Home > HARDWARE > WINDOW & DOOR HARDWARE > WINDOW HARDWARE > CASEMENT HANDLES
Sort By:
1
PULL ZINC PLATED 4-3/4IN      DOOR PULL 4-3/4IN SATIN BRASS DOOR PULL 4-3/4IN ZINC PLATED
PULLS 4-3/4IN ZN PLT
Our Price: $1.09
Fits a variety of applications. Offers attractive, easy-grip design. Rounded contour for comfort and appearance. Mounting screws included. Bagged. Use as a door or cabinet pull. Screws included. Use as a door or cabinet pull. Screws included.
DOOR PULL 4-3/4IN GALVANIZED  PULL ZINC PLATED 4-3/4IN      National Hardware V200 Door Pull
PULLS 4-3/4IN ZN PLT
Our Price: $2.50
PULLS 4-3/4IN ZN PLT
Our Price: $2.59
Use as a door or cabinet pull. Screws included. Fits a variety of applications. Offers attractive, easy-grip design. Rounded contour for comfort and appearance. Mounting screws included. Bagged. National Hardware Door Pull, Series: V200, Fasteners: Screws, 4-3/4 in Length, Steel, Zinc Plated, BHMA A138.18
Frost King DS101BH Self-Stick Door Sweep TURN BUTTON FULL 1-3/4IN ZINC M-D 04226 T-Section Door Bottom
Self-adheres to all types of doors. 1-1/2"H. Holds screen and storm panels in place. Includes screws. A vinyl replacement for aluminum storm doors.
M-D 04242 Y-Section Door Bottom PULL UTILITY ZN PLT 6-1/2IN   Frost King T94H Weatherseal Tape
A vinyl replacement for aluminum storm doors. For use on metal or wood doors. The large size is for added hand clearance. Fits a variety of applications. Screws included. Boxed loose. Cold weather formula allows use as low as negative ten degrees fahrenheit. Use to install plastic storm windows and seal air leaks.
PULL BRASS 4-3/4IN            PULL BLACK 4-3/4IN            National Hardware V83 Weather Resistant Half Turn Button
PULLS 4-3/4IN BRS
Our Price: $3.00
PULLS 4-3/4IN BLK
Our Price: $3.00
TURN BUTTONS ZN PLT
Our Price: $3.00
Fits a variety of applications. Offers attractive, easy-grip design. Rounded contour for comfort and appearance. Mounting screws included. Bagged. Fits a variety of applications. Offers attractive, easy-grip design. Rounded contour for comfort and appearance. Mounting screws included. Bagged. National Hardware Half Turn Button, Weather Resistant, Series: V83, Cold Rolled Steel, Zinc Plated, 1.27 in Length, Includes: Mounting Screws, BHMA A138.18, 1/2 in Size, For Complete Support of Window With Minimal Space Requirements
National Hardware V200 Door Pull National Hardware V200 Door Pull SASH LIFT ZINC DIECAST POL BRS
PULLS 4-3/4IN BRS
Our Price: $3.23
National Hardware Door Pull, Series: V200, Suitable For Use With: Wood Screen Doors, Drawers and Cabinets, Fasteners: Screws, 4-3/4 in Length, Steel, Baked Enamel Brass, BHMA A138.18 National Hardware Door Pull, Series: V200, Fasteners: Screws, 4-3/4 in Length, Steel, Brass, BHMA A138.18 Sash Lift with 3-7/8?L x 1-3/16?W x 1-1/16?H. Screws included.
National Hardware V83 Weather Resistant Full Turn Button National Hardware V200 Door Pull SASH LIFT ZINC DIECAST CHROME
PULLS 4-3/4IN BLK
Our Price: $3.39
National Hardware Full Turn Button, Weather Resistant, Series: V83, Cold Rolled Steel, Zinc Plated, 1.71 in Length, Includes: Mounting Screws, BHMA A138.18, 1-3/4 in Size, For Window Support National Hardware Door Pull, Series: V200, Suitable For Use With: Wood Screen Doors, Drawers and Cabinets, Fasteners: Screws, 4-3/4 in Length, Steel, Black, BHMA A138.18 Sash Lift with 3-7/8?L x 1-3/16?W x 1-1/16?H. Screws included.
SASH LIFT ZINC DIECAST BLACK  Frost King DS101WH Self-Stick Door Sweep DOOR PULL 4-3/4IN WHITE COATED
Sash Lift with 3-7/8?L x 1-3/16?W x 1-1/16?H. Screws included. Self-adheres to all types of doors. 1-1/2"H. Use as a door or cabinet pull. Screws included.
DOOR PULL 4-3/4IN BLACK COATED DOOR/UTILITY PULL 5-3/4IN ZINC SASH LIFT ZINC DIECAST WHITE
Use as a door or cabinet pull. Screws included. Use as a door, drawer, or cabinet pull, or as a sash lift. Sash Lift with 3-7/8?L x 1-3/16?W x 1-1/16?H. Screws included.
National Hardware V170 Sash Pull Lift PULL DOOR ZINC PLATED 6-1/2IN DOOR/UTILITY PULL 6-1/2IN ZINC
SASH LIFTS 4IN ZN PLT
Our Price: $3.71
National Hardware Sash Pull Lift, Series: V170, Suitable For Use With: Windows, Cabinets, Doors and Drawers, 4 in Length, 1.11 in Width, 1.1 in Depth, Steel, Zinc Plated Manufactured of hot-rolled steel. For use on metal or wood doors. Designed as a universal handle. Rugged design for a variety of applications. Bagged. Use as a door, drawer, or cabinet pull, or as a sash lift.
DOOR/UTILI PULL 5-3/4 DICHROMA National Hardware N100-115 Door Pull Prime Line H 3534 Operator Crank Handle
Use as a door, drawer, or cabinet pull, or as a sash lift. National Hardware Door Pull, Universal, Series: V4, Suitable For Use With: Metal and Wood Doors, Fasteners: Screws, 0.26 in Diameter, 6-1/2 in Length, 0.906 in Width, 1.26 in Depth, 0.2 in Thickness Grip, Hot Rolled Steel, Zinc Plated, BHMA A138.18 This crank style offers excellent torque for easy opening and closing of the window.
Prime Line H-3531 Swivel Crank Handle Prime Line H-3533 Swivel Crank handle SASH LIFT ZINC DIECAST VEN BRZ
This crank style offers excellent torque for easy opening and closing of the window. This crank style offers excellent torque for easy opening and closing of the window. Sash Lift with 3-7/8?L x 1-3/16?W x 1-1/16?H. Screws included.
Prime Line H 3532 Window Operator Handle PULL GALV 4-3/4IN             DOOR/UTILITY PULL 5-3/4IN BLK
PULLS 4-3/4IN GALV
Our Price: $4.00
This crank style offers excellent torque for easy opening and closing of the window. Fits a variety of applications. Offers attractive, easy-grip design. Rounded contour for comfort and appearance. Mounting screws included. Bagged. Use as a door, drawer, or cabinet pull, or as a sash lift.
National Hardware V170 Sash Pull Lift PULL UTILITY ZN PLT 5-3/4IN   M-D 03376 Turbine Vent Cover with Tie Strings
SASH LIFTS 4IN BRS
Our Price: $4.06
National Hardware Sash Pull Lift, Series: V170, Suitable For Use With: Windows, Cabinets, Doors and Drawers, 4 in Length, 1.11 in Width, 1.1 in Depth, Steel, Brass For use on metal or wood doors. Fits a variety of applications. Screws included for installation. Bagged. Heavy-duty polyethylene, use for 12" & 14" turbines, .005" thickness fastens on with string.
National Hardware V172 Door Pull Frost King A54/36H Door Sweep National Hardware V170 Sash Pull Lift
SASH LIFTS 4IN NICKEL
Our Price: $4.26
National Hardware Door Pull, Series: V172, Suitable For Use With: Metal and Wood Doors, Fasteners: Screws, 0.156 in Diameter, 5.49 in Length, 1-1/2 in Width, Steel, Zinc Plated, BHMA A138.18, For General Use Seals out drafts and dust. 1-1/4"H. National Hardware Sash Pull Lift, Series: V170, Suitable For Use With: Windows, Cabinets, Doors and Drawers, 4 in Length, 1.11 in Width, 1.1 in Depth, Steel, Nickel Plated
National Hardware V170 Bar Sash Pull Lift TURN BUTTON HALF 1-1/4IN GALV Prime Line U 9132 Magnetic Bullet Catch
SASH LIFTS 4IN ANT BRS
Our Price: $4.26
National Hardware Sash Pull Lift, Bar, Series: V170, Suitable For Use With: Windows, Cabinets, Doors and Drawers, 4 in Length, 1.11 in Width, 1.1 in Depth, Steel, Antique Brass Diecast, plated bullet catch for use on interior closet doors and other utility doors.
Prime Line H-3686 Swivel Crank Handle CATCH BALL DRIVE-IN ORB       CATCH BALL DRIVE-IN POL BRSS
CATCH BALL DRIVE-IN ORB
Our Price: $4.36
This crank style offers excellent torque for easy opening and closing of the window. For use in wood, metal closet or cabinet doors. Adjustable tension, includes fasteners for quick and easy installation. For use in wood, metal closet or cabinet doors. Adjustable tension, includes fasteners for quick and easy installation.
CATCH BALL DRIVE-IN SAT NKL   CATCH BALL DRIVE-IN ANTBRS STL BALL CATCH STN CHM
For use in wood, metal closet or cabinet doors. Adjustable tension, includes fasteners for quick and easy installation. For use in wood, metal closet or cabinet doors. Adjustable tension, includes fasteners for quick and easy installation. For use in wood, metal closet or cabinet doors. Adjustable tension. Includes fasteners for quick and easy installation.
PULL UTILITY ZN PLT 6-1/2IN   National Hardware V170 Window Sash Lift PULL DOOR ZINC PLATED 6-3/4IN
SASH LIFTS 4IN WHT
Our Price: $4.47
For use on metal or wood doors. Fits a variety of applications. Screws included for installation. Bagged. National Hardware Window Sash Lift, Series: V170, Suitable For Use With: Windows, Cabinets, Doors and Drawers, Steel, White, 4 in Length X 1.11 in Width X 1.1 in Height, Includes: Screws, 0.16 in Diameter Mounting Hole Size For use on metal or wood doors.  An attractive finished look for metal buildings. Four screw or carriage bolt holes for excellent holding power. Large size for added hand clearance. Bagged.
National Hardware V171 Door Pull M-D 05629 Economy Door Sweep LIFT SASH BRASS 4IN
National Hardware Door Pull, Series: V171, Suitable For Use With: Metal and Wood Doors, Fasteners: Screws, 0.187 in Diameter, 6-1/2 in Length, 1-3/4 in Width, 1.62 in Depth, 0.81 in Width X 0.46 in Thickness Grip, Steel, Zinc Plated, BHMA A138.18 Seals bottom of door keeping out dirt and drafts. Slotted holes for adjustment. 1-3/8"H. Bar-type pull/lift designed for windows, cabinets, doors, drawers, etc. Offers attractive, easy-grip design. Fits a variety of applications. 4" length. Visual-pack.
Prime Line H 3685 Window Operator Handle LIFT SASH STN NKL 4IN         PULL UTILITY BRASS 5-3/4IN
This crank style offers excellent torque for easy opening and closing of the window. Bar-type pull/lift designed for windows, cabinets, doors, drawers, etc. Offers attractive, easy-grip design. Fits a variety of applications. 4" length. Visual-pack. For use on metal or wood doors. Fits a variety of applications. Screws included for installation. Bagged.
National Hardware V172 Door Pull National Hardware MPB173 Sash Pull Lift LIFT SASH BRASS 4IN
SASH LIFTS 4IN ORB
Our Price: $5.10
National Hardware Door Pull, Series: V172, Suitable For Use With: Metal and Wood Doors, Fasteners: Screws, 0.156 in Diameter, 5.49 in Length, 1-1/2 in Width, Steel, Black, BHMA A138.18, For General Use National Hardware Sash Pull Lift, Series: MPB173, Suitable For Use With: Windows, Cabinets, Doors and Drawers, 4 in Length, 1.203 in Width, 1.062 in Depth, Die Cast, Oil Rubbed Bronze Bar-type pull/lift designed for windows, cabinets, doors, drawers, etc. Offers attractive, easy-grip design. Fits a variety of applications. 4" length. Visual-pack.
LIFT SASH STN NKL 4IN         M-D 5603 Door Sweep M-D 5587 Door Sweep
Bar-type pull/lift designed for windows, cabinets, doors, drawers, etc. Offers attractive, easy-grip design. Fits a variety of applications. 4" length. Visual-pack. Rigid vinyl with soft vinyl sweep. Sticks to all doors. Flexible to compensate for carpet or uneven doors. 1-1/2"H. Rigid vinyl with soft vinyl sweep. Sticks to all doors. Flexible to compensate for carpet or uneven doors. 1-1/2"H.
National Hardware V172 Door Pull National Hardware V135 Sash Lift Hook LIFT SASH CHM 4IN
SASH LIFTS STN NCKL
Our Price: $5.44
National Hardware Door Pull, Series: V172, Suitable For Use With: Metal and Wood Doors, Fasteners: Screws, 0.156 in Diameter, 5.49 in Length, 1-1/2 in Width, Steel, Brass, BHMA A138.18, For General Use National Hardware Sash Lift Hook, Series: V135, Suitable For Use With: Double-Hung and Sliding Windows, Small Doors, Steel, Satin Nickel, 1.66 in Length X 0.76 in Width X 1.35 in Height, Includes: Mounting Screws, 0.19 in Diameter Mounting Hole Size Bar-type pull/lift designed for windows, cabinets, doors, drawers, etc. Offers attractive, easy-grip design. Fits a variety of applications. 4" length. Visual-pack.
National Hardware V135 Sash Lift Hook National Hardware V171 Door Pull National Hardware V716 Ball Catch
SASH LIFTS BRASS
Our Price: $5.44
National Hardware Sash Lift Hook, Series: V135, Suitable For Use With: Double-Hung, Sliding Windows and Small Doors, Steel, Brass, 1.66 in Length X 0.76 in Width X 1.35 in Height, Includes: Mounting Screws, 0.19 in Diameter Mounting Hole National Hardware Door Pull, Series: V171, Suitable For Use With: Metal and Wood Doors, Fasteners: Screws, 0.187 in Diameter, 6-1/2 in Length, 1-3/4 in Width, 1.62 in Depth, 0.81 in Width X 0.46 in Thickness Grip, Steel, Black, BHMA A138.18 National Hardware Ball Catch, Series: V716, 1 X 2-1/8 in Faceplate, Flush Mounting, Suitable For Use With: French Doors, Single Doors and Cabinets, Steel, Brass
BALL CATCH BRASS 1X2-1/8IN    LIFT SASH ORB 4IN             LIFT SASH WHITE 4IN
Used on french doors, single doors and cabinets. Adjustable ball for door gap and latching tension. Replaces existing door bolt and strike. Screw holes are countersunk for flush mount. Replaces existing door bolt and strike. 1" x 2-1/8" strike plate. Bar-type pull/lift designed for windows, cabinets, doors, drawers, etc. Offers attractive, easy-grip design. Fits a variety of applications. 4" length. Visual-pack. Bar-type pull/lift designed for windows, cabinets, doors, drawers, etc. Offers attractive, easy-grip design. Fits a variety of applications. 4" length. Visual-pack.
LIFT SASH BRASS 4IN           National Hardware V173 Sash Pull Lift Frost King AC2H Outside Air Conditioner Cover
SASH LIFTS 4IN STN NCKL
Our Price: $5.59
Bar-type pull/lift designed for windows, cabinets, doors, drawers, etc. Offers attractive, easy-grip design. Fits a variety of applications. 4" length. Visual-pack. National Hardware Sash Pull Lift, Series: V173, Suitable For Use With: Windows, Cabinets, Doors and Drawers, 4 in Length, 1.203 in Width, 1.062 in Depth, Die Cast, Satin Nickel Heavy-duty reinforced 6mm polyethylene helps protect air conditioning units from damage caused by winter conditions. Reduces drafts and heat loss. Comes with elastic strap for a tight, secure fit. Will not crack or mildew.
DOOR/UTILITY PULL 6-1/2IN GALV New York Wire 10117 Roll Wire Screen National Hardware V172 Door Pull
Use as a door, drawer, or cabinet pull, or as a sash lift. Strong and durable, 18 x 16 mesh, 0.011 diameter screening. Protective finish prevents corrosion, strengthens weave, and enhances appearance. Resists rust and will not sag. Used by contractors and Do-It-Yourselfers.  Ready rolls enough to cover 2 average size windows or 1 average size screen door. Economy rolls enough to cover 6 average size windows or 3 average size screen doors, plus screening left over. National Hardware Door Pull, Series: V172, Suitable For Use With: Metal and Wood Doors, Fasteners: Screws, 0.156 in Diameter, 5.49 in Length, 1-1/2 in Width, Steel, White, BHMA A138.18, For General Use
BALL CATCH STN NKL 1X2-1/8IN  National Hardware V171 Door Pull BALL CATCH DBL 2IN BRASS
Used on french doors, single doors and cabinets. Adjustable ball for door gap and latching tension. Replaces existing door bolt and strike. Screw holes are countersunk for flush mount. Replaces existing door bolt and strike. 1" x 2-1/8" strike plate. National Hardware Door Pull, Series: V171, Suitable For Use With: Metal and Wood Doors, Fasteners: Screws, 0.187 in Diameter, 6-1/2 in Length, 1-3/4 in Width, 1.62 in Depth, 0.81 in Width X 0.46 in Thickness Grip, Steel, Brass, BHMA A138.18
National Hardware V1971 Sash Pull Lift Prime Line H-3966 Swivel Bell Base Crank Handle BALL CATCH POL-BRASS 2-1/8IN
SASH LIFTS 4IN SLD BRS
Our Price: $6.23
National Hardware Sash Pull Lift, Series: V1971, Suitable For Use With: Drawer and Cabinet, 4 in Length, 1.03 in Width, 0.97 in Depth, Solid Brass, Includes: Mounting Screws Swivel style crank handle. Used on Andersen brand casement window operators. Large bell base fits operator cover shape. 3/8" spline size Used on french doors, single doors and cabinets. Adjustable ball for door gap and latching tension. Replaces existing door bolt and strike. Screw holes are countersunk for flush mount. 2-1/8".
BALL CATCH SATIN NCKL 2-1/8IN BALL CATCH ORB BRONZE 2-1/8IN BALL CATCH ANT BRZ 1X2-1/8IN
Used on french doors, single doors and cabinets. Adjustable ball for door gap and latching tension. Replaces existing door bolt and strike. Screw holes are countersunk for flush mount. 2-1/8". Used on french doors, single doors and cabinets. Adjustable ball for door gap and latching tension. Replaces existing door bolt and strike. Screw holes are countersunk for flush mount. 2-1/8". Used on french doors, single doors and cabinets. Adjustable ball for door gap and latching tension. Replaces existing door bolt and strike. Screw holes are countersunk for flush mount. Replaces existing door bolt and strike. 1" x 2-1/8" strike plate.
New York Wire 13117 Screen Wire Frost King A59/36H Door Sweep National Hardware N243-907 Door Pull
DOOR PULLS 6-1/2IN GALV
Our Price: $6.42
Strong and durable, 18 x 16 mesh, 0.011 diameter screening. Protective finish prevents corrosion, strengthens weave, and enhances appearance. Resists rust and will not sag. Used by contractors and Do-It-Yourselfers.  Ready rolls enough to cover 2 average size windows or 1 average size screen door. Economy rolls enough to cover 6 average size windows or 3 average size screen doors, plus screening left over. Screw-on door sweep seals drafts at bottom of door. National Hardware Door Pull, Universal, Series: V4, Suitable For Use With: Metal and Wood Doors, Fasteners: Screws, 0.26 in Diameter, 6-1/2 in Length, 0.906 in Width, 1.26 in Depth, 0.2 in Thickness Grip, Hot Rolled Steel, Galvanized, BHMA A138.18
National Hardware V716 Ball Catch BALL CATCH STN NKL 1X2-1/8IN  BALL CATCH ANT BRZ 1X2-1/8IN
National Hardware Ball Catch, Series: V716, 1 X 2-1/8 in Faceplate, Flush Mounting, Suitable For Use With: French Doors, Single Doors and Cabinets, Steel, Chrome Plated Used on french doors, single doors and cabinets. Adjustable ball for door gap and latching tension. Replaces existing door bolt and strike. Screw holes are countersunk for flush mount. Replaces existing door bolt and strike. 1" x 2-1/8" strike plate. Used on french doors, single doors and cabinets. Adjustable ball for door gap and latching tension. Replaces existing door bolt and strike. Screw holes are countersunk for flush mount. Replaces existing door bolt and strike. 1" x 2-1/8" strike plate.
HANDLE WINDOW CSMT BRNZ       National Hardware V474 Shutter Hinge Kit Frost King W59/36H Door Sweep
SHUTTER HINGE KITS BRS
Our Price: $6.42
Visual-pack. National Hardware Shutter Hinge Kit, Series: V474, Steel, Brass Screw-on door sweep seals drafts at bottom of door.
M-D 04630 Adhesive Transparent Weatherstrip Prime-Line H 4106 Lever Swivel Window Crank Handle M-D 05082 Triple Fin Door Sweep
Polyethylene tape can be cut to length then applied directly around cracks or gaps around window frame. Heavy-duty tape for sealing air and moisture leaks around windows. Swivel style crank handle. Used on Andersen brand casement window operators. Large bell base fits operator cover shape. 3/8" spline size Triple fin vinyl seal provides superior weathertight seal for uneven floor surfaces. Slotted holes for adjustment. 1-1/4"H.
BALL CATCH DBL 2IN BRASS      PULL UTILITY GALV 5-3/4IN     M-D 05090 Triple Fin Door Sweep
National Hardware Door Pull, Series: V172, Suitable For Use With: Metal or Wood Doors, 0.156 in Diameter, 5-3/4 in Length, 1-1/2 in Width, 1.34 in Depth, 0.17 in Plate, Steel, Galvanized, Includes: Screws, Standards: BHMA A138.18 Triple fin vinyl seal provides superior weathertight seal for uneven floor surfaces. Slotted holes for adjustment. 1-1/4"H.
M-D 03392 Air Conditioner Cover with Elastic Strap Schlage 345B3 Adjustable Ball Catch BALL CATCH DBL 2IN SAT NICKEL
Durable polyethylene blocks out water, ice, dust and leaves during off season. Ideal for cabinets and small interior doors. Free rolling ball insures smooth, positive and trouble-free action. Adjustable threaded barrel compensates for various clearances of doors. Packed with screws. 9/16" x 7/8" bore, 1-1/2" x 25/32" strike, 13/32" lip CTC.
Prime Line TH22007 Operator Crank Handle 2-9/16 in H x 3-1/2 in W BALL CATCH 2-1/8IN SAT NIC    BALL CATCH DBL 2IN SAT NICKEL
Solid brass knob and diecast handle with baked enamel finish. Fits 11/32" Truth spindles only. Radius corner strike, 13/16" bore with screws.
New York Wire 10116 Roll Wire Screen Frost King C35PH Door Sweep with Nylon Brush Frost King AC3H Outside Air Conditioner Cover
Strong and durable, 18 x 16 mesh, 0.011 diameter screening. Protective finish prevents corrosion, strengthens weave, and enhances appearance. Resists rust and will not sag. Used by contractors and Do-It-Yourselfers.  Ready rolls enough to cover 2 average size windows or 1 average size screen door. Economy rolls enough to cover 6 average size windows or 3 average size screen doors, plus screening left over. Durable plastic with black nylon brush. Heavy-duty reinforced 6mm polyethylene helps protect air conditioning units from damage caused by winter conditions. Reduces drafts and heat loss. Comes with elastic strap for a tight, secure fit. Will not crack or mildew.
PULL DR VYL CTD WHITE 6-3/4IN BALL CATCH 2-1/8IN SAT NICKEL National Hardware V1970 Door Pull
PULLS 4-1/2IN SLD BRS
Our Price: $7.46
For use on metal or wood doors. An attractive finished look for metal buildings. Four screw or carriage bolt holes for excellent holding power. Large size for added hand clearance. Loose barcoded. Radius corner strike, 13/16" bore with screws. National Hardware Door Pull, Series: V1970, Suitable For Use With: Drawers and Doors, 4-1/2 in Length, 1.2 in Width, 1.08 in Depth, Solid Brass
National Hardware V171 Utility Pull M-D Ultra 69612 Door Sweep with Vinyl Seal Frost King B59/36H Door Sweep
National Hardware Utility Pull, Series: V171, Suitable For Use With: Metal and Wood Doors, 6-1/2 in Length, 1-3/4 in Width, 1.62 in Depth, Steel, Galvanized, Includes: Screws 2-1/4"H door sweep with vinyl insert. Screw-on door sweep seals drafts at bottom of door.
BALL CATCH DBL 2IN VEN BRNZ   BALL CATCH 2-1/8IN POL BRS    BALL CATCH 2-1/8IN CHROME
Radius corner strike, 13/16" bore with screws. Radius corner strike, 13/16" bore with screws.
BALL CATCH 2-1/8IN VEN BRNZ   BALL CATCH 2-1/8IN VEN BRONZE BALL CATCH DBL 2IN VEN BRONZE
Radius corner strike, 13/16" bore with screws. Radius corner strike, 13/16" bore with screws.
New York Wire 13116 Screen Wire New York Wire 13105 Screen Wire Prime Line TH22142 T Style Tee Crank Handle
Strong and durable, 18 x 16 mesh, 0.011 diameter screening. Protective finish prevents corrosion, strengthens weave, and enhances appearance. Resists rust and will not sag. Used by contractors and Do-It-Yourselfers.  Ready rolls enough to cover 2 average size windows or 1 average size screen door. Economy rolls enough to cover 6 average size windows or 3 average size screen doors, plus screening left over. Strong and durable, 18 x 16 mesh, 0.011 diameter screening. Protective finish prevents corrosion, strengthens weave, and enhances appearance. Resists rust and will not sag. Used by contractors and Do-It-Yourselfers.  Ready rolls enough to cover 2 average size windows or 1 average size screen door. Economy rolls enough to cover 6 average size windows or 3 average size screen doors, plus screening left over. Die cast zinc handle and knob in baked enamel and plated finishes. Ideal for low profile applications. Snap-on design does not require screws. Fits 11/32" "Truth" spindles only.
New York Wire 10105 Roll Wire Screen Prime Line H-3893 Spline T-Crank Handle Prime Line H-3892 Spline T-Crank Handle
Strong and durable, 18 x 16 mesh, 0.011 diameter screening. Protective finish prevents corrosion, strengthens weave, and enhances appearance. Resists rust and will not sag. Used by contractors and Do-It-Yourselfers.  Ready rolls enough to cover 2 average size windows or 1 average size screen door. Economy rolls enough to cover 6 average size windows or 3 average size screen doors, plus screening left over. Universal design. Inserts allow this to fit most casement operators. Insert sizes: 9/32", 5/16", 3/8", 3/8"(special), and 11/32". Universal design. Inserts allow this to fit most casement operators. Insert sizes: 9/32", 5/16", 3/8", 3/8"(special), and 11/32".
M-D Ultra Door Sweep with Vinyl Seal M-D 50042 Air Conditioner Cover with Elastic Strap M-D 05173 Triple Fin Door Sweep
2-1/4"H door sweep with vinyl insert. Durable polyethylene blocks out water, ice, dust and leaves during off season. Triple fin vinyl seal provides superior weathertight seal for uneven floor surfaces. Slotted holes for adjustment. 1-1/4"H.
M-D 05215 Triple Fin Door Sweep PULL DOOR ZINC PLATED 10IN    National Hardware V1956 Ball Catch
DOOR PULLS 10IN ZN PLT
Our Price: $9.18
Triple fin vinyl seal provides superior weathertight seal for uneven floor surfaces. Slotted holes for adjustment. 1-1/4"H. National Hardware Door Pull, Series: DPB7, Plated, Suitable For Use With: Metal and Wood Doors, 10 in Length, Steel, Zinc-Plated National Hardware Ball Catch, Series: V1956, 1 X 2-1/8 in Faceplate, Suitable For Use With: French Doors, Single Doors and Cabinets, Solid Brass, Solid Brass
Frost King A62/36H Door Sweep Frost King A79/36H Door Sweep ACORN HOLDBACK SS
Seals door from drafts, dirt, and insects. 36" Length. Lifetime warranty. Stainless steel material. Includes one holdback, one lag screw, and two #8 x 3/4" stainless steel square head screws for installation.
M-D Ultra 68726 Door Sweep with Vinyl Insert Frost King AC5H Outside Air Conditioner Cover M-D 87619 Air Conditioner Cover with Elastic Strap
Provides a seal between the door bottom and the threshold, blocking air and moisture. Vinyl insert. UL listed, fire labeled. 1-7/8"H. Heavy-duty reinforced 6mm polyethylene helps protect air conditioning units from damage caused by winter conditions. Reduces drafts and heat loss. Comes with elastic strap for a tight, secure fit. Will not crack or mildew. Durable polyethylene blocks out water, ice, dust and leaves during off season.
M-D 05702 Triple Fin Door Sweep National Hardware V671 Utility Pull Schlage 347B-619 Dual Adjustable Ball Catch
Triple fin vinyl seal provides superior weathertight seal for uneven floor surfaces. Slotted holes for adjustment. 1-1/4"H. National Hardware Utility Pull, Series: V671, Suitable For Use With: Drawers and Doors, 6-1/2 in Length, Stainless Steel, Stainless Steel, BHMA A138.18 For catch in door installations. Dual adjustment for door clearance and holding strength. Lip strike is designed for mounting in the jamb. Packed with screws. 7/8" x 1-1/4" bore, 2-1/8" x 1-3/8" strike, 7/8" lip CTC.
M-D 5389 Deluxe Door Sweep M-D Ultra 69633 Door Sweep with Vinyl Seal Entrygard TH24003 Dual Arm Crank Handle 5-1/4 in L 1-1/8 in W
Vinyl with heavy aluminum construction to create a high quality, long lasting door sweep. Provides a tight long lasting door seal. Seals gaps up to 3/4" high. Slotted holes for easy adjustment. 2"H. 2-1/4"H door sweep with vinyl insert. High impact snap-on cover offers traditional styling and easy replacement. Fits 11/32" drive spline. Cover dimensions: 1-1/8" W x 5-1/4" L.
Entrygard TH24000 Dual Arm Crank Handle 5-1/4 in L 1-1/8 in W Schlage 347B3 Dual Adjustable Ball Catch M-D Ultra 69633 Door Sweep with Vinyl Seal
High impact snap-on cover offers traditional styling and easy replacement. Fits 11/32" drive spline. Cover dimensions: 1-1/8" W x 5-1/4" L. For catch in door installations. Dual adjustment for door clearance and holding strength. Lip strike is designed for mounting in the jamb. Packed with screws. 7/8" x 1-1/4" bore, 2-1/8" x 1-3/8" strike, 7/8" lip CTC. 2-1/4"H door sweep with vinyl insert.
M-D Ultra Door Sweep with Vinyl Seal Flex-O-Matic 07237 Door Sweep with Vinyl Seal Frost King A62/36GAH Door Sweep
2-1/4"H door sweep with vinyl insert. As the door opens, the spring action door sweep automatically raises to clear the carpet. When the door is closed, the door sweep automatically lowers to firmly press against floor or carpet. Seals door from drafts, dirt, and insects. 36" Length.
New York Wire 10107 Roll Wire Screen M-D 43300 Cinch Stick with Vinyl Insert M-D 05769 Door Sweep
Strong and durable, 18 x 16 mesh, 0.011 diameter screening. Protective finish prevents corrosion, strengthens weave, and enhances appearance. Resists rust and will not sag. Used by contractors and Do-It-Yourselfers.  Ready rolls enough to cover 2 average size windows or 1 average size screen door. Economy rolls enough to cover 6 average size windows or 3 average size screen doors, plus screening left over. Seals bottom of door from drafts, dust, water and insects. No need for drills, screws, screwdrivers or pilot holes. Measure, trim, peel and stick. Specially developed with 3M adhesive technology. Vinyl with heavy aluminum construction to create a high quality, long lasting door sweep. Provides a tight long lasting door seal. Seals gaps up to 3/4" high. Slotted holes for easy adjustment. 2"H.
Frost King SB36 Brush Door Sweep Frost King A62/36SN Door Sweep M-D Ultra Door Sweep with Vinyl Seal
Frost King Brush Door Sweep, Premium, 2 in Width, 36 in Length, Aluminum, Silver, For Commercial or Residential Applications Seals door from drafts, dirt, and insects. 36" Length. 2-1/4"H door sweep with vinyl insert.
M-D 6411 Door Sweep M-D 43301 Cinch Stick PULL PLATE 3-1/2X15IN OR BRNZ
Unfinished hardwood door sweep. Triple fin vinyl seal ensures airtight seal. 2"H. Seals bottom of door from drafts, dust, water and insects. No need for drills, screws, screwdrivers or pilot holes. Measure, trim, peel and stick. Specially developed with 3M adhesive technology.
PULL PLATE 3-1/2X15IN SAT NIC M-D 43302 Cinch Stick M-D Ultra Door Sweep with EPDM Rubber Insert
Seals bottom of door from drafts, dust, water and insects. No need for drills, screws, screwdrivers or pilot holes. Measure, trim, peel and stick. Specially developed with 3M adhesive technology. Door sweeps most commonly used on the exterior of out-swinging doors. Made of aluminum and EPDM rubber. Provides a seal between the door bottom and the threshold, blocking air and moisture. UL, fire labeled. 1-3/4"H.
M-D 68247 Bottom Door Sweep M-D 05413 Deluxe Door Sweep M-D 05744 Door Sweep
Door sweeps most commonly used on the exterior of out-swinging doors. Made of aluminum and EPDM rubber. Provides a seal between the door bottom and the threshold, blocking air and moisture. UL, fire labeled. 1-3/4"H. Vinyl with heavy aluminum construction to create a high quality, long lasting door sweep. Provides a tight long lasting door seal. Seals gaps up to 3/4" high. Slotted holes for easy adjustment. 2"H. Vinyl with heavy aluminum construction to create a high quality, long lasting door sweep. Provides a tight long lasting door seal. Seals gaps up to 3/4" high. Slotted holes for easy adjustment. 2"H.
Frost King A62/36W Door Sweep M-D 48996 Deluxe Door Sweep M-D 05652 Deluxe Door Sweep
Seals door from drafts, dirt, and insects. 36" Length. Vinyl with heavy aluminum construction to create a high quality, long lasting door sweep. Provides a tight long lasting door seal. Seals gaps up to 3/4" high. Slotted holes for easy adjustment. 2"H. Vinyl with heavy aluminum construction to create a high quality, long lasting door sweep. Provides a tight long lasting door seal. Seals gaps up to 3/4" high. Slotted holes for easy adjustment. 2"H.
M-D Ultra 69604 Door Sweep with EPDM Rubber Insert New York Wire 13107 Screen Wire M-D 05546 Drip Cap with Vinyl Seal
Door sweeps most commonly used on the exterior of out-swinging doors. Made of aluminum and EPDM rubber. Provides a seal between the door bottom and the threshold, blocking air and moisture. UL, fire labeled. 1-3/4"H. Strong and durable, 18 x 16 mesh, 0.011 diameter screening. Protective finish prevents corrosion, strengthens weave, and enhances appearance. Resists rust and will not sag. Used by contractors and Do-It-Yourselfers.  Ready rolls enough to cover 2 average size windows or 1 average size screen door. Economy rolls enough to cover 6 average size windows or 3 average size screen doors, plus screening left over. DVS drip cap with flap seal to block out air and moisture. Slotted holes for easy adjustment. 1-7/8"H.
Flex-O-Matic 07179 Door Sweep Flexomatic 7153 Door Sweep PULL PLATE 3-1/2X15IN BRT BRS
As the door opens, the spring action door sweep automatically raises to clear the carpet. When the door is closed, the door sweep automatically lowers to firmly press against floor or carpet. As the door opens, the spring action door sweep automatically raises to clear the carpet. When the door is closed, the door sweep automatically lowers to firmly press against floor or carpet.
PULL DOOR ZINC PLATED 10-3/4IN M-D Ultra 25718 Door Sweep with Vinyl Seal Frost King AC9H Indoor Quilted Air Conditioner Cover
For use on metal or wood doors. Rolled design for added strength. Six screw or carriage bolt holes for excellent holding power. Large size for added hand clearance. Bagged. 2-1/4"H door sweep with vinyl insert. Plastic liner stops drafts, keeps out dust and dirt. Fabric cover is machine washable. Includes one cover, one liner, and installation tape.
Schlage C8400PA28 Kick Plate KICK PLATE 6X30IN OR BRONZE   KICK PLATE 6X30IN SAT NICKEL
Protects interior or exterior door surface. With screws. Use To Protect Door. Use To Protect Door.
Frost King A82/36H Door Sweep CLIP DBL WING FLUSH ZINC PLATE Prime Line H-3711 Right Hand Square Casement Operator
Seals door from drafts, dirt, and insects. 36" Length. Double wing clip is designed to hold window screens into sliding window frames; for narrow rail applications with 2 adjacent screens. Used on steel-framed windows. Worm gear mechanism driven. Includes operator with 9"L steel arm and 3/8" diameter spindle, crank handle, and set of installation screws. Hand determined by window hinge location from inside home looking out.
M-D Ultra 69609 Door Sweep with EPDM Rubber Insert Schlage C8400PA28 Kick Plate Frost King AC11H Indoor Air Conditioner Cover
Door sweeps most commonly used on the exterior of out-swinging doors. Made of aluminum and EPDM rubber. Provides a seal between the door bottom and the threshold, blocking air and moisture. UL, fire labeled. 1-3/4"H. Protects interior or exterior door surface. With screws. Plastic liner stops drafts, keeps out dust and dirt. Fabric cover is machine washable. Includes one cover, one liner, and installation tape.
National Hardware V1955 Shutter Bar Kit KICK PLATE 6X30IN BRT BRASS   Frost King CC36XH Rectangle Air Conditioner Cover
SHUTTER BAR KITS SLD BRS
Our Price: $16.90
National Hardware Shutter Bar Kit, Series: V1955, Brass, Solid Brass, Includes: Bar Latch and (2) Screws-in-Pulls, For used to secure shutters and cabinet doors Use To Protect Door. Tall made of reinforced vinyl tarp material with tie-down straps. Protects unit from weather damage. Elastic strap provides a sure fit. Will not crack or mildew.
Prime Line TH22253 Folding Crank Handle 2-9/64 in H x 3-3/32 in W PINTEL STAINLESS STEEL 1/2OS  Prime Line H-3710 Left Hand Square Casement Operator
Low profile when folded. The crank handle styling requires less torque to operate window than traditional low-profile handles. Fits 11/32" spline. Stainless steel material. 3.0mm thickness. Includes two pintels and eight #8 x 3" stainless steel square head screws for installation. Used on steel-framed windows. Worm gear mechanism driven. Includes operator with 9"L steel arm and 3/8" diameter spindle, crank handle, and set of installation screws. Hand determined by window hinge location from inside home looking out.
Prime Line H 3514 Square Style Casement Operator 9 in L Prime Line H 3520 Square Style Casement Operator 9 in L Frost King CC32XH Square Air Conditioner Cover
Used on steel-framed windows. Worm gear mechanism driven. Includes operator with 9"L steel arm and 3/8" diameter spindle, crank handle, and set of installation screws. Hand determined by window hinge location from inside home looking out. Used on steel-framed windows. Worm gear mechanism driven. Includes operator with 9"L steel arm and 3/8" diameter spindle, crank handle, and set of installation screws. Hand determined by window hinge location from inside home looking out. Heavy-duty reinforced 9mm polyethylene protects central air conditioning unit from damage by rain, snow, and dirt. Will not crack or mildew. Elastic straps provide secure fit. Reusable annually.
Frost King CC30XH Round Air Conditioner Cover Schlage C8400B3 Kick Plate KICK PLATE 8X34IN OR BRONZE
Heavy-duty reinforced 9mm polyethylene protects central air conditioning unit from damage by rain, snow, and dirt. Will not crack or mildew. Elastic straps provide secure fit. Reusable annually. Protects interior or exterior door surface. With screws. Use To Protect Door.
KICK PLATE 8X34IN SAT NICKEL  Seal-O-Matic 07039 Door Sweep PINTEL STAINLESS STL 1-1/2OS
Use To Protect Door. Weatherproofs and soundproofs. Vinyl bottom raises automatically to clear carpet when door opens. Vinyl bottom lowers automatically to make tight seal when door closes. Stainless steel material. 3.0mm thickness. Includes two pintels and eight #8 x 3" stainless steel square head screws for installation.
PINTEL STAINLESS STL 2-1/2OS  L-HINGE SS 1/2OS BLK          Schlage C8400PA28 Kick Plate
Stainless steel material. 3.0mm thickness. Includes two pintels and eight #8 x 3" stainless steel square head screws for installation. Stainless steel material. 2.5mm thickness. Includes: 2-L hinge and 12 pcs. of #10x7/8"square head screws. Protects interior or exterior door surface. With screws.
Schlage C8311-5PA2835X15G Pull Plate Handle Schlage SC8400PA3 Kick Plate National Hardware V1984 Pull Plate
Pull size 5-1/4" center to center. Protects interior or exterior door surface. With screws. National Hardware Pull Plate, Series: V1984, 15 in Length, 3-1/2 in Width, Aluminum, Brass, Includes: Mounting Screws
PINTEL LAG SCREW BLK FIN SS 4I L-HINGE SS 1-1/2OS BLK        L-HINGE SS 2-1/4OS BLK
Stainless steel material. Includes two lag pintels. Stainless steel material. 2.5mm thickness. Includes: 2-L hinge and 12 pcs. of #10x7/8"square head screws. Stainless steel material. 2.5mm thickness. Includes: 2-L hinge and 12 pcs. of #10x7/8"square head screws.
New York Wire 10205 Screen Wire Schlage C8400 Standard Kick Plate KICK PLATE 8X34IN BRT BRASS
Strong and durable, 18 x 16 mesh, 0.011 diameter screening. Protective finish prevents corrosion, strengthens weave, and enhances appearance. Resists rust and will not sag. Used by contractors and Do-It-Yourselfers.  Ready rolls enough to cover 2 average size windows or 1 average size screen door. Economy rolls enough to cover 6 average size windows or 3 average size screen doors, plus screening left over. Protects interior or exterior door surface. With screws. Use To Protect Door.
M-D 03426 Air Conditioner Cover with Elastic Strap M-D 03772 Air Conditioner Cover with Elastic Strap KICK PLATE 6IN X 30IN
Durable polyethylene blocks out water, ice, dust and leaves during off season. Durable cover protects air conditioner blocking out water, ice, dust and leaves during off season. Door protection kick plate .050 gauge.
Schlage SC8400 Pull Plate New York Wire 13205 Screen Wire Schlage SC8400PA3 Kick Plate
Pull size 5-1/4" center to center. Strong and durable, 18 x 16 mesh, 0.011 diameter screening. Protective finish prevents corrosion, strengthens weave, and enhances appearance. Resists rust and will not sag. Used by contractors and Do-It-Yourselfers.  Ready rolls enough to cover 2 average size windows or 1 average size screen door. Economy rolls enough to cover 6 average size windows or 3 average size screen doors, plus screening left over. Protects interior or exterior door surface. With screws.
BOLT SHUT SLIDE BLK STAIN STL HINGE STRAP 10 BLK SS 2-1/4OS HINGE STRAP BLK SS 10IN 1/2OS
Stainless steel material. 2.0mm base and 6.0mm thickness. Includes one slide bolt and twelve #8 x 3/4" stainless steel square head screws for installation. Stainless steel material. 2.5mm thickness. Includes two strap hinges and twelve stainless steel square head screws for installation. 10" Length. Stainless steel material. 2.5mm thickness. Includes two strap hinges and twelve stainless steel square head screws for installation. 10" Length.
HINGE STRAP 10 BLK SS 1-1/2OS