Home > HARDWARE > WINDOW & DOOR HARDWARE > BARN DOOR HARDWARE > BARN DOOR HANGERS
Choose a sub category:
SHOWER DOOR REPAIR PARTS
Sort By:
1
Prime Line GD 12150 Extruded Cable Ferrule and Stop Prime Line GD 12149 Extruded Cable Ferrule and Stop Prime Line GD 12152 Extruded Cable Ferrule and Stop
Designed for use with overhead garage door hardware. Ferrules used to clamp cable loops into fixed position while stops finish off cable ends or act as stopping points at any location on cable. Card contains 2 ferrules and 2 stops. Designed for use with overhead garage door hardware. Ferrules used to clamp cable loops into fixed position while stops finish off cable ends or act as stopping points at any location on cable. Card contains 2 ferrules and 2 stops. Designed for use with overhead garage door hardware. Ferrules used to clamp cable loops into fixed position while stops finish off cable ends or act as stopping points at any location on cable. Card contains 2 ferrules and 2 stops.
Prime Line GD 12151 Extruded Cable Ferrule and Stop Prime Line M6001 Round Edge Flat Tub Enclosure Roller Prime Line M 6000 Round Edge Flat Tub Enclosure Roller
Designed for use with overhead garage door hardware. Ferrules used to clamp cable loops into fixed position while stops finish off cable ends or act as stopping points at any location on cable. Card contains 2 ferrules and 2 stops. Nylon ball bearing roller with threaded hex hub. Contents: 2 rollers with #8-32x3/8 Phillips binder head machine screws. 1/4"W oval-edge nylon ball bearing wheel with 7/16" threaded hex hub. Includes truss head screw.
Prime Line M-6014 Swinging Shower Door Catch Prime Line M 6002 Round Edge Flat Tub Enclosure Roller Prime Line M 6003 Round Edge Flat Tub Enclosure Roller
1-5/16"W spring-loaded latch assembly for hinged shower doors. 9/16"W x 3/4"L x 1/2"H stainless steel housing with nylon tip. Includes two No.8 x 3/8" Phillips pan head sheet metal screws. 1/4"W oval-edge nylon ball bearing wheel with 7/16" threaded hex hub. Includes truss head screw. 1/4"W flat-edge nylon ball bearing wheel with 3/8" threaded hex hub. Includes truss head screw.
Danco 64654B Oval Edge Bagged Door Roller Prime Line M-6040 Tee Shape Tip Shower Door Sweep Stanley 193839 Round Rail Track End Cap
Ball bearing construction, nylon wheel with 8-32 threaded center hole and 7-16" hub diameter that extends from back 1/8". 5/32" wide x 3/4" tall for use on hinged shower doors. With  bolt, nut and washer. Pack loose.
Prime Line M 6058 Door Guide Prime Line M 6023 Star Shower Door Bottom Seal Prime Line GD 12153 Extruded Cable Ferrule and Stop
Used by several shower door manufacturers for sliding tub-enclosure doors. 1"L x 1-9/16"W x 5/8"H overall. Fits 7/16" thick door rails. "Star Tip" shaped; for use on hinged shower doors. Designed for use with overhead garage door hardware. Ferrules used to clamp cable loops into fixed position while stops finish off cable ends or act as stopping points at any location on cable. Card contains 2 ferrules and 2 stops.
Prime Line M6067 Door Guide Prime-Line M 6211 Shower Door Bottom Seal Danco 64652B Oval Edge Bagged Door Roller
Injection molded plastic bottom guide fits 7/16" thick door panels. Installed with double sided tape included.  Includes 1 guide. T-shaped tip, fits into extrusion slot on bottom of swinging shower door to prevent water from leaking onto floor. Ball bearing construction, nylon wheel with 8-32 threaded center hole and 7-16" hub diameter that extends from back 1/8".
Prime Line GD 12154 Extruded Cable Ferrule and Stop BOLT/NUT FLT-HD CARRIAGE 12PK BOLT/NT RBD NK ZN 1/4IN-20X1/2
Designed for use with overhead garage door hardware. Ferrules used to clamp cable loops into fixed position while stops finish off cable ends or act as stopping points at any location on cable. Card contains 2 ferrules and 2 stops. National Hardware Carriage Bolt and Nut, Series: V7652, 1/4-20 in Thread, Flat Head, 1-3/4 in Thread Length, Steel, Zinc Plated, Used With Wood or Steel Garage Doors National Hardware Bolt and Nut, Series: V7653, 1/4-20 in Thread, 1/2 in Thread Length, Ribbed Neck, Steel, Zinc Plated, Used With Fiberglass Garage Doors
Prime Line M 6022 Flat Shower Door Bottom Seal SEAL SHOWER DR RUBBER 5/8X38IN National Hardware V7638 Lift Handle
For use on hinged shower doors. National Hardware Lift Handle, Series: V7638, 7-1/4 in Length, Steel, Galvanized, BHMA A138.18
Prime Line M 6054 Shower Door Roller Assembly ROLLER LG STM HD PLN STL 1-7/8 BRACKET RLR BTM/TP GLV 2-1/2IN
Extruded aluminum bracket; 3/4" diameter flat edge, nylon ball bearing roller; thru-glass 1/4" binder post; used on frameless shower doors.Contents: 2 roller assemblies; 2 sets of installation screws. National Hardware Door Roller, Series: V7602, Heavy Duty, Long Stem, 1-7/8 in Roller Diameter, 0.44 in Roller Width, 10 Ball Bearing, 7-9/16 in Overall Length, Plain Steel, 7/16 in Shaft National Roller Bracket, Adjustable, Top Mount, 7/16 in Roller Shaft, Steel, Hot Dip Galvanized, Includes: Bolt and Nut, Class CD1832, Used On Overhead Sectional Wood and Steel Garage Doors
ROLLER STND PLN STL 1-7/8IN   HINGE HI-GALV 7-3/8IN         PULLEY GARAGE DOOR GALV 3IN
National Hardware Door Roller, Series: V7601, Standard, 1-7/8 in Roller Diameter, 0.44 in Roller Width, 4.38 in Overall Length, Plain Steel, 7/16 in Shaft National Hardware Door Hinge, High, 7-3/8 in Overall Length, 14 ga Steel, Galvanized, BHMA A138.1, NO 1, For Metal and Wood Garage Doors National Hardware Door Pulley, Series: N280, 0.56 in Bore, 3 in Outer Diameter, 3 in Sheave Width, 1 Grooves, 0.39 in Groove, Hook Mounting, Steel, Galvanized, Includes: Clevis Hook, Nut and Bolt, Standards: BHMA A138.18, Used On One Car Stretch Spring Door
ROLLER STND PLN STL 1-3/4IN   HINGE HI-GALV 7-3/8IN         Prime Line GD 52109 Garage Door Pulley
National Hardware Door Roller, Series: V7603, Standard, 1-3/4 in Roller Diameter, 0.31 in Roller Width, 4 in Overall Length, Plain Steel, 7/16 in Shaft National Hardware Door Hinge, High, 7-3/8 in Overall Length, 14 ga Steel, Galvanized, BHMA A138.1, NO 2, For Metal and Wood Garage Doors Heavy-duty galvanized steel pulley used at stationary or spring positions. Galvanized steel strap and case hardened steel race with steel ball bearings. Factory lubricated. Includes pulley, strap, and axle bolt with nut.
Stanley 104331 Single Side Bracket Prime Line GD52111 Convex Edge Door Roller SEAL SHOWER DR RUBBER 3/8X48IN
BOX RAIL BRACKETS GALV
Our Price: $6.18
Designed as a support bracket for Stanley's 105270, 105676, 105213, and 105726 box rail at 24" OC intervals. Includes lags. Display packed. Used on side by side hinge placements for added strength. Factory lubricated, steel inner race with 10 ball bearings. Roller 1-7/8" O.D.
HINGE HI-GALV 7-3/8IN         Prime Line GD52117 Adjustable Top Mount Roller Fixture Prime Line GD 52104 Standard Garage Door Hinge 3 in W Door Leaf
National Hardware Door Hinge, High, 7-3/8 in Overall Length, 14 ga Steel, Galvanized, BHMA A138.1, NO 3, For Metal and Wood Garage Doors Used on both wood and metal doors. Heavy-duty galvanized steel construction. Adjustable roller plate. Accepts a standard 7/16"OD stem roller. Includes four 1/4"-20 x 1-7/8" pancake head carriage bolts with nuts. Used by most garage door manufacturers. Roller tube accepts a standard 7/16"OD stem roller. Made of 14 gauge galvanized steel, 3"W overall. Includes four 1/4"-20 x 1-7/8" pancake head carriage bolts with nuts.
Prime Line GD 52130 Door Lift Handle Prime Line GD52110 Convex Edge Standard Door Roller Prime Line GD 52105 Standard Garage Door Hinge 3 in W Door Leaf
Replaces most handles currently in use. Galvanized steel construction. Use vertically or horizontally. Includes two 1/4"-20 x 1-7/8" pancake head carriage bolts with nuts. Factory lubricated, steel inner race. Fits 2" standard J-track. Roller 1-7/8" O.D. Used by most garage door manufacturers. Roller tube accepts a standard 7/16"OD stem roller. Made of 14 gauge galvanized steel, 3"W overall. Includes four 1/4"-20 x 1-7/8" pancake head carriage bolts with nuts.
HINGE HI-GALV 7-3/8IN         Prime Line GD 52106 Standard Garage Door Hinge 3 in W Door Leaf LOCK FOR SHFT ZN PLT 5/16IN SQ
National Hardware Door Hinge, High, 7-3/8 in Overall Length, 14 ga Steel, Galvanized, BHMA A138.1, NO 4, For Metal and Wood Garage Doors Used by most garage door manufacturers. Roller tube accepts a standard 7/16"OD stem roller. Made of 14 gauge galvanized steel, 3"W overall. Includes four 1/4"-20 x 1-7/8" pancake head carriage bolts with nuts. National Hardware Swivel Lock, Series: V7645, Suitable For Use With: 5/16 x 5/16 in Shaft, Steel, Zinc Plated, For Garage Door
Prime Line M 6090 Bottom Mount Door Guide ROLLER HD PLN STL 1-7/8IN     Stanley 51L2 Double Triangle Bracket
Nylon bottom guide for sliding tub enclosure doors; fits 1/2" thick door rails; snap-in tabs hold guide to track. Fits On:  International. Contents: 2 guides. National Hardware Door Roller, Series: V7602, Heavy Duty, Suitable For Use With: Residential Garage Doors, 1-7/8 in Roller Diameter, 10 Ball Bearing, 4-3/8 in Overall Length, Plain Steel, 7/16 in Shaft Designed to support double run of #5114 or #5116 box rail. Suitable for use on corrugated metal siding due to narrow surface. Does not come with rail bracket or fasteners. Can be used as double stop when used with #6008 door stop. 300 lb. safe working load.
Prime-Line M 6144 Shower Door Bottom Guide Stanley 104380 Splice Bracket Prime Line GD52212 Convex Edge Door Roller
Bottom guide used to keep glass door panels separated. Snaps into place on base of enclosure., Clear vinyl material. Designed to join two pieces of Stanley's 105270, 105676, 105213, and 105726 box rail. Meets ANSI/BHMA A 156.14. Includes lags. Short stem heavy-duty roller with steel inner race; 10 ball bearings. Contents: 2 roller assemblies. Roller 1-7/8" O.D.
TORSION-LIFT GLV 8FT8X3/32IN  PULLEY GARAGE DOOR GALV 3IN   Prime Line GD 52183 Aircraft Cable
Visual-pack. National Hardware Door Pulley, Series: N280, 3 in Sheave Width, Steel, Galvanized, Includes: Fork, Axle Bolt and Nut, Standards: BHMA A138.18, For Residential Extension Spring Doors Galvanized carbon steel aircraft cable used on 7'H torsion spring doors.
Prime Line GD52114 Convex Edge Door Roller Prime Line M 6145 Shower Door Roller Assembly Prime Line GD52113 Convex Edge Door Roller
Factory lubricated, steel inner race. Fits 2" standard J-track. Roller 1-7/8" O.D. Extruded aluminum bracket; 3/4" diameter oval edge, nylon ball bearing roller; used on frameless shower doors. Contents: 2 roller assemblies. Factory lubricated, steel inner race. Fits 2" standard J-track. Roller 1-7/8" O.D.
CYLINER D-BLT RIM KYD         LOCKS WIDE ZINC PLATED 5-1/2IN Prime Line GD 52101 Aircraft Cable
National Hardware Door Dead Bolt, Series: V7650, Rim Cylinder Pin, 3-1/8 in Overall Length, Steel, Aluminum, 2 in Length Shaft National Hardware Side Lock, Series: V7646, 5-1/2 in Overall Width, Steel, Zinc Plated Galvanized carbon steel aircraft cable used on extension spring doors. 1/8" size replacement for most wood doors; 3/32" size for most fiberglass and aluminum doors.
LIFT BTM/RL BRKT 13G 5-11/16IN LOCKS WIDE ZINC PLATED 7-1/2IN CABL SPG EXT LFT GLV 12FTX3/32
LOCKS 7-1/2IN WIDE ZN PLT
Our Price: $10.27
National Hardware Bottom Lift and Roller Bracket, Series: V7626, Suitable For Use With: Wood or Metal Garage Doors, 5-11/16 in Length, 13 ga, Steel, Standards: BHMA A138.18 National Hardware Side Lock, Series: V7647, 7-1/2 in Overall Width, Steel, Zinc Plated National Hardware Extension Spring Lift Cable, Series: N280, 3/32 in Cable Diameter, 12 ft Cable Length, Steel Cable, Galvanized Body Finish/Color, Standards: BHMA A138.18, For 7 ft Single or Double Wood or Metal Doors
Hy-Ko 12005H56 Key Blank with Rubber Head Hy-Ko 12005B106 Key Blank with Rubber Head KEYBLANK MASTER COLORHD M1PC
For use with the following vehicles:  Ford, Lincoln and Mercury. Hy-Ko Key Blank, Automobile, With Rubber Head, For General Motor Vehicle Locks
KEYBLANK NISSAN AUTO DA39P    KEYBLANK LAND RVR AO RV4P     KEYBLANK VOLKSWGN RBRHD VW23P
KEYBLANK LAND RVR AO RV4P
Our Price: $10.35
KEYBLANK SUZUKI AUTO SUZ15P   Prime Line GD52140 Convex Edge Standard Door Roller TORSION-LIFT GLV 8FTX8INX1/8IN
Factory lubricated, steel inner race. Fits 2" standard J-track. Roller 1-7/8" O.D. National Hardware Torsion Spring Lift Cable, Series: N280, 1/8 in Cable Diameter, 8 ft 8 in Cable Length, Steel Cable, Galvanized Body Finish/Color, Standards: BHMA A138.18, For 7 ft Single or Double Wood
CABLE EXT SPRG SFTY 8FT8X1/8IN PULLEY GARAGE DOOR GALV 4IN   Prime Line GD 52197 Bottom Mount Lift Bracket
National Hardware Safety Cable, Series: N280, 1/8 in Cable Diameter, 8 ft 8 in Cable Length, Steel Cable, Galvanized Body Finish/Color, Includes: (2) Cables and (20 Quick Links, Standards: BHMA A138.18, For Garage Doors With 1 Extension Spring Per Side and For Single Spring Hookups National Hardware Door Pulley, Series: N280, 0.56 in Bore, 4-1/4 in Outer Diameter, 4 in Sheave Width, 1 Grooves, 0.71 in Groove, Hook Mounting, Steel, Galvanized, Includes: Spring Clevis Hook, Nut and Bolt, Standards: BHMA A138.18, Used On Double Car Doors Used on both wood and metal doors. Heavy-duty 13 gauge galvanized steel construction and steel cable pin. Accepts a standard 7/16"OD stem roller. Includes left and right hand brackets.
Stanley DP5421BC Single Round Rail Splice Bracket BRACKET BOX RAIL ZINC         Prime Line GD 52100 Extension Spring/Cable 1/8 in OD x 12 ft L
BOX RAIL BRACKETS ZINC
Our Price: $10.52
Designed to be used with #5400 round rail to join and hold two lengths of rail together. Includes lag bolt and spice screws. Splice screws are inserted in holes at the end of round rail. Safe working load 300 lbs. Designed to join #5114 or #5116 box rail. Brackets can be installed on a 2 x 6 header board. Offset nail holes for quick placement. Compatible with 5438 & 5439 snap-on flashing brackets. Includes lag bolt and spice screws. Splice screws are inserted in holes at the end of rail. One splice bracket should be installed on every length of rail to lock it in place. Pack loose. Galvanized carbon steel aircraft cable used on extension spring doors. 1/8" size replacement for most wood doors; 3/32" size for most fiberglass and aluminum doors.
ROD WINDING 2PK               Prime Line GD 52139 Rim Cylinder Lock Prime Line M 6191 Bottom Mount Door Hook Guide
National Hardware Torsion Winding Rod, Series: V7677, Suitable For Use With: Garage Torsion Springs, 1/2 in Dia x 16 in Length, Steel, Plain Used to key lock a variety of interior latching mechanisms. Heavy-duty zinc die-cast housing with brass face and 5-pin tumbler lock. Includes cylinder lock with trim ring, 2 keys, mounting plate, and 2 screws. Bottom guide for sliding shower enclosure doors.
Prime Line GD 52108 Garage Door Pulley Hy-Ko 12005TR47 Key Blank with Plastic Head Hy-Ko 12005VL8 Key Blank with Rubber Head
Heavy-duty galvanized steel pulley used at stationary or spring positions. Galvanized steel strap and case hardened steel race with steel ball bearings. Factory lubricated. Includes pulley, strap, and axle bolt with nut. Hy-Ko Key Blank, Automobile, 2.9 in Length, 1.3 in Width, Brass, Nickel Plated, With Plastic Head, For Toyota Vehicle Locks Hy-Ko Key Blank, Automobile, Brass, Nickel Plated, With Rubber Head, For Volvo Vehicle Locks
Hy-Ko 12005B51 Key Blank with Rubber Head Hy-Ko 12005Y154 Key Blank Hy-Ko 12005B96 Key Blank with Rubber Head
For use with the following vehicles:  Buick, Cadillac, Chevrolet, Geo, GMC, Oldsmobile, Pontiac and Saturn. For use with the following vehicles:  Chrysler, Dodge, Eagle, Jeep and Plymouth. For use with the following vehicles:  Buick, Cadillac, Chevrolet, Geo, GMC, Oldsmobile, Pontiac and Saturn.
Hy-Ko 12005B108 Key Blank with Rubber Head Hy-Ko 12005B93 Key Blank with Rubber Head Hy-Ko 12005B65 Key Blank with Rubber Head
For use with the following vehicles:  Buick, Cadillac, Chevrolet, Geo, GMC, Oldsmobile, Pontiac and Saturn. For use with the following vehicles:  Buick, Cadillac, Chevrolet, Geo, GMC, Oldsmobile, Pontiac and Saturn. For use with the following vehicles:  Buick, Cadillac, Chevrolet, Geo, GMC, Oldsmobile, Pontiac and Saturn.
Hy-Ko 12005H65 Key Blank with Rubber Head Hy-Ko 12005H71 Key Blank with Rubber Head Hy-Ko 12005Y159 Key Blank
For use with the following vehicles:  Ford, Lincoln and Mercury. For use with the following vehicles:  Ford, Lincoln and Mercury. For use with the following vehicles:  Chrysler, Dodge, Eagle, Jeep and Plymouth.
Hy-Ko 12005Y157 Key Blank Hy-Ko 12005H67 Key Blank with Rubber Head Hy-Ko 12005H62 Key Blank with Rubber Head
For use with the following vehicles:  Chrysler, Dodge, Eagle, Jeep and Plymouth. For use with the following vehicles:  Ford, Lincoln and Mercury. For use with the following vehicles:  Ford, Lincoln and Mercury.
Hy-Ko 12005B80 Key Blank with Rubber Head Hy-Ko 12005Y155 Key Blank Hy-Ko 12005B88 Key Blank with Rubber Head
For use with the following vehicles:  Buick, Cadillac, Chevrolet, Geo, GMC, Oldsmobile, Pontiac and Saturn. For use with the following vehicles:  Chrysler, Dodge, Eagle, Jeep and Plymouth. For use with the following vehicles:  Buick, Cadillac, Chevrolet, Geo, GMC, Oldsmobile, Pontiac and Saturn.
Hy-Ko 12005H75 Key Blank with Rubber Head Hy-Ko 12005B91 Key Blank with Rubber Head Hy-Ko 12005Y153 Key Blank
For use with the following vehicles:  Ford, Lincoln and Mercury. For use with the following vehicles:  Buick, Cadillac, Chevrolet, Geo, GMC, Oldsmobile, Pontiac and Saturn. For use with the following vehicles:  Chrysler, Dodge, Eagle, Jeep and Plymouth.
Hy-Ko 12005B49 Key Blank with Rubber Head Hy-Ko 12005B102 Key Blank with Rubber Head Hy-Ko 12005B45 Key Blank
For use with the following vehicles:  Buick, Cadillac, Chevrolet, Geo, GMC, Oldsmobile, Pontiac and Saturn. For use with the following vehicles:  Buick, Cadillac, Chevrolet, Geo, GMC, Oldsmobile, Pontiac and Saturn. For use with the following vehicles:  Buick, Cadillac, Chevrolet, Geo, GMC, Oldsmobile, Pontiac and Saturn.
Hy-Ko 12005B48 Key Blank with Rubber Head Hy-Ko 12005B86 Key Blank with Rubber Head Hy-Ko 12005H78 Key Blank with Rubber Head
For use with the following vehicles:  Buick, Cadillac, Chevrolet, Geo, GMC, Oldsmobile, Pontiac and Saturn. For use with the following vehicles:  Buick, Cadillac, Chevrolet, Geo, GMC, Oldsmobile, Pontiac and Saturn. For use with the following vehicles:  Ford, Lincoln and Mercury.
Hy-Ko 12005B44 Key Blank Hy-Ko 12005H76 Key Blank with Rubber Head Hy-Ko 12005B77 Key Blank with Rubber Head
For use with the following vehicles:   Buick, Cadillac, Chevrolet, Geo, GMC, Oldsmobile, Pontiac and Saturn. For use with the following vehicles:  Ford, Lincoln and Mercury. For use with the following vehicles:  Buick, Cadillac, Chevrolet, Geo, GMC, Oldsmobile, Pontiac and Saturn.
Hy-Ko 12005B50 Key Blank with Rubber Head Hy-Ko 12005HD96 Key Blank with Rubber Head Hy-Ko 12005B89 Key Blank with Rubber Head
For use with the following vehicles:  Buick, Cadillac, Chevrolet, Geo, GMC, Oldsmobile, Pontiac and Saturn. Hy-Ko Key Blank, Automotive, Brass, Nickel Plated, With Rubber Head, For Honda Vehicle Locks For use with the following vehicles:   Buick, Cadillac, Chevrolet, Geo, GMC, Oldsmobile, Pontiac and Saturn.
Hy-Ko 12005B74 Key Blank with Rubber Head Hy-Ko 13005H75PB Key Blank with Blue Plastic Head Hy-Ko 12005HY12 Key Blank with Plastic Head
For use with the following vehicles:   Buick, Cadillac, Chevrolet, Geo, GMC, Oldsmobile, Pontiac and Saturn. For use with the following vehicles:  Ford, Lincoln and Mercury. Hy-Ko Key Blank, Automobile, 3 in Length, 1.1 in Width, Brass, Nickel Plated, With Plastic Head, For Hyundai Vehicle Locks
Hy-Ko 12005DA38 Key Blank with Rubber Head Hy-Ko 12005BMW3 Key Blank with Rubber Head Hy-Ko 12005B92 Key Blank with Rubber Head
Hy-Ko Key Blank, Automotive, 3.105 in Length, 1.176 in Width, Brass, Nickel Plated, With Rubber Head, For Nissan/Datsun Vehicle Locks Hy-Ko Key Blank, Automobile, Brass, Nickel Plated, With Rubber Head, For BMW Vehicle Locks For use with the following vehicles: Buick, Cadillac, Chevrolet, Geo, GMC, Oldsmobile, Pontiac and Saturn.
Hy-Ko 12005HY14 Key Blank with Plastic Head Hy-Ko 12005MZ27 Key Blank with Rubber Head Hy-Ko 13005TR47PB Key Blank with Plastic Head
Hy-Ko Key Blank, Automobile, 3 in Length, 1.1 in Width, Brass, Nickel Plated, With Plastic Head, For Hyundai Vehicle Locks Hy-Ko Key Blank, Automobile, 3.2 in Length, 1 in Width, Brass, Nickel Plated, With Rubber Head, For Mazda Vehicle Locks Hy-Ko Key Blank, Automobile, Brass, Nickel Plated, with Plastic Head, For Toyota Vehicle Locks
Hy-Ko 12005MZ13 Key Blank with Rubber Head Hy-Ko 12005TR33 Key Blank with Plastic Head Hy-Ko 12005MZ19 Key Blank with Rubber Head
Hy-Ko Key Blank, Automobile, Brass, Nickel Plated, With Rubber Head, For Mazda Vehicle Locks Hy-Ko Key Blank, Automobile, 2-1/2 in Length, 1.2 in Width, Brass, Nickel Plated, With Plastic Head, For Toyota Vehicle Locks Hy-Ko Key Blank, Automobile, 3 in Length, 1 in Width, Brass, Nickel Plated, With Rubber Head, For Mazda Vehicle Locks
Hy-Ko 12005DA25 Key Blank with Rubber Head Hy-Ko 12005MIT4 Key Blank Hy-Ko 12005TR40 Key Blank with Plastic Head
Hy-Ko Key Blank, Automotive, 2.233 in Length, 1.025 in Width, Brass, Nickel Plated, With Rubber Head, For Nissan Vehicle Locks Hy-Ko Key Blank, Automotive, Brass, Nickel Plated, For Mitsubishi Vehicle Locks Hy-Ko Key Blank, Automobile, 2-1/2 in Length, 1.2 in Width, Brass, Nickel Plated, With Plastic Head, For Toyota Vehicle Locks
Hy-Ko 12005HD91 Key Blank with Rubber Head Hy-Ko 12005DA34 Key Blank with Rubber Head Hy-Ko 12005MIT1 Key Blank
Hy-Ko Key Blank, Automotive, Brass, Nickel Plated, With Rubber Head, For Honda Vehicle Locks Hy-Ko Key Blank, Automotive, 3.157 in Length, 1.098 in Width, Brass, Nickel Plated, With Rubber Head, For Nissan/Datsun Vehicle Locks Hy-Ko Key Blank, Automotive, Brass, Nickel Plated, For Mitsubishi Vehicle Locks
Hy-Ko 12005HD103 Key Blank with Rubber Head Hy-Ko 12005DA31 Key Blank with Rubber Head Hy-Ko 12005SUZ17 Key Blank
Hy-Ko Key Blank, Automobile, Brass, Nickel Plated, With Rubber Head, For Honda Vehicle Locks Hy-Ko Key Blank, Automotive, 3.105 in Length, 1.176 in Width, Brass, Nickel Plated, With Rubber Head, For Nissan/Datsun Vehicle Locks Hy-Ko Key Blank, Automobile, 2.7 in Length, 1.2 in Width, Brass, Nickel Plated, For Suzuki Vehicle Locks
Hy-Ko 12005VW37 Key Blank with Plastic Head ROLLER STND ZINC PLATED       KEYBLANK GM AO B72P
KEYBLANK GM AO B72P
Our Price: $11.91
Hy-Ko Key Blank, Automobile, Brass, Nickel Plated, With Plastic Head, For Volkswagen Vehicle Locks 1-3/4" Nylon roller, 4-1/2" stem, 7/16" steel shaft. Visual-pack.
KEYBLANK TOYOTA AUTO TR46P    KEYBLANK HYUNDAI AO HY13P     KEYBLANK HYUNDAI AO HY6P
KEYBLANK HYUNDAI AO HY13P
Our Price: $11.91
KEYBLANK HYUNDAI AO HY6P
Our Price: $11.91
KEYBLANK KIA AO KK2P          KEYBLANK TOYOTA RBRHD TR44P   KEYBLANK NISSAN RBRHD DA37P
KEYBLANK KIA AO KK2P
Our Price: $11.91
KEYBLANK KIA RBRHD KK3P       KEYBLANK GM RBRHD B84P        KEYBLANK AUDI RBRHD V35P
KEYBLANK KIA RBRHD KK3P
Our Price: $11.91
KEYBLANK GM RBRHD B84P
Our Price: $11.91
KEYBLANK AUDI RBRHD V35P
Our Price: $11.91
Prime Line GD 52138 Door Slide Lock CABLE SPG EXT LFT GLV 12FTX1/8 SHAFT LOCK CHRM 5/16IN SQX4IN
Designed for use with No.GD-52147 outside lock and latch assembly. Galvanized steel, spring-loaded lock with latch bolt release lever. National Hardware Extension Spring Lift Cable, Series: N280, 1/8 in Cable Diameter, 12 ft Cable Length, Steel Cable, Galvanized Body Finish/Color, Standards: BHMA A138.18, For 7 ft Single or Double Wood or Metal Doors National Hardware Garage Door Handle, Series: V7640, 5.81 in Length, 1.33 in Width, Die-Cast Handle, Steel Shaft, Chrome Plated, 5/16 in Dia x 4 in Length Shaft, For Wood or Metal Garage Doors, Camper Tops and RVs
L-HNDL LOCK UNIV CHM          Prime Line GD 52118 Inside Deadlock Prime Line GD 52102 Aircraft Safety Cable Set with Cable Clamps
National Hardware Locking L-Handle, Series: V7641, Universal, Suitable For Use With: Model 7645 Swivel Lock/7654 Snap Lock, Die-Cast Handle, Steel Shaft, Chrome, 5/16 sq-in x 3-11/16 in Shaft, For Wood or Metal Garage Doors, Camper Tops, RVs Works only from inside for extra protection as a night or vacation security lock. Fits most garage doors. Engages slot in vertical track. 7/8"W x 1/8" thick steel slide bolt with heavy-duty galvanized steel housing. Includes lock assembly and four 1/4"-20 x 1-7/8" pancake-head carriage bolts with nuts. Galvanized carbon steel aircraft cable installs through extension springs to prevent injury in case of breakage. Required on California installations. Use 4 cables for dual spring doors.
T-HNDL BLANK 5/16 SQX3IN CHRM National Hardware DP51MBC Single Box Rail Bracket LOCKS ALUMINUM
280-602 BLANK T-HANDLE
Our Price: $12.88
BOX RAIL BRACKETS GALV
Our Price: $13.40
LOCKS ALUMINUM
Our Price: $13.44
National Hardware Blank T-Handle, Series: V7639, Die-Cast Handle, Steel Shaft, Chrome Plated, Includes: (1) 1/8 in Dia x 5/8 in Length Knurled Pin, (2) 2 Push Retainer For 0.309 sq Shaft, (3) Flat Washer 7/16 in ID and (4) NO 7 x 1 Oval Head Slotted Screws, 5/16 in Dia x 3 in Length Shaft Designed for mounting #5114 or #5116 box rail. Includes 2 lag bolts, carriage bolt and nut. BHMA A138.18. Suitable for use on corrugated metal siding due to narrow mounting surface on sliding door systems. Adjustable to bring rail closer or further away from building. 300 lb safe working load. 7.12"L x 3.25"W x 2"D. Can be used with flashing with the 5151 flashing bracket. National Hardware Dead Bolt Lock, Series: V7651, 2 Keys, Steel, Aluminum, Includes: (2) Keys, (4) NO 8 x 5/8 Pan Head Phillips Wood Screws, For Wood or Metal Garage Doors
Prime Line M6158 Shower Door Handleset Prime Line GD 52238 Hard Drawn Wire Winding Rod SHAFT LOCK CHRM 5/16SQX3-3/4IN
Plated diecast handles; outside handle with threaded studs and inside handle with holes; supplied with stainless steel machine screws. Contents: 1 handle set with installation screws. Hard-drawn wire rods, the only tool used to wind and unwind tension on torsion springs. National Hardware Locking T-Handle, Series: V7643, Suitable For Use With: Model 7645 Swivel Lock/7654 Snap Lock, 2 Keys, Die Cast Handle, Steel Shaft, Chrome, Includes: (2) NO 10 x 3/4 Phillips Pan Head Machine Screws and (1) Retainer Washer, 5/16 sq-in x 3-3/4 in Shaft, For Metal or Fiberglass Doors
KW1-15 KEYBLANK CAMO STARS    KW1-16 KEYBLANK SMILEY        KW1-17 KEYBLANK SUNFLOWER
KW1-16 KEYBLANK SMILEY
Our Price: $15.40
KW1-17 KEYBLANK SUNFLOWER
Our Price: $15.40
KW1-20 KEYBLANK LADYBUG       KW1-23 KEYBLANK FLIP FLOPS    KW1-31 KEYBLANK EAGLE BALD
KW1-20 KEYBLANK LADYBUG
Our Price: $15.40
KW1-32 KEYBLANK PEACE SIGNS   KW1-35 KEYBLANK HIGH HEEL     KW1-36 KEYBLANK FLEUR DE LIS
KW1-35 KEYBLANK HIGH HEEL
Our Price: $15.40
KW1-37 KEYBLANK CAT-FACE BLK  KW1-41 KEYBLANK SWIRL BLK/WHT SC1-15 KEYBLANK CAMO STARS
SC1-16 KEYBLANK SMILEY        SC1-17 KEYBLANK SUNFLOWER     SC1-20 KEYBLANK LADYBUG
SC1-16 KEYBLANK SMILEY
Our Price: $15.40
SC1-17 KEYBLANK SUNFLOWER
Our Price: $15.40
SC1-20 KEYBLANK LADYBUG
Our Price: $15.40
SC1-23 KEYBLANK FLIP FLOPS    SC1-31 KEYBLANK EAGLE BALD    SC1-32 KEYBLANK SIGNS PEACE
SC1-35 KEYBLANK HIGH HEEL     SC1-36 KEYBLANK FLEUR DE LIS  SC1-37 KEYBLANK CAT-FACE BLK
SC1-35 KEYBLANK HIGH HEEL
Our Price: $15.40
SC1-41 KEYBLANK SWIRL BLK/WHT KEYBLANK SUBARU RBRHD SUB1P   Prime Line GD 52122 Door T Handle Lock
5/16" square shaft, 3"L, replaces most garage door, camper and RV locking handles. Zinc die-cast construction. 1-1/2" hole centers. Includes locking handle and 2 chrome plated solid brass keys.
Prime-Line M 6111 Sliding Shower Door Bottom Guide Prime Line GD52169 Door T Handle Lock Prime Line GD 52121 Door T Handle
Clear acrylic bottom guide for sliding tub enclosure doors. Fits on 1/2" thick panels. Used by Sterling and others. Zinc diecast construction; keyed lock; 5/16" square shaft, 4-5/8" long, 1-1/2" hole centers; replaces many garage door, camper and R.V. locking handles. Screws attach to lock from the inside of door. Contents: 1 locking handle; 2 keys. Used when locking cylinder is mounted separately. 1-1/2" hole centers. Includes 1 die-cast outside handle with 5/16" square x 3"L shaft, and 1 die-cast zinc inside handle with set screw.
Stanley 51EDBC Box Rail End Cap HANDLE OTSD LOCK              National Hardware DP51MSB Single Box Rail Splice Bracket
BOX RAIL BRACKETS GALV
Our Price: $17.91
Designed to press into rail to keep rail free of foreign materials from birds or weather . Can be used as center stop using 3/8" x 2" carriage bolts (not furnished). Often packed with box hangers. National Hardware Outside Locking Handle, Series: V7642, 7-1/2 in Overall Length, Die-Cast Handle, Steel Shaft, Chrome, 5/16 in Dia x 3-1/4 in Length Shaft Designed for mounting #5114 or #5116 box rail. Includes 2 lag bolts, carriage bolt and nut. BHMA A138.18. Suitable for use on corrugated metal siding due to narrow mounting surface on sliding door systems. Adjustable to bring rail closer or further away from building. 300 lb safe working load. 7.12"L x 3.25"W x 2"D. Can be used with flashing with the 5151 flashing bracket. One splice bracket should be installed on every length of rail to lock it in place.
Prime Line GD 52119 Deadbolt EXTENSION BLACK 110LBX25IN    Prime Line GD 52123 Door Handle Lock
EXTENSION 25X110# BLK
Our Price: $19.42
Used by many manufacturers; will replace most locking mechanisms of this type. Painted die-cast inside lock with heavy-duty steel spring bolt. Key cylinder has aluminum face and 5-pin tumbler lock with cylinder ring. National Hardware Extension Spring, Series: 7688, 25 in Nominal, 110 lb Load Capacity, Steel, Black, For 7 ft High Garage Doors 5/16" square shaft, 2-7/8"L, replaces most garage door, camper and RV locking handles. Zinc die-cast construction. 1-3/4" hole centers. Includes locking handle and 2 chrome plated solid brass keys.
EXTENSION BLACK 120LBX25IN    Prime Line GD 12202 Extension Spring 25 in L EXTENSION BLACK 130LBX25IN
EXTENSION 25X120# BLK
Our Price: $20.28
EXTENSION 25X130# BLK
Our Price: $20.78
Color: Black. Boxed. For use on sectional, overhead, single car fiberglass doors. Use two 70lb springs for each 70lb door (1 on each side). Rated at 10,000 cycles. Includes safety cable, which protects against personal injury and property damage from broken springs. Color-coded and shrink-wrapped for selection ease. Polybagged. National Hardware Extension Spring, Series: 7690, 25 in Nominal, 130 lb Load Capacity, Steel, Black, For 7 ft High Garage Doors
Prime-Line M 6230 Half Round Shower Door Bottom Seal EXTENSION BLACK 140LBX25IN    Prime Line GD52142 Carded Electric Key Lock Switch
EXTENSION 25X140# BLK
Our Price: $22.16
Prime-Line Shower Door Bottom Seal, Half Round, 36 in Length, 13/16 in Height, Vinyl, Gray National Hardware Extension Spring, Series: 7690, 25 in Nominal, 140 lb Load Capacity, Steel, Black, For 7 ft High Garage Doors Allows operation of garage door opener without a transmitter; mount to the exterior door jamb and hard wire to opener. Contents: 1 key cylinder with plastic housing and face plate assembly; 2 keys.
EXTENSION BLACK 150LBX25IN    EXTENSION BLACK 150LBX25IN    Prime Line GD 12191 Extension Spring 25 in L
EXTENSION 25X150# BLK
Our Price: $22.47
EXTENSION 22X150# BLK
Our Price: $22.47
National Hardware Extension Spring, Series: 7690, 25 in Nominal, 150 lb Load Capacity, Steel, Black, For 7 ft High Garage Doors National Hardware Extension Spring, Series: 7691, 22 in Nominal, 150 lb Load Capacity, Steel, Black, For 7 ft High Garage Doors For use on sectional, overhead, wood doors 8'W x up to 6'6"H, 2 panel/4 section; or fiberglass doors 16'W x up to 7'H, 4 section. Use two 110lb springs for each 110lb door (1 on each side). Rated at 10,000 cycles. Includes safety cable, which protects against personal injury and property damage from broken springs. Color-coded and shrink-wrapped for selection ease. Polybagged.
Prime Line GD 12192 Extension Spring 25 in L Prime Line GD 12193 Extension Spring 25 in L Prime Line GD 12194 Extension Spring 25 in L
For use on sectional, overhead, wood doors 8'W x up to 7'H, 2 panel/4 section; or fiberglass doors 16'W x up to 7'H, 4 section. Use two 120lb springs for each 120lb door (1 on each side). Rated at 10,000 cycles. Includes safety cable, which protects against personal injury and property damage from broken springs. Color-coded and shrink-wrapped for selection ease. Polybagged. For use on sectional, overhead, wood doors 8'W x up to 7'H, 4 panel/4 section. Use two 130lb springs for each 130lb door (1 on each side). Rated at 10,000 cycles. Includes safety cable, which protects against personal injury and property damage from broken springs. Color-coded and shrink-wrapped for selection ease. Polybagged. For use on sectional, overhead, wood doors 9'W x up to 7'H, 2 panel/4 section; or wood doors 16'W x up to 7'H, 2 panel/4 section. Use two 140lb springs for each 9'W 140lb door (1 each side); use 4 springs for each 16'W 140lb door (2 on each side). Rated at 10,000 cycles. Includes safety cable, which protects against personal injury and property damage from broken springs. Color-coded and shrink-wrapped for selection ease. Polybagged.
EXTENSION BLACK 160LBX25IN    Stanley 5414BC Double Round Rail Bracket Stanley 105676 Rail Track
EXTENSION 25X160# BLK
Our Price: $24.64
National Hardware Extension Spring, Series: 7690, 25 in Nominal, 160 lb Load Capacity, Steel, Black, For 7 ft High Garage Doors Designed to be used with #5400 round rail to mount double runs of rail for by-passing doors to side of building installation. Includes lag bolt, two carriage bolts and two nuts. (1) Bracket should be installed every 2 feet of rail. Suitable for use on corrugated metal siding due to narrow mounting surface. Designed for use on doors weighing up to 450 pounds. Rail drilled 24" OC for brackets. Can be used with many types of single and multiple brackets. Screws included. Meets ANSI/BHMA A 156.14, Grade 1. Rail is formed to give an even tread to hanger wheels.
Prime Line GD 12195 Extension Spring 25 in L Hy-Ko 15005SC1-SM2 Key Blank Hy-Ko 15005KW1-SM2 2-Sided Novelty Key Blank
For use on sectional, overhead, wood doors 9'W x 7'H, 4 panel/4 section; or wood doors 16'W x 7'H, 4 panel/4 section. Use two 150lb springs for each 9'W 150lb door (1 each side); use 4 springs for each 16'W 150lb door (2 on each side). Rated at 10,000 cycles. Includes safety cable, which protects against personal injury and property damage from broken springs. Color-coded and shrink-wrapped for selection ease. Polybagged. Keys have a colored pattern displayed over the entire key.  Made to fit Schlage SC1 keyway and also Baldwin. Keys have a colored pattern displayed over the entire key.  Made to fit Kwikset KW1 and Titan KW10 keyways.
Hy-Ko 15005KW1-SG1 Novelty Key Blank Hy-Ko 15005KW1-SKLP Novelty Key Blank Hy-Ko 15005SC1-TW5 2-Sided Key Blank
Keys have a colored pattern displayed over the entire key.  Made to fit Kwikset KW1 and Titan KW10 keyways. Keys have a colored pattern displayed over the entire key.  Made to fit Kwikset KW1 and Titan KW10 keyways. Keys have a colored pattern displayed over the entire key.  Made to fit Schlage SC1 keyway and also Baldwin.
Hy-Ko 15005KW1-BTM1 Novelty Key Blank Hy-Ko 16005KW1-RKBL Novelty Key Blank Hy-Ko 16005SC1-HTS US Flag Pattern Key Blank
Keys have a colored pattern displayed over the entire key.  Made to fit Kwikset KW1 and Titan KW10 keyways. Keys have a colored pattern displayed over the entire key.  Made to fit Kwikset KW1 and Titan KW10 keyways. Keys have a colored pattern displayed over the entire key.  Made to fit Schlage SC1 keyway and also Baldwin.
Hy-Ko 15005SC1-BTM1 2-Sided Key Blank Hy-Ko 15005KW1-SB2 2-Sided Novelty Key Blank Hy-Ko 15005KW1-LUCK Novelty Key Blank
Keys have a colored pattern displayed over the entire key.  Made to fit Schlage SC1 keyway and also Baldwin. Keys have a colored pattern displayed over the entire key.  Made to fit Kwikset KW1 and Titan KW10 keyways. Keys have a colored pattern displayed over the entire key.  Made to fit Kwikset KW1 and Titan KW10 keyways.
Hy-Ko 15005SC1-TW3 2-Sided Key Blank Hy-Ko 15005KW1-TWBL Novelty Key Blank Hy-Ko 16005KW1-HTS Novelty Key Blank
Keys have a colored pattern displayed over the entire key.  Made to fit Schlage SC1 keyway and also Baldwin. Keys have a colored pattern displayed over the entire key.  Made to fit Kwikset KW1 and Titan KW10 keyways. Keys have a colored pattern displayed over the entire key.  Made to fit Kwikset KW1 and Titan KW10 keyways.
Hy-Ko 15005SC1-SD2 2-Sided Key Blank Hy-Ko 15005KW1-CEL Novelty Key Blank Hy-Ko 15005KW1-SD2 2-Sided Novelty Key Blank
Keys have a colored pattern displayed over the entire key.  Made to fit Schlage SC1 keyway and also Baldwin. Keys have a colored pattern displayed over the entire key.  Made to fit Kwikset KW1 and Titan KW10 keyways. Keys have a colored pattern displayed over the entire key.  Made to fit Kwikset KW1 and Titan KW10 keyways.
KW1 KEYBLANK ANGEL BLING      SC1 KEYBLANK #1 MOM           SC1 KEYBLANK ANGEL BLING
KW1 KEYBLANK ANGEL BLING
Our Price: $30.55
SC1 KEYBLANK #1 MOM
Our Price: $30.55
SC1 KEYBLANK ANGEL BLING
Our Price: $30.55
SC1 KEYBLANK BUTTRFLY BLING   SC1 KEYBLANK TOOLS            SC1 KEYBLANK TWEETY BLING
SC1 KEYBLANK TOOLS
Our Price: $30.55
SC1 KEYBLANK TWEETY BLING
Our Price: $30.55
KW1 KEYBLANK #1 MOM           SC1 KEYBLANK CELESTIAL        SC1 KYBLK CUPCAKE BLING
KW1 KEYBLANK #1 MOM
Our Price: $30.55
SC1 KEYBLANK CELESTIAL
Our Price: $30.55
SC1 KYBLK CUPCAKE BLING
Our Price: $30.55
SC1 KEYBLANK #1 DAD           SC1 KEYBLANK DEER W/CAMOUFLG  SC1 KEYBLANK FIREMAN SYMBOL
SC1 KEYBLANK #1 DAD
Our Price: $30.55
SC1 KEYBLANK POLICE BADGE