Home > HARDWARE > WINDOW & DOOR HARDWARE > FOLDING DOORS/HARDWARE > BIFOLD DOOR HARDWARE SETS
Sort By:
1
DOOR KEY EMERGENCY            National Hardware MPB142 Recessed Cup Pull National Hardware MPB142 Cup Pull
For use in Kwikset-brand interior/privacy locksets; conveniently stores above door for ease of use. National Hardware Cup Pull, Recessed, Series: MPB142, Suitable For Use With: 1/4 in and Larger Size Panels, 3/4 in Diameter, Steel, Brass National Hardware Cup Pull, Series: MPB142, Suitable For Use With: 1/4 in and Larger Size Panels, 3/4 in Diameter, Steel, Satin Nickel
National Hardware MPB142 Cup Pull Prime Line N 6567 Door Guide PART SLIDING DOOR BRS 1-3/4IN
National Hardware Cup Pull, Series: MPB142, Suitable For Use With: 1/4 in and Larger Size Panels, 3/4 in Diameter, Steel, Antique Bronze One pair fits any thickness single door; install a series of pairs for multiple doors. Includes one pair of 1"H nylon guides and four No.8 x 3/4" Phillips pan head screws. Designed for by-passing, pocket and other sliding doors. Works on panels 1/4 inch or larger. Bagged.
Prime Line N 6562 Floor Mount Door Guide GUIDE BI-PASSDR NYLN/STL      Prime Line N 6563 Door Guide
Used by many door manufacturers. 2-7/8"L adjustable bottom-mount nylon bracket and nylon spacer guide pins. For 3/4" to 1-3/8" thick bypassing doors. Includes three No.8 x 3/4" Phillips pan head screws. Steel base with nylon guide tips. Adjustment for either 1-3/8" thick doors or 3/4" thick. Designed for use with N-6795 carpet riser. Used by Johnson Hardware. 4-3/16"L x 1"W nylon guide with 1-3/8" between each spacer. For 1-3/8" thick bypassing doors. Includes two No.8 x 3/4" Phillips pan head screws.
Prime Line N-6893 Finger Pull Prime Line N-6765 Round Lever Pull Handle Kwikset 81467 Lock Cylinder Remover
Plated steel, universal design fits a 3/4" diameter hole. Held in place by 2 nails; used by many wardrobe & door manufacturers. Contents: 2 pull handles; 4 nails. Includes: 2 pull pull handles; 4 brass nails for installation. 7/16" depth. Used by many wardrobe manufacturers. Commonly referred to as "Pickle Fork." Use for servicing cylinders.
Prime Line N-6846 Finger Pull Prime Line B629 Flat Edge Sliding Door Roller Assembly Johnson 2135PPK1 Door Guide
Plated steel, universal design fits a 3/4" diameter hole. Used on Croft and Keller sliding screen doors. 1/4"W x 3/8"Dia flat nylon ball bearing wheel with 3/8" threaded hex hub. Includes 2 rollers and 2 fasteners. One piece metal guide plate. Pivoting nylon guide posts stays  parallel to the door preventing door binding. 3/4" or 1-3/8" adjustable for slight door thickness variations.
National Hardware V144 Recessed Cup Pull National Hardware V145 Recessed Cup Pull National Hardware V145 Cup Pull
National Hardware Cup Pull, Recessed, Series: V144, Suitable For Use With: 1/4 in and Larger Size Panels, 1-3/4 in Diameter, 0.34 in Depth, Steel, Brass, Includes: Nails National Hardware Cup Pull, Recessed, Series: V145, Suitable For Use With: 1/4 in and Larger Size Panels, 2-1/8 in Diameter, Steel, Brass, Includes: Nails National Hardware Cup Pull, Series: V145, Suitable For Use With: 1/4 in and Larger Size Panels, 2-1/8 in Diameter, Steel, Antique Bronze
National Hardware V145 Cup Pull Prime Line B551 Bottom Mount Sliding Door Roller Assembly Schlage SPS221B-605/SP221 Round Door Pull
National Hardware Cup Pull, Series: V145, Suitable For Use With: 1/4 in and Larger Size Panels, 2-1/8 in Diameter, Steel, Satin Nickel Plastic roller with narrow center groove 7/32"W nylon wheel, concave edge. Includes a 8-32 x 3/8" machine screw with binder post nut. Fits on Air Control doors. 2-1/8" Diameter hole - slim pak -polybagged.
Prime Line E 2282 Door Knob Rosette Prime Line B 521 Concave Edge Spring Tension Roller Assembly Prime Line B 512 Concave Edge Spring Tension Roller Assembly
Screw mounted on door. 2-1/4" diameter. Used on old style passage locks. Includes 2 rosettes and installation screws. 1/4"W center groove nylon wheel, high tension 2-1/2"L heat-treated steel spring, and No.8 x 3/8" Phillips pan head sheet metal screw. Consists of 1/4"W center groove wheel, Heat treated, high tension adjustable steel M-spring. Used by several patio door manufacturers.
Prime Line B 609 Concave Edge Spring Tension Roller Assembly Prime Line N 6761 Adjustable Door Guide PART SLIDING DOOR ZINC PLATED
Bent spring design used by Academy Mfg. and others. Center grooved 5/16"W wheel, 2-1/4"L x 5/16"W flat high-tension heat-treated steel spring, and No.8 x 3/8" Phillips sheet metal screw. Used by many door manufacturers. 2-1/8"L adjustable bottom-mount nylon bracket and nylon spacer guide pins. For 3/4" to 1-3/8" thick bypassing doors. Includes three No.8 x 3/4" Phillips pan head screws. Limits sliding action of a sliding door. Absorbs shock. Easy to install. Rubber bumper with steel bracket. Visual-pack.
PART SLIDING DOOR TAN         Prime Line B 638 Concave Edge Spring Tension Roller Assembly Prime Line A 111 Door Latch/Pull
SLIDING DOOR PARTS TAN
Our Price: $3.47
Designed as an adjustable, guide for by-passing doors from 3/4 to 1-3/8 inch thick. Keeps door properly aligned. Needs cardboard shim for proper spacing of 2 side sections. Includes screws. Used by Metal Industries. Center grooved, 1/4"W, roller. 1-3/4"L, high-tension, heat-treated steel spring. Includes No.8 x 3/8" Phillips sheet metal screw. Non-handed, surface mount, economy pulls, plastic assembly. Contents: 1 black inside pull, 1 black outside pull, #4 8x3/8" Phillips flat head sheet metal screws. 1-7/8"W x 4"H.
Prime Line A 127 Door Latch Prime Line N 6501 Round Edge Roller Assembly Prime Line N 6500 Round Edge Roller Assembly
Used by several patio door manufacturers. Screw slots allow for vertical adjustments. 7/32"W x 1-3/16"H (not including strike hook). Includes 2 diecast strikes and installation screws. Fits Acme wardrobe doors in top-hung side-mounting applications. Adjustable steel bracket with 1/4"W round edge nylon wheel. For 3/4" to 1-3/8" thick doors. Includes 6 No.8 x 3/4" Phillips pan head screws. N 7030 and N 7031 have nickel plated steel brackets. Fits Acme wardrobe doors in top-hung side-mounting applications. Adjustable steel bracket with 1/4"W round edge nylon wheel. For 3/4" to 1-3/8" thick doors. Includes 6 No.8 x 3/4" Phillips pan head screws. N 7030 and N 7031 have nickel plated steel brackets.
National Hardware MPB141 Recessed Flush Pull 3-1/4 in L x 1-3/8 in W National Hardware V144 Cup Pull Prime Line B570 Sliding Spring Tension Door Roller Assembly
National Hardware Flush Pull, Recessed, Series: MPB141, Suitable For Use With: Sliding Doors, Pocket Doors and Cabinet Doors, 3-1/4 in Length, 1-3/8 in Width, Steel, Satin Nickel, Includes: Screws National Hardware Cup Pull, Series: V144, Suitable For Use With: 1/4 in and Larger Size Panels, 1-3/4 in Diameter, 0.34 in Depth, Steel, Chrome Used by several patio door manufacturers. Consists of 1/4"W center groove wheel, high-tension heat-treated steel v-spring (2"L before and 2"L after bend).
PART SLIDE DOOR ANT BRBZ 3/4IN National Hardware V142 Recessed Cup Pull Prime Line N-7206 Knob Pull Handle
Designed for by-passing, pocket and other sliding doors. 3/4" diameter hole. Works on panels 1/4 inch or larger. Easy installation - no screws required. National Hardware Cup Pull, Recessed, Series: V142, Suitable For Use With: 1/4 in and Larger Size Panels, 3/4 in Diameter, Steel, Brass Held in place by 2 nails; used by many wardrobe & door manufacturers. Contents: 2 pull handles; 4 nails. Includes: 2 pull pull handles; 4 brass nails for installation. 7/16" depth. Used by many wardrobe manufacturers.
National Hardware V141 Recessed Flush Pull 3-1/4 in L x 1-3/8 in W National Hardware V141 Recessed Flush Pull 3-1/4 in L x 1-3/8 in W National Hardware V141 Recessed Flush Pull
335612 V141 FLUSH PULL
Our Price: $4.06
National Hardware Flush Pull, Recessed, Series: V141, Suitable For Use With: Sliding Doors, Pocket Doors and Cabinet Doors, 3-1/4 in Length, 1-3/8 in Width, Steel, Satin Nickel, Includes: Screws National Hardware Flush Pull, Recessed, Series: V141, Suitable For Use With: Sliding Doors, Pocket Doors and Cabinet Doors, 3-1/4 in Length, 1-3/8 in Width, Steel, Antique Bronze, Includes: Screws National Hardware Flush Pull, Recessed, Series: V141, Suitable For Use With: Sliding Doors, Pocket Doors and Cabinet Doors, 3-1/4 in Length, 1-3/8 in Width, 0.37 in Depth, Steel, Brass, Includes: Screws
Prime Line N-7209 Cross Finger Pull Prime Line B515 Sliding Spring Tension Door Roller Assembly Prime Line N-6706 Adjustable Bottom Pivot
Held in place by 2 nails; used by many wardrobe & door manufacturers. Contents: 2 pull handles; 4 nails. Includes: 2 pull pull handles; 4 brass nails for installation. 7/16" depth. Used by many wardrobe manufacturers. Used as top and bottom roller by several patio door manufacturers. Consists of 1/4"W center groove nylon wheel, 2"L x 3/8"W steel housing, high-tension heat-treated steel spring. Adjustable  pivot with  3/8" diameter nylon base, fits doors of many wardrobe manufacturers. Contents: 2 pivots
SLIDING DOOR PARTS 2-1/8IN BRS Prime Line N6505 Convex Edge Door Roller Assembly Prime Line N6504 Convex Edge Door Roller Assembly
Use for sliding doors and panels. Fits Cox wardrobe doors in top-hung side-mounting applications. Steel offset adjustable bracket with 1/4"W round edge nylon wheel. For 3/4" to 1-3/8" thick by-passing doors up to 50 Lbs. Includes 2 No.8 x 3/4" Phillips pan head screws. Fits Cox wardrobe doors in top-hung side-mounting applications. Steel offset adjustable bracket with 1/4"W round edge nylon wheel. For 3/4" to 1-3/8" thick by-passing doors up to 50 Lbs. Includes 2 No.8 x 3/4" Phillips pan head screws.
Prime Line N-6661 Adjustable Floor Mount Guide and Carpet Riser Prime Line B 649 Concave Edge Spring Tension Roller Assembly Prime Line N6508 Convex Edge Door Roller Assembly
Nylon bottom guide tips with steel bracket adjusts for 3/4" to 1-3/8" thick doors, 1/8" plastic shim to raise guide up to 5/8" above carpet. Contents: 1 guide; 5 riser plates; 2 installation screws and 2 plastic anchors. Plastic center grooved wheel with steel housing, high-tension steel spring. Fits on Columbia Uni-fit doors. Contents: 2 roller assemblies. Fits Cox wardrobe doors in top-hung side-mounting applications. Steel offset adjustable bracket with 1/4"W round edge nylon wheel. For 3/4" to 1-3/8" thick by-passing doors up to 50 Lbs. Includes 2 No.8 x 3/4" Phillips pan head screws.
Prime Line N6509 Convex Edge Door Roller Assembly Prime Line N 6512 Round Edge Roller Assembly Prime Line N 6513 Round Edge Roller Assembly
Fits Cox wardrobe doors in top-hung side-mounting applications. Steel offset adjustable bracket with 1/4"W round edge nylon wheel. For 3/4" to 1-3/8" thick by-passing doors up to 50 Lbs. Includes 2 No.8 x 3/4" Phillips pan head screws. Fits Cox wardrobe doors in top-hung side-mounting applications. Offset adjustable steel bracket with 1/4"W round edge nylon wheel. For 3/4" to 1-3/8" thick doors. Includes 3 No.8 x 3/4" Phillips pan head screws. Fits Cox wardrobe doors in top-hung side-mounting applications. Offset adjustable steel bracket with 1/4"W round edge nylon wheel. For 3/4" to 1-3/8" thick doors. Includes 3 No.8 x 3/4" Phillips pan head screws.
Prime Line N-7203 Finger Pull PART SLIDE DOOR STN NKL 3/4IN National Hardware MPB145 Round Cup Pull
Held in place by 2 nails; used by many wardrobe & door manufacturers. Contents: 2 pull handles; 4 nails. Includes: 2 pull pull handles; 4 brass nails for installation. 7/16" depth. Used by many wardrobe manufacturers. Designed for by-passing, pocket and other sliding doors. 3/4" diameter hole. Works on panels 1/4 inch or larger. Easy installation - no screws required. National Hardware Cup Pull, Round, Series: MPB145, Suitable For Use With: 1/4 in and Larger Size Panels, 2-1/8 in Diameter, 3/8 in Depth, Steel, Satin Nickel
Prime Line B513 Sliding Spring Tension Door Roller Assembly Prime Line B518 Sliding Screen Tension Door Roller Assembly Prime Line N6840 Flat Edge Sliding Side Mount Door Roller Assembly
Consists of 1/4"W center groove wheel, Heat treated, high tension adjustable steel M-spring. Used by several patio door manufacturers. Used as top and bottom roller. Plastic wheel with center groove. 1-7/8"L housing, heat treated, high tension steel spring, and No.8-32 x 1-1/4" Phillips pan head screw. Fits wardrobe doors. Used by Johnson Hardware in top-hung side-mounting applications. Offset adjustable steel bracket with 1/4"W flat edge nylon wheel. For 3/4" to 1-3/8" thick doors. Includes 3 No.8 x 3/4" Phillips pan head screws.
Prime Line N 6560 Adjustable Door Guide Prime Line N6841 Flat Edge Sliding Side Mount Door Roller Assembly Prime Line N 6668 Round Edge Heavy-Duty Roller Assembly
Fits on Acme and other doors. 4-5/8"L x 1-1/2"W steel base with white nylon tips. Adjustable bottom bracket. For 3/4" to 1-3/8" thick bypassing doors. Includes two No.8 x 3/4" Phillips pan head screws. Fits wardrobe doors. Used by Johnson Hardware in top-hung side-mounting applications. Offset adjustable steel bracket with 1/4"W flat edge nylon wheel. For 3/4" to 1-3/8" thick doors. Includes 3 No.8 x 3/4" Phillips pan head screws. Fits wardrobe doors. Single round edge nylon wheel; side mounting adjustable steel bracket. For 3/4" to 1-3/8" thick doors up to 90lbs. each. Fits on Atlas. Includes 2 roller assemblies; 4 no. 8x3/4" Phillips pan head sheet metal screws.
Prime Line N 6667 Round Edge Heavy-Duty Roller Assembly National Hardware V796 Sliding Door Hanger National Hardware V797 Sliding Door Hanger
Fits wardrobe doors. Single round edge nylon wheel; side mounting adjustable steel bracket. For 3/4" to 1-3/8" thick doors up to 90lbs. each. Fits on Atlas. Includes 2 roller assemblies; 4 no. 8x3/4" Phillips pan head sheet metal screws. National Hardware Sliding Door Hanger, Series: V796, Suitable For Use With: Doors Upto 60 lb, 1/4 in Offset, Steel, Plastic, Zinc Plated, BHMA A138.18 National Hardware Sliding Door Hanger, Series: V797, Suitable For Use With: 3/4 - 1-3/8 in Thickness Doors, 1/2 in Offset, Steel, Plastic, Zinc Plated, BHMA A138.18
Prime Line N 6516 Round Edge Roller Assembly Prime Line N 6517 Round Edge Roller Assembly Prime Line B 639 Concave Edge Spring Tension Roller Assembly
Fits wardrobe doors in top-hung side-mounting applications. Offset adjustable steel bracket with 1/4"W round edge nylon ball bearing wheel. For 3/4" to 1-3/8" thick doors. Includes 2 No.6 x 5/8" and 1 No.4 x 3/4" Phillips pan head screws. Fits wardrobe doors in top-hung side-mounting applications. Offset adjustable steel bracket with 1/4"W round edge nylon ball bearing wheel. For 3/4" to 1-3/8" thick doors. Includes 2 No.6 x 5/8" and 1 No.4 x 3/4" Phillips pan head screws. Used by Metal Industries. Center grooved, 1/4"W, roller. 1-3/4"L, high-tension, heat-treated steel spring. Includes No.8 x 3/8" Phillips sheet metal screw.
Prime Line A 150 Cross Latch and Pull Prime Line A 142 Cross Latch and Pull Prime-Line B 705 Bug Seal
Used by several door manufacturers for non-handed mortise installations. Sliding activator button designed for Jim Walters sliding roll-formed screen door. Includes black plastic inside pull and latch activator, black plastic outside pull, steel latch and installation screws. 2"W x 4"H handles. Non-handed; mortise installation; used by several door manufacturers. Includes 1 plastic inside and outside pull, 1 steel latch assembly, 1 plastic activator, 1 pop rivet, and installation screws. Flap has tear strips to adjust width from 3/4" to 1-3/8". Flexible, seals against insects.
Prime Line D1503 Concave Edge Sliding Door Roller Hampton V1195 Reversible Door Latch Prime Line N6527 Convex Edge Tandem Roller Assembly
Contents: 2 rollers Steel ball bearing roller, steel inner race with 1/4" hole, center grooved. Flush mount fits into door stile. 1/16" projection inside/outside of patio door. Reversible for right or left hand application. Packed with 4 different latch hooks to fit virtually all applications. For 1" to 1-1/4" thick doors. 6-1/2" distance between attaching screws. Top hung; offset adjustable bracket. Round edge nylon wheel. Fits 3/4" to 1-3/8" thick doors; fits on Harvey. Contents: 1 roller assembly, 4 no. 8 x 1-1/4" Phillips pan head sheet metal screws.
Prime Line D1723 Concave Edge Sliding Door Roller Assembly Prime Line D 1563 Concave Edge Roller Assembly Prime Line D 1502 Concave Edge Center Grooved Roller Assembly
Used by many patio door manufacturers. Steel ball bearing roller in adjustable 2-5/8"L x 1-3/8"H x 3/4"D steel housing with 10-32 machine thread hole on top center and 1/4-20 side threads for mounting. Used by Air Control, Howmet, Krestmark and many other patio door manufacturers. Steel ball bearing roller and adjustable 2-5/8"L x 1-3/8"H x 3/4"D steel housing assembly with machine threaded holes (10-32 top and 1/4-20 side) for installation. For sliding glass doors. Center grooved, 5/16"W steel ball bearing roller and steel inner race with 1/4"-20 x 3/4" carriage bolt and 1/4"-20 hex nut.
HANGER DOOR SLIDING           HANGER DOOR SLIDING           Prime Line D1688 Concave Edge Sliding Door Roller Assembly
Nylon wheels require no lubrication. For 3/4" to 1-3/8" thick doors. Cam-action dial permits fingertip adjustments in aligning door to jamb. Nylon wheels require no lubrication. For 3/4" to 1-3/8" thick doors. Cam-action dial permits fingertip adjustments in aligning door to jamb. Steel ball bearing roller and adjustable steel housing assembly. Fits on Nu-Air, Bennings, Scotty and many other patio door manufacturers.
PULL EDGE BRASS               Prime Line D 1831 Concave Edge Roller Assembly Prime Line N 6531 Twin Pocket Roller Assembly
EDGE PULLS BRASS
Our Price: $9.46
Designed for all sliding doors. Flush mount. Mounting screws included. Visual-pack. Steel ball bearing roller; adjustable steel housing assembly; used by many patio door manufacturers. Housing dimensions: 2-5/8" length, 1-1/8" height, and 3/4" width. 10-32 machine thread on top and 1/4-20 machine thread on end of housing. Fits wardrobe doors. Tandem, top mounting nylon wheels with adjustable steel bracket. Fits 3/4" to 1-3/4" thick doors, fits on Acme.
Prime Line E-2000 Cylinder Lock Hampton V1147H Inside Door Handle Prime Line C 1190 Door Pull
Cylinder Lock, 1-1/4", 5 pin tumbler lock with 2 keys; hardened break-away tailpiece. Used to keylock most surface mount handle sets. Keyway is Compatible To: Weiser, Kwikset & Weslock. Designed for use with model V1195 latch set. Oak handle and screws included. 6-1/2" distance between attaching screws. Black diecast supports w/wood handle. Mounting posts come finished in black colored paint, and the wooden pull handle comes finished in a clear finish. Can be installed on doors with mounting hole centers ranging from 6-1/2? to 6-5/8? center-2-center. Surface mounted. Features a sturdy metal backer support behind the wood. Note: Color of wood may vary per shipment.
Schlage 335F3 Triple Pole Roller Catch Prime Line B 684 Concave Edge Center Grooved Roller Assembly PLUG FOLLOWER
Easy to install on thin doors. Smooth, positive latching action insured by powerful conical spring. Durable nylon roller for quiet operation. Adjustable tension. Full lip style strike for simplified mortising. 3/4" x 1-3/4" bore, 2-1/4" x 1-5/8" strike, 2-1/4" x 7/8" face plate, 1-3/16" CTC. Packed with sheet metal screws. Polybagged. Nylon outer housing, aluminum inner housing with center grooved nylon wheel with adjustment cam. Contents: 2 roller assemblies, installation screws. Use when re-keying Kwikset & Titan locksets; follows cylinder plug during removal to keep top pins and springs in cylinder plug.
Prime Line D 1607 Concave Edge Adjustable Roller Assembly Prime Line E 2014 Mortise Lock Prime Line D1808 Concave Edge Sliding Door Roller Assembly
2-roller tandem design. 6-1/4"L x 1-3/16"H x 11/16"D adjustable steel housing with 2 steel ball bearing rollers. Steel housing and hook, round end face plate. Hook position is adjustable, fits on W&F. Hole Center: 3-11/16". Tandem steel ball bearing roller; adjustable; steel housing assembly. Housing Width: 3/4". Roller Edge Type: Concave. Contents: 1 roller assembly
Prime Line C 1043 Door Handle Set Kwikset 83262-001 Re Keying Kit Prime Line E-2164 Mortise Lock
Fits all popular flush lock punch-outs for 1" thick doors. 3/4" x 2-3/4", universal design, die-cast, chrome finish keeper No.E-2040 adjusts vertically. Includes 7-1/4"L x 7/8"W inside and outside pulls, latch on inside pull, keeper, installation fasteners, and 4 assorted hooks (3/8", 3/4", 1/2", and 5/8"). 6-5/8" installation hole spacing. SmartKey Rekeying kit includes a SmartKey learn tool, 4 pre-cut replacement "everyday" keys and 2 pre-cut "temporary" keys. Mortise Lock for Sliding Patio Doors, 45 degree lever slot. Adaptor faceplate allows for use on wood and vinyl patio doors. 4-5/8" hole center (hole to hole). 45 degree keyway.
National Hardware V771D By-Pass Door Hardware Set National Hardware 391S Folding Door Hardware Set Kwikset 293 3CP Round Trim Rosette
National Hardware Door Hardware Set, By-Pass, Series: V771D, 60 lb Safe Working Load, 48 in Size, Suitable For Use With: 3/4 - 1-3/8 in Thickness Doors, Steel With Nylon, Galvanized, BHMA A138.18 National Hardware Folding Door Hardware Set, Series: 391S, 36 in, Surface Mount, 30 lb Safe Load, Suitable For Use With: 7/8 - 1-3/8 in Thickness Bi-Fold Doors, Steel, White 3-13/16" diameter. For 2-3/8" or 2-3/4" backset.
ROLLER SLDG DR BRS STL BEARING Hampton VK1195 Door Lockset PULL HNDL BIPASS DR RND 2IN
1-1/4" tandem steel ball bearing rollers; adjustable steel housing; dimensions: thickness, 11/16"; length, 3-1/8"; height, 1-1/32". Roller edge type: Concave. 2 tandem wheels in roller assembly, Flush mount fits into door stile. Projection 1/16" on inside and outside of patio door. Reversible for right or left hand application. Packed with four different latch hooks to fit virtually all applications. Key lock for extra security. For 1" to 1-1/4" thick doors. 6-1/2" distance between attaching screws. Plated steel, includes 2 brass nails for installation.
National Hardware V770D By-Pass Door Hardware Set National Hardware V771D By-Pass Door Hardware Set Hampton VK1104 Locking Reversible Door Handle
National Hardware Door Hardware Set, By-Pass, Series: V770D, 60 lb Safe Working Load, 48 in Size, Includes: 770 Rail, 192 Adjustable By-Passing Door Guide, 790/791 Dial Action Hangers and Screws, Steel With Nylon, Galvanized, BHMA A138.18 National Hardware Door Hardware Set, By-Pass, Series: V771D, 60 lb Safe Working Load, 60 in Size, Suitable For Use With: 3/4 - 1-3/8 in Thickness Doors, Steel With Nylon, Galvanized, BHMA A138.18 Internal latching, reversible for right or left hand application. Key lock for extra security. Oak handle. 3-15/16" installation hole spacing. For aluminum doors 1? to 1-1/4? thick?.
Johnson 2200 By-Pass Door Hardware Set Hampton V1104 Reversible Door Latch HARDWARE SLIDING DOOR GLV 60IN
For doors 3/4" or 1-3/8" thick, weighing up to 50 pounds. Track can be cut down to fit any smaller openings. Set contents: (1) 2200 track length, (2) 2238 hangers, (2) 2216 hangers, (1) 2135 door guide and (2) 15 pulls. For aluminum doors 1? to 1-1/4? thick. Internal latching, reversible for right or left hand application. Oak handle. 3-15/16" installation hole spacing. Doors cannot accidentally jump the track. Wheels never need lubrication. Doors can be hung or removed without detaching hangers. Door guide provides smooth operation and allows up or down adjustment of doors. Dial-action hanger allows easy vertical adjustment. Safe working load: 60 lbs.
Johnson 1700 Door Hardware Set National Hardware V771D By-Pass Door Hardware Set Johnson 2200F By-Pass Fascia Door Hardware Set
For doors up to 18" x 96" x 1-3/4", weighing 40 pounds. Automatic top of door spacing eliminates gaps. Steel track with positive pivot lock. Surface mounted pivots and guides (no hole drilling). Four way adjustable bottom pivot bracket and shock absorbing hinges. 14-16 gauge zinc dichromate plated steel parts. Includes all hardware to make 2 or 4 door panels fold. Tracks can be cut to fit smaller door/opening widths. Set Content: (1) 1700 track length, (2) 1701 top pivot lock, (2) 1701 top pivot, (2) 1705 door guide, (2) 1713 track stop, (6) 1703 hinges, (2) 1706 bottom pivot, (2) 1711 pivot bracket, (1) 1808 door aligner, (2) 33 door knob, and (1) 1712 wrench. National Hardware Door Hardware Set, By-Pass, Series: V771D, 60 lb Safe Working Load, 72 in Size, Suitable For Use With: 3/4 - 1-3/8 in Thickness Doors, Steel With Nylon, Galvanized, BHMA A138.18 For doors 1-3/8" thick, weighing up to 50 pounds. Aluminum fascia track. Convex track rails provide one point contact between wheel and track. Hangers includes: 7/8" diameter molded nylon machine turned wheel with three point locking plate. Adjustable hangers and door guide. Nylon 1" high guide posts and swivel. 14-16 gauge zinc dichromate plated steel parts. Set contents: (1) 2200F track; (4) 2238 hangers; (1) 2135 door guide and (2) 15 pulls.
HANDLE INTERNAL DOOR WOOD     Johnson 2200 By-Pass Door Hardware Set Johnson 2200 By-Pass Door Hardware Set
Hook style latch, designed to fit 90% of all internally latched doors; reversible right or left hand openings; complete with keeper; locking unit with key; automatic unlatching options prevents accidental lockout. For doors 3/4" or 1-3/8" thick, weighing up to 50 pounds. Track can be cut down to fit any smaller openings. Set contents: (1) 2200 track length, (2) 2238 hangers, (2) 2216 hangers, (1) 2135 door guide and (2) 15 pulls. For doors 3/4" or 1-3/8" thick, weighing up to 50 pounds. Track can be cut down to fit any smaller openings. Set contents: (1) 2200 track length, (2) 2238 hangers, (2) 2216 hangers, (1) 2135 door guide and (2) 15 pulls.
HANDLE SLIDING DOOR BLK AL    Prime Line C-1018 Internal Lock Lever Handle Set Prime Line C 1107 Sliding Door Lock
Extruded aluminum inside pull; clamp-latch with metal activator; diecast outside pull has knock-out for converting to keyed cylinder lock; latch hook profile is 1/4", projection is 1/2"; used by many patio door manufacturers. Designed to fit 90 percent of all internally latched doors including Viking. Reversible for right or left hand openings. Automatic unlatching option to prevent accidental lockouts. No.E-2054 stamped steel sliding-glass-door keeper allows for vertical adjustments. Stained solid wood handle, all other parts of finished die-cast aluminum. Includes inside pull and latch, outside pull, keeper, and installation fasteners. For 1" thick door rails. Designed to fit 90 percent of all internally latched doors including Viking. Reversible for right or left hand openings. Automatic unlatching option to prevent accidental lockouts. No.E-2054 stamped steel sliding-glass-door keeper allows for vertical adjustments. Stained solid wood handle, all other parts of finished die-cast aluminum. Includes inside pull and latch, outside pull, keeper, and installation fasteners. For 1" thick door rails.
LOCK SLDG DR STL PLTD         National Hardware 391D Folding Door Hardware Set Prime Line C-1095 Internal Lock Lever Handle Set
Steel mortise latch designed for wood stiles; adjustable bolt throw; Vertical keyway, round faceplate, slanted housing corners. 1,000 pound strength. National Hardware Folding Door Hardware Set, Series: 391D, 48 in, Surface Mount, 30 lb Safe Load, Suitable For Use With: 7/8 - 1-3/8 in Thickness Bi-Fold Doors, Steel, White Internally latched, reversible for right or left hand openings. Secondary night lock feature prevents external latch operation for added security. Automatic unlatching option to prevent accidental lockouts. No.E-2054 stamped-steel, sliding-glass-door keeper allows for vertical adjustments. Stained solid wood handle, all other parts of finished die-cast. Includes inside wood pull and latch, outside pull, keeper, and installation fasteners. For 1" thick door rails.
Johnson 2200F By-Pass Fascia Door Hardware Set TOP PIN STANDARD KEY          KEY BALLS PROTECTO
For doors 1-3/8" thick, weighing up to 50 pounds. Aluminum fascia track. Convex track rails provide one point contact between wheel and track. Hangers includes: 7/8" diameter molded nylon machine turned wheel with three point locking plate. Adjustable hangers and door guide. Nylon 1" high guide posts and swivel. 14-16 gauge zinc dichromate plated steel parts. Set contents: (1) 2200F track; (4) 2238 hangers; (1) 2135 door guide and (2) 15 pulls. Kwikset Top Pin, Regular, Standard, 0.18 in Length Kwikset Key Ball, Steel
LOCK BOTTOM PIN 1             LOCK BOTTOM PIN 2             LOCK BOTTOM PIN 3
Kwikset Lock Bottom Pin, Series: Contemporary Style, NO 1, 0.172 in Length, Gold, For Interior Doors Kwikset Lock Bottom Pin, Series: Contemporary Style, NO 2, 0.195 in Length, Gold, For Interior Doors Kwikset Lock Bottom Pin, Series: Contemporary Style, NO 3, 0.218 in Length, Gold, For Interior Doors
LOCK BOTTOM PIN 4             LOCK BOTTOM PIN 5             LOCK BOTTOM PIN 6
Kwikset Lock Bottom Pin, Series: Contemporary Style, NO 4, 0.241 in Length, Gold, For Interior Doors Kwikset Lock Bottom Pin, Series: Contemporary Style, NO 5, 0.264 in Length, Gold, For Interior Doors Kwikset Lock Bottom Pin, Series: Contemporary Style, NO 6, 0.287 in Length, Gold, For Interior Doors
LOCK MASTER PIN 1             LOCK MASTER PIN 2             LOCK MASTER PIN 3
Cylinder pins. Cylinder pins. Cylinder pins.
LOCK MASTER PIN 4             LOCK MASTER PIN 5             LOCK TOP PIN
Cylinder pins. Cylinder pins. Kwikset Lock Top Pin, 0.16 in Length, Brass
LOCK MASTER PIN 6             LOCK TUMBLER SPRING           National Hardware V770D By-Pass Door Hardware Set
Cylinder pins. Replacement for Kwikset locks. National Hardware Door Hardware Set, By-Pass, Series: V770D, 60 lb Safe Working Load, 72 in Size, Includes: 770 Rail, 192 Adjustable By-Passing Door Guide, 790/791 Dial Action Hangers and Screws, Steel With Nylon, Galvanized, BHMA A138.18
Prime Line C1116 Door Handle Set Prime Line C-1204 Mortise Lock Handle Set PULL CLOSET DOOR BRONZE 2IN
Extruded aluminum inside pull; clamp-latch with metal activator; diecast outside pull has knock-out for converting to keyed cylinder lock; latch hook profile is 1/4"; projection is 1/2"; used by many patio door manufacturers. Handle Type: Surface Mounted. Latch Style: Clamp Style. Contents: 1 inside pull and latch assembly; 1 outside pull; installation fasteners. Diecast inside pull with wood handle; diecast thumb turn and steel latch activator; diecast outside pull. Handle Type: Mortise Style. Latch Style: Hook Style. Contents: 1 inside pull with thumb latch; 1 outside pull; installation fasteners. Plated steel, includes 2 brass nails for installation.
PULL CLOSET DOOR BRONZE 2 1/8 Prime Line C-1131 Mortise Lock Handle Set Johnson 2200F By-Pass Fascia Door Hardware Set
Plated steel, includes 2 brass nails for installation. Diecast outside pull, inside pull with wood handle, diecast thumb turns with steel latch activator. Includes 1 inside pull with thumb latch, 1 outside pull, and installation fasteners. For doors 1-3/8" thick, weighing up to 50 pounds. Aluminum fascia track. Convex track rails provide one point contact between wheel and track. Hangers includes: 7/8" diameter molded nylon machine turned wheel with three point locking plate. Adjustable hangers and door guide. Nylon 1" high guide posts and swivel. 14-16 gauge zinc dichromate plated steel parts. Set contents: (1) 2200F track; (4) 2238 hangers; (1) 2135 door guide and (2) 15 pulls.
National Hardware V771D By-Pass Door Hardware Set Johnson 1700 Door Hardware Set National Hardware 391D Folding Door Hardware Set
National Hardware Door Hardware Set, By-Pass, Series: V771D, 60 lb Safe Working Load, 96 in Size, Suitable For Use With: 3/4 - 1-3/8 in Thickness Doors, Steel With Nylon, Galvanized, BHMA A138.18 For doors up to 18" x 96" x 1-3/4", weighing 40 pounds. Automatic top of door spacing eliminates gaps. Steel track with positive pivot lock. Surface mounted pivots and guides (no hole drilling). Four way adjustable bottom pivot bracket and shock absorbing hinges. 14-16 gauge zinc dichromate plated steel parts. Includes all hardware to make 2 or 4 door panels fold. Tracks can be cut to fit smaller door/opening widths. Set Content: (1) 1700 track length, (2) 1701 top pivot lock, (2) 1701 top pivot, (2) 1705 door guide, (2) 1713 track stop, (6) 1703 hinges, (2) 1706 bottom pivot, (2) 1711 pivot bracket, (1) 1808 door aligner, (2) 33 door knob, and (1) 1712 wrench. National Hardware Folding Door Hardware Set, Series: 391D, 60 in, Surface Mount, 30 lb Safe Load, Suitable For Use With: 7/8 - 1-3/8 in Thickness Bi-Fold Doors, Steel, White
Johnson 1601 Door Hardware Set Johnson 1700 Door Hardware Set National Hardware 391D Folding Door Hardware Set
For doors 12-18" wide, 1-3/4" thick, weighing up to 30 pounds each. 14-16 gauge zinc dichromate plated steel parts. Control arms can be adjusted accommodate non-standard door panel widths. Set includes (1) 1601 control arm, (3) 1605 hinges, (3) - 1703 hinges, (1) 1513 door stop, (.5) 1808 door aligner, and (1) 33 door knob. For doors up to 18" x 96" x 1-3/4", weighing 40 pounds. Automatic top of door spacing eliminates gaps. Steel track with positive pivot lock. Surface mounted pivots and guides (no hole drilling). Four way adjustable bottom pivot bracket and shock absorbing hinges. 14-16 gauge zinc dichromate plated steel parts. Includes all hardware to make 2 or 4 door panels fold. Tracks can be cut to fit smaller door/opening widths. Set Content: (1) 1700 track length, (2) 1701 top pivot lock, (2) 1701 top pivot, (2) 1705 door guide, (2) 1713 track stop, (6) 1703 hinges, (2) 1706 bottom pivot, (2) 1711 pivot bracket, (1) 1808 door aligner, (2) 33 door knob, and (1) 1712 wrench. National Hardware Folding Door Hardware Set, Series: 391D, 72 in, Surface Mount, 30 lb Safe Load, Suitable For Use With: 7/8 - 1-3/8 in Thickness Bi-Fold Doors, Steel, White
Johnson 1700 Door Hardware Set National Hardware V770D By-Pass Door Hardware Set Smart Key 83260-001 Reset Cradle
For doors up to 18" x 96" x 1-3/4", weighing 40 pounds. Automatic top of door spacing eliminates gaps. Steel track with positive pivot lock. Surface mounted pivots and guides (no hole drilling). Four way adjustable bottom pivot bracket and shock absorbing hinges. 14-16 gauge zinc dichromate plated steel parts. Includes all hardware to make 2 or 4 door panels fold. Tracks can be cut to fit smaller door/opening widths. Set Content: (1) 1700 track length, (2) 1701 top pivot lock, (2) 1701 top pivot, (2) 1705 door guide, (2) 1713 track stop, (6) 1703 hinges, (2) 1706 bottom pivot, (2) 1711 pivot bracket, (1) 1808 door aligner, (2) 33 door knob, and (1) 1712 wrench. National Hardware Door Hardware Set, By-Pass, Series: V770D, 60 lb Safe Working Load, 96 in Size, Includes: 770 Rail, 192 Adjustable By-Passing Door Guide, 790/791 Dial Action Hangers and Screws, Steel With Nylon, Galvanized, BHMA A138.18 A tool for resetting the SmartKey cylinder if it has been improperly programmed.
LTL Spectrum VS3280H Folding Door Kit LTL Spectrum VS3280F Folding Door Kit LTL Spectrum VS3280K Folding Door Kit
Solid vinyl panel door with flexible vinyl hinges helps stop drafts. Cut with only a saw. Pre-assembled and prefinished. Lead-free, may be installed as a double door, using two single doors. Fully assembled, includes magnetic catch, 36" track with lubricant pack, necessary hardware, and easy-to-follow instructions. Fits all door openings from 24" to 36". Solid vinyl panel door with flexible vinyl hinges helps stop drafts. Cut with only a saw. Pre-assembled and prefinished. Lead-free, may be installed as a double door, using two single doors. Fully assembled, includes magnetic catch, 36" track with lubricant pack, necessary hardware, and easy-to-follow instructions. Fits all door openings from 24" to 36". Solid vinyl panel door with flexible vinyl hinges helps stop drafts. Cut with only a saw. Pre-assembled and prefinished. Lead-free, may be installed as a double door, using two single doors. Fully assembled, includes magnetic catch, 36" track with lubricant pack, necessary hardware, and easy-to-follow instructions. Fits all door openings from 24" to 36".
LTL VS3280M Folding Door Kit HANDLE SET SLIDING DOOR WHITE HANDLE SLDG DR WHT MORTISE
Solid vinyl panel door with flexible vinyl hinges helps stop drafts. Cut with only a saw. Pre-assembled and prefinished. Lead-free, may be installed as a double door, using two single doors. Fully assembled, includes magnetic catch, 36" track with lubricant pack, necessary hardware, and easy-to-follow instructions. Fits all door openings from 24" to 36". Low profile die-cast handle set for mortise locks; hook style latch, non-handed outside pull can be keyed using E 2144 key cylinder adapter kit. Standard reversible surface mount for left or right-handed mortise-locking doors. Die-cast inside pull and thumb turn with steel latch activator. Outside pull is die-cast and has a removable knock-out plug for adding a key cylinder. Note: Mounting holes may need to be enlarged to 5/16" diameter if base of handle does not seat flush against surface of door.
LTL Contempra Spectrum CT3280TL Folding Door Kit Johnson 2200F By-Pass Fascia Door Hardware Set Johnson 2610F721 Sliding Door Hardware
Door with flexible vinyl hinges helps stop drafts. Vertically embossed surface is embedded with specially blended PVC particles that become a permanent part of the durable, maintenance-free finish. Cut with only a saw. May be installed as a double door, using two single doors. Fully assembled, includes magnetic catch, 36" track with lubricant pack, necessary hardware, and easy-to-follow instructions. Fits all door openings from 32" to 36". For doors 1-3/8" thick, weighing up to 50 pounds. Aluminum fascia track. Convex track rails provide one point contact between wheel and track. Hangers includes: 7/8" diameter molded nylon machine turned wheel with three point locking plate. Adjustable hangers and door guide. Nylon 1" guide posts high and swivel. 14-16 gauge zinc dichromate plated steel parts. Set contents: (1) 2200F track; (8) 2238 hangers; (2) 1155 track stops and (2) 2155 door stops. For doors 1-1/8" to 1-3/4" thickness, weighing up to 125 pounds. Extruded aluminum fascia track, 14-16 gauge zinc dichromate plated steel parts. Track can be cut down to fit any smaller size openings. Set contents: (1) 2610F track length, (2) 1120 hangers, (1) 12 door guide, (2) 1155 track stops, (1) 1712 wrench.
HANDLE SET SLIDING DOOR WHITE Master Lock 376 Hand Held Lock Keying Tool LTL OK32-3680F Folding Door
Reversible surface mount for left or right-handed mortise-locking doors. Die-cast inside pull and thumb turn with hook style steel latch activator. Outside pull is die-cast, and must use an E-2145 if key locking feature is desired. NOTE: Latch Lever is offset from center. For universal pin series uncoded padlocks. For use on Nos. 1UP (673.6896), 1UPLJ (673.6888), 3UP (673.6904), 3UPLF (673.6870), 5UP (673.6920), and 5UPLF (673.6912). Durable and maintenance-free. Finish coated with scratch-resistant, clear UV varnish. Helps stop drafts. Fits openings from 24" to 36" wide. Trims easily to any height. Vinyl panels may be removed for door openings less than 36" wide. Can also install as a double door, using two single doors.
LTL OK3680CH Folding Door LTL EN3280K Folding Door Expansion Kit LTL Encore Spectrum Folding Door Expansion Kit
Durable and maintenance-free. Finish coated with scratch-resistant, clear UV varnish. Helps stop drafts. Fits openings from 24" to 36" wide. Trims easily to any height. Vinyl panels may be removed for door openings less than 36" wide. Can also install as a double door, using two single doors. Expandable door, with flexible vinyl hinges, helps stop drafts. Coated with a UV varnish that resists fading and scratching. Cut or expand with only a saw or screwdriver. For openings wider than 24" smaller openings or it can be combined with an expansion kit for openings up to 6' wide; double doors can fit openings up to 12' wide, expansion kit (not included). May be installed as a double door, using two single doors. Fully assembled, includes magnetic catch, 6' track with lubricant pack, necessary hardware, and easy-to-follow instructions. Expandable door, with flexible vinyl hinges, helps stop drafts. Coated with a UV varnish that resists fading and scratching. Cut or expand with only a saw or screwdriver. For openings wider than 24" smaller openings or it can be combined with an expansion kit for openings up to 6' wide; double doors can fit openings up to 12' wide, expansion kit (not included). May be installed as a double door, using two single doors. Fully assembled, includes magnetic catch, 6' track with lubricant pack, necessary hardware, and easy-to-follow instructions.
Kwikset 92720-001 Keying Kit
No.272 kit for rekeying Kwikset locks. Kit includes master pins, plug clip, knob set, springs, deadbolt locking bar, pin cover, PK balls, key step gauge, depth key, top pin, cylinder removing tool, plug following tool, rekeying tool, bottom pins, anti-pick pins for 980 deadbolts. Packed in a heavy-duty metal case.
   
 
1