Home > HARDWARE > WINDOW & DOOR HARDWARE > FOLDING DOORS/HARDWARE > BIFOLD DOOR HARDWARE
Choose a sub category:
KEYING KITS- KEYING KITS- KEYING KITS-KWIKSET
KEYING KITS-KWIKSET KEYING KITS-SCHLAGE KEYING KITS-SCHLAGE
KEYING PARTS-KWIKSET KEYING PARTS-KWIKSET LATCHBOLTS-MINTCRAFT
LATCHBOLTS-MINTCRAFT LATCHBOLTS-KWIKSET LATCHBOLTS-KWIKSET
LATCHBOLTS-SCHLAGE LATCHBOLTS-SCHLAGE LATCHBOLTS-MISC
LATCHBOLTS-MISC STRIKE PLATES-MINTCRAFT STRIKE PLATES-MINTCRAFT
STRIKE PLATES-KWIKSET STRIKE PLATES-KWIKSET MISC LOCK PARTS
MISC LOCK PARTS LOCK INSTALLATION TEMPLATES LOCK INSTALLATION TEMPLATES
Sort By:
1
DOOR KEY EMERGENCY            Prime Line N 6565 Door Guide Prime Line N-6538 Surface Aligner
For use in Kwikset-brand interior/privacy locksets; conveniently stores above door for ease of use. Single door; nylon retainer. Used by many manufacturers. Includes four no. 8 x 3/4" Phillips pan head sheet metal screws. Universal design, zinc plated steel. Mounts to back of lead doors to maintain tight closure in openings not entered from both sides. Includes set of 1-1/8"H aligners and four No.8 x 3/4" Phillips pan head sheet metal screws.
Prime Line N-6846 Finger Pull Prime Line N6640 Adjustable Pivot Bracket Assembly Kwikset 7615 Titan Rekeying Tool
Plated steel, universal design fits a 3/4" diameter hole. Stamped steel bracket mounts into top or bottom track; fits on "Slimfold" and others. Kwikset 6 pin control key blank; the "Titan" control key allows removal of cylinder without dismantling lock.
National Hardware MPB142 Recessed Cup Pull National Hardware MPB142 Cup Pull National Hardware MPB142 Cup Pull
National Hardware Cup Pull, Recessed, Series: MPB142, Suitable For Use With: 1/4 in and Larger Size Panels, 3/4 in Diameter, Steel, Brass National Hardware Cup Pull, Series: MPB142, Suitable For Use With: 1/4 in and Larger Size Panels, 3/4 in Diameter, Steel, Satin Nickel National Hardware Cup Pull, Series: MPB142, Suitable For Use With: 1/4 in and Larger Size Panels, 3/4 in Diameter, Steel, Antique Bronze
Prime Line N 6567 Door Guide Prime Line N 6606 Adjustable Pivot Bracket Prime Line N 6562 Floor Mount Door Guide
One pair fits any thickness single door; install a series of pairs for multiple doors. Includes one pair of 1"H nylon guides and four No.8 x 3/4" Phillips pan head screws. Fits Acme 2900 Series bi-fold doors. Steel bracket mounts into top track. 1-15/16"L x 3/4"W overall. Used by many door manufacturers. 2-7/8"L adjustable bottom-mount nylon bracket and nylon spacer guide pins. For 3/4" to 1-3/8" thick bypassing doors. Includes three No.8 x 3/4" Phillips pan head screws.
Prime Line N 6563 Door Guide PART SLIDING DOOR BRS 1-3/4IN Prime Line N 6587 Adjustable Pivot Bracket
4-3/16"L x 1"W nylon guide with 1-3/8" between each spacer. For 1-3/8" thick bypassing doors. Includes two No.8 x 3/4" Phillips pan head screws. Designed for by-passing, pocket and other sliding doors. Works on panels 1/4 inch or larger. Bagged. Fits on Cox doors for horizontal adjustments. Adjustable stamped steel bracket and nylon bushing. 2-7/8"L x 7/8"D x 1-5/16"H overall. For 1" to 1-3/8" thick folding doors up to 50 lbs. each. Includes 2 No.8 x 3/4" Phillips pan head screws and 1 No.8 x 1-1/4" Phillips flat head screw.
Prime Line N-6893 Finger Pull Johnson 1808PPK1 Door Aligner Prime Line N6700 Spring Loaded Top Pin Door Pivot
Plated steel, universal design fits a 3/4" diameter hole. 1-1/4 inch x 2 inch, universal bi-fold door aligner, yellow zinc plated finish. Used by many wardrobe door manufacturers. 3/8"OD x 1"H nylon base and 1/4"OD pin with 5/16"H tip and 5/8"H from base to tip.
National Hardware V144 Recessed Cup Pull National Hardware V145 Recessed Cup Pull Prime Line N 6756 Door Knob
National Hardware Cup Pull, Recessed, Series: V144, Suitable For Use With: 1/4 in and Larger Size Panels, 1-3/4 in Diameter, 0.34 in Depth, Steel, Brass, Includes: Nails National Hardware Cup Pull, Recessed, Series: V145, Suitable For Use With: 1/4 in and Larger Size Panels, 2-1/8 in Diameter, Steel, Brass, Includes: Nails Stainable and paintable, for use on hollow core or solid wood bi-fold door panels. 1-3/4"D x 1"H. Includes installation screws.
Kwikset 81467 Lock Cylinder Remover Prime Line N6696 Adjustable Bottom Pin Door Pivot National Hardware V145 Cup Pull
Commonly referred to as "Pickle Fork." Use for servicing cylinders. Fits doors of many wardrobe manufacturers. Adjustable steel pivot with 1-3/8"H nylon base and 15/32"OD grooved tip sized for use with specified jamb brackets. National Hardware Cup Pull, Series: V145, Suitable For Use With: 1/4 in and Larger Size Panels, 2-1/8 in Diameter, Steel, Antique Bronze
GUIDE BI-PASSDR NYLN/STL      National Hardware V145 Cup Pull Prime Line N 6543 Adjustable Pivot Bracket
Steel base with nylon guide tips. Adjustment for either 1-3/8" thick doors or 3/4" thick. Designed for use with N-6795 carpet riser. Used by Johnson Hardware. National Hardware Cup Pull, Series: V145, Suitable For Use With: 1/4 in and Larger Size Panels, 2-1/8 in Diameter, Steel, Satin Nickel Fits on Acme doors. Adjustable stamped steel bracket and self-lubricating nylon bushing. 2-15/16"L x 15/16"D x 1-3/16"H overall. For 1" to 1-3/8" thick folding doors up to 50 lbs. each. Includes 2 No.8 x 3/4" Phillips pan head screws and 1 No.8 x 1-1/4" Phillips flat head screw.
Prime Line N6673 Adjustable Bottom Pin Door Pivot Schlage SPS221B-605/SP221 Round Door Pull Prime Line N6729 Top Pivot/Guide Rod Pin
Fits doors of many wardrobe manufacturers. Adjustable steel pivot with 1-3/8"H nylon base and 15/32"OD grooved tip sized for use with specified jamb brackets. 2-1/8" Diameter hole - slim pak -polybagged. For steel frame bi-folding doors. 1/4"OD spring-loaded steel rod with 3/8"OD x 5/16"H white nylon guide cap, 5-5/8"H overall.
PART DOOR FLDG ZINC PLATED    Johnson 2135PPK1 Door Guide Prime Line N6672 Top Pin Door Pivot/Guide
One piece metal guide plate. Pivoting nylon guide posts stays  parallel to the door preventing door binding. 3/4" or 1-3/8" adjustable for slight door thickness variations. Used by many wardrobe door manufacturers. Solid-nylon guide and pivot. 3/8"OD x 1"H base and 3/8"OD x 5/8"H guide tip.
Prime Line N 6835 Door Shutter Hinge Prime Line N-6765 Round Lever Pull Handle PART SLIDING DOOR TAN
SLIDING DOOR PARTS TAN
Our Price: $3.12
Used on bi-folding shutter doors. Allows for non-mortise installation. 7/8"W x 1"H each hinge piece, 2"H overall. Includes 2 hinges and 8 flat head installation screws. Held in place by 2 nails; used by many wardrobe & door manufacturers. Contents: 2 pull handles; 4 nails. Includes: 2 pull pull handles; 4 brass nails for installation. 7/16" depth. Used by many wardrobe manufacturers. Designed as an adjustable, guide for by-passing doors from 3/4 to 1-3/8 inch thick. Keeps door properly aligned. Needs cardboard shim for proper spacing of 2 side sections. Includes screws.
Johnson 1817PPK3 Bottom Mount Pivot Guide with 2-1/2 in Jamb Bracket Prime Line N6703 Spring Loaded Top Pivot Guide Wheel Prime Line N6705 Spring Loaded Top Pin Door Pivot/Guide
Replaces bottom pivot/jamb bracket pivot used on tap in type hardware. Fits Kenna Frame doors and others. 1/4"W nylon wheel with 3/8"OD x 1"H nylon base self-adjusts up to 9/16"H from base. Fits Alliance doors and others. 5/16"H square nylon guide tip with 3/32"W slot (7/16" inside slot), 1/4"OD pin, and 3/8"OD x 1"H nylon base. Self-adjusts to a minimum 1-7/16"H overall.
PART SLIDING DOOR ZINC PLATED PART SLIDING DOOR TAN         Prime Line N 6501 Round Edge Roller Assembly
SLIDING DOOR PARTS TAN
Our Price: $3.30
Limits sliding action of a sliding door. Absorbs shock. Easy to install. Rubber bumper with steel bracket. Visual-pack. Designed as an adjustable, guide for by-passing doors from 3/4 to 1-3/8 inch thick. Keeps door properly aligned. Needs cardboard shim for proper spacing of 2 side sections. Includes screws. Fits Acme wardrobe doors in top-hung side-mounting applications. Adjustable steel bracket with 1/4"W round edge nylon wheel. For 3/4" to 1-3/8" thick doors. Includes 6 No.8 x 3/4" Phillips pan head screws. N 7030 and N 7031 have nickel plated steel brackets.
Prime Line N 6500 Round Edge Roller Assembly Prime Line N 6761 Adjustable Door Guide Prime Line N6702 Spring Loaded Top Pin Door Pivot/Guide
Fits Acme wardrobe doors in top-hung side-mounting applications. Adjustable steel bracket with 1/4"W round edge nylon wheel. For 3/4" to 1-3/8" thick doors. Includes 6 No.8 x 3/4" Phillips pan head screws. N 7030 and N 7031 have nickel plated steel brackets. Used by many door manufacturers. 2-1/8"L adjustable bottom-mount nylon bracket and nylon spacer guide pins. For 3/4" to 1-3/8" thick bypassing doors. Includes three No.8 x 3/4" Phillips pan head screws. Used by many wardrobe door manufacturers. 3/8"OD x 1"H nylon base and 19/32"OD x 7/16"H nylon cap. Spring-loaded, self-adjusts from 1-7/16"H to 2-1/16"H.
Prime Line N 6539 Wide-Track Slide Guide Prime Line N 6656 Non-Mortise Door Hinge National Hardware MPB141 Recessed Flush Pull 3-1/4 in L x 1-3/8 in W
Fits on Acme doors when opening or closing. Steel springs with nylon retainer. For 1" to 1-3/8" bi-fold doors. 4"L x 3/8"H overall Used by many wardrobe door manufacturers. 1-7/16"H cut out allows for non-mortise installation. 1"W x 3"H overall. Includes 4 flat head installation screws. National Hardware Flush Pull, Recessed, Series: MPB141, Suitable For Use With: Sliding Doors, Pocket Doors and Cabinet Doors, 3-1/4 in Length, 1-3/8 in Width, Steel, Satin Nickel, Includes: Screws
National Hardware V144 Cup Pull Prime Line N 6953 Bi-Fold Guide Roller Assembly Prime Line N6545 Spring Loaded Top Pin Door Pivot
National Hardware Cup Pull, Series: V144, Suitable For Use With: 1/4 in and Larger Size Panels, 1-3/4 in Diameter, 0.34 in Depth, Steel, Chrome 1/4"W nylon wheel on spring-loaded steel shaft with plastic housing that tapers to 3/8" OD to allow for hammering into drilled hole. Self-adjusts from 1-1/2" to 2"H. Fits Acme and Cox doors. Spring-loaded 1/4"OD pin, 7/16"OD x 1-1/2"H steel base, and 3/8"OD x 1/2"H nylon guide cap. For 1" to 1-3/8" thick bi-fold doors up to 50 lbs. each. Includes optional guide cap.
Prime Line N6704 Spring Loaded Top Pivot Guide Wheel Prime Line N 6992 Adjustable Pivot Bracket PART DOOR FLDG NATURAL
Used by many wardrobe manufacturers. Self-adjusting 5/16"W nylon wheel with 3/8"OD x 1"H nylon base. 2-3/32"H maximum. Used by many door manufacturers. Adjustable stamped steel bracket. 2-15/16"L x 1"D x 1-1/4"H overall. Bottom pivot with 7/16" OD stem, nylon base and steel pin that has a 1/2"OD tip with 3/8"W groove. Includes bracket, bottom pivot and 3 installation screws.
Prime Line N 6711 Adjustable Bottom Pin Pivot Bracket Prime Line N 6583 Spring Loaded Top Pin Door Pivot National Hardware V391GR Folding Door Top Roller
Fits on Johnson Hardware doors. Steel bracket with nylon bushing insert to accept pivot pin. 3-1/16"L x 1"W overall. Includes two No.8 x 1-1/4" Phillips pan head screws. Fits Cox doors, 1" to 1-3/8" thick, bi-folding doors up to 30 lbs. each; nylon base. National Hardware Folding Door Top Roller, Series: V391GR, Suitable For Use With: Door Frames, Steel, Plastic, Zinc Plated, BHMA A138.18
PART SLIDE DOOR ANT BRBZ 3/4IN National Hardware V142 Recessed Cup Pull Johnson 1832PPK3 Top Mount Door Pivot Guide
Designed for by-passing, pocket and other sliding doors. 3/4" diameter hole. Works on panels 1/4 inch or larger. Easy installation - no screws required. National Hardware Cup Pull, Recessed, Series: V142, Suitable For Use With: 1/4 in and Larger Size Panels, 3/4 in Diameter, Steel, Brass 3/8" and 7/16" post diameter. Replacement top guide kit fits: Johnson Hardware, Acme, Alliance, Cox, National, Sterling, E-Z Roll.
Prime Line N 6582 Self-Adjusting Guide Wheel Prime Line N 6513 Round Edge Roller Assembly Prime Line N6509 Convex Edge Door Roller Assembly
Nylon base; fits Cox doors. 1/4"W nylon wheel with 7/16"OD x 1-1/2"H nylon base self-adjusts from 1-7/8" to 2-1/2" in track for smooth guiding of lead door. For 1" to 1-3/8" thick bi-fold doors up to 30 lbs. each. Fits Cox wardrobe doors in top-hung side-mounting applications. Offset adjustable steel bracket with 1/4"W round edge nylon wheel. For 3/4" to 1-3/8" thick doors. Includes 3 No.8 x 3/4" Phillips pan head screws. Fits Cox wardrobe doors in top-hung side-mounting applications. Steel offset adjustable bracket with 1/4"W round edge nylon wheel. For 3/4" to 1-3/8" thick by-passing doors up to 50 Lbs. Includes 2 No.8 x 3/4" Phillips pan head screws.
Prime Line N 6755 Door Knob Prime Line N 6512 Round Edge Roller Assembly Prime Line N6508 Convex Edge Door Roller Assembly
For use on hollow core or solid wood bi-fold door panels. 1-3/4"Dia. x 9/16"H. Includes installation screws. Fits Cox wardrobe doors in top-hung side-mounting applications. Offset adjustable steel bracket with 1/4"W round edge nylon wheel. For 3/4" to 1-3/8" thick doors. Includes 3 No.8 x 3/4" Phillips pan head screws. Fits Cox wardrobe doors in top-hung side-mounting applications. Steel offset adjustable bracket with 1/4"W round edge nylon wheel. For 3/4" to 1-3/8" thick by-passing doors up to 50 Lbs. Includes 2 No.8 x 3/4" Phillips pan head screws.
Prime Line N 6544 Self-Adjusting Spring Loaded Guide Wheel Prime Line N6505 Convex Edge Door Roller Assembly Prime Line N6504 Convex Edge Door Roller Assembly
Steel base; fits Acme and Cox doors. 1/4"W nylon wheel with 7/16"OD x 1-1/2"H steel base self-adjusts from 1-7/8" to 2-1/2" in track for smooth guiding of lead door. For 1" to 1-3/8" thick bi-fold doors up to 30 lbs. each. Fits Cox wardrobe doors in top-hung side-mounting applications. Steel offset adjustable bracket with 1/4"W round edge nylon wheel. For 3/4" to 1-3/8" thick by-passing doors up to 50 Lbs. Includes 2 No.8 x 3/4" Phillips pan head screws. Fits Cox wardrobe doors in top-hung side-mounting applications. Steel offset adjustable bracket with 1/4"W round edge nylon wheel. For 3/4" to 1-3/8" thick by-passing doors up to 50 Lbs. Includes 2 No.8 x 3/4" Phillips pan head screws.
National Hardware V141 Recessed Flush Pull 3-1/4 in L x 1-3/8 in W National Hardware V141 Recessed Flush Pull 3-1/4 in L x 1-3/8 in W National Hardware V141 Recessed Flush Pull
335612 V141 FLUSH PULL
Our Price: $3.85
National Hardware Flush Pull, Recessed, Series: V141, Suitable For Use With: Sliding Doors, Pocket Doors and Cabinet Doors, 3-1/4 in Length, 1-3/8 in Width, Steel, Satin Nickel, Includes: Screws National Hardware Flush Pull, Recessed, Series: V141, Suitable For Use With: Sliding Doors, Pocket Doors and Cabinet Doors, 3-1/4 in Length, 1-3/8 in Width, Steel, Antique Bronze, Includes: Screws National Hardware Flush Pull, Recessed, Series: V141, Suitable For Use With: Sliding Doors, Pocket Doors and Cabinet Doors, 3-1/4 in Length, 1-3/8 in Width, 0.37 in Depth, Steel, Brass, Includes: Screws
Prime Line N6637 Top Pivot Pin Prime Line N-6706 Adjustable Bottom Pivot Prime Line N6701 Top Pin Door Pivot/Guide
Top pivot steel pin, with 3/8" O.D. nylon cap, 5/16" diameter, 6 - 3/8" long. Adjustable  pivot with  3/8" diameter nylon base, fits doors of many wardrobe manufacturers. Contents: 2 pivots Fits Johnson doors and others. Spring-loaded top guide and pivot with 7/16"OD x 1-5/16"H nylon base, and 7/16"OD x 1/4"H nylon cap.
Prime Line N 6707 Adjustable Bottom Pin Door Pivot Prime Line N-7203 Finger Pull SLIDING DOOR PARTS 2-1/8IN BRS
Fits Johnson doors and others. 7/16"OD x 1-5/16"H nylon base with 1/4"OD steel tip. Adjustable, 2-5/8" max extension. Held in place by 2 nails; used by many wardrobe & door manufacturers. Contents: 2 pull handles; 4 nails. Includes: 2 pull pull handles; 4 brass nails for installation. 7/16" depth. Used by many wardrobe manufacturers. Use for sliding doors and panels.
PART DOOR FLDG ZINC PLATED    Prime Line N-7209 Cross Finger Pull Prime Line N-7206 Knob Pull Handle
Held in place by 2 nails; used by many wardrobe & door manufacturers. Contents: 2 pull handles; 4 nails. Includes: 2 pull pull handles; 4 brass nails for installation. 7/16" depth. Used by many wardrobe manufacturers. Held in place by 2 nails; used by many wardrobe & door manufacturers. Contents: 2 pull handles; 4 nails. Includes: 2 pull pull handles; 4 brass nails for installation. 7/16" depth. Used by many wardrobe manufacturers.
Prime Line N6840 Flat Edge Sliding Side Mount Door Roller Assembly Prime Line N6841 Flat Edge Sliding Side Mount Door Roller Assembly Prime Line N-6661 Adjustable Floor Mount Guide and Carpet Riser
Fits wardrobe doors. Used by Johnson Hardware in top-hung side-mounting applications. Offset adjustable steel bracket with 1/4"W flat edge nylon wheel. For 3/4" to 1-3/8" thick doors. Includes 3 No.8 x 3/4" Phillips pan head screws. Fits wardrobe doors. Used by Johnson Hardware in top-hung side-mounting applications. Offset adjustable steel bracket with 1/4"W flat edge nylon wheel. For 3/4" to 1-3/8" thick doors. Includes 3 No.8 x 3/4" Phillips pan head screws. Nylon bottom guide tips with steel bracket adjusts for 3/4" to 1-3/8" thick doors, 1/8" plastic shim to raise guide up to 5/8" above carpet. Contents: 1 guide; 5 riser plates; 2 installation screws and 2 plastic anchors.
Prime Line N 6560 Adjustable Door Guide PART SLIDE DOOR STN NKL 3/4IN National Hardware MPB145 Round Cup Pull
Fits on Acme and other doors. 4-5/8"L x 1-1/2"W steel base with white nylon tips. Adjustable bottom bracket. For 3/4" to 1-3/8" thick bypassing doors. Includes two No.8 x 3/4" Phillips pan head screws. Designed for by-passing, pocket and other sliding doors. 3/4" diameter hole. Works on panels 1/4 inch or larger. Easy installation - no screws required. National Hardware Cup Pull, Round, Series: MPB145, Suitable For Use With: 1/4 in and Larger Size Panels, 2-1/8 in Diameter, 3/8 in Depth, Steel, Satin Nickel
PART DOOR FLDG ZINC PLATED    BAR PLASTIC FOLLOWER PLUG     Prime Line N 6668 Round Edge Heavy-Duty Roller Assembly
Adjusts bi-fold doors up or down, left or right. Surface mount for easy installation. Manufactured with cold-rolled steel and nylon. Allows you to remove the cylinder plug from all Schlage pin and tumbler keyed products without losing the top pins and springs during the re-keying process. Fits wardrobe doors. Single round edge nylon wheel; side mounting adjustable steel bracket. For 3/4" to 1-3/8" thick doors up to 90lbs. each. Fits on Atlas. Includes 2 roller assemblies; 4 no. 8x3/4" Phillips pan head sheet metal screws.
Prime Line N 6667 Round Edge Heavy-Duty Roller Assembly Prime Line N 6516 Round Edge Roller Assembly Prime Line N 6517 Round Edge Roller Assembly
Fits wardrobe doors. Single round edge nylon wheel; side mounting adjustable steel bracket. For 3/4" to 1-3/8" thick doors up to 90lbs. each. Fits on Atlas. Includes 2 roller assemblies; 4 no. 8x3/4" Phillips pan head sheet metal screws. Fits wardrobe doors in top-hung side-mounting applications. Offset adjustable steel bracket with 1/4"W round edge nylon ball bearing wheel. For 3/4" to 1-3/8" thick doors. Includes 2 No.6 x 5/8" and 1 No.4 x 3/4" Phillips pan head screws. Fits wardrobe doors in top-hung side-mounting applications. Offset adjustable steel bracket with 1/4"W round edge nylon ball bearing wheel. For 3/4" to 1-3/8" thick doors. Includes 2 No.6 x 5/8" and 1 No.4 x 3/4" Phillips pan head screws.
National Hardware V796 Sliding Door Hanger National Hardware V797 Sliding Door Hanger Prime Line N6612 Top Mount Door Pivot
National Hardware Sliding Door Hanger, Series: V796, Suitable For Use With: Doors Upto 60 lb, 1/4 in Offset, Steel, Plastic, Zinc Plated, BHMA A138.18 National Hardware Sliding Door Hanger, Series: V797, Suitable For Use With: 3/4 - 1-3/8 in Thickness Doors, 1/2 in Offset, Steel, Plastic, Zinc Plated, BHMA A138.18 Top-mount with concealed spring-loaded pin for easy hanging and operating of doors. Steel 3/8"OD pivot and 1/4"OD pin with 1/4"H tip, 1-3/4"H overall. Includes two 1-1/4" nails.
National Hardware V530 Flush/Full Inset Door Hinge Prime Line N 6611 Self-Adjusting Guide Roller Assembly Prime-Line N 7385 Door Knob
National Hardware Door Hinge, Flush/Full Inset, Series: V530, Suitable For Use With: 1 in Think Bi-Fold Doors, Removable Pin, Surface Mounting, 25 lb Load Capacity, 3 in Overall Length, Steel, Brass, For Residential Applications Self-adjusting 1/4"W nylon wheel with steel 3/8"OD base. 1-3/4"H overall. For 1" to 1-3/8" thick bi-fold doors up to 30 lbs. each. Includes two 1-1/4" nails. Wide base prevents hollow door crush, and large diameter allows for easy gripping. 1-11/16" diameter
Prime-Line N 7372 Door Knob Prime Line N6527 Convex Edge Tandem Roller Assembly Prime Line N 6614 Self-Adjusting Spring Loaded Guide Wheel
Wide base prevents hollow door crush, and large diameter allows for easy gripping. 1-11/16" diameter Top hung; offset adjustable bracket. Round edge nylon wheel. Fits 3/4" to 1-3/8" thick doors; fits on Harvey. Contents: 1 roller assembly, 4 no. 8 x 1-1/4" Phillips pan head sheet metal screws. Self-adjusting 1/4"W nylon wheel with 3/8"OD steel base. 1-3/4"H overall. For 1" to 1-3/8" thick bi-fold doors up to 30 lbs. each. Includes two 1-1/4" nails.
Prime-Line N 7283 Bi-Fold Door Repair Kit Schlage SC990B3 Door Pull Johnson 21-3PPK2 Dummy Pocket Door Pull
Repair kit is for 3/8 in. diameter holes. Fits 7/8 in. wide top tracks. Kit includes most parts needed to repair one 2 door set. Fits doors 1-3/8" to 1-1/2" thick. Pre-assembled for doors opening left to right. Plates are reversible for doors opening right to left. Overall size: 2-3/4"H x 2-1/2"D. Johnson Pocket Door Pull, Dummy, Suitable For Use With: 1-3/8 in Door Thickness, 2-1/8 in Diameter, Bright Brass Plated
HANGER DOOR SLIDING           HANGER DOOR SLIDING           PULL EDGE BRASS
EDGE PULLS BRASS
Our Price: $8.99
Nylon wheels require no lubrication. For 3/4" to 1-3/8" thick doors. Cam-action dial permits fingertip adjustments in aligning door to jamb. Nylon wheels require no lubrication. For 3/4" to 1-3/8" thick doors. Cam-action dial permits fingertip adjustments in aligning door to jamb. Designed for all sliding doors. Flush mount. Mounting screws included. Visual-pack.
Schlage SCP990 Reversible Pocket Door Latch Prime Line N 6531 Twin Pocket Roller Assembly Schlage SCP990B-716 Door Pull
Fits doors 1-3/8" to 1-1/2" thick. Pre-assembled for doors opening left to right. Plates are reversible for doors opening right to left. Overall size: 2-3/4"H x 2-1/2"D. Fits wardrobe doors. Tandem, top mounting nylon wheels with adjustable steel bracket. Fits 3/4" to 1-3/4" thick doors, fits on Acme. Fits doors 1-3/8" to 1-1/2" thick. Pre-assembled for doors opening left to right. Plates are reversible for doors opening right to left. Overall size: 2-3/4"H x 2-1/2"D.
Schlage SC990B-619 Door Pull Prime-Line N 7238 Pocket Door Handle and Pull Prime Line N-6771 Pocket Privacy Lock/Pull
Fits doors 1-3/8" to 1-1/2" thick. Pre-assembled for doors opening left to right. Plates are reversible for doors opening right to left. Overall size: 2-3/4"H x 2-1/2"D. Reversible handings with pull-out edge tab. Will fit 1-3/8" thick doors only. Mortise installation. Sliding door lock and pull for passageway (pocket) doors; reversible; adjust from 1-3/8" to 1-3/4" thick doors. Contents: 1 lock and pull; 1 set of installation screws.
Prime-Line N 6773 Pocket Door Privacy Lock With Pull PLUG FOLLOWER                 Prime-Line N 7239 Pocket Door Privacy Lock With Pull
Sliding door combination pull for passageway (pocket) doors; reversible; adjust for 1-3/8" to 1-3/4" door; plates are polished solid brass. Latch engages and disengages by rotating round thumb turn. Use when re-keying Kwikset & Titan locksets; follows cylinder plug during removal to keep top pins and springs in cylinder plug. Mortise latch unit with privacy lock feature, and pull-out edge tab. Reversible; fits 1-3/8" thick doors. Latch engages and disengages by rotating round thumb turn. 1-3/8"W x 2-3/4"H.
Kwikset 83262-001 Re Keying Kit LATCH/PULL POCKET DR ANT BRASS National Hardware Home Designs V1950 Pocket Door Pull
SmartKey Rekeying kit includes a SmartKey learn tool, 4 pre-cut replacement "everyday" keys and 2 pre-cut "temporary" keys. Fits doors from 1-1/4? to 1-5/8? thick. Includes flush pull on edge of door. Manufactured of solid brass for maximum corrosion resistance. Fits doors from 1-1/4? to 1-5/8? thick. Includes flush pull on edge of door. Manufactured of solid brass for maximum corrosion resistance.
National Hardware Home Designs V1950 Pocket Door Pull National Hardware V1950 Pocket Door Pull Schlage SC991 Door Lock
Fits doors from 1-1/4? to 1-5/8? thick. Includes flush pull on edge of door. Manufactured of solid brass for maximum corrosion resistance. National Hardware Pocket Door Pull, Series: V1950, Suitable For Use With: 1-1/4 - 1-5/8 in Thick Doors, Solid Brass, Chrome Plated Fits doors 1-3/8" to 1-1/2" thick. Pre-assembled for doors opening left to right. Plates are reversible for doors opening right to left. Dimensions: 1-1/2" D x 2-1/4" H.
KEY GAUGE STEEL               Schlage SC991B-716 Door Pull Schlage SC991 Door Lock
Designed to measure the key cuts on any Schlage key (Except SFIC) to determine what size pins should go in each chamber of the plug for re-keying purposes. Fits doors 1-3/8" to 1-1/2" thick. Pre-assembled for doors opening left to right. Plates are reversible for doors opening right to left. Dimensions: 1-1/2" D x 2-1/4" H. Fits doors 1-3/8" to 1-1/2" thick. Pre-assembled for doors opening left to right. Plates are reversible for doors opening right to left. Dimensions: 1-1/2" D x 2-1/4" H.
Stanley V1951 Adjustable Economy Pocket Door Latch LATCH/PULL POCKET DR ANT BRASS National Hardware V1951 Pocket Door Latch
Solid brass faceplate. (2-1/2"L x 2-11/16"W). Adjustable for 1-3/8" or 1-3/4" doors, without the need for special screws. Coined edges eliminate bowing of faceplate. Curved zinc die cast finger pull. Inner working construction eliminates jamming of lock. Fits doors 1-3/8" thick. Designed with latching mechanism to lock door. For safety purposes, door can be unlocked using screwdriver. National Hardware Pocket Door Latch, Series: V1951, Suitable For Use With: 1-3/8 in Thickness Doors, Solid Brass, Chrome Plated
Stanley V1951 Adjustable Pocket Door Latch Kwikset Signature 334 Round Reversible Door Lock Kwikset Signature 334 Round Reversible Door Lock
Solid brass faceplate. (2-1/2"L x 2-11/16"W). Adjustable for 1-3/8" or 1-3/4" doors, without the need for special screws. Coined edges eliminate bowing of faceplate. Curved zinc die cast finger pull. Inner working construction eliminates jamming of lock. DOOR PREP: 2-1/8" Face Bore 1" Edge Bore. DOOR THICKNESS: Adjustable for 1-3/8" to 1-3/4". LATCHBOLT: Flat and beveled doors. LATCHBOLT FRONTS: 1" x 2-1/4", round corner steel. HANDING: Non-handed DOOR PREP: 2-1/8" Face Bore 1" Edge Bore. DOOR THICKNESS: Adjustable for 1-3/8" to 1-3/4". LATCHBOLT: Flat and beveled doors. LATCHBOLT FRONTS: 1" x 2-1/4", round corner steel. HANDING: Non-handed
Kwikset Signature 334 Round Reversible Door Lock Kwikset Signature 334 Round Reversible Door Lock Prime-Line N 7274 Pocket Door Mortise Pull
DOOR PREP: 2-1/8" Face Bore 1" Edge Bore. DOOR THICKNESS: Adjustable for 1-3/8" to 1-3/4". LATCHBOLT: Flat and beveled doors. LATCHBOLT FRONTS: 1" x 2-1/4", round corner steel. HANDING: Non-handed DOOR PREP: 2-1/8" Face Bore 1" Edge Bore. DOOR THICKNESS: Adjustable for 1-3/8" to 1-3/4". LATCHBOLT: Flat and beveled doors. LATCHBOLT FRONTS: 1" x 2-1/4", round corner steel. HANDING: Non-handed Used on interior flush mounted doors and panels. Fits a 5/8" x 3-1/2" mortise, 3/4" deep.
LATCH/PULL POCKET DR BRASS    LATCH/PULL POCKET DR ORB      LATCH/PULL POCKET DR STN NKL
Used on pre-drilled pocket doors. Latches but does not lock. Easy installation. Includes fasteners. Used on pre-drilled pocket doors. Latches but does not lock. Easy installation. Includes fasteners. Used on pre-drilled pocket doors. Latches but does not lock. Easy installation. Includes fasteners.
Prime-Line Deluxe Pocket Door Privacy Lock With Pull Kwikset Signature 335 Round Door Lock Kwikset Signature 335 Round Door Lock
Wide easy grip design. Mortise installation. Non handed. Latch engages and disengages by rotating round thumb turn. 1-3/8"W x 3-3/4"H. Thumbturn on inside and flat face on the outside. DOOR PREP: 2-1/8" Face Bore 1" Edge Bore. DOOR THICKNESS: Adjustable for 1-3/8" to 1-3/4". LATCHBOLT: Flat and beveled doors. LATCHBOLT FRONTS: 1" x 2-1/4", round corner steel. HANDING: Non-handed Thumbturn on inside and flat face on the outside. DOOR PREP: 2-1/8" Face Bore 1" Edge Bore. DOOR THICKNESS: Adjustable for 1-3/8" to 1-3/4". LATCHBOLT: Flat and beveled doors. LATCHBOLT FRONTS: 1" x 2-1/4", round corner steel. HANDING: Non-handed
Kwikset Signature 335 Round Door Lock Kwikset Signature 335 Round Door Lock Kwikset Signature 335 Round Door Lock
Thumbturn on inside and flat face on the outside. DOOR PREP: 2-1/8" Face Bore 1" Edge Bore. DOOR THICKNESS: Adjustable for 1-3/8" to 1-3/4". LATCHBOLT: Flat and beveled doors. LATCHBOLT FRONTS: 1" x 2-1/4", round corner steel. HANDING: Non-handed Thumbturn on inside and flat face on the outside. DOOR PREP: 2-1/8" Face Bore 1" Edge Bore. DOOR THICKNESS: Adjustable for 1-3/8" to 1-3/4". LATCHBOLT: Flat and beveled doors. LATCHBOLT FRONTS: 1" x 2-1/4", round corner steel. HANDING: Non-handed Thumbturn on inside and flat face on the outside. DOOR PREP: 2-1/8" Face Bore 1" Edge Bore. DOOR THICKNESS: Adjustable for 1-3/8" to 1-3/4". LATCHBOLT: Flat and beveled doors. LATCHBOLT FRONTS: 1" x 2-1/4", round corner steel. HANDING: Non-handed
Kwikset Signature 335 Round Door Lock Prime-Line N 6710 Bi-Fold Door Top Pivot Bracket Kwikset Signature 334 Round Reversible Door Lock
Thumbturn on inside and flat face on the outside. DOOR PREP: 2-1/8" Face Bore 1" Edge Bore. DOOR THICKNESS: Adjustable for 1-3/8" to 1-3/4". LATCHBOLT: Flat and beveled doors. LATCHBOLT FRONTS: 1" x 2-1/4", round corner steel. HANDING: Non-handed Plastic base; steel track clip; installs into top track to accepts top pivot pin; fits Johnson "new style" Hardware. DOOR PREP: 2-1/8" Face Bore 1" Edge Bore. DOOR THICKNESS: Adjustable for 1-3/8" to 1-3/4". LATCHBOLT: Flat and beveled doors. LATCHBOLT FRONTS: 1" x 2-1/4", round corner steel. HANDING: Non-handed
LATCH/PULL POCKET DR BRASS    LATCH/PULL POCKET DR ORB      LATCH/PULL POCKET DR ANT BRASS
Used on pre-drilled pocket doors. Locks the pocket door. Easy installation. Includes fasteners. Used on pre-drilled pocket doors. Locks the pocket door. Easy installation. Includes fasteners. Used on pre-drilled pocket doors. Locks the pocket door. Easy installation. Includes fasteners.
LATCH/PULL POCKET DR STN NKL  Johnson 15213PK1 Round Pocket Door Latch with Privacy Lock National Hardware Home Designs V1949 Door Edge Pull
Used on pre-drilled pocket doors. Locks the pocket door. Easy installation. Includes fasteners. Lock features automatic latching when closed, simple touch-of-a-button locking with emergency release. Good for converging door systems. Pull is flush with the edge of the door after installation. Easy grip handle. Manufactured of solid brass for maximum corrosion resistance.
Prime-Line N 7368 Pocket Door Privacy Lock TOP PIN STANDARD KEY          KEY BALLS PROTECTO
Deluxe pocket door privacy lock and pull; wide easy grip design; mortise installation; non-handed. Latch engages and disengages by rotating round thumb turn. 2-1/2" wide. Kwikset Top Pin, Regular, Standard, 0.18 in Length Kwikset Key Ball, Steel
LOCK BOTTOM PIN 1             LOCK BOTTOM PIN 2             LOCK BOTTOM PIN 3
Kwikset Lock Bottom Pin, Series: Contemporary Style, NO 1, 0.172 in Length, Gold, For Interior Doors Kwikset Lock Bottom Pin, Series: Contemporary Style, NO 2, 0.195 in Length, Gold, For Interior Doors Kwikset Lock Bottom Pin, Series: Contemporary Style, NO 3, 0.218 in Length, Gold, For Interior Doors
LOCK BOTTOM PIN 4             LOCK BOTTOM PIN 5             LOCK BOTTOM PIN 6
Kwikset Lock Bottom Pin, Series: Contemporary Style, NO 4, 0.241 in Length, Gold, For Interior Doors Kwikset Lock Bottom Pin, Series: Contemporary Style, NO 5, 0.264 in Length, Gold, For Interior Doors Kwikset Lock Bottom Pin, Series: Contemporary Style, NO 6, 0.287 in Length, Gold, For Interior Doors
LOCK MASTER PIN 1             LOCK MASTER PIN 2             LOCK MASTER PIN 3
Cylinder pins. Cylinder pins. Cylinder pins.
LOCK MASTER PIN 4             LOCK MASTER PIN 5             LOCK TOP PIN
Cylinder pins. Cylinder pins. Kwikset Lock Top Pin, 0.16 in Length, Brass
LOCK MASTER PIN 6             LOCK TUMBLER SPRING           MASTER PIN NUM 2 PIN/TMBLR KYD
Cylinder pins. Replacement for Kwikset locks. Designed to be used in the cylinder plug on all Schlage pin and tumbler keyed products that are keyed to a master key system. Designed so that two different keys will open the same lock.
MASTER PIN NUM 3 PIN/TMBLR KYD MASTER PIN NUM 4 PIN/TMBLR KYD MASTER PIN NUM 5 PIN/TMBLR KYD
Designed to be used in the cylinder plug on all Schlage pin and tumbler keyed products that are keyed to a master key system. Designed so that two different keys will open the same lock. Designed to be used in the cylinder plug on all Schlage pin and tumbler keyed products that are keyed to a master key system. Designed so that two different keys will open the same lock. Designed to be used in the cylinder plug on all Schlage pin and tumbler keyed products that are keyed to a master key system. Designed so that two different keys will open the same lock.
MASTER PIN NUM 6 PIN/TMBLR KYD MASTER PIN NUM 7 PIN/TMBLR KYD MASTER PIN NUM 8 PIN/TMBLR KYD
Designed to be used in the cylinder plug on all Schlage pin and tumbler keyed products that are keyed to a master key system. Designed so that two different keys will open the same lock. Designed to be used in the cylinder plug on all Schlage pin and tumbler keyed products that are keyed to a master key system. Designed so that two different keys will open the same lock. Designed to be used in the cylinder plug on all Schlage pin and tumbler keyed products that are keyed to a master key system. Designed so that two different keys will open the same lock.
MASTER PIN NUM 9 PIN/TMBLR KYD KEY PIN BOTTOM PIN TMBLER# 0  KEY PIN BOTTOM PIN TMBLER# 1
Designed to be used in the cylinder plug on all Schlage pin and tumbler keyed products that are keyed to a master key system. Designed so that two different keys will open the same lock. Door hardware parts. Door hardware parts.
KEY PIN BOTTOM PIN TMBLER# 2  KEY PIN BOTTOM PIN TMBLER# 3  KEY PIN BOTTOM PIN TMBLER# 4
Door hardware parts. Door hardware parts. Door hardware parts.
KEY PIN BOTTOM PIN TMBLER# 5  KEY PIN BOTTOM PIN TMBLER# 6  KEY PIN BOTTOM PIN TMBLER# 7
Door hardware parts. Door hardware parts. Door hardware parts.
KEY PIN BOTTOM PIN TMBLER# 8  KEY PIN BOTTOM PIN TMBLER# 9  TUMBLER KEY TOP PIN BB #1PIN
Door hardware parts. Door hardware parts. Designed to be used in the cylinder housing on all Schlage pin and tumbler keyed products. The top pins are designed to be used when master keying or construction keying.  100 pins per pack.
TUMBLER KEY TOP PIN BB #2PIN  PULL CLOSET DOOR BRONZE 2IN   PULL CLOSET DOOR BRONZE 2 1/8
Designed to be used in the cylinder housing on all Schlage pin and tumbler keyed products. The top pins are designed to be used when master keying or construction keying.  100 pins per pack. Plated steel, includes 2 brass nails for installation. Plated steel, includes 2 brass nails for installation.
PULL HNDL BIPASS DR RND 2IN   HINGE BI-FOLD DOOR SNCKL      National Hardware Home Designs V1950 Pocket Door Pull
Plated steel, includes 2 brass nails for installation. Used by many wardrobe door manufacturers. 1-7/16"H cut out allows for non-mortise installation. 1"W x 3"H overall. Includes 4 flat head installation screws. Fits doors from 1-1/4? to 1-5/8? thick. Includes flush pull on edge of door. Manufactured of solid brass for maximum corrosion resistance.
BALL BEARINGS                 Stanley V1951 Adjustable Economy Pocket Door Latch Johnson 2610F721 Sliding Door Hardware
Ball bearing const cores. Pack of 1,000. Solid brass faceplate. (2-1/2"L x 2-11/16"W). Adjustable for 1-3/8" or 1-3/4" doors, without the need for special screws. Coined edges eliminate bowing of faceplate. Curved zinc die cast finger pull. Inner working construction eliminates jamming of lock. For doors 1-1/8" to 1-3/4" thickness, weighing up to 125 pounds. Extruded aluminum fascia track, 14-16 gauge zinc dichromate plated steel parts. Track can be cut down to fit any smaller size openings. Set contents: (1) 2610F track length, (2) 1120 hangers, (1) 12 door guide, (2) 1155 track stops, (1) 1712 wrench.
RETAINER CAP REMOVAL TOOL     Schlage 40-134 Small Re Keying Kit Schlage 40-132 Retail Keying Kit
Designed to all you to remove the rear cap from Schlage deadbolt pin and tumbler cylinders. It allows you to unscrew the cap and depresses the pin which allows removal in one step. Each end is a different size for the appropriate deadbolt cap size. Keying kit snap-tight plastic box. Bottom pins, top pins, pin springs, cylinder caps, cap, pins, key gauge and follower bar. Includes bottom pins, top pins, pin springs, cylinder caps, cap springs and pins, B-series cylinder bars, key gauge, follower bar, cap removal tool and retaining rings. Packed in a seal-tight metal box.
Kwikset 92720-001 Keying Kit
No.272 kit for rekeying Kwikset locks. Kit includes master pins, plug clip, knob set, springs, deadbolt locking bar, pin cover, PK balls, key step gauge, depth key, top pin, cylinder removing tool, plug following tool, rekeying tool, bottom pins, anti-pick pins for 980 deadbolts. Packed in a heavy-duty metal case.
   
 
1