Home > HARDWARE > GENERAL HARDWARE > CABINET & DRAWER HARDWARE > CABINET HINGES - "H' STYLE
Sort By:
1
Amerock Allison BP3401CB Cabinet Pull Amerock Allison 894ABS Cabinet Pull PULL CABINET BRSH CHROME 3IN
Pull with 3-1/4" center, 5-1/16" length x 1" width x 3/4" height. Use with two #8-32 x 1" type screws. Pull with 3" center, 4-5/16" length x 7/8" height. Use with two #8-32 x 1" type screws. Solid brass wire pull with 3" center, 3.312" length x .375" width x 1.25" height. Use with two #8-32 x 1" type screws.
Amerock Allison BP803PW Wired Cabinet Pull Amerock Allison 253G10 Cabinet Pull Amerock Allison BP34163 Basic Modern Cabinet Pull
Pull with 3" center, 3-5/16" length x 3/8" width x 1-1/4" height. Use with two #8-32 x 1" type screws. Pull with 3" center, 4-7/8" length x 5/8" width x 1" height. Use with two #8-32 x 1" type screws. Pull with 3" center, 4" length x 7/16" width x 3/4" height. Use with two #8-32 x 1" type screws.
Amerock Allison BP341626 Basic Modern Cabinet Pull Amerock Allison BP3441BB Harmony Cabinet Pull Amerock Allison BP34413 Harmony Cabinet Pull
Pull with 3" center, 4" length x 7/16" width x 3/4" height. Use with two #8-32 x 1" type screws. Pull with 3" center, 3.375" length x 0.312" width x 1.125" height. Use with two #8-32 x 1" type screws. Pull with 3" center, 3.375" length x 0.312" width x 1.125" height. Use with two #8-32 x 1" type screws.
PULL 3IN 76MM SAT NICKEL      Mintcraft Traditional Classics SF843AB Center Ring Cabinet Pull Amerock Allison 253LB Cabinet Pull
3? Center-to-Center, 0.79? projection. 3"L - Polybagged. With screws. Pull with 3" center, 4-7/8" length x 5/8" width x 1" height. Use with two #8-32 x 1" type screws.
DRAWER PULL 96MM FLAT BLACK   Mintcraft Traditional Classics SF816CH Pitcher Cabinet Pull DRAWER PULL 4IN BRUSHED CHROME
Pull with 3-3/4" (96mm) center to center, 4-15/16? (125mm) L x 1/2? (13mm) W x 15/16? (24mm) H. Screw Size(s):  #8-32 x 1?L machine screw. 3"L - Polybagged. With screws. Transitional style, 4-5/16? length, 5/16? width, 1-1/4? projection, 4? mounting hole.
Amerock Allison BP86526D Wired Cabinet Pull Amerock Allison 252PB Cabinet Pull Mintcraft Traditional Classics SF814PB Spoon Foot Cabinet Pull
Solid brass wire pull with 3" center, 3.312" length x .375" width x 1.25" height. Use with two #8-32 x 1" type screws. Pull with 3" center, 5-1/2" length x 5/8" width x 1" height. Use with two #8-32 x 1" type screws. 3"L - Polybagged. With screws.
Mintcraft Traditional Classics SF816PB Pitcher Cabinet Pull PULL 3-3/4IN 96MM SATIN NICKEL PULL 3-3/4IN OILRUB BRONZE
3"L - Polybagged. With screws. Transitional style, metal finishes collection. 3-3/4 in (96 mm) center-to-center pull. Includes mounting hardware: (Size(s):#8-32 x 1in Truss Head Machine Screw). Transitional style, metal finishes collection. 3-3/4 in (96 mm) center-to-center pull. Includes mounting hardware: (Size(s):#8-32 x 1in Truss Head Machine Screw).
DRAWER PULL 3IN SATIN NICKEL  Amerock Allison BP341526 Basic Modern Bail Cabinet Pull Amerock Allison BP53470G10 Scroll Cabinet Pull
Transitional style pull with 3" center, 1-1/4" length x 5/8? width, 3-3/8" projection. Pull with 2-3/4" center, 3-7/16" length x 3/4" width x 15/16" height. Use with two #8-32 x 1" type screws. Pull with 3" center, 3-13/16" length x 11/16" width x 1-1/4" height. Use with two #8-32 x 1" type screws.
Mintcraft Traditional Classics SF843BNI Center Ring Cabinet Pull Amerock Allison BP52994G10 Narrow Arch Cabinet Pull Amerock Allison 937 Cabinet Pull
3"L - Polybagged. With screws. Transitional style pull, 3-3/4? (96mm) mounting holes. 1? projection, 4-3/16? overall length, 19/13? width. Use with two #8-32 x 1" type screws. Pull with 3" center, 3-1/2" length x 1/2" width x 1-1/8" height. Use with two #8-32 x 1" type screws.
Amerock Allison 245WPB Cabinet Pull Mintcraft Traditional Classics SF816BNI Pitcher Cabinet Pull Amerock BP7603 Back Plate
Metal pull with 3" center, 4-15/16" length x 3/4" width x 1-1/4" height. Use with two #8-32 x 1" type screws. White insert. 3"L - Polybagged. With screws. 1-3/4" diameter x 3/16" height.
PULL CUP BURNISHED BRASS 3IN  Amerock Allison 263WCH Cabinet Pull Amerock Essential'Z BP26201G10 Arch Tip Cabinet Pull
Pull with 3" center, 3-3/8" length x 1-1/4" width. Metal pull with 3" center, 5" length x 3/4" width x 1-1/4" height. Use with two #8-32 x 1" type screws. White insert. Pull with 3" center, 5-1/4" length x 3/8" width x 1" height. Use with two #8-32 x 1" type screws.
Amerock Allison BP53470ORB Scroll Cabinet Pull Amerock BP3404CB Cabinet Hinge Amerock Allison BP735AE Chatsworth Arch Cabinet Pull
Pull with 3" center, 3-13/16" length x 11/16" width x 1-1/4" height. Use with two #8-32 x 1" type screws. 3-1/2"L x 1-7/16"W - Polybagged. Pull with 3" center, 4-3/4" length x 3/4" width x 7/8" height. Use with two #8-32 x 1" type screws.
Amerock Allison BP52995G10 Arch Tip Cabinet Pull Amerock Allison BP52996G10 Flat Arch Cabinet Pull Amerock Anniversary BP874G9 Cabinet Pull
Pull with 96mm center. Use with two #8-32 x 1" type screws. Pull with 96mm center. Use with two #8-32 x 1" type screws. Pull with 3" center, 5" length x 1/2" width x 1-1/8" height. Use with two #8-32 x 1" type screws.
Amerock Anniversary BP874BN Cabinet Pull Amerock Allison BP53010G10 Cup Cabinet Pull Amerock Essential'Z BP19259G10 Open Arch Cabinet Pull
Pull with 3" center, 5" length x 1/2" width x 1-1/8" height. Use with two #8-32 x 1" type screws. Pull with 3" center, 3-3/8" length x 1-1/4" width. Pull with 3" center, 4-1/2" length x 9/16" width x 1" height. Use with two #8-32 x 1" type screws. Protected by Guardian Lifetime finish.
Mintcraft C202PB/OK Cabinet Pull Amerock Allison BP55222G10 Cabinet Pull M-D 06304 Replacement Threshold Insert
With oak handle center, easy to match any decor. 3"L - Polybagged. With screws. Pull with 3" center.  3.6" length x 0.556" width. Use two #8 - 32 x 1" type screw. Vinyl replacement inserts increase the longevity and value of the door sweeps. Use for L and U shaped model door bottom.
Amerock Bar Pulls BP19010SS Cabinet Pull Mintcraft CH-293 Decorative Cabinet Hinge DRAWER PULL 3IN SATIN NICKEL
Metal pull with 3" center to center, 5-1/3" length x 1/2" width x 1.34" height. Use with two #9-32 x 1" type screws. Decorative offset hinge with screws. 2 pieces. 3.43" height. Traditional style.
DRAWER PULL 3IN OIL-RUB BRONZE Amerock Inspirations BP1580WID Botanica Leaf Cabinet Pull Amerock BP19001SS Bow Cabinet Pull
Traditional style. Pull with 3" center, 5-5/8" length x 11/16" width x 1" height. Use with two #8-32 x 1" type screws. Protected by Guardian Lifetime finish. Pull with 3" center, 3-21/32" length x 3/8" width x 1-3/16" height. Use with two #8-32 x 1" type screws.
Amerock Inspirations BP1580R2 Botanica Leaf Cabinet Pull Amerock Revitalize BP55343ORB Cabinet Pull Amerock Inspirations BP1590WID Plain Cabinet Pull
Pull with 3" center, 5-5/8" length x 11/16" width x 1" height. Use with two #8-32 x 1" type screws. Protected by Guardian Lifetime finish. 3-5/8" length x 5/8" width x 1-5/16" height. Use two #8 - 32 x 1" type screw. Metal pull with 3" center, 5.625" length x 0.688" width x 1" height. Use with two #8-32 x 1" type screws.
DRAWER PULL 3IN ELEGANT BRASS Amerock Inspirations BP1590G10 Plain Cabinet Pull Amerock Allison BP176CAE Cabinet Pull
Pull with 3" center, 5-5/8" length x 11/16" width x 1" height. Use with two #8-32 x 1" type screws. Protected by Guardian Lifetime finish. Metal pull with 3" center, 5.625" length x 0.688" width x 1" height. Use with two #8-32 x 1" type screws. Pull with back plate and 3" center, 5-9/16" length x 1" width x 1-1/4" height. Use with two #8-32 x 1" type screws.
Amerock Inspirations BP1590ORB Plain Cabinet Pull Amerock Revitalize BP55343G10 Cabinet Pull Amerock Mulholland BP53030ORB Square Cabinet Pull
Metal pull with 3" center, 5.625" length x 0.688" width x 1" height. Use with two #8-32 x 1" type screws. 3-5/8" length x 5/8" width x 1-5/16" height. Use two #8 - 32 x 1" type screw. Pull with 3" center. 3-3/4" length x 3/4" width x 1-1/8" height. Use with two #8-32 x 1" type screws.
Amerock Kane BP53702G10 Transitional Cabinet Pull Amerock Inspirations BP1584ORB Rope Cabinet Pull Amerock Mulholland BP53030G10 Square Cabinet Pull
4-1/2" length x 3/4" width x 1-1/8" height. Use two #8-32 x 1" type screws. Pull with 3" center, 4-1/8" length x 7/16" width x 1-1/4" height. Use with two #8-32 x 1" type screws. Protected by Guardian Lifetime finish. Pull with 3" center. 3-3/4" length x 3/4" width x 1-1/8" height. Use with two #8-32 x 1" type screws.
Amerock Brass and Sterling Traditions BP1300ORB Traditional Cabinet Pull National Hardware V552 Flush/Full Inset Back Flap Hinge M-D 67967 Kerf Replacement Door Bottom
Metal pull with 3" center, 1.0625" height. Use with two #8-32 x 1" type screws. National Hardware Back Flap Hinge, Flush/Full Inset, Series: V552, 0.075 in Leaf Thickness, 1-1/2 in Door Leaf Length, 1-1/2 in Frame Leaf Length, Removable Pin, Surface, Wall Mounting, Fasteners: Screws, 3.482 in Overall Width, Hot Rolled Steel, Zinc Plated, For Residential Applications 1-3/4" dual vinyl fits a variety of doors with notched kerfs.
Amerock Essential'Z BP9365G10 Cup Cabinet Pull Frost King T35/36H Under-Door Threshold Kit Amerock Bar Pulls BP40515ORB Transitional Cabinet Pull
Pull with 2-1/2" center, 4-1/8" length x 1" width x 1" height. Use with two #8-32 x 1" type screws. Protected by Guardian Lifetime finish. Heavy duty premium low rug, residential use. For use with saddle thresholds. Pull with 3" center, 5-3/8" length x 1/2" width x 1-3/8" height. Use with two #8-32 x 1" type screws.
M-D 43200 Draft Buster Door and Window Seal Frost King UDB36BR Door Bottom M-D 47000 Door Bottom
No hardware or tools needed for installation. Protects against drafts and prevents heating and cooling from escaping. Can be slid underneath door to create a seal. Fits doors and windows up to 36". Foam seal features a washable cloth cover. For interior and exterior use. Dual L-shape door bottom for metal or wood doors. 1-3/4" vinyl dual fits variety of 1-3/4" steel or wood doors. Screw or nail on.
Amerock Essential'Z BP9362G10 Subtle Arch Cabinet Pull Amerock BP2811J2314 2-Way Concealed Face Frame Cabinet Hinge Amerock BP4613D14 Frameless Concealed Cabinet Hinge
Pull with 5" center, 7-3/16" length x 1/2" width x 1-1/4" height. Use with two #8-32 x 1" type screws. Protected by Guardian Lifetime finish. Add smooth, quiet action and lock-in place adjustment to any face frame cabinet. 110 degree, full inset, frameless hinge.
Frost King UDS36 Door Bottom National Hardware V550 Flush/Full Inset Chest Hinge HINGE CHEST BRASS 1-1/2X3/4IN
Replaces original steel door bottom. For Stanley and other doors. Seals out drafts, moisture, and dirt. 3/8"H. Polybagged. National Hardware Chest Hinge, Flush/Full Inset, Series: V550, 8 Holes, 0.2 in Hole Diameter, 0.08 in Leaf Thickness, 1-1/2 in Door Leaf Length, 1-1/2 in Frame Leaf Length, Removable Pin, 0.12 in Diameter Pin, Wall Mounting, 15 lb Load Capacity, 1.6 in Overall Length, 3.21 in Overall Width, Hot Rolled Steel, Zinc Plated National Hardware Chest Hinge, Series: V550, 8 Holes, 0.2 in Hole Diameter, 0.08 in Leaf Thickness, 3/4 in Frame Leaf Width, Tight Pin, 0.12 in Dia Pin, 15 lb Load Capacity, 3.21 in Overall Length, 1-1/2 in Overall Width, Hot Rolled Steel, Brass, For Chests, Cabinets and Storages Boxes
Amerock BP2811C1314 2-Way Concealed Self-Closing Frame Cabinet Hinge M-D 82586 Dual Door Bottom M-D 6015 L-Shape Door Sweep
Amerock Cabinet Hinge, 2-Way, Adjustable, Concealed, Self-Closing Frame, Nickel Plated, BHMS Approved, KCMA Certified, 1-1/4 in Overlay, 1-7/9 in Hole Pattern, 1/2 in Cup Depth, 105 deg Opening Angle Durable vinyl door bottom has soft vinyl fins to seal against top of threshold and sill. Good for steel doors. Fits 1-3/4" doors. L-shaped DCV 50 door bottom fits both 1-3/8" and 1-3/4" doors. Seals between bottom of door and threshold to block out air and moisture. Slotted fastener holes allow easy installation and adjustment. 1-3/32" height drip cap and 1/2" height door bottom.
National Hardware V552 Flush/Full Inset Back Flap Hinge Frost King U36H L-Shape Drip Cap Door Bottom Amerock BP4611A14 Frameless Concealed Mortise Full Overlay Cabinet Hinge
National Hardware Back Flap Hinge, Flush/Full Inset, Series: V552, 0.23 in Hole Diameter, 0.07 in Leaf Thickness, 2 in Door Leaf Length, 2 in Frame Leaf Length, Removable Pin, 0.19 in Diameter Pin, Surface, Wall Mounting, Fasteners: Screws, 2.11 in Overall Length, 5.38 in Overall Width, Hot Rolled Steel, Zinc Plated, For Residential Applications L-shaped door shoe used in conjunction with saddle thresholds. Seals between bottom of door and threshold to block out air and moisture. 3/8"H. 110 degree, full inset, frameless hinge.
M-D Ultra U-Shape Door Bottom with Vinyl Insert M-D 05991 Dual U-Shape Door Bottom M-D 06528 Dual U-Shape Door Bottom
U-shaped door shoe with rain drip and 1/2" vinyl insert. UL listed and fire labeled. 1-1/4"H. Durable U-shaped vinyl door bottom has soft vinyl fins to seal against top of threshold and sill. Ideal for steel doors. CDB 134 - fits most 1-3/4" steel or wood doors. 1-1/2"H. Durable U-shaped vinyl door bottom has soft vinyl fins to seal against top of threshold and sill. Ideal for steel doors. CDB 134 - fits most 1-3/4" steel or wood doors. 1-1/2"H.
M-D 82578 Dual L-Shape Door Bottom DOOR BOTTOM 36IN BEIGE DB370  M-D 43816 Dual L-Shape Door Bottom
Commercial, durable vinyl door bottom has soft vinyl fins to seal against top of threshold and sill. Designed to fit "Benchmark" style doors at 1-3/4" thickness. Ideal for steel doors. All season protection against drafts, moisture, dust and insects. With vinyl bulb and fins. Replaces many 1-3/4" pre-hung style door bottoms. Inserts into slots in bottom of door to provide a weathertight seal. Seals gaps up to 1/2-Inch high. Commercial, durable vinyl door bottom has soft vinyl fins to seal against top of threshold and sill. Designed to fit "Benchmark" style doors at 1-3/4" thickness. Ideal for steel doors.
DOOR BTM VINYL 35-3/4IN BEIGE M-D 05512 Concealed Door Bottom with Vinyl Seal Frost King W79/36H U-Shape Door Bottom
All season protection against drafts, moisture, dust and insects. Replaces many pre-hung pease style door bottoms. Inserts into slots in bottom of door to provide a weather tight seal. Seals gaps up to 1/2-Inch high. Fits Pease entry doors with slots on bottom of door. Concealed SDS extruded aluminum door bottom with vinyl seal. 7/16" height. For wood or steel doors. Includes screws. Seals out drafts, moisture, and dirt. 2"H. Fills gaps under doors up to 7/8".
M-D 06395 L-Shape Door Bottom Sweep with Drip Cap M-D 06056 L-Shape Door Bottom with Drip Cap PULL 3IN 76MM POLISH CHROME
L-shaped DCV 50 door bottom fits both 1-3/8" and 1-3/4" doors. Seals between bottom of door and threshold to block out air and moisture. Slotted fastener holes allow easy installation and adjustment. 1-3/32" height drip cap and 1/2" height door bottom. L-shaped DCV 50 door bottom fits both 1-3/8" and 1-3/4" doors. Seals between bottom of door and threshold to block out air and moisture. Slotted fastener holes allow easy installation and adjustment. 1-3/32" height drip cap and 1/2" height door bottom. Pull with 3" center, 4" length x 7/16" width x 3/4" height. Use with two #8-32 x 1" type screws.
Amerock Allison TEN174G10 Cabinet Pull Set Frost King B79/36H U-Shape Door Bottom PULL 3IN 76MM POLISHED BRASS
Transitional style pull with 3" center,  4-1/2 length  x 5/8" width  x 1" height. Use with two #8-32 x 1" type screws. For wood or steel doors. Includes screws. Seals out drafts, moisture, and dirt. 2"H. Fills gaps under doors up to 7/8". Pull with 3" center, 3.375" length x 0.312" width x 1.125" height. Use with two #8-32 x 1" type screws.
Frost King U37H U-Shape Drip Cap Door Bottom DOOR SEAL UNDER WHITE 36IN    DOOR SEAL UNDER BROWN 36IN
U-shaped drip cap door shoe used in conjunction with saddle thresholds. Seals between bottom of door and threshold to block out air and moisture. 3/8"H. Compression fit, holds firmly in place. Fits 1-3/4" thick doors up to 36" wide. 3 steps to install, measure-trim & slide on. Seals gaps up to 3/4". Compression fit, holds firmly in place. Fits 1-3/4" thick doors up to 36" wide. 3 steps to install, measure-trim & slide on. Seals gaps up to 3/4".
M-D Ultra U-Shape Door Bottom with Vinyl Insert Frost King UDB77 Slide-On Door Sweep M-D 06247 Drip Cap
U-shaped door shoe with rain drip and 1/2" vinyl insert. UL listed and fire labeled. 1-1/4"H. Seals bottom of door and blocks drafts. Diverts rainwater away from bottom of door. Slotted holes for easy adjustment. 1-1/2" Height.
M-D 48998 L-Shape Door Bottom M-D Ultra 69547 U-Shape Door Bottom with Vinyl Insert M-D Ultra U-Shape Door Bottom with Vinyl Insert
L-shaped DCV 50 door bottom fits both 1-3/8" and 1-3/4" doors. Seals between bottom of door and threshold to block out air and moisture. Slotted fastener holes allow easy installation and adjustment. 1-3/32" height drip cap and 1/2" height door bottom. U-shaped door shoe with rain drip and 1/2" vinyl insert. UL listed and fire labeled. 1-1/4"H. U-shaped door shoe with rain drip and 1/2" vinyl insert. UL listed and fire labeled. 1-1/4"H.
M-D Ultra 79996 Low Dome All Purpose Top Threshold M-D Ultra L-Shape Door Shoe with Vinyl Insert M-D 06155 U-Shape Door Bottom with Drip Cap
TH008 Ultra. Used to seal gaps at the bottom of doors. UL fire labeled. 5/8" Height. Fits 1-3/8" or 1-3/4" door. L-shaped door bottom with drip and 1/2" vinyl insert. UL listed and fire labeled. 1-1/4"H. U-shaped door bottom with drip cap. Seals between bottom of door and threshold to block out air and moisture. Slotted fastener holes allow easy installation and adjustment.
PULL 3IN 76MM SATIN NICKEL    M-D 6098 L-Shape Door Sweep M-D Ultra 69562 U-Shape Door Bottom with Vinyl Insert
Pull with 3" center, 5-1/16" length x 5/8" width x 1" height. Use with two #8-32 x 1" type screws. L-shaped DCV 50 door bottom fits both 1-3/8" and 1-3/4" doors. Seals between bottom of door and threshold to block out air and moisture. Slotted fastener holes allow easy installation and adjustment. 1-3/32" height drip cap and 1/2" height door bottom. U-shaped door shoe with rain drip and 1/2" vinyl insert. UL listed and fire labeled. 1-1/4"H.
M-D 06197 U-Shape Door Bottom Sweep with Drip Cap M-D 06403 U-Shape Door Bottom with Drip Cap M-D Ultra L-Shape Door Shoe with Vinyl Insert
U-shaped door bottom with drip cap. Seals between bottom of door and threshold to block out air and moisture. Slotted fastener holes allow easy installation and adjustment. U-shaped door bottom with drip cap. Seals between bottom of door and threshold to block out air and moisture. Slotted fastener holes allow easy installation and adjustment. Fits 1-3/8" or 1-3/4" door. L-shaped door bottom with drip and 1/2" vinyl insert. UL listed and fire labeled. 1-1/4"H.
M-D Ultra U-Shape Door Bottom with Vinyl Insert M-D 11783 Low Door Threshold PULL 3IN 76MM SATIN NICKEL
U-shaped door shoe with rain drip and 1/2" vinyl insert. UL listed and fire labeled. 1-1/4"H. Hardwood threshold with flexible vinyl seal provides an attractive seal to block out cold air. Can be painted or stained to match room trim. 1-1/8" Height. Pull with 3" center, 4" length x 7/16" width x 3/4" height. Use with two #8-32 x 1" type screws.
PULL 3IN 76MM OILRUB BRONZE   Amerock Allison TEN53003G10 Cabinet Pull Set M-D 06478 U-Shape Door Bottom Sweep with Drip Cap
3? Center-to-center. 1-1/4? projection, 3-3/8? length, 1/2? width. Transitional style, metal finishes collection. 3-3/4 in (96 mm) center-to-center pull. Includes mounting hardware: (Size(s):#8-32 x 1in Truss Head Machine Screw). U-shaped door bottom with drip cap. Seals between bottom of door and threshold to block out air and moisture. Slotted fastener holes allow easy installation and adjustment.
M-D 11767 High Threshold PULL 3-3/4IN OILRUB BRONZE    PULL 3-3/4IN 96MM SATIN NICKEL
Hardwood provides durable exterior residential threshold. Low thermal transfer coefficient of wood helps save energy. Can be painted or stained to match room trim. 1-1/16" Height. Transitional style, metal finishes collection. 3-3/4 in (96 mm) center-to-center pull. Includes mounting hardware: (Size(s):#8-32 x 1in Truss Head Machine Screw). Transitional style pull, 3-3/4? (96mm) mounting holes. 1? projection, 4-3/16? overall length, 19/13? width. Use with two #8-32 x 1" type screws.
M-D 11809 High Threshold with Replaceable Vinyl Seal Amerock Allison TEN174ORB Cabinet Pull Set Amerock Essential'Z TEN26201G10 Cabinet Pull Set
Hardwood exterior threshold with flexible vinyl seal provides an attractive seal to block out cold air. Can be painted or stained to match room trim. 1-7/16" Height. Transitional style pull with 3" center,  4-1/2 length  x 5/8" width  x 1" height. Use with two #8-32 x 1" type screws. Pull with 3" center, 5-1/4" length x 3/8" width x 1" height. Use with two #8-32 x 1" type screws.
M-D 68593 L-Shape Door Bottom M-D 05520 Replacement Threshold Insert DOOR BOTTOM/DRAFT STOP CLEAR
Extended door bottom with 1/2" vinyl insert. UL Listed and Fire Labeled. Vinyl replacement inserts increase the longevity and value of the door sweeps. Use for concealed aluminum door bottom.
   
 
1