Home > HARDWARE > WINDOW & DOOR HARDWARE > ROLLING DOOR HARDWARE > ROLLING DOOR ACCESSORIES
Choose a sub category:
CYLINDER KEY BLANKS CYLINDER KEY BLANKS - PAINTED
Sort By:
1
Stanley 193839 Round Rail Track End Cap T-STRIKE PLATE GRADE 2 1PC    HARDWARE SLIDING DOOR ORB
With  bolt, nut and washer. Pack loose. T-strikes with full lip. 2-3/4" x 1-1/8" square corner. For Commercial Grade 2 Latches. ANSI TMS STRIKE. Connects multiple flat tracks for door openings wider than 36 inches. Includes fasteners for quick and easy installation. Use with decorative sliding door hardware kit N186-960.
STRIKE ASA                    ADAPTER CONN SLIDNG DR HDWR   Stanley 51L2 Double Triangle Bracket
STRIKE ASA
Our Price: $6.25
Strike plate for interior or exterior metal frame doors; commercial grade; 1-1/4" x 4-7/8" square corners. Connects multiple flat tracks for door openings wider than 36 inches. Includes fasteners for quick and easy installation. Use with decorative sliding door hardware kit N186-960. Designed to support double run of #5114 or #5116 box rail. Suitable for use on corrugated metal siding due to narrow surface. Does not come with rail bracket or fasteners. Can be used as double stop when used with #6008 door stop. 300 lb. safe working load.
ACCESSORY SLIDE DOOR ORB 4IN  HOOK PRIVACY STN NICKEL       ASA STRIKE PLATE GRADE 2 1PC
SLIDE DOOR ACC 4IN ORB
Our Price: $7.34
Adds a privacy function to any sliding door hardware door. Includes fasteners. Visual-pack. Adds a privacy function to any sliding door hardware door. Includes fasteners. T-strikes with full lip. 2-3/4" x 1-1/8" square corner. For Commercial Grade 2 Latches. ANSI TMS STRIKE.
Stanley 104331 Single Side Bracket Stanley DP5421BC Single Round Rail Splice Bracket BRACKET BOX RAIL ZINC
BOX RAIL BRACKETS GALV
Our Price: $9.39
BOX RAIL BRACKETS ZINC
Our Price: $10.00
Designed as a support bracket for Stanley's 105270, 105676, 105213, and 105726 box rail at 24" OC intervals. Includes lags. Display packed. Designed to be used with #5400 round rail to join and hold two lengths of rail together. Includes lag bolt and spice screws. Splice screws are inserted in holes at the end of round rail. Safe working load 300 lbs. Designed to join #5114 or #5116 box rail. Brackets can be installed on a 2 x 6 header board. Offset nail holes for quick placement. Compatible with 5438 & 5439 snap-on flashing brackets. Includes lag bolt and spice screws. Splice screws are inserted in holes at the end of rail. One splice bracket should be installed on every length of rail to lock it in place. Pack loose.
Stanley 104380 Splice Bracket ACCESSORY SLIDING DOOR SS 4IN ACCESSORY SLD DOOR ORB 2-1/8IN
Designed to join two pieces of Stanley's 105270, 105676, 105213, and 105726 box rail. Meets ANSI/BHMA A 156.14. Includes lags. Adds a privacy function to any sliding door hardware door. Includes fasteners. Visual-pack. Adds functionality to sliding door hardware. Installs on the inside of the sliding door to allow easy access. Includes fasteners.
CUP PULL STN NKL 2-1/8IN      National Hardware DP51MBC Single Box Rail Bracket TRUCK-BOX RAIL ZN
BOX RAIL BRACKETS GALV
Our Price: $12.73
Installs on the inside of the sliding door to allow easy access. Includes fasteners. Designed for mounting #5114 or #5116 box rail. Includes 2 lag bolts, carriage bolt and nut. BHMA A138.18. Suitable for use on corrugated metal siding due to narrow mounting surface on sliding door systems. Adjustable to bring rail closer or further away from building. 300 lb safe working load. 7.12"L x 3.25"W x 2"D. Can be used with flashing with the 5151 flashing bracket. Packed With Wheel Trucks Only. Durable one piece, precision formed steel. Comes with self-lubricating Deirin Bearings. Suitable for use with No 59, 5100, 5103, 5104, 5105, 5110, 5114 or 5116 box rail. 225 lb/hanger safe working load, 2.14" diameter. 4.15"L x 3"W x 1.61"D. Standards: BHMA A138.18 specified.
ACCESSORY SLID DOOR SS 2-1/8IN HARDWARE SLIDING DOOR SS      Stanley 51EDBC Box Rail End Cap
SLIDE DOOR ACC 2-1/8IN SS
Our Price: $13.42
SLIDING DOOR HARDWARE SS
Our Price: $15.50
Adds functionality to sliding door hardware. Installs on the inside of the sliding door to allow easy access. Includes fasteners. Connects multiple round tracks for door openings wider than 36 inches. Stainless steel prevents rust. Use with decorative sliding door hardware kit N186-962. Designed to press into rail to keep rail free of foreign materials from birds or weather . Can be used as center stop using 3/8" x 2" carriage bolts (not furnished). Often packed with box hangers.
National Hardware DP51MSB Single Box Rail Splice Bracket ACCESSORY SLIDE DOOR ORB 8IN  FLUSH PULL STN NKL 8IN
BOX RAIL BRACKETS GALV
Our Price: $17.01
SLIDE DOOR ACC 8IN ORB
Our Price: $23.34
Designed for mounting #5114 or #5116 box rail. Includes 2 lag bolts, carriage bolt and nut. BHMA A138.18. Suitable for use on corrugated metal siding due to narrow mounting surface on sliding door systems. Adjustable to bring rail closer or further away from building. 300 lb safe working load. 7.12"L x 3.25"W x 2"D. Can be used with flashing with the 5151 flashing bracket. One splice bracket should be installed on every length of rail to lock it in place. Provides a functional way to manuever a sliding door entry while complementing sliding door hardware design. Recommended for use on wood interior doors. Detailed installation template for quick and easy installation. Includes fasteners. 8" Length. Provides a functional way to maneuver a sliding door entry while complementing sliding door hardware design. Recommended for use on wood interior doors. Includes fasteners.
Stanley 5414BC Double Round Rail Bracket Stanley 105676 Rail Track ACCESSORY SLIDE DOOR ORB 10IN
SLIDE DOOR ACC 10IN ORB
Our Price: $27.42
Designed to be used with #5400 round rail to mount double runs of rail for by-passing doors to side of building installation. Includes lag bolt, two carriage bolts and two nuts. (1) Bracket should be installed every 2 feet of rail. Suitable for use on corrugated metal siding due to narrow mounting surface. Designed for use on doors weighing up to 450 pounds. Rail drilled 24" OC for brackets. Can be used with many types of single and multiple brackets. Screws included. Meets ANSI/BHMA A 156.14, Grade 1. Rail is formed to give an even tread to hanger wheels. Adds a rustic touch to interior sliding doors. Recommended for use on wood interior doors. Includes fasteners. Visual-pack.
BAR PULL STN NKL 10IN         Porter-Cable 59375 Strike and Latch Template ACCESSORY SLIDING DOOR SS 8IN
Adds a rustic touch to interior sliding door hardware. Recommended for use on wood interior doors. Includes fasteners. Fast routing of strike and latch plates. Includes high-speed steel router bit No.43670. Will route the following sizes: Strike plates; 1-1/8" x 2-3/4", 1-1/2" x 2-1/4" and 1-1/2" x 2-3/4". Latch plate: 1" x 2-1/4", 1-1/8" x 2-1/4" and 1-1/8" x 2-3/4". Provides a functional way to manuever a sliding door entry while complementing sliding door hardware design. Recommended for use on wood interior doors. Detailed installation template for quick and easy installation. Includes fasteners. 8" Length.
National Hardware 5001 Box Rail Hanger Stanley 105726 Rail Track ACCESSORY SLIDING DOOR SS 10IN
Designed for use with box rail. For use with #59, #5100, #5103, #5104, #5105, #5110, #5114 or #5116 box rail. Includes truck, connecting bolt and nuts. Packed without end caps. Made of durable one-piece, precision-formed steel. Comes with self-lubricating Delrin bearings. Safe working load - 225 lb. per hanger. 2.14" roller diameter. 4-1/2" bolt length, 4.49" overall length, 1.61" overall height. BHMA A138.18. Designed for use on doors weighing up to 450 pounds. Rail drilled 24" OC for brackets. Can be used with many types of single and multiple brackets. Screws included. Meets ANSI/BHMA A 156.14, Grade 1. Rail is formed to give an even tread to hanger wheels. Adds a contemporary touch to interior sliding doors. Recommended for use on wood interior doors. Includes fasteners. Visual-pack.
Trackmaster 5400 Plain Round Barn Door Rail Stanley 174268 Rail Hanger Stanley 261602 Flashing Bracket
Designed for doors weighing up to 600 lb. per panel. Can be used with various types of single and multiple brackets. Advanced rail design with flat top and sides for easier mounting and better stability. Self cleaning and smoother operation. Interchangeable with other brands of round rail. Manufactured from galvanized steel. Designed for use on wood-frame, metal-clad doors using a 2"x4" or 2"x6" frame with Stanley's 105270, 105676, 105213, and 105726 box rail. Includes two washers, four hex nuts, and two end caps per pair. Made of durable one-piece, precision-formed steel. Offers self-lubricating Delrin bearings. The 1/2" offset bolt adjusts both vertically and laterally from inside door. Connecting bolt threaded 7" adjusted laterally 1" by turning offset bolt for desired clearance. Can hold 450 lbs. per pair. 9" bolt. Boxed. With slots for 5120 flashings. Boxed loose.
Stanley 193847 Round Rail Splice Collar Stanley 112102 Trolley Rail Hanger Stanley 51HBC Double Box Rail Bracket
Designed for use with #5430, #5433, #5460 and #5465 round rail. Unique collar design supports the end of two rails while not interfering with flat mounting surface of rail. Fasteners are not required. Can be installed after rail is mounted to building. Rail bracket spacing holds collar in place. Rigid with single door strap. Designed for use on wood-frame sliding doors from 1-1/2" to 2" thick. Slot in top of door strap allows lateral and vertical adjustment. 450 pound capacity per pair. Packed with two end caps and bolts for attaching door strap. Made of durable one-piece, precision-formed steel and has self-lubricating Delrin bearings. Boxed. Designed to support a double run of #5114 or #5116 box rail. 1 Bracket should be installed every 2 feet of rail. Includes lag bolt. 300lb. safe working load.
Stanley 105213 Rail Track Trackmaster 5400 Plain Round Barn Door Rail Stanley 145581 Flexible Door Hanger
Designed for use on doors weighing up to 450 pounds. Rail drilled 24" OC for brackets. Can be used with many types of single and multiple brackets. Screws included. Meets ANSI/BHMA A 156.14, Grade 1. Rail is formed to give an even tread to hanger wheels. Designed for doors weighing up to 600 lb. per panel. Can be used with various types of single and multiple brackets. Advanced rail design with flat top and sides for easier mounting and better stability. Self cleaning and smoother operation. Interchangeable with other brands of round rail. Manufactured from galvanized steel. Designed for use with box rail on wood-frame or metal clad doors using a 2"x4" or 2"x6" frame. For use with #5100 or #5103 box rail. Packed with two washers, four hex nuts, and two end caps per pair; also contains two #5151 flashing brackets. Durable one piece, precision formed steel. Comes with self-lubricating Delrin bearings. 1/2" offset bolt adjusts both vertically and laterally from inside door. Connecting bolt threaded 6" adjusts laterally 1" by turning offset bolt for desired clearance. Safe Working Load - 225 lb. per hanger. 9" bolt,
Stanley 193714 Round Rail Hanger Stanley 174284 Rail Hanger Stanley 193656 Round Rail Hanger
Designed for use with round rail on wood-frame, metal-clad doors using a 2"x6" top lateral. 1/2? offset 9" bolt (with 7" thread) adjusts door vertically and laterally (1") from inside building. Flexible trunnion design resists door damage. Precision-ground and hardened steel roller bearings, axles and sleeves provide longer life and easier operation. Interchangeable with other brands of round rail. Safe Working Load - 300 lb. per hanger. Designed for use with box rail on wood-frame, metal-clad door using a 2"x4" or 2"x6" frame. For use with #59, #5100, #5103, #5104, #5105, #5110, #5114 or #5116 box rail. Packed with four washers, four hex nuts and two end caps per pair. 1/2" offset bolt adjusts both vertically and laterally from inside door. Connecting bolt threaded 7" adjusts laterally 1" by turning offset bolt for desired clearance. Durable one piece, precision formed steel. Each hardened axle has 12 hardened and precision-ground alloy steel roller-bearings. Delrin seals keep out dirt while holding in long-life grease. Safe Working Load - 300 lb. per hanger. 9" bolt. Designed for use with round rail on wood-frame, metal-clad doors using a 2"x6" top lateral. 1/2? offset 9" bolt (with 7" thread) adjusts door vertically and laterally (1") from inside building. Flexible trunnion design resists door damage. Precision-ground and hardened steel roller bearings, axles and sleeves provide longer life and easier operation. Interchangeable with other brands of round rail. Safe Working Load - 300 lb. per hanger.
Stanley 112359 Flexible Door Hanger Stanley 168815 Track Hanger Stanley 5415BC Double Round Rail Bracket
Designed for use with box rail on wood-frame or metal clad doors using a 2"x4" or 2"x6" frame. For use with #59 or #5110 box rail. Packed with two washers, four hex nuts, and two end caps per pair; seventeen 3/8" x 2-1/2" lag bolts also are included for mounting rail. Durable one piece, precision formed steel. Comes with self-lubricating Delrin bearings. 1/2" offset bolt adjusts both vertically and laterally from inside door. Connecting bolt threaded 6" adjusts laterally 1" by turning offset bolt for desired clearance. Safe working load - 225 lb. per hanger. 9" bolt. Flexible with single door strap. Designed for use on wood-frame sliding doors from 1-1/2" to 2" thick. Slot in top of door strap allows lateral and vertical adjustment. 450 pound capacity per pair. Packed with two end caps and bolts for attaching door strap. Made of durable one-piece, precision-formed steel and has self-lubricating Delrin bearings. Boxed. Designed to be used with #5400 round rail to join and hold two double lengths of rail together for bi-passing doors. Includes lag bolt, two carriage bolts and two nuts. Suitable for use on corrugated metal siding due to narrow surface. Adjustable to bring rail closer or further away from building. 300 lb. safe working load.
HANGER BX RAIL ZINC PLATED    Stanley 105270 Rail Track Stanley 112458 Flexible Door Hanger
Designed for use with box rail on wood-frame sliding doors from 1-1/2" to 2" thick. For use with #5114 and #5116 box rail. Packed with bolts for attaching door straps. Durable one piece, precision formed steel. Comes with self-lubricating Delrin bearings. Double door strap has opposing holes for bolt mounting. Safe Working Load - 225 lb. per hanger. Designed for use on doors weighing up to 450 pounds. Rail drilled 24" OC for brackets. Can be used with many types of single and multiple brackets. Screws included. Meets ANSI/BHMA A 156.14, Grade 1. Rail is formed to give an even tread to hanger wheels. Designed for use with box rail on wood-frame sliding doors from 1-1/2? to 2? thick. For use with #59 or #5110 box rail. Packed with nine 3/8" x 2" lag screws for mounting rail and two end caps. Hangers have vertical and lateral adjustments that can be made from outside building. Durable one piece, precision formed steel. Comes with self-lubricating Delrin bearings. 1/2" offset bolt is threaded 5-1/2" with a lateral adjustment of 1" by turning bolt. Safe working load - 225 lb. per hanger.
Stanley 104752 Adjustable Wall Mount Splice Bracket Trackmaster 5400 Plain Round Barn Door Rail Trackmaster 5400 Plain Round Barn Door Rail
Designed for mounting a double run of Stanley's 105270, 105676, 105213, and 105726 box rail on buildings with corrugated metal siding. Includes lags. Display Packed. Designed for doors weighing up to 600 lb. per panel. Can be used with various types of single and multiple brackets. Advanced rail design with flat top and sides for easier mounting and better stability. Self cleaning and smoother operation. Interchangeable with other brands of round rail. Manufactured from galvanized steel. Designed for use on doors up to 450 lb. Can be used with many types of single and multiple brackets. Meets ANSI/BHMA A156.14, Grade 2. Rail is carefully formed to give an even tread to hanger wheels. Manufactured from galvanized steel.
Stanley 112128 Trolley Rail Hanger Stanley 193730 Round Rail Hanger Stanley 51K Triple Box Rail Bracket
Rigid with 2-51F and 1-51G brackets with lag. Designed for use on wood-frame sliding doors from 1-1/2" to 2" thick. Slot in top of door strap allows lateral and vertical adjustment. 1 pair 5005 box rail hangers, 450 pound capacity per pair. Packed with two end caps and bolts for attaching door strap. Made of durable one-piece, precision-formed steel and has self-lubricating Delrin bearings. 600 pound capacity. Pair flexible with door strap. Boxed. Designed to support a triple run of #5114 or #5116 box rail. Includes two lag bolts. 1 Bracket should be installed every 2 feet of rail. Can be used for triple bi-passing doors. Can also be used without middle bracket for 3-1/2" bi-passing doors. 300 lb. safe working load.
Stanley 105395 Box Rail Stanley DP5420BC Single Round Rail Bracket Stanley 194001 Round Snap-On Track Flashing Bracket
Designed for use on doors weighing up to 450 pounds. Rail drilled 24" OC for brackets. Can be used with many types of single and multiple brackets. Screws included. Meets ANSI/BHMA A 156.14, Grade 1. Rail is formed to give an even tread to hanger wheels. Designed to be used with #5400 round rail to mount rail to side of building. Includes lag bolt. (1) Bracket should be installed every 2 feet of rail. Safe working load 300 lbs. Designed for use on doors 1" thick with National #5430/5433 Trackmaster round rail and #5450/5455 flashing. Boxed Loose.
Trackmaster 5400 Plain Box Barn Door Rail Stanley 193946 Round Face Mount Rail Bracket Stanley 142364 Box Rail
Designed for use on doors up to 450 lb. Can be used with many types of single and multiple brackets. Meets ANSI/BHMA A156.14, Grade 2. Rail is carefully formed to give an even tread to hanger wheels. Manufactured from galvanized steel. With mounting brackets, 600 pound capacity. Pack Loose. Includes mounting/flashing brackets which are welded to the rail on 2 Ft. centers. Intended for doors weighing up to 450 lbs per panel. Boxed loose.
Stanley 51KS Triple Box Rail Bracket Stanley 193953 Round Face Mount Rail Bracket Stanley 142117 Top Mount Rail Bracket
Designed to join a triple run of #5114 or #5116 box rail. Includes two lag bolts. Can be used for triple bi-passing doors. Can also be used without middle bracket for 3-1/2" bi-passing doors. One splice bracket should be installed on every length of rail to lock it in place. 300 lb. safe working load. With mounting brackets, 600 pound capacity. Pack Loose. Includes mounting/flashing brackets which are welded to the rail on 2 Ft. centers. Intended for doors weighing up to 450 lbs per panel. Boxed loose.
Stanley 193961 Round Face Mount Rail Bracket Stanley 106195 Covered Rail Stanley 142158 Top Mount Rail Bracket
With mounting brackets, 600 pound capacity. Pack Loose. Side-mounted rail designed for use on doors up to 450 lb. Cover is spot welded to top of rail with weld spots painted to prevent rusting. Brackets are not required since the cover provides a continuous bracket. Rail can be mounted with lag screws. Weather resistant. Includes mounting/flashing brackets which are welded to the rail on 2 Ft. centers. Intended for doors weighing up to 450 lbs per panel. Boxed loose.
Stanley 174110 Box Rail Stanley 106112 Covered Rail Stanley 104786 Adjustable Wall Mount Box Rail Bracket
Designed for doors weighing up to 450 lb. One-piece, mounted design allows fast, simple installations without mounting brackets. Features a durable, white prefinished cover that is permanently welded to rail. Flashing pre-punched for attaching to 2"x6" track board with 2-1/2" ring shank nails with neoprene washer. Side-mounted rail designed for use on doors up to 450 lb. Cover is spot welded to top of rail with weld spots painted to prevent rusting. Brackets are not required since the cover provides a continuous bracket. Rail can be mounted with lag screws. Weather resistant. Designed for mounting a double run of #5114 or #5116 box rail. Includes 4 lag bolts, 2 carriage bolts and 2 nuts. Suitable for use on corrugated metal siding due to narrow mounting surface. 1 Bracket should be installed every 2 feet of rail. Adjustable to bring rail closer or further away from building. Can be used with flashing with the 5151 flashing bracket. 300lb. safe working load.
Stanley 193987 Face Mount Rail Bracket Stanley 142216 Box Rail Stanley 174128 Top Mount Rail Bracket
With mounting brackets, 600 pound capacity. Pack Loose. Includes mounting/flashing brackets which are welded to the rail on 2 Ft. centers. Intended for doors weighing up to 450 lbs per panel. Boxed loose. Designed for doors weighing up to 450 lb. One-piece, mounted design allows fast, simple installations without mounting brackets. Features a durable, white prefinished cover that is permanently welded to rail. Flashing pre-punched for attaching to 2"x6" track board with 2-1/2" ring shank nails with neoprene washer.
Stanley 106120 Covered Rail Stanley 174136 Box Rail Stanley 174433 Box Rail
Side-mounted rail designed for use on doors up to 450 lb. Cover is spot welded to top of rail with weld spots painted to prevent rusting. Brackets are not required since the cover provides a continuous bracket. Rail can be mounted with lag screws. Weather resistant. Designed for doors weighing up to 450 lb. One-piece, mounted design allows fast, simple installations without mounting brackets. Features a durable, white prefinished cover that is permanently welded to rail. Flashing pre-punched for attaching to 2"x6" track board with 2-1/2" ring shank nails with neoprene washer. Designed for doors weighing up to 450 lb. One-piece, mounted design allows fast, simple installations without mounting brackets. Features a durable, white prefinished cover that is permanently welded to rail. Flashing pre-punched for attaching to 2"x6" track board with 2-1/2" ring shank nails with neoprene washer.
   
 
1