Home > HARDWARE > GENERAL HARDWARE > HOME SECURITY & SAFETY > SAFETY GATES/PORCH GATES
Sort By:
1
Prime Line GD 12150 Extruded Cable Ferrule and Stop Prime Line GD 12149 Extruded Cable Ferrule and Stop Prime Line GD 12152 Extruded Cable Ferrule and Stop
Designed for use with overhead garage door hardware. Ferrules used to clamp cable loops into fixed position while stops finish off cable ends or act as stopping points at any location on cable. Card contains 2 ferrules and 2 stops. Designed for use with overhead garage door hardware. Ferrules used to clamp cable loops into fixed position while stops finish off cable ends or act as stopping points at any location on cable. Card contains 2 ferrules and 2 stops. Designed for use with overhead garage door hardware. Ferrules used to clamp cable loops into fixed position while stops finish off cable ends or act as stopping points at any location on cable. Card contains 2 ferrules and 2 stops.
Prime Line GD 12151 Extruded Cable Ferrule and Stop Prime Line GD 12153 Extruded Cable Ferrule and Stop Stanley 193839 Round Rail Track End Cap
Designed for use with overhead garage door hardware. Ferrules used to clamp cable loops into fixed position while stops finish off cable ends or act as stopping points at any location on cable. Card contains 2 ferrules and 2 stops. Designed for use with overhead garage door hardware. Ferrules used to clamp cable loops into fixed position while stops finish off cable ends or act as stopping points at any location on cable. Card contains 2 ferrules and 2 stops. With  bolt, nut and washer. Pack loose.
Prime Line GD 12154 Extruded Cable Ferrule and Stop BOLT/NUT FLT-HD CARRIAGE 12PK BOLT/NT RBD NK ZN 1/4IN-20X1/2
Designed for use with overhead garage door hardware. Ferrules used to clamp cable loops into fixed position while stops finish off cable ends or act as stopping points at any location on cable. Card contains 2 ferrules and 2 stops. National Hardware Carriage Bolt and Nut, Series: V7652, 1/4-20 in Thread, Flat Head, 1-3/4 in Thread Length, Steel, Zinc Plated, Used With Wood or Steel Garage Doors National Hardware Bolt and Nut, Series: V7653, 1/4-20 in Thread, 1/2 in Thread Length, Ribbed Neck, Steel, Zinc Plated, Used With Fiberglass Garage Doors
Prime Line GD 52109 Garage Door Pulley National Hardware V6 Extra Heavy Door Pull Prime Line GD52111 Convex Edge Door Roller
Heavy-duty galvanized steel pulley used at stationary or spring positions. Galvanized steel strap and case hardened steel race with steel ball bearings. Factory lubricated. Includes pulley, strap, and axle bolt with nut. National Hardware Door Pull, Extra Heavy, Series: V6, Suitable For Use With: Metal and Wood Doors, 6-3/4 in Length, 1.38 in Width, 1.82 in Depth, Steel, Zinc Plated Used on side by side hinge placements for added strength. Factory lubricated, steel inner race with 10 ball bearings. Roller 1-7/8" O.D.
Prime Line GD 52130 Door Lift Handle Stanley 235309 Open Bar Holder Prime Line GD 52104 Standard Garage Door Hinge 3 in W Door Leaf
Replaces most handles currently in use. Galvanized steel construction. Use vertically or horizontally. Includes two 1/4"-20 x 1-7/8" pancake head carriage bolts with nuts. Used to reinforce doorways against forced entry by providing secure placement of 2x4 lumber against entry side of door. 2x4 must be slid through the  bar holders. Clearance for 1/4" bolts. Manufactured from hot rolled steel. Used by most garage door manufacturers. Roller tube accepts a standard 7/16"OD stem roller. Made of 14 gauge galvanized steel, 3"W overall. Includes four 1/4"-20 x 1-7/8" pancake head carriage bolts with nuts.
Prime Line GD52110 Convex Edge Standard Door Roller Prime Line GD 52105 Standard Garage Door Hinge 3 in W Door Leaf Prime Line GD 52106 Standard Garage Door Hinge 3 in W Door Leaf
Factory lubricated, steel inner race. Fits 2" standard J-track. Roller 1-7/8" O.D. Used by most garage door manufacturers. Roller tube accepts a standard 7/16"OD stem roller. Made of 14 gauge galvanized steel, 3"W overall. Includes four 1/4"-20 x 1-7/8" pancake head carriage bolts with nuts. Used by most garage door manufacturers. Roller tube accepts a standard 7/16"OD stem roller. Made of 14 gauge galvanized steel, 3"W overall. Includes four 1/4"-20 x 1-7/8" pancake head carriage bolts with nuts.
ROLLER GARAGE DRSTL 3-1/2X7/16 Prime Line GD52117 Adjustable Top Mount Roller Fixture National Hardware V7638 Lift Handle
High-impact plastic for good performance and quiet, trouble-free operation in all weather environments. Roller 1-7/8" O.D. Used on both wood and metal doors. Heavy-duty galvanized steel construction. Adjustable roller plate. Accepts a standard 7/16"OD stem roller. Includes four 1/4"-20 x 1-7/8" pancake head carriage bolts with nuts. National Hardware Lift Handle, Series: V7638, 7-1/4 in Length, Steel, Galvanized, BHMA A138.18
ROLLER LG STM HD PLN STL 1-7/8 BRACKET RLR BTM/TP GLV 2-1/2IN ROLLER STND PLN STL 1-7/8IN
National Hardware Door Roller, Series: V7602, Heavy Duty, Long Stem, 1-7/8 in Roller Diameter, 0.44 in Roller Width, 10 Ball Bearing, 7-9/16 in Overall Length, Plain Steel, 7/16 in Shaft National Roller Bracket, Adjustable, Top Mount, 7/16 in Roller Shaft, Steel, Hot Dip Galvanized, Includes: Bolt and Nut, Class CD1832, Used On Overhead Sectional Wood and Steel Garage Doors National Hardware Door Roller, Series: V7601, Standard, 1-7/8 in Roller Diameter, 0.44 in Roller Width, 4.38 in Overall Length, Plain Steel, 7/16 in Shaft
HINGE HI-GALV 7-3/8IN         Stanley 351503 Open Bar Holder PULLEY GARAGE DOOR GALV 3IN
National Hardware Door Hinge, High, 7-3/8 in Overall Length, 14 ga Steel, Galvanized, BHMA A138.1, NO 1, For Metal and Wood Garage Doors Used to reinforce doorways against forced entry by providing secure placement of 2x4 lumber against entry side of door. 2x4 must be slid through the  bar holders. Clearance for 1/4" bolts. Manufactured from hot rolled steel. National Hardware Door Pulley, Series: N280, 0.56 in Bore, 3 in Outer Diameter, 3 in Sheave Width, 1 Grooves, 0.39 in Groove, Hook Mounting, Steel, Galvanized, Includes: Clevis Hook, Nut and Bolt, Standards: BHMA A138.18, Used On One Car Stretch Spring Door
ROLLER STND PLN STL 1-3/4IN   HINGE HI-GALV 7-3/8IN         Stanley 235291 Closed Bar Holder
National Hardware Door Roller, Series: V7603, Standard, 1-3/4 in Roller Diameter, 0.31 in Roller Width, 4 in Overall Length, Plain Steel, 7/16 in Shaft National Hardware Door Hinge, High, 7-3/8 in Overall Length, 14 ga Steel, Galvanized, BHMA A138.1, NO 2, For Metal and Wood Garage Doors Used to reinforce doorways against forced entry by providing secure placement of 2x4 lumber against entry side of door. 2x4 must be slid through the  bar holders. Clearance for 1/4" bolts. Manufactured from hot rolled steel.
HINGE HI-GALV 7-3/8IN         National Hardware V6 Extra Heavy Door Pull Stanley 351502 Closed Bar Holder
DOOR PULLS 6-3/4IN BLK
Our Price: $6.08
National Hardware Door Hinge, High, 7-3/8 in Overall Length, 14 ga Steel, Galvanized, BHMA A138.1, NO 3, For Metal and Wood Garage Doors National Hardware Door Pull, Extra Heavy, Series: V6, Suitable For Use With: Metal and Wood Doors, 6-3/4 in Length, 1.38 in Width, 1.82 in Depth, Steel, Black Used to reinforce doorways against forced entry by providing secure placement of 2x4 lumber against entry side of door. 2x4 must be slid through the  bar holders. Clearance for 1/4" bolts. Manufactured from hot rolled steel.
HINGE HI-GALV 7-3/8IN         LOCK FOR SHFT ZN PLT 5/16IN SQ ROLLER HD PLN STL 1-7/8IN
National Hardware Door Hinge, High, 7-3/8 in Overall Length, 14 ga Steel, Galvanized, BHMA A138.1, NO 4, For Metal and Wood Garage Doors National Hardware Swivel Lock, Series: V7645, Suitable For Use With: 5/16 x 5/16 in Shaft, Steel, Zinc Plated, For Garage Door National Hardware Door Roller, Series: V7602, Heavy Duty, Suitable For Use With: Residential Garage Doors, 1-7/8 in Roller Diameter, 10 Ball Bearing, 4-3/8 in Overall Length, Plain Steel, 7/16 in Shaft
Stanley 51L2 Double Triangle Bracket Stanley 100834 Door Bumper PULL DOOR GALV 6-3/4IN
DOOR PULLS 6-3/4IN GALV
Our Price: $7.73
Designed to support double run of #5114 or #5116 box rail. Suitable for use on corrugated metal siding due to narrow surface. Does not come with rail bracket or fasteners. Can be used as double stop when used with #6008 door stop. 300 lb. safe working load. Designed for use as a door stop on up to 2" thick sliding doors. Embossed steel for added strength. Display packed. National Hardware Door Pull, Series: V6, Extra Heavy, Suitable For Use With: Metal or Wood Doors, 0.29 in Diameter, 6-3/4 in Length, 1.38 in Width, 1.82 in Depth, 0.1 in Plate, Steel, Galvanized, Standards: BHMA A138.18
Prime Line GD52113 Convex Edge Door Roller Prime Line GD52212 Convex Edge Door Roller Prime Line GD 52101 Aircraft Cable
Factory lubricated, steel inner race. Fits 2" standard J-track. Roller 1-7/8" O.D. Short stem heavy-duty roller with steel inner race; 10 ball bearings. Contents: 2 roller assemblies. Roller 1-7/8" O.D. Galvanized carbon steel aircraft cable used on extension spring doors. 1/8" size replacement for most wood doors; 3/32" size for most fiberglass and aluminum doors.
Prime Line GD 52183 Aircraft Cable TORSION-LIFT GLV 8FT8X3/32IN  PULLEY GARAGE DOOR GALV 3IN
Galvanized carbon steel aircraft cable used on 7'H torsion spring doors. Visual-pack. National Hardware Door Pulley, Series: N280, 3 in Sheave Width, Steel, Galvanized, Includes: Fork, Axle Bolt and Nut, Standards: BHMA A138.18, For Residential Extension Spring Doors
Prime Line GD52114 Convex Edge Door Roller Prime Line GD52140 Convex Edge Standard Door Roller CYLINER D-BLT RIM KYD
Factory lubricated, steel inner race. Fits 2" standard J-track. Roller 1-7/8" O.D. Factory lubricated, steel inner race. Fits 2" standard J-track. Roller 1-7/8" O.D. National Hardware Door Dead Bolt, Series: V7650, Rim Cylinder Pin, 3-1/8 in Overall Length, Steel, Aluminum, 2 in Length Shaft
LOCKS WIDE ZINC PLATED 5-1/2IN Prime Line GD 52197 Bottom Mount Lift Bracket National Hardware V6 Extra Heavy Door Pull
National Hardware Side Lock, Series: V7646, 5-1/2 in Overall Width, Steel, Zinc Plated Used on both wood and metal doors. Heavy-duty 13 gauge galvanized steel construction and steel cable pin. Accepts a standard 7/16"OD stem roller. Includes left and right hand brackets. National Hardware Door Pull, Extra Heavy, Series: V6, Suitable For Use With: Metal and Wood Doors, 6-3/4 in Length, 1.38 in Width, 1.82 in Depth, Steel, White, Vinyl Coated
Prime Line GD 52100 Extension Spring/Cable 1/8 in OD x 12 ft L Stanley 104331 Single Side Bracket Stanley 100875 Adjustable Reversible Stay Roller
BOX RAIL BRACKETS GALV
Our Price: $9.39
Galvanized carbon steel aircraft cable used on extension spring doors. 1/8" size replacement for most wood doors; 3/32" size for most fiberglass and aluminum doors. Designed as a support bracket for Stanley's 105270, 105676, 105213, and 105726 box rail at 24" OC intervals. Includes lags. Display packed. Without screws. Each loose.
LIFT BTM/RL BRKT 13G 5-11/16IN LOCKS WIDE ZINC PLATED 7-1/2IN CABL SPG EXT LFT GLV 12FTX3/32
National Hardware Bottom Lift and Roller Bracket, Series: V7626, Suitable For Use With: Wood or Metal Garage Doors, 5-11/16 in Length, 13 ga, Steel, Standards: BHMA A138.18 National Hardware Side Lock, Series: V7647, 7-1/2 in Overall Width, Steel, Zinc Plated National Hardware Extension Spring Lift Cable, Series: N280, 3/32 in Cable Diameter, 12 ft Cable Length, Steel Cable, Galvanized Body Finish/Color, Standards: BHMA A138.18, For 7 ft Single or Double Wood or Metal Doors
Prime Line GD 52108 Garage Door Pulley TORSION-LIFT GLV 8FTX8INX1/8IN CABLE EXT SPRG SFTY 8FT8X1/8IN
Heavy-duty galvanized steel pulley used at stationary or spring positions. Galvanized steel strap and case hardened steel race with steel ball bearings. Factory lubricated. Includes pulley, strap, and axle bolt with nut. National Hardware Torsion Spring Lift Cable, Series: N280, 1/8 in Cable Diameter, 8 ft 8 in Cable Length, Steel Cable, Galvanized Body Finish/Color, Standards: BHMA A138.18, For 7 ft Single or Double Wood National Hardware Safety Cable, Series: N280, 1/8 in Cable Diameter, 8 ft 8 in Cable Length, Steel Cable, Galvanized Body Finish/Color, Includes: (2) Cables and (20 Quick Links, Standards: BHMA A138.18, For Garage Doors With 1 Extension Spring Per Side and For Single Spring Hookups
PULLEY GARAGE DOOR GALV 4IN   Stanley DP5421BC Single Round Rail Splice Bracket BRACKET BOX RAIL ZINC
BOX RAIL BRACKETS ZINC
Our Price: $10.00
National Hardware Door Pulley, Series: N280, 0.56 in Bore, 4-1/4 in Outer Diameter, 4 in Sheave Width, 1 Grooves, 0.71 in Groove, Hook Mounting, Steel, Galvanized, Includes: Spring Clevis Hook, Nut and Bolt, Standards: BHMA A138.18, Used On Double Car Doors Designed to be used with #5400 round rail to join and hold two lengths of rail together. Includes lag bolt and spice screws. Splice screws are inserted in holes at the end of round rail. Safe working load 300 lbs. Designed to join #5114 or #5116 box rail. Brackets can be installed on a 2 x 6 header board. Offset nail holes for quick placement. Compatible with 5438 & 5439 snap-on flashing brackets. Includes lag bolt and spice screws. Splice screws are inserted in holes at the end of rail. One splice bracket should be installed on every length of rail to lock it in place. Pack loose.
Prime Line GD 52138 Door Slide Lock Prime Line GD 52118 Inside Deadlock Prime Line GD 52139 Rim Cylinder Lock
Designed for use with No.GD-52147 outside lock and latch assembly. Galvanized steel, spring-loaded lock with latch bolt release lever. Works only from inside for extra protection as a night or vacation security lock. Fits most garage doors. Engages slot in vertical track. 7/8"W x 1/8" thick steel slide bolt with heavy-duty galvanized steel housing. Includes lock assembly and four 1/4"-20 x 1-7/8" pancake-head carriage bolts with nuts. Used to key lock a variety of interior latching mechanisms. Heavy-duty zinc die-cast housing with brass face and 5-pin tumbler lock. Includes cylinder lock with trim ring, 2 keys, mounting plate, and 2 screws.
Prime Line GD 52102 Aircraft Safety Cable Set with Cable Clamps ROD WINDING 2PK               First Alert/Brk Brands MT1 Test Kits
Galvanized carbon steel aircraft cable installs through extension springs to prevent injury in case of breakage. Required on California installations. Use 4 cables for dual spring doors. National Hardware Torsion Winding Rod, Series: V7677, Suitable For Use With: Garage Torsion Springs, 1/2 in Dia x 16 in Length, Steel, Plain Tests for and identifies various types of molds in the home or workplace. Everything needed for a complete mail-in mold test, including 6 test tapes, three polybags a test card, manual and preprinted return envelope. Lab analysis of $10 per sample submitted will specify the type of mold growth.
Stanley 104380 Splice Bracket ROLLER STND ZINC PLATED       CABLE SPG EXT LFT GLV 12FTX1/8
Designed to join two pieces of Stanley's 105270, 105676, 105213, and 105726 box rail. Meets ANSI/BHMA A 156.14. Includes lags. 1-3/4" Nylon roller, 4-1/2" stem, 7/16" steel shaft. Visual-pack. National Hardware Extension Spring Lift Cable, Series: N280, 1/8 in Cable Diameter, 12 ft Cable Length, Steel Cable, Galvanized Body Finish/Color, Standards: BHMA A138.18, For 7 ft Single or Double Wood or Metal Doors
Prime Line GD 52238 Hard Drawn Wire Winding Rod SHAFT LOCK CHRM 5/16IN SQX4IN L-HNDL LOCK UNIV CHM
Hard-drawn wire rods, the only tool used to wind and unwind tension on torsion springs. National Hardware Garage Door Handle, Series: V7640, 5.81 in Length, 1.33 in Width, Die-Cast Handle, Steel Shaft, Chrome Plated, 5/16 in Dia x 4 in Length Shaft, For Wood or Metal Garage Doors, Camper Tops and RVs National Hardware Locking L-Handle, Series: V7641, Universal, Suitable For Use With: Model 7645 Swivel Lock/7654 Snap Lock, Die-Cast Handle, Steel Shaft, Chrome, 5/16 sq-in x 3-11/16 in Shaft, For Wood or Metal Garage Doors, Camper Tops, RVs
Stanley 131490 Adjustable Reversible Stay Roller T-HNDL BLANK 5/16 SQX3IN CHRM National Hardware DP51MBC Single Box Rail Bracket
280-602 BLANK T-HANDLE
Our Price: $12.24
BOX RAIL BRACKETS GALV
Our Price: $12.73
Designed for use as a heavy-duty guide on large, sliding doors up to 3-3/4" thick. Slots in frame provide adjustment for holding doors against wood walls or posts. Delrin wheel is reversible; it can be used either side of frame. Offers sturdy steel frame construction. Meets ANSI/BHMA A 156.14. Roller is adjustable. Includes nail and lag screw holes. Hardened steel bolt for greater strength. Display packed National Hardware Blank T-Handle, Series: V7639, Die-Cast Handle, Steel Shaft, Chrome Plated, Includes: (1) 1/8 in Dia x 5/8 in Length Knurled Pin, (2) 2 Push Retainer For 0.309 sq Shaft, (3) Flat Washer 7/16 in ID and (4) NO 7 x 1 Oval Head Slotted Screws, 5/16 in Dia x 3 in Length Shaft Designed for mounting #5114 or #5116 box rail. Includes 2 lag bolts, carriage bolt and nut. BHMA A138.18. Suitable for use on corrugated metal siding due to narrow mounting surface on sliding door systems. Adjustable to bring rail closer or further away from building. 300 lb safe working load. 7.12"L x 3.25"W x 2"D. Can be used with flashing with the 5151 flashing bracket.
LOCKS ALUMINUM                Stanley 162297 Single Adjustable Door Stop First Alert/Brk Brands LT1 Test Kits
LOCKS ALUMINUM
Our Price: $12.76
National Hardware Dead Bolt Lock, Series: V7651, 2 Keys, Steel, Aluminum, Includes: (2) Keys, (4) NO 8 x 5/8 Pan Head Phillips Wood Screws, For Wood or Metal Garage Doors Designed to engage the bottom of a single TAB-LOC door in either the open or closed position to hold firm against the building. For bi-parting doors stop engages in the open position only, also used on wood frame doors using #6061 or #6062 continuous bottom guides. Slotted holes in each leg allow both lateral and vertical adjustments. Bolt, nut, and washer are included for easy attachment. Boxed. Test for lead on up to 4 separate surfaces with immediate results. Includes all needed materials, no additional fees required. 4 test packs. Carded.
First Alert RD1 Radon Test Kit Prime Line GD 52121 Door T Handle SHAFT LOCK CHRM 5/16SQX3-3/4IN
Charcoal test kit traps particle traces. Short term test takes only 2-3 days in home. Price includes lab analysis by an Environmental Protection Agency listed lab. Used when locking cylinder is mounted separately. 1-1/2" hole centers. Includes 1 die-cast outside handle with 5/16" square x 3"L shaft, and 1 die-cast zinc inside handle with set screw. National Hardware Locking T-Handle, Series: V7643, Suitable For Use With: Model 7645 Swivel Lock/7654 Snap Lock, 2 Keys, Die Cast Handle, Steel Shaft, Chrome, Includes: (2) NO 10 x 3/4 Phillips Pan Head Machine Screws and (1) Retainer Washer, 5/16 sq-in x 3-3/4 in Shaft, For Metal or Fiberglass Doors
Prime Line GD 52122 Door T Handle Lock Stanley 131706 Single Adjustable Door Guide Stanley 160754 Cam Latch
5/16" square shaft, 3"L, replaces most garage door, camper and RV locking handles. Zinc die-cast construction. 1-1/2" hole centers. Includes locking handle and 2 chrome plated solid brass keys. Extra-wide guides are designed for corrugated metal-clad doors, can be used as a door stop when mounted sideways. Curved section of guide may be turned sideways allowing straight access when installing screws. Fasteners are not included. Guides have holes for spikes as well as larger holes for 3/8" lag screw mounting. Guide is adjustable for doors up to 5-1/2" thick. Boxed
Prime Line GD 12191 Extension Spring 25 in L Stanley 161760 Cam Latch Prime Line GD 52123 Door Handle Lock
For use on sectional, overhead, wood doors 8'W x up to 6'6"H, 2 panel/4 section; or fiberglass doors 16'W x up to 7'H, 4 section. Use two 110lb springs for each 110lb door (1 on each side). Rated at 10,000 cycles. Includes safety cable, which protects against personal injury and property damage from broken springs. Color-coded and shrink-wrapped for selection ease. Polybagged. Designed to hold wood and metal doors firmly in place against the door jamb on farm and utility buildings. It also can be used for end gates on stake trucks. Offers 7" hook. Designed for right- or left-hand applications. Pre-punched, reversible strike plate for use on 1-1/2" or 3-1/2" thick door frames. Boxed. 5/16" square shaft, 2-7/8"L, replaces most garage door, camper and RV locking handles. Zinc die-cast construction. 1-3/4" hole centers. Includes locking handle and 2 chrome plated solid brass keys.
Prime Line GD52169 Door T Handle Lock Prime Line GD 52119 Deadbolt North States 4604 Security Gate
Zinc diecast construction; keyed lock; 5/16" square shaft, 4-5/8" long, 1-1/2" hole centers; replaces many garage door, camper and R.V. locking handles. Screws attach to lock from the inside of door. Contents: 1 locking handle; 2 keys. Used by many manufacturers; will replace most locking mechanisms of this type. Painted die-cast inside lock with heavy-duty steel spring bolt. Key cylinder has aluminum face and 5-pin tumbler lock with cylinder ring. Pressure-mounts instantly, securely without hardware. Wood frame with rigid diamond mesh panels and no-mar rubber bumpers. EZ-Adjust and Lock feature. Width expands 26" to 42".
Stanley 51EDBC Box Rail End Cap HANDLE OTSD LOCK              National Hardware DP51MSB Single Box Rail Splice Bracket
BOX RAIL BRACKETS GALV
Our Price: $17.01
Designed to press into rail to keep rail free of foreign materials from birds or weather . Can be used as center stop using 3/8" x 2" carriage bolts (not furnished). Often packed with box hangers. National Hardware Outside Locking Handle, Series: V7642, 7-1/2 in Overall Length, Die-Cast Handle, Steel Shaft, Chrome, 5/16 in Dia x 3-1/4 in Length Shaft Designed for mounting #5114 or #5116 box rail. Includes 2 lag bolts, carriage bolt and nut. BHMA A138.18. Suitable for use on corrugated metal siding due to narrow mounting surface on sliding door systems. Adjustable to bring rail closer or further away from building. 300 lb safe working load. 7.12"L x 3.25"W x 2"D. Can be used with flashing with the 5151 flashing bracket. One splice bracket should be installed on every length of rail to lock it in place.
Stanley 348052 Center Latch Prime Line GD 12192 Extension Spring 25 in L EXTENSION BLACK 110LBX25IN
EXTENSION 25X110# BLK
Our Price: $18.44
National Center Latch, Heavy Duty, 10.63 in Overall Length, 8.13 in Overall Width, 5.88 in Overall Depth, Zinc Plated For use on sectional, overhead, wood doors 8'W x up to 7'H, 2 panel/4 section; or fiberglass doors 16'W x up to 7'H, 4 section. Use two 120lb springs for each 120lb door (1 on each side). Rated at 10,000 cycles. Includes safety cable, which protects against personal injury and property damage from broken springs. Color-coded and shrink-wrapped for selection ease. Polybagged. National Hardware Extension Spring, Series: 7688, 25 in Nominal, 110 lb Load Capacity, Steel, Black, For 7 ft High Garage Doors
Stanley 160481 Guide Rail Prime Line GD 12202 Extension Spring 25 in L EXTENSION BLACK 120LBX25IN
EXTENSION 25X120# BLK
Our Price: $19.26
Designed to engage the bottom lateral of TAB-LOC doors to hold door firmly in place and prevent wind damage to both the door and building. Fastens to building using #6005 Guide Rail Brackets. Also used with #6061 or #6062 continuous bottom guides. Includes pre-punched mounting holes to attach #6005 guide rail brackets. Pack loose. For use on sectional, overhead, single car fiberglass doors. Use two 70lb springs for each 70lb door (1 on each side). Rated at 10,000 cycles. Includes safety cable, which protects against personal injury and property damage from broken springs. Color-coded and shrink-wrapped for selection ease. Polybagged. Color: Black. Boxed.
Stanley 185447 Center Latch EXTENSION BLACK 130LBX25IN    Prime Line GD 12194 Extension Spring 25 in L
EXTENSION 25X130# BLK
Our Price: $19.74
Designed for bi-parting wood sliding doors at least 1-1/2" thick. Cam action and adjustable hook holds doors tightly together. Pre-punched, reversible strike plate for use on 1-1/2" or 3-1/2" thick door frames. 15" long hook. Boxed. National Hardware Extension Spring, Series: 7690, 25 in Nominal, 130 lb Load Capacity, Steel, Black, For 7 ft High Garage Doors For use on sectional, overhead, wood doors 9'W x up to 7'H, 2 panel/4 section; or wood doors 16'W x up to 7'H, 2 panel/4 section. Use two 140lb springs for each 9'W 140lb door (1 each side); use 4 springs for each 16'W 140lb door (2 on each side). Rated at 10,000 cycles. Includes safety cable, which protects against personal injury and property damage from broken springs. Color-coded and shrink-wrapped for selection ease. Polybagged.
EXTENSION BLACK 140LBX25IN    EXTENSION BLACK 150LBX25IN    EXTENSION BLACK 150LBX25IN
EXTENSION 25X140# BLK
Our Price: $21.06
EXTENSION 25X150# BLK
Our Price: $21.33
EXTENSION 22X150# BLK
Our Price: $21.33
National Hardware Extension Spring, Series: 7690, 25 in Nominal, 140 lb Load Capacity, Steel, Black, For 7 ft High Garage Doors National Hardware Extension Spring, Series: 7690, 25 in Nominal, 150 lb Load Capacity, Steel, Black, For 7 ft High Garage Doors National Hardware Extension Spring, Series: 7691, 22 in Nominal, 150 lb Load Capacity, Steel, Black, For 7 ft High Garage Doors
Safety 1st GA087CRE4 Doorway Grate Prime Line GD52142 Carded Electric Key Lock Switch EXTENSION BLACK 160LBX25IN
EXTENSION 25X160# BLK
Our Price: $23.38
Marring bumpers help protect woodwork and walls. Adjusts from 28" to 38" to cover doorways with various widths, 23" high. Allows operation of garage door opener without a transmitter; mount to the exterior door jamb and hard wire to opener. Contents: 1 key cylinder with plastic housing and face plate assembly; 2 keys. National Hardware Extension Spring, Series: 7690, 25 in Nominal, 160 lb Load Capacity, Steel, Black, For 7 ft High Garage Doors
Stanley 5414BC Double Round Rail Bracket Prime Line GD 12205 Extension Spring 25 in L Prime Line GD 12193 Extension Spring 25 in L
Designed to be used with #5400 round rail to mount double runs of rail for by-passing doors to side of building installation. Includes lag bolt, two carriage bolts and two nuts. (1) Bracket should be installed every 2 feet of rail. Suitable for use on corrugated metal siding due to narrow mounting surface. For use on sectional, overhead, wood doors 9'W x 7'H, 4 panel/4 section; or wood doors 16'W x 7'H, 4 panel/4 section. Use two 160lb springs for each 9'W 160lb door (one each side); use four springs for each 16'W 160lb door (2 on each side). Rated at 10,000 cycles. Includes safety cable, which protects against personal injury and property damage from broken springs. Color-coded and shrink-wrapped for selection ease. Polybagged. For use on sectional, overhead, wood doors 8'W x up to 7'H, 4 panel/4 section. Use two 130lb springs for each 130lb door (1 on each side). Rated at 10,000 cycles. Includes safety cable, which protects against personal injury and property damage from broken springs. Color-coded and shrink-wrapped for selection ease. Polybagged.
Stanley 160499 Guide Rail Prime Line GD 12207 Extension Spring 22 in L Supergate III 8615 Classic Safety Gate
Designed to engage the bottom lateral of TAB-LOC doors to hold door firmly in place and prevent wind damage to both the door and building. Fastens to building using #6005 Guide Rail Brackets. Also used with #6061 or #6062 continuous bottom guides. Includes pre-punched mounting holes to attach #6005 guide rail brackets. Pack loose. For use on sectional, overhead doors 9'W x 7'H, 4 panel/4 section; or doors 16'W x 7'H, 4 panel/4 section. Use two 150lb springs for each 9'W 150lb door (1 each side); use 4 springs for each 16'W 150lb door (2 on each side). Rated at 10,000 cycles. Includes safety cable, which protects against personal injury and property damage from broken springs. Color-coded and shrink-wrapped for selection ease. FOR FRANTZ DOORS. Polybagged. Comes as a pressure gate for immediate mounting to doorways. Specially designed rail sockets included to allow gate to be used between wrought iron railings. Hardware included for hinge mounting to make a swing gate. Can be used between wall and wrought iron railings. Rounded edges will not pinch. Ideal for pets too. Width expands 26" to 42".
Stanley 105676 Rail Track Prime Line GD 12195 Extension Spring 25 in L Stack-On PC-95C Portable Case Key Lock With Combination Lock
Designed for use on doors weighing up to 450 pounds. Rail drilled 24" OC for brackets. Can be used with many types of single and multiple brackets. Screws included. Meets ANSI/BHMA A 156.14, Grade 1. Rail is formed to give an even tread to hanger wheels. For use on sectional, overhead, wood doors 9'W x 7'H, 4 panel/4 section; or wood doors 16'W x 7'H, 4 panel/4 section. Use two 150lb springs for each 9'W 150lb door (1 each side); use 4 springs for each 16'W 150lb door (2 on each side). Rated at 10,000 cycles. Includes safety cable, which protects against personal injury and property damage from broken springs. Color-coded and shrink-wrapped for selection ease. Polybagged. Designed to secure wallet, credit cards, cell phone or other valuables during transit. Slim-line design steel case slips into a briefcase, under a car seat or in your luggage for added security. Meets TSA airline guidelines. Includes 1,500 pound test steel cable which keeps the case secure when the cable is looped around any fixed object and through the cable slot in the body of the case. Locking the case keeps the cable in place. Foam interior protects the contents during transit. Case is secured with a 3-tumbler combination locking system. No Keys. 9-1/2? W x 6-1/2? D x 1-3/4? H.
Stack-On PC-95K Portable Case Key Lock With Key Lock Stanley 160507 Guide Rail Stanley 173708 Guide Rail Bracket
Designed to secure wallet, credit cards, cell phone or other valuables during transit. Slim-line design steel case slips into a briefcase, under a car seat or in your luggage for added security. Meets TSA airline guidelines. Includes 1,500 pound test steel cable which keeps the case secure when the cable is looped around any fixed object and through the cable slot in the body of the case. Locking the case keeps the cable in place. Foam interior protects the contents during transit. Case is secured with a key coded locking system. 9-1/2? W x 6-1/2? D x 1-3/4? H. Designed to engage the bottom lateral of TAB-LOC doors to hold door firmly in place and prevent wind damage to both the door and building. Fastens to building using #6005 Guide Rail Brackets. Also used with #6061 or #6062 continuous bottom guides. Includes pre-punched mounting holes to attach #6005 guide rail brackets. Pack loose. Designed to attach #6004 guide rail. Slotted hole in each leg allows for both lateral and vertical adjustments. Bolts, nuts and washers are included for easy attachment.
Stanley 105726 Rail Track North States 4623 Expandable Swing Gate Trackmaster 5400 Plain Round Barn Door Rail
Designed for use on doors weighing up to 450 pounds. Rail drilled 24" OC for brackets. Can be used with many types of single and multiple brackets. Screws included. Meets ANSI/BHMA A 156.14, Grade 1. Rail is formed to give an even tread to hanger wheels. Folds to 24" for easy storage. Top security rail adjusts automatically. Swings open in either direction with one hand. Secure 4-point steel mounting hardware. Width expands 24" to 60". Designed for doors weighing up to 600 lb. per panel. Can be used with various types of single and multiple brackets. Advanced rail design with flat top and sides for easier mounting and better stability. Self cleaning and smoother operation. Interchangeable with other brands of round rail. Manufactured from galvanized steel.
Stanley 261602 Flashing Bracket Stanley 184390 Astragal Rail Stanley 193847 Round Rail Splice Collar
With slots for 5120 flashings. Boxed loose. Designed to cover the gap between bi-parting doors. Design allows it to wrap around the flashing channel of the vertical. Fits both TAB-LOC and EASY-FRAME door verticals and attaches with pop rivets. Can be installed before or after doors are hung. Boxed. Designed for use with #5430, #5433, #5460 and #5465 round rail. Unique collar design supports the end of two rails while not interfering with flat mounting surface of rail. Fasteners are not required. Can be installed after rail is mounted to building. Rail bracket spacing holds collar in place.
Safety 1St Nature Next GA035 Security Gate SPRING TRSN LW PLN STL        SPRING TRSN RW PLN STL
Made from durable bamboo, a renewable resource, 100% recycled plastic panels.  Use in doorways and openings. Width expands 28" to 42". Boxed. Boxed.
Stanley 131565 Adjustable Door Guide Stanley 51HBC Double Box Rail Bracket Stanley 105213 Rail Track
Designed for single sliding or bi-parting metal or wood doors. Intended to take abuse from trucks, tractors and farm machinery when used around factory and farm buildings. Smooth ramp on each side of the guide prevents cutting tractor or truck tires. Mounts on concrete floors with lag screws and shields or on a 6" x 6" post. 1/2" rod or bolt inserted through hole in each side will serve as a center stop for bi-parting doors. Meets ANSI/BHMA, A 156.14. Manufactured from hot-rolled steel. Boxed. Designed to support a double run of #5114 or #5116 box rail. 1 Bracket should be installed every 2 feet of rail. Includes lag bolt. 300lb. safe working load. Designed for use on doors weighing up to 450 pounds. Rail drilled 24" OC for brackets. Can be used with many types of single and multiple brackets. Screws included. Meets ANSI/BHMA A 156.14, Grade 1. Rail is formed to give an even tread to hanger wheels.
Trackmaster 5400 Plain Round Barn Door Rail Stanley 264879 Astragal Rail Prime Line GD 12233 Torsion Spring
Designed for doors weighing up to 600 lb. per panel. Can be used with various types of single and multiple brackets. Advanced rail design with flat top and sides for easier mounting and better stability. Self cleaning and smoother operation. Interchangeable with other brands of round rail. Manufactured from galvanized steel. Designed to cover the gap between bi-parting doors. Design allows it to wrap around the flashing channel of the vertical. Fits both TAB-LOC and EASY-FRAME door verticals and attaches with pop rivets. Can be installed before or after doors are hung. Boxed. Use to replace torsion springs. Mounts to header directly above door. Requires 2 winding rods (No.52238 sold separately). Includes spring with winding cone and anchor cone attached. Color-coded for selection ease.
Prime Line GD 12232 Torsion Spring SPRING LFT-WD TRSN 1-3/4X32IN SPRING RGT-WD TRSN 1-3/4X32IN
Use to replace torsion springs. Mounts to header directly above door. Requires 2 winding rods (No.52238 sold separately). Includes spring with winding cone and anchor cone attached. Color-coded for selection ease. National Hardware Torsion Spring, Series: 7680, Left Wind, 1-3/4 in Inside Diameter, 0.243 in Wire, 32 in Overall Length, Steel, Plain, For Residential Garage Doors National Hardware Torsion Spring, Series: 7681, Right Wind, 1-3/4 in Inside Diameter, 0.243 in Wire, 32 in Overall Length, Steel, Plain, For Residential Garage Doors
Stanley 5415BC Double Round Rail Bracket Stanley 105270 Rail Track Stanley 184408 Astragal Rail
Designed to be used with #5400 round rail to join and hold two double lengths of rail together for bi-passing doors. Includes lag bolt, two carriage bolts and two nuts. Suitable for use on corrugated metal siding due to narrow surface. Adjustable to bring rail closer or further away from building. 300 lb. safe working load. Designed for use on doors weighing up to 450 pounds. Rail drilled 24" OC for brackets. Can be used with many types of single and multiple brackets. Screws included. Meets ANSI/BHMA A 156.14, Grade 1. Rail is formed to give an even tread to hanger wheels. Designed to cover the gap between bi-parting doors. Design allows it to wrap around the flashing channel of the vertical. Fits both TAB-LOC and EASY-FRAME door verticals and attaches with pop rivets. Can be installed before or after doors are hung. Boxed.
SPRING LFT-WD TRSN 2INX32IN   SPRING RGT-WD TRSN 2INX32IN   SPRING TRSN LW PLN STL
National Hardware Torsion Spring, Series: 7682, Left Wind, 2 in Inside Diameter, 1/4 in Wire, 32 in Overall Length, Steel, Plain, For Residential Garage Doors National Hardware Torsion Spring, Series: 7683, Right Wind, 2 in Inside Diameter, 1/4 in Wire, 32 in Overall Length, Steel, Plain, For Residential Garage Doors Boxed.
SPRING TRSN RW PLN STL        Stanley 104752 Adjustable Wall Mount Splice Bracket Trackmaster 5400 Plain Round Barn Door Rail
Boxed. Designed for mounting a double run of Stanley's 105270, 105676, 105213, and 105726 box rail on buildings with corrugated metal siding. Includes lags. Display Packed. Designed for doors weighing up to 600 lb. per panel. Can be used with various types of single and multiple brackets. Advanced rail design with flat top and sides for easier mounting and better stability. Self cleaning and smoother operation. Interchangeable with other brands of round rail. Manufactured from galvanized steel.
Trackmaster 5400 Plain Round Barn Door Rail Stanley 184416 Astragal Rail Supergate V 8648 Safety Gate
Designed for use on doors up to 450 lb. Can be used with many types of single and multiple brackets. Meets ANSI/BHMA A156.14, Grade 2. Rail is carefully formed to give an even tread to hanger wheels. Manufactured from galvanized steel. Designed to cover the gap between bi-parting doors. Design allows it to wrap around the flashing channel of the vertical. Fits both TAB-LOC and EASY-FRAME door verticals and attaches with pop rivets. Can be installed before or after doors are hung. Boxed. Slides together and swings out of the way when not in use. Can be removed from mounting brackets for storage. One-handed operation. Rounded edges will not pinch. All hardware and brackets included for mounting. Ideal for pets too. Width expands 22" to 62".
Stanley 51K Triple Box Rail Bracket Stanley 105395 Box Rail Stanley 131458 Adjustable Door Bumper
Designed to support a triple run of #5114 or #5116 box rail. Includes two lag bolts. 1 Bracket should be installed every 2 feet of rail. Can be used for triple bi-passing doors. Can also be used without middle bracket for 3-1/2" bi-passing doors. 300 lb. safe working load. Designed for use on doors weighing up to 450 pounds. Rail drilled 24" OC for brackets. Can be used with many types of single and multiple brackets. Screws included. Meets ANSI/BHMA A 156.14, Grade 1. Rail is formed to give an even tread to hanger wheels. Adjustable 2-1/2" to 3-1/8". Pack Loose.
SAFE DIGITL W/KEY OVRD .58CUFT Stanley DP5420BC Single Round Rail Bracket North American Tool 52286 Keyless Digital Electronic Safe
Designed with an electronic lock with override key, 0.5 Cubic feet. Solid steel pry-resistant door and body help protect against theft and unauthorized entry. Carpeted floor protects your valuables. Size: 13-3/4" W x 10-5/8" D x 8-11/16" H. Designed to be used with #5400 round rail to mount rail to side of building. Includes lag bolt. (1) Bracket should be installed every 2 feet of rail. Safe working load 300 lbs. Solid steel construction,19 gauge steel plate housing, 11 gauge steel plate door, floor or wall mount. Concealed, tamper-proof hinge, LCD display, hidden lock with two keys. Electronic combination can be programmed with codes up to 8 digits. Combination can be changed for maximum security. Electronic keypad uses four AA batteries (included). 0.3 Cubic Feet. Outside::  8"H x 8"W x 12-1/4"D. Inside: 7-3/4"H x 5-7/8"W x 12"D.
Stanley 194001 Round Snap-On Track Flashing Bracket Safety 1st 42066 Wide Doorway Gate Trackmaster 5400 Plain Box Barn Door Rail
Designed for use on doors 1" thick with National #5430/5433 Trackmaster round rail and #5450/5455 flashing. Boxed Loose. Perfect for wide doorways and open spaces. Pressure mounted - no hardware required. Stretches from 38-60? wide. Machine washable. Stain resistant protection. Includes drawstring storage and carry bag. Designed for use on doors up to 450 lb. Can be used with many types of single and multiple brackets. Meets ANSI/BHMA A156.14, Grade 2. Rail is carefully formed to give an even tread to hanger wheels. Manufactured from galvanized steel.
Stanley 193946 Round Face Mount Rail Bracket Easy Frame 175661 Vertical Door Frame Stack-On PC-900 Portable Case Key Lock With Electronic Lock
With mounting brackets, 600 pound capacity. Pack Loose. For 1-1/2" Steel / Wood Lateral Doors. Ln Loose. Designed to secure a wallet, credit cards, cell phone, for concealed-weapon permit holders during transit. Electronic locks allow for a 3 to 8 digit combination to be programmed into the case and come with a backup trouble key. The slim line design of this case allows for storage under the seat of many cars and trucks. The foam padded interior protects contents from scratching. This portable case meets TSA airline firearm guidelines. It is designed to be secured with steel cable (1500-Pound test.), cable is included. 12-1/4"W x 12-3/4"D x 2-3/4"H.
Stanley 161448 Bottom Mount Door Guide Stanley 142364 Box Rail Stack-On PS-514-12 Portable Safe With Electronic Lock
Designed for use on 1-1/2" thick wood frame sliding doors. When nailed to the bottom of a wood frame door, these guides engage with #6004 guide rail to prevent wind damage to both the door and building. Pre-punched mounting brackets are attached. Pack loose. Includes mounting/flashing brackets which are welded to the rail on 2 Ft. centers. Intended for doors weighing up to 450 lbs per panel. Boxed loose. Solid steel, pry resistant door has concealed hinges and 2 steel live action locking bolts.  One removable shelf. Foam padded bottom and shelf. California-approved firearm safety device that meets the requirements of Penal Code section 23655 and the regulations issued there under. Electronic lock has an easy to read key pad and includes a low battery warning light. Time out period after 3 incorrect combination attempts. Back-up key is included. 13-3/16" W x 9-13/16" D x 9-13/16" H.
Mintcraft JL-45891-3L Digital Electronic Safe Stanley 51KS Triple Box Rail Bracket Easy Frame 175687 Vertical Door Frame
Codes up to 8 digits, solid steel construction with powder coating finish, 4 AA batteries, 2 emergency back-up keys and 4 anchor bolts included. External dimensions: 9-7/8'' high x 13-3/4'' wide x 9-7/8'' deep. Not fireproof. Designed to join a triple run of #5114 or #5116 box rail. Includes two lag bolts. Can be used for triple bi-passing doors. Can also be used without middle bracket for 3-1/2" bi-passing doors. One splice bracket should be installed on every length of rail to lock it in place. 300 lb. safe working load. For 1-1/2" Steel / Wood Lateral Doors. Ln Loose.
Stanley 193953 Round Face Mount Rail Bracket Stanley 142117 Top Mount Rail Bracket Stanley 161455 Bottom Mount Door Guide
With mounting brackets, 600 pound capacity. Pack Loose. Includes mounting/flashing brackets which are welded to the rail on 2 Ft. centers. Intended for doors weighing up to 450 lbs per panel. Boxed loose. Designed for use on 1-1/2" thick wood frame sliding doors. When nailed to the bottom of a wood frame door, these guides engage with #6004 guide rail to prevent wind damage to both the door and building. Pre-punched mounting brackets are attached. Pack loose.
Easy Frame 175703 Vertical Door Frame Stanley 193961 Round Face Mount Rail Bracket Stanley 106195 Covered Rail
For 1-1/2" Steel / Wood Lateral Doors. Ln Loose. With mounting brackets, 600 pound capacity. Pack Loose. Side-mounted rail designed for use on doors up to 450 lb. Cover is spot welded to top of rail with weld spots painted to prevent rusting. Brackets are not required since the cover provides a continuous bracket. Rail can be mounted with lag screws. Weather resistant.
Stanley 142158 Top Mount Rail Bracket Mintcraft S-30ES Large Digital Electronic Safe with Shelf Easy Frame 175729 Vertical Door Frame
Includes mounting/flashing brackets which are welded to the rail on 2 Ft. centers. Intended for doors weighing up to 450 lbs per panel. Boxed loose. Large electronic digital safe with shelf. Codes up to 8 digits, solid steel construction with durable powder coating finish. Dimensions: external, 11-13/16" height x 15" width x 11-13/16" depth, internal 11-9/16" height x 14-3/4" width x 9-3/16" depth. Safe is neither fire safe nor water proof. For 1-1/2" Steel / Wood Lateral Doors. Ln Loose.
Stanley 174110 Box Rail Stanley 161463 Bottom Mount Door Guide Stanley 106112 Covered Rail
Designed for doors weighing up to 450 lb. One-piece, mounted design allows fast, simple installations without mounting brackets. Features a durable, white prefinished cover that is permanently welded to rail. Flashing pre-punched for attaching to 2"x6" track board with 2-1/2" ring shank nails with neoprene washer. Designed for use on 1-1/2" thick wood frame sliding doors. When nailed to the bottom of a wood frame door, these guides engage with #6004 guide rail to prevent wind damage to both the door and building. Pre-punched mounting brackets are attached. Pack loose. Side-mounted rail designed for use on doors up to 450 lb. Cover is spot welded to top of rail with weld spots painted to prevent rusting. Brackets are not required since the cover provides a continuous bracket. Rail can be mounted with lag screws. Weather resistant.
Easy Frame 175745 Vertical Door Frame Stanley 161471 Bottom Mount Door Guide SAFE PISTOL DIGTL/KEYD .08CUFT
For 1-1/2" Steel / Wood Lateral Doors. Ln Loose. Designed for use on 1-1/2" thick wood frame sliding doors. When nailed to the bottom of a wood frame door, these guides engage with #6004 guide rail to prevent wind damage to both the door and building. Pre-punched mounting brackets are attached. Pack loose.
Stanley 104786 Adjustable Wall Mount Box Rail Bracket Stanley 193987 Face Mount Rail Bracket Stanley 142216 Box Rail
Designed for mounting a double run of #5114 or #5116 box rail. Includes 4 lag bolts, 2 carriage bolts and 2 nuts. Suitable for use on corrugated metal siding due to narrow mounting surface. 1 Bracket should be installed every 2 feet of rail. Adjustable to bring rail closer or further away from building. Can be used with flashing with the 5151 flashing bracket. 300lb. safe working load. With mounting brackets, 600 pound capacity. Pack Loose. Includes mounting/flashing brackets which are welded to the rail on 2 Ft. centers. Intended for doors weighing up to 450 lbs per panel. Boxed loose.
Stanley 174128 Top Mount Rail Bracket Stanley 106120 Covered Rail Stanley 174136 Box Rail
Designed for doors weighing up to 450 lb. One-piece, mounted design allows fast, simple installations without mounting brackets. Features a durable, white prefinished cover that is permanently welded to rail. Flashing pre-punched for attaching to 2"x6" track board with 2-1/2" ring shank nails with neoprene washer. Side-mounted rail designed for use on doors up to 450 lb. Cover is spot welded to top of rail with weld spots painted to prevent rusting. Brackets are not required since the cover provides a continuous bracket. Rail can be mounted with lag screws. Weather resistant. Designed for doors weighing up to 450 lb. One-piece, mounted design allows fast, simple installations without mounting brackets. Features a durable, white prefinished cover that is permanently welded to rail. Flashing pre-punched for attaching to 2"x6" track board with 2-1/2" ring shank nails with neoprene washer.
Stanley 174433 Box Rail
Designed for doors weighing up to 450 lb. One-piece, mounted design allows fast, simple installations without mounting brackets. Features a durable, white prefinished cover that is permanently welded to rail. Flashing pre-punched for attaching to 2"x6" track board with 2-1/2" ring shank nails with neoprene washer.
   
 
1