Home > HARDWARE > WINDOW & DOOR HARDWARE > ROLLING DOOR HARDWARE > ROLLING DOOR HARDWARE SETS
Sort By:
1
Prime Line M 6000 Round Edge Flat Tub Enclosure Roller Prime Line M6001 Round Edge Flat Tub Enclosure Roller Prime Line M 6022 Flat Shower Door Bottom Seal
1/4"W oval-edge nylon ball bearing wheel with 7/16" threaded hex hub. Includes truss head screw. Nylon ball bearing roller with threaded hex hub. Contents: 2 rollers with #8-32x3/8 Phillips binder head machine screws. For use on hinged shower doors.
Prime Line M-6014 Swinging Shower Door Catch Danco 64654B Oval Edge Bagged Door Roller Stanley 193839 Round Rail Track End Cap
1-5/16"W spring-loaded latch assembly for hinged shower doors. 9/16"W x 3/4"L x 1/2"H stainless steel housing with nylon tip. Includes two No.8 x 3/8" Phillips pan head sheet metal screws. Ball bearing construction, nylon wheel with 8-32 threaded center hole and 7-16" hub diameter that extends from back 1/8". With  bolt, nut and washer. Pack loose.
Prime Line M 6023 Star Shower Door Bottom Seal Prime Line M 6002 Round Edge Flat Tub Enclosure Roller Prime Line M 6003 Round Edge Flat Tub Enclosure Roller
"Star Tip" shaped; for use on hinged shower doors. 1/4"W oval-edge nylon ball bearing wheel with 7/16" threaded hex hub. Includes truss head screw. 1/4"W flat-edge nylon ball bearing wheel with 3/8" threaded hex hub. Includes truss head screw.
Prime Line M-6040 Tee Shape Tip Shower Door Sweep Kwikset 3437 3CP Rectangular Latch Strike Plate Prime Line M 6058 Door Guide
5/32" wide x 3/4" tall for use on hinged shower doors. Standard on non-U.L. locksets. Full lip square corner. 2-1/4"H, 1-5/8"CTC. Used by several shower door manufacturers for sliding tub-enclosure doors. 1"L x 1-9/16"W x 5/8"H overall. Fits 7/16" thick door rails.
Prime-Line M 6211 Shower Door Bottom Seal Prime Line M6067 Door Guide Danco 64652B Oval Edge Bagged Door Roller
T-shaped tip, fits into extrusion slot on bottom of swinging shower door to prevent water from leaking onto floor. Injection molded plastic bottom guide fits 7/16" thick door panels. Installed with double sided tape included.  Includes 1 guide. Ball bearing construction, nylon wheel with 8-32 threaded center hole and 7-16" hub diameter that extends from back 1/8".
Titan 18-32223CP Deadbolt T Strike SEAL SHOWER DR RUBBER 5/8X38IN SEAL SHOWER DR RUBBER 3/8X48IN
For the Maximum Security deadbolts. Standard on Nos.780 and 785. 1-3/4" inner CTC, 3" outer CTC. 3-5/8"H x 1-1/4"W. 3-hour fire rating with U.L. Titan and 1-1/2 hour fire rating with U.L. Kwikset locks and latch bolts.
Prime-Line M 6144 Shower Door Bottom Guide STRIKE ASA                    Prime Line E 2281 Replacement Passage Door Spring Latch
STRIKE ASA
Our Price: $6.25
Bottom guide used to keep glass door panels separated. Snaps into place on base of enclosure., Clear vinyl material. Strike plate for interior or exterior metal frame doors; commercial grade; 1-1/4" x 4-7/8" square corners. Square corner faceplate.Works with a 5/16" Star drive. Used on old style passage door locksets. Includes 1 latch and 1 set of installation screws. 1-1/32" x 2-1/4".
Stanley 51L2 Double Triangle Bracket Prime Line M 6090 Bottom Mount Door Guide Prime Line M 6054 Shower Door Roller Assembly
Designed to support double run of #5114 or #5116 box rail. Suitable for use on corrugated metal siding due to narrow surface. Does not come with rail bracket or fasteners. Can be used as double stop when used with #6008 door stop. 300 lb. safe working load. Nylon bottom guide for sliding tub enclosure doors; fits 1/2" thick door rails; snap-in tabs hold guide to track. Fits On:  International. Contents: 2 guides. Extruded aluminum bracket; 3/4" diameter flat edge, nylon ball bearing roller; thru-glass 1/4" binder post; used on frameless shower doors.Contents: 2 roller assemblies; 2 sets of installation screws.
Stanley 104331 Single Side Bracket Prime Line M 6145 Shower Door Roller Assembly Prime Line M 6191 Bottom Mount Door Hook Guide
BOX RAIL BRACKETS GALV
Our Price: $9.39
Designed as a support bracket for Stanley's 105270, 105676, 105213, and 105726 box rail at 24" OC intervals. Includes lags. Display packed. Extruded aluminum bracket; 3/4" diameter oval edge, nylon ball bearing roller; used on frameless shower doors. Contents: 2 roller assemblies. Bottom guide for sliding shower enclosure doors.
Stanley DP5421BC Single Round Rail Splice Bracket BRACKET BOX RAIL ZINC         Stanley 104380 Splice Bracket
BOX RAIL BRACKETS ZINC
Our Price: $10.00
Designed to be used with #5400 round rail to join and hold two lengths of rail together. Includes lag bolt and spice screws. Splice screws are inserted in holes at the end of round rail. Safe working load 300 lbs. Designed to join #5114 or #5116 box rail. Brackets can be installed on a 2 x 6 header board. Offset nail holes for quick placement. Compatible with 5438 & 5439 snap-on flashing brackets. Includes lag bolt and spice screws. Splice screws are inserted in holes at the end of rail. One splice bracket should be installed on every length of rail to lock it in place. Pack loose. Designed to join two pieces of Stanley's 105270, 105676, 105213, and 105726 box rail. Meets ANSI/BHMA A 156.14. Includes lags.
National Hardware DP51MBC Single Box Rail Bracket Prime Line M6158 Shower Door Handleset TRUCK-BOX RAIL ZN
BOX RAIL BRACKETS GALV
Our Price: $12.73
Designed for mounting #5114 or #5116 box rail. Includes 2 lag bolts, carriage bolt and nut. BHMA A138.18. Suitable for use on corrugated metal siding due to narrow mounting surface on sliding door systems. Adjustable to bring rail closer or further away from building. 300 lb safe working load. 7.12"L x 3.25"W x 2"D. Can be used with flashing with the 5151 flashing bracket. Plated diecast handles; outside handle with threaded studs and inside handle with holes; supplied with stainless steel machine screws. Contents: 1 handle set with installation screws. Packed With Wheel Trucks Only. Durable one piece, precision formed steel. Comes with self-lubricating Deirin Bearings. Suitable for use with No 59, 5100, 5103, 5104, 5105, 5110, 5114 or 5116 box rail. 225 lb/hanger safe working load, 2.14" diameter. 4.15"L x 3"W x 1.61"D. Standards: BHMA A138.18 specified.
LATCHBOLT UNGUARDED 2-3/8IN   LATCHBOLT GUARDED 2-3/8IN     Prime-Line M 6230 Half Round Shower Door Bottom Seal
LATCHBOLT GUARDED 2-3/8IN
Our Price: $13.38
Unguarded Latch - For passage and privacy locksets; SV series standard duty cylindrical knob and SK series lever locksets; the square face latch bolt has a 2-3/8" backset; UL listed for "A label" single swing doors. Guarded Latch - For entry, storeroom and classroom locksets; Grade 2 with a 1/2" throw and a 2-3/8" backset; UL listed with a dead lasting function. Prime-Line Shower Door Bottom Seal, Half Round, 36 in Length, 13/16 in Height, Vinyl, Gray
Prime-Line M 6111 Sliding Shower Door Bottom Guide Stanley 51EDBC Box Rail End Cap National Hardware DP51MSB Single Box Rail Splice Bracket
BOX RAIL BRACKETS GALV
Our Price: $17.01
Clear acrylic bottom guide for sliding tub enclosure doors. Fits on 1/2" thick panels. Used by Sterling and others. Designed to press into rail to keep rail free of foreign materials from birds or weather . Can be used as center stop using 3/8" x 2" carriage bolts (not furnished). Often packed with box hangers. Designed for mounting #5114 or #5116 box rail. Includes 2 lag bolts, carriage bolt and nut. BHMA A138.18. Suitable for use on corrugated metal siding due to narrow mounting surface on sliding door systems. Adjustable to bring rail closer or further away from building. 300 lb safe working load. 7.12"L x 3.25"W x 2"D. Can be used with flashing with the 5151 flashing bracket. One splice bracket should be installed on every length of rail to lock it in place.
Stanley 5414BC Double Round Rail Bracket Stanley 105676 Rail Track Stanley 105726 Rail Track
Designed to be used with #5400 round rail to mount double runs of rail for by-passing doors to side of building installation. Includes lag bolt, two carriage bolts and two nuts. (1) Bracket should be installed every 2 feet of rail. Suitable for use on corrugated metal siding due to narrow mounting surface. Designed for use on doors weighing up to 450 pounds. Rail drilled 24" OC for brackets. Can be used with many types of single and multiple brackets. Screws included. Meets ANSI/BHMA A 156.14, Grade 1. Rail is formed to give an even tread to hanger wheels. Designed for use on doors weighing up to 450 pounds. Rail drilled 24" OC for brackets. Can be used with many types of single and multiple brackets. Screws included. Meets ANSI/BHMA A 156.14, Grade 1. Rail is formed to give an even tread to hanger wheels.
Trackmaster 5400 Plain Round Barn Door Rail Stanley 261602 Flashing Bracket Stanley 193847 Round Rail Splice Collar
Designed for doors weighing up to 600 lb. per panel. Can be used with various types of single and multiple brackets. Advanced rail design with flat top and sides for easier mounting and better stability. Self cleaning and smoother operation. Interchangeable with other brands of round rail. Manufactured from galvanized steel. With slots for 5120 flashings. Boxed loose. Designed for use with #5430, #5433, #5460 and #5465 round rail. Unique collar design supports the end of two rails while not interfering with flat mounting surface of rail. Fasteners are not required. Can be installed after rail is mounted to building. Rail bracket spacing holds collar in place.
Stanley 51HBC Double Box Rail Bracket Stanley 105213 Rail Track Trackmaster 5400 Plain Round Barn Door Rail
Designed to support a double run of #5114 or #5116 box rail. 1 Bracket should be installed every 2 feet of rail. Includes lag bolt. 300lb. safe working load. Designed for use on doors weighing up to 450 pounds. Rail drilled 24" OC for brackets. Can be used with many types of single and multiple brackets. Screws included. Meets ANSI/BHMA A 156.14, Grade 1. Rail is formed to give an even tread to hanger wheels. Designed for doors weighing up to 600 lb. per panel. Can be used with various types of single and multiple brackets. Advanced rail design with flat top and sides for easier mounting and better stability. Self cleaning and smoother operation. Interchangeable with other brands of round rail. Manufactured from galvanized steel.
Stanley 5415BC Double Round Rail Bracket Stanley 105270 Rail Track Stanley 104752 Adjustable Wall Mount Splice Bracket
Designed to be used with #5400 round rail to join and hold two double lengths of rail together for bi-passing doors. Includes lag bolt, two carriage bolts and two nuts. Suitable for use on corrugated metal siding due to narrow surface. Adjustable to bring rail closer or further away from building. 300 lb. safe working load. Designed for use on doors weighing up to 450 pounds. Rail drilled 24" OC for brackets. Can be used with many types of single and multiple brackets. Screws included. Meets ANSI/BHMA A 156.14, Grade 1. Rail is formed to give an even tread to hanger wheels. Designed for mounting a double run of Stanley's 105270, 105676, 105213, and 105726 box rail on buildings with corrugated metal siding. Includes lags. Display Packed.
Trackmaster 5400 Plain Round Barn Door Rail Trackmaster 5400 Plain Round Barn Door Rail Stanley 51K Triple Box Rail Bracket
Designed for doors weighing up to 600 lb. per panel. Can be used with various types of single and multiple brackets. Advanced rail design with flat top and sides for easier mounting and better stability. Self cleaning and smoother operation. Interchangeable with other brands of round rail. Manufactured from galvanized steel. Designed for use on doors up to 450 lb. Can be used with many types of single and multiple brackets. Meets ANSI/BHMA A156.14, Grade 2. Rail is carefully formed to give an even tread to hanger wheels. Manufactured from galvanized steel. Designed to support a triple run of #5114 or #5116 box rail. Includes two lag bolts. 1 Bracket should be installed every 2 feet of rail. Can be used for triple bi-passing doors. Can also be used without middle bracket for 3-1/2" bi-passing doors. 300 lb. safe working load.
Stanley 105395 Box Rail Stanley DP5420BC Single Round Rail Bracket Stanley 194001 Round Snap-On Track Flashing Bracket
Designed for use on doors weighing up to 450 pounds. Rail drilled 24" OC for brackets. Can be used with many types of single and multiple brackets. Screws included. Meets ANSI/BHMA A 156.14, Grade 1. Rail is formed to give an even tread to hanger wheels. Designed to be used with #5400 round rail to mount rail to side of building. Includes lag bolt. (1) Bracket should be installed every 2 feet of rail. Safe working load 300 lbs. Designed for use on doors 1" thick with National #5430/5433 Trackmaster round rail and #5450/5455 flashing. Boxed Loose.
Trackmaster 5400 Plain Box Barn Door Rail Stanley 193946 Round Face Mount Rail Bracket Stanley 142364 Box Rail
Designed for use on doors up to 450 lb. Can be used with many types of single and multiple brackets. Meets ANSI/BHMA A156.14, Grade 2. Rail is carefully formed to give an even tread to hanger wheels. Manufactured from galvanized steel. With mounting brackets, 600 pound capacity. Pack Loose. Includes mounting/flashing brackets which are welded to the rail on 2 Ft. centers. Intended for doors weighing up to 450 lbs per panel. Boxed loose.
Stanley 51KS Triple Box Rail Bracket Stanley 193953 Round Face Mount Rail Bracket Stanley 142117 Top Mount Rail Bracket
Designed to join a triple run of #5114 or #5116 box rail. Includes two lag bolts. Can be used for triple bi-passing doors. Can also be used without middle bracket for 3-1/2" bi-passing doors. One splice bracket should be installed on every length of rail to lock it in place. 300 lb. safe working load. With mounting brackets, 600 pound capacity. Pack Loose. Includes mounting/flashing brackets which are welded to the rail on 2 Ft. centers. Intended for doors weighing up to 450 lbs per panel. Boxed loose.
Stanley 193961 Round Face Mount Rail Bracket Stanley 106195 Covered Rail Stanley 142158 Top Mount Rail Bracket
With mounting brackets, 600 pound capacity. Pack Loose. Side-mounted rail designed for use on doors up to 450 lb. Cover is spot welded to top of rail with weld spots painted to prevent rusting. Brackets are not required since the cover provides a continuous bracket. Rail can be mounted with lag screws. Weather resistant. Includes mounting/flashing brackets which are welded to the rail on 2 Ft. centers. Intended for doors weighing up to 450 lbs per panel. Boxed loose.
HARDWARE SLIDING DOOR ORB 72IN Stanley 174110 Box Rail HARDWARE DECO SLIDING DOOR
Adds rustic appeal to interior door openings. Adds style and privacy to an open doorway. Includes all mounting hardware and components to hang one interior door. Pre-drilled tracks. Accommodates openings of up to 36-in wide; for openings wider than 36-in use multiple kits. For single doors 1-3/8? and 1-3/4? thick. Accommodates single doors up to 200 lbs. Includes detailed instructions for easy installation. Designed and tested to follow ANSI/BHMA Grade 1 Standards. Use connecting adaptor N187-002 to connect multiple pieces of track. Designed for doors weighing up to 450 lb. One-piece, mounted design allows fast, simple installations without mounting brackets. Features a durable, white prefinished cover that is permanently welded to rail. Flashing pre-punched for attaching to 2"x6" track board with 2-1/2" ring shank nails with neoprene washer. Adds rustic appeal to interior door openings. Adds style and privacy to an open doorway. Includes all mounting hardware and components to hang one interior door. Pre-drilled tracks. Accommodates openings of up to 36-in wide; for openings wider than 36-in use multiple kits. For single doors 1-3/8? and 1-3/4? thick. Accommodates single doors up to 200 lbs. Includes detailed instructions for easy installation. Designed and tested to follow ANSI/BHMA Grade 1 Standards. Use connecting adaptor N187-002 to connect multiple pieces of track.
Stanley 106112 Covered Rail HARDWARE SLIDING DOOR ORB 72IN DOOR BARN HDWR KIT MATTE BLACK
Side-mounted rail designed for use on doors up to 450 lb. Cover is spot welded to top of rail with weld spots painted to prevent rusting. Brackets are not required since the cover provides a continuous bracket. Rail can be mounted with lag screws. Weather resistant. Adds a rustic appeal to interior door openings. Cost effective way to add style and privacy to an open doorway. Includes all mounting hardware and components to hang one interior door. Accommodates openings of up to 36-in wide; for openings wider than 36-in use multiple kits. For single doors 1-3/8? and 1-3/4" thick. Accommodates single doors up to 200 lbs. Includes detailed instructions for easy installation. Designed and tested to follow ANSI/BHMA Grade 1 Standards. Use connecting adaptor N187-001 to connect multiple pieces of track. Supports single door with a thickness of 1-3/8"; maximum weight up to 250 lbs. Ideal for openings up to 36" wide and openings wider than 36" require multiple tracks. Wheels provide excellent strength and durability as well as smoothness of travel along the rail. Anti-jump discs prevent hanger wheels from jumping off the track. All mounting hardware included.
DOOR BARN HDWR KIT ANTIQUE BRZ DOOR BARN HDWR KIT MATTE BLACK DOOR BARN HDWR KIT ANTIQUE BRZ
Supports single door with a thickness of 1-3/8"; maximum weight up to 250 lbs. Ideal for openings up to 36" wide and openings wider than 36" require multiple tracks. Wheels provide excellent strength and durability as well as smoothness of travel along the rail. Anti-jump discs prevent hanger wheels from jumping off the track. All mounting hardware included. Supports single door with a thickness of 1-3/8"; maximum weight up to 250 lbs. Ideal for openings up to 36" wide and openings wider than 36" require multiple tracks. Wheels provide excellent strength and durability as well as smoothness of travel along the rail. Anti-jump discs prevent hanger wheels from jumping off the track. All mounting hardware included. Supports single door with a thickness of 1-3/8"; maximum weight up to 250 lbs. Ideal for openings up to 36" wide and openings wider than 36" require multiple tracks. Wheels provide excellent strength and durability as well as smoothness of travel along the rail. Anti-jump discs prevent hanger wheels from jumping off the track. All mounting hardware included.
DOOR BARN HDWR KIT MATTE BLACK DOOR BARN HDWR KIT ANTIQUE BRZ Stanley 104786 Adjustable Wall Mount Box Rail Bracket
Supports single door with the Standard 78-3/4" or 96"  track is suitable for use with standard 1-3/8" or 1-3/4" thick doors.; maximum weight up to 250 lbs. Ideal for openings up to 36". wide and openings wider than 36 in. require multiple tracks. Wheels provide excellent strength and durability as well as smoothness of travel along the rail. Anti-jump discs prevent hanger wheels from jumping off the track. All mounting hardware included. Supports single door with the Standard 78-3/4" or 96"  track is suitable for use with standard 1-3/8" or 1-3/4" thick doors.; maximum weight up to 250 lbs. Ideal for openings up to 36". wide and openings wider than 36 in. require multiple tracks. Wheels provide excellent strength and durability as well as smoothness of travel along the rail. Anti-jump discs prevent hanger wheels from jumping off the track. All mounting hardware included. Designed for mounting a double run of #5114 or #5116 box rail. Includes 4 lag bolts, 2 carriage bolts and 2 nuts. Suitable for use on corrugated metal siding due to narrow mounting surface. 1 Bracket should be installed every 2 feet of rail. Adjustable to bring rail closer or further away from building. Can be used with flashing with the 5151 flashing bracket. 300lb. safe working load.
Stanley 193987 Face Mount Rail Bracket Stanley 142216 Box Rail HARDWARE SLIDING DOOR SS 72IN
With mounting brackets, 600 pound capacity. Pack Loose. Includes mounting/flashing brackets which are welded to the rail on 2 Ft. centers. Intended for doors weighing up to 450 lbs per panel. Boxed loose. Adds rustic appeal to interior door openings. Adds style and privacy to an open doorway. Includes all mounting hardware and components to hang one interior door. Pre-drilled tracks. Accommodates openings of up to 36-in wide; for openings wider than 36-in use multiple kits. For single doors 1-3/8? and 1-3/4? thick. Accommodates single doors up to 200 lbs. Includes detailed instructions for easy installation. Designed and tested to follow ANSI/BHMA Grade 1 Standards. Use connecting adaptor N187-002 to connect multiple pieces of track.
Stanley 174128 Top Mount Rail Bracket DOOR BARN HDWR KIT MATTE BLACK DOOR BARN HDWR KIT ANTIQUE BRZ
Designed for doors weighing up to 450 lb. One-piece, mounted design allows fast, simple installations without mounting brackets. Features a durable, white prefinished cover that is permanently welded to rail. Flashing pre-punched for attaching to 2"x6" track board with 2-1/2" ring shank nails with neoprene washer. Supports single door with a thickness of 1-3/8"; maximum weight up to 250 lbs. Ideal for openings up to 36" wide and openings wider than 36" require multiple tracks. Wheels provide excellent strength and durability as well as smoothness of travel along the rail. Anti-jump discs prevent hanger wheels from jumping off the track. All mounting hardware included. Supports single door with a thickness of 1-3/8"; maximum weight up to 250 lbs. Ideal for openings up to 36" wide and openings wider than 36" require multiple tracks. Wheels provide excellent strength and durability as well as smoothness of travel along the rail. Anti-jump discs prevent hanger wheels from jumping off the track. All mounting hardware included.
DOOR BARN HDWR KIT MATTE BLACK DOOR BARN HDWR KIT ANTIQUE BRZ DOOR BARN HDWR KIT MATTE BLACK
Supports single door with a thickness of 1-3/8"; maximum weight up to 250 lbs. Ideal for openings up to 36" wide and openings wider than 36" require multiple tracks. Wheels provide excellent strength and durability as well as smoothness of travel along the rail. Anti-jump discs prevent hanger wheels from jumping off the track. All mounting hardware included. Supports single door with a thickness of 1-3/8"; maximum weight up to 250 lbs. Ideal for openings up to 36" wide and openings wider than 36" require multiple tracks. Wheels provide excellent strength and durability as well as smoothness of travel along the rail. Anti-jump discs prevent hanger wheels from jumping off the track. All mounting hardware included. Supports single door with the Standard 78-3/4" or 96"  track is suitable for use with standard 1-3/8" or 1-3/4" thick doors.; maximum weight up to 250 lbs. Ideal for openings up to 36". wide and openings wider than 36 in. require multiple tracks. Wheels provide excellent strength and durability as well as smoothness of travel along the rail. Anti-jump discs prevent hanger wheels from jumping off the track. All mounting hardware included.
DOOR BARN HDWR KIT ANTIQUE BRZ Stanley 106120 Covered Rail DOOR BARN HDWR KIT STNLS STEEL
Supports single door with the Standard 78-3/4" or 96"  track is suitable for use with standard 1-3/8" or 1-3/4" thick doors.; maximum weight up to 250 lbs. Ideal for openings up to 36". wide and openings wider than 36 in. require multiple tracks. Wheels provide excellent strength and durability as well as smoothness of travel along the rail. Anti-jump discs prevent hanger wheels from jumping off the track. All mounting hardware included. Side-mounted rail designed for use on doors up to 450 lb. Cover is spot welded to top of rail with weld spots painted to prevent rusting. Brackets are not required since the cover provides a continuous bracket. Rail can be mounted with lag screws. Weather resistant. Supports single door with a thickness of 1-3/8"; maximum weight up to 250 lbs. Ideal for openings up to 36" wide and openings wider than 36" require multiple tracks. Wheels provide excellent strength and durability as well as smoothness of travel along the rail. Anti-jump discs prevent hanger wheels from jumping off the track. All mounting hardware included.
DOOR BARN HDWR KIT STNLS STEEL DOOR BARN HDWR KIT STNLS STEEL DOOR BARN HDWR KIT STNLS STEEL
Supports single door with a thickness of 1-3/8"; maximum weight up to 250 lbs. Ideal for openings up to 36" wide and openings wider than 36" require multiple tracks. Wheels provide excellent strength and durability as well as smoothness of travel along the rail. Anti-jump discs prevent hanger wheels from jumping off the track. All mounting hardware included. Supports single door with the Standard 78-3/4" or 96"  track is suitable for use with standard 1-3/8" or 1-3/4" thick doors.; maximum weight up to 250 lbs. Ideal for openings up to 36". wide and openings wider than 36 in. require multiple tracks. Wheels provide excellent strength and durability as well as smoothness of travel along the rail. Anti-jump discs prevent hanger wheels from jumping off the track. All mounting hardware included. Supports single door with a thickness of 1-3/8"; maximum weight up to 250 lbs. Ideal for openings up to 36" wide and openings wider than 36" require multiple tracks. Wheels provide excellent strength and durability as well as smoothness of travel along the rail. Anti-jump discs prevent hanger wheels from jumping off the track. All mounting hardware included.
Stanley 174136 Box Rail DOOR BARN HDWR KIT STNLS STEEL Stanley 174433 Box Rail
Designed for doors weighing up to 450 lb. One-piece, mounted design allows fast, simple installations without mounting brackets. Features a durable, white prefinished cover that is permanently welded to rail. Flashing pre-punched for attaching to 2"x6" track board with 2-1/2" ring shank nails with neoprene washer. Supports single door with the Standard 78-3/4" or 96"  track is suitable for use with standard 1-3/8" or 1-3/4" thick doors.; maximum weight up to 250 lbs. Ideal for openings up to 36". wide and openings wider than 36 in. require multiple tracks. Wheels provide excellent strength and durability as well as smoothness of travel along the rail. Anti-jump discs prevent hanger wheels from jumping off the track. All mounting hardware included. Designed for doors weighing up to 450 lb. One-piece, mounted design allows fast, simple installations without mounting brackets. Features a durable, white prefinished cover that is permanently welded to rail. Flashing pre-punched for attaching to 2"x6" track board with 2-1/2" ring shank nails with neoprene washer.
   
 
1