Home > HARDWARE > WINDOW & DOOR HARDWARE > THRESHOLDS / FLOOR TRIM > SILL NOSING
Sort By:
1
Prime Line M-6014 Swinging Shower Door Catch Prime Line M6001 Round Edge Flat Tub Enclosure Roller Prime Line M 6000 Round Edge Flat Tub Enclosure Roller
1-5/16"W spring-loaded latch assembly for hinged shower doors. 9/16"W x 3/4"L x 1/2"H stainless steel housing with nylon tip. Includes two No.8 x 3/8" Phillips pan head sheet metal screws. Nylon ball bearing roller with threaded hex hub. Contents: 2 rollers with #8-32x3/8 Phillips binder head machine screws. 1/4"W oval-edge nylon ball bearing wheel with 7/16" threaded hex hub. Includes truss head screw.
M-D 65110 Z-Bar Carpet/Floor Edging Prime Line M 6003 Round Edge Flat Tub Enclosure Roller Prime Line M 6002 Round Edge Flat Tub Enclosure Roller
Use to create a finished edge where stretch-in carpeting meets adjacent floors. Install with tackstrip. Attach to tackstrip, roll carpet over edge of Z bar, and tap down. 1/4"W flat-edge nylon ball bearing wheel with 3/8" threaded hex hub. Includes truss head screw. 1/4"W oval-edge nylon ball bearing wheel with 7/16" threaded hex hub. Includes truss head screw.
Danco 64654B Oval Edge Bagged Door Roller Prime Line M-6040 Tee Shape Tip Shower Door Sweep Prime Line M 6058 Door Guide
Ball bearing construction, nylon wheel with 8-32 threaded center hole and 7-16" hub diameter that extends from back 1/8". 5/32" wide x 3/4" tall for use on hinged shower doors. Used by several shower door manufacturers for sliding tub-enclosure doors. 1"L x 1-9/16"W x 5/8"H overall. Fits 7/16" thick door rails.
Prime Line M 6023 Star Shower Door Bottom Seal M-D 21501 Carpet Screw Nail M-D 21485 Carpet Screw Nail
"Star Tip" shaped; for use on hinged shower doors. Carpet screw nails for use with M-D floor trims. Hammer screw nails into wood or concrete floors. Wooden pegs needed for concrete sub-floors. Carpet screw nails for use with M-D floor trims. Hammer screw nails into wood or concrete floors. Wooden pegs needed for concrete sub-floors.
National Hardware V807 Sliding Door Chain Prime Line U 9497 Door Edge Filler Plate Prime Line U 9905 Standard Chain Door Guard
DOOR CHAINS BRS
Our Price: $3.20
National Hardware Door Chain, Sliding, Series: V807, Die Cast Zinc, Brass, For Residential and Apartments Heavy gauge steel mortise hole cover. Used to cover the mortise hole on door edge. Includes 1 plate and 1 set of installation screws. Steel keepers and steel chain secures door while allowing viewing and ventilation. Includes 1 chain lock with keeper and installation screws. Prefix U on factory number denotes new Defender Security packaging.
Prime Line M6067 Door Guide Prime Line U 10533 Standard Chain Door Guard CHAIN DOOR GUARD SATIN CHROME
Injection molded plastic bottom guide fits 7/16" thick door panels. Installed with double sided tape included.  Includes 1 guide. Brass keepers and steel chain secures door while allowing viewing and ventilation. Includes 1 chain lock with keeper and installation screws. Prefix U on factory number denotes new Defender Security packaging. Allows door to be partially opened while still providing security. Screws included.
Prime Line U 9852 Standard Chain Door Guard National Hardware V807 Door Chain National Hardware V807 Sliding Door Chain
DOOR CHAINS CHROME
Our Price: $3.85
Steel keepers and chain. Secures door while allowing viewing and ventilation. Includes 1 chain lock with keeper and installation screws. Prefix U on factory number denotes new Defender Security packaging. National Hardware Door Chain, Series: V807, Suitable For Use With: Wood or Metal Doors, Die Cast Zinc, Satin Chrome, For Residential and Apartments National Hardware Door Chain, Sliding, Series: V807, Die Cast Zinc, Chrome Plated, For Residential and Apartments
Prime-Line M 6211 Shower Door Bottom Seal Frost King H113FS/3 Fluted Carpet Bar Danco 64652B Oval Edge Bagged Door Roller
T-shaped tip, fits into extrusion slot on bottom of swinging shower door to prevent water from leaking onto floor. Joins carpet with other types of flooring at a lower height. Covers seams and spaces. Ball bearing construction, nylon wheel with 8-32 threaded center hole and 7-16" hub diameter that extends from back 1/8".
CHAIN DOOR GUARD POLISH BRASS CHAIN DOOR GUARD VENETN BRONZE Frost King H113FB/3 Fluted Carpet Bar
Allows door to be partially opened while still providing security. Screws included. Allows door to be partially opened while still providing security. Screws included. Joins carpet with other types of flooring at a lower height. Covers seams and spaces.
Prime Line M 6022 Flat Shower Door Bottom Seal Prime Line U 9895 Door Viewer CHAIN DOOR STN NKL
DOOR CHAINS STN NCKL
Our Price: $4.61
For use on hinged shower doors. 160-degree plastic lens viewer, 15/32" bore diameter. Fits 1-3/8" thick wood or metal doors. Easy to install. Provides added security on residential and apartment doors. Allows door to open partially while still proving security. Can be easily installed on either wood or metal doors for installation flexibility. Visual-pack.
Frost King H591FS/3 Fluted Carpet Bar Prime Line U 9516 Hole Cover Plate SECURITY STRIK 1-1/4X3-5/8 BRS
Joins carpet with other types of flooring at a lower height. Covers seams and spaces. Helps maintain entry security. Covers 1/2" to 2-1/8" holes. Fits doors to 1-3/4" thick. Includes cover (2) pieces, (1) #10 x 1" and (1) #10 x 1-1/2" machine screws. Screws included.
Prime Line U 9524 Lock Back Plate Prime Line U 9515 Hole Cover Plate Prime-Line U 10446 Hole Cover Plate
Covers marred doors and allow conversion of 2-3/8" to 2-3/4" backset or 2-3/4" to 2-3/8". Inside diameter 2-1/8", outside diameter 3-1/2". Includes 2  plated covers. Helps maintain entry security. Covers 1/2" to 2-1/8" holes. Fits doors to 1-3/4" thick. Includes cover (2) pieces, (1) #10 x 1" and (1) #10 x 1-1/2" machine screws. Helps maintain entry security. Covers 1/2" to 2-1/8" holes. Fits doors to 1-3/4" thick. Includes cover (2) pieces, (1) #10 x 1" and (1) #10 x 1-1/2" machine screws.
Frost King H591FB/3 Fluted Carpet Bar Frost King H1591FS3 Fluted Carpet Bar SEAL SHOWER DR RUBBER 5/8X38IN
Joins carpet with other types of flooring at a lower height. Covers seams and spaces. Joins carpet with other types of flooring at a lower height. Covers seams and spaces.
SECURITY STRIK 1-1/4X3-5/8 NIC Frost King H4128FS3 Stair Edging M-D 78006 Fluted Carpet Trim
Screws included. Covers and protects the edge of carpeted, wood, or tiled stairs. Reduces wear and tear. Covers, protects and provides a finished edge. Includes screw nails to secure trim to carpet.
Frost King H591P/3 Carpet Bar Prime Line M 6054 Shower Door Roller Assembly Frost King H591HG/3 Carpet Bar
Joins carpet with other types of flooring at a lower height. Covers seams and spaces. Extruded aluminum bracket; 3/4" diameter flat edge, nylon ball bearing roller; thru-glass 1/4" binder post; used on frameless shower doors.Contents: 2 roller assemblies; 2 sets of installation screws. Joins carpet with other types of flooring at a lower height. Covers seams and spaces.
Frost King H1591FB3 Fluted Carpet Bar PLATE HOLE COVER 2-5/8DIA GRAY SECURITY STRIKE 1-1/8X6 BRASS
Joins carpet with other types of flooring at a lower height. Covers seams and spaces. Screws included. Fits 1-3/8" to 2" doors. Screws included.
M-D 79004 Fluted Carpet Trim Prime Line U 10347 Door Viewer SEAL SHOWER DR RUBBER 3/8X48IN
Covers, protects and provides a finished edge. Includes screw nails to secure trim to carpet. 160-degree viewer. Solid brass housing and glass U.L. listed lenses. 15/32" bore diameter. Fits 1-3/8" to 2" thick wood or metal doors. Includes 1 viewer.
PLATE HOLE COVER 2-5/8DIA BRS M-D 78022 Fluted Stair Edging VIEWER DOOR ANT BRASS
DOOR VIEWERS ANT BRS
Our Price: $6.32
Screws included. Fits 1-3/8" to 2" doors. Fluted edging protects and improves the appearance of stair edges. 1/8"H. Used to allow a user to identify visitors from the security of a locked door. Fits doors 1-3/8 inch to 2 inches thick. Offers 160 degrees lens angle for wide viewing. Requires 1/2 inch hole. Visual-pack.
VIEWER DOOR STN NKL           VIEWER DOOR ANT BRNZ          M-D 78071 Wide Fluted Carpet Trim
DOOR VIEWERS STN NCKL
Our Price: $6.32
DOOR VIEWERS ANT BRNZ
Our Price: $6.32
Used to allow a user to identify visitors from the security of a locked door. Fits doors 1-3/8 inch to 2 inches thick. Offers 160 degrees lens angle for wide viewing. Requires 1/2 inch hole. Visual-pack. Used to allow a user to identify visitors from the security of a locked door. Fits doors 1-3/8 inch to 2 inches thick. Offers 160 degrees lens angle for wide viewing. Requires 1/2 inch hole. Visual-pack. Covers, protects and provides a finished edge. Includes screw nails to secure trim to carpet.
Prime Line U 9983 Door Viewer Frost King H4128FB3 Fluted Stair Edging Prime Line U 9539 Armored Security Box Strike Plate
160-degree viewer. Solid brass housing and glass U.L. listed lenses. 15/32" bore diameter. Fits 1-3/8" to 2" thick wood or metal doors. Includes 1 viewer. Covers and protects the edge of carpeted, wood, or tiled stairs. Reduces wear and tear. Steel strike and face plate. Some mortising required. Screws at base of box strike secure it to 2" x 4" framing for added security. Includes 1 box strike, 1 face plate, and installation screws.
VIEWER DOOR WD ANG 160DEG BRS VIEWER DOOR WD ANG 200DEG NICK M-D 66092 Wide Smooth Carpet Bar
160 degree viewer. Adjusts for use on doors 1-3/8" to 1-3/4" thick. Bore hole diameter: 1/2" 200 degree viewer. Adjusts for use on doors 1-3/8? to 1-3/4? thick. Requires a 5/8? bore hole for installation. Covers and protects carpet edges to provide a finished appearance. Includes screw nails to secure trim.
SECURITY STRIKE 1-1/8X6 BRSNIC M-D 79053 Fluted Carpet Gripper VIEWER DOOR POLISH BRASS
DOOR VIEWERS PLSHD BRS
Our Price: $6.94
Screws included. Fluted carpet gripper with teeth. Secures stretch-in carpet and protects carpet edge. Includes screw nails to secure trim. 1/2"H. Used to allow a user to identify visitors from the security of a locked door.  UL listed glass lens. Offers 160 degrees lens angle for wide viewing. Mini-pack bagged.
M-D 79079 Wide Fluted Carpet Trim VIEWER DOOR ORB               VIEWER DOOR STN NKL
DOOR VIEWERS ORB
Our Price: $7.07
DOOR VIEWERS STN NCKL
Our Price: $7.07
Covers, protects and provides a finished edge. Includes screw nails to secure trim to carpet. Used to allow a user to identify visitors from the security of a locked door.  UL listed glass lens. Offers 160 degrees lens angle for wide viewing. Mini-pack bagged. Used to allow a user to identify visitors from the security of a locked door.  UL listed glass lens. Offers 160 degrees lens angle for wide viewing. Mini-pack bagged.
Stanley 158907 Door Viewer Prime Line M 6090 Bottom Mount Door Guide M-D 43854 Wide Fluted Carpet Trim
160 degrees lens angle for wide viewing. Used to allow a user to identify visitors from the security of a locked door. Fits doors 1-3/8? to 2? thick. Requires 1/2" hole.  V802 Pk Visual-Pac. Nylon bottom guide for sliding tub enclosure doors; fits 1/2" thick door rails; snap-in tabs hold guide to track. Fits On:  International. Contents: 2 guides. Covers, protects and provides a finished edge. Includes screw nails to secure trim to carpet.
M-D 43882 Fluted Carpet Gripper with Teeth VIEWER DOOR WD ANG 200DEG BRS Prime Line U-9907 Standard Chain Door Guard
Fluted carpet gripper with teeth. Secures stretch-in carpet and protects carpet edge. Includes screw nails to secure trim. 1/2"H. 200 degree viewer. Adjusts for use on doors 1-3/8? to 1-3/4? thick. Requires a 5/8? bore hole for installation. Solid brass keepers with steel chain secures door while allowing viewing and ventilation. (1) 5/8" x 2" keeper and (1) 3-5/16" x 1-3/8" keeper. Prefix U on factory number denotes new Defender Security packaging.
VIEWER DOOR WD ANG 160DEG NICK GUARD CHAIN DOOR BRONZE FINISH Prime-Line M 6144 Shower Door Bottom Guide
160 degree viewer. Adjusts for use on doors 1-3/8" to 1-3/4" thick. Bore hole diameter: 1/2" Solid brass keepers with steel chain secures door while allowing viewing and ventilation. (1) 5/8" x 2" keeper and (1) 3-5/16" x 1-3/8" keeper. Prefix U on factory number denotes new Defender Security packaging. Bottom guide used to keep glass door panels separated. Snaps into place on base of enclosure., Clear vinyl material.
Frost King H113FS/6 Fluted Carpet Bar M-D 79020 Fluted Stair Edging M-D 72074 Wide Smooth Carpet Bar
Joins carpet with other types of flooring at a lower height. Covers seams and spaces. Fluted edging protects and improves the appearance of stair edges. 1/8"H. Covers and protects carpet edges to provide a finished appearance. Includes screw nails to secure trim.
M-D 13029 Sill Nosing Prime Line U-10304 Standard Chain Door Guard Frost King H113FB/6 Fluted Carpet Bar
1-1/2"H sill nosing. Solid brass keepers with steel chain secures door while allowing viewing and ventilation. (1) 5/8" x 2" keeper and (1) 3-5/16" x 1-3/8" keeper. Prefix U on factory number denotes new Defender Security packaging. Joins carpet with other types of flooring at a lower height. Covers seams and spaces.
M-D 78212 Extra Wide Fluted Carpet Trim M-D 43878 Fluted Stair Edging M-D 79244 Extra Wide Fluted Carpet Trim
Extra wide carpet trim covers, protects and provides a finished edge. Includes screw nails to secure trim to carpet. Fluted edging protects and improves the appearance of stair edges. 1/8"H. Extra wide carpet trim covers, protects and provides a finished edge. Includes screw nails to secure trim to carpet.
M-D 74187 Wide Fluted Carpet Bar National Hardware V837 Sliding Dead Bolt/Chain Guard M-D 43858 Extra Wide Fluted Carpet Trim
Covers, protects and provides a finished edge. Includes screw nails to secure trim to carpet. National Hardware Dead Bolt/Chain Guard, Sliding, Series: V837, Fasteners: 1 X 6 Sheet Metal Screw, Solid Brass/Hardened Steel, Brass Extra wide carpet trim covers, protects and provides a finished edge. Includes screw nails to secure trim to carpet.
Prime Line M 6145 Shower Door Roller Assembly Prime Line U 9500 Latch Guard Prime Line U 9502 Latch Guard
Extruded aluminum bracket; 3/4" diameter oval edge, nylon ball bearing roller; used on frameless shower doors. Contents: 2 roller assemblies. Protects out-swinging door from forced entry. Includes 1 shield, 2 carriage bolts, 2 cap nuts, and washers. Protects out-swinging door from forced entry. Includes 1 shield, 2 carriage bolts, 2 cap nuts, and washers.
Frost King H591FS/6 Fluted Carpet Bar Stanley 336115 Door Viewer VIEWER DOOR ANT BRASS
DOOR VIEWERS ANT BRS
Our Price: $9.75
Joins carpet with other types of flooring at a lower height. Covers seams and spaces. 200-degree lens. V805 Pk, Visual-Pac. Used to allow a user to identify visitors from the security of a locked door.  Fits doors 1-3/8 inch to 2 inches thick. Offers 200 degrees lens angle for wide viewing. Requires 1/2 inch hole. Visual-pack.
National Hardware V1926 Chain Door Guard National Hardware V1926 Chain Door Guard Mintcraft HSH-012 Latch Guard
National Hardware Chain Door Guard, Series: V1926, Fasteners: NO 6 Screw, Solid Brass/Hardened Steel, Solid Brass National Hardware Chain Door Guard, Series: V1926, Suitable For Use With: All Exterior Doors, Fasteners: NO 6 Screw, Solid Brass/Hardened Steel, Antique Brass Overall size 3"W x 7"L. Bolts, nuts, and washers included.
Frost King H1591FS6 Fluted Carpet Bar Prime Line U 9566 Non-Recessed Door Edge Reinforcer VIEWER DOOR WD ANG 200DEG BRNZ
Joins carpet with other types of flooring at a lower height. Covers seams and spaces. Reinforces and repairs door edge. Assists in preventing forced entry. Use on wood or metal doors with mortise or drive-in latches. Accommodates lockset or deadbolt with any backset. Includes solid brass door channel, (2) #10 x 1" combo screws, (2) #10-32 hex nuts, (4) #8 x 5/8" Phillips truss head screws. Overall size 1"W x 4-1/2"L. 200 degree viewer. Adjusts for use on doors 1-3/8? to 1-3/4? thick. Requires a 5/8? bore hole for installation.
Frost King H591P/6 Carpet Bar M-D 85290 Carpet Trim M-D 78139 Fluted Carpet Gripper with Teeth
Joins carpet with other types of flooring at a lower height. Covers seams and spaces. Covers and protects carpet edges to provide a finished appearance. Includes screws to secure trim. 5/16"H. Fluted carpet gripper with teeth. Secures stretch-in carpet and protects carpet edge. Includes screw nails to secure trim. 1/2"H.
Frost King H591FB/6 Fluted Carpet Bar Stanley 330712 Door Viewer Stanley 162362 Door Viewer
Joins carpet with other types of flooring at a lower height. Covers seams and spaces. 200-degree lens. V805 Pk, Visual-Pac. 200-degree lens. V805 Pk, Visual-Pac.
M-D 78154 Wide Fluted Carpet Trim Prime Line U 9509 Latch Guard LATCH GUARD HD 3X7IN BRASS
Covers, protects and provides a finished edge. Includes screw nails to secure trim to carpet. Use on out-swinging doors with 2-3/8" standard residential backset. Protects against forced entry. Includes 1 shield, 2 carriage bolts, and 2 cap nuts and washers. Bolts, nuts, washers and screws included.
LATCH GUARD HD 3X7IN BRS NICKL Prime Line U 9512 Latch Guard Frost King H4128FS6 Stair Edging
Bolts, nuts, washers and screws included. Two-piece latch shield. For use on in-swinging doors. Interlocking brackets protect door from forced entry. Includes 1 door bracket, 1 jamb bracket, 1 set of flat head sheet metal screws, 1 set of one-way sheet metal screws, and 1 set of pan head screws for metal doors. Covers and protects the edge of carpeted, wood, or tiled stairs. Reduces wear and tear.
M-D 79087 Fluted Carpet Trim M-D 78089 Fluted Carpet Trim Prime Line U 9567 Non-Recessed Door Edge Reinforcer
Covers, protects and provides a finished edge. Includes screw nails to secure trim to carpet. Covers, protects and provides a finished edge. Includes screw nails to secure trim to carpet. Reinforces and repairs door edge. Assists in preventing forced entry. Use on wood or metal doors with mortise or drive-in latches. Accommodates lockset or deadbolt with any backset. Includes solid brass door channel, (2) #10 x 1" combo screws, (2) #10-32 hex nuts, (4) #8 x 5/8" Phillips truss head screws. Overall size 1"W x 4-1/2"L.
M-D 40124 Wide Carpet Trim M-D 40120 Wide Carpet Trim Prime Line U 9510 Latch Shield
Covers, protects and provides a finished edge. Includes screw nails to secure trim to carpet. Covers, protects and provides a finished edge. Includes screw nails to secure trim to carpet. Secures against forced entry. Used on outswing doors. Designed for use with locksets with 2-3/8" backsets. 4-7/8" hole center to center, 3/8" offset. Includes plated shield, (2) 5/16" x 2" carriage bolts, washers and cap nuts.
Prime Line U-9912 2-Key Door Guard M-D 79152 Wide Fluted Carpet Trim M-D 78105 Fluted Stair Edging
Plated steel chain and diecast keepers secures door while allowing viewing and ventilation. Can be unlocked with key from outside or inside. Bolt slides into keyed mechanism to lock. Includes 1 chain lock, 2 keys, and installation screws. Prefix U on factory number denotes new Defender Security packaging. Covers, protects and provides a finished edge. Includes screw nails to secure trim to carpet. Fluted edging protects and improves the appearance of stair edges. 1/8"H.
M-D 66084 Extra Wide Smooth Carpet Bar Prime Line U 9891 Door Viewer Prime Line U 10348 Door Viewer
Covers and protects carpet edges to provide a finished appearance. Includes screw nails to secure trim. 200-degree viewer. Solid brass housing and glass U.L. listed lenses. 9/16" bore. Fits 1-3/8" to 2-1/8" thick wood or metal doors. Includes 1 viewer. 200-degree viewer. Solid brass housing and glass U.L. listed lenses. 9/16" bore. Fits 1-3/8" to 2-1/8" thick wood or metal doors. Includes 1 viewer.
M-D 79137 Fluted Carpet Gripper Frost King H591HG/6 Carpet Bar Prime Line M 6191 Bottom Mount Door Hook Guide
Fluted carpet gripper with teeth. Secures stretch-in carpet and protects carpet edge. Includes screw nails to secure trim. 1/2"H. Joins carpet with other types of flooring at a lower height. Covers seams and spaces. Bottom guide for sliding shower enclosure doors.
National Hardware V1927 Gallery Sliding Dead Bolt/Chain Guard M-D 43856 Wide Fluted Carpet Trim M-D 66472 Wide Smooth Carpet Trim
National Hardware Dead Bolt/Chain Guard, Sliding, Series: V1927, Gallery, Solid Brass/Hardened Steel, Polished Brass Covers, protects and provides a finished edge. Includes screw nails to secure trim to carpet. Covers and protects carpet edges to provide a finished appearance. Includes screw nails to secure trim.
M-D 85357 Wide Carpet Trim M-D 43886 Fluted Carpet Gripper with Teeth Frost King H1591FB6 Fluted Carpet Bar
Oak trim covers and protects carpet edges to provide a finished appearance. Includes screws to secure trim. 7/16"H. Fluted carpet gripper with teeth. Secures stretch-in carpet and protects carpet edge. Includes screw nails to secure trim. 1/2"H. Joins carpet with other types of flooring at a lower height. Covers seams and spaces.
DOOR REINFORCER 4X4-1/2IN BRS M-D 13094 Sill Nosing STAIR EDGE FLUTE 36IN SAT SILV
For installing standard cylindrical door locks with 2-1/8" bore. 2-3/8" backset models overall size 4"W x 4-1/2"L. 2-3/4" backset models overall size 4"W x 4-1/2"L. U.L. Listed. Screws included. 1-1/2"H sill nosing.
STAIR EDGE FLUTE 36IN SAT NICK STAIR EDGE FLUTE 36IN SPICE   VIEWER DOOR ORB
DOOR VIEWERS ORB
Our Price: $12.33
Used to allow a user to identify visitors from the security of a locked door.  UL listed glass lens. Offers 180 degrees lens angle for wide viewing. Mini-pack bagged.
VIEWER DOOR POLISH BRASS      VIEWER DOOR STN NKL           DOOR REINFORCER 4X4-1/2IN BRS
DOOR VIEWERS PLSHD BRS
Our Price: $12.33
DOOR VIEWERS STN NCKL
Our Price: $12.33
Used to allow a user to identify visitors from the security of a locked door.  UL listed glass lens. Offers 180 degrees lens angle for wide viewing. Mini-pack bagged. Used to allow a user to identify visitors from the security of a locked door.  UL listed glass lens. Offers 180 degrees lens angle for wide viewing. Mini-pack bagged. For installing standard cylindrical door locks with 2-1/8" bore. 2-3/8" backset models overall size 4"W x 4-1/2"L. 2-3/4" backset models overall size 4"W x 4-1/2"L. U.L. Listed. Screws included.
Frost King H4128FB6 Fluted Stair Edging M-D 79103 Fluted Stair Edging M-D 85373 Wide Oak Molding
Covers and protects the edge of carpeted, wood, or tiled stairs. Reduces wear and tear. Fluted edging protects and improves the appearance of stair edges. 1/8"H. Oak trim covers and protects carpet edges to provide a finished appearance. Includes screws to secure trim. 7/16"H.
DOOR REINFORCER 4X4-1/2IN NICK DOOR REINFORCR 4-1/4X4-1/2 BRS Prime Line M6158 Shower Door Handleset
For installing standard cylindrical door locks with 2-1/8" bore. 2-3/8" backset models overall size 4"W x 4-1/2"L. 2-3/4" backset models overall size 4"W x 4-1/2"L. U.L. Listed. Screws included. For installing standard cylindrical door locks with 2-1/8" bore. 2-3/8" backset models overall size 4"W x 4-1/2"L. 2-3/4" backset models overall size 4"W x 4-1/2"L. U.L. Listed. Screws included. Plated diecast handles; outside handle with threaded studs and inside handle with holes; supplied with stainless steel machine screws. Contents: 1 handle set with installation screws.
M-D 78220 Extra Wide Fluted Carpet Trim M-D 72256 Smooth Carpet Bar M-D 43880 Fluted Stair Edging
Extra wide carpet trim covers, protects and provides a finished edge. Includes screw nails to secure trim to carpet. Covers and protects carpet edges to provide a finished appearance. Includes screw nails to secure trim. Fluted edging protects and improves the appearance of stair edges. 1/8"H.
DOOR REINFORCER 4X4-1/2IN NICK DOOR REINFORCR 4-1/4X4-1/2 NIC Prime Line U 9556 Non-Recessed Lock and Door Edge Reinforcer
For installing standard cylindrical door locks with 2-1/8" bore. 2-3/8" backset models overall size 4"W x 4-1/2"L. 2-3/4" backset models overall size 4"W x 4-1/2"L. U.L. Listed. Screws included. For installing standard cylindrical door locks with 2-1/8" bore. 2-3/8" backset models overall size 4"W x 4-1/2"L. 2-3/4" backset models overall size 4"W x 4-1/2"L. U.L. Listed. Screws included. Reinforces and repairs doors. Assists in preventing forced entry. Use on wood or metal doors with mortise or drive-in latches. 2-1/8" bore. Accommodates key-in knob locksets or deadbolts. Includes (2) #10 x 1" combo screws, (2) #10-32 hex nuts, (4) #8 x 5/8" Phillips truss head screws. Prefix U on factory number denotes new Defender Security packaging.
Prime Line U 9555 Non-Recessed Lock and Door Edge Reinforcer Prime Line U 9558 Non-Recessed Lock and Door Edge Reinforcer Prime-Line U 9590 Lock and Door Reinforcer
Reinforces and repairs doors. Assists in preventing forced entry. Use on wood or metal doors with mortise or drive-in latches. 2-1/8" bore. Accommodates key-in knob locksets or deadbolts. Includes (2) #10 x 1" combo screws, (2) #10-32 hex nuts, (4) #8 x 5/8" Phillips truss head screws. Prefix U on factory number denotes new Defender Security packaging. Reinforces and repairs doors. Assists in preventing forced entry. Use on wood or metal doors with mortise or drive-in latches. 2-1/8" bore. Accommodates key-in knob locksets or deadbolts. Includes (2) #10 x 1" combo screws, (2) #10-32 hex nuts, (4) #8 x 5/8" Phillips truss head screws. Prefix U on factory number denotes new Defender Security packaging. Reinforces and repairs doors. Assists in preventing forced entry. Use on wood or metal doors with mortise or drive-in latches. 2-1/8" bore. Accommodates key-in-knob locksets or deadbolts. Includes (2) #10 x 1" combo screws, (2) #10-32 hex nuts, (4) #8 x 5/8" Phillips truss head screws. 9" overall height. SKUs 728.9341, 868.2130, 626.3875, 7236664 and 7236672 have 3-7/8" overall width and SKUs 353.5655 and 384.9577 have 4-5/16" overall width.
Prime-Line U 9589 Adjustable Lock and Door Reinforcer M-D 43860 Extra Wide Fluted Carpet Trim M-D 78188 Fluted Carpet Bar
Reinforces and repairs doors. Assists in preventing forced entry. Use on wood or metal doors with mortise or drive-in latches. 2-1/8" bore. Accommodates key-in-knob locksets or deadbolts. Includes (2) #10 x 1" combo screws, (2) #10-32 hex nuts, (4) #8 x 5/8" Phillips truss head screws. 9" overall height. SKUs 728.9341, 868.2130, 626.3875, 7236664 and 7236672 have 3-7/8" overall width and SKUs 353.5655 and 384.9577 have 4-5/16" overall width. Extra wide carpet trim covers, protects and provides a finished edge. Includes screw nails to secure trim to carpet. Covers, protects and provides a finished edge. Includes screw nails to secure trim to carpet.
M-D 74336 Wide Fluted Carpet Bar M-D 31215 T-Style Vinyl Divider with Metal Track M-D 79251 Extra Wide Fluted Carpet Trim
Covers, protects and provides a finished edge. Includes screw nails to secure trim to carpet. Divider for stairs and floor transitions, with metal track. Extra wide carpet trim covers, protects and provides a finished edge. Includes screw nails to secure trim to carpet.
M-D 85415 Extra Wide Carpet Trim Prime-Line U 10744 Door Guard Prime-Line U 10745 Door Guard
Oak trim covers and protects carpet edges to provide a finished appearance. Includes screws to secure trim. 5/8"H. Reinforces and repairs doors. Assists in preventing forced entry. Use on wood or metal doors with mortise or drive-in latches. 2-1/8" bore. Accommodates key-in knob locksets or deadbolts. Includes (2) #10 x 1" combo screws, (2) #10-32 hex nuts, (4) #8 x 5/8" Phillips truss head screws. Prefix U on factory number denotes new Defender Security packaging. Reinforces and repairs doors. Assists in preventing forced entry. Use on wood or metal doors with mortise or drive-in latches. 2-1/8" bore. Accommodates key-in knob locksets or deadbolts. Includes (2) #10 x 1" combo screws, (2) #10-32 hex nuts, (4) #8 x 5/8" Phillips truss head screws. Prefix U on factory number denotes new Defender Security packaging.
Prime Line U 10027 Latch Guard M-D 79194 Fluted Carpet Bar M-D 78345 Fluted Stair Edging
Heavy steel latch guard for out-swinging doors. Four door bolts and raised center dome for strike lip clearance. Includes (4) 5/16" x 2" carriage bolts, washers, and cap nuts. Covers, protects and provides a finished edge. Includes screw nails to secure trim to carpet. Fluted edging protects and improves the appearance of stair edges. 1/8"H.
LATCH GUARD HD 3-1/2X11-3/4BRS DOOR REINFORCER 4X9IN BRASS   M-D 85308 Smooth Carpet Trim
Bolts, nuts, washers and screws included. For installing standard cylindrical door locks with 2-1/8" bore. 2-3/8" backset models overall size 4"W x 9"L. U.L. Listed. Screws included. Covers and protects carpet edges to provide a finished appearance. Includes screws to secure trim. 5/16"H.
Prime-Line M 6111 Sliding Shower Door Bottom Guide Prime Line U 9896 Door Viewer M-D 79558 Fluted Stair Edging
Clear acrylic bottom guide for sliding tub enclosure doors. Fits on 1/2" thick panels. Used by Sterling and others. 130-degree viewer. 1" bore. Solid brass end caps with diecast threaded housing and glass lens. Fits 1-3/4" to 2-3/8" thick wood or metal doors. Includes 1 viewer. Fluted edging protects and improves the appearance of stair edges. 1/8"H.
M-D 40122 Wide Carpet Trim M-D 40126 Wide Carpet Trim Schlage SC698P-B619 Wide Angle Door Viewer
Covers, protects and provides a finished edge. Includes screw nails to secure trim to carpet. Covers, protects and provides a finished edge. Includes screw nails to secure trim to carpet. 190-degree viewer. Lense projects 1/4" from face of door. 4 optical glass lenses, for doors 1-3/8" to 2-1/8" thick. Installation requires 9/16" hole, height 60" from floor.
M-D 66449 Extra Wide Smooth Carpet Bar Mintcraft HSH-048 Door Reinforcer M-D 72249 Extra Wide Smooth Carpet Trim
Covers and protects carpet edges to provide a finished appearance. Includes screw nails to secure trim. For installing standard cylindrical door locks with 2-1/8" bore. 2-3/8" backset models overall size 4"W x 9"L. U.L. Listed. Screws included. Covers and protects carpet edges to provide a finished appearance. Includes screw nails to secure trim.
DOOR REINFORCER 4X9IN BRS NICK M-D 85365 Wide Carpet Trim Prime-Line M 6230 Half Round Shower Door Bottom Seal
For installing standard cylindrical door locks with 2-1/8" bore. 2-3/8" backset models overall size 4"W x 9"L. U.L. Listed. Screws included. Oak trim covers and protects carpet edges to provide a finished appearance. Includes screws to secure trim. 7/16"H. Prime-Line Shower Door Bottom Seal, Half Round, 36 in Length, 13/16 in Height, Vinyl, Gray
DOOR REINFORCER 4X9IN BRS NICK Prime Line U 9548 Non-Recessed Lock and Door Edge Reinforcer Prime Line U 9550 Non-Recessed Lock and Door Edge Reinforcer
For installing standard cylindrical door locks with 2-1/8" bore. 2-3/8" backset models overall size 4"W x 9"L. U.L. Listed. Screws included. Reinforces and repairs doors. Assists in preventing forced entry. Use on wood or metal doors with mortise or drive-in latches. 2-1/8" bore. Accommodates key-in-knob locksets or deadbolts. Includes (2) #10 x 1" combo screws, (2) #10-32 hex nuts, (4) #8 x 5/8" Phillips truss head screws. 9" overall height. SKUs 728.9341, 868.2130, 626.3875, 7236664 and 7236672 have 3-7/8" overall width and SKUs 353.5655 and 384.9577 have 4-5/16" overall width. Reinforces and repairs doors. Assists in preventing forced entry. Use on wood or metal doors with mortise or drive-in latches. 2-1/8" bore. Accommodates key-in-knob locksets or deadbolts. Includes (2) #10 x 1" combo screws, (2) #10-32 hex nuts, (4) #8 x 5/8" Phillips truss head screws. 9" overall height. SKUs 728.9341, 868.2130, 626.3875, 7236664 and 7236672 have 3-7/8" overall width and SKUs 353.5655 and 384.9577 have 4-5/16" overall width.
Prime Line U 9547 Non-Recessed Lock and Door Edge Reinforcer Prime Line U 9560 Non-Recessed Lock and Door Edge Reinforcer DOOR REINFORCER 4X9IN BRASS
Reinforces and repairs doors. Assists in preventing forced entry. Use on wood or metal doors with mortise or drive-in latches. 2-1/8" bore. Accommodates key-in-knob locksets or deadbolts. Includes (2) #10 x 1" combo screws, (2) #10-32 hex nuts, (4) #8 x 5/8" Phillips truss head screws. 9" overall height. SKUs 728.9341, 868.2130, 626.3875, 7236664 and 7236672 have 3-7/8" overall width and SKUs 353.5655 and 384.9577 have 4-5/16" overall width. Reinforces and repairs door edge and assists in preventing forced entry. Used on wood or metal doors with mortise or drive-in latches. Accommodates key-in-knob locksets and deadbolts or combination locksets. Door thickness 1-3/4", bore 2-1/8", backset 2-3/8". Reinforcer: 3-7/8"W. Includes solid brass door channel, (4) #10 x 1" combo screws, (4) #10-32 hex nuts, (4) #8 x 5/8" Phillips truss head screws. For installing standard cylindrical door locks with 2-1/8" bore. 2-3/8" backset models overall size 4"W x 9"L. U.L. Listed. Screws included.
Prime-Line U 10539 Double Bore Lock and Door Reinforcer Prime Line U 9549 Non-Recessed Lock and Door Edge Reinforcer M-D 85423 Extra Wide Carpet Trim
Reinforces and repairs door edge and assists in preventing forced entry. Used on wood or metal doors with mortise or drive-in latches. Accommodates key-in-knob locksets and deadbolts or combination locksets. Door thickness 1-3/4", bore 2-1/8", backset 2-3/8". Reinforcer: Non-recessed edge type, 3-7/8"W. Reinforces and repairs doors. Assists in preventing forced entry. Use on wood or metal doors with mortise or drive-in latches. 2-1/8" bore. Accommodates key-in-knob locksets or deadbolts. Includes (2) #10 x 1" combo screws, (2) #10-32 hex nuts, (4) #8 x 5/8" Phillips truss head screws. 9" overall height. SKUs 728.9341, 868.2130, 626.3875, 7236664 and 7236672 have 3-7/8" overall width and SKUs 353.5655 and 384.9577 have 4-5/16" overall width. Oak trim covers and protects carpet edges to provide a finished appearance. Includes screws to secure trim. 5/8"H.
M-D 85381 Wide Oak Molding M-D 85449 Extra Wide Oak Molding Prime Line U 9537 Combination Non-Recessed Door Guard
Oak trim covers and protects carpet edges to provide a finished appearance. Includes screws to secure trim. 7/16"H. Oak trim covers and protects carpet edges to provide a finished appearance. Includes screws to secure trim. 5/8"H. Reinforces and repairs door edge and assists in preventing forced entry. Used on wood or metal doors with mortise or drive-in latches. Accommodates key-in-knob locksets and deadbolts or combination locksets. Door thickness 1-3/4", bore 2-1/8", backset 2-3/8". Reinforcer: 3-7/8"W. Includes solid brass door channel, (4) #10 x 1" combo screws, (4) #10-32 hex nuts, (4) #8 x 5/8" Phillips truss head screws.
Prime-Line U 10313 Door Viewer M-D 78055 Fluted Carpet Gripper with Teeth M-D 66035 Smooth Stair Edging
180-degree viewer. Contains plastic and UL listed glass lenses. Fits 1-3/8" to 2-1/8" thick wood or metal doors. 9/16" diameter. Fluted carpet gripper with teeth. Secures stretch-in carpet and protects carpet edge. Includes screw nails to secure trim. 1/2"H. Smooth edging protects and improves the appearance of stair edges. Includes screw nails to secure edging. 1-1/8"H.
M-D 75093 Carpet Tack Strip M-D 66266 Smooth Stair Edging
Dual purpose for wood and concrete sub-floors. Perfect for small repairs and DIY projects. Packaged in poly bags. Each tack strip is 4 feet long. 3-pack is 12 feet of tack strip. Smooth edging protects and improves the appearance of stair edges. Includes screw nails to secure edging. 1-1/8"H.
   
 
1