Home > HARDWARE > WINDOW & DOOR HARDWARE > BARN DOOR HARDWARE > BARN DOOR GUIDES
Choose a sub category:
BARN DOOR TRACK / BRACKETS BARN DOOR TRACK / BRACKETS BARN DOOR HANGERS
BARN DOOR HANGERS BARN DOOR GUIDES BARN DOOR GUIDES
BARN DOOR PULLS / LATCHES BARN DOOR PULLS / LATCHES
Sort By:
1
Prime Line GD 12150 Extruded Cable Ferrule and Stop Prime Line GD 12149 Extruded Cable Ferrule and Stop Prime Line GD 12152 Extruded Cable Ferrule and Stop
Designed for use with overhead garage door hardware. Ferrules used to clamp cable loops into fixed position while stops finish off cable ends or act as stopping points at any location on cable. Card contains 2 ferrules and 2 stops. Designed for use with overhead garage door hardware. Ferrules used to clamp cable loops into fixed position while stops finish off cable ends or act as stopping points at any location on cable. Card contains 2 ferrules and 2 stops. Designed for use with overhead garage door hardware. Ferrules used to clamp cable loops into fixed position while stops finish off cable ends or act as stopping points at any location on cable. Card contains 2 ferrules and 2 stops.
Prime Line GD 12151 Extruded Cable Ferrule and Stop Prime Line M-6014 Swinging Shower Door Catch Prime Line M6001 Round Edge Flat Tub Enclosure Roller
Designed for use with overhead garage door hardware. Ferrules used to clamp cable loops into fixed position while stops finish off cable ends or act as stopping points at any location on cable. Card contains 2 ferrules and 2 stops. 1-5/16"W spring-loaded latch assembly for hinged shower doors. 9/16"W x 3/4"L x 1/2"H stainless steel housing with nylon tip. Includes two No.8 x 3/8" Phillips pan head sheet metal screws. Nylon ball bearing roller with threaded hex hub. Contents: 2 rollers with #8-32x3/8 Phillips binder head machine screws.
Prime Line M 6000 Round Edge Flat Tub Enclosure Roller Prime Line M 6003 Round Edge Flat Tub Enclosure Roller Prime Line M 6002 Round Edge Flat Tub Enclosure Roller
1/4"W oval-edge nylon ball bearing wheel with 7/16" threaded hex hub. Includes truss head screw. 1/4"W flat-edge nylon ball bearing wheel with 3/8" threaded hex hub. Includes truss head screw. 1/4"W oval-edge nylon ball bearing wheel with 7/16" threaded hex hub. Includes truss head screw.
Danco 64654B Oval Edge Bagged Door Roller Prime Line M-6040 Tee Shape Tip Shower Door Sweep Prime Line GD 12153 Extruded Cable Ferrule and Stop
Ball bearing construction, nylon wheel with 8-32 threaded center hole and 7-16" hub diameter that extends from back 1/8". 5/32" wide x 3/4" tall for use on hinged shower doors. Designed for use with overhead garage door hardware. Ferrules used to clamp cable loops into fixed position while stops finish off cable ends or act as stopping points at any location on cable. Card contains 2 ferrules and 2 stops.
Prime Line M 6058 Door Guide Prime Line M 6023 Star Shower Door Bottom Seal Prime Line A 127 Door Latch
Used by several shower door manufacturers for sliding tub-enclosure doors. 1"L x 1-9/16"W x 5/8"H overall. Fits 7/16" thick door rails. "Star Tip" shaped; for use on hinged shower doors. Used by several patio door manufacturers. Screw slots allow for vertical adjustments. 7/32"W x 1-3/16"H (not including strike hook). Includes 2 diecast strikes and installation screws.
Prime Line A 111 Door Latch/Pull Prime Line M6067 Door Guide Prime Line GD 12154 Extruded Cable Ferrule and Stop
Non-handed, surface mount, economy pulls, plastic assembly. Contents: 1 black inside pull, 1 black outside pull, #4 8x3/8" Phillips flat head sheet metal screws. 1-7/8"W x 4"H. Injection molded plastic bottom guide fits 7/16" thick door panels. Installed with double sided tape included.  Includes 1 guide. Designed for use with overhead garage door hardware. Ferrules used to clamp cable loops into fixed position while stops finish off cable ends or act as stopping points at any location on cable. Card contains 2 ferrules and 2 stops.
Prime-Line M 6211 Shower Door Bottom Seal Danco 64652B Oval Edge Bagged Door Roller BOLT/NUT FLT-HD CARRIAGE 12PK
T-shaped tip, fits into extrusion slot on bottom of swinging shower door to prevent water from leaking onto floor. Ball bearing construction, nylon wheel with 8-32 threaded center hole and 7-16" hub diameter that extends from back 1/8". National Hardware Carriage Bolt and Nut, Series: V7652, 1/4-20 in Thread, Flat Head, 1-3/4 in Thread Length, Steel, Zinc Plated, Used With Wood or Steel Garage Doors
BOLT/NT RBD NK ZN 1/4IN-20X1/2 Prime Line M 6022 Flat Shower Door Bottom Seal SEAL SHOWER DR RUBBER 5/8X38IN
National Hardware Bolt and Nut, Series: V7653, 1/4-20 in Thread, 1/2 in Thread Length, Ribbed Neck, Steel, Zinc Plated, Used With Fiberglass Garage Doors For use on hinged shower doors.
National Hardware V7638 Lift Handle ROLLER LG STM HD PLN STL 1-7/8 BRACKET RLR BTM/TP GLV 2-1/2IN
National Hardware Lift Handle, Series: V7638, 7-1/4 in Length, Steel, Galvanized, BHMA A138.18 National Hardware Door Roller, Series: V7602, Heavy Duty, Long Stem, 1-7/8 in Roller Diameter, 0.44 in Roller Width, 10 Ball Bearing, 7-9/16 in Overall Length, Plain Steel, 7/16 in Shaft National Roller Bracket, Adjustable, Top Mount, 7/16 in Roller Shaft, Steel, Hot Dip Galvanized, Includes: Bolt and Nut, Class CD1832, Used On Overhead Sectional Wood and Steel Garage Doors
ROLLER STND PLN STL 1-7/8IN   HINGE HI-GALV 7-3/8IN         Prime Line GD 52109 Garage Door Pulley
National Hardware Door Roller, Series: V7601, Standard, 1-7/8 in Roller Diameter, 0.44 in Roller Width, 4.38 in Overall Length, Plain Steel, 7/16 in Shaft National Hardware Door Hinge, High, 7-3/8 in Overall Length, 14 ga Steel, Galvanized, BHMA A138.1, NO 1, For Metal and Wood Garage Doors Heavy-duty galvanized steel pulley used at stationary or spring positions. Galvanized steel strap and case hardened steel race with steel ball bearings. Factory lubricated. Includes pulley, strap, and axle bolt with nut.
Prime Line GD52111 Convex Edge Door Roller Prime Line M 6054 Shower Door Roller Assembly PULLEY GARAGE DOOR GALV 3IN
Used on side by side hinge placements for added strength. Factory lubricated, steel inner race with 10 ball bearings. Roller 1-7/8" O.D. Extruded aluminum bracket; 3/4" diameter flat edge, nylon ball bearing roller; thru-glass 1/4" binder post; used on frameless shower doors.Contents: 2 roller assemblies; 2 sets of installation screws. National Hardware Door Pulley, Series: N280, 0.56 in Bore, 3 in Outer Diameter, 3 in Sheave Width, 1 Grooves, 0.39 in Groove, Hook Mounting, Steel, Galvanized, Includes: Clevis Hook, Nut and Bolt, Standards: BHMA A138.18, Used On One Car Stretch Spring Door
ROLLER STND PLN STL 1-3/4IN   HINGE HI-GALV 7-3/8IN         Prime Line A 150 Cross Latch and Pull
National Hardware Door Roller, Series: V7603, Standard, 1-3/4 in Roller Diameter, 0.31 in Roller Width, 4 in Overall Length, Plain Steel, 7/16 in Shaft National Hardware Door Hinge, High, 7-3/8 in Overall Length, 14 ga Steel, Galvanized, BHMA A138.1, NO 2, For Metal and Wood Garage Doors Used by several door manufacturers for non-handed mortise installations. Sliding activator button designed for Jim Walters sliding roll-formed screen door. Includes black plastic inside pull and latch activator, black plastic outside pull, steel latch and installation screws. 2"W x 4"H handles.
Prime Line GD 52104 Standard Garage Door Hinge 3 in W Door Leaf Prime Line A 142 Cross Latch and Pull Prime Line GD52110 Convex Edge Standard Door Roller
Used by most garage door manufacturers. Roller tube accepts a standard 7/16"OD stem roller. Made of 14 gauge galvanized steel, 3"W overall. Includes four 1/4"-20 x 1-7/8" pancake head carriage bolts with nuts. Non-handed; mortise installation; used by several door manufacturers. Includes 1 plastic inside and outside pull, 1 steel latch assembly, 1 plastic activator, 1 pop rivet, and installation screws. Factory lubricated, steel inner race. Fits 2" standard J-track. Roller 1-7/8" O.D.
HINGE HI-GALV 7-3/8IN         Prime Line GD52117 Adjustable Top Mount Roller Fixture Prime Line GD 52105 Standard Garage Door Hinge 3 in W Door Leaf
National Hardware Door Hinge, High, 7-3/8 in Overall Length, 14 ga Steel, Galvanized, BHMA A138.1, NO 3, For Metal and Wood Garage Doors Used on both wood and metal doors. Heavy-duty galvanized steel construction. Adjustable roller plate. Accepts a standard 7/16"OD stem roller. Includes four 1/4"-20 x 1-7/8" pancake head carriage bolts with nuts. Used by most garage door manufacturers. Roller tube accepts a standard 7/16"OD stem roller. Made of 14 gauge galvanized steel, 3"W overall. Includes four 1/4"-20 x 1-7/8" pancake head carriage bolts with nuts.
Prime Line GD 52130 Door Lift Handle Prime Line GD 52106 Standard Garage Door Hinge 3 in W Door Leaf SEAL SHOWER DR RUBBER 3/8X48IN
Replaces most handles currently in use. Galvanized steel construction. Use vertically or horizontally. Includes two 1/4"-20 x 1-7/8" pancake head carriage bolts with nuts. Used by most garage door manufacturers. Roller tube accepts a standard 7/16"OD stem roller. Made of 14 gauge galvanized steel, 3"W overall. Includes four 1/4"-20 x 1-7/8" pancake head carriage bolts with nuts.
HINGE HI-GALV 7-3/8IN         LOCK FOR SHFT ZN PLT 5/16IN SQ ROLLER HD PLN STL 1-7/8IN
National Hardware Door Hinge, High, 7-3/8 in Overall Length, 14 ga Steel, Galvanized, BHMA A138.1, NO 4, For Metal and Wood Garage Doors National Hardware Swivel Lock, Series: V7645, Suitable For Use With: 5/16 x 5/16 in Shaft, Steel, Zinc Plated, For Garage Door National Hardware Door Roller, Series: V7602, Heavy Duty, Suitable For Use With: Residential Garage Doors, 1-7/8 in Roller Diameter, 10 Ball Bearing, 4-3/8 in Overall Length, Plain Steel, 7/16 in Shaft
Prime Line M 6090 Bottom Mount Door Guide Stanley 100834 Door Bumper Prime-Line M 6144 Shower Door Bottom Guide
Nylon bottom guide for sliding tub enclosure doors; fits 1/2" thick door rails; snap-in tabs hold guide to track. Fits On:  International. Contents: 2 guides. Designed for use as a door stop on up to 2" thick sliding doors. Embossed steel for added strength. Display packed. Bottom guide used to keep glass door panels separated. Snaps into place on base of enclosure., Clear vinyl material.
Hampton V1195 Reversible Door Latch Prime Line GD52212 Convex Edge Door Roller TORSION-LIFT GLV 8FT8X3/32IN
Flush mount fits into door stile. 1/16" projection inside/outside of patio door. Reversible for right or left hand application. Packed with 4 different latch hooks to fit virtually all applications. For 1" to 1-1/4" thick doors. 6-1/2" distance between attaching screws. Short stem heavy-duty roller with steel inner race; 10 ball bearings. Contents: 2 roller assemblies. Roller 1-7/8" O.D. Visual-pack.
PULLEY GARAGE DOOR GALV 3IN   Frost King ST175 Interior Flat Saddle Threshold Prime Line GD 52183 Aircraft Cable
National Hardware Door Pulley, Series: N280, 3 in Sheave Width, Steel, Galvanized, Includes: Fork, Axle Bolt and Nut, Standards: BHMA A138.18, For Residential Extension Spring Doors Smooth flat top interior threshold. 1/8" Height. Galvanized carbon steel aircraft cable used on 7'H torsion spring doors.
Prime Line GD52113 Convex Edge Door Roller M-D 11056 Flat Top Saddle Threshold CYLINER D-BLT RIM KYD
Factory lubricated, steel inner race. Fits 2" standard J-track. Roller 1-7/8" O.D. Extruded aluminum smooth flat top threshold. Use with low pile carpet or tile. Includes screws. National Hardware Door Dead Bolt, Series: V7650, Rim Cylinder Pin, 3-1/8 in Overall Length, Steel, Aluminum, 2 in Length Shaft
LOCKS WIDE ZINC PLATED 5-1/2IN Prime Line GD 52101 Aircraft Cable Prime Line M 6145 Shower Door Roller Assembly
National Hardware Side Lock, Series: V7646, 5-1/2 in Overall Width, Steel, Zinc Plated Galvanized carbon steel aircraft cable used on extension spring doors. 1/8" size replacement for most wood doors; 3/32" size for most fiberglass and aluminum doors. Extruded aluminum bracket; 3/4" diameter oval edge, nylon ball bearing roller; used on frameless shower doors. Contents: 2 roller assemblies.
Prime Line GD52114 Convex Edge Door Roller LIFT BTM/RL BRKT 13G 5-11/16IN LOCKS WIDE ZINC PLATED 7-1/2IN
Factory lubricated, steel inner race. Fits 2" standard J-track. Roller 1-7/8" O.D. National Hardware Bottom Lift and Roller Bracket, Series: V7626, Suitable For Use With: Wood or Metal Garage Doors, 5-11/16 in Length, 13 ga, Steel, Standards: BHMA A138.18 National Hardware Side Lock, Series: V7647, 7-1/2 in Overall Width, Steel, Zinc Plated
CABL SPG EXT LFT GLV 12FTX3/32 Stanley 100875 Adjustable Reversible Stay Roller Prime Line GD52140 Convex Edge Standard Door Roller
National Hardware Extension Spring Lift Cable, Series: N280, 3/32 in Cable Diameter, 12 ft Cable Length, Steel Cable, Galvanized Body Finish/Color, Standards: BHMA A138.18, For 7 ft Single or Double Wood or Metal Doors Without screws. Each loose. Factory lubricated, steel inner race. Fits 2" standard J-track. Roller 1-7/8" O.D.
TORSION-LIFT GLV 8FTX8INX1/8IN CABLE EXT SPRG SFTY 8FT8X1/8IN PULLEY GARAGE DOOR GALV 4IN
National Hardware Torsion Spring Lift Cable, Series: N280, 1/8 in Cable Diameter, 8 ft 8 in Cable Length, Steel Cable, Galvanized Body Finish/Color, Standards: BHMA A138.18, For 7 ft Single or Double Wood National Hardware Safety Cable, Series: N280, 1/8 in Cable Diameter, 8 ft 8 in Cable Length, Steel Cable, Galvanized Body Finish/Color, Includes: (2) Cables and (20 Quick Links, Standards: BHMA A138.18, For Garage Doors With 1 Extension Spring Per Side and For Single Spring Hookups National Hardware Door Pulley, Series: N280, 0.56 in Bore, 4-1/4 in Outer Diameter, 4 in Sheave Width, 1 Grooves, 0.71 in Groove, Hook Mounting, Steel, Galvanized, Includes: Spring Clevis Hook, Nut and Bolt, Standards: BHMA A138.18, Used On Double Car Doors
Prime Line GD 52197 Bottom Mount Lift Bracket KEYBLANK LOCK PUNDRA PU10     KEYBLANK LOCK FIC FIC2
KEYBLANK LOCK PUNDRA PU10
Our Price: $10.35
KEYBLANK LOCK FIC FIC2
Our Price: $10.35
Used on both wood and metal doors. Heavy-duty 13 gauge galvanized steel construction and steel cable pin. Accepts a standard 7/16"OD stem roller. Includes left and right hand brackets.
KEYBLANK HITCH FULTON FN1     KEYBLANK TOOLBOX TBX1         Prime Line GD 52100 Extension Spring/Cable 1/8 in OD x 12 ft L
KEYBLANK HITCH FULTON FN1
Our Price: $10.35
KEYBLANK TOOLBOX TBX1
Our Price: $10.35
Galvanized carbon steel aircraft cable used on extension spring doors. 1/8" size replacement for most wood doors; 3/32" size for most fiberglass and aluminum doors.
Frost King AT4336A Fluted Saddle Threshold Mintcraft KB20-B Key Blank Dorex KB50-B Key Blank
Deep ribbed for extra traction; 1/2" Height. Key Blank for Orgill Brass Padlock- 3/4"(20mm), # 600.2810. Includes 10pcs per Polybag. Key Blank for Orgill Brass Padlock, 2"(50mm), 2-1/2"(60mm), #'s 600.2869, 600.2877, 012.0147. Includes 10pcs per polybag.
ROD WINDING 2PK               Prime Line GD 52108 Garage Door Pulley Mintcraft KB30-B Key Blank
National Hardware Torsion Winding Rod, Series: V7677, Suitable For Use With: Garage Torsion Springs, 1/2 in Dia x 16 in Length, Steel, Plain Heavy-duty galvanized steel pulley used at stationary or spring positions. Galvanized steel strap and case hardened steel race with steel ball bearings. Factory lubricated. Includes pulley, strap, and axle bolt with nut. Key Blank for Orgill Brass Padlocks - 1-1/4"(30mm), 1-1/2"(40mm) - #600.2828, 600.2836, 600.2844, 600.2851, 010.6930, 246.9286. Includes 10pcs per Polybag.
Frost King ST42/36H Low Rug Saddle Threshold Prime Line C 1190 Door Pull Frost King GA175 Interior Flat Saddle Threshold
Used with door shoes. 5/8" Height. Black diecast supports w/wood handle. Mounting posts come finished in black colored paint, and the wooden pull handle comes finished in a clear finish. Can be installed on doors with mounting hole centers ranging from 6-1/2? to 6-5/8? center-2-center. Surface mounted. Features a sturdy metal backer support behind the wood. Note: Color of wood may vary per shipment. Smooth flat top interior threshold. 1/8" Height.
ROLLER STND ZINC PLATED       Prime Line GD 52138 Door Slide Lock Prime Line GD 52139 Rim Cylinder Lock
1-3/4" Nylon roller, 4-1/2" stem, 7/16" steel shaft. Visual-pack. Designed for use with No.GD-52147 outside lock and latch assembly. Galvanized steel, spring-loaded lock with latch bolt release lever. Used to key lock a variety of interior latching mechanisms. Heavy-duty zinc die-cast housing with brass face and 5-pin tumbler lock. Includes cylinder lock with trim ring, 2 keys, mounting plate, and 2 screws.
CABLE SPG EXT LFT GLV 12FTX1/8 Prime Line M 6191 Bottom Mount Door Hook Guide SHAFT LOCK CHRM 5/16IN SQX4IN
National Hardware Extension Spring Lift Cable, Series: N280, 1/8 in Cable Diameter, 12 ft Cable Length, Steel Cable, Galvanized Body Finish/Color, Standards: BHMA A138.18, For 7 ft Single or Double Wood or Metal Doors Bottom guide for sliding shower enclosure doors. National Hardware Garage Door Handle, Series: V7640, 5.81 in Length, 1.33 in Width, Die-Cast Handle, Steel Shaft, Chrome Plated, 5/16 in Dia x 4 in Length Shaft, For Wood or Metal Garage Doors, Camper Tops and RVs
Hampton V1147H Inside Door Handle L-HNDL LOCK UNIV CHM          Prime Line GD 52118 Inside Deadlock
Designed for use with model V1195 latch set. Oak handle and screws included. 6-1/2" distance between attaching screws. National Hardware Locking L-Handle, Series: V7641, Universal, Suitable For Use With: Model 7645 Swivel Lock/7654 Snap Lock, Die-Cast Handle, Steel Shaft, Chrome, 5/16 sq-in x 3-11/16 in Shaft, For Wood or Metal Garage Doors, Camper Tops, RVs Works only from inside for extra protection as a night or vacation security lock. Fits most garage doors. Engages slot in vertical track. 7/8"W x 1/8" thick steel slide bolt with heavy-duty galvanized steel housing. Includes lock assembly and four 1/4"-20 x 1-7/8" pancake-head carriage bolts with nuts.
Hy-Ko 13005M1PDM Key Blank with Color Dipped Head Hy-Ko 13005SC1PB Key Blank with Blue Plastic Head Hy-Ko 13005SC1PG Key Blank with Green Plastic Head
Hy-Ko Key Blank, Entrance Door, Padlock, Brass, Nickel Plated, With Color Dipped Head, For Master Vehicle Locks Hy-Ko Key Blank, Entrance Door, Padlock, With Blue Plastic Head, For Schlage Vehicle Locks Hy-Ko Key Blank, Entrance Door, Padlock, With Green Plastic Head, For Schlage Vehicle Locks
Hy-Ko 13005KW10PDM Key Blank with Color Dipped Head Hy-Ko 13005KW1PB Key Blank with Blue Plastic Head Hy-Ko 13005SC1PR Key Blank with Red Plastic Head
Hy-Ko Key Blank, Entrance Door, Brass, Nickel Plated, With Color Dipped Head, For Kwikset Vehicle Locks Hy-Ko Key Blank, Entrance Door, Padlock, With Blue Plastic Head, For Kwikset Vehicle Locks Hy-Ko Key Blank, Entrance Door, Padlock, With Red Plastic Head, For Schlage Vehicle Locks
Hy-Ko 13005KW1PG Key Blank with Green Plastic Head Hy-Ko 13005KW1PR Key Blank with Red Plastic Head Hy-Ko 13005KW1PDM Key Blank with Color Dipped Head
Hy-Ko Key Blank, Entrance Door, Padlock, With Green Plastic Head, For Kwikset Vehicle Locks Hy-Ko Key Blank, Entrance Door, Padlock, With Red Plastic Head, For Kwikset Vehicle Locks Hy-Ko Key Blank, Entrance Door, Padlock, With Color Dipped Head, For Kwikset Vehicle Locks
Hy-Ko 13005SC1PDM Key Blank with Color Dipped Head Hy-Ko 13005DE6 Key Blank Hy-Ko 13005SC1PY Key Blank with Yellow Plastic Head
Hy-Ko Key Blank, Entrance Door, Padlock, With Color Dipped Head, For Schlage Vehicle Locks Hy-Ko Key Blank, Entrance Door, Night Latch, Sliding Door, 2.129 in Length, 1.099 in Width, Brass, Nickel Plated, For Dexter Vehicle Locks Hy-Ko Key Blank, Entrance Door, Padlock, With Yellow Plastic Head, For Schlage Vehicle Locks
Hy-Ko 13005KW1PY Key Blank with Yellow Plastic Head KEYBLANK LOCK PUNDRA PU13     Stanley 131490 Adjustable Reversible Stay Roller
KEYBLANK LOCK PUNDRA PU13
Our Price: $11.91
Hy-Ko Key Blank, Entrance Door, Padlock, With Yellow Plastic Head, For Kwikset Vehicle Locks Designed for use as a heavy-duty guide on large, sliding doors up to 3-3/4" thick. Slots in frame provide adjustment for holding doors against wood walls or posts. Delrin wheel is reversible; it can be used either side of frame. Offers sturdy steel frame construction. Meets ANSI/BHMA A 156.14. Roller is adjustable. Includes nail and lag screw holes. Hardened steel bolt for greater strength. Display packed
M-D 09563 Flat Top Saddle Threshold Prime Line GD 52102 Aircraft Safety Cable Set with Cable Clamps T-HNDL BLANK 5/16 SQX3IN CHRM
280-602 BLANK T-HANDLE
Our Price: $12.24
Extruded aluminum smooth flat top threshold. Use with low pile carpet or tile. Includes screws. Galvanized carbon steel aircraft cable installs through extension springs to prevent injury in case of breakage. Required on California installations. Use 4 cables for dual spring doors. National Hardware Blank T-Handle, Series: V7639, Die-Cast Handle, Steel Shaft, Chrome Plated, Includes: (1) 1/8 in Dia x 5/8 in Length Knurled Pin, (2) 2 Push Retainer For 0.309 sq Shaft, (3) Flat Washer 7/16 in ID and (4) NO 7 x 1 Oval Head Slotted Screws, 5/16 in Dia x 3 in Length Shaft
LOCKS ALUMINUM                Stanley 162297 Single Adjustable Door Stop Prime Line C 1043 Door Handle Set
LOCKS ALUMINUM
Our Price: $12.76
National Hardware Dead Bolt Lock, Series: V7651, 2 Keys, Steel, Aluminum, Includes: (2) Keys, (4) NO 8 x 5/8 Pan Head Phillips Wood Screws, For Wood or Metal Garage Doors Designed to engage the bottom of a single TAB-LOC door in either the open or closed position to hold firm against the building. For bi-parting doors stop engages in the open position only, also used on wood frame doors using #6061 or #6062 continuous bottom guides. Slotted holes in each leg allow both lateral and vertical adjustments. Bolt, nut, and washer are included for easy attachment. Boxed. Fits all popular flush lock punch-outs for 1" thick doors. 3/4" x 2-3/4", universal design, die-cast, chrome finish keeper No.E-2040 adjusts vertically. Includes 7-1/4"L x 7/8"W inside and outside pulls, latch on inside pull, keeper, installation fasteners, and 4 assorted hooks (3/8", 3/4", 1/2", and 5/8"). 6-5/8" installation hole spacing.
Prime Line GD 52238 Hard Drawn Wire Winding Rod M-D 49010 Flat Saddle Threshold M-D 08763 Fluted Saddle Threshold
Hard-drawn wire rods, the only tool used to wind and unwind tension on torsion springs. Extruded aluminum smooth flat top threshold. Use with low pile carpet or tile. Includes screws. CT-4 economy fluted top. Extruded aluminum saddle threshold. 1/2" Height.
Prime Line M6158 Shower Door Handleset SHAFT LOCK CHRM 5/16SQX3-3/4IN M-D 11205 Low Dome Top Saddle Threshold
Plated diecast handles; outside handle with threaded studs and inside handle with holes; supplied with stainless steel machine screws. Contents: 1 handle set with installation screws. National Hardware Locking T-Handle, Series: V7643, Suitable For Use With: Model 7645 Swivel Lock/7654 Snap Lock, 2 Keys, Die Cast Handle, Steel Shaft, Chrome, Includes: (2) NO 10 x 3/4 Phillips Pan Head Machine Screws and (1) Retainer Washer, 5/16 sq-in x 3-3/4 in Shaft, For Metal or Fiberglass Doors Exterior extruded aluminum threshold with vinyl caulking strips under legs to form a tight seal between the floor and threshold. Includes screws. 5/8" Height.
Stanley 131706 Single Adjustable Door Guide M-D 11346 High Dome Saddle Threshold Hy-Ko 11005SC1XL Key Blank with X-Large Head
Extra-wide guides are designed for corrugated metal-clad doors, can be used as a door stop when mounted sideways. Curved section of guide may be turned sideways allowing straight access when installing screws. Fasteners are not included. Guides have holes for spikes as well as larger holes for 3/8" lag screw mounting. Guide is adjustable for doors up to 5-1/2" thick. Exterior extruded aluminum threshold with vinyl caulking strips under legs to form a tight seal between floor and threshold. Includes screws. 1" Height. Hy-Ko Key Blank, Entrance Door, Padlock, Brass, Nickel Plated, With X-Large Head, For Schlage Vehicle Locks
Hy-Ko 11005KW1XL Key Blank with X-Large Head Prime Line GD 52121 Door T Handle Prime Line GD 52122 Door T Handle Lock
Hy-Ko Key Blank, Entrance Door, Padlock, With X-Large Head, For Kwikset Vehicle Locks Used when locking cylinder is mounted separately. 1-1/2" hole centers. Includes 1 die-cast outside handle with 5/16" square x 3"L shaft, and 1 die-cast zinc inside handle with set screw. 5/16" square shaft, 3"L, replaces most garage door, camper and RV locking handles. Zinc die-cast construction. 1-1/2" hole centers. Includes locking handle and 2 chrome plated solid brass keys.
Hampton VK1195 Door Lockset M-D 11072 Flat Saddle Threshold HANDLE OTSD LOCK
Flush mount fits into door stile. Projection 1/16" on inside and outside of patio door. Reversible for right or left hand application. Packed with four different latch hooks to fit virtually all applications. Key lock for extra security. For 1" to 1-1/4" thick doors. 6-1/2" distance between attaching screws. Extruded aluminum smooth flat top threshold. Use with low pile carpet or tile. Includes screws. National Hardware Outside Locking Handle, Series: V7642, 7-1/2 in Overall Length, Die-Cast Handle, Steel Shaft, Chrome, 5/16 in Dia x 3-1/4 in Length Shaft
Prime-Line M 6111 Sliding Shower Door Bottom Guide Prime Line GD52169 Door T Handle Lock Hampton VK1104 Locking Reversible Door Handle
Clear acrylic bottom guide for sliding tub enclosure doors. Fits on 1/2" thick panels. Used by Sterling and others. Zinc diecast construction; keyed lock; 5/16" square shaft, 4-5/8" long, 1-1/2" hole centers; replaces many garage door, camper and R.V. locking handles. Screws attach to lock from the inside of door. Contents: 1 locking handle; 2 keys. Internal latching, reversible for right or left hand application. Key lock for extra security. Oak handle. 3-15/16" installation hole spacing. For aluminum doors 1? to 1-1/4? thick?.
EXTENSION BLACK 110LBX25IN    Stanley 160481 Guide Rail Prime Line GD 52119 Deadbolt
EXTENSION 25X110# BLK
Our Price: $18.44
National Hardware Extension Spring, Series: 7688, 25 in Nominal, 110 lb Load Capacity, Steel, Black, For 7 ft High Garage Doors Designed to engage the bottom lateral of TAB-LOC doors to hold door firmly in place and prevent wind damage to both the door and building. Fastens to building using #6005 Guide Rail Brackets. Also used with #6061 or #6062 continuous bottom guides. Includes pre-punched mounting holes to attach #6005 guide rail brackets. Pack loose. Used by many manufacturers; will replace most locking mechanisms of this type. Painted die-cast inside lock with heavy-duty steel spring bolt. Key cylinder has aluminum face and 5-pin tumbler lock with cylinder ring.
Hampton V1104 Reversible Door Latch EXTENSION BLACK 120LBX25IN    Prime Line GD 52123 Door Handle Lock
EXTENSION 25X120# BLK
Our Price: $19.26
For aluminum doors 1? to 1-1/4? thick. Internal latching, reversible for right or left hand application. Oak handle. 3-15/16" installation hole spacing. Color: Black. Boxed. 5/16" square shaft, 2-7/8"L, replaces most garage door, camper and RV locking handles. Zinc die-cast construction. 1-3/4" hole centers. Includes locking handle and 2 chrome plated solid brass keys.
EXTENSION BLACK 130LBX25IN    Prime Line C 1107 Sliding Door Lock Prime Line C-1018 Internal Lock Lever Handle Set
EXTENSION 25X130# BLK
Our Price: $19.74
National Hardware Extension Spring, Series: 7690, 25 in Nominal, 130 lb Load Capacity, Steel, Black, For 7 ft High Garage Doors Designed to fit 90 percent of all internally latched doors including Viking. Reversible for right or left hand openings. Automatic unlatching option to prevent accidental lockouts. No.E-2054 stamped steel sliding-glass-door keeper allows for vertical adjustments. Stained solid wood handle, all other parts of finished die-cast aluminum. Includes inside pull and latch, outside pull, keeper, and installation fasteners. For 1" thick door rails. Designed to fit 90 percent of all internally latched doors including Viking. Reversible for right or left hand openings. Automatic unlatching option to prevent accidental lockouts. No.E-2054 stamped steel sliding-glass-door keeper allows for vertical adjustments. Stained solid wood handle, all other parts of finished die-cast aluminum. Includes inside pull and latch, outside pull, keeper, and installation fasteners. For 1" thick door rails.
HANDLE SLIDING DOOR BLK AL    HANDLE INTERNAL DOOR WOOD     Prime Line GD 12202 Extension Spring 25 in L
Extruded aluminum inside pull; clamp-latch with metal activator; diecast outside pull has knock-out for converting to keyed cylinder lock; latch hook profile is 1/4", projection is 1/2"; used by many patio door manufacturers. Hook style latch, designed to fit 90% of all internally latched doors; reversible right or left hand openings; complete with keeper; locking unit with key; automatic unlatching options prevents accidental lockout. For use on sectional, overhead, single car fiberglass doors. Use two 70lb springs for each 70lb door (1 on each side). Rated at 10,000 cycles. Includes safety cable, which protects against personal injury and property damage from broken springs. Color-coded and shrink-wrapped for selection ease. Polybagged.
Hy-Ko 11010WR2 Key Blank Hy-Ko 11010EA27 Key Blank Hy-Ko 11010B67 Key Blank
Hy-Ko Key Blank, Commercial Door, Padlock, Camper, 2.2 in Length, 1.06 in Width, Brass, Nickel Plated, For Weiser Vehicle Locks Hy-Ko Key Blank, House/Office, 2.1 in Length, 1 in Width, Brass, Nickel Plated, For Eagle Vehicle Locks For use with the following vehicles:  Buick, Cadillac, Chevrolet, Geo, GMC, Oldsmobile, Pontiac and Saturn.
Hy-Ko 11010B46 Key Blank Hy-Ko 11010Y149 Key Blank Hy-Ko 11010B91 Key Blank
For use with the following vehicles:  Buick, Cadillac, Chevrolet, Geo, GMC, Oldsmobile, Pontiac and Saturn. For use with the following vehicles:  Chrysler, Dodge, Eagle, Jeep and Plymouth. For use with the following vehicles:  Buick, Cadillac, Chevrolet, Geo, GMC, Oldsmobile, Pontiac and Saturn.
Hy-Ko 11010B79 Key Blank Hy-Ko 11010H27 Key Blank Hy-Ko 11010B69 Key Blank
For use with the following vehicles:  Buick, Cadillac, Chevrolet, Geo, GMC, Oldsmobile, Pontiac and Saturn. For use with the following vehicles:  Ford, Lincoln and Mercury. For use with the following vehicles:  Buick, Cadillac, Chevrolet, Geo, GMC, Oldsmobile, Pontiac and Saturn.
Hy-Ko 11010H54 Key Blank Hy-Ko 11010Y152 Key Blank Hy-Ko 11010H26 Key Blank
For use with the following vehicles:  Ford, Lincoln and Mercury. For use with the following vehicles:  Chrysler, Dodge, Eagle, Jeep and Plymouth. For use with the following vehicles:  Ford, Lincoln and Mercury.
Hy-Ko 11010B44 Key Blank Hy-Ko 11010Y157 Key Blank Hy-Ko 11010B102 Key Blank
For use with the following vehicles:  Buick, Cadillac, Chevrolet, Geo, GMC, Oldsmobile, Pontiac and Saturn. For use with the following vehicles:  Chrysler, Dodge, Eagle, Jeep and Plymouth. For use with the following vehicles:  Buick, Cadillac, Chevrolet, Geo, GMC, Oldsmobile, Pontiac and Saturn.
Hy-Ko 11010B101 Key Blank Hy-Ko 11010B11 Key Blank Hy-Ko 11010B47 Key Blank
For use with the following vehicles:  Buick, Cadillac, Chevrolet, Geo, GMC, Oldsmobile, Pontiac and Saturn. For use with the following vehicles:  Buick, Cadillac, Chevrolet, Geo, GMC, Oldsmobile, Pontiac and Saturn. For use with the following vehicles:   Buick, Cadillac, Chevrolet, Geo, GMC, Oldsmobile, Pontiac and Saturn.
Hy-Ko 11010B61 Key Blank Hy-Ko 11010B58 Key Blank Hy-Ko 11010B85 Key Blank
For use with the following vehicles:   Buick, Cadillac, Chevrolet, Geo, GMC, Oldsmobile, Pontiac and Saturn For use with the following vehicles:   Buick, Cadillac, Chevrolet, Geo, GMC, Oldsmobile, Pontiac and Saturn For use with the following vehicles:  Buick, Cadillac, Chevrolet, Geo, GMC, Oldsmobile, Pontiac and Saturn.
Hy-Ko 11010H70 Key Blank Hy-Ko 11010B63 Key Blank Hy-Ko 11010H50 Key Blank
For use with the following vehicles:  Ford, Lincoln and Mercury. For use with the following vehicles:  Buick, Cadillac, Chevrolet, Geo, GMC, Oldsmobile, Pontiac and Saturn. For use with the following vehicles:  Ford, Lincoln and Mercury.
Hy-Ko 11010B52 Key Blank Hy-Ko 11010B10 Key Blank Hy-Ko 11010Y159 Key Blank
For use with the following vehicles:  Buick, Cadillac, Chevrolet, Geo, GMC, Oldsmobile, Pontiac and Saturn. For use with the following vehicles:  Buick, Cadillac, Chevrolet, Geo, GMC, Oldsmobile, Pontiac and Saturn. For use with the following vehicles:  Chrysler, Dodge, Eagle, Jeep and Plymouth.
Hy-Ko 11010B56 Key Blank Hy-Ko 11010H75 Key Blank Hy-Ko 11010H55 Key Blank
For use with the following vehicles:  Buick, Cadillac, Chevrolet, Geo, GMC, Oldsmobile, Pontiac and Saturn. For use with the following vehicles:  Ford, Lincoln and Mercury. For use with the following vehicles:  Ford, Lincoln and Mercury.
Hy-Ko 11010DC1 Key Blank Hy-Ko 11010H67 Key Blank Hy-Ko 11010H60 Key Blank
For use with the following vehicles:  Chrysler, Dodge, Eagle, Jeep and Plymouth. For use with the following vehicles:  Ford, Lincoln and Mercury. For use with the following vehicles:  Ford, Lincoln and Mercury.
Hy-Ko 11010B89 Key Blank Hy-Ko 11010H59 Key Blank Hy-Ko 11010Y12 Key Blank
For use with the following vehicles:  Buick, Cadillac, Chevrolet, Geo, GMC, Oldsmobile, Pontiac and Saturn. For use with the following vehicles:  Ford, Lincoln and Mercury. Hy-Ko Key Blank, Padlock, Storm Door, 1.88 in Length, 0.85 in Width, Brass, Nickel Plated, For Yale Vehicle Locks
Hy-Ko 11010CO87 Key Blank Hy-Ko 11010MD17 Key Blank Hy-Ko 11010B55 Key Blank
Hy-Ko Key Blank, Padlock, 2 in Length, 0.36 in Width, Brass, Nickel Plated, For Corbin Vehicle Locks Hy-Ko Key Blank, Entrance Door, Padlock, 2.2 in Length, 1.1 in Width, Brass, Nickel Plated, For Master/Dexter Vehicle Locks For use with the following vehicles:  Buick, Cadillac, Chevrolet, Geo, GMC, Oldsmobile, Pontiac and Saturn.
Hy-Ko 11010LD2 Key Blank Hy-Ko 11010S4 Key Blank Hy-Ko 11010M60 Key Blank
Hy-Ko Key Blank, Automobile, For Larson Vehicle Locks Hy-Ko Key Blank, Entrance Door, Padlock, 1.97 in Length, 1.1 in Width, Brass, Nickel Plated, For Sargent Vehicle Locks Hy-Ko Key Blank, Padlock, 2.14 in Length, 1.1 in Width, Brass, Nickel Plated, For Master Vehicle Locks
Hy-Ko 11010IN33 Key Blank Hy-Ko 11010PZ1 Key Blank Hy-Ko 11010AP2 Key Blank
Hy-Ko Key Blank, Deadbolt, 2.14 in Length, 0.97 in Width, Brass, Nickel Plated, For ILCO Vehicle Locks Hy-Ko Key Blank, Automobile, Brass, Nickel Plated, For Papaiz Vehicle Locks Hy-Ko Key Blank, Alarm, Storm Door, Brass, Nickel Plated, For Chicago Vehicle Locks
Hy-Ko 11010S1 Key Blank Hy-Ko 11010MIT3 Key Blank Hy-Ko 11010CG27 Key Blank
Hy-Ko Key Blank, Entrance Door, 2 in Length, 1.1 in Width, Brass, Nickel Plated, For Sargent Vehicle Locks Hy-Ko Key Blank, Automotive, Brass, Nickel Plated, For Mitsubishi Vehicle Locks Hy-Ko Key Blank, Desk, File Cabinet, Brass, Nickel Plated, For Chicago Vehicle Locks
Hy-Ko 11010M16 Key Blank Hy-Ko 11010VR5 Key Blank Hy-Ko 11010M2 Key Blank
Hy-Ko Key Blank, Padlock, Snowmobile, 1.89 in Length, 0.93 in Width, Brass, Nickel Plated, For Master Vehicle Locks Hy-Ko Key Blank, Bike Lock, Padlock, 2.2 in Length, 1 in Width, Brass, Nickel Plated, For Viro Vehicle Locks Hy-Ko Key Blank, File Cabinet, Padlock, Suitcase, 1.34 in Length, 0.77 in Width, Brass, Nickel Plated, For Master Vehicle Locks
Hy-Ko 11010TR53 Key Blank Hy-Ko 11010HD96 Key Blank Hy-Ko 11010NA25 Key Blank
Hy-Ko Key Blank, Automobile, Brass, Nickel Plated, For Toyota Vehicle Locks Hy-Ko Key Blank, Automotive, Brass, Nickel Plated, For Honda Vehicle Locks Hy-Ko Key Blank, Deadbolt, Entrance Door, Brass, Nickel Plated, For National Vehicle Locks
Hy-Ko 11010NA12 Key Blank Hy-Ko 11010TR37 Key Blank Hy-Ko 11010M14 Key Blank
Hy-Ko Key Blank, Boat, File Cabinet, Padlock, 2.1 in Length, 0.87 in Width, Brass, Nickel Plated, For National Vehicle Locks Hy-Ko Key Blank, Automobile, Brass, Nickel Plated, For Toyota Vehicle Locks Hy-Ko Key Blank, Padlock, Brass, Nickel Plated, For Master Vehicle Locks
Hy-Ko 11010B86 Key Blank Hy-Ko 11010H51 Key Blank Hy-Ko 11010SC7 Key Blank
For use with the following vehicles:   Buick, Cadillac, Chevrolet, Geo, GMC, Oldsmobile, Pontiac and Saturn. For use with the following vehicles:  Ford, Lincoln and Mercury. Hy-Ko Key Blank, Commercial Door, Entrance Door, For Schlage Vehicle Locks
Hy-Ko 11010S22 Key Blank Hy-Ko 11010IN28 Key Blank Hy-Ko 11010KK4 Key Blank
Hy-Ko Key Blank, Commercial Door, Padlock, Entrance Door, 2.2 in Length, 1.06 in Width, Brass, Nickel Plated, For Sargent Vehicle Locks Hy-Ko Key Blank, Entrance Door, Padlock, Brass, Nickel Plated, For ILCO Vehicle Locks Hy-Ko Key Blank, Automobile, 3 in Length, 1 in Width, Brass, Nickel Plated, For Kia Vehicle Locks
Hy-Ko 11010BN1 Key Blank Hy-Ko 11010S23 Key Blank Hy-Ko 11010Y1E Key Blank
Hy-Ko Key Blank, Automobile, Brass, Nickel Plated, For Bloomer/Hudson Vehicle Locks Hy-Ko Key Blank, Commercial Door, Entrance Door, Brass, Nickel Plated, For Sargent Vehicle Locks Hy-Ko Key Blank, File Cabinet, Padlock, 2.35 in Length, 0.89 in Width, Brass, Nickel Plated, For Yale Vehicle Locks
Hy-Ko 11010NA44 Key Blank Hy-Ko 11010THRM1 Key Blank Hy-Ko 11010RO5 Key Blank
Hy-Ko Key Blank, Automobile, Brass, Nickel Plated, For National Vehicle Locks Hy-Ko Key Blank, Automobile, Thermostat, For General Motor Vehicle Locks Hy-Ko Key Blank, Airplane, Boat, Brass, Nickel Plated, Used with National House Locks and Padlocks
Hy-Ko 11010MZ19 Key Blank Hy-Ko 11010LD1 Key Blank Hy-Ko 11010M19 Key Blank
Hy-Ko Key Blank, Automobile, 3 in Length, 0.97 in Width, Brass, Nickel Plated, For Mazda Vehicle Locks Hy-Ko Key Blank, Automobile, For Larson Vehicle Locks Hy-Ko Key Blank, Padlock, 2.14 in Length, 1 in Width, Brass, Nickel Plated, For master Vehicle Locks
Hy-Ko 11010IN24 Key Blank Hy-Ko 11010IN3 Key Blank Hy-Ko 11010AP5 Key Blank
Hy-Ko Key Blank, Padlock, Storm Door, 1.81 in Length, 1.09 in Width, Brass, Nickel Plated, For ILCO Vehicle Locks Hy-Ko Key Blank, Commercial Door, Padlock, Entrance Door, 2.23 in Length, 1 in Width, Brass, Nickel Plated, For ILCO Vehicle Locks Hy-Ko Key Blank, Bike Lock, Snowmobile, Brass, Nickel Plated, For Chicago Vehicle Locks
Hy-Ko 11010CO91 Key Blank Hy-Ko 11010Y1 Key Blank Hy-Ko 11010SC8 Key Blank
Hy-Ko Key Blank, Commercial Door, Padlock, Entrance Door, 2.13 in Length, 0.95 in Width, Brass, Nickel Plated, For Corbin Vehicle Locks Hy-Ko Key Blank, Entrance Door, Padlock, Storm Door, 2.15 in Length, 0.98 in Width, Brass, Nickel Plated, For Yale Vehicle Locks Hy-Ko Key Blank, Commercial Door, Entrance Door, For Schlage Vehicle Locks
Hy-Ko 11010IN8 Key Blank Hy-Ko 11010DC3 Key Blank Hy-Ko 11010CG6 Key Blank
Hy-Ko Key Blank, Padlock, Storm Door, 1.88 in Length, 0.85 in Width, Brass, Nickel Plated, For ILCO Vehicle Locks For use with the following vehicles:  Chrysler, Dodge, Eagle, Jeep and Plymouth. Hy-Ko Key Blank, Tool Box, 1.509 in Length, 0.839 in Width, Brass, Nickel Plated, For Chicago Vehicle Locks
Hy-Ko 11010SC1D Key Blank Hy-Ko 11010AM3 Key Blank Hy-Ko 11010SC9 Key Blank
Hy-Ko Key Blank, Automobile, For Schlage Vehicle Locks Hy-Ko Key Blank, Padlock, Brass, Nickel Plated, For American Vehicle Locks Hy-Ko Key Blank, Commercial Door, Entrance Door, For Schlage Vehicle Locks
Hy-Ko 11010Y14 Key Blank Hy-Ko 11010WTP1 Key Blank Hy-Ko 11010WK1 Key Blank
Hy-Ko Key Blank, Padlock, Storm Door, 1.88 in Length, 0.85 in Width, Brass, Nickel Plated, For Yale Vehicle Locks Hy-Ko Key Blank, Storm Door, Brass, Nickel Plated, For Wright Vehicle Locks Hy-Ko Key Blank, Entrance Door, Brass, Nickel Pla