Home > HARDWARE > WINDOW & DOOR HARDWARE > THRESHOLDS / FLOOR TRIM
Choose a sub category:
SADDLE -ALUMINUM SADDLE - WOOD VINYL TOP - ALUMINUM
VINLY TOP - WOOD BUMPER THRESHOLDS DOME THRESHOLDS
DOOR SHOES / RAIN DRIP THRESHOLD REPLACEMENT VINYL DOOR BOTTOMS
DOOR SWEEPS DOOR SILLS SILL NOSING
SEAM BINDER FLOOR EDGING CARPET BAR
STAIR EDGING CARPET TACK STRIP COVE BASE
Sort By:
1
Prime Line GD 12150 Extruded Cable Ferrule and Stop Prime Line GD 12149 Extruded Cable Ferrule and Stop Prime Line GD 12152 Extruded Cable Ferrule and Stop
Designed for use with overhead garage door hardware. Ferrules used to clamp cable loops into fixed position while stops finish off cable ends or act as stopping points at any location on cable. Card contains 2 ferrules and 2 stops. Designed for use with overhead garage door hardware. Ferrules used to clamp cable loops into fixed position while stops finish off cable ends or act as stopping points at any location on cable. Card contains 2 ferrules and 2 stops. Designed for use with overhead garage door hardware. Ferrules used to clamp cable loops into fixed position while stops finish off cable ends or act as stopping points at any location on cable. Card contains 2 ferrules and 2 stops.
Prime Line GD 12151 Extruded Cable Ferrule and Stop M-D 65110 Z-Bar Carpet/Floor Edging Frost King DS101BH Self-Stick Door Sweep
Designed for use with overhead garage door hardware. Ferrules used to clamp cable loops into fixed position while stops finish off cable ends or act as stopping points at any location on cable. Card contains 2 ferrules and 2 stops. Use to create a finished edge where stretch-in carpeting meets adjacent floors. Install with tackstrip. Attach to tackstrip, roll carpet over edge of Z bar, and tap down. Self-adheres to all types of doors. 1-1/2"H.
M-D 04226 T-Section Door Bottom M-D 04242 Y-Section Door Bottom Prime Line GD 12153 Extruded Cable Ferrule and Stop
A vinyl replacement for aluminum storm doors. A vinyl replacement for aluminum storm doors. Designed for use with overhead garage door hardware. Ferrules used to clamp cable loops into fixed position while stops finish off cable ends or act as stopping points at any location on cable. Card contains 2 ferrules and 2 stops.
M-D 21501 Carpet Screw Nail M-D 21485 Carpet Screw Nail Frost King DS101WH Self-Stick Door Sweep
Carpet screw nails for use with M-D floor trims. Hammer screw nails into wood or concrete floors. Wooden pegs needed for concrete sub-floors. Carpet screw nails for use with M-D floor trims. Hammer screw nails into wood or concrete floors. Wooden pegs needed for concrete sub-floors. Self-adheres to all types of doors. 1-1/2"H.
Frost King H113FS/3 Fluted Carpet Bar Prime Line GD 12154 Extruded Cable Ferrule and Stop Frost King H333FS/3 Seam Binder
Joins carpet with other types of flooring at a lower height. Covers seams and spaces. Designed for use with overhead garage door hardware. Ferrules used to clamp cable loops into fixed position while stops finish off cable ends or act as stopping points at any location on cable. Card contains 2 ferrules and 2 stops. Joins floor covering of same height. Covers seams and spaces.
Frost King A54/36H Door Sweep M-D 13466 Replacement Threshold Insert with Vinyl Seal M-D 13565 Replacement Threshold Insert with Vinyl Seal
Seals out drafts and dust. 1-1/4"H. Vinyl replacement insert designed specifically to replace damaged or lost original vinyl insert. Fits models standard and economy thresholds. Highest quality vinyl replacement insert designed specifically to replace damaged or lost original vinyl inserts. Fits hardwood models.
M-D 25756 Replacement Threshold Insert M-D 06304 Replacement Threshold Insert BOLT/NUT FLT-HD CARRIAGE 12PK
Vinyl replacement inserts increase the longevity and value of the door sweeps. Use for L and U shaped model door bottom. Vinyl replacement inserts increase the longevity and value of the door sweeps. Use for L and U shaped model door bottom. National Hardware Carriage Bolt and Nut, Series: V7652, 1/4-20 in Thread, Flat Head, 1-3/4 in Thread Length, Steel, Zinc Plated, Used With Wood or Steel Garage Doors
BOLT/NT RBD NK ZN 1/4IN-20X1/2 Frost King H113FB/3 Fluted Carpet Bar M-D 13417 Replacement Threshold Insert
National Hardware Bolt and Nut, Series: V7653, 1/4-20 in Thread, 1/2 in Thread Length, Ribbed Neck, Steel, Zinc Plated, Used With Fiberglass Garage Doors Joins carpet with other types of flooring at a lower height. Covers seams and spaces. Vinyl replacement insert designed specifically to replace damaged or lost original vinyl insert.
M-D 13524 Replacement Adjustable Threshold Insert with Vinyl Seal M-D 05629 Economy Door Sweep Frost King H591FS/3 Fluted Carpet Bar
Adjustable. Highest quality vinyl replacement insert designed specifically to replace damaged or lost original vinyl insert. Seals bottom of door keeping out dirt and drafts. Slotted holes for adjustment. 1-3/8"H. Joins carpet with other types of flooring at a lower height. Covers seams and spaces.
M-D 78030 Fluted Floor Tile Edge Frost King H591FB/3 Fluted Carpet Bar M-D 5603 Door Sweep
Tile edging covers seams and joints in vinyl tile floor coverings. Includes screw nails to secure edging. Joins carpet with other types of flooring at a lower height. Covers seams and spaces. Rigid vinyl with soft vinyl sweep. Sticks to all doors. Flexible to compensate for carpet or uneven doors. 1-1/2"H.
M-D 5587 Door Sweep National Hardware V6 Extra Heavy Door Pull Frost King H1591FS3 Fluted Carpet Bar
Rigid vinyl with soft vinyl sweep. Sticks to all doors. Flexible to compensate for carpet or uneven doors. 1-1/2"H. National Hardware Door Pull, Extra Heavy, Series: V6, Suitable For Use With: Metal and Wood Doors, 6-3/4 in Length, 1.38 in Width, 1.82 in Depth, Steel, Zinc Plated Joins carpet with other types of flooring at a lower height. Covers seams and spaces.
Frost King H4128FS3 Stair Edging Stanley 235309 Open Bar Holder M-D 78006 Fluted Carpet Trim
Covers and protects the edge of carpeted, wood, or tiled stairs. Reduces wear and tear. Used to reinforce doorways against forced entry by providing secure placement of 2x4 lumber against entry side of door. 2x4 must be slid through the  bar holders. Clearance for 1/4" bolts. Manufactured from hot rolled steel. Covers, protects and provides a finished edge. Includes screw nails to secure trim to carpet.
M-D 43824 Replacement Threshold Insert with Vinyl Seal M-D 13219 Replacement Threshold Insert with Metal Retainer Strip National Hardware V7638 Lift Handle
Replacement seal for M-D Building Deluxe aluminum thresholds. Designed to replace damaged or lost original vinyl inserts. Fits deluxe thresholds. National Hardware Lift Handle, Series: V7638, 7-1/4 in Length, Steel, Galvanized, BHMA A138.18
ROLLER LG STM HD PLN STL 1-7/8 BRACKET RLR BTM/TP GLV 2-1/2IN ROLLER STND PLN STL 1-7/8IN
National Hardware Door Roller, Series: V7602, Heavy Duty, Long Stem, 1-7/8 in Roller Diameter, 0.44 in Roller Width, 10 Ball Bearing, 7-9/16 in Overall Length, Plain Steel, 7/16 in Shaft National Roller Bracket, Adjustable, Top Mount, 7/16 in Roller Shaft, Steel, Hot Dip Galvanized, Includes: Bolt and Nut, Class CD1832, Used On Overhead Sectional Wood and Steel Garage Doors National Hardware Door Roller, Series: V7601, Standard, 1-7/8 in Roller Diameter, 0.44 in Roller Width, 4.38 in Overall Length, Plain Steel, 7/16 in Shaft
HINGE HI-GALV 7-3/8IN         M-D 78048 Fluted Seam Binder M-D 79038 Fluted Tile Edge
National Hardware Door Hinge, High, 7-3/8 in Overall Length, 14 ga Steel, Galvanized, BHMA A138.1, NO 1, For Metal and Wood Garage Doors A760 seam binder cover seams and joints in linoleum, tile, carpet, vinyl and other floor coverings. Includes screw nails to secure edging to the floor. Tile edging covers seams and joints in vinyl tile floor coverings. Includes screw nails to secure edging.
Frost King H1591FB3 Fluted Carpet Bar Stanley 351503 Open Bar Holder PULLEY GARAGE DOOR GALV 3IN
Joins carpet with other types of flooring at a lower height. Covers seams and spaces. Used to reinforce doorways against forced entry by providing secure placement of 2x4 lumber against entry side of door. 2x4 must be slid through the  bar holders. Clearance for 1/4" bolts. Manufactured from hot rolled steel. National Hardware Door Pulley, Series: N280, 0.56 in Bore, 3 in Outer Diameter, 3 in Sheave Width, 1 Grooves, 0.39 in Groove, Hook Mounting, Steel, Galvanized, Includes: Clevis Hook, Nut and Bolt, Standards: BHMA A138.18, Used On One Car Stretch Spring Door
ROLLER STND PLN STL 1-3/4IN   HINGE HI-GALV 7-3/8IN         Prime Line GD 52109 Garage Door Pulley
National Hardware Door Roller, Series: V7603, Standard, 1-3/4 in Roller Diameter, 0.31 in Roller Width, 4 in Overall Length, Plain Steel, 7/16 in Shaft National Hardware Door Hinge, High, 7-3/8 in Overall Length, 14 ga Steel, Galvanized, BHMA A138.1, NO 2, For Metal and Wood Garage Doors Heavy-duty galvanized steel pulley used at stationary or spring positions. Galvanized steel strap and case hardened steel race with steel ball bearings. Factory lubricated. Includes pulley, strap, and axle bolt with nut.
Stanley 235291 Closed Bar Holder M-D 79004 Fluted Carpet Trim Prime Line GD52111 Convex Edge Door Roller
Used to reinforce doorways against forced entry by providing secure placement of 2x4 lumber against entry side of door. 2x4 must be slid through the  bar holders. Clearance for 1/4" bolts. Manufactured from hot rolled steel. Covers, protects and provides a finished edge. Includes screw nails to secure trim to carpet. Used on side by side hinge placements for added strength. Factory lubricated, steel inner race with 10 ball bearings. Roller 1-7/8" O.D.
HINGE HI-GALV 7-3/8IN         M-D 78022 Fluted Stair Edging Prime Line GD52117 Adjustable Top Mount Roller Fixture
National Hardware Door Hinge, High, 7-3/8 in Overall Length, 14 ga Steel, Galvanized, BHMA A138.1, NO 3, For Metal and Wood Garage Doors Fluted edging protects and improves the appearance of stair edges. 1/8"H. Used on both wood and metal doors. Heavy-duty galvanized steel construction. Adjustable roller plate. Accepts a standard 7/16"OD stem roller. Includes four 1/4"-20 x 1-7/8" pancake head carriage bolts with nuts.
Prime Line GD 52104 Standard Garage Door Hinge 3 in W Door Leaf ROLLER GARAGE DRSTL 3-1/2X7/16 M-D 78071 Wide Fluted Carpet Trim
Used by most garage door manufacturers. Roller tube accepts a standard 7/16"OD stem roller. Made of 14 gauge galvanized steel, 3"W overall. Includes four 1/4"-20 x 1-7/8" pancake head carriage bolts with nuts. High-impact plastic for good performance and quiet, trouble-free operation in all weather environments. Roller 1-7/8" O.D. Covers, protects and provides a finished edge. Includes screw nails to secure trim to carpet.
Frost King A59/36H Door Sweep M-D 79046 Fluted Seam Binder National Hardware V6 Extra Heavy Door Pull
DOOR PULLS 6-3/4IN BLK
Our Price: $6.42
Screw-on door sweep seals drafts at bottom of door. A760 seam binder cover seams and joints in linoleum, tile, carpet, vinyl and other floor coverings. Includes screw nails to secure edging to the floor. National Hardware Door Pull, Extra Heavy, Series: V6, Suitable For Use With: Metal and Wood Doors, 6-3/4 in Length, 1.38 in Width, 1.82 in Depth, Steel, Black
Prime Line GD 52130 Door Lift Handle Prime Line GD52110 Convex Edge Standard Door Roller Frost King W59/36H Door Sweep
Replaces most handles currently in use. Galvanized steel construction. Use vertically or horizontally. Includes two 1/4"-20 x 1-7/8" pancake head carriage bolts with nuts. Factory lubricated, steel inner race. Fits 2" standard J-track. Roller 1-7/8" O.D. Screw-on door sweep seals drafts at bottom of door.
Frost King H4128FB3 Fluted Stair Edging M-D 66019 Smooth Seam Binder Prime Line GD 52105 Standard Garage Door Hinge 3 in W Door Leaf
Covers and protects the edge of carpeted, wood, or tiled stairs. Reduces wear and tear. A708 seam binder cover seams and joints in linoleum, tile, carpet, vinyl and other floor coverings. Includes screw nails to secure edging to the floor. Used by most garage door manufacturers. Roller tube accepts a standard 7/16"OD stem roller. Made of 14 gauge galvanized steel, 3"W overall. Includes four 1/4"-20 x 1-7/8" pancake head carriage bolts with nuts.
M-D 78014 Wide Fluted Seam Binder Stanley 351502 Closed Bar Holder HINGE HI-GALV 7-3/8IN
A708 seam binder covers seams and joints in linoleum, tile, carpet, vinyl and other floor coverings. Includes screw nails to secure edging to the floor. Used to reinforce doorways against forced entry by providing secure placement of 2x4 lumber against entry side of door. 2x4 must be slid through the  bar holders. Clearance for 1/4" bolts. Manufactured from hot rolled steel. National Hardware Door Hinge, High, 7-3/8 in Overall Length, 14 ga Steel, Galvanized, BHMA A138.1, NO 4, For Metal and Wood Garage Doors
M-D 05082 Triple Fin Door Sweep Prime Line GD 52106 Standard Garage Door Hinge 3 in W Door Leaf M-D 66092 Wide Smooth Carpet Bar
Triple fin vinyl seal provides superior weathertight seal for uneven floor surfaces. Slotted holes for adjustment. 1-1/4"H. Used by most garage door manufacturers. Roller tube accepts a standard 7/16"OD stem roller. Made of 14 gauge galvanized steel, 3"W overall. Includes four 1/4"-20 x 1-7/8" pancake head carriage bolts with nuts. Covers and protects carpet edges to provide a finished appearance. Includes screw nails to secure trim.
M-D 79053 Fluted Carpet Gripper M-D 79079 Wide Fluted Carpet Trim M-D 05090 Triple Fin Door Sweep
Fluted carpet gripper with teeth. Secures stretch-in carpet and protects carpet edge. Includes screw nails to secure trim. 1/2"H. Covers, protects and provides a finished edge. Includes screw nails to secure trim to carpet. Triple fin vinyl seal provides superior weathertight seal for uneven floor surfaces. Slotted holes for adjustment. 1-1/4"H.
LOCK FOR SHFT ZN PLT 5/16IN SQ Frost King H333FS/6 Seam Binder M-D 43854 Wide Fluted Carpet Trim
National Hardware Swivel Lock, Series: V7645, Suitable For Use With: 5/16 x 5/16 in Shaft, Steel, Zinc Plated, For Garage Door Joins floor covering of same height. Covers seams and spaces. Covers, protects and provides a finished edge. Includes screw nails to secure trim to carpet.
M-D 43882 Fluted Carpet Gripper with Teeth Frost King C35PH Door Sweep with Nylon Brush M-D 67967 Kerf Replacement Door Bottom
Fluted carpet gripper with teeth. Secures stretch-in carpet and protects carpet edge. Includes screw nails to secure trim. 1/2"H. Durable plastic with black nylon brush. 1-3/4" dual vinyl fits a variety of doors with notched kerfs.
ROLLER HD PLN STL 1-7/8IN     Frost King T35/36H Under-Door Threshold Kit Frost King WAT250 Saddle Threshold
National Hardware Door Roller, Series: V7602, Heavy Duty, Suitable For Use With: Residential Garage Doors, 1-7/8 in Roller Diameter, 10 Ball Bearing, 4-3/8 in Overall Length, Plain Steel, 7/16 in Shaft Heavy duty premium low rug, residential use. For use with saddle thresholds. Wood interior threshold. Covers seams in interior door ways.
BULLNOSE 5/16INX8FT PVC WHITE BULLNOSE 5/16INX8FT PVC BEIGE Frost King WAT175 Saddle Threshold
Wood interior threshold. Covers seams in interior door ways.
M-D Ultra 69612 Door Sweep with Vinyl Seal Frost King B59/36H Door Sweep M-D 73792 Round Edge Trim Wall
2-1/4"H door sweep with vinyl insert. Screw-on door sweep seals drafts at bottom of door. Added decor and protection to wall and floor tile.
M-D 73820 Round Tile Edge Frost King H113FS/6 Fluted Carpet Bar M-D 79020 Fluted Stair Edging
Added decor and protection to wall and floor tile. Joins carpet with other types of flooring at a lower height. Covers seams and spaces. Fluted edging protects and improves the appearance of stair edges. 1/8"H.
M-D 79012 Wide Fluted Seam Binder M-D 72074 Wide Smooth Carpet Bar Stanley 100834 Door Bumper
A708 seam binder covers seams and joints in linoleum, tile, carpet, vinyl and other floor coverings. Includes screw nails to secure edging to the floor. Covers and protects carpet edges to provide a finished appearance. Includes screw nails to secure trim. Designed for use as a door stop on up to 2" thick sliding doors. Embossed steel for added strength. Display packed.
M-D 13029 Sill Nosing Frost King H113FB/6 Fluted Carpet Bar PULL DOOR GALV 6-3/4IN
DOOR PULLS 6-3/4IN GALV
Our Price: $8.14
1-1/2"H sill nosing. Joins carpet with other types of flooring at a lower height. Covers seams and spaces. National Hardware Door Pull, Series: V6, Extra Heavy, Suitable For Use With: Metal or Wood Doors, 0.29 in Diameter, 6-3/4 in Length, 1.38 in Width, 1.82 in Depth, 0.1 in Plate, Steel, Galvanized, Standards: BHMA A138.18
FOB SHELL CHRYS S-CHRY800     FOB SHELL CHRYS S-CHRY801     FOB SHELL FORD S-FORD800
FOB shell for Chrysler vehicles. 3 button. Batteries not included. FOB shell for Chrysler vehicles. 4-button. Batteries not included. FOB shell for Ford vehicles. 4 button. Batteries not included.
FOB SHELL FORD S-FORD801      FOB SHELL GM S-GM800          FOB SHELL GM S-GM801
FOB SHELL GM S-GM800
Our Price: $8.15
FOB SHELL GM S-GM801
Our Price: $8.15
FOB shell for Ford vehicles. 3 button. Batteries not included. FOB shell for GM vehicles. 3 button. Batteries not included. FOB shell for GM vehicles. 4 button. Batteries not included.
FOB SHELL GM S-GM802          FOB SHELL GM S-GM803          FOB SHELL GM S-GM804
FOB SHELL GM S-GM802
Our Price: $8.15
FOB SHELL GM S-GM803
Our Price: $8.15
FOB SHELL GM S-GM804
Our Price: $8.15
FOB shell for GM vehicles. 4 button. Batteries not included. FOB shell for GM vehicles. 4 button. Batteries not included. FOB shell for GM vehicles. 3 button. Batteries not included.
FOB SHELL GM S-GM805          FOB SHELL GM S-GM806          FOB SHELL GM S-GM807
FOB SHELL GM S-GM805
Our Price: $8.15
FOB SHELL GM S-GM806
Our Price: $8.15
FOB SHELL GM S-GM807
Our Price: $8.15
FOB shell for GM vehicles. 5 button. Batteries not included. FOB shell for GM vehicles. 4 button. Batteries not included. FOB shell for GM vehicles. 5 button. Batteries not included.
FOB SHELL GM S-GM808          FOB SHELL GM S-GM909          FOB SHELL GM S-GM810
FOB SHELL GM S-GM808
Our Price: $8.15
FOB SHELL GM S-GM909
Our Price: $8.15
FOB SHELL GM S-GM810
Our Price: $8.15
FOB shell for GM vehicles. 5 button. Batteries not included. FOB shell for GM vehicles. 5 button. Batteries not included. FOB shell for GM vehicles. 6 button. Batteries not included.
FOB SHELL GM S-GM811 5B       FOB SHELL GM S-GM812 4B       FOB SHELL GM S-GM813 3B
FOB SHELL GM S-GM811 5B
Our Price: $8.15
FOB SHELL GM S-GM812 4B
Our Price: $8.15
FOB SHELL GM S-GM813 3B
Our Price: $8.15
FOB shell for GM vehicles. 5 button. Batteries not included. FOB shell for GM vehicles. 4 button. Batteries not included. FOB shell for GM vehicles. 3 button. Batteries not included.
FOB SHELL GM S-GM814 3B       FOB SHELL GM S-GM815 5B       FOB SHELL GM S-GM816 3B
FOB SHELL GM S-GM814 3B
Our Price: $8.15
FOB SHELL GM S-GM815 5B
Our Price: $8.15
FOB SHELL GM S-GM816 3B
Our Price: $8.15
FOB shell for GM vehicles. 3 button. Batteries not included. FOB shell for GM vehicles. 5 button. Batteries not included. FOB shell for GM vehicles. 3 button. Batteries not included.
FOB SHELL GM S-GM817 5B       FOB SHELL HONDA S-HON800      FOB SHELL HONDA S-HON801
FOB SHELL GM S-GM817 5B
Our Price: $8.15
FOB shell for GM vehicles. 5 button. Batteries not included. FOB shell for Honda vehicles. 5 button. Batteries not included. FOB shell for Honda vehicles. 6 button. Batteries not included.
FOB SHELL HONDA S-HON802      FOB SHELL MAZDA S-MAZ800      FOB SHELL NISSAN S-NIS800
FOB shell for Honda vehicles. 5 button. Batteries not included. FOB shell for Mazada vehicles. 3 button. Batteries not included. FOB shell for Nissan vehicles. 3 button. Batteries not included.
FOB SHELL NISSAN S-NIS801     FOB SHELL TOYOTA S-TOY800     FOB SHELL TOYOTA S-TOY801
FOB shell for Nissan vehicles. 4 button. Batteries not included. FOB shell for Toyota vehicles. 2 button. Batteries not included. FOB shell for Toyota vehicles. 4 button. Batteries not included.
FOB SHELL TOYOTA S-TOY802     FOB SHELL TOYOTA S-TOY803     FOB SHELL TOYOTA S-TOY804
FOB shell for Toyota vehicles. 3 button. Batteries not included. FOB shell for Toyota vehicles. 4 button. Batteries not included. FOB shell for Toyota vehicles. 5 button. Batteries not included.
FOB SHELL TOYOTA S-TOY805     M-D 78212 Extra Wide Fluted Carpet Trim M-D 43878 Fluted Stair Edging
FOB shell for Toyota vehicles. 6 button. Batteries not included. Extra wide carpet trim covers, protects and provides a finished edge. Includes screw nails to secure trim to carpet. Fluted edging protects and improves the appearance of stair edges. 1/8"H.
M-D 43872 Wide Fluted Seam Binder Frost King UDB36BR Door Bottom Frost King ST175 Interior Flat Saddle Threshold
A708 seam binder covers seams and joints in linoleum, tile, carpet, vinyl and other floor coverings. Includes screw nails to secure edging to the floor. Dual L-shape door bottom for metal or wood doors. Smooth flat top interior threshold. 1/8" Height.
M-D 47000 Door Bottom Frost King ST26A Low Rug Top Threshold Prime Line GD52212 Convex Edge Door Roller
1-3/4" vinyl dual fits variety of 1-3/4" steel or wood doors. Screw or nail on. 3/4" Height. Short stem heavy-duty roller with steel inner race; 10 ball bearings. Contents: 2 roller assemblies. Roller 1-7/8" O.D.
TORSION-LIFT GLV 8FT8X3/32IN  PULLEY GARAGE DOOR GALV 3IN   M-D Ultra Door Sweep with Vinyl Seal
Visual-pack. National Hardware Door Pulley, Series: N280, 3 in Sheave Width, Steel, Galvanized, Includes: Fork, Axle Bolt and Nut, Standards: BHMA A138.18, For Residential Extension Spring Doors 2-1/4"H door sweep with vinyl insert.
M-D 79244 Extra Wide Fluted Carpet Trim Prime Line GD 52183 Aircraft Cable M-D 11056 Flat Top Saddle Threshold
Extra wide carpet trim covers, protects and provides a finished edge. Includes screw nails to secure trim to carpet. Galvanized carbon steel aircraft cable used on 7'H torsion spring doors. Extruded aluminum smooth flat top threshold. Use with low pile carpet or tile. Includes screws.
M-D 05173 Triple Fin Door Sweep M-D 05215 Triple Fin Door Sweep M-D 74187 Wide Fluted Carpet Bar
Triple fin vinyl seal provides superior weathertight seal for uneven floor surfaces. Slotted holes for adjustment. 1-1/4"H. Triple fin vinyl seal provides superior weathertight seal for uneven floor surfaces. Slotted holes for adjustment. 1-1/4"H. Covers, protects and provides a finished edge. Includes screw nails to secure trim to carpet.
Frost King UDS36 Door Bottom M-D 43858 Extra Wide Fluted Carpet Trim Prime Line GD52114 Convex Edge Door Roller
Replaces original steel door bottom. For Stanley and other doors. Seals out drafts, moisture, and dirt. 3/8"H. Polybagged. Extra wide carpet trim covers, protects and provides a finished edge. Includes screw nails to secure trim to carpet. Factory lubricated, steel inner race. Fits 2" standard J-track. Roller 1-7/8" O.D.
Prime Line GD52113 Convex Edge Door Roller CYLINER D-BLT RIM KYD         M-D 82586 Dual Door Bottom
Factory lubricated, steel inner race. Fits 2" standard J-track. Roller 1-7/8" O.D. National Hardware Door Dead Bolt, Series: V7650, Rim Cylinder Pin, 3-1/8 in Overall Length, Steel, Aluminum, 2 in Length Shaft Durable vinyl door bottom has soft vinyl fins to seal against top of threshold and sill. Good for steel doors. Fits 1-3/4" doors.
LOCKS WIDE ZINC PLATED 5-1/2IN Frost King A62/36H Door Sweep Prime Line GD 52101 Aircraft Cable
National Hardware Side Lock, Series: V7646, 5-1/2 in Overall Width, Steel, Zinc Plated Seals door from drafts, dirt, and insects. 36" Length. Galvanized carbon steel aircraft cable used on extension spring doors. 1/8" size replacement for most wood doors; 3/32" size for most fiberglass and aluminum doors.
M-D 6015 L-Shape Door Sweep National Hardware V6 Extra Heavy Door Pull Frost King A79/36H Door Sweep
L-shaped DCV 50 door bottom fits both 1-3/8" and 1-3/4" doors. Seals between bottom of door and threshold to block out air and moisture. Slotted fastener holes allow easy installation and adjustment. 1-3/32" height drip cap and 1/2" height door bottom. National Hardware Door Pull, Extra Heavy, Series: V6, Suitable For Use With: Metal and Wood Doors, 6-3/4 in Length, 1.38 in Width, 1.82 in Depth, Steel, White, Vinyl Coated Lifetime warranty.
Frost King H591FS/6 Fluted Carpet Bar M-D 11882 Flat Door Threshold M-D 08748 Economy Low Threshold with Vinyl Seal
Joins carpet with other types of flooring at a lower height. Covers seams and spaces. Interior hardwood threshold. Economy aluminum threshold, low style. With vinyl seal. 3/4" Height.
Frost King U36H L-Shape Drip Cap Door Bottom M-D 78113 Fluted Tile Edge M-D 08383 Door Threshold With Vinyl Seal
L-shaped door shoe used in conjunction with saddle thresholds. Seals between bottom of door and threshold to block out air and moisture. 3/8"H. Tile edging covers seams and joints in vinyl tile floor coverings. Includes screw nails to secure edging. Standard economy grade extruded aluminum low rug threshold with vinyl seal. Vinyl caulking strips under legs. 3/4" Height.
M-D Ultra 68726 Door Sweep with Vinyl Insert Frost King ST26HRHA High Rug Top Threshold M-D 05702 Triple Fin Door Sweep
Provides a seal between the door bottom and the threshold, blocking air and moisture. Vinyl insert. UL listed, fire labeled. 1-7/8"H. 1" Height. Triple fin vinyl seal provides superior weathertight seal for uneven floor surfaces. Slotted holes for adjustment. 1-1/4"H.
Frost King H433FB/6 Seam Binder M-D Ultra U-Shape Door Bottom with Vinyl Insert T-MOULDING 36IN HARDWOOD UNFIN
Joins floor covering of same height. Covers seams and spaces. U-shaped door shoe with rain drip and 1/2" vinyl insert. UL listed and fire labeled. 1-1/4"H. Compression-fit - holds firmly in place. Fits 1-3/4" thick doors up to 36" wide. 3 steps to install, measure-trim & slide on. Seals gaps up to 3/4".
M-D 5389 Deluxe Door Sweep M-D 05991 Dual U-Shape Door Bottom M-D 06528 Dual U-Shape Door Bottom
Vinyl with heavy aluminum construction to create a high quality, long lasting door sweep. Provides a tight long lasting door seal. Seals gaps up to 3/4" high. Slotted holes for easy adjustment. 2"H. Durable U-shaped vinyl door bottom has soft vinyl fins to seal against top of threshold and sill. Ideal for steel doors. CDB 134 - fits most 1-3/4" steel or wood doors. 1-1/2"H. Durable U-shaped vinyl door bottom has soft vinyl fins to seal against top of threshold and sill. Ideal for steel doors. CDB 134 - fits most 1-3/4" steel or wood doors. 1-1/2"H.
M-D Ultra 69633 Door Sweep with Vinyl Seal M-D 08243 Low Mini Threshold with Replaceable Vinyl Insert M-D 82578 Dual L-Shape Door Bottom
2-1/4"H door sweep with vinyl insert. Heavy-duty, premium extruded aluminum threshold with replaceable vinyl insert. Install on door bottom or on top of existing wooden threshold. 7/16" Height. Commercial, durable vinyl door bottom has soft vinyl fins to seal against top of threshold and sill. Designed to fit "Benchmark" style doors at 1-3/4" thickness. Ideal for steel doors.
DOOR BOTTOM 36IN BEIGE DB370  Frost King H591P/6 Carpet Bar LIFT BTM/RL BRKT 13G 5-11/16IN
All season protection against drafts, moisture, dust and insects. With vinyl bulb and fins. Replaces many 1-3/4" pre-hung style door bottoms. Inserts into slots in bottom of door to provide a weathertight seal. Seals gaps up to 1/2-Inch high. Joins carpet with other types of flooring at a lower height. Covers seams and spaces. National Hardware Bottom Lift and Roller Bracket, Series: V7626, Suitable For Use With: Wood or Metal Garage Doors, 5-11/16 in Length, 13 ga, Steel, Standards: BHMA A138.18
LOCKS WIDE ZINC PLATED 7-1/2IN CABL SPG EXT LFT GLV 12FTX3/32 M-D 43816 Dual L-Shape Door Bottom
LOCKS 7-1/2IN WIDE ZN PLT
Our Price: $10.27
National Hardware Side Lock, Series: V7647, 7-1/2 in Overall Width, Steel, Zinc Plated National Hardware Extension Spring Lift Cable, Series: N280, 3/32 in Cable Diameter, 12 ft Cable Length, Steel Cable, Galvanized Body Finish/Color, Standards: BHMA A138.18, For 7 ft Single or Double Wood or Metal Doors Commercial, durable vinyl door bottom has soft vinyl fins to seal against top of threshold and sill. Designed to fit "Benchmark" style doors at 1-3/4" thickness. Ideal for steel doors.
DOOR BTM VINYL 35-3/4IN BEIGE M-D 85290 Carpet Trim M-D 78139 Fluted Carpet Gripper with Teeth
All season protection against drafts, moisture, dust and insects. Replaces many pre-hung pease style door bottoms. Inserts into slots in bottom of door to provide a weather tight seal. Seals gaps up to 1/2-Inch high. Fits Pease entry doors with slots on bottom of door. Covers and protects carpet edges to provide a finished appearance. Includes screws to secure trim. 5/16"H. Fluted carpet gripper with teeth. Secures stretch-in carpet and protects carpet edge. Includes screw nails to secure trim. 1/2"H.
Frost King H591FB/6 Fluted Carpet Bar Hy-Ko 12005H56 Key Blank with Rubber Head Hy-Ko 12005B106 Key Blank with Rubber Head
Joins carpet with other types of flooring at a lower height. Covers seams and spaces. For use with the following vehicles:  Ford, Lincoln and Mercury. Hy-Ko Key Blank, Automobile, With Rubber Head, For General Motor Vehicle Locks
KEYBLANK NISSAN AUTO DA39P    KEYBLANK LAND RVR AO RV4P     KEYBLANK VOLKSWGN RBRHD VW23P
KEYBLANK LAND RVR AO RV4P
Our Price: $10.35
KEYBLANK SUZUKI AUTO SUZ15P   M-D 78154 Wide Fluted Carpet Trim Prime Line GD52140 Convex Edge Standard Door Roller
Covers, protects and provides a finished edge. Includes screw nails to secure trim to carpet. Factory lubricated, steel inner race. Fits 2" standard J-track. Roller 1-7/8" O.D.
M-D 05512 Concealed Door Bottom with Vinyl Seal Stanley 100875 Adjustable Reversible Stay Roller TORSION-LIFT GLV 8FTX8INX1/8IN
Concealed SDS extruded aluminum door bottom with vinyl seal. 7/16" height. Without screws. Each loose. National Hardware Torsion Spring Lift Cable, Series: N280, 1/8 in Cable Diameter, 8 ft 8 in Cable Length, Steel Cable, Galvanized Body Finish/Color, Standards: BHMA A138.18, For 7 ft Single or Double Wood
CABLE EXT SPRG SFTY 8FT8X1/8IN PULLEY GARAGE DOOR GALV 4IN   M-D Ultra 69633 Door Sweep with Vinyl Seal
National Hardware Safety Cable, Series: N280, 1/8 in Cable Diameter, 8 ft 8 in Cable Length, Steel Cable, Galvanized Body Finish/Color, Includes: (2) Cables and (20 Quick Links, Standards: BHMA A138.18, For Garage Doors With 1 Extension Spring Per Side and For Single Spring Hookups National Hardware Door Pulley, Series: N280, 0.56 in Bore, 4-1/4 in Outer Diameter, 4 in Sheave Width, 1 Grooves, 0.71 in Groove, Hook Mounting, Steel, Galvanized, Includes: Spring Clevis Hook, Nut and Bolt, Standards: BHMA A138.18, Used On Double Car Doors 2-1/4"H door sweep with vinyl insert.
Frost King W79/36H U-Shape Door Bottom Prime Line GD 52197 Bottom Mount Lift Bracket Frost King H4128FS6 Stair Edging
For wood or steel doors. Includes screws. Seals out drafts, moisture, and dirt. 2"H. Fills gaps under doors up to 7/8". Used on both wood and metal doors. Heavy-duty 13 gauge galvanized steel construction and steel cable pin. Accepts a standard 7/16"OD stem roller. Includes left and right hand brackets. Covers and protects the edge of carpeted, wood, or tiled stairs. Reduces wear and tear.
M-D 79087 Fluted Carpet Trim M-D 78089 Fluted Carpet Trim M-D 85233 Smooth Seam Binder
Covers, protects and provides a finished edge. Includes screw nails to secure trim to carpet. Covers, protects and provides a finished edge. Includes screw nails to secure trim to carpet. Seam binder cover seams and joints in linoleum, tile, carpet, vinyl, hardwood and other floor coverings. Includes screws to secure to floor. 1/4"H.
M-D 40124 Wide Carpet Trim M-D 40120 Wide Carpet Trim M-D 40132 Wide Seam Binder
Covers, protects and provides a finished edge. Includes screw nails to secure trim to carpet. Covers, protects and provides a finished edge. Includes screw nails to secure trim to carpet. A708 seam binder cover seams and joints in linoleum, tile, carpet, vinyl and other floor coverings. Includes screw nails to secure edging to the floor.
M-D 40136 Wide Seam Binder M-D Ultra Door Sweep with Vinyl Seal Flex-O-Matic 07237 Door Sweep with Vinyl Seal
A708 seam binder cover seams and joints in linoleum, tile, carpet, vinyl and other floor coverings. Includes screw nails to secure edging to the floor. 2-1/4"H door sweep with vinyl insert. As the door opens, the spring action door sweep automatically raises to clear the carpet. When the door is closed, the door sweep automatically lowers to firmly press against floor or carpet.
Frost King A62/36GAH Door Sweep M-D 43300 Cinch Stick with Vinyl Insert M-D 06395 L-Shape Door Bottom Sweep with Drip Cap
Seals door from drafts, dirt, and insects. 36" Length. Seals bottom of door from drafts, dust, water and insects. No need for drills, screws, screwdrivers or pilot holes. Measure, trim, peel and stick. Specially developed with 3M adhesive technology. L-shaped DCV 50 door bottom fits both 1-3/8" and 1-3/4" doors. Seals between bottom of door and threshold to block out air and moisture. Slotted fastener holes allow easy installation and adjustment. 1-3/32" height drip cap and 1/2" height door bottom.
M-D 06056 L-Shape Door Bottom with Drip Cap Prime Line GD 52100 Extension Spring/Cable 1/8 in OD x 12 ft L M-D 46131 Multi-Floor Transition
L-shaped DCV 50 door bottom fits both 1-3/8" and 1-3/4" doors. Seals between bottom of door and threshold to block out air and moisture. Slotted fastener holes allow easy installation and adjustment. 1-3/32" height drip cap and 1/2" height door bottom. Galvanized carbon steel aircraft cable used on extension spring doors. 1/8" size replacement for most wood doors; 3/32" size for most fiberglass and aluminum doors. Easy DIY installation which adjusts to different floor heights. Can be positioned after floors have been installed.
M-D 05769 Door Sweep Frost King SB36 Brush Door Sweep FOB SHELL CHRYS S-CHRY850 IRHK
Vinyl with heavy aluminum construction to create a high quality, long lasting door sweep. Provides a tight long lasting door seal. Seals gaps up to 3/4" high. Slotted holes for easy adjustment. 2"H. Frost King Brush Door Sweep, Premium, 2 in Width, 36 in Length, Aluminum, Silver, For Commercial or Residential Applications FOB shell for Chrysler vehicles. 3 button. Key blade included. Batteries not included.
FOB SHELL CHRYS S-CHRY851 IRHK FOB SHELL CHRYS S-CHRY852 IRHK FOB SHELL CHRYS S-CHRY853 IRHK
FOB shell for Chrysler vehicles. 3 button. Key blade included. Batteries not included. FOB shell for Chrysler vehicles. 4 button. Key blade included. Batteries not included. FOB shell for Chrysler vehicles. 4 button. Key blade included. Batteries not included.