 in Door Leaf Length, 2 in Frame Leaf Length, 0.1 in Diameter Pin, Surface Mounting, Fasteners: Screws, 5 lb Load Capacity, 1 in Overall Width, Solid Brass, Antique Brass, For Small Chests, Jewelry Boxes and Craft Projects National Hardware Chest Handle, Series: V175, Suitable For Use With: Small Chests and Boxes, 3-1/2 in, 200 lb Safe Working Load, Steel, Zinc Plated, 3.35 in Length X 2.74 in Height, BHMA A138.18
Amerock Village Classics BP19321WN Birdcage Oval Cabinet Knob Mintcraft C893CH Round Mushroom Cabinet Knob Knape & Vogt 1805HWH400 Euro Self-Close Drawer Slide
Knob with 2-9/16" length x 7/8" width x 1-1/2" height. Use with one #8-32 x 1" type screw. Easy to match any decor. 1-3/8" diameter. Includes screws. Specially designed for use in kitchen cabinet, commercial millwork, home office and RTA furniture applications. Adaptable to face frame or 32mm mounting. Single captive roller limits side play for improved lateral stability. Positive double out-stop. Positive in-stop. Lift-out disconnect. Four way adjustment slots. Positive lock-open position. Cabinet member side mounts. Additional rear mounting socket available for face frame applications. Drawer member fastens to either side or bottom of drawer. Height 1.4". Required Clearance; Side: 1/2" plus 1/32" minus 0 each side. Top:1" required for drawer lift out. Bottom: None drawer can rest on cabinet. Packed with screws and installation instructions. Maximum drawer width 18".
National Hardware V1801 Narrow Hinge Frost King H4128FS3 Stair Edging Amerock Kane BP53700G10 Round Cabinet Knob
National Hardware Narrow Hinge, Series: V1801, 0.21 in Hole Diameter, 0.04 in Leaf Thickness, 2 in Door Leaf Length, 2 in Frame Leaf Length, 0.1 in Diameter Pin, Wall Mounting, Fasteners: Screws, 5 lb Load Capacity, 1-3/16 in Overall Width, Solid Brass, For Bookcases and Kitchen Cabinets Covers and protects the edge of carpeted, wood, or tiled stairs. Reduces wear and tear. Knob with 1-1/4" diameter x 1-1/4" height. Use with one #8-32 x 1" type screw.
National Hardware N211-854 Decorative Hinge National Hardware N211-847 Decorative Hinge Knape & Vogt 1805HWH450 Euro Self-Close Drawer Slide
National Hardware Decorative Hinge, Series: V1814, 6 Holes, 0.23 in Hole Diameter, 0.04 in Leaf Thickness, 1.7 in Door Leaf Length, 1.7 in Frame Leaf Length, 0.1 in Diameter Pin, Fasteners: Screws, 3.06 in Overall Width, Solid Brass, Antique Brass National Hardware Decorative Hinge, Series: V1814, 6 Holes, 0.23 in Hole Diameter, 0.04 in Leaf Thickness, 1.7 in Door Leaf Length, 1.7 in Frame Leaf Length, 0.1 in Diameter Pin, Fasteners: Screws, 3.06 in Overall Width, Solid Brass, Solid Brass Specially designed for use in kitchen cabinet, commercial millwork, home office and RTA furniture applications. Adaptable to face frame or 32mm mounting. Single captive roller limits side play for improved lateral stability. Positive double out-stop. Positive in-stop. Lift-out disconnect. Four way adjustment slots. Positive lock-open position. Cabinet member side mounts. Additional rear mounting socket available for face frame applications. Drawer member fastens to either side or bottom of drawer. Height 1.4". Required Clearance; Side: 1/2" plus 1/32" minus 0 each side. Top:1" required for drawer lift out. Bottom: None drawer can rest on cabinet. Packed with screws and installation instructions. Maximum drawer width 18".
Knape & Vogt 1175P ZC 20 Light Duty Single Track Drawer Slide SLIDE DRWR 75LB 300MM WHT 12IN Knape & Vogt 1175P ZC 22-5/8 Light Duty Single Track Drawer Slide
Light-Duty slide designed for general drawer applications. Mounts with staples or screws. Height: 1". Required Clearance:1/8" each side; 1-1/2" from rear of drawer to cabinet; drawer to be 3/8" shallower than opening. High density polyethylene rollers. Drawers lift out for easy removal. Packaged with screws and installation instructions. Specially designed for use in kitchen cabinet, commercial millwork, home office and RTA furniture applications. Adaptable to face frame or 32mm mounting. Single captive roller limits side play for improved lateral stability. Positive double out-stop. Positive in-stop. Lift-out disconnect. Four way adjustment slots. Positive lock-open position. Cabinet member side mounts. Additional rear mounting socket available for face frame applications. Drawer member fastens to either side or bottom of drawer. Height 1.4". Required Clearance; Side: 1/2" plus 1/32" minus 0 each side. Top:1" required for drawer lift out. Bottom: None drawer can rest on cabinet. Packed with screws and installation instructions. Maximum drawer width 18". Light-Duty slide designed for general drawer applications. Mounts with staples or screws. Height: 1". Required Clearance:1/8" each side; 1-1/2" from rear of drawer to cabinet; drawer to be 3/8" shallower than opening. High density polyethylene rollers. Drawers lift out for easy removal. Packaged with screws and installation instructions.
Amerock Hint of Heritage BP1466G10 Round Cabinet Knob National Hardware N211-375 Decorative Broad Hinge National Hardware N211-383 Decorative Broad Hinge
Use with one #8-32 x 1" type screw. National Hardware Broad Hinge, Decorative, Series: V1802, 6 Holes, 0.04 in Leaf Thickness, 2 in Door Leaf Length, 2 in Frame Leaf Length, 0.01 in Diameter Pin, Surface Mounting, Fasteners: Screws, 5 lb Load Capacity, 1-3/8 in Overall Width, Solid Brass, Solid Brass, For Small Chests, Jewelry Boxes and Craft Projects National Hardware Broad Hinge, Decorative, Series: V1802, 6 Holes, 0.04 in Leaf Thickness, 2 in Door Leaf Length, 2 in Frame Leaf Length, 0.01 in Diameter Pin, Surface Mounting, Fasteners: Screws, 5 lb Load Capacity, 1-3/8 in Overall Width, Solid Brass, Antique Brass, For Small Chests, Jewelry Boxes and Craft Projects
HANDLE CHEST ZN PLT 3-1/2IN   Knape & Vogt 1805HWH500 Euro Self-Close Drawer Slide Knape & Vogt 1175P ZC 24 Light Duty Single Track Drawer Slide
Designed for small chests and boxes. Handle allows for in use hand clearance. Easy grip handle. Safe working load 200 lbs. Specially designed for use in kitchen cabinet, commercial millwork, home office and RTA furniture applications. Adaptable to face frame or 32mm mounting. Single captive roller limits side play for improved lateral stability. Positive double out-stop. Positive in-stop. Lift-out disconnect. Four way adjustment slots. Positive lock-open position. Cabinet member side mounts. Additional rear mounting socket available for face frame applications. Drawer member fastens to either side or bottom of drawer. Height 1.4". Required Clearance; Side: 1/2" plus 1/32" minus 0 each side. Top:1" required for drawer lift out. Bottom: None drawer can rest on cabinet. Packed with screws and installation instructions. Maximum drawer width 18". Light-Duty slide designed for general drawer applications. Mounts with staples or screws. Height: 1". Required Clearance:1/8" each side; 1-1/2" from rear of drawer to cabinet; drawer to be 3/8" shallower than opening. High density polyethylene rollers. Drawers lift out for easy removal. Packaged with screws and installation instructions.
HINGE ANT BRASS 1-1/2X1-1/4IN M-D 79038 Fluted Tile Edge National Hardware N117-002 Chest Handle
Designed for small chests, jewelry boxes, craft projects, etc. Surface mount for easy installation. Screws included. Clear lacquer protective coating. Visual-pack. Tile edging covers seams and joints in vinyl tile floor coverings. Includes screw nails to secure edging. National Hardware Chest Handle, Series: V175, Suitable For Use With: Small Chests and Boxes, 3-1/2 in, 200 lb Safe Working Load, Steel, Zinc Plated, 4.23 in Length X 0.46 in Width X 3.53 in Height, BHMA A138.18
Knape & Vogt 1805HWH550 Euro Self-Close Drawer Slide National Hardware N211-250 Decorative Narrow Hinge National Hardware N211-268 Decorative Narrow Hinge
Specially designed for use in kitchen cabinet, commercial millwork, home office and RTA furniture applications. Adaptable to face frame or 32mm mounting. Single captive roller limits side play for improved lateral stability. Positive double out-stop. Positive in-stop. Lift-out disconnect. Four way adjustment slots. Positive lock-open position. Cabinet member side mounts. Additional rear mounting socket available for face frame applications. Drawer member fastens to either side or bottom of drawer. Height 1.4". Required Clearance; Side: 1/2" plus 1/32" minus 0 each side. Top:1" required for drawer lift out. Bottom: None drawer can rest on cabinet. Packed with screws and installation instructions. Maximum drawer width 18". National Hardware Narrow Hinge, Decorative, Series: V1800, 6 Holes, 0.22 in Hole Diameter, 0.05 in Leaf Thickness, 2-1/2 in Door Leaf Length, 2-1/2 in Frame Leaf Length, 0.1 in Diameter Pin, Surface Mounting, Fasteners: Screws, 6 lb Load Capacity, 1.13 in Overall Width, Solid Brass, Solid Brass, For Small Chests, Jewelry Boxes and Craft Projects National Hardware Narrow Hinge, Decorative, Series: V1800, 6 Holes, 0.22 in Hole Diameter, 0.05 in Leaf Thickness, 2-1/2 in Door Leaf Length, 2-1/2 in Frame Leaf Length, 0.1 in Diameter Pin, Surface Mounting, Fasteners: Screws, 6 lb Load Capacity, 1-1/8 in Overall Width, Solid Brass, Antique Brass, For Small Chests, Jewelry Boxes and Craft Projects
National Hardware V1805 Decorative Desk Hinge M-D 78022 Fluted Stair Edging National Hardware N135-301 Decorative Cabinet Hinge
National Hardware Desk Hinge, Decorative, Series: V1805, 6 Holes, 0.21 in Hole Diameter, 0.04 in Leaf Thickness, 1-1/2 in Door Leaf Length, 1-1/2 in Frame Leaf Length, 0.1 in Diameter Pin, Surface, Flush Mounting, Fasteners: Screws, 5 lb Load Capacity, 2 in Overall Width, Solid Brass, For Desks, Lids, Chests, Cabinets and Table Leaves Fluted edging protects and improves the appearance of stair edges. 1/8"H. National Hardware Cabinet Hinge, Decorative, Series: V485, 6 Holes, 0.05 in Leaf Thickness, 1.66 in Door Leaf Length, 1-1/4 in Door Leaf Width, 1.66 in Frame Leaf Length, 1-1/4 in Frame Leaf Width, 1/8 in Diameter Pin, Surface Mounting, 8 lb Load Capacity, 2.81 in Overall Length, 2.81 in Overall Width, 0.05 in Overall Depth, Cold Rolled Steel
HINGE ANT BRASS 1-1/2X7/8IN   Frost King H4128FB3 Fluted Stair Edging Amerock BP19009SS Cabinet T- Knob
National Hardware Ball Tip Hinge, Series: V1816, 4 Holes, 0.16 in Hole Diameter, 0.04 in Leaf Thickness, 1-1/2 in Door Leaf Length, 0.1 in Dia Pin, Surface Mounting, 5 lb Load Capacity, 7/8 in Overall Length, 2 in Overall Width, Solid Brass, Antique Brass, Includes: Solid Brass Screws, For Small Chests, Jewelry Boxes and Craft Projects Covers and protects the edge of carpeted, wood, or tiled stairs. Reduces wear and tear. Knob with 50mm length x 12mm width. Use with one #8-32 x 1" type screw.
National Hardware V1801 Narrow Hinge National Hardware N211-391 Decorative Broad Hinge National Hardware N211-409 Decorative Broad Hinge
National Hardware Narrow Hinge, Series: V1801, 0.23 in Hole Diameter, 0.05 in Leaf Thickness, 2-1/2 in Door Leaf Length, 2-1/2 in Frame Leaf Length, 0.1 in Diameter Pin, Wall Mounting, Fasteners: Screws, 6 lb Load Capacity, 1-9/16 in Overall Width, Solid Brass, For Bookcases and Kitchen Cabinets National Hardware Broad Hinge, Decorative, Series: V1802, 6 Holes, 0.23 in Hole Diameter, 0.05 in Leaf Thickness, 2-1/2 in Door Leaf Length, 2-1/2 in Frame Leaf Length, 0.01 in Diameter Pin, Surface Mounting, Fasteners: Screws, 6 lb Load Capacity, 13/4 in Overall Width, Solid Brass, Solid Brass, For Small Chests, Jewelry Boxes and Craft Projects National Hardware Broad Hinge, Decorative, Series: V1802, 6 Holes, 0.23 in Hole Diameter, 0.05 in Leaf Thickness, 2-1/2 in Door Leaf Length, 2-1/2 in Frame Leaf Length, 0.01 in Diameter Pin, Surface Mounting, Fasteners: Screws, 6 lb Load Capacity, 1-3/4 in Overall Width, Solid Brass, Antique Brass, For Small Chests, Jewelry Boxes and Craft Projects
National Hardware N261-768 Decorative Ball Tip Hinge National Hardware N213-553 Decorative Ball Tip Hinge BULLNOSE 5/16INX8FT PVC WHITE
National Hardware Ball Tip Hinge, Decorative, Series: V1806, 6 Holes, 0.21 in Hole Diameter, 0.04 in Leaf Thickness, 2 in Door Leaf Length, 2 in Frame Leaf Length, 0.1 in Diameter Pin, Surface Mounting, Fasteners: Screws, 5 lb Load Capacity, 2-1/2 in Overall Length, 1-3/8 in Overall Width, Solid Brass, Solid Brass, For Small Chests National Hardware Ball Tip Hinge, Decorative, Series: V1806, 6 Holes, 0.21 in Hole Diameter, 0.04 in Leaf Thickness, 2 in Door Leaf Length, 2 in Frame Leaf Length, 0.1 in Diameter Pin, Surface Mounting, Fasteners: Screws, 5 lb Load Capacity, 2-1/2 in Overall Length, 1-3/8 in Overall Width, Solid Brass, Antique Brass, For Small Chests
BULLNOSE 5/16INX8FT PVC BEIGE Knape & Vogt 1284PWH400 Euro Roller Slide M-D 73792 Round Edge Trim Wall
Medium-duty slide designed for kitchen cabinet and bathroom vanity applications. Adaptable to frame mounting and 32mm mounting system. Solid stud and captive roller reduces side play. Positive stop, lift-out disconnect, stay-closed design. Adjustment slots on both the drawer member and the cabinet member ease installation. Screws fasten to either side or bottom of drawer. Positive lock-out feature is ideal for pull out work surfaces. Height: 1-9/32". Required Clearance: 1/2" plus 1/32" minus 0 each side. 1" between overall drawer side height and cabinet opening height required for drawer insertion and removal. Packaged with screws and installation instructions. Maximum drawer width 18". Added decor and protection to wall and floor tile.
M-D 73820 Round Tile Edge National Hardware V1812 Decorative Hinge M-D 79020 Fluted Stair Edging
Added decor and protection to wall and floor tile. National Hardware Decorative Hinge, Series: V1812, 6 Holes, 0.22 in Hole Diameter, 0.06 in Leaf Thickness, 1-5/16 in Door Leaf Length, 1-5/16 in Frame Leaf Length, 0.15 in Diameter Pin, Surface Mounting, Fasteners: Screws, 2-7/8 in Overall Width, Solid Brass, Solid Brass, For Desks, Lids, Chests, Cabinets and Table Leaves Fluted edging protects and improves the appearance of stair edges. 1/8"H.
Knape & Vogt 1284PWH450 Drawer Slide National Hardware N135-335 Decorative Cabinet Hinge Knape & Vogt 1260P-16 Light Duty Drawer Slide
Medium-duty slide designed for kitchen cabinet and bathroom vanity applications. Adaptable to frame mounting and 32mm mounting system. Solid stud and captive roller reduces side play. Positive stop, lift-out disconnect, stay-closed design. Adjustment slots on both the drawer member and the cabinet member ease installation. Screws fasten to either side or bottom of drawer. Positive lock-out feature is ideal for pull out work surfaces. Height: 1-9/32". Required Clearance: 1/2" plus 1/32" minus 0 each side. 1" between overall drawer side height and cabinet opening height required for drawer insertion and removal. Packaged with screws and installation instructions. Maximum drawer width 18". National Hardware Cabinet Hinge, Decorative, Series: V485, 6 Holes, 0.05 in Leaf Thickness, 1.66 in Door Leaf Length, 1-1/4 in Door Leaf Width, 1.66 in Frame Leaf Length, 1-1/4 in Frame Leaf Width, 1/8 in Diameter Pin, Surface Mounting, 8 lb Load Capacity, 2.81 in Overall Length, 2.81 in Overall Width, 0.05 in Overall Depth, Cold Rolled Steel Light-Duty slide designed for general cabinet, desk and fixture application. Height: 3-1/8". Required Clearance: 1/2" plus 1/32" minus 0 each side. Features Positive stop. Stay-closed design. Depress stop lever for drawer removal. Dust shielded ball bearing rollers. Packaged with screws and installation instructions. Maximum drawer width 18".
M-D 43878 Fluted Stair Edging Knape & Vogt 1284PALM500 Euro Roller Slide National Hardware V629 Flush/Full Inset Cabinet Hinge
Fluted edging protects and improves the appearance of stair edges. 1/8"H. Medium-duty slide designed for kitchen cabinet and bathroom vanity applications. Adaptable to frame mounting and 32mm mounting system. Solid stud and captive roller reduces side play. Positive stop, lift-out disconnect, stay-closed design. Adjustment slots on both the drawer member and the cabinet member ease installation. Screws fasten to either side or bottom of drawer. Positive lock-out feature is ideal for pull out work surfaces. Height: 1-9/32". Required Clearance: 1/2" plus 1/32" minus 0 each side. 1" between overall drawer side height and cabinet opening height required for drawer insertion and removal. Packaged with screws and installation instructions. Maximum drawer width 18". National Hardware Cabinet Hinge, Flush/Full Inset, Series: V629, 6 Holes, 0.23 in Hole Diameter, 0.06 in Leaf Thickness, 2-1/2 in Door Leaf Length, 2-1/2 in Frame Leaf Length, Removable Pin, 0.13 in Diameter Pin, 20 lb Load Capacity, 2-1/2 in Overall Width, Cold Rolled Steel, Brass, Includes: Mounting Screws, 170 deg Opening
KNOB STN NKL 1-3/4IN DIA      Knape & Vogt 1284PWH500 Drawer Slide National Hardware V175 Chest Handle
Designed for cabinet doors and drawers from 5/8 inch to 1-1/2 inch thick. Provides easy opening and closing of drawers and cabinet doors. Truss head machine screw included. 1-3/4" Dia. Visual-pack. Medium-duty slide designed for kitchen cabinet and bathroom vanity applications. Adaptable to frame mounting and 32mm mounting system. Solid stud and captive roller reduces side play. Positive stop, lift-out disconnect, stay-closed design. Adjustment slots on both the drawer member and the cabinet member ease installation. Screws fasten to either side or bottom of drawer. Positive lock-out feature is ideal for pull out work surfaces. Height: 1-9/32". Required Clearance: 1/2" plus 1/32" minus 0 each side. 1" between overall drawer side height and cabinet opening height required for drawer insertion and removal. Packaged with screws and installation instructions. Maximum drawer width 18". National Hardware Chest Handle, Series: V175, Suitable For Use With: Small Chests and Boxes, 4 in, 180 lb Safe Working Load, Steel, Zinc Plated, 4.88 in Length X 0.58 in Width X 4.13 in Height, BHMA A138.18
Knape & Vogt 1260P-18 Light Duty Drawer Slide KNOB 1-1/2IN 38MM POL CHROME  Knape & Vogt 1300P ZC 12 Drawer Slide
Light-Duty slide designed for general cabinet, desk and fixture application. Height: 3-1/8". Required Clearance: 1/2" plus 1/32" minus 0 each side. Features Positive stop. Stay-closed design. Depress stop lever for drawer removal. Dust shielded ball bearing rollers. Packaged with screws and installation instructions. Maximum drawer width 18". Use with one #8-32 x 1" type screw. Includes two different screw lengths for your convenience. Designed for medium duty applications where a lever release is desired. For kitchen cabinet, vanity, desk and store fixture applications. Height: 3".  Required Clearance: 1/2" plus 1/32" minus 0 each side. Features Positive stop lever that prevents accidental drawer removal.  Zinc-plated cold rolled steel. Ball bearing nylon rollers. Packaged with screws and installation instructions. Maximum drawer width 18".
Knape & Vogt 1284PALM550 Euro Roller Slide Knape & Vogt 1284PWH550 Drawer Slide Knape & Vogt 1300P ZC 14 Drawer Slide
Medium-duty slide designed for kitchen cabinet and bathroom vanity applications. Adaptable to frame mounting and 32mm mounting system. Solid stud and captive roller reduces side play. Positive stop, lift-out disconnect, stay-closed design. Adjustment slots on both the drawer member and the cabinet member ease installation. Screws fasten to either side or bottom of drawer. Positive lock-out feature is ideal for pull out work surfaces. Height: 1-9/32". Required Clearance: 1/2" plus 1/32" minus 0 each side. 1" between overall drawer side height and cabinet opening height required for drawer insertion and removal. Packaged with screws and installation instructions. Maximum drawer width 18". Medium-duty slide designed for kitchen cabinet and bathroom vanity applications. Adaptable to frame mounting and 32mm mounting system. Solid stud and captive roller reduces side play. Positive stop, lift-out disconnect, stay-closed design. Adjustment slots on both the drawer member and the cabinet member ease installation. Screws fasten to either side or bottom of drawer. Positive lock-out feature is ideal for pull out work surfaces. Height: 1-9/32". Required Clearance: 1/2" plus 1/32" minus 0 each side. 1" between overall drawer side height and cabinet opening height required for drawer insertion and removal. Packaged with screws and installation instructions. Maximum drawer width 18". Designed for medium duty applications where a lever release is desired. For kitchen cabinet, vanity, desk and store fixture applications. Height: 3".  Required Clearance: 1/2" plus 1/32" minus 0 each side. Features Positive stop lever that prevents accidental drawer removal.  Zinc-plated cold rolled steel. Ball bearing nylon rollers. Packaged with screws and installation instructions. Maximum drawer width 18".
National Hardware N135-194 Decorative Cabinet Hinge Knape & Vogt 1260P-20 Light Duty Drawer Slide National Hardware V1805 Decorative Desk Hinge
CABINET HINGES 1IN BRS
Our Price: $8.76
National Hardware Cabinet Hinge, Decorative, Series: V475, 6 Holes, 0.05 in Leaf Thickness, 1-5/8 in Door Leaf Length, 1-1/2 in Door Leaf Width, 1-5/8 in Frame Leaf Length, 1-1/2 in Frame Leaf Width, Surface Mounting, 8 lb Load Capacity, 3 in Overall Width, Cold Rolled Steel, Brass, For Commercial/Industrial and Residential Applications Light-Duty slide designed for general cabinet, desk and fixture application. Height: 3-1/8". Required Clearance: 1/2" plus 1/32" minus 0 each side. Features Positive stop. Stay-closed design. Depress stop lever for drawer removal. Dust shielded ball bearing rollers. Packaged with screws and installation instructions. Maximum drawer width 18". National Hardware Desk Hinge, Decorative, Series: V1805, 6 Holes, 0.24 in Hole Diameter, 0.06 in Leaf Thickness, 2 in Door Leaf Length, 2 in Frame Leaf Length, 0.15 in Diameter Pin, Surface, Flush Mounting, Fasteners: Screws, 11 lb Load Capacity, 3-1/16 in Overall Width, Solid Brass, For Desks, Lids, Chests, Cabinets and Table Leaves
KNOB STN NKL 1-3/4IN DIA      KNOB ORB 1-3/4IN DIA          KNOB BRASS 1-3/4IN DIA
KNOBS 1-3/4IN DIA ORB
Our Price: $8.94
KNOBS 1-3/4IN DIA BRS
Our Price: $8.94
Designed for cabinet doors and drawers from 5/8 inch to 1-1/2 inch thick. Provides easy opening and closing of drawers and cabinet doors. Truss head machine screw included. 1-3/4" Dia. Visual-pack. Designed for cabinet doors and drawers from 5/8 inch to 1-1/2 inch thick. Provides easy opening and closing of drawers and cabinet doors. Truss head machine screw included. 1-3/4" Dia. Visual-pack. Designed for cabinet doors and drawers from 5/8 inch to 1-1/2 inch thick. Provides easy opening and closing of drawers and cabinet doors. Truss head machine screw included. 1-3/4" Dia. Visual-pack.
Knape & Vogt 1300P ZC 18 Drawer Slide Knape & Vogt 1300P ZC 16 Drawer Slide Knape & Vogt 1260P-22 Light Duty Drawer Slide
Designed for medium duty applications where a lever release is desired. For kitchen cabinet, vanity, desk and store fixture applications. Height: 3".  Required Clearance: 1/2" plus 1/32" minus 0 each side. Features Positive stop lever that prevents accidental drawer removal.  Zinc-plated cold rolled steel. Ball bearing nylon rollers. Packaged with screws and installation instructions. Maximum drawer width 18". Designed for medium duty applications where a lever release is desired. For kitchen cabinet, vanity, desk and store fixture applications. Height: 3".  Required Clearance: 1/2" plus 1/32" minus 0 each side. Features Positive stop lever that prevents accidental drawer removal.  Zinc-plated cold rolled steel. Ball bearing nylon rollers. Packaged with screws and installation instructions. Maximum drawer width 18". Light-Duty slide designed for general cabinet, desk and fixture application. Height: 3-1/8". Required Clearance: 1/2" plus 1/32" minus 0 each side. Features Positive stop. Stay-closed design. Depress stop lever for drawer removal. Dust shielded ball bearing rollers. Packaged with screws and installation instructions. Maximum drawer width 18".
Knape & Vogt PBP10016 Precision Drawer Slide Knape & Vogt 1300P ZC 20 Drawer Slide Amerock Inspirations BP15862ORB 3-Ring Round Cabinet Knob
Direct access mounting holes, precision ball bearings, telescopic action, non-handed design, and lever disconnect. Includes screws for installation. Height: 1-1/8". Clearance required: 1/2" plus 1/32" minus 0 each side. Maximum drawer width 24". Designed for medium duty applications where a lever release is desired. For kitchen cabinet, vanity, desk and store fixture applications. Height: 3".  Required Clearance: 1/2" plus 1/32" minus 0 each side. Features Positive stop lever that prevents accidental drawer removal.  Zinc-plated cold rolled steel. Ball bearing nylon rollers. Packaged with screws and installation instructions. Maximum drawer width 18". Use with one #8-32 x 1" type screw. Protected by Guardian Lifetime finish.
Amerock Inspirations BP15862G10 3-Ring Round Cabinet Knob M-D 78113 Fluted Tile Edge Knape & Vogt 1300P ZC 22 Drawer Slide
Use with one #8-32 x 1" type screw. Protected by Guardian Lifetime finish. Tile edging covers seams and joints in vinyl tile floor coverings. Includes screw nails to secure edging. Designed for medium duty applications where a lever release is desired. For kitchen cabinet, vanity, desk and store fixture applications. Height: 3".  Required Clearance: 1/2" plus 1/32" minus 0 each side. Features Positive stop lever that prevents accidental drawer removal.  Zinc-plated cold rolled steel. Ball bearing nylon rollers. Packaged with screws and installation instructions. Maximum drawer width 18".
Knape & Vogt PBP10018 Precision Drawer Slide Knape & Vogt 1300P ZC 24 Drawer Slide Frost King H4128FS6 Stair Edging
Direct access mounting holes, precision ball bearings, telescopic action, non-handed design, and lever disconnect. Includes screws for installation. Height: 1-1/8". Clearance required: 1/2" plus 1/32" minus 0 each side. Maximum drawer width 24". Designed for medium duty applications where a lever release is desired. For kitchen cabinet, vanity, desk and store fixture applications. Height: 3".  Required Clearance: 1/2" plus 1/32" minus 0 each side. Features Positive stop lever that prevents accidental drawer removal.  Zinc-plated cold rolled steel. Ball bearing nylon rollers. Packaged with screws and installation instructions. Maximum drawer width 18". Covers and protects the edge of carpeted, wood, or tiled stairs. Reduces wear and tear.
Amerock Allison TEN53005G10 Cabinet Knob Set Knape & Vogt PBP10020 Precision Drawer Slide KNOB 1-1/4IN POLISHED BRASS
Knob with 1-1/4" diameter x 1-1/8" height. Use with one #8-32 x 1" type screw. Direct access mounting holes, precision ball bearings, telescopic action, non-handed design, and lever disconnect. Includes screws for installation. Height: 1-1/8". Clearance required: 1/2" plus 1/32" minus 0 each side. Maximum drawer width 24". 1-1/4" height x 1-1/4" width, 1-1/8" projection. Zinc base. 8-32 x 1" screws included.
KNOB 1-5/16IN BRUSHED CHROME  M-D 78105 Fluted Stair Edging M-D 79111 Fluted Tile Edge
Knob with 1-5/16" diameter x 7/8" height. Use with one #8-32 x 1" type screw. Fluted edging protects and improves the appearance of stair edges. 1/8"H. Tile edging covers seams and joints in vinyl tile floor coverings. Includes screw nails to secure edging.
TILE EDGE 1/2IN X 8FT MILL    Knape & Vogt PBP10022 Precision Drawer Slide STAIR EDGE FLUTE 36IN SAT SILV
Direct access mounting holes, precision ball bearings, telescopic action, non-handed design, and lever disconnect. Includes screws for installation. Height: 1-1/8". Clearance required: 1/2" plus 1/32" minus 0 each side. Maximum drawer width 24".
STAIR EDGE FLUTE 36IN SAT NICK STAIR EDGE FLUTE 36IN SPICE   Frost King H4128FB6 Fluted Stair Edging
Covers and protects the edge of carpeted, wood, or tiled stairs. Reduces wear and tear.
M-D 79103 Fluted Stair Edging M-D 10793 L-Shape Tile Edge M-D 85530 Floor Edge Reducer
Fluted edging protects and improves the appearance of stair edges. 1/8"H. Provides transition and protection where tile meets other flooring surfaces. Serrated base creates strong metal-adhesive bond. Reducers cover seams and joints in linoleum, floor tile and other similar floor coverings. Includes screws to secure to floor. 1/2"H.
M-D 43880 Fluted Stair Edging KNOB 1-1/2IN 38MM SATIN NICKEL M-D 85555 Oak Molding
Fluted edging protects and improves the appearance of stair edges. 1/8"H. Oversized knob with 1-1/2? diameter x 1? height. Use with one #8-32 x 1? type screw. Reducers cover seams and joints in linoleum, floor tile and other similar floor coverings. Includes screws to secure to floor. 1/2"H.
M-D 19750 L-Shape Tile Edge Amerock Allison TEN53005ORB Cabinet Knob Set M-D 10850 L-Shape Tile Edge
Provides transition and protection where tile meets other flooring surfaces. Serrated base creates strong metal-adhesive bond. Knob with 1-1/4" diameter x 1-1/8" height. Use with one #8-32 x 1" type screw. Provides transition and protection where tile meets other flooring surfaces. Serrated base creates strong metal-adhesive bond.
TILE EDGE 3/8IN X 8FT PEWTER  M-D 78345 Fluted Stair Edging North States 4604 Security Gate
Provides transition and protection where tile meets other flooring surfaces. Fluted edging protects and improves the appearance of stair edges. 1/8"H. Pressure-mounts instantly, securely without hardware. Wood frame with rigid diamond mesh panels and no-mar rubber bumpers. EZ-Adjust and Lock feature. Width expands 26" to 42".
TILE EDGE 3/8X8FT COPPR BRONZE Knape & Vogt 8400P16 Full Extension Drawer Slide M-D 79558 Fluted Stair Edging
Provides transition and protection where tile meets other flooring surfaces. Medium-duty, precision slides for box drawer or pedestal file drawers up to 24" wide. For frame and frameless construction. May be used horizontal position with a reduced load rating of 30 pounds. Height:1-13/16" Clearance required: 1/2" plus 1/32" minus 0 each side. Features telescoping, full extension on precision steel ball bearings. 32mm hole pattern with direct access mounting. Lever disconnect for easy drawer removal. Ball retainer latch and ramps, for easy drawer insertion. Drawer adjustment without removal. Flexible mounting tabs self-adjust to side clearance. Metal ball retainer holds 3 bearings per inch of race for smooth and quiet motion. Polymer stop cushions. Non-handed. Packaged with screws and installation instructions. Fluted edging protects and improves the appearance of stair edges. 1/8"H.