Home > HARDWARE > WINDOW & DOOR HARDWARE > SHOWER DOOR
Choose a sub category:
KEY BLANKS - CYLINDER SHOWER DOOR REPAIR PARTS KEY BLANKS - AUTOMOTIVE
KEY BLANKS - MOTORCYCLE & EQUI KEY FOBS KEY FOBS - SMART / BLUETOOTH
KEY STORAGE KEY CHAINS/RINGS/REELS KEY MACHINE PARTS
Sort By:
1
Prime Line M 6000 Round Edge Flat Tub Enclosure Roller Prime Line M6001 Round Edge Flat Tub Enclosure Roller Prime Line M 6022 Flat Shower Door Bottom Seal
1/4"W oval-edge nylon ball bearing wheel with 7/16" threaded hex hub. Includes truss head screw. Nylon ball bearing roller with threaded hex hub. Contents: 2 rollers with #8-32x3/8 Phillips binder head machine screws. For use on hinged shower doors.
Prime Line M-6014 Swinging Shower Door Catch Danco 64654B Oval Edge Bagged Door Roller Stanley 193839 Round Rail Track End Cap
1-5/16"W spring-loaded latch assembly for hinged shower doors. 9/16"W x 3/4"L x 1/2"H stainless steel housing with nylon tip. Includes two No.8 x 3/8" Phillips pan head sheet metal screws. Ball bearing construction, nylon wheel with 8-32 threaded center hole and 7-16" hub diameter that extends from back 1/8". With  bolt, nut and washer. Pack loose.
Prime Line M 6023 Star Shower Door Bottom Seal Prime Line M 6002 Round Edge Flat Tub Enclosure Roller Prime Line M 6003 Round Edge Flat Tub Enclosure Roller
"Star Tip" shaped; for use on hinged shower doors. 1/4"W oval-edge nylon ball bearing wheel with 7/16" threaded hex hub. Includes truss head screw. 1/4"W flat-edge nylon ball bearing wheel with 3/8" threaded hex hub. Includes truss head screw.
Prime Line M-6040 Tee Shape Tip Shower Door Sweep Kwikset 3437 3CP Rectangular Latch Strike Plate Prime Line M 6058 Door Guide
5/32" wide x 3/4" tall for use on hinged shower doors. Standard on non-U.L. locksets. Full lip square corner. 2-1/4"H, 1-5/8"CTC. Used by several shower door manufacturers for sliding tub-enclosure doors. 1"L x 1-9/16"W x 5/8"H overall. Fits 7/16" thick door rails.
Prime-Line M 6211 Shower Door Bottom Seal Prime Line M6067 Door Guide Danco 64652B Oval Edge Bagged Door Roller
T-shaped tip, fits into extrusion slot on bottom of swinging shower door to prevent water from leaking onto floor. Injection molded plastic bottom guide fits 7/16" thick door panels. Installed with double sided tape included.  Includes 1 guide. Ball bearing construction, nylon wheel with 8-32 threaded center hole and 7-16" hub diameter that extends from back 1/8".
Titan 18-32223CP Deadbolt T Strike SEAL SHOWER DR RUBBER 5/8X38IN SEAL SHOWER DR RUBBER 3/8X48IN
For the Maximum Security deadbolts. Standard on Nos.780 and 785. 1-3/4" inner CTC, 3" outer CTC. 3-5/8"H x 1-1/4"W. 3-hour fire rating with U.L. Titan and 1-1/2 hour fire rating with U.L. Kwikset locks and latch bolts.
Prime-Line M 6144 Shower Door Bottom Guide Stanley 51L2 Double Triangle Bracket Prime Line M 6090 Bottom Mount Door Guide
Bottom guide used to keep glass door panels separated. Snaps into place on base of enclosure., Clear vinyl material. Designed to support double run of #5114 or #5116 box rail. Suitable for use on corrugated metal siding due to narrow surface. Does not come with rail bracket or fasteners. Can be used as double stop when used with #6008 door stop. 300 lb. safe working load. Nylon bottom guide for sliding tub enclosure doors; fits 1/2" thick door rails; snap-in tabs hold guide to track. Fits On:  International. Contents: 2 guides.
Stanley 100834 Door Bumper Prime Line M 6054 Shower Door Roller Assembly Stanley 104331 Single Side Bracket
BOX RAIL BRACKETS GALV
Our Price: $9.39
Designed for use as a door stop on up to 2" thick sliding doors. Embossed steel for added strength. Display packed. Extruded aluminum bracket; 3/4" diameter flat edge, nylon ball bearing roller; thru-glass 1/4" binder post; used on frameless shower doors.Contents: 2 roller assemblies; 2 sets of installation screws. Designed as a support bracket for Stanley's 105270, 105676, 105213, and 105726 box rail at 24" OC intervals. Includes lags. Display packed.
Stanley 100875 Adjustable Reversible Stay Roller Prime Line M 6145 Shower Door Roller Assembly Prime Line M 6191 Bottom Mount Door Hook Guide
Without screws. Each loose. Extruded aluminum bracket; 3/4" diameter oval edge, nylon ball bearing roller; used on frameless shower doors. Contents: 2 roller assemblies. Bottom guide for sliding shower enclosure doors.
Stanley DP5421BC Single Round Rail Splice Bracket BRACKET BOX RAIL ZINC         Stanley 104380 Splice Bracket
BOX RAIL BRACKETS ZINC
Our Price: $10.00
Designed to be used with #5400 round rail to join and hold two lengths of rail together. Includes lag bolt and spice screws. Splice screws are inserted in holes at the end of round rail. Safe working load 300 lbs. Designed to join #5114 or #5116 box rail. Brackets can be installed on a 2 x 6 header board. Offset nail holes for quick placement. Compatible with 5438 & 5439 snap-on flashing brackets. Includes lag bolt and spice screws. Splice screws are inserted in holes at the end of rail. One splice bracket should be installed on every length of rail to lock it in place. Pack loose. Designed to join two pieces of Stanley's 105270, 105676, 105213, and 105726 box rail. Meets ANSI/BHMA A 156.14. Includes lags.
Stanley 131490 Adjustable Reversible Stay Roller National Hardware DP51MBC Single Box Rail Bracket Prime Line M6158 Shower Door Handleset
BOX RAIL BRACKETS GALV
Our Price: $12.73
Designed for use as a heavy-duty guide on large, sliding doors up to 3-3/4" thick. Slots in frame provide adjustment for holding doors against wood walls or posts. Delrin wheel is reversible; it can be used either side of frame. Offers sturdy steel frame construction. Meets ANSI/BHMA A 156.14. Roller is adjustable. Includes nail and lag screw holes. Hardened steel bolt for greater strength. Display packed Designed for mounting #5114 or #5116 box rail. Includes 2 lag bolts, carriage bolt and nut. BHMA A138.18. Suitable for use on corrugated metal siding due to narrow mounting surface on sliding door systems. Adjustable to bring rail closer or further away from building. 300 lb safe working load. 7.12"L x 3.25"W x 2"D. Can be used with flashing with the 5151 flashing bracket. Plated diecast handles; outside handle with threaded studs and inside handle with holes; supplied with stainless steel machine screws. Contents: 1 handle set with installation screws.
Stanley 162297 Single Adjustable Door Stop TRUCK-BOX RAIL ZN             Stanley 131706 Single Adjustable Door Guide
Designed to engage the bottom of a single TAB-LOC door in either the open or closed position to hold firm against the building. For bi-parting doors stop engages in the open position only, also used on wood frame doors using #6061 or #6062 continuous bottom guides. Slotted holes in each leg allow both lateral and vertical adjustments. Bolt, nut, and washer are included for easy attachment. Boxed. Packed With Wheel Trucks Only. Durable one piece, precision formed steel. Comes with self-lubricating Deirin Bearings. Suitable for use with No 59, 5100, 5103, 5104, 5105, 5110, 5114 or 5116 box rail. 225 lb/hanger safe working load, 2.14" diameter. 4.15"L x 3"W x 1.61"D. Standards: BHMA A138.18 specified. Extra-wide guides are designed for corrugated metal-clad doors, can be used as a door stop when mounted sideways. Curved section of guide may be turned sideways allowing straight access when installing screws. Fasteners are not included. Guides have holes for spikes as well as larger holes for 3/8" lag screw mounting. Guide is adjustable for doors up to 5-1/2" thick.
Prime-Line M 6230 Half Round Shower Door Bottom Seal Prime-Line M 6111 Sliding Shower Door Bottom Guide Stanley 51EDBC Box Rail End Cap
Prime-Line Shower Door Bottom Seal, Half Round, 36 in Length, 13/16 in Height, Vinyl, Gray Clear acrylic bottom guide for sliding tub enclosure doors. Fits on 1/2" thick panels. Used by Sterling and others. Designed to press into rail to keep rail free of foreign materials from birds or weather . Can be used as center stop using 3/8" x 2" carriage bolts (not furnished). Often packed with box hangers.
National Hardware DP51MSB Single Box Rail Splice Bracket Stanley 160481 Guide Rail Stanley 5414BC Double Round Rail Bracket
BOX RAIL BRACKETS GALV
Our Price: $17.01
Designed for mounting #5114 or #5116 box rail. Includes 2 lag bolts, carriage bolt and nut. BHMA A138.18. Suitable for use on corrugated metal siding due to narrow mounting surface on sliding door systems. Adjustable to bring rail closer or further away from building. 300 lb safe working load. 7.12"L x 3.25"W x 2"D. Can be used with flashing with the 5151 flashing bracket. One splice bracket should be installed on every length of rail to lock it in place. Designed to engage the bottom lateral of TAB-LOC doors to hold door firmly in place and prevent wind damage to both the door and building. Fastens to building using #6005 Guide Rail Brackets. Also used with #6061 or #6062 continuous bottom guides. Includes pre-punched mounting holes to attach #6005 guide rail brackets. Pack loose. Designed to be used with #5400 round rail to mount double runs of rail for by-passing doors to side of building installation. Includes lag bolt, two carriage bolts and two nuts. (1) Bracket should be installed every 2 feet of rail. Suitable for use on corrugated metal siding due to narrow mounting surface.
Stanley 160499 Guide Rail Stanley 105676 Rail Track Porter-Cable 59375 Strike and Latch Template
Designed to engage the bottom lateral of TAB-LOC doors to hold door firmly in place and prevent wind damage to both the door and building. Fastens to building using #6005 Guide Rail Brackets. Also used with #6061 or #6062 continuous bottom guides. Includes pre-punched mounting holes to attach #6005 guide rail brackets. Pack loose. Designed for use on doors weighing up to 450 pounds. Rail drilled 24" OC for brackets. Can be used with many types of single and multiple brackets. Screws included. Meets ANSI/BHMA A 156.14, Grade 1. Rail is formed to give an even tread to hanger wheels. Fast routing of strike and latch plates. Includes high-speed steel router bit No.43670. Will route the following sizes: Strike plates; 1-1/8" x 2-3/4", 1-1/2" x 2-1/4" and 1-1/2" x 2-3/4". Latch plate: 1" x 2-1/4", 1-1/8" x 2-1/4" and 1-1/8" x 2-3/4".
Stanley 160507 Guide Rail National Hardware 5001 Box Rail Hanger Stanley 173708 Guide Rail Bracket
Designed to engage the bottom lateral of TAB-LOC doors to hold door firmly in place and prevent wind damage to both the door and building. Fastens to building using #6005 Guide Rail Brackets. Also used with #6061 or #6062 continuous bottom guides. Includes pre-punched mounting holes to attach #6005 guide rail brackets. Pack loose. Designed for use with box rail. For use with #59, #5100, #5103, #5104, #5105, #5110, #5114 or #5116 box rail. Includes truck, connecting bolt and nuts. Packed without end caps. Made of durable one-piece, precision-formed steel. Comes with self-lubricating Delrin bearings. Safe working load - 225 lb. per hanger. 2.14" roller diameter. 4-1/2" bolt length, 4.49" overall length, 1.61" overall height. BHMA A138.18. Designed to attach #6004 guide rail. Slotted hole in each leg allows for both lateral and vertical adjustments. Bolts, nuts and washers are included for easy attachment.
Stanley 105726 Rail Track Trackmaster 5400 Plain Round Barn Door Rail Stanley 174268 Rail Hanger
Designed for use on doors weighing up to 450 pounds. Rail drilled 24" OC for brackets. Can be used with many types of single and multiple brackets. Screws included. Meets ANSI/BHMA A 156.14, Grade 1. Rail is formed to give an even tread to hanger wheels. Designed for doors weighing up to 600 lb. per panel. Can be used with various types of single and multiple brackets. Advanced rail design with flat top and sides for easier mounting and better stability. Self cleaning and smoother operation. Interchangeable with other brands of round rail. Manufactured from galvanized steel. Designed for use on wood-frame, metal-clad doors using a 2"x4" or 2"x6" frame with Stanley's 105270, 105676, 105213, and 105726 box rail. Includes two washers, four hex nuts, and two end caps per pair. Made of durable one-piece, precision-formed steel. Offers self-lubricating Delrin bearings. The 1/2" offset bolt adjusts both vertically and laterally from inside door. Connecting bolt threaded 7" adjusted laterally 1" by turning offset bolt for desired clearance. Can hold 450 lbs. per pair. 9" bolt. Boxed.
Stanley 261602 Flashing Bracket Stanley 184390 Astragal Rail Stanley 193847 Round Rail Splice Collar
With slots for 5120 flashings. Boxed loose. Designed to cover the gap between bi-parting doors. Design allows it to wrap around the flashing channel of the vertical. Fits both TAB-LOC and EASY-FRAME door verticals and attaches with pop rivets. Can be installed before or after doors are hung. Boxed. Designed for use with #5430, #5433, #5460 and #5465 round rail. Unique collar design supports the end of two rails while not interfering with flat mounting surface of rail. Fasteners are not required. Can be installed after rail is mounted to building. Rail bracket spacing holds collar in place.
Stanley 131565 Adjustable Door Guide Stanley 112102 Trolley Rail Hanger Stanley 51HBC Double Box Rail Bracket
Designed for single sliding or bi-parting metal or wood doors. Intended to take abuse from trucks, tractors and farm machinery when used around factory and farm buildings. Smooth ramp on each side of the guide prevents cutting tractor or truck tires. Mounts on concrete floors with lag screws and shields or on a 6" x 6" post. 1/2" rod or bolt inserted through hole in each side will serve as a center stop for bi-parting doors. Meets ANSI/BHMA, A 156.14. Manufactured from hot-rolled steel. Boxed. Rigid with single door strap. Designed for use on wood-frame sliding doors from 1-1/2" to 2" thick. Slot in top of door strap allows lateral and vertical adjustment. 450 pound capacity per pair. Packed with two end caps and bolts for attaching door strap. Made of durable one-piece, precision-formed steel and has self-lubricating Delrin bearings. Boxed. Designed to support a double run of #5114 or #5116 box rail. 1 Bracket should be installed every 2 feet of rail. Includes lag bolt. 300lb. safe working load.
Stanley 105213 Rail Track Trackmaster 5400 Plain Round Barn Door Rail Stanley 145581 Flexible Door Hanger
Designed for use on doors weighing up to 450 pounds. Rail drilled 24" OC for brackets. Can be used with many types of single and multiple brackets. Screws included. Meets ANSI/BHMA A 156.14, Grade 1. Rail is formed to give an even tread to hanger wheels. Designed for doors weighing up to 600 lb. per panel. Can be used with various types of single and multiple brackets. Advanced rail design with flat top and sides for easier mounting and better stability. Self cleaning and smoother operation. Interchangeable with other brands of round rail. Manufactured from galvanized steel. Designed for use with box rail on wood-frame or metal clad doors using a 2"x4" or 2"x6" frame. For use with #5100 or #5103 box rail. Packed with two washers, four hex nuts, and two end caps per pair; also contains two #5151 flashing brackets. Durable one piece, precision formed steel. Comes with self-lubricating Delrin bearings. 1/2" offset bolt adjusts both vertically and laterally from inside door. Connecting bolt threaded 6" adjusts laterally 1" by turning offset bolt for desired clearance. Safe Working Load - 225 lb. per hanger. 9" bolt,
Stanley 193714 Round Rail Hanger Stanley 264879 Astragal Rail Stanley 174284 Rail Hanger
Designed for use with round rail on wood-frame, metal-clad doors using a 2"x6" top lateral. 1/2? offset 9" bolt (with 7" thread) adjusts door vertically and laterally (1") from inside building. Flexible trunnion design resists door damage. Precision-ground and hardened steel roller bearings, axles and sleeves provide longer life and easier operation. Interchangeable with other brands of round rail. Safe Working Load - 300 lb. per hanger. Designed to cover the gap between bi-parting doors. Design allows it to wrap around the flashing channel of the vertical. Fits both TAB-LOC and EASY-FRAME door verticals and attaches with pop rivets. Can be installed before or after doors are hung. Boxed. Designed for use with box rail on wood-frame, metal-clad door using a 2"x4" or 2"x6" frame. For use with #59, #5100, #5103, #5104, #5105, #5110, #5114 or #5116 box rail. Packed with four washers, four hex nuts and two end caps per pair. 1/2" offset bolt adjusts both vertically and laterally from inside door. Connecting bolt threaded 7" adjusts laterally 1" by turning offset bolt for desired clearance. Durable one piece, precision formed steel. Each hardened axle has 12 hardened and precision-ground alloy steel roller-bearings. Delrin seals keep out dirt while holding in long-life grease. Safe Working Load - 300 lb. per hanger. 9" bolt.
Stanley 193656 Round Rail Hanger Stanley 112359 Flexible Door Hanger Stanley 168815 Track Hanger
Designed for use with round rail on wood-frame, metal-clad doors using a 2"x6" top lateral. 1/2? offset 9" bolt (with 7" thread) adjusts door vertically and laterally (1") from inside building. Flexible trunnion design resists door damage. Precision-ground and hardened steel roller bearings, axles and sleeves provide longer life and easier operation. Interchangeable with other brands of round rail. Safe Working Load - 300 lb. per hanger. Designed for use with box rail on wood-frame or metal clad doors using a 2"x4" or 2"x6" frame. For use with #59 or #5110 box rail. Packed with two washers, four hex nuts, and two end caps per pair; seventeen 3/8" x 2-1/2" lag bolts also are included for mounting rail. Durable one piece, precision formed steel. Comes with self-lubricating Delrin bearings. 1/2" offset bolt adjusts both vertically and laterally from inside door. Connecting bolt threaded 6" adjusts laterally 1" by turning offset bolt for desired clearance. Safe working load - 225 lb. per hanger. 9" bolt. Flexible with single door strap. Designed for use on wood-frame sliding doors from 1-1/2" to 2" thick. Slot in top of door strap allows lateral and vertical adjustment. 450 pound capacity per pair. Packed with two end caps and bolts for attaching door strap. Made of durable one-piece, precision-formed steel and has self-lubricating Delrin bearings. Boxed.
Stanley 5415BC Double Round Rail Bracket HANGER BX RAIL ZINC PLATED    Stanley 105270 Rail Track
Designed to be used with #5400 round rail to join and hold two double lengths of rail together for bi-passing doors. Includes lag bolt, two carriage bolts and two nuts. Suitable for use on corrugated metal siding due to narrow surface. Adjustable to bring rail closer or further away from building. 300 lb. safe working load. Designed for use with box rail on wood-frame sliding doors from 1-1/2" to 2" thick. For use with #5114 and #5116 box rail. Packed with bolts for attaching door straps. Durable one piece, precision formed steel. Comes with self-lubricating Delrin bearings. Double door strap has opposing holes for bolt mounting. Safe Working Load - 225 lb. per hanger. Designed for use on doors weighing up to 450 pounds. Rail drilled 24" OC for brackets. Can be used with many types of single and multiple brackets. Screws included. Meets ANSI/BHMA A 156.14, Grade 1. Rail is formed to give an even tread to hanger wheels.
Stanley 184408 Astragal Rail Stanley 112458 Flexible Door Hanger Stanley 104752 Adjustable Wall Mount Splice Bracket
Designed to cover the gap between bi-parting doors. Design allows it to wrap around the flashing channel of the vertical. Fits both TAB-LOC and EASY-FRAME door verticals and attaches with pop rivets. Can be installed before or after doors are hung. Boxed. Designed for use with box rail on wood-frame sliding doors from 1-1/2? to 2? thick. For use with #59 or #5110 box rail. Packed with nine 3/8" x 2" lag screws for mounting rail and two end caps. Hangers have vertical and lateral adjustments that can be made from outside building. Durable one piece, precision formed steel. Comes with self-lubricating Delrin bearings. 1/2" offset bolt is threaded 5-1/2" with a lateral adjustment of 1" by turning bolt. Safe working load - 225 lb. per hanger. Designed for mounting a double run of Stanley's 105270, 105676, 105213, and 105726 box rail on buildings with corrugated metal siding. Includes lags. Display Packed.
Trackmaster 5400 Plain Round Barn Door Rail Trackmaster 5400 Plain Round Barn Door Rail Stanley 112128 Trolley Rail Hanger
Designed for doors weighing up to 600 lb. per panel. Can be used with various types of single and multiple brackets. Advanced rail design with flat top and sides for easier mounting and better stability. Self cleaning and smoother operation. Interchangeable with other brands of round rail. Manufactured from galvanized steel. Designed for use on doors up to 450 lb. Can be used with many types of single and multiple brackets. Meets ANSI/BHMA A156.14, Grade 2. Rail is carefully formed to give an even tread to hanger wheels. Manufactured from galvanized steel. Rigid with 2-51F and 1-51G brackets with lag. Designed for use on wood-frame sliding doors from 1-1/2" to 2" thick. Slot in top of door strap allows lateral and vertical adjustment. 1 pair 5005 box rail hangers, 450 pound capacity per pair. Packed with two end caps and bolts for attaching door strap. Made of durable one-piece, precision-formed steel and has self-lubricating Delrin bearings.
Stanley 184416 Astragal Rail Stanley 193730 Round Rail Hanger Stanley 51K Triple Box Rail Bracket
Designed to cover the gap between bi-parting doors. Design allows it to wrap around the flashing channel of the vertical. Fits both TAB-LOC and EASY-FRAME door verticals and attaches with pop rivets. Can be installed before or after doors are hung. Boxed. 600 pound capacity. Pair flexible with door strap. Boxed. Designed to support a triple run of #5114 or #5116 box rail. Includes two lag bolts. 1 Bracket should be installed every 2 feet of rail. Can be used for triple bi-passing doors. Can also be used without middle bracket for 3-1/2" bi-passing doors. 300 lb. safe working load.
Stanley 105395 Box Rail Stanley 131458 Adjustable Door Bumper Stanley DP5420BC Single Round Rail Bracket
Designed for use on doors weighing up to 450 pounds. Rail drilled 24" OC for brackets. Can be used with many types of single and multiple brackets. Screws included. Meets ANSI/BHMA A 156.14, Grade 1. Rail is formed to give an even tread to hanger wheels. Adjustable 2-1/2" to 3-1/8". Pack Loose. Designed to be used with #5400 round rail to mount rail to side of building. Includes lag bolt. (1) Bracket should be installed every 2 feet of rail. Safe working load 300 lbs.
Stanley 194001 Round Snap-On Track Flashing Bracket Trackmaster 5400 Plain Box Barn Door Rail Stanley 193946 Round Face Mount Rail Bracket
Designed for use on doors 1" thick with National #5430/5433 Trackmaster round rail and #5450/5455 flashing. Boxed Loose. Designed for use on doors up to 450 lb. Can be used with many types of single and multiple brackets. Meets ANSI/BHMA A156.14, Grade 2. Rail is carefully formed to give an even tread to hanger wheels. Manufactured from galvanized steel. With mounting brackets, 600 pound capacity. Pack Loose.
Easy Frame 175661 Vertical Door Frame Stanley 161448 Bottom Mount Door Guide Stanley 142364 Box Rail
For 1-1/2" Steel / Wood Lateral Doors. Ln Loose. Designed for use on 1-1/2" thick wood frame sliding doors. When nailed to the bottom of a wood frame door, these guides engage with #6004 guide rail to prevent wind damage to both the door and building. Pre-punched mounting brackets are attached. Pack loose. Includes mounting/flashing brackets which are welded to the rail on 2 Ft. centers. Intended for doors weighing up to 450 lbs per panel. Boxed loose.
Stanley 51KS Triple Box Rail Bracket Easy Frame 175687 Vertical Door Frame Stanley 193953 Round Face Mount Rail Bracket
Designed to join a triple run of #5114 or #5116 box rail. Includes two lag bolts. Can be used for triple bi-passing doors. Can also be used without middle bracket for 3-1/2" bi-passing doors. One splice bracket should be installed on every length of rail to lock it in place. 300 lb. safe working load. For 1-1/2" Steel / Wood Lateral Doors. Ln Loose. With mounting brackets, 600 pound capacity. Pack Loose.
Stanley 142117 Top Mount Rail Bracket Stanley 161455 Bottom Mount Door Guide Easy Frame 175703 Vertical Door Frame
Includes mounting/flashing brackets which are welded to the rail on 2 Ft. centers. Intended for doors weighing up to 450 lbs per panel. Boxed loose. Designed for use on 1-1/2" thick wood frame sliding doors. When nailed to the bottom of a wood frame door, these guides engage with #6004 guide rail to prevent wind damage to both the door and building. Pre-punched mounting brackets are attached. Pack loose. For 1-1/2" Steel / Wood Lateral Doors. Ln Loose.
Stanley 193961 Round Face Mount Rail Bracket Stanley 106195 Covered Rail Stanley 142158 Top Mount Rail Bracket
With mounting brackets, 600 pound capacity. Pack Loose. Side-mounted rail designed for use on doors up to 450 lb. Cover is spot welded to top of rail with weld spots painted to prevent rusting. Brackets are not required since the cover provides a continuous bracket. Rail can be mounted with lag screws. Weather resistant. Includes mounting/flashing brackets which are welded to the rail on 2 Ft. centers. Intended for doors weighing up to 450 lbs per panel. Boxed loose.
Easy Frame 175729 Vertical Door Frame Stanley 174110 Box Rail Stanley 161463 Bottom Mount Door Guide
For 1-1/2" Steel / Wood Lateral Doors. Ln Loose. Designed for doors weighing up to 450 lb. One-piece, mounted design allows fast, simple installations without mounting brackets. Features a durable, white prefinished cover that is permanently welded to rail. Flashing pre-punched for attaching to 2"x6" track board with 2-1/2" ring shank nails with neoprene washer. Designed for use on 1-1/2" thick wood frame sliding doors. When nailed to the bottom of a wood frame door, these guides engage with #6004 guide rail to prevent wind damage to both the door and building. Pre-punched mounting brackets are attached. Pack loose.
Stanley 106112 Covered Rail Easy Frame 175745 Vertical Door Frame Stanley 161471 Bottom Mount Door Guide
Side-mounted rail designed for use on doors up to 450 lb. Cover is spot welded to top of rail with weld spots painted to prevent rusting. Brackets are not required since the cover provides a continuous bracket. Rail can be mounted with lag screws. Weather resistant. For 1-1/2" Steel / Wood Lateral Doors. Ln Loose. Designed for use on 1-1/2" thick wood frame sliding doors. When nailed to the bottom of a wood frame door, these guides engage with #6004 guide rail to prevent wind damage to both the door and building. Pre-punched mounting brackets are attached. Pack loose.
Stanley 104786 Adjustable Wall Mount Box Rail Bracket Stanley 193987 Face Mount Rail Bracket Stanley 142216 Box Rail
Designed for mounting a double run of #5114 or #5116 box rail. Includes 4 lag bolts, 2 carriage bolts and 2 nuts. Suitable for use on corrugated metal siding due to narrow mounting surface. 1 Bracket should be installed every 2 feet of rail. Adjustable to bring rail closer or further away from building. Can be used with flashing with the 5151 flashing bracket. 300lb. safe working load. With mounting brackets, 600 pound capacity. Pack Loose. Includes mounting/flashing brackets which are welded to the rail on 2 Ft. centers. Intended for doors weighing up to 450 lbs per panel. Boxed loose.
Stanley 174128 Top Mount Rail Bracket Stanley 106120 Covered Rail Stanley 174136 Box Rail
Designed for doors weighing up to 450 lb. One-piece, mounted design allows fast, simple installations without mounting brackets. Features a durable, white prefinished cover that is permanently welded to rail. Flashing pre-punched for attaching to 2"x6" track board with 2-1/2" ring shank nails with neoprene washer. Side-mounted rail designed for use on doors up to 450 lb. Cover is spot welded to top of rail with weld spots painted to prevent rusting. Brackets are not required since the cover provides a continuous bracket. Rail can be mounted with lag screws. Weather resistant. Designed for doors weighing up to 450 lb. One-piece, mounted design allows fast, simple installations without mounting brackets. Features a durable, white prefinished cover that is permanently welded to rail. Flashing pre-punched for attaching to 2"x6" track board with 2-1/2" ring shank nails with neoprene washer.
Stanley 174433 Box Rail
Designed for doors weighing up to 450 lb. One-piece, mounted design allows fast, simple installations without mounting brackets. Features a durable, white prefinished cover that is permanently welded to rail. Flashing pre-punched for attaching to 2"x6" track board with 2-1/2" ring shank nails with neoprene washer.
   
 
1