Home > HARDWARE > WINDOW & DOOR HARDWARE > WINDOW HARDWARE > SHUTTER HARDWARE
Sort By:
1
Prime Line PL 7729 Quickie Square Cut Frame Corner Hampton V777ST Strike Plate Hampton V777STBL Strike Plate
Use with appropriate screen frame to form a finished window screen. Allows frame to be square cut for easy construction by homeowner. Slotted holes for universal use. Packed with installation screws. Slotted holes for universal use. Packed with installation screws.
M-D 65110 Z-Bar Carpet/Floor Edging Prime Line L 5540 Snap-On Spring Loaded Window Screen Plunger Bolt Prime Line PL 7756 Lift Spline Channel Pull Tab
Use to create a finished edge where stretch-in carpeting meets adjacent floors. Install with tackstrip. Attach to tackstrip, roll carpet over edge of Z bar, and tap down. Holds aluminum frame screens into window frames. 1-1/2"L x 1/8"OD nylon plunger and 7/32"OD base with 7/16"L nylon cap. Fits frames 3/8" or 7/16" x 3/4". Installed in spline channel to aid in removal of window screen from window frame. 15/16"W to 5/8"W x 1-1/16"H x 1/4"D, with 3/32" lip.
STRIKE RGD RPLCMT ST ALUM     Schlage Ives 07A3 Sash Crescent Lock Prime Line PL 7727 Quickie Square Cut Frame Corner
Replacement strikes for storm door latches. Fits 1/4", 3/8" and 1/2" strikes. Includes 2 shims. Visual-pack. Lock base: 15/16" x 2-5/8"; strike: 5/8" x 2-5/8". Use with appropriate screen frame to form a finished window screen. Allows frame to be square cut for easy construction by homeowner.
Prime Line PL 7921 Spline Channel Pull Tab Prime Line PL7724 Square Cut Screen Frame Corner Prime Line T8689 Tilt and Corner Key Set
Installed in spline channel to aid in removal of window screen from window frame. 15/16"W to 5/8"W x 1-1/16"H x 1/4"D, with 3/32" lip. Use with appropriate screen frame to form a finished window screen. Allows frame to be square cut for easy construction by homeowner. Use to repair storm door windows and screens. Set includes: (2) each 3/16" Corner Keys and (2) 3/16" x 5/32" Tilt Keys.
Prime Line PL 7919 Flush Panel Clip Prime Line PL 7728 Quickie Square Cut Frame Corner BARREL BOLT STL 2IN SAT BRASS
Use to attach screens and storm windows to window opening. Includes No.8 x 3/4" Phillips pan-head sheet metal screw. Depth 1/16". Use with appropriate screen frame to form a finished window screen. Allows frame to be square cut for easy construction by homeowner. Rust resistant; can be used for both interior and exterior applications. Screws included.
Prime Line T 8677 Flush Panel Clip Prime Line L 5506 Flush Screen Clip TURN BUTTON FULL 1-3/4IN ZINC
Use to secure storm panels to storm doors. Includes No.8 x 3/4" Phillips pan head sheet metal screw. 1"L x 3/8"W, flush tip. Use to attach screens and storm windows to window opening. Includes 12 clips with No.8 x 3/4" Phillips pan-head sheet metal screw. Holds screen and storm panels in place. Includes screws.
Prime Line U 9980 Economy Window Lock Prime Line PL 7738 Flush Screen Clip Prime Line U 10551 Sliding Economy Window Lock
Easy-to-install, extruded aluminum housing with steel screw to securely lock window in closed or ventilating position. 1"L x 7/16"H. Use to attach screen to window opening. Includes 12 clips and Phillips pan-head - No. 8 sheet metal screws for 3/16" and smaller offsets, No. 10-24 machine screws for 5/16" and larger. Economy sliding window lock with single thumbscrew and no-mar rubber insert to help prevent marring on window frame.
Prime Line P 8098 Screen Repair Patch M-D 21501 Carpet Screw Nail Prime Line PL 7773 Screen Clip
Installs with no tools required to cover holes in existing aluminum screened windows or doors. Carpet screw nails for use with M-D floor trims. Hammer screw nails into wood or concrete floors. Wooden pegs needed for concrete sub-floors. Use to attach screen to window opening. Includes 12 clips and Phillips pan-head - No. 8 sheet metal screws for 3/16" and smaller offsets, No. 10-24 machine screws for 5/16" and larger.
BARREL BOLT STL 2IN ZINC PLATE New York Wire 90501 Screen Patch Repair Kit National Hardware V83 Weather Resistant Half Turn Button
TURN BUTTONS ZN PLT
Our Price: $3.00
Rust resistant; can be used for both interior and exterior applications. Screws included. (7-Pack)  Comes with instructions for installation. Does not require tools. National Hardware Half Turn Button, Weather Resistant, Series: V83, Cold Rolled Steel, Zinc Plated, 1.27 in Length, Includes: Mounting Screws, BHMA A138.18, 1/2 in Size, For Complete Support of Window With Minimal Space Requirements
Prime Line PL 7776 Corner Mounted Flat Tension Spring M-D 21485 Carpet Screw Nail Prime Line L 5527 Flat Tension Spring
Heat-treated steel, holds window screens into sliding aluminum window screen channels. Installs without tools, slips into corner of 5/16", 3/8", and 7/16" frame. Contents: 6 springs. Carpet screw nails for use with M-D floor trims. Hammer screw nails into wood or concrete floors. Wooden pegs needed for concrete sub-floors. Heat-treated steel, holds window screens into sliding aluminum window screen channels. Requires two 3/16" holes drilled 3-3/16" apart.
Prime Line U 9938 Window Flip Lock Prime Line PL 7924 Plunger Latch STRIKER PLATE STORM BLACK
Flip lock mounts on vertical track, stops window in vent position. Wedge flips out of the way to avoid opening. Includes 2 locks and installation screws. Holds aluminum frame screens into window frames. 1-1/2"L x 5/32"OD nylon plunger and 3/16" OD base with 7/16"L nylon cap. Black. High strike offset. Slotted holes for easy adjustment. For wood or metal doors. Includes screws.
Prime Line PL 7741 Window Screen Clip National Hardware V83 Weather Resistant Full Turn Button Prime Line PL 7777 Plunger Latch
Use to attach screen to window opening. Includes 12 clips and Phillips pan-head - No. 8 sheet metal screws for 3/16" and smaller offsets, No. 10-24 machine screws for 5/16" and larger. National Hardware Full Turn Button, Weather Resistant, Series: V83, Cold Rolled Steel, Zinc Plated, 1.71 in Length, Includes: Mounting Screws, BHMA A138.18, 1-3/4 in Size, For Window Support Holds aluminum frame screens into window frames. 1-1/2"L x 1/8"OD nylon plunger and 7/32"OD base with 7/16"L nylon cap. Fits frames 3/8" or 7/16" x 3/4".
Prime Line PL 7916 Window Screen Clip Prime Line P 8095 Adhesive Backed Screen Repair Patch Prime Line P 8096 Adhesive Backed Self-Stick Screen Repair Patch
Use to attach screen to window opening. Includes 12 clips and Phillips pan-head - No. 8 sheet metal screws for 3/16" and smaller offsets, No. 10-24 machine screws for 5/16" and larger. Adhesive backed patches used to repair holes and tears in screen doors and windows. Contents: 5 fiberglass screen patches. 3" x 3" Patches. Adhesive backed patches used to repair holes and tears in screen doors and windows. Contents: 5 fiberglass screen patches. 3" x 3" Patches.
LOCK SASH BRASS               Schlage SP07A5 Sash Crescent Lock Prime Line F 2599 Window Tilt Latch
SASH LOCKS BRASS
Our Price: $3.50
Draws window frames together to reduce rattle. Crescent type lock is for double-hung windows. Mounting screws included to match product finish. Mini-pack bagged. Lock base: 15/16" x 2-5/8"; strike: 5/8" x 2-5/8". Spring-loaded vinyl tilt latch; used on single or double-hung, aluminum or vinyl windows. Use in sash panels designed to tilt in and down from top of window. Includes 1 left hand latch; 1 right hand latch and 1 set of screws.
Prime Line F 2589 Sash Lock Prime Line F 2590 Slimline Sash Lock Prime Line L 5503 Screen Clip
Used on vertical and horizontal sliding windows. Does not use keepers, latch engages fixed rail to lock. Includes 25/32"W x 2-15/16"L lock, and 2 installation screws. 2-1/4" hole centers. Used on vertical and horizontal sliding windows. Does not use keepers, latch engages fixed rail to lock. Includes 25/32"W x 2-15/16"L lock, and 2 installation screws. 2-1/4" hole centers. Used to secure window screen frames to windows. Comes complete with fasteners for a quick and easy installation.
Prime Line L 5541 Snap-On Spring Loaded Window Screen Plunger Bolt Prime Line PL7768 Spline Channel Bail Latch Prime Line PL 7947 Storm Door Panel Clip
Holds aluminum frame screens into window frames. 1-1/2"L x 1/8"OD die-cast plunger and 7/32"OD base with 7/16"L nylon cap. Fits frames: 3/8" or 7/16" x 3/4". Stamped aluminum, installed into spline channel of window screen to hold bottom of screen to wood-framed windowsill. Includes ball-head screw. Fits most screen frame sizes. Attaches storm windows or screen panels to storm doors. Includes installation thumbscrew. 1"L x 1/2"W.
Prime Line F2598 Spring Loaded Tilt Latch LOCK SASH NICKEL              LOCK SASH WHITE
SASH LOCKS NICKEL
Our Price: $3.82
SASH LOCKS WHITE
Our Price: $3.82
Spring-loaded vinyl tilt latch; used on single or double-hung, aluminum or vinyl windows; for use on sash panels designed to tilt in and down from the top. Contents: 1 left hand latch; 1 right hand latch; 1 set of installation screws. Draws window frames together to reduce rattle. Crescent type lock is for double-hung windows. Mounting screws included to match product finish. Mini-pack bagged. Draws window frames together to reduce rattle. Crescent type lock is for double-hung windows. Mounting screws included to match product finish. Mini-pack bagged.
LOCK SASH ANT BRASS           Prime Line PL 7951 Storm Door Panel Clip SASH LOCK 2-1/2IN WHITE COATED
SASH LOCKS ANT BRS
Our Price: $3.82
Draws window frames together to reduce rattle. For double-hung windows. Mounting screws included to match product finish. Bagged. Attaches storm windows or screen panels to storm doors. Includes installation thumbscrew. 3/4"L x 1/2"W. Screws included.
Prime Line F2627 Tilt Latch Frost King H113FS/3 Fluted Carpet Bar Prime Line L 5573 Screen Clip
Spring-loaded vinyl tilt latch; used on single or double-hung, aluminum or vinyl windows. Use in sash panels designed to tilt in and down from top of window. Includes 1 left hand latch; 1 right hand latch and 1 set of screws. Joins carpet with other types of flooring at a lower height. Covers seams and spaces. Use to attach screen to window opening. Includes 12 clips and Phillips pan-head - No. 8 sheet metal screws for 3/16" and smaller offsets, No. 10-24 machine screws for 5/16" and larger.
Prime Line F 2574 Sash Lock SASH LOCK 2-1/2IN BRASS PLATED Prime Line F 2533 Slimline Sash Lock
Used on many double hung windows. Includes lock, keeper, and set of installation screws. 5/8"W lock and keeper bases. 1-15/16" hole centers. Screws included. Fits aluminum, vinyl, or wood double hung windows. Includes 25/32"W lock, 5/16"W keeper, and set of installation screws. 2-1/4" hole centers.
VENT STOP WINDOW BRASS        National Hardware V600 Crescent Rigid Sash Lock Hampton V29 Snap Fastener
WINDOW VENT STOPS BRS
Our Price: $4.01
SASH LOCKS BRASS
Our Price: $4.03
Designed to provide ventilation for all wood, double-hung and sash windows. Catch slides over when needed and slides out of the way when not needed. Decorative strike provided to prevent window damage. Steel body and strike. Visual-pack. National Hardware Sash Lock, Crescent, Rigid, Series: V600, Suitable For Use With: Double-Hung Windows, Die Cast Zinc, Brass, 1.68 in Overall Length, 2.45 in Overall Width, 0.88 in Overall Depth, Includes: Mounting Screws Holds storm windows, screens, combination door panels firmly in frames. Snap plate made of tempered spring steel. Snap-action of fasteners allows installation and removal of panels.
Prime Line PL 7939 Storm Door Panel Clip SASH LOCK 2-1/2IN BRT CHROME  SASH HANGER SET ZINC PLATED
Attaches storm windows or screen panels to storm doors. Includes installation thumbscrew. 3/4"L x 1/2"W. Screws included. Includes: 2 pcs - 1-7/8" Hanger Eye, 1-7/8" x 3/4" Hanger Eye, 2 pcs Hanger, (1) 1-1/2" Hook & Eye, and one Screw.
STRIKE RPLCMT BLACK           STRIKE RPLCMT ZINC PLATED     STRIKE RPLCMT WHITE
REPLACEMENT STRIKES BLK
Our Price: $4.18
REPLACEMENT STRIKES WHT
Our Price: $4.18
Die cast & steel rod. Visual-pack. Die cast & steel rod. Visual-pack. Die cast & steel rod. Visual-pack.
SASH LOCK 2-1/2IN VEN BRONZE  National Hardware V833 Window Bolt National Hardware V833 Window Bolt
WINDOW BOLTS 2IN ZN PLT
Our Price: $4.23
WINDOW BOLTS 2IN BRS
Our Price: $4.23
Screws included. National Hardware Window Bolt, Series: V833, 0.31 in Bolt Diameter, 2 in Bolt Length, Steel, Zinc Plated, BHMA A138.18, For Security Applications Such as on Windows, Cabinets, Chests and Doors National Hardware Window Bolt, Series: V833, 0.31 in Bolt Diameter, 2 in Bolt Length, Steel, Brass, BHMA A138.18, For Security Applications Such as on Windows, Cabinets, Chests and Doors
TURN BUTTON HALF 1-1/4IN GALV Prime Line U 9132 Magnetic Bullet Catch CATCH BALL DRIVE-IN ORB
CATCH BALL DRIVE-IN ORB
Our Price: $4.36
Diecast, plated bullet catch for use on interior closet doors and other utility doors. For use in wood, metal closet or cabinet doors. Adjustable tension, includes fasteners for quick and easy installation.
CATCH BALL DRIVE-IN POL BRSS  CATCH BALL DRIVE-IN SAT NKL   CATCH BALL DRIVE-IN ANTBRS STL
For use in wood, metal closet or cabinet doors. Adjustable tension, includes fasteners for quick and easy installation. For use in wood, metal closet or cabinet doors. Adjustable tension, includes fasteners for quick and easy installation. For use in wood, metal closet or cabinet doors. Adjustable tension, includes fasteners for quick and easy installation.
BALL CATCH STN CHM            Prime Line PL 14621 Lift Spline Channel Pull Tab Prime Line U 9924 Cam Action Sash Lock
For use in wood, metal closet or cabinet doors. Adjustable tension. Includes fasteners for quick and easy installation. Lift tab installed in spline channel to aid in removal of window screen from window frame. 15/16"W to 5/8"W x 1-1/16"H x 1/4"D, with 3/32" lip. Cam action sash lock universal design. Stamped steel construction. Includes lock with keeper and installation screws. Multiple hole center. Prefix U on factory number denotes new Defender Security packaging.
National Hardware V80 Sash Hanger National Hardware V600 Crescent Rigid Sash Lock National Hardware V600 Crescent Rigid Sash Lock
SASH LOCKS NICKEL
Our Price: $4.47
SASH LOCKS ANT BRS
Our Price: $4.47
National Hardware Sash Hanger, Series: V80, Suitable For Use With: Flush Screens and Storm Windows, Hot Rolled Steel, Zinc Plated, 1.38 in Height, Includes: Mounting Screws, 0.2 in Diameter Mounting Hole National Hardware Sash Lock, Crescent, Rigid, Series: V600, Suitable For Use With: Double-Hung Windows, Die Cast Zinc, Nickel Plated, 1.68 in Overall Length, 2.45 in Overall Width, 0.62 in Overall Depth, Includes: Mounting Screws National Hardware Sash Lock, Crescent, Rigid, Series: V600, Suitable For Use With: Double-Hung Windows, Die Cast Zinc, Antique Brass, 1.68 in Overall Length, 2.45 in Overall Width, 0.62 in Overall Depth, Includes: Mounting Screws
Frost King H113FB/3 Fluted Carpet Bar WINDOW LOCK THUMBSCREW ALUM   Hampton V832CS Screen Door Clip
Joins carpet with other types of flooring at a lower height. Covers seams and spaces. Security lock for sliding windows and doors. Fits most storm doors, holds combination windows and screens in place. Includes 8 screws and 8 clips.
SNAP FASTENER 15/16X2-1/8IN   National Hardware V600 Crescent Rigid Sash Lock LOCK SASH CHM
SASH LOCKS WHITE
Our Price: $4.67
SASH LOCKS CHROME
Our Price: $4.67
National Hardware Sash Lock, Crescent, Rigid, Series: V600, Suitable For Use With: Double-Hung Windows, Die Cast Zinc, White, 1.68 in Overall Length, 2.45 in Overall Width, 0.62 in Overall Depth, Includes: Mounting Screws Draws window frames together to reduce rattle. Crescent type lock is for double-hung windows. Mounting screws included to match product finish. Mini-pack bagged.
National Hardware V601 Crescent Sash Lock Prime Line PL7972 Screen Stretch Clip LOCK SASH BRASS
SASH LOCKS ANT BRS
Our Price: $4.67
SASH LOCKS BRASS
Our Price: $4.74
National Hardware Sash Lock, Crescent, Series: V601, Suitable For Use With: Double-Hung Windows, Die Cast Zinc, Antique Brass, Includes: Mounting Screws Stamped aluminum, use to attach window screens to awning and other types of windows. Includes No.10 x 3/8" Phillips pan-head sheet metal screw. Draws window frames together to reduce rattle. For double-hung windows. Mounting screws included to match product finish. Visual-pack.
Frost King H591FS/3 Fluted Carpet Bar Prime Line PL 7735 Window Screen Clip Prime Line PL 7749 Double Wing Clip
Joins carpet with other types of flooring at a lower height. Covers seams and spaces. Use to attach screen to window opening. Includes 12 clips and No. 8 Phillips pan head sheet metal screws for clips 1/4" and smaller - No. 10-24 Phillips pan head machine screws for clips 5/16" and larger. Use to attach screens and storm windows to window opening. Includes No.6 x 5/8" Phillips pan-head sheet metal screw.
Hampton V12 Cadmium Storm Door Catch LOCK SASH BRASS               FASTENER SNAP ZINC PLATED
SASH LOCKS BRASS
Our Price: $5.00
Heavy steel with extruded bearing in housing and rocker arm - assures smooth action. Includes screws. Draws window frames together for a tight seal. Cam-action sash lock is for designed to lock and draw tight double-hung or sliding windows. Mounting screws included to match product finish. Designed to keep storm windows, screens and other panels in place. Makes window easy to remove. Tempered spring steel for long life. Spring steel base, cold rolled steel center piece. Visual-pack.
Prime Line L5645 Retainer Clip Prime Line F2728 Window Tilt Latch Prime Line F2628 Spring Loaded Tilt Latch
Plastic with steel pin, used to secure decorative window grid in place. Fits 5/8" wide grids. Spring loaded vinyl tilt latch used on single or double hung, aluminum windows. For use on sash panels designed to tilt in and down from the top. Contents: 1 left hand latch, 1 right hand latch and 1 set of installation screws. Spring loaded vinyl tilt latch; used on single or double hung, aluminum windows. Unique wrap-around design attaches to top rail and stile. Fits On: tilt-out window by Better Bilt. Contents: 1 left hand latch; 1 right hand latch; 1 set of installation screws.
Prime Line F2527 Cam Action Window Sash Lock Frost King H591FB/3 Fluted Carpet Bar Prime Line F 2734 Spring Loaded Window Tilt Latch
Cam-action sash lock; universal design; stamped steel construction. Contents: 1 sash lock; 1 keeper; 1 set of installation screws. 1-7/8" Hole centers. Joins carpet with other types of flooring at a lower height. Covers seams and spaces. Spring-loaded, vinyl window tilt latch. Used on single or double hung vinyl windows. Fits a milled slot on window rail.
Frost King H1591FS3 Fluted Carpet Bar Prime Line PL 7775 Window Screen Clip Prime Line PL7774 Screen Clip
Joins carpet with other types of flooring at a lower height. Covers seams and spaces. Use to attach screen to window opening. Includes 12 clips and Phillips pan-head - No. 8 sheet metal screws for 3/16" and smaller offsets, No. 10-24 machine screws for 5/16" and larger. Use to attach screen to window opening. Includes 12 clips and Phillips pan-head - No. 8 sheet metal screws for 3/16" and smaller offsets, No. 10-24 machine screws for 5/16" and larger.
Prime Line PL 7737 Window Screen Clip LOCK SASH ORB                 LOCK SASH STN NKL
SASH LOCKS STN NCKL
Our Price: $5.44
Use to attach screen to window opening. Includes 12 clips and No. 8 Phillips pan head sheet metal screws for clips 1/4" and smaller - No. 10-24 Phillips pan head machine screws for clips 5/16" and larger. Draws window frames together to reduce rattle. Crescent type lock is for double-hung windows. Mounting screws included to match product finish. Mini-pack bagged. Draws window frames together to reduce rattle. Crescent type lock is for double-hung windows. Mounting screws included to match product finish. Mini-pack bagged.
Prime Line F2642 Window Tilt Latch Prime Line F 2554 Sash Lock National Hardware V716 Ball Catch
Spring loaded vinyl tilt latch; used on single or double hung, aluminum windows. Unique wrap-around design attaches to top rail and stile. Fits On: tilt-out window by Better Bilt. Contents: 1 left hand latch; 1 right hand latch; 1 set of installation screws. Cam-type action, with alignment lugs. used on vinyl framed windows. Contents: 1 lock, 1 keeper, 1 set of installation screws. National Hardware Ball Catch, Series: V716, 1 X 2-1/8 in Faceplate, Flush Mounting, Suitable For Use With: French Doors, Single Doors and Cabinets, Steel, Brass
BALL CATCH BRASS 1X2-1/8IN    National Hardware V602 Sash Lock CLIP STORM DOOR ALUM
SASH LOCKS BRASS
Our Price: $5.54
STORM DOOR CLIPS AL
Our Price: $5.54
Used on french doors, single doors and cabinets. Adjustable ball for door gap and latching tension. Replaces existing door bolt and strike. Screw holes are countersunk for flush mount. Replaces existing door bolt and strike. 1" x 2-1/8" strike plate. National Hardware Sash Lock, Series: V602, Suitable For Use With: Sliding Doors and Windows, Die Cast Zinc, Brass, 2.38 in Overall Length, 2.3 in Overall Width, 0.83 in Overall Depth, Includes: Mounting Screws National Hardware Storm Panel Clip, Series: V1369, 1.12 in Length x 1/2 in Width, Aluminum Tube/Steel Screw, For Securing Windows and Screens to Storm Doors
M-D 78006 Fluted Carpet Trim Prime Line L5649 Retainer Pin Set Prime Line F 2588 Sash Lock
Covers, protects and provides a finished edge. Includes screw nails to secure trim to carpet. Clear plastic with steel pin and retainer sleeve,  used to hold wood window mullion grids onto window frames. They fit into the hole drilled in grid outer frame and the needlepoint holds your grid frame into the window opening. Diecast construction. Baked enamel finish. Used on aluminum or vinyl windows. Alignment lugs prevent shifting of rails during locking. Includes lock, keeper and installation screws.
New York Wire 10117 Roll Wire Screen National Hardware V600 Crescent Rigid Sash Lock National Hardware V600 Crescent Rigid Sash Lock
SASH LOCKS STN NCKL
Our Price: $5.87
Strong and durable, 18 x 16 mesh, 0.011 diameter screening. Protective finish prevents corrosion, strengthens weave, and enhances appearance. Resists rust and will not sag. Used by contractors and Do-It-Yourselfers.  Ready rolls enough to cover 2 average size windows or 1 average size screen door. Economy rolls enough to cover 6 average size windows or 3 average size screen doors, plus screening left over. National Hardware Sash Lock, Crescent, Rigid, Series: V600, Suitable For Use With: Double-Hung Windows, Die Cast Zinc, Oil Rubbed Bronze, 1.68 in Overall Length, 2.45 in Overall Width, 0.62 in Overall Depth, Includes: Mounting Screws National Hardware Sash Lock, Crescent, Rigid, Series: V600, Suitable For Use With: Double-Hung Windows, Die Cast Zinc, Satin Nickel, 1.68 in Overall Length, 2.45 in Overall Width, 0.62 in Overall Depth, Includes: Mounting Screws
BALL CATCH STN NKL 1X2-1/8IN  Prime Line PL 7894 Window Screen Clip BALL CATCH DBL 2IN BRASS
Used on french doors, single doors and cabinets. Adjustable ball for door gap and latching tension. Replaces existing door bolt and strike. Screw holes are countersunk for flush mount. Replaces existing door bolt and strike. 1" x 2-1/8" strike plate. Use to attach screen to window opening. Includes 12 clips and No. 8 Phillips pan head sheet metal screws for clips 1/4" and smaller - No. 10-24 Phillips pan head machine screws for clips 5/16" and larger.
Frost King H1591FB3 Fluted Carpet Bar M-D 79004 Fluted Carpet Trim National Hardware V1367 Screen Door Catch
Joins carpet with other types of flooring at a lower height. Covers seams and spaces. Covers, protects and provides a finished edge. Includes screw nails to secure trim to carpet. National Hardware Screen Door Catch, Series: V1367, 2.4 in Overall Width, 2.38 in Overall Height, 2.64 in Overall Depth, Steel With Rubber Roller, Zinc Plated, BHMA A138.18, For Screen and Storm Doors Shut
BALL CATCH POL-BRASS 2-1/8IN  BALL CATCH SATIN NCKL 2-1/8IN BALL CATCH ORB BRONZE 2-1/8IN
Used on french doors, single doors and cabinets. Adjustable ball for door gap and latching tension. Replaces existing door bolt and strike. Screw holes are countersunk for flush mount. 2-1/8". Used on french doors, single doors and cabinets. Adjustable ball for door gap and latching tension. Replaces existing door bolt and strike. Screw holes are countersunk for flush mount. 2-1/8". Used on french doors, single doors and cabinets. Adjustable ball for door gap and latching tension. Replaces existing door bolt and strike. Screw holes are countersunk for flush mount. 2-1/8".
BALL CATCH ANT BRZ 1X2-1/8IN  Prime Line PL 7900 Window Screen Clip National Hardware V602 Cam Sash Lock
SASH LOCKS WHITE
Our Price: $6.34
Used on french doors, single doors and cabinets. Adjustable ball for door gap and latching tension. Replaces existing door bolt and strike. Screw holes are countersunk for flush mount. Replaces existing door bolt and strike. 1" x 2-1/8" strike plate. Use to attach screen to window opening. Includes 12 clips and No. 8 Phillips pan head sheet metal screws for clips 1/4" and smaller - No. 10-24 Phillips pan head machine screws for clips 5/16" and larger. National Hardware Sash Lock, Cam, Series: V602, Suitable For Use With: Double-Hung and Sliding Windows, Die Cast Zinc, White, 2.83 in Overall Length, 0.83 in Overall Depth, Includes: Mounting Screws
LOCK SASH STN NKL             New York Wire 13117 Screen Wire M-D 78071 Wide Fluted Carpet Trim
SASH LOCKS STN NCKL
Our Price: $6.34
National Hardware Sash Lock, Series: 602, Tight Seal, 0.18 in Dia Mounting Hole, 1-3/4 in Mounting Hole, 0.83 in Overall Length, 2.38 in Overall Height, 2.3 in Overall Width, Steel, Satin Nickel, Includes: (2) Keys and Mounting Screws, For All Wood Double-Hung Windows Strong and durable, 18 x 16 mesh, 0.011 diameter screening. Protective finish prevents corrosion, strengthens weave, and enhances appearance. Resists rust and will not sag. Used by contractors and Do-It-Yourselfers.  Ready rolls enough to cover 2 average size windows or 1 average size screen door. Economy rolls enough to cover 6 average size windows or 3 average size screen doors, plus screening left over. Covers, protects and provides a finished edge. Includes screw nails to secure trim to carpet.
National Hardware V716 Ball Catch BALL CATCH STN NKL 1X2-1/8IN  BALL CATCH ANT BRZ 1X2-1/8IN
National Hardware Ball Catch, Series: V716, 1 X 2-1/8 in Faceplate, Flush Mounting, Suitable For Use With: French Doors, Single Doors and Cabinets, Steel, Chrome Plated Used on french doors, single doors and cabinets. Adjustable ball for door gap and latching tension. Replaces existing door bolt and strike. Screw holes are countersunk for flush mount. Replaces existing door bolt and strike. 1" x 2-1/8" strike plate. Used on french doors, single doors and cabinets. Adjustable ball for door gap and latching tension. Replaces existing door bolt and strike. Screw holes are countersunk for flush mount. Replaces existing door bolt and strike. 1" x 2-1/8" strike plate.
National Hardware V474 Shutter Hinge Kit BALL CATCH DBL 2IN BRASS      M-D 66092 Wide Smooth Carpet Bar
SHUTTER HINGE KITS BRS
Our Price: $6.42
National Hardware Shutter Hinge Kit, Series: V474, Steel, Brass Covers and protects carpet edges to provide a finished appearance. Includes screw nails to secure trim.
M-D 79053 Fluted Carpet Gripper LOCK SASH BRASS               M-D 79079 Wide Fluted Carpet Trim
SASH LOCKS BRASS
Our Price: $6.96
Fluted carpet gripper with teeth. Secures stretch-in carpet and protects carpet edge. Includes screw nails to secure trim. 1/2"H. National Hardware Sash Lock, Series: VKA821, Keyed, Die-Cast Zinc, Bright Brass, Includes: (2) Keys and Mounting Screws, For All Wood Double-Hung Windows Covers, protects and provides a finished edge. Includes screw nails to secure trim to carpet.
TURNBUTTON GALVINZD STL 1.25IN Schlage 345B3 Adjustable Ball Catch BALL CATCH DBL 2IN SAT NICKEL
Wings are raised slightly above the base. Edges are curved to prevent the button from gouging into the wood. Mounting screws included. Manufactured from cold-rolled steel. Ideal for cabinets and small interior doors. Free rolling ball insures smooth, positive and trouble-free action. Adjustable threaded barrel compensates for various clearances of doors. Packed with screws. 9/16" x 7/8" bore, 1-1/2" x 25/32" strike, 13/32" lip CTC.
M-D 43854 Wide Fluted Carpet Trim M-D 43882 Fluted Carpet Gripper with Teeth BALL CATCH 2-1/8IN SAT NIC
Covers, protects and provides a finished edge. Includes screw nails to secure trim to carpet. Fluted carpet gripper with teeth. Secures stretch-in carpet and protects carpet edge. Includes screw nails to secure trim. 1/2"H. Radius corner strike, 13/16" bore with screws.
BALL CATCH DBL 2IN SAT NICKEL New York Wire 10116 Roll Wire Screen Prime Line U9935 Casement Sash Lock 2 in H
Strong and durable, 18 x 16 mesh, 0.011 diameter screening. Protective finish prevents corrosion, strengthens weave, and enhances appearance. Resists rust and will not sag. Used by contractors and Do-It-Yourselfers.  Ready rolls enough to cover 2 average size windows or 1 average size screen door. Economy rolls enough to cover 6 average size windows or 3 average size screen doors, plus screening left over. Die cast locking handle for old style wood casement windows. Includes 1 lock, 3 keepers for special mounting applications and 1 set for installation screws. Prefix U on factory number denotes new Defender Security packaging.
BALL CATCH 2-1/8IN SAT NICKEL Prime Line PL15138 Tilt Key HOLDER SCREEN DOOR STN CHROME
Radius corner strike, 13/16" bore with screws. Tub/20 Designed to hold screen and storm doors shut. Closing action of door engages catch and releases strong steel spring. Spring tension closes door and holds it in shut position. Steel frame and spring with rubber roller.
Prime Line PL14314 Square Cut Screen Frame Corner Prime Line PL14964 Non Handed Corner Key BALL CATCH DBL 2IN VEN BRNZ
Use with frame nos. PL-14152 thru PL-14160. 3/8" wide window frame. Tub/20
Frost King H113FS/6 Fluted Carpet Bar BALL CATCH 2-1/8IN POL BRS    BALL CATCH 2-1/8IN CHROME
Joins carpet with other types of flooring at a lower height. Covers seams and spaces. Radius corner strike, 13/16" bore with screws. Radius corner strike, 13/16" bore with screws.
BALL CATCH 2-1/8IN VEN BRNZ   M-D 72074 Wide Smooth Carpet Bar BALL CATCH 2-1/8IN VEN BRONZE
Radius corner strike, 13/16" bore with screws. Covers and protects carpet edges to provide a finished appearance. Includes screw nails to secure trim. Radius corner strike, 13/16" bore with screws.
BALL CATCH DBL 2IN VEN BRONZE New York Wire 13116 Screen Wire Frost King H113FB/6 Fluted Carpet Bar
Strong and durable, 18 x 16 mesh, 0.011 diameter screening. Protective finish prevents corrosion, strengthens weave, and enhances appearance. Resists rust and will not sag. Used by contractors and Do-It-Yourselfers.  Ready rolls enough to cover 2 average size windows or 1 average size screen door. Economy rolls enough to cover 6 average size windows or 3 average size screen doors, plus screening left over. Joins carpet with other types of flooring at a lower height. Covers seams and spaces.
Prime Line TH23085 Trimline Cam Lock New York Wire 13105 Screen Wire M-D 78212 Extra Wide Fluted Carpet Trim
High pressure, corrosive resistant. Baked enamel finish. Concealed locking mechanism pulls rails together helping to reduce air infiltration. Alignment lugs prevent side shift of the sash. Lower profile allows maximum sash opening. Contains 1 lock, 1 keeper, and 1 set of installation screws. Strong and durable, 18 x 16 mesh, 0.011 diameter screening. Protective finish prevents corrosion, strengthens weave, and enhances appearance. Resists rust and will not sag. Used by contractors and Do-It-Yourselfers.  Ready rolls enough to cover 2 average size windows or 1 average size screen door. Economy rolls enough to cover 6 average size windows or 3 average size screen doors, plus screening left over. Extra wide carpet trim covers, protects and provides a finished edge. Includes screw nails to secure trim to carpet.
New York Wire 10105 Roll Wire Screen M-D 79244 Extra Wide Fluted Carpet Trim Prime Line PL15040 Non Handed Corner Key
Strong and durable, 18 x 16 mesh, 0.011 diameter screening. Protective finish prevents corrosion, strengthens weave, and enhances appearance. Resists rust and will not sag. Used by contractors and Do-It-Yourselfers.  Ready rolls enough to cover 2 average size windows or 1 average size screen door. Economy rolls enough to cover 6 average size windows or 3 average size screen doors, plus screening left over. Extra wide carpet trim covers, protects and provides a finished edge. Includes screw nails to secure trim to carpet. Used to repair and/or replace damaged or broken corner keys found in storm window frame assemblies. Non-handed.
Prime Line PL15150 Tilt Key M-D 74187 Wide Fluted Carpet Bar M-D 43858 Extra Wide Fluted Carpet Trim
Tub/20 Covers, protects and provides a finished edge. Includes screw nails to secure trim to carpet. Extra wide carpet trim covers, protects and provides a finished edge. Includes screw nails to secure trim to carpet.
Prime Line H-3553 Sash Lock National Hardware V1956 Ball Catch Entrygard II TH23081 Cam Lock
Die cast locking handle for old style wood casement windows. Includes 1 lock, 3 keepers for special mounting applications and 1 set for installation screws. Prefix U on factory number denotes new Defender Security packaging. National Hardware Ball Catch, Series: V1956, 1 X 2-1/8 in Faceplate, Suitable For Use With: French Doors, Single Doors and Cabinets, Solid Brass, Solid Brass High pressure, corrosive resistant. Baked enamel finish. Alignment lugs serve to prevent shifting of rails during locking, also enhances window seal. Includes 1 lock, 1 keeper, and 1 set of installation screws.
Frost King H591FS/6 Fluted Carpet Bar ACORN HOLDBACK SS             Schlage 347B-619 Dual Adjustable Ball Catch
Joins carpet with other types of flooring at a lower height. Covers seams and spaces. Stainless steel material. Includes one holdback, one lag screw, and two #8 x 3/4" stainless steel square head screws for installation. For catch in door installations. Dual adjustment for door clearance and holding strength. Lip strike is designed for mounting in the jamb. Packed with screws. 7/8" x 1-1/4" bore, 2-1/8" x 1-3/8" strike, 7/8" lip CTC.
National Hardware V1977 Sash Lock Frost King H591P/6 Carpet Bar M-D 85290 Carpet Trim
SASH LOCKS SLD BRS
Our Price: $10.09
National Hardware Sash Lock, Series: V1977, Suitable For Use With: Double-Hung and Sliding Windows, Solid Brass, 1.89 in Overall Length, 0.9 in Overall Depth, Includes: Mounting Screws Joins carpet with other types of flooring at a lower height. Covers seams and spaces. Covers and protects carpet edges to provide a finished appearance. Includes screws to secure trim. 5/16"H.
M-D 78139 Fluted Carpet Gripper with Teeth Frost King H591FB/6 Fluted Carpet Bar M-D 78154 Wide Fluted Carpet Trim
Fluted carpet gripper with teeth. Secures stretch-in carpet and protects carpet edge. Includes screw nails to secure trim. 1/2"H. Joins carpet with other types of flooring at a lower height. Covers seams and spaces. Covers, protects and provides a finished edge. Includes screw nails to secure trim to carpet.
Schlage 347B3 Dual Adjustable Ball Catch M-D 79087 Fluted Carpet Trim M-D 78089 Fluted Carpet Trim
For catch in door installations. Dual adjustment for door clearance and holding strength. Lip strike is designed for mounting in the jamb. Packed with screws. 7/8" x 1-1/4" bore, 2-1/8" x 1-3/8" strike, 7/8" lip CTC. Covers, protects and provides a finished edge. Includes screw nails to secure trim to carpet. Covers, protects and provides a finished edge. Includes screw nails to secure trim to carpet.
Prime Line PL14318 Miter Cut Standard Screen Frame Corner M-D 40124 Wide Carpet Trim M-D 40120 Wide Carpet Trim
Miter cut, standard .040 gauge, use with .020 or .025 frame. Covers, protects and provides a finished edge. Includes screw nails to secure trim to carpet. Covers, protects and provides a finished edge. Includes screw nails to secure trim to carpet.
National Hardware V750RM Casement Fastener New York Wire 10107 Roll Wire Screen M-D 79152 Wide Fluted Carpet Trim
CASEMENT FASTENERS BRS
Our Price: $11.00
National Hardware Casement Fastener, Series: V750RM, Steel With Die Cast, Brass, Includes: Rim and Mortise Strikes Strong and durable, 18 x 16 mesh, 0.011 diameter screening. Protective finish prevents corrosion, strengthens weave, and enhances appearance. Resists rust and will not sag. Used by contractors and Do-It-Yourselfers.  Ready rolls enough to cover 2 average size windows or 1 average size screen door. Economy rolls enough to cover 6 average size windows or 3 average size screen doors, plus screening left over. Covers, protects and provides a finished edge. Includes screw nails to secure trim to carpet.
LOCK SASH SOLID BRASS         M-D 66084 Extra Wide Smooth Carpet Bar M-D 79137 Fluted Carpet Gripper
SASH LOCKS SLD BRS
Our Price: $11.31
Draws window frames together to reduce rattle. Crescent type lock is for double-hung windows. Mounting screws included. Adds security. Covers and protects carpet edges to provide a finished appearance. Includes screw nails to secure trim. Fluted carpet gripper with teeth. Secures stretch-in carpet and protects carpet edge. Includes screw nails to secure trim. 1/2"H.
Frost King H591HG/6 Carpet Bar National Hardware V1976 Crescent Sash Lock M-D 43856 Wide Fluted Carpet Trim
SASH LOCKS SLD BRS
Our Price: $11.79
Joins carpet with other types of flooring at a lower height. Covers seams and spaces. National Hardware Sash Lock, Crescent, Series: V1976, Suitable For Use With: Double-Hung Windows, Solid Brass, 1.13 in Overall Length, 0.79 in Overall Depth, Includes: Mounting Screws Covers, protects and provides a finished edge. Includes screw nails to secure trim to carpet.
M-D 66472 Wide Smooth Carpet Trim M-D 85357 Wide Carpet Trim M-D 43886 Fluted Carpet Gripper with Teeth
Covers and protects carpet edges to provide a finished appearance. Includes screw nails to secure trim. Oak trim covers and protects carpet edges to provide a finished appearance. Includes screws to secure trim. 7/16"H. Fluted carpet gripper with teeth. Secures stretch-in carpet and protects carpet edge. Includes screw nails to secure trim. 1/2"H.
Frost King H1591FB6 Fluted Carpet Bar Prime Line PL14330 Miter Cut Screen Frame Prime Line PL7812 Screen Frame Kit
Joins carpet with other types of flooring at a lower height. Covers seams and spaces. Aluminum lip frame corners. Contains everything needed to make a screen frame that will accept aluminum, fiberglass mesh screen, or flexible poly film. Square frame pieces cut with a hacksaw. Includes frame, spline for retaining screen in frame, 4 Quickie Corners, and instructions. SCREEN NOT INCLUDED.
Prime Line PL7803 Screen Frame Kit New York Wire 13107 Screen Wire CLIP SCREEN 1/16 GREY PLASTIC
Contains everything needed to make a screen frame that will accept aluminum, fiberglass mesh screen, or flexible poly film. Square frame pieces cut with a hacksaw. Includes frame, spline for retaining screen in frame, 4 Quickie Corners, and instructions. SCREEN NOT INCLUDED. Strong and durable, 18 x 16 mesh, 0.011 diameter screening. Protective finish prevents corrosion, strengthens weave, and enhances appearance. Resists rust and will not sag. Used by contractors and Do-It-Yourselfers.  Ready rolls enough to cover 2 average size windows or 1 average size screen door. Economy rolls enough to cover 6 average size windows or 3 average size screen doors, plus screening left over. Use to attach screen to window opening. Includes 12 clips and Phillips pan-head - No. 8 sheet metal screws for 3/16" and smaller offsets, No. 10-24 machine screws for 5/16" and larger.
CLIP FLUSH STORM DOOR WHITE   M-D 85373 Wide Oak Molding Prime Line F2600 Sash Lock
Use to secure storm panels to storm doors. Includes 8 clips, (8) No.8 x 32" Phillips pan head sheet metal screws. 1/8"W x 3/4"L. Oak trim covers and protects carpet edges to provide a finished appearance. Includes screws to secure trim. 7/16"H. Used on single or double hung windows. Contents: 1 lock; 1 keeper; 1 set of installation screws.
Prime Line PL7804 Screen Frame Kit M-D 78220 Extra Wide Fluted Carpet Trim M-D 72256 Smooth Carpet Bar
Contains everything needed to make a screen frame that will accept aluminum, fiberglass mesh screen, or flexible poly film. Square frame pieces cut with a hacksaw. Includes frame, spline for retaining screen in frame, 4 Quickie Corners, and instructions. SCREEN NOT INCLUDED. Extra wide carpet trim covers, protects and provides a finished edge. Includes screw nails to secure trim to carpet. Covers and protects carpet edges to provide a finished appearance. Includes screw nails to secure trim.
M-D 43860 Extra Wide Fluted Carpet Trim M-D 78188 Fluted Carpet Bar Schlage 07MB-605 Sash Crescent Lock
Extra wide carpet trim covers, protects and provides a finished edge. Includes screw nails to secure trim to carpet. Covers, protects and provides a finished edge. Includes screw nails to secure trim to carpet. Lock base: 15/16" x 2-5/8"; strike: 5/8" x 2-5/8".
M-D 74336 Wide Fluted Carpet Bar M-D 31215 T-Style Vinyl Divider with Metal Track M-D 79251 Extra Wide Fluted Carpet Trim
Covers, protects and provides a finished edge. Includes screw nails to secure trim to carpet. Divider for stairs and floor transitions, with metal track. Extra wide carpet trim covers, protects and provides a finished edge. Includes screw nails to secure trim to carpet.
Prime Line U 9809 Window Lock M-D 85415 Extra Wide Carpet Trim Prime Line TH23056 Sash Lock
For vinyl windows only. Adjustable jaw fits all vinyl frame rail thicknesses from 1/16" up to 1/2 in. thick. "Vise like" grip holds securely and will not mar inside frame. Allows window to lock in ventilating position; cam style locking lever; no tools required. Oak trim covers and protects carpet edges to provide a finished appearance. Includes screws to secure trim. 5/8"H. Painted and plated high pressure diecast case and handle. Painted steel backplate, keeper and locking cam; low profile design requires only a 5/8" stop thickness. Includes 1 lock, 1 keeper and 1 set of installations screws
Prime Line PL7813 Screen Frame Kit