Home > HARDWARE > GENERAL HARDWARE > HOME SECURITY & SAFETY > MISC SAFETY PRODUCTS
Choose a sub category:
GARAGE DOOR HARDWARE
Sort By:
1
Amerock BP34712G Flexgrip Friction Catch Amerock BP3473PT Magnet Catch Amerock BP347414 Double Roller Catch
Size: 1-5/16"L x 3/4"W x 5/8"H. Polybagged. Size: 2"L x 1-1/8"W x 1/2"H; Steel Strike: 1"L x 3/4"W x 1/16"H. Polybagged. Size: 1"L x 15/16"W x 1/2"H; steel strike: 1"L x 11/16"W x 3/8"H. Polybagged.
Amerock BP97143G Roller Catch Prime Line GD 12150 Extruded Cable Ferrule and Stop Prime Line GD 12149 Extruded Cable Ferrule and Stop
Polybagged. Designed for use with overhead garage door hardware. Ferrules used to clamp cable loops into fixed position while stops finish off cable ends or act as stopping points at any location on cable. Card contains 2 ferrules and 2 stops. Designed for use with overhead garage door hardware. Ferrules used to clamp cable loops into fixed position while stops finish off cable ends or act as stopping points at any location on cable. Card contains 2 ferrules and 2 stops.
Prime Line GD 12152 Extruded Cable Ferrule and Stop Prime Line GD 12151 Extruded Cable Ferrule and Stop Amerock BP98232G Spring Cushion Roller Catch
Designed for use with overhead garage door hardware. Ferrules used to clamp cable loops into fixed position while stops finish off cable ends or act as stopping points at any location on cable. Card contains 2 ferrules and 2 stops. Designed for use with overhead garage door hardware. Ferrules used to clamp cable loops into fixed position while stops finish off cable ends or act as stopping points at any location on cable. Card contains 2 ferrules and 2 stops. Size: 1-3/4"L x 1-1/4"W x 3/8"H. Polybagged.
Schlage 325A92 Double Pole Magnet Catch Prime Line GD 12153 Extruded Cable Ferrule and Stop Prime Line U 9047 Roller Catch
Case design allows easy magnet adjustment on cabinet or small door applications. Case size: 2-1/16" x 1-1/8" x 5/8". Packed with sheet metal screws. Slim-pak, polybagged. Designed for use with overhead garage door hardware. Ferrules used to clamp cable loops into fixed position while stops finish off cable ends or act as stopping points at any location on cable. Card contains 2 ferrules and 2 stops. 1-7/16"L plated steel housing and 1-3/4"W x 15/16"H strike with 3/4" spring loaded nylon roller, designed for use on interior closet and cabinet doors. With screws.
Amerock BP97653PT Magnet Catch with Offset Strike Mintcraft CH-590 Double Spring Cushion Roller Catch Amerock BP9783AL Magnet Catch
Size: 1-15/16"L x 11/16"W; Strike 1-1/8"L x 7/8"W x 3/4"H. Use (4) #6 T.H. x 1/2" screws and (1) #15 x 1/2" nail. Polybagged. With screws. Size: 2"L x 1"W x 5/8"H; Strike: 1-1/8"L x 3/4"H. Polybagged.
Amerock BP9798AW Magnet Catch Amerock BP32301BR Magnet Catch Schlage SP2A92 Cabinet Latch
Size: 2-1/32"L x 1-1/16"W x 13/16"H; Strike 1"L x 3/4"W. Polybagged. Inspires, coordinate and help express personal style. For the kitchen, bathroom and the rest of the home. 1-11/16"L x 2"W x 11/16"H. Polybagged. 1-3/8" x 5/8" Plate. 13/16" x 5/8" Strike. Polybagged.
Amerock BP33772AL Double Magnet Catch CATCH CABINET WHITE           CATCH CABINET WHITE
CABINET CATCHES WHT
Our Price: $4.00
CABINET CATCHES WHT
Our Price: $4.00
3-1/4"L x 1-1/8"W x 9/16"H (projection). Polybagged. Design allows magnet to pivot so that it will always center squarely on the metal strike for maximum holding strength. Offers sturdy, permanent magnet in a nylon case. Slotted screw holes are for ease of adjustment. Visual-pack. Design allows magnet to pivot so that it will always center squarely on the metal strike for maximum holding strength. Offers sturdy, permanent magnet in a nylon case. Slotted screw holes are for ease of adjustment. Visual-pack.
Prime Line GD 12154 Extruded Cable Ferrule and Stop CATCH BULLET BRASS 3/8IN      BOLT/NUT FLT-HD CARRIAGE 12PK
Designed for use with overhead garage door hardware. Ferrules used to clamp cable loops into fixed position while stops finish off cable ends or act as stopping points at any location on cable. Card contains 2 ferrules and 2 stops. National Hardware Bullet Catch, Series: V1845, 3/8 in Bore, Steel, Bright Brass, For Cabinets, Chests and Doors National Hardware Carriage Bolt and Nut, Series: V7652, 1/4-20 in Thread, Flat Head, 1-3/4 in Thread Length, Steel, Zinc Plated, Used With Wood or Steel Garage Doors
BOLT/NT RBD NK ZN 1/4IN-20X1/2 Prime Line GD 52109 Garage Door Pulley Prime Line GD52111 Convex Edge Door Roller
National Hardware Bolt and Nut, Series: V7653, 1/4-20 in Thread, 1/2 in Thread Length, Ribbed Neck, Steel, Zinc Plated, Used With Fiberglass Garage Doors Heavy-duty galvanized steel pulley used at stationary or spring positions. Galvanized steel strap and case hardened steel race with steel ball bearings. Factory lubricated. Includes pulley, strap, and axle bolt with nut. Used on side by side hinge placements for added strength. Factory lubricated, steel inner race with 10 ball bearings. Roller 1-7/8" O.D.
Prime Line GD 52130 Door Lift Handle Prime Line GD 52104 Standard Garage Door Hinge 3 in W Door Leaf Prime Line GD52110 Convex Edge Standard Door Roller
Replaces most handles currently in use. Galvanized steel construction. Use vertically or horizontally. Includes two 1/4"-20 x 1-7/8" pancake head carriage bolts with nuts. Used by most garage door manufacturers. Roller tube accepts a standard 7/16"OD stem roller. Made of 14 gauge galvanized steel, 3"W overall. Includes four 1/4"-20 x 1-7/8" pancake head carriage bolts with nuts. Factory lubricated, steel inner race. Fits 2" standard J-track. Roller 1-7/8" O.D.
Prime Line GD 52105 Standard Garage Door Hinge 3 in W Door Leaf Prime Line GD 52106 Standard Garage Door Hinge 3 in W Door Leaf ROLLER GARAGE DRSTL 3-1/2X7/16
Used by most garage door manufacturers. Roller tube accepts a standard 7/16"OD stem roller. Made of 14 gauge galvanized steel, 3"W overall. Includes four 1/4"-20 x 1-7/8" pancake head carriage bolts with nuts. Used by most garage door manufacturers. Roller tube accepts a standard 7/16"OD stem roller. Made of 14 gauge galvanized steel, 3"W overall. Includes four 1/4"-20 x 1-7/8" pancake head carriage bolts with nuts. High-impact plastic for good performance and quiet, trouble-free operation in all weather environments. Roller 1-7/8" O.D.
Prime Line GD52117 Adjustable Top Mount Roller Fixture National Hardware V7638 Lift Handle ROLLER LG STM HD PLN STL 1-7/8
Used on both wood and metal doors. Heavy-duty galvanized steel construction. Adjustable roller plate. Accepts a standard 7/16"OD stem roller. Includes four 1/4"-20 x 1-7/8" pancake head carriage bolts with nuts. National Hardware Lift Handle, Series: V7638, 7-1/4 in Length, Steel, Galvanized, BHMA A138.18 National Hardware Door Roller, Series: V7602, Heavy Duty, Long Stem, 1-7/8 in Roller Diameter, 0.44 in Roller Width, 10 Ball Bearing, 7-9/16 in Overall Length, Plain Steel, 7/16 in Shaft
BRACKET RLR BTM/TP GLV 2-1/2IN ROLLER STND PLN STL 1-7/8IN   HINGE HI-GALV 7-3/8IN
National Roller Bracket, Adjustable, Top Mount, 7/16 in Roller Shaft, Steel, Hot Dip Galvanized, Includes: Bolt and Nut, Class CD1832, Used On Overhead Sectional Wood and Steel Garage Doors National Hardware Door Roller, Series: V7601, Standard, 1-7/8 in Roller Diameter, 0.44 in Roller Width, 4.38 in Overall Length, Plain Steel, 7/16 in Shaft National Hardware Door Hinge, High, 7-3/8 in Overall Length, 14 ga Steel, Galvanized, BHMA A138.1, NO 1, For Metal and Wood Garage Doors
PULLEY GARAGE DOOR GALV 3IN   ROLLER STND PLN STL 1-3/4IN   HINGE HI-GALV 7-3/8IN
National Hardware Door Pulley, Series: N280, 0.56 in Bore, 3 in Outer Diameter, 3 in Sheave Width, 1 Grooves, 0.39 in Groove, Hook Mounting, Steel, Galvanized, Includes: Clevis Hook, Nut and Bolt, Standards: BHMA A138.18, Used On One Car Stretch Spring Door National Hardware Door Roller, Series: V7603, Standard, 1-3/4 in Roller Diameter, 0.31 in Roller Width, 4 in Overall Length, Plain Steel, 7/16 in Shaft National Hardware Door Hinge, High, 7-3/8 in Overall Length, 14 ga Steel, Galvanized, BHMA A138.1, NO 2, For Metal and Wood Garage Doors
HINGE HI-GALV 7-3/8IN         HINGE HI-GALV 7-3/8IN         Schlage BP3473PT Double Pole Magnet Catch
National Hardware Door Hinge, High, 7-3/8 in Overall Length, 14 ga Steel, Galvanized, BHMA A138.1, NO 3, For Metal and Wood Garage Doors National Hardware Door Hinge, High, 7-3/8 in Overall Length, 14 ga Steel, Galvanized, BHMA A138.1, NO 4, For Metal and Wood Garage Doors Can be surface mounted or mortised. Size: 3-1/8" x 1" x 9/16". Packed with installation instructions, sheet metal screws, and 2 short strikes. Slim-pack polybagged.
LOCK FOR SHFT ZN PLT 5/16IN SQ CATCH DOUBLE ROLLER ZINC 10PK ROLLER HD PLN STL 1-7/8IN
National Hardware Swivel Lock, Series: V7645, Suitable For Use With: 5/16 x 5/16 in Shaft, Steel, Zinc Plated, For Garage Door Polybagged. National Hardware Door Roller, Series: V7602, Heavy Duty, Suitable For Use With: Residential Garage Doors, 1-7/8 in Roller Diameter, 10 Ball Bearing, 4-3/8 in Overall Length, Plain Steel, 7/16 in Shaft
National Hardware V699 Traditional Cupboard Turn Stanley 100834 Door Bumper Prime Line GD52113 Convex Edge Door Roller
National Hardware Cupboard Turn, Series: V699, Traditional, Cold Rolled Steel, Brass, Includes: Screws, 1-1/4 X 1-3/4 in Size, For used to secure doors on wood cupboard and cabinets Designed for use as a door stop on up to 2" thick sliding doors. Embossed steel for added strength. Display packed. Factory lubricated, steel inner race. Fits 2" standard J-track. Roller 1-7/8" O.D.
Prime Line GD52212 Convex Edge Door Roller Prime Line GD 52101 Aircraft Cable Stanley BP34722G Double Magnet Catch
Short stem heavy-duty roller with steel inner race; 10 ball bearings. Contents: 2 roller assemblies. Roller 1-7/8" O.D. Galvanized carbon steel aircraft cable used on extension spring doors. 1/8" size replacement for most wood doors; 3/32" size for most fiberglass and aluminum doors. For pairs of cabinet doors or full size doors. Floating action magnet and pole piece assemblies pivot to allow for full contact with strikes. Impregnated magnet withstands rugged use. Slotted screw holes in case and off-center hole in strike for accurate and easy installation. Includes two 1-1/8" x 11/16" strikes and one 3-1/4" x 1-3/8" case. With fasteners.
Prime Line GD 52183 Aircraft Cable TORSION-LIFT GLV 8FT8X3/32IN  PULLEY GARAGE DOOR GALV 3IN
Galvanized carbon steel aircraft cable used on 7'H torsion spring doors. Visual-pack. National Hardware Door Pulley, Series: N280, 3 in Sheave Width, Steel, Galvanized, Includes: Fork, Axle Bolt and Nut, Standards: BHMA A138.18, For Residential Extension Spring Doors
Prime Line GD52114 Convex Edge Door Roller National Hardware V699 Traditional Cupboard Turn Prime Line GD52140 Convex Edge Standard Door Roller
Factory lubricated, steel inner race. Fits 2" standard J-track. Roller 1-7/8" O.D. National Hardware Cupboard Turn, Series: V699, Traditional, Cold Rolled Steel, Nickel Plated, Includes: Screws, 1-1/4 X 1-3/4 in Size, For used to secure doors on wood cupboard and cabinets Factory lubricated, steel inner race. Fits 2" standard J-track. Roller 1-7/8" O.D.
CYLINER D-BLT RIM KYD         LOCKS WIDE ZINC PLATED 5-1/2IN Prime Line GD 52197 Bottom Mount Lift Bracket
National Hardware Door Dead Bolt, Series: V7650, Rim Cylinder Pin, 3-1/8 in Overall Length, Steel, Aluminum, 2 in Length Shaft National Hardware Side Lock, Series: V7646, 5-1/2 in Overall Width, Steel, Zinc Plated Used on both wood and metal doors. Heavy-duty 13 gauge galvanized steel construction and steel cable pin. Accepts a standard 7/16"OD stem roller. Includes left and right hand brackets.
Prime Line GD 52100 Extension Spring/Cable 1/8 in OD x 12 ft L Stanley 100875 Adjustable Reversible Stay Roller LIFT BTM/RL BRKT 13G 5-11/16IN
Galvanized carbon steel aircraft cable used on extension spring doors. 1/8" size replacement for most wood doors; 3/32" size for most fiberglass and aluminum doors. Without screws. Each loose. National Hardware Bottom Lift and Roller Bracket, Series: V7626, Suitable For Use With: Wood or Metal Garage Doors, 5-11/16 in Length, 13 ga, Steel, Standards: BHMA A138.18
LOCKS WIDE ZINC PLATED 7-1/2IN CABL SPG EXT LFT GLV 12FTX3/32 Schlage BP32301BR Triple Pole Magnet Catch
National Hardware Side Lock, Series: V7647, 7-1/2 in Overall Width, Steel, Zinc Plated National Hardware Extension Spring Lift Cable, Series: N280, 3/32 in Cable Diameter, 12 ft Cable Length, Steel Cable, Galvanized Body Finish/Color, Standards: BHMA A138.18, For 7 ft Single or Double Wood or Metal Doors 2 sets of 3 magnets for strong hold. Can be surface mounted or mortised. Size: 3-1/8" x 1" x 3/4". Packed with installation instructions, sheet metal screws and 2 short strikes. Slim-pack polybagged.
Prime Line GD 52108 Garage Door Pulley TORSION-LIFT GLV 8FTX8INX1/8IN CABLE EXT SPRG SFTY 8FT8X1/8IN
Heavy-duty galvanized steel pulley used at stationary or spring positions. Galvanized steel strap and case hardened steel race with steel ball bearings. Factory lubricated. Includes pulley, strap, and axle bolt with nut. National Hardware Torsion Spring Lift Cable, Series: N280, 1/8 in Cable Diameter, 8 ft 8 in Cable Length, Steel Cable, Galvanized Body Finish/Color, Standards: BHMA A138.18, For 7 ft Single or Double Wood National Hardware Safety Cable, Series: N280, 1/8 in Cable Diameter, 8 ft 8 in Cable Length, Steel Cable, Galvanized Body Finish/Color, Includes: (2) Cables and (20 Quick Links, Standards: BHMA A138.18, For Garage Doors With 1 Extension Spring Per Side and For Single Spring Hookups
PULLEY GARAGE DOOR GALV 4IN   Prime Line GD 52138 Door Slide Lock Prime Line GD 52118 Inside Deadlock
National Hardware Door Pulley, Series: N280, 0.56 in Bore, 4-1/4 in Outer Diameter, 4 in Sheave Width, 1 Grooves, 0.71 in Groove, Hook Mounting, Steel, Galvanized, Includes: Spring Clevis Hook, Nut and Bolt, Standards: BHMA A138.18, Used On Double Car Doors Designed for use with No.GD-52147 outside lock and latch assembly. Galvanized steel, spring-loaded lock with latch bolt release lever. Works only from inside for extra protection as a night or vacation security lock. Fits most garage doors. Engages slot in vertical track. 7/8"W x 1/8" thick steel slide bolt with heavy-duty galvanized steel housing. Includes lock assembly and four 1/4"-20 x 1-7/8" pancake-head carriage bolts with nuts.
Prime Line GD 52139 Rim Cylinder Lock Prime Line GD 52102 Aircraft Safety Cable Set with Cable Clamps ROD WINDING 2PK
Used to key lock a variety of interior latching mechanisms. Heavy-duty zinc die-cast housing with brass face and 5-pin tumbler lock. Includes cylinder lock with trim ring, 2 keys, mounting plate, and 2 screws. Galvanized carbon steel aircraft cable installs through extension springs to prevent injury in case of breakage. Required on California installations. Use 4 cables for dual spring doors. National Hardware Torsion Winding Rod, Series: V7677, Suitable For Use With: Garage Torsion Springs, 1/2 in Dia x 16 in Length, Steel, Plain
ROLLER STND ZINC PLATED       CABLE SPG EXT LFT GLV 12FTX1/8 Prime Line GD 52238 Hard Drawn Wire Winding Rod
1-3/4" Nylon roller, 4-1/2" stem, 7/16" steel shaft. Visual-pack. National Hardware Extension Spring Lift Cable, Series: N280, 1/8 in Cable Diameter, 12 ft Cable Length, Steel Cable, Galvanized Body Finish/Color, Standards: BHMA A138.18, For 7 ft Single or Double Wood or Metal Doors Hard-drawn wire rods, the only tool used to wind and unwind tension on torsion springs.
SHAFT LOCK CHRM 5/16IN SQX4IN L-HNDL LOCK UNIV CHM          Stanley 131490 Adjustable Reversible Stay Roller
National Hardware Garage Door Handle, Series: V7640, 5.81 in Length, 1.33 in Width, Die-Cast Handle, Steel Shaft, Chrome Plated, 5/16 in Dia x 4 in Length Shaft, For Wood or Metal Garage Doors, Camper Tops and RVs National Hardware Locking L-Handle, Series: V7641, Universal, Suitable For Use With: Model 7645 Swivel Lock/7654 Snap Lock, Die-Cast Handle, Steel Shaft, Chrome, 5/16 sq-in x 3-11/16 in Shaft, For Wood or Metal Garage Doors, Camper Tops, RVs Designed for use as a heavy-duty guide on large, sliding doors up to 3-3/4" thick. Slots in frame provide adjustment for holding doors against wood walls or posts. Delrin wheel is reversible; it can be used either side of frame. Offers sturdy steel frame construction. Meets ANSI/BHMA A 156.14. Roller is adjustable. Includes nail and lag screw holes. Hardened steel bolt for greater strength. Display packed
T-HNDL BLANK 5/16 SQX3IN CHRM LOCKS ALUMINUM                Stanley 162297 Single Adjustable Door Stop
280-602 BLANK T-HANDLE
Our Price: $12.24
LOCKS ALUMINUM
Our Price: $12.76
National Hardware Blank T-Handle, Series: V7639, Die-Cast Handle, Steel Shaft, Chrome Plated, Includes: (1) 1/8 in Dia x 5/8 in Length Knurled Pin, (2) 2 Push Retainer For 0.309 sq Shaft, (3) Flat Washer 7/16 in ID and (4) NO 7 x 1 Oval Head Slotted Screws, 5/16 in Dia x 3 in Length Shaft National Hardware Dead Bolt Lock, Series: V7651, 2 Keys, Steel, Aluminum, Includes: (2) Keys, (4) NO 8 x 5/8 Pan Head Phillips Wood Screws, For Wood or Metal Garage Doors Designed to engage the bottom of a single TAB-LOC door in either the open or closed position to hold firm against the building. For bi-parting doors stop engages in the open position only, also used on wood frame doors using #6061 or #6062 continuous bottom guides. Slotted holes in each leg allow both lateral and vertical adjustments. Bolt, nut, and washer are included for easy attachment. Boxed.
Prime Line GD 52121 Door T Handle SHAFT LOCK CHRM 5/16SQX3-3/4IN Prime Line GD 52122 Door T Handle Lock
Used when locking cylinder is mounted separately. 1-1/2" hole centers. Includes 1 die-cast outside handle with 5/16" square x 3"L shaft, and 1 die-cast zinc inside handle with set screw. National Hardware Locking T-Handle, Series: V7643, Suitable For Use With: Model 7645 Swivel Lock/7654 Snap Lock, 2 Keys, Die Cast Handle, Steel Shaft, Chrome, Includes: (2) NO 10 x 3/4 Phillips Pan Head Machine Screws and (1) Retainer Washer, 5/16 sq-in x 3-3/4 in Shaft, For Metal or Fiberglass Doors 5/16" square shaft, 3"L, replaces most garage door, camper and RV locking handles. Zinc die-cast construction. 1-1/2" hole centers. Includes locking handle and 2 chrome plated solid brass keys.
Stanley 131706 Single Adjustable Door Guide Prime Line GD 12191 Extension Spring 25 in L Prime Line GD 52123 Door Handle Lock
Extra-wide guides are designed for corrugated metal-clad doors, can be used as a door stop when mounted sideways. Curved section of guide may be turned sideways allowing straight access when installing screws. Fasteners are not included. Guides have holes for spikes as well as larger holes for 3/8" lag screw mounting. Guide is adjustable for doors up to 5-1/2" thick. For use on sectional, overhead, wood doors 8'W x up to 6'6"H, 2 panel/4 section; or fiberglass doors 16'W x up to 7'H, 4 section. Use two 110lb springs for each 110lb door (1 on each side). Rated at 10,000 cycles. Includes safety cable, which protects against personal injury and property damage from broken springs. Color-coded and shrink-wrapped for selection ease. Polybagged. 5/16" square shaft, 2-7/8"L, replaces most garage door, camper and RV locking handles. Zinc die-cast construction. 1-3/4" hole centers. Includes locking handle and 2 chrome plated solid brass keys.
Prime Line GD52169 Door T Handle Lock Prime Line GD 52119 Deadbolt HANDLE OTSD LOCK
Zinc diecast construction; keyed lock; 5/16" square shaft, 4-5/8" long, 1-1/2" hole centers; replaces many garage door, camper and R.V. locking handles. Screws attach to lock from the inside of door. Contents: 1 locking handle; 2 keys. Used by many manufacturers; will replace most locking mechanisms of this type. Painted die-cast inside lock with heavy-duty steel spring bolt. Key cylinder has aluminum face and 5-pin tumbler lock with cylinder ring. National Hardware Outside Locking Handle, Series: V7642, 7-1/2 in Overall Length, Die-Cast Handle, Steel Shaft, Chrome, 5/16 in Dia x 3-1/4 in Length Shaft
Prime Line GD 12192 Extension Spring 25 in L EXTENSION BLACK 110LBX25IN    Stanley 160481 Guide Rail
EXTENSION 25X110# BLK
Our Price: $18.44
For use on sectional, overhead, wood doors 8'W x up to 7'H, 2 panel/4 section; or fiberglass doors 16'W x up to 7'H, 4 section. Use two 120lb springs for each 120lb door (1 on each side). Rated at 10,000 cycles. Includes safety cable, which protects against personal injury and property damage from broken springs. Color-coded and shrink-wrapped for selection ease. Polybagged. National Hardware Extension Spring, Series: 7688, 25 in Nominal, 110 lb Load Capacity, Steel, Black, For 7 ft High Garage Doors Designed to engage the bottom lateral of TAB-LOC doors to hold door firmly in place and prevent wind damage to both the door and building. Fastens to building using #6005 Guide Rail Brackets. Also used with #6061 or #6062 continuous bottom guides. Includes pre-punched mounting holes to attach #6005 guide rail brackets. Pack loose.
Prime Line GD 12202 Extension Spring 25 in L EXTENSION BLACK 120LBX25IN    EXTENSION BLACK 130LBX25IN
EXTENSION 25X120# BLK
Our Price: $19.26
EXTENSION 25X130# BLK
Our Price: $19.74
For use on sectional, overhead, single car fiberglass doors. Use two 70lb springs for each 70lb door (1 on each side). Rated at 10,000 cycles. Includes safety cable, which protects against personal injury and property damage from broken springs. Color-coded and shrink-wrapped for selection ease. Polybagged. Color: Black. Boxed. National Hardware Extension Spring, Series: 7690, 25 in Nominal, 130 lb Load Capacity, Steel, Black, For 7 ft High Garage Doors
Prime Line GD 12194 Extension Spring 25 in L EXTENSION BLACK 140LBX25IN    EXTENSION BLACK 150LBX25IN
EXTENSION 25X140# BLK
Our Price: $21.06
EXTENSION 25X150# BLK
Our Price: $21.33
For use on sectional, overhead, wood doors 9'W x up to 7'H, 2 panel/4 section; or wood doors 16'W x up to 7'H, 2 panel/4 section. Use two 140lb springs for each 9'W 140lb door (1 each side); use 4 springs for each 16'W 140lb door (2 on each side). Rated at 10,000 cycles. Includes safety cable, which protects against personal injury and property damage from broken springs. Color-coded and shrink-wrapped for selection ease. Polybagged. National Hardware Extension Spring, Series: 7690, 25 in Nominal, 140 lb Load Capacity, Steel, Black, For 7 ft High Garage Doors National Hardware Extension Spring, Series: 7690, 25 in Nominal, 150 lb Load Capacity, Steel, Black, For 7 ft High Garage Doors
EXTENSION BLACK 150LBX25IN    Prime Line GD52142 Carded Electric Key Lock Switch EXTENSION BLACK 160LBX25IN
EXTENSION 22X150# BLK
Our Price: $21.33
EXTENSION 25X160# BLK
Our Price: $23.38
National Hardware Extension Spring, Series: 7691, 22 in Nominal, 150 lb Load Capacity, Steel, Black, For 7 ft High Garage Doors Allows operation of garage door opener without a transmitter; mount to the exterior door jamb and hard wire to opener. Contents: 1 key cylinder with plastic housing and face plate assembly; 2 keys. National Hardware Extension Spring, Series: 7690, 25 in Nominal, 160 lb Load Capacity, Steel, Black, For 7 ft High Garage Doors
Master Lock 265DCCSEN Dual-Function Security Bar Prime Line GD 12205 Extension Spring 25 in L Prime Line GD 12193 Extension Spring 25 in L
For hinged and sliding doors. Made of rugged 20 gauge steel construction to resists forced entry through doors and sliding patio doors. The bar adjusts from 27-1/2in (70cm) - 42in (1.1m) for application flexibility. The pivoting ball joint assures full contact with floor, and padded foot provides sure grip without scratching. Withstands over 350 pounds of force. For use on sectional, overhead, wood doors 9'W x 7'H, 4 panel/4 section; or wood doors 16'W x 7'H, 4 panel/4 section. Use two 160lb springs for each 9'W 160lb door (one each side); use four springs for each 16'W 160lb door (2 on each side). Rated at 10,000 cycles. Includes safety cable, which protects against personal injury and property damage from broken springs. Color-coded and shrink-wrapped for selection ease. Polybagged. For use on sectional, overhead, wood doors 8'W x up to 7'H, 4 panel/4 section. Use two 130lb springs for each 130lb door (1 on each side). Rated at 10,000 cycles. Includes safety cable, which protects against personal injury and property damage from broken springs. Color-coded and shrink-wrapped for selection ease. Polybagged.
Stanley 160499 Guide Rail Prime Line GD 12207 Extension Spring 22 in L Prime Line GD 12195 Extension Spring 25 in L
Designed to engage the bottom lateral of TAB-LOC doors to hold door firmly in place and prevent wind damage to both the door and building. Fastens to building using #6005 Guide Rail Brackets. Also used with #6061 or #6062 continuous bottom guides. Includes pre-punched mounting holes to attach #6005 guide rail brackets. Pack loose. For use on sectional, overhead doors 9'W x 7'H, 4 panel/4 section; or doors 16'W x 7'H, 4 panel/4 section. Use two 150lb springs for each 9'W 150lb door (1 each side); use 4 springs for each 16'W 150lb door (2 on each side). Rated at 10,000 cycles. Includes safety cable, which protects against personal injury and property damage from broken springs. Color-coded and shrink-wrapped for selection ease. FOR FRANTZ DOORS. Polybagged. For use on sectional, overhead, wood doors 9'W x 7'H, 4 panel/4 section; or wood doors 16'W x 7'H, 4 panel/4 section. Use two 150lb springs for each 9'W 150lb door (1 each side); use 4 springs for each 16'W 150lb door (2 on each side). Rated at 10,000 cycles. Includes safety cable, which protects against personal injury and property damage from broken springs. Color-coded and shrink-wrapped for selection ease. Polybagged.
Stanley 160507 Guide Rail Stanley 173708 Guide Rail Bracket First Alert EL52-2 Emergency Fire Escape Ladder
Designed to engage the bottom lateral of TAB-LOC doors to hold door firmly in place and prevent wind damage to both the door and building. Fastens to building using #6005 Guide Rail Brackets. Also used with #6061 or #6062 continuous bottom guides. Includes pre-punched mounting holes to attach #6005 guide rail brackets. Pack loose. Designed to attach #6004 guide rail. Slotted hole in each leg allows for both lateral and vertical adjustments. Bolts, nuts and washers are included for easy attachment. Two-story 15 foot long fully assembled escape ladder. Strong steel construction Large hooks secure easily to windowsills. Slip-resistant epoxy coated rungs. 1000 pound overall strength, 350 pound individual rung strength.
Stanley 184390 Astragal Rail SPRING TRSN LW PLN STL        SPRING TRSN RW PLN STL
Designed to cover the gap between bi-parting doors. Design allows it to wrap around the flashing channel of the vertical. Fits both TAB-LOC and EASY-FRAME door verticals and attaches with pop rivets. Can be installed before or after doors are hung. Boxed. Boxed. Boxed.
Stanley 131565 Adjustable Door Guide Stanley 264879 Astragal Rail Prime Line GD 12233 Torsion Spring
Designed for single sliding or bi-parting metal or wood doors. Intended to take abuse from trucks, tractors and farm machinery when used around factory and farm buildings. Smooth ramp on each side of the guide prevents cutting tractor or truck tires. Mounts on concrete floors with lag screws and shields or on a 6" x 6" post. 1/2" rod or bolt inserted through hole in each side will serve as a center stop for bi-parting doors. Meets ANSI/BHMA, A 156.14. Manufactured from hot-rolled steel. Boxed. Designed to cover the gap between bi-parting doors. Design allows it to wrap around the flashing channel of the vertical. Fits both TAB-LOC and EASY-FRAME door verticals and attaches with pop rivets. Can be installed before or after doors are hung. Boxed. Use to replace torsion springs. Mounts to header directly above door. Requires 2 winding rods (No.52238 sold separately). Includes spring with winding cone and anchor cone attached. Color-coded for selection ease.
Prime Line GD 12232 Torsion Spring SPRING LFT-WD TRSN 1-3/4X32IN SPRING RGT-WD TRSN 1-3/4X32IN
Use to replace torsion springs. Mounts to header directly above door. Requires 2 winding rods (No.52238 sold separately). Includes spring with winding cone and anchor cone attached. Color-coded for selection ease. National Hardware Torsion Spring, Series: 7680, Left Wind, 1-3/4 in Inside Diameter, 0.243 in Wire, 32 in Overall Length, Steel, Plain, For Residential Garage Doors National Hardware Torsion Spring, Series: 7681, Right Wind, 1-3/4 in Inside Diameter, 0.243 in Wire, 32 in Overall Length, Steel, Plain, For Residential Garage Doors
Stanley 184408 Astragal Rail SPRING LFT-WD TRSN 2INX32IN   SPRING RGT-WD TRSN 2INX32IN
Designed to cover the gap between bi-parting doors. Design allows it to wrap around the flashing channel of the vertical. Fits both TAB-LOC and EASY-FRAME door verticals and attaches with pop rivets. Can be installed before or after doors are hung. Boxed. National Hardware Torsion Spring, Series: 7682, Left Wind, 2 in Inside Diameter, 1/4 in Wire, 32 in Overall Length, Steel, Plain, For Residential Garage Doors National Hardware Torsion Spring, Series: 7683, Right Wind, 2 in Inside Diameter, 1/4 in Wire, 32 in Overall Length, Steel, Plain, For Residential Garage Doors
SPRING TRSN LW PLN STL        SPRING TRSN RW PLN STL        Stanley 184416 Astragal Rail
Boxed. Boxed. Designed to cover the gap between bi-parting doors. Design allows it to wrap around the flashing channel of the vertical. Fits both TAB-LOC and EASY-FRAME door verticals and attaches with pop rivets. Can be installed before or after doors are hung. Boxed.
Stanley 131458 Adjustable Door Bumper Easy Frame 175661 Vertical Door Frame Stanley 161448 Bottom Mount Door Guide
Adjustable 2-1/2" to 3-1/8". Pack Loose. For 1-1/2" Steel / Wood Lateral Doors. Ln Loose. Designed for use on 1-1/2" thick wood frame sliding doors. When nailed to the bottom of a wood frame door, these guides engage with #6004 guide rail to prevent wind damage to both the door and building. Pre-punched mounting brackets are attached. Pack loose.
Easy Frame 175687 Vertical Door Frame Stanley 161455 Bottom Mount Door Guide Easy Frame 175703 Vertical Door Frame
For 1-1/2" Steel / Wood Lateral Doors. Ln Loose. Designed for use on 1-1/2" thick wood frame sliding doors. When nailed to the bottom of a wood frame door, these guides engage with #6004 guide rail to prevent wind damage to both the door and building. Pre-punched mounting brackets are attached. Pack loose. For 1-1/2" Steel / Wood Lateral Doors. Ln Loose.
Easy Frame 175729 Vertical Door Frame Stanley 161463 Bottom Mount Door Guide Easy Frame 175745 Vertical Door Frame
For 1-1/2" Steel / Wood Lateral Doors. Ln Loose. Designed for use on 1-1/2" thick wood frame sliding doors. When nailed to the bottom of a wood frame door, these guides engage with #6004 guide rail to prevent wind damage to both the door and building. Pre-punched mounting brackets are attached. Pack loose. For 1-1/2" Steel / Wood Lateral Doors. Ln Loose.
Stanley 161471 Bottom Mount Door Guide
Designed for use on 1-1/2" thick wood frame sliding doors. When nailed to the bottom of a wood frame door, these guides engage with #6004 guide rail to prevent wind damage to both the door and building. Pre-punched mounting brackets are attached. Pack loose.
   
 
1