Home > HARDWARE > WINDOW & DOOR HARDWARE > GARAGE DOOR HARDWARE
Choose a sub category:
GARAGE DOOR HARDWARE
Sort By:
1
Prime Line GD 12150 Extruded Cable Ferrule and Stop Prime Line GD 12149 Extruded Cable Ferrule and Stop Prime Line GD 12152 Extruded Cable Ferrule and Stop
Designed for use with overhead garage door hardware. Ferrules used to clamp cable loops into fixed position while stops finish off cable ends or act as stopping points at any location on cable. Card contains 2 ferrules and 2 stops. Designed for use with overhead garage door hardware. Ferrules used to clamp cable loops into fixed position while stops finish off cable ends or act as stopping points at any location on cable. Card contains 2 ferrules and 2 stops. Designed for use with overhead garage door hardware. Ferrules used to clamp cable loops into fixed position while stops finish off cable ends or act as stopping points at any location on cable. Card contains 2 ferrules and 2 stops.
Prime Line GD 12151 Extruded Cable Ferrule and Stop Stanley 193839 Round Rail Track End Cap Prime Line GD 12153 Extruded Cable Ferrule and Stop
Designed for use with overhead garage door hardware. Ferrules used to clamp cable loops into fixed position while stops finish off cable ends or act as stopping points at any location on cable. Card contains 2 ferrules and 2 stops. With  bolt, nut and washer. Pack loose. Designed for use with overhead garage door hardware. Ferrules used to clamp cable loops into fixed position while stops finish off cable ends or act as stopping points at any location on cable. Card contains 2 ferrules and 2 stops.
Prime Line GD 12154 Extruded Cable Ferrule and Stop M-D 13466 Replacement Threshold Insert with Vinyl Seal M-D 13565 Replacement Threshold Insert with Vinyl Seal
Designed for use with overhead garage door hardware. Ferrules used to clamp cable loops into fixed position while stops finish off cable ends or act as stopping points at any location on cable. Card contains 2 ferrules and 2 stops. Vinyl replacement insert designed specifically to replace damaged or lost original vinyl insert. Fits models standard and economy thresholds. Highest quality vinyl replacement insert designed specifically to replace damaged or lost original vinyl inserts. Fits hardwood models.
M-D 25756 Replacement Threshold Insert BOLT/NUT FLT-HD CARRIAGE 12PK BOLT/NT RBD NK ZN 1/4IN-20X1/2
Vinyl replacement inserts increase the longevity and value of the door sweeps. Use for L and U shaped model door bottom. National Hardware Carriage Bolt and Nut, Series: V7652, 1/4-20 in Thread, Flat Head, 1-3/4 in Thread Length, Steel, Zinc Plated, Used With Wood or Steel Garage Doors National Hardware Bolt and Nut, Series: V7653, 1/4-20 in Thread, 1/2 in Thread Length, Ribbed Neck, Steel, Zinc Plated, Used With Fiberglass Garage Doors
M-D 13417 Replacement Threshold Insert M-D 13524 Replacement Adjustable Threshold Insert with Vinyl Seal National Hardware V6 Extra Heavy Door Pull
Vinyl replacement insert designed specifically to replace damaged or lost original vinyl insert. Adjustable. Highest quality vinyl replacement insert designed specifically to replace damaged or lost original vinyl insert. National Hardware Door Pull, Extra Heavy, Series: V6, Suitable For Use With: Metal and Wood Doors, 6-3/4 in Length, 1.38 in Width, 1.82 in Depth, Steel, Zinc Plated
Stanley 235309 Open Bar Holder M-D 43824 Replacement Threshold Insert with Vinyl Seal M-D 13219 Replacement Threshold Insert with Metal Retainer Strip
Used to reinforce doorways against forced entry by providing secure placement of 2x4 lumber against entry side of door. 2x4 must be slid through the  bar holders. Clearance for 1/4" bolts. Manufactured from hot rolled steel. Replacement seal for M-D Building Deluxe aluminum thresholds. Designed to replace damaged or lost original vinyl inserts. Fits deluxe thresholds.
National Hardware V7638 Lift Handle ROLLER LG STM HD PLN STL 1-7/8 BRACKET RLR BTM/TP GLV 2-1/2IN
National Hardware Lift Handle, Series: V7638, 7-1/4 in Length, Steel, Galvanized, BHMA A138.18 National Hardware Door Roller, Series: V7602, Heavy Duty, Long Stem, 1-7/8 in Roller Diameter, 0.44 in Roller Width, 10 Ball Bearing, 7-9/16 in Overall Length, Plain Steel, 7/16 in Shaft National Roller Bracket, Adjustable, Top Mount, 7/16 in Roller Shaft, Steel, Hot Dip Galvanized, Includes: Bolt and Nut, Class CD1832, Used On Overhead Sectional Wood and Steel Garage Doors
ROLLER STND PLN STL 1-7/8IN   HINGE HI-GALV 7-3/8IN         Stanley 351503 Open Bar Holder
National Hardware Door Roller, Series: V7601, Standard, 1-7/8 in Roller Diameter, 0.44 in Roller Width, 4.38 in Overall Length, Plain Steel, 7/16 in Shaft National Hardware Door Hinge, High, 7-3/8 in Overall Length, 14 ga Steel, Galvanized, BHMA A138.1, NO 1, For Metal and Wood Garage Doors Used to reinforce doorways against forced entry by providing secure placement of 2x4 lumber against entry side of door. 2x4 must be slid through the  bar holders. Clearance for 1/4" bolts. Manufactured from hot rolled steel.
PULLEY GARAGE DOOR GALV 3IN   ROLLER STND PLN STL 1-3/4IN   HINGE HI-GALV 7-3/8IN
National Hardware Door Pulley, Series: N280, 0.56 in Bore, 3 in Outer Diameter, 3 in Sheave Width, 1 Grooves, 0.39 in Groove, Hook Mounting, Steel, Galvanized, Includes: Clevis Hook, Nut and Bolt, Standards: BHMA A138.18, Used On One Car Stretch Spring Door National Hardware Door Roller, Series: V7603, Standard, 1-3/4 in Roller Diameter, 0.31 in Roller Width, 4 in Overall Length, Plain Steel, 7/16 in Shaft National Hardware Door Hinge, High, 7-3/8 in Overall Length, 14 ga Steel, Galvanized, BHMA A138.1, NO 2, For Metal and Wood Garage Doors
Prime Line GD 52109 Garage Door Pulley Stanley 235291 Closed Bar Holder Stanley 104331 Single Side Bracket
BOX RAIL BRACKETS GALV
Our Price: $6.18
Heavy-duty galvanized steel pulley used at stationary or spring positions. Galvanized steel strap and case hardened steel race with steel ball bearings. Factory lubricated. Includes pulley, strap, and axle bolt with nut. Used to reinforce doorways against forced entry by providing secure placement of 2x4 lumber against entry side of door. 2x4 must be slid through the  bar holders. Clearance for 1/4" bolts. Manufactured from hot rolled steel. Designed as a support bracket for Stanley's 105270, 105676, 105213, and 105726 box rail at 24" OC intervals. Includes lags. Display packed.
Prime Line GD52111 Convex Edge Door Roller HINGE HI-GALV 7-3/8IN         Prime Line GD52117 Adjustable Top Mount Roller Fixture
Used on side by side hinge placements for added strength. Factory lubricated, steel inner race with 10 ball bearings. Roller 1-7/8" O.D. National Hardware Door Hinge, High, 7-3/8 in Overall Length, 14 ga Steel, Galvanized, BHMA A138.1, NO 3, For Metal and Wood Garage Doors Used on both wood and metal doors. Heavy-duty galvanized steel construction. Adjustable roller plate. Accepts a standard 7/16"OD stem roller. Includes four 1/4"-20 x 1-7/8" pancake head carriage bolts with nuts.
Prime Line GD 52104 Standard Garage Door Hinge 3 in W Door Leaf National Hardware V6 Extra Heavy Door Pull Prime Line GD 52130 Door Lift Handle
DOOR PULLS 6-3/4IN BLK
Our Price: $6.42
Used by most garage door manufacturers. Roller tube accepts a standard 7/16"OD stem roller. Made of 14 gauge galvanized steel, 3"W overall. Includes four 1/4"-20 x 1-7/8" pancake head carriage bolts with nuts. National Hardware Door Pull, Extra Heavy, Series: V6, Suitable For Use With: Metal and Wood Doors, 6-3/4 in Length, 1.38 in Width, 1.82 in Depth, Steel, Black Replaces most handles currently in use. Galvanized steel construction. Use vertically or horizontally. Includes two 1/4"-20 x 1-7/8" pancake head carriage bolts with nuts.
Prime Line GD52110 Convex Edge Standard Door Roller Prime Line GD 52105 Standard Garage Door Hinge 3 in W Door Leaf Stanley 351502 Closed Bar Holder
Factory lubricated, steel inner race. Fits 2" standard J-track. Roller 1-7/8" O.D. Used by most garage door manufacturers. Roller tube accepts a standard 7/16"OD stem roller. Made of 14 gauge galvanized steel, 3"W overall. Includes four 1/4"-20 x 1-7/8" pancake head carriage bolts with nuts. Used to reinforce doorways against forced entry by providing secure placement of 2x4 lumber against entry side of door. 2x4 must be slid through the  bar holders. Clearance for 1/4" bolts. Manufactured from hot rolled steel.
HINGE HI-GALV 7-3/8IN         Prime Line GD 52106 Standard Garage Door Hinge 3 in W Door Leaf LOCK FOR SHFT ZN PLT 5/16IN SQ
National Hardware Door Hinge, High, 7-3/8 in Overall Length, 14 ga Steel, Galvanized, BHMA A138.1, NO 4, For Metal and Wood Garage Doors Used by most garage door manufacturers. Roller tube accepts a standard 7/16"OD stem roller. Made of 14 gauge galvanized steel, 3"W overall. Includes four 1/4"-20 x 1-7/8" pancake head carriage bolts with nuts. National Hardware Swivel Lock, Series: V7645, Suitable For Use With: 5/16 x 5/16 in Shaft, Steel, Zinc Plated, For Garage Door
ROLLER HD PLN STL 1-7/8IN     Frost King WAT250 Saddle Threshold Stanley 51L2 Double Triangle Bracket
National Hardware Door Roller, Series: V7602, Heavy Duty, Suitable For Use With: Residential Garage Doors, 1-7/8 in Roller Diameter, 10 Ball Bearing, 4-3/8 in Overall Length, Plain Steel, 7/16 in Shaft Wood interior threshold. Covers seams in interior door ways. Designed to support double run of #5114 or #5116 box rail. Suitable for use on corrugated metal siding due to narrow surface. Does not come with rail bracket or fasteners. Can be used as double stop when used with #6008 door stop. 300 lb. safe working load.
Frost King WAT175 Saddle Threshold Stanley 104380 Splice Bracket PULL DOOR GALV 6-3/4IN
DOOR PULLS 6-3/4IN GALV
Our Price: $8.14
Wood interior threshold. Covers seams in interior door ways. Designed to join two pieces of Stanley's 105270, 105676, 105213, and 105726 box rail. Meets ANSI/BHMA A 156.14. Includes lags. National Hardware Door Pull, Series: V6, Extra Heavy, Suitable For Use With: Metal or Wood Doors, 0.29 in Diameter, 6-3/4 in Length, 1.38 in Width, 1.82 in Depth, 0.1 in Plate, Steel, Galvanized, Standards: BHMA A138.18
Frost King ST175 Interior Flat Saddle Threshold Frost King ST26A Low Rug Top Threshold Prime Line GD52212 Convex Edge Door Roller
Smooth flat top interior threshold. 1/8" Height. 3/4" Height. Short stem heavy-duty roller with steel inner race; 10 ball bearings. Contents: 2 roller assemblies. Roller 1-7/8" O.D.
TORSION-LIFT GLV 8FT8X3/32IN  PULLEY GARAGE DOOR GALV 3IN   Prime Line GD 52183 Aircraft Cable
Visual-pack. National Hardware Door Pulley, Series: N280, 3 in Sheave Width, Steel, Galvanized, Includes: Fork, Axle Bolt and Nut, Standards: BHMA A138.18, For Residential Extension Spring Doors Galvanized carbon steel aircraft cable used on 7'H torsion spring doors.
M-D 11056 Flat Top Saddle Threshold Prime Line GD52114 Convex Edge Door Roller Prime Line GD52113 Convex Edge Door Roller
Extruded aluminum smooth flat top threshold. Use with low pile carpet or tile. Includes screws. Factory lubricated, steel inner race. Fits 2" standard J-track. Roller 1-7/8" O.D. Factory lubricated, steel inner race. Fits 2" standard J-track. Roller 1-7/8" O.D.
CYLINER D-BLT RIM KYD         LOCKS WIDE ZINC PLATED 5-1/2IN Prime Line GD 52101 Aircraft Cable
National Hardware Door Dead Bolt, Series: V7650, Rim Cylinder Pin, 3-1/8 in Overall Length, Steel, Aluminum, 2 in Length Shaft National Hardware Side Lock, Series: V7646, 5-1/2 in Overall Width, Steel, Zinc Plated Galvanized carbon steel aircraft cable used on extension spring doors. 1/8" size replacement for most wood doors; 3/32" size for most fiberglass and aluminum doors.
National Hardware V6 Extra Heavy Door Pull M-D 11882 Flat Door Threshold M-D 08748 Economy Low Threshold with Vinyl Seal
National Hardware Door Pull, Extra Heavy, Series: V6, Suitable For Use With: Metal and Wood Doors, 6-3/4 in Length, 1.38 in Width, 1.82 in Depth, Steel, White, Vinyl Coated Interior hardwood threshold. Economy aluminum threshold, low style. With vinyl seal. 3/4" Height.
M-D 08383 Door Threshold With Vinyl Seal Frost King ST26HRHA High Rug Top Threshold M-D 08243 Low Mini Threshold with Replaceable Vinyl Insert
Standard economy grade extruded aluminum low rug threshold with vinyl seal. Vinyl caulking strips under legs. 3/4" Height. 1" Height. Heavy-duty, premium extruded aluminum threshold with replaceable vinyl insert. Install on door bottom or on top of existing wooden threshold. 7/16" Height.
LIFT BTM/RL BRKT 13G 5-11/16IN LOCKS WIDE ZINC PLATED 7-1/2IN CABL SPG EXT LFT GLV 12FTX3/32
LOCKS 7-1/2IN WIDE ZN PLT
Our Price: $10.27
National Hardware Bottom Lift and Roller Bracket, Series: V7626, Suitable For Use With: Wood or Metal Garage Doors, 5-11/16 in Length, 13 ga, Steel, Standards: BHMA A138.18 National Hardware Side Lock, Series: V7647, 7-1/2 in Overall Width, Steel, Zinc Plated National Hardware Extension Spring Lift Cable, Series: N280, 3/32 in Cable Diameter, 12 ft Cable Length, Steel Cable, Galvanized Body Finish/Color, Standards: BHMA A138.18, For 7 ft Single or Double Wood or Metal Doors
Hy-Ko 12005H56 Key Blank with Rubber Head Hy-Ko 12005B106 Key Blank with Rubber Head KEYBLANK NISSAN AUTO DA39P
For use with the following vehicles:  Ford, Lincoln and Mercury. Hy-Ko Key Blank, Automobile, With Rubber Head, For General Motor Vehicle Locks
KEYBLANK LAND RVR AO RV4P     KEYBLANK VOLKSWGN RBRHD VW23P KEYBLANK SUZUKI AUTO SUZ15P
KEYBLANK LAND RVR AO RV4P
Our Price: $10.35
Prime Line GD52140 Convex Edge Standard Door Roller TORSION-LIFT GLV 8FTX8INX1/8IN CABLE EXT SPRG SFTY 8FT8X1/8IN
Factory lubricated, steel inner race. Fits 2" standard J-track. Roller 1-7/8" O.D. National Hardware Torsion Spring Lift Cable, Series: N280, 1/8 in Cable Diameter, 8 ft 8 in Cable Length, Steel Cable, Galvanized Body Finish/Color, Standards: BHMA A138.18, For 7 ft Single or Double Wood National Hardware Safety Cable, Series: N280, 1/8 in Cable Diameter, 8 ft 8 in Cable Length, Steel Cable, Galvanized Body Finish/Color, Includes: (2) Cables and (20 Quick Links, Standards: BHMA A138.18, For Garage Doors With 1 Extension Spring Per Side and For Single Spring Hookups
PULLEY GARAGE DOOR GALV 4IN   Prime Line GD 52197 Bottom Mount Lift Bracket Stanley DP5421BC Single Round Rail Splice Bracket
National Hardware Door Pulley, Series: N280, 0.56 in Bore, 4-1/4 in Outer Diameter, 4 in Sheave Width, 1 Grooves, 0.71 in Groove, Hook Mounting, Steel, Galvanized, Includes: Spring Clevis Hook, Nut and Bolt, Standards: BHMA A138.18, Used On Double Car Doors Used on both wood and metal doors. Heavy-duty 13 gauge galvanized steel construction and steel cable pin. Accepts a standard 7/16"OD stem roller. Includes left and right hand brackets. Designed to be used with #5400 round rail to join and hold two lengths of rail together. Includes lag bolt and spice screws. Splice screws are inserted in holes at the end of round rail. Safe working load 300 lbs.
BRACKET BOX RAIL ZINC         Prime Line GD 52100 Extension Spring/Cable 1/8 in OD x 12 ft L Frost King GA175 Interior Flat Saddle Threshold
BOX RAIL BRACKETS ZINC
Our Price: $10.52
Designed to join #5114 or #5116 box rail. Brackets can be installed on a 2 x 6 header board. Offset nail holes for quick placement. Compatible with 5438 & 5439 snap-on flashing brackets. Includes lag bolt and spice screws. Splice screws are inserted in holes at the end of rail. One splice bracket should be installed on every length of rail to lock it in place. Pack loose. Galvanized carbon steel aircraft cable used on extension spring doors. 1/8" size replacement for most wood doors; 3/32" size for most fiberglass and aluminum doors. Smooth flat top interior threshold. 1/8" Height.
ROD WINDING 2PK               M-D 11908 Flat Door Threshold Prime Line GD 52139 Rim Cylinder Lock
National Hardware Torsion Winding Rod, Series: V7677, Suitable For Use With: Garage Torsion Springs, 1/2 in Dia x 16 in Length, Steel, Plain Interior hardwood threshold. Used to key lock a variety of interior latching mechanisms. Heavy-duty zinc die-cast housing with brass face and 5-pin tumbler lock. Includes cylinder lock with trim ring, 2 keys, mounting plate, and 2 screws.
Prime Line GD 52108 Garage Door Pulley Hy-Ko 12005TR47 Key Blank with Plastic Head Hy-Ko 12005VL8 Key Blank with Rubber Head
Heavy-duty galvanized steel pulley used at stationary or spring positions. Galvanized steel strap and case hardened steel race with steel ball bearings. Factory lubricated. Includes pulley, strap, and axle bolt with nut. Hy-Ko Key Blank, Automobile, 2.9 in Length, 1.3 in Width, Brass, Nickel Plated, With Plastic Head, For Toyota Vehicle Locks Hy-Ko Key Blank, Automobile, Brass, Nickel Plated, With Rubber Head, For Volvo Vehicle Locks
Hy-Ko 12005B51 Key Blank with Rubber Head Hy-Ko 12005Y154 Key Blank Hy-Ko 12005B96 Key Blank with Rubber Head
For use with the following vehicles:  Buick, Cadillac, Chevrolet, Geo, GMC, Oldsmobile, Pontiac and Saturn. For use with the following vehicles:  Chrysler, Dodge, Eagle, Jeep and Plymouth. For use with the following vehicles:  Buick, Cadillac, Chevrolet, Geo, GMC, Oldsmobile, Pontiac and Saturn.
Hy-Ko 12005B108 Key Blank with Rubber Head Hy-Ko 12005B93 Key Blank with Rubber Head Hy-Ko 12005B65 Key Blank with Rubber Head
For use with the following vehicles:  Buick, Cadillac, Chevrolet, Geo, GMC, Oldsmobile, Pontiac and Saturn. For use with the following vehicles:  Buick, Cadillac, Chevrolet, Geo, GMC, Oldsmobile, Pontiac and Saturn. For use with the following vehicles:  Buick, Cadillac, Chevrolet, Geo, GMC, Oldsmobile, Pontiac and Saturn.
Hy-Ko 12005H65 Key Blank with Rubber Head Hy-Ko 12005H71 Key Blank with Rubber Head Hy-Ko 12005Y159 Key Blank
For use with the following vehicles:  Ford, Lincoln and Mercury. For use with the following vehicles:  Ford, Lincoln and Mercury. For use with the following vehicles:  Chrysler, Dodge, Eagle, Jeep and Plymouth.
Hy-Ko 12005Y157 Key Blank Hy-Ko 12005H67 Key Blank with Rubber Head Hy-Ko 12005H62 Key Blank with Rubber Head
For use with the following vehicles:  Chrysler, Dodge, Eagle, Jeep and Plymouth. For use with the following vehicles:  Ford, Lincoln and Mercury. For use with the following vehicles:  Ford, Lincoln and Mercury.
Hy-Ko 12005B80 Key Blank with Rubber Head Hy-Ko 12005Y155 Key Blank Hy-Ko 12005B88 Key Blank with Rubber Head
For use with the following vehicles:  Buick, Cadillac, Chevrolet, Geo, GMC, Oldsmobile, Pontiac and Saturn. For use with the following vehicles:  Chrysler, Dodge, Eagle, Jeep and Plymouth. For use with the following vehicles:  Buick, Cadillac, Chevrolet, Geo, GMC, Oldsmobile, Pontiac and Saturn.
Hy-Ko 12005H75 Key Blank with Rubber Head Hy-Ko 12005B91 Key Blank with Rubber Head Hy-Ko 12005Y153 Key Blank
For use with the following vehicles:  Ford, Lincoln and Mercury. For use with the following vehicles:  Buick, Cadillac, Chevrolet, Geo, GMC, Oldsmobile, Pontiac and Saturn. For use with the following vehicles:  Chrysler, Dodge, Eagle, Jeep and Plymouth.
Hy-Ko 12005B49 Key Blank with Rubber Head Hy-Ko 12005B102 Key Blank with Rubber Head Hy-Ko 12005B45 Key Blank
For use with the following vehicles:  Buick, Cadillac, Chevrolet, Geo, GMC, Oldsmobile, Pontiac and Saturn. For use with the following vehicles:  Buick, Cadillac, Chevrolet, Geo, GMC, Oldsmobile, Pontiac and Saturn. For use with the following vehicles:  Buick, Cadillac, Chevrolet, Geo, GMC, Oldsmobile, Pontiac and Saturn.
Hy-Ko 12005B48 Key Blank with Rubber Head Hy-Ko 12005B86 Key Blank with Rubber Head Hy-Ko 12005H78 Key Blank with Rubber Head
For use with the following vehicles:  Buick, Cadillac, Chevrolet, Geo, GMC, Oldsmobile, Pontiac and Saturn. For use with the following vehicles:  Buick, Cadillac, Chevrolet, Geo, GMC, Oldsmobile, Pontiac and Saturn. For use with the following vehicles:  Ford, Lincoln and Mercury.
Hy-Ko 12005B44 Key Blank Hy-Ko 12005H76 Key Blank with Rubber Head Hy-Ko 12005B77 Key Blank with Rubber Head
For use with the following vehicles:   Buick, Cadillac, Chevrolet, Geo, GMC, Oldsmobile, Pontiac and Saturn. For use with the following vehicles:  Ford, Lincoln and Mercury. For use with the following vehicles:  Buick, Cadillac, Chevrolet, Geo, GMC, Oldsmobile, Pontiac and Saturn.
Hy-Ko 12005B50 Key Blank with Rubber Head Hy-Ko 12005HD96 Key Blank with Rubber Head Hy-Ko 12005B89 Key Blank with Rubber Head
For use with the following vehicles:  Buick, Cadillac, Chevrolet, Geo, GMC, Oldsmobile, Pontiac and Saturn. Hy-Ko Key Blank, Automotive, Brass, Nickel Plated, With Rubber Head, For Honda Vehicle Locks For use with the following vehicles:   Buick, Cadillac, Chevrolet, Geo, GMC, Oldsmobile, Pontiac and Saturn.
Hy-Ko 12005B74 Key Blank with Rubber Head Hy-Ko 13005H75PB Key Blank with Blue Plastic Head Hy-Ko 12005HY12 Key Blank with Plastic Head
For use with the following vehicles:   Buick, Cadillac, Chevrolet, Geo, GMC, Oldsmobile, Pontiac and Saturn. For use with the following vehicles:  Ford, Lincoln and Mercury. Hy-Ko Key Blank, Automobile, 3 in Length, 1.1 in Width, Brass, Nickel Plated, With Plastic Head, For Hyundai Vehicle Locks
Hy-Ko 12005DA38 Key Blank with Rubber Head Hy-Ko 12005BMW3 Key Blank with Rubber Head Hy-Ko 12005B92 Key Blank with Rubber Head
Hy-Ko Key Blank, Automotive, 3.105 in Length, 1.176 in Width, Brass, Nickel Plated, With Rubber Head, For Nissan/Datsun Vehicle Locks Hy-Ko Key Blank, Automobile, Brass, Nickel Plated, With Rubber Head, For BMW Vehicle Locks For use with the following vehicles: Buick, Cadillac, Chevrolet, Geo, GMC, Oldsmobile, Pontiac and Saturn.
Hy-Ko 12005HY14 Key Blank with Plastic Head Hy-Ko 12005MZ27 Key Blank with Rubber Head Hy-Ko 13005TR47PB Key Blank with Plastic Head
Hy-Ko Key Blank, Automobile, 3 in Length, 1.1 in Width, Brass, Nickel Plated, With Plastic Head, For Hyundai Vehicle Locks Hy-Ko Key Blank, Automobile, 3.2 in Length, 1 in Width, Brass, Nickel Plated, With Rubber Head, For Mazda Vehicle Locks Hy-Ko Key Blank, Automobile, Brass, Nickel Plated, with Plastic Head, For Toyota Vehicle Locks
Hy-Ko 12005MZ13 Key Blank with Rubber Head Hy-Ko 12005TR33 Key Blank with Plastic Head Hy-Ko 12005MZ19 Key Blank with Rubber Head
Hy-Ko Key Blank, Automobile, Brass, Nickel Plated, With Rubber Head, For Mazda Vehicle Locks Hy-Ko Key Blank, Automobile, 2-1/2 in Length, 1.2 in Width, Brass, Nickel Plated, With Plastic Head, For Toyota Vehicle Locks Hy-Ko Key Blank, Automobile, 3 in Length, 1 in Width, Brass, Nickel Plated, With Rubber Head, For Mazda Vehicle Locks
Hy-Ko 12005DA25 Key Blank with Rubber Head Hy-Ko 12005MIT4 Key Blank Hy-Ko 12005TR40 Key Blank with Plastic Head
Hy-Ko Key Blank, Automotive, 2.233 in Length, 1.025 in Width, Brass, Nickel Plated, With Rubber Head, For Nissan Vehicle Locks Hy-Ko Key Blank, Automotive, Brass, Nickel Plated, For Mitsubishi Vehicle Locks Hy-Ko Key Blank, Automobile, 2-1/2 in Length, 1.2 in Width, Brass, Nickel Plated, With Plastic Head, For Toyota Vehicle Locks
Hy-Ko 12005HD91 Key Blank with Rubber Head Hy-Ko 12005DA34 Key Blank with Rubber Head Hy-Ko 12005MIT1 Key Blank
Hy-Ko Key Blank, Automotive, Brass, Nickel Plated, With Rubber Head, For Honda Vehicle Locks Hy-Ko Key Blank, Automotive, 3.157 in Length, 1.098 in Width, Brass, Nickel Plated, With Rubber Head, For Nissan/Datsun Vehicle Locks Hy-Ko Key Blank, Automotive, Brass, Nickel Plated, For Mitsubishi Vehicle Locks
Hy-Ko 12005HD103 Key Blank with Rubber Head Hy-Ko 12005DA31 Key Blank with Rubber Head Hy-Ko 12005SUZ17 Key Blank
Hy-Ko Key Blank, Automobile, Brass, Nickel Plated, With Rubber Head, For Honda Vehicle Locks Hy-Ko Key Blank, Automotive, 3.105 in Length, 1.176 in Width, Brass, Nickel Plated, With Rubber Head, For Nissan/Datsun Vehicle Locks Hy-Ko Key Blank, Automobile, 2.7 in Length, 1.2 in Width, Brass, Nickel Plated, For Suzuki Vehicle Locks
Hy-Ko 12005VW37 Key Blank with Plastic Head ROLLER STND ZINC PLATED       KEYBLANK GM AO B72P
KEYBLANK GM AO B72P
Our Price: $11.91
Hy-Ko Key Blank, Automobile, Brass, Nickel Plated, With Plastic Head, For Volkswagen Vehicle Locks 1-3/4" Nylon roller, 4-1/2" stem, 7/16" steel shaft. Visual-pack.
KEYBLANK TOYOTA AUTO TR46P    KEYBLANK HYUNDAI AO HY13P     KEYBLANK HYUNDAI AO HY6P
KEYBLANK HYUNDAI AO HY13P
Our Price: $11.91
KEYBLANK HYUNDAI AO HY6P
Our Price: $11.91
KEYBLANK KIA AO KK2P          KEYBLANK TOYOTA RBRHD TR44P   KEYBLANK NISSAN RBRHD DA37P
KEYBLANK KIA AO KK2P
Our Price: $11.91
KEYBLANK KIA RBRHD KK3P       KEYBLANK GM RBRHD B84P        KEYBLANK AUDI RBRHD V35P
KEYBLANK KIA RBRHD KK3P
Our Price: $11.91
KEYBLANK GM RBRHD B84P
Our Price: $11.91
KEYBLANK AUDI RBRHD V35P
Our Price: $11.91
M-D 09563 Flat Top Saddle Threshold Prime Line GD 52138 Door Slide Lock CABLE SPG EXT LFT GLV 12FTX1/8
Extruded aluminum smooth flat top threshold. Use with low pile carpet or tile. Includes screws. Designed for use with No.GD-52147 outside lock and latch assembly. Galvanized steel, spring-loaded lock with latch bolt release lever. National Hardware Extension Spring Lift Cable, Series: N280, 1/8 in Cable Diameter, 12 ft Cable Length, Steel Cable, Galvanized Body Finish/Color, Standards: BHMA A138.18, For 7 ft Single or Double Wood or Metal Doors
Frost King WAT36H Low Rug Saddle Threshold SHAFT LOCK CHRM 5/16IN SQX4IN M-D 08409 High Threshold with Vinyl Seal
Exterior threshold seals out air and dirt. 5/8" Height. National Hardware Garage Door Handle, Series: V7640, 5.81 in Length, 1.33 in Width, Die-Cast Handle, Steel Shaft, Chrome Plated, 5/16 in Dia x 4 in Length Shaft, For Wood or Metal Garage Doors, Camper Tops and RVs Economy grade standard high rug extruded aluminum threshold, with vinyl seal. Designed for use with thick pile carpet. 1-1/8" Height.
L-HNDL LOCK UNIV CHM          Prime Line GD 52118 Inside Deadlock Prime Line GD 52102 Aircraft Safety Cable Set with Cable Clamps
National Hardware Locking L-Handle, Series: V7641, Universal, Suitable For Use With: Model 7645 Swivel Lock/7654 Snap Lock, Die-Cast Handle, Steel Shaft, Chrome, 5/16 sq-in x 3-11/16 in Shaft, For Wood or Metal Garage Doors, Camper Tops, RVs Works only from inside for extra protection as a night or vacation security lock. Fits most garage doors. Engages slot in vertical track. 7/8"W x 1/8" thick steel slide bolt with heavy-duty galvanized steel housing. Includes lock assembly and four 1/4"-20 x 1-7/8" pancake-head carriage bolts with nuts. Galvanized carbon steel aircraft cable installs through extension springs to prevent injury in case of breakage. Required on California installations. Use 4 cables for dual spring doors.
T-HNDL BLANK 5/16 SQX3IN CHRM M-D 49010 Flat Saddle Threshold M-D 08763 Fluted Saddle Threshold
280-602 BLANK T-HANDLE
Our Price: $12.88
National Hardware Blank T-Handle, Series: V7639, Die-Cast Handle, Steel Shaft, Chrome Plated, Includes: (1) 1/8 in Dia x 5/8 in Length Knurled Pin, (2) 2 Push Retainer For 0.309 sq Shaft, (3) Flat Washer 7/16 in ID and (4) NO 7 x 1 Oval Head Slotted Screws, 5/16 in Dia x 3 in Length Shaft Extruded aluminum smooth flat top threshold. Use with low pile carpet or tile. Includes screws. CT-4 economy fluted top. Extruded aluminum saddle threshold. 1/2" Height.
National Hardware DP51MBC Single Box Rail Bracket LOCKS ALUMINUM                TRUCK-BOX RAIL ZN
BOX RAIL BRACKETS GALV
Our Price: $13.40
LOCKS ALUMINUM
Our Price: $13.44
Designed for mounting #5114 or #5116 box rail. Includes 2 lag bolts, carriage bolt and nut. BHMA A138.18. Suitable for use on corrugated metal siding due to narrow mounting surface on sliding door systems. Adjustable to bring rail closer or further away from building. 300 lb safe working load. 7.12"L x 3.25"W x 2"D. Can be used with flashing with the 5151 flashing bracket. National Hardware Dead Bolt Lock, Series: V7651, 2 Keys, Steel, Aluminum, Includes: (2) Keys, (4) NO 8 x 5/8 Pan Head Phillips Wood Screws, For Wood or Metal Garage Doors Packed With Wheel Trucks Only. Durable one piece, precision formed steel. Comes with self-lubricating Deirin Bearings. Suitable for use with No 59, 5100, 5103, 5104, 5105, 5110, 5114 or 5116 box rail. 225 lb/hanger safe working load, 2.14" diameter. 4.15"L x 3"W x 1.61"D. Standards: BHMA A138.18 specified.
Prime Line GD 52238 Hard Drawn Wire Winding Rod Frost King DT36/36A Low Rug Threshold with Vinyl Insert SHAFT LOCK CHRM 5/16SQX3-3/4IN
Hard-drawn wire rods, the only tool used to wind and unwind tension on torsion springs. With vinyl insert top and vinyl feet for tighter entry way seal. National Hardware Locking T-Handle, Series: V7643, Suitable For Use With: Model 7645 Swivel Lock/7654 Snap Lock, 2 Keys, Die Cast Handle, Steel Shaft, Chrome, Includes: (2) NO 10 x 3/4 Phillips Pan Head Machine Screws and (1) Retainer Washer, 5/16 sq-in x 3-3/4 in Shaft, For Metal or Fiberglass Doors
M-D 11742 Low-Rug Door Threshold M-D 11205 Low Dome Top Saddle Threshold M-D 11346 High Dome Saddle Threshold
Hardwood provides durable residential threshold. Low thermal transfer coefficient of wood helps save energy. Can be painted or stained to match room trim. 3/4" Height. Exterior extruded aluminum threshold with vinyl caulking strips under legs to form a tight seal between the floor and threshold. Includes screws. 5/8" Height. Exterior extruded aluminum threshold with vinyl caulking strips under legs to form a tight seal between floor and threshold. Includes screws. 1" Height.
M-D 08102 Deluxe Door Threshold With Vinyl Seal KEYBLANK SUBARU RBRHD SUB1P   Stanley 160754 Cam Latch
Deluxe heavy-duty threshold. Heavy extruded aluminum threshold with replaceable vinyl insert. Vinyl caulking feet seal bottom of threshold. With insert: 3/4" Height. Without insert: 1/2" Height. Boxed
Prime Line GD 52122 Door T Handle Lock Stanley 161760 Cam Latch M-D 11072 Flat Saddle Threshold
5/16" square shaft, 3"L, replaces most garage door, camper and RV locking handles. Zinc die-cast construction. 1-1/2" hole centers. Includes locking handle and 2 chrome plated solid brass keys. Designed to hold wood and metal doors firmly in place against the door jamb on farm and utility buildings. It also can be used for end gates on stake trucks. Offers 7" hook. Designed for right- or left-hand applications. Pre-punched, reversible strike plate for use on 1-1/2" or 3-1/2" thick door frames. Boxed. Extruded aluminum smooth flat top threshold. Use with low pile carpet or tile. Includes screws.
M-D 10116 Deluxe Low Threshold with Replaceable Vinyl Insert Prime Line GD52169 Door T Handle Lock Prime Line GD 52121 Door T Handle
Deluxe heavy-duty threshold. Heavy extruded aluminum threshold with replaceable vinyl insert. Vinyl caulking feet seal bottom of threshold. With insert: 3/4" Height. Without insert: 1/2" Height. Zinc diecast construction; keyed lock; 5/16" square shaft, 4-5/8" long, 1-1/2" hole centers; replaces many garage door, camper and R.V. locking handles. Screws attach to lock from the inside of door. Contents: 1 locking handle; 2 keys. Used when locking cylinder is mounted separately. 1-1/2" hole centers. Includes 1 die-cast outside handle with 5/16" square x 3"L shaft, and 1 die-cast zinc inside handle with set screw.
Stanley 51EDBC Box Rail End Cap HANDLE OTSD LOCK              National Hardware DP51MSB Single Box Rail Splice Bracket
BOX RAIL BRACKETS GALV
Our Price: $17.91
Designed to press into rail to keep rail free of foreign materials from birds or weather . Can be used as center stop using 3/8" x 2" carriage bolts (not furnished). Often packed with box hangers. National Hardware Outside Locking Handle, Series: V7642, 7-1/2 in Overall Length, Die-Cast Handle, Steel Shaft, Chrome, 5/16 in Dia x 3-1/4 in Length Shaft Designed for mounting #5114 or #5116 box rail. Includes 2 lag bolts, carriage bolt and nut. BHMA A138.18. Suitable for use on corrugated metal siding due to narrow mounting surface on sliding door systems. Adjustable to bring rail closer or further away from building. 300 lb safe working load. 7.12"L x 3.25"W x 2"D. Can be used with flashing with the 5151 flashing bracket. One splice bracket should be installed on every length of rail to lock it in place.
Stanley 348052 Center Latch M-D 08029 Deluxe High Rug Door Threshold With Vinyl Seal Prime Line GD 52119 Deadbolt
National Center Latch, Heavy Duty, 10.63 in Overall Length, 8.13 in Overall Width, 5.88 in Overall Depth, Zinc Plated Premium heavy-duty threshold, with replaceable vinyl insert. Steel retainer holds inserts securely, can't be kicked out. Vinyl caulk feet seal bottom of threshold. 1-1/8" Height. Used by many manufacturers; will replace most locking mechanisms of this type. Painted die-cast inside lock with heavy-duty steel spring bolt. Key cylinder has aluminum face and 5-pin tumbler lock with cylinder ring.
EXTENSION BLACK 110LBX25IN    Prime Line GD 52123 Door Handle Lock EXTENSION BLACK 120LBX25IN
EXTENSION 25X110# BLK
Our Price: $19.42
EXTENSION 25X120# BLK
Our Price: $20.28
National Hardware Extension Spring, Series: 7688, 25 in Nominal, 110 lb Load Capacity, Steel, Black, For 7 ft High Garage Doors 5/16" square shaft, 2-7/8"L, replaces most garage door, camper and RV locking handles. Zinc die-cast construction. 1-3/4" hole centers. Includes locking handle and 2 chrome plated solid brass keys. Color: Black. Boxed.
Stanley 185447 Center Latch Prime Line GD 12202 Extension Spring 25 in L Hy-Ko 11010HD75 Key Blank
Designed for bi-parting wood sliding doors at least 1-1/2" thick. Cam action and adjustable hook holds doors tightly together. Pre-punched, reversible strike plate for use on 1-1/2" or 3-1/2" thick door frames. 15" long hook. Boxed. For use on sectional, overhead, single car fiberglass doors. Use two 70lb springs for each 70lb door (1 on each side). Rated at 10,000 cycles. Includes safety cable, which protects against personal injury and property damage from broken springs. Color-coded and shrink-wrapped for selection ease. Polybagged. For use with Honda's motorcycle.
Hy-Ko 11010HD57 Key Blank Hy-Ko 11010HD74 Key Blank Hy-Ko 11010YH46 Key Blank
For use with Honda's motorcycle. For use with Honda's motorcycle. Hy-Ko Key Blank, Automobile, Brass, Nickel Plated, For Yamaha Vehicle Locks
Hy-Ko 11010YH38 Key Blank EXTENSION BLACK 130LBX25IN    Frost King DAT39H Adjustable Top Threshold
EXTENSION 25X130# BLK
Our Price: $20.78
Hy-Ko Key Blank, Automobile, Brass, Nickel Plated, For Yamaha Vehicle Locks National Hardware Extension Spring, Series: 7690, 25 in Nominal, 130 lb Load Capacity, Steel, Black, For 7 ft High Garage Doors 7/8" (low) to 1-1/16" (high).
M-D 08664 Adjustable Threshold with Vinyl Seal M-D 09415 Low Dome Saddle Threshold EXTENSION BLACK 140LBX25IN
EXTENSION 25X140# BLK
Our Price: $22.16
Designed to compensate for and seal uneven gaps between bottom of door and floor. Four set screws allow for adjustment to seal uneven gaps between bottom of door and floor while vinyl caulk feet seal between threshold and floor. 7/8" to 1-5/16" Height. Exterior extruded aluminum threshold with vinyl caulking strips under legs to form a tight seal between the floor and threshold. Includes screws. 5/8" Height. National Hardware Extension Spring, Series: 7690, 25 in Nominal, 140 lb Load Capacity, Steel, Black, For 7 ft High Garage Doors
Prime Line GD52142 Carded Electric Key Lock Switch EXTENSION BLACK 150LBX25IN    EXTENSION BLACK 150LBX25IN
EXTENSION 25X150# BLK
Our Price: $22.47
EXTENSION 22X150# BLK
Our Price: $22.47
Allows operation of garage door opener without a transmitter; mount to the exterior door jamb and hard wire to opener. Contents: 1 key cylinder with plastic housing and face plate assembly; 2 keys. National Hardware Extension Spring, Series: 7690, 25 in Nominal, 150 lb Load Capacity, Steel, Black, For 7 ft High Garage Doors National Hardware Extension Spring, Series: 7691, 22 in Nominal, 150 lb Load Capacity, Steel, Black, For 7 ft High Garage Doors
M-D 10017 Deluxe High Threshold Prime Line GD 12191 Extension Spring 25 in L M-D Ultra 68320 Fluted Saddle Threshold
Premium heavy-duty threshold, with replaceable vinyl insert. Steel retainer holds inserts securely, can't be kicked out. Vinyl caulk feet seal bottom of threshold. 1-1/8" Height. For use on sectional, overhead, wood doors 8'W x up to 6'6"H, 2 panel/4 section; or fiberglass doors 16'W x up to 7'H, 4 section. Use two 110lb springs for each 110lb door (1 on each side). Rated at 10,000 cycles. Includes safety cable, which protects against personal injury and property damage from broken springs. Color-coded and shrink-wrapped for selection ease. Polybagged. Ultra commercial threshold used to seal gaps at the bottom of doors. Meets or exceeds ADA requirements. UL fire labeled. Includes screws. Slip resistant.
M-D Ultra Fluted Saddle Threshold Prime Line GD 12192 Extension Spring 25 in L M-D Ultra Flat Smooth Top Threshold
Ultra commercial threshold used to seal gaps at the bottom of doors. Meets or exceeds ADA requirements. UL fire labeled. Includes screws. Slip resistant. 1/2" Height. For use on sectional, overhead, wood doors 8'W x up to 7'H, 2 panel/4 section; or fiberglass doors 16'W x up to 7'H, 4 section. Use two 120lb springs for each 120lb door (1 on each side). Rated at 10,000 cycles. Includes safety cable, which protects against personal injury and property damage from broken springs. Color-coded and shrink-wrapped for selection ease. Polybagged. Extruded aluminum smooth flat top threshold. Use with low pile carpet or tile. Includes screws.
M-D 49004 Deluxe Low Threshold with Vinyl Seal Prime Line GD 12193 Extension Spring 25 in L M-D 49006 Deluxe High Threshold with Vinyl Seal
Deluxe heavy-duty threshold. Heavy extruded aluminum threshold with replaceable vinyl insert. Vinyl caulking feet seal bottom of threshold. With insert: 3/4" Height. Without insert: 1/2" Height. For use on sectional, overhead, wood doors 8'W x up to 7'H, 4 panel/4 section. Use two 130lb springs for each 130lb door (1 on each side). Rated at 10,000 cycles. Includes safety cable, which protects against personal injury and property damage from broken springs. Color-coded and shrink-wrapped for selection ease. Polybagged. Premium heavy-duty threshold, with replaceable vinyl insert. Steel retainer holds inserts securely, can't be kicked out. Vinyl caulk feet seal bottom of threshold. 1-1/8" Height.
M-D Ultra Fluted Saddle Threshold Prime Line GD 12194 Extension Spring 25 in L EXTENSION BLACK 160LBX25IN
EXTENSION 25X160# BLK
Our Price: $24.64
Ultra commercial threshold used to seal gaps at the bottom of doors. Meets or exceeds ADA requirements. UL fire labeled. Includes screws. Slip resistant. For use on sectional, overhead, wood doors 9'W x up to 7'H, 2 panel/4 section; or wood doors 16'W x up to 7'H, 2 panel/4 section. Use two 140lb springs for each 9'W 140lb door (1 each side); use 4 springs for each 16'W 140lb door (2 on each side). Rated at 10,000 cycles. Includes safety cable, which protects against personal injury and property damage from broken springs. Color-coded and shrink-wrapped for selection ease. Polybagged. National Hardware Extension Spring, Series: 7690, 25 in Nominal, 160 lb Load Capacity, Steel, Black, For 7 ft High Garage Doors
Stanley 5414BC Double Round Rail Bracket M-D 43822 Adjustable Thermal Break Threshold M-D 09365 Deluxe High Threshold with Replaceable Vinyl Insert
Designed to be used with #5400 round rail to mount double runs of rail for by-passing doors to side of building installation. Includes lag bolt, two carriage bolts and two nuts. (1) Bracket should be installed every 2 feet of rail. Suitable for use on corrugated metal siding due to narrow mounting surface. Set screws allow for adjustment to seal uneven gaps between bottom of door and floor for a weathertight seal. "Thermal-Break" design prevents frost build-up on interior surface of threshold. 1-3/8" to 1-5/8" Height. Premium heavy-duty threshold, with replaceable vinyl insert. Steel retainer holds inserts securely, can't be kicked out. Vinyl caulk feet seal bottom of threshold. 1-1/8" Height.
M-D 09043 Deluxe Low Threshold with Vinyl Seal M-D 08151 Deluxe Low Threshold with Replaceable Vinyl Insert M-D 11619 Fluted Saddle Threshold
Deluxe heavy-duty threshold. Heavy extruded aluminum threshold with replaceable vinyl insert. Vinyl caulking feet seal bottom of threshold. With insert: 3/4" Height. Without insert: 1/2" Height. Deluxe heavy-duty threshold. Heavy extruded aluminum threshold with replaceable vinyl insert. Vinyl caulking feet seal bottom of threshold. With insert: 3/4" Height. Without insert: 1/2" Height. Commercial heavy-duty extruded aluminum threshold. Meets or exceeds ADA requirements. UL fire labeled. Slip resistant. 1/2" Height.
Stanley 105676 Rail Track Prime Line GD 12195 Extension Spring 25 in L M-D Ultra Fluted Saddle Threshold
Designed for use on doors weighing up to 450 pounds. Rail drilled 24" OC for brackets. Can be used with many types of single and multiple brackets. Screws included. Meets ANSI/BHMA A 156.14, Grade 1. Rail is formed to give an even tread to hanger wheels. For use on sectional, overhead, wood doors 9'W x 7'H, 4 panel/4 section; or wood doors 16'W x 7'H, 4 panel/4 section. Use two 150lb springs for each 9'W 150lb door (1 each side); use 4 springs for each 16'W 150lb door (2 on each side). Rated at 10,000 cycles. Includes safety cable, which protects against personal injury and property damage from broken springs. Color-coded and shrink-wrapped for selection ease. Polybagged. Ultra commercial threshold used to seal gaps at the bottom of doors. Meets or exceeds ADA requirements. UL fire labeled. Includes screws. Slip resistant.
Hy-Ko 18GM100 Key Blank Hy-Ko 18MAZ100 Key Blank Hy-Ko 18HON102 Key Blank with Plastic Head
Contains a computer chip in the head of the key programmed to the vehicle's security system. The ChipKey blank is first electronically programmed with Hy-Ko's C3 I-tool and then cut on a standard key cutting machine. Duplicate keys requires programming the matching code in order to operate the vehicle. Waterproof. Contains a computer chip in the head of the key programmed to the vehicle's security system. The ChipKey blank is first electronically programmed with Hy-Ko's C3 I-tool and then cut on a standard key cutting machine. Duplicate keys requires programming the matching code in order to operate the vehicle. Waterproof. Contains a computer chip in the head of the key programmed to the vehicle's security system; the ChipKey blank is first electronically programmed with Hy-Ko's C3 I-tool and then cut on a standard key cutting machine; duplicate keys requires programming the matching code in order to operate the vehicle; waterproof.