Home > HARDWARE > WINDOW & DOOR HARDWARE > PATIO DOOR HARDWARE > PATIO DOOR REPAIR PARTS
Sort By:
1
Prime Line N 6565 Door Guide Prime Line N-6538 Surface Aligner Prime Line N6640 Adjustable Pivot Bracket Assembly
Single door; nylon retainer. Used by many manufacturers. Includes four no. 8 x 3/4" Phillips pan head sheet metal screws. Universal design, zinc plated steel. Mounts to back of lead doors to maintain tight closure in openings not entered from both sides. Includes set of 1-1/8"H aligners and four No.8 x 3/4" Phillips pan head sheet metal screws. Stamped steel bracket mounts into top or bottom track; fits on "Slimfold" and others.
Prime Line N 6756 Door Knob Prime Line N 6606 Adjustable Pivot Bracket Johnson 1808PPK1 Door Aligner
Stainable and paintable, for use on hollow core or solid wood bi-fold door panels. 1-3/4"D x 1"H. Includes installation screws. Fits Acme 2900 Series bi-fold doors. Steel bracket mounts into top track. 1-15/16"L x 3/4"W overall. 1-1/4 inch x 2 inch, universal bi-fold door aligner, yellow zinc plated finish.
PART DOOR FLDG ZINC PLATED    Prime Line B629 Flat Edge Sliding Door Roller Assembly Prime Line N6700 Spring Loaded Top Pin Door Pivot
Used on Croft and Keller sliding screen doors. 1/4"W x 3/8"Dia flat nylon ball bearing wheel with 3/8" threaded hex hub. Includes 2 rollers and 2 fasteners. Used by many wardrobe door manufacturers. 3/8"OD x 1"H nylon base and 1/4"OD pin with 5/16"H tip and 5/8"H from base to tip.
Prime Line B551 Bottom Mount Sliding Door Roller Assembly Johnson 1817PPK3 Bottom Mount Pivot Guide with 2-1/2 in Jamb Bracket Prime Line N6696 Adjustable Bottom Pin Door Pivot
Plastic roller with narrow center groove 7/32"W nylon wheel, concave edge. Includes a 8-32 x 3/8" machine screw with binder post nut. Fits on Air Control doors. Replaces bottom pivot/jamb bracket pivot used on tap in type hardware. Fits doors of many wardrobe manufacturers. Adjustable steel pivot with 1-3/8"H nylon base and 15/32"OD grooved tip sized for use with specified jamb brackets.
Prime Line B 512 Concave Edge Spring Tension Roller Assembly Prime Line E 2282 Door Knob Rosette Prime Line N6672 Top Pin Door Pivot/Guide
Consists of 1/4"W center groove wheel, Heat treated, high tension adjustable steel M-spring. Used by several patio door manufacturers. Screw mounted on door. 2-1/4" diameter. Used on old style passage locks. Includes 2 rosettes and installation screws. Used by many wardrobe door manufacturers. Solid-nylon guide and pivot. 3/8"OD x 1"H base and 3/8"OD x 5/8"H guide tip.
Prime Line B 521 Concave Edge Spring Tension Roller Assembly Prime Line N6673 Adjustable Bottom Pin Door Pivot Prime Line B 609 Concave Edge Spring Tension Roller Assembly
1/4"W center groove nylon wheel, high tension 2-1/2"L heat-treated steel spring, and No.8 x 3/8" Phillips pan head sheet metal screw. Fits doors of many wardrobe manufacturers. Adjustable steel pivot with 1-3/8"H nylon base and 15/32"OD grooved tip sized for use with specified jamb brackets. Bent spring design used by Academy Mfg. and others. Center grooved 5/16"W wheel, 2-1/4"L x 5/16"W flat high-tension heat-treated steel spring, and No.8 x 3/8" Phillips sheet metal screw.
Prime Line N6729 Top Pivot/Guide Rod Pin Prime Line N 6543 Adjustable Pivot Bracket Prime Line B 638 Concave Edge Spring Tension Roller Assembly
For steel frame bi-folding doors. 1/4"OD spring-loaded steel rod with 3/8"OD x 5/16"H white nylon guide cap, 5-5/8"H overall. Fits on Acme doors. Adjustable stamped steel bracket and self-lubricating nylon bushing. 2-15/16"L x 15/16"D x 1-3/16"H overall. For 1" to 1-3/8" thick folding doors up to 50 lbs. each. Includes 2 No.8 x 3/4" Phillips pan head screws and 1 No.8 x 1-1/4" Phillips flat head screw. Used by Metal Industries. Center grooved, 1/4"W, roller. 1-3/4"L, high-tension, heat-treated steel spring. Includes No.8 x 3/8" Phillips sheet metal screw.
Prime Line E 2459 Replacement Door Knob Spindle Prime Line N 6835 Door Shutter Hinge Prime Line N 6539 Wide-Track Slide Guide
Replacement spindle for antique style door knob systems and square drive systems. 9/32" diameter square drive, threaded shaft. 3-1/2" length. Includes 2 spindles. Used on bi-folding shutter doors. Allows for non-mortise installation. 7/8"W x 1"H each hinge piece, 2"H overall. Includes 2 hinges and 8 flat head installation screws. Fits on Acme doors when opening or closing. Steel springs with nylon retainer. For 1" to 1-3/8" bi-fold doors. 4"L x 3/8"H overall
Prime Line N6703 Spring Loaded Top Pivot Guide Wheel PART DOOR FLDG NATURAL        Prime Line N 6587 Adjustable Pivot Bracket
Fits Kenna Frame doors and others. 1/4"W nylon wheel with 3/8"OD x 1"H nylon base self-adjusts up to 9/16"H from base. Fits on Cox doors for horizontal adjustments. Adjustable stamped steel bracket and nylon bushing. 2-7/8"L x 7/8"D x 1-5/16"H overall. For 1" to 1-3/8" thick folding doors up to 50 lbs. each. Includes 2 No.8 x 3/4" Phillips pan head screws and 1 No.8 x 1-1/4" Phillips flat head screw.
Prime Line N 6953 Bi-Fold Guide Roller Assembly Prime Line N6704 Spring Loaded Top Pivot Guide Wheel Prime Line N6702 Spring Loaded Top Pin Door Pivot/Guide
1/4"W nylon wheel on spring-loaded steel shaft with plastic housing that tapers to 3/8" OD to allow for hammering into drilled hole. Self-adjusts from 1-1/2" to 2"H. Used by many wardrobe manufacturers. Self-adjusting 5/16"W nylon wheel with 3/8"OD x 1"H nylon base. 2-3/32"H maximum. Used by many wardrobe door manufacturers. 3/8"OD x 1"H nylon base and 19/32"OD x 7/16"H nylon cap. Spring-loaded, self-adjusts from 1-7/16"H to 2-1/16"H.
Prime Line N 6656 Non-Mortise Door Hinge Prime Line N6705 Spring Loaded Top Pin Door Pivot/Guide Prime Line N 6583 Spring Loaded Top Pin Door Pivot
Used by many wardrobe door manufacturers. 1-7/16"H cut out allows for non-mortise installation. 1"W x 3"H overall. Includes 4 flat head installation screws. Fits Alliance doors and others. 5/16"H square nylon guide tip with 3/32"W slot (7/16" inside slot), 1/4"OD pin, and 3/8"OD x 1"H nylon base. Self-adjusts to a minimum 1-7/16"H overall. Fits Cox doors, 1" to 1-3/8" thick, bi-folding doors up to 30 lbs. each; nylon base.
National Hardware V391GR Folding Door Top Roller Prime Line N6545 Spring Loaded Top Pin Door Pivot Johnson 1832PPK3 Top Mount Door Pivot Guide
National Hardware Folding Door Top Roller, Series: V391GR, Suitable For Use With: Door Frames, Steel, Plastic, Zinc Plated, BHMA A138.18 Fits Acme and Cox doors. Spring-loaded 1/4"OD pin, 7/16"OD x 1-1/2"H steel base, and 3/8"OD x 1/2"H nylon guide cap. For 1" to 1-3/8" thick bi-fold doors up to 50 lbs. each. Includes optional guide cap. 3/8" and 7/16" post diameter. Replacement top guide kit fits: Johnson Hardware, Acme, Alliance, Cox, National, Sterling, E-Z Roll.
Prime Line B570 Sliding Spring Tension Door Roller Assembly Prime Line N 6992 Adjustable Pivot Bracket Prime Line B515 Sliding Spring Tension Door Roller Assembly
Used by several patio door manufacturers. Consists of 1/4"W center groove wheel, high-tension heat-treated steel v-spring (2"L before and 2"L after bend). Used by many door manufacturers. Adjustable stamped steel bracket. 2-15/16"L x 1"D x 1-1/4"H overall. Bottom pivot with 7/16" OD stem, nylon base and steel pin that has a 1/2"OD tip with 3/8"W groove. Includes bracket, bottom pivot and 3 installation screws. Used as top and bottom roller by several patio door manufacturers. Consists of 1/4"W center groove nylon wheel, 2"L x 3/8"W steel housing, high-tension heat-treated steel spring.
Prime Line N 6711 Adjustable Bottom Pin Pivot Bracket Prime Line N6701 Top Pin Door Pivot/Guide PART DOOR FLDG ZINC PLATED
Fits on Johnson Hardware doors. Steel bracket with nylon bushing insert to accept pivot pin. 3-1/16"L x 1"W overall. Includes two No.8 x 1-1/4" Phillips pan head screws. Fits Johnson doors and others. Spring-loaded top guide and pivot with 7/16"OD x 1-5/16"H nylon base, and 7/16"OD x 1/4"H nylon cap.
Prime Line B 649 Concave Edge Spring Tension Roller Assembly Prime Line N 6582 Self-Adjusting Guide Wheel Prime Line N 6544 Self-Adjusting Spring Loaded Guide Wheel
Plastic center grooved wheel with steel housing, high-tension steel spring. Fits on Columbia Uni-fit doors. Contents: 2 roller assemblies. Nylon base; fits Cox doors. 1/4"W nylon wheel with 7/16"OD x 1-1/2"H nylon base self-adjusts from 1-7/8" to 2-1/2" in track for smooth guiding of lead door. For 1" to 1-3/8" thick bi-fold doors up to 30 lbs. each. Steel base; fits Acme and Cox doors. 1/4"W nylon wheel with 7/16"OD x 1-1/2"H steel base self-adjusts from 1-7/8" to 2-1/2" in track for smooth guiding of lead door. For 1" to 1-3/8" thick bi-fold doors up to 30 lbs. each.
Prime Line N 6707 Adjustable Bottom Pin Door Pivot Prime Line N 6755 Door Knob Prime Line N6637 Top Pivot Pin
Fits Johnson doors and others. 7/16"OD x 1-5/16"H nylon base with 1/4"OD steel tip. Adjustable, 2-5/8" max extension. For use on hollow core or solid wood bi-fold door panels. 1-3/4"Dia. x 9/16"H. Includes installation screws. Top pivot steel pin, with 3/8" O.D. nylon cap, 5/16" diameter, 6 - 3/8" long.
PART DOOR FLDG ZINC PLATED    Prime Line B518 Sliding Screen Tension Door Roller Assembly Prime Line B513 Sliding Spring Tension Door Roller Assembly
Adjusts bi-fold doors up or down, left or right. Surface mount for easy installation. Manufactured with cold-rolled steel and nylon. Used as top and bottom roller. Plastic wheel with center groove. 1-7/8"L housing, heat treated, high tension steel spring, and No.8-32 x 1-1/4" Phillips pan head screw. Consists of 1/4"W center groove wheel, Heat treated, high tension adjustable steel M-spring. Used by several patio door manufacturers.
Prime Line B 639 Concave Edge Spring Tension Roller Assembly National Hardware V530 Flush/Full Inset Door Hinge PUSH PLATE 3-1/2X15IN OR BRNZ
Used by Metal Industries. Center grooved, 1/4"W, roller. 1-3/4"L, high-tension, heat-treated steel spring. Includes No.8 x 3/8" Phillips sheet metal screw. National Hardware Door Hinge, Flush/Full Inset, Series: V530, Suitable For Use With: 1 in Think Bi-Fold Doors, Removable Pin, Surface Mounting, 25 lb Load Capacity, 3 in Overall Length, Steel, Brass, For Residential Applications
PUSH PLATE 3-1/2X15IN SAT NIC Prime Line N6612 Top Mount Door Pivot Prime Line N 6611 Self-Adjusting Guide Roller Assembly
Top-mount with concealed spring-loaded pin for easy hanging and operating of doors. Steel 3/8"OD pivot and 1/4"OD pin with 1/4"H tip, 1-3/4"H overall. Includes two 1-1/4" nails. Self-adjusting 1/4"W nylon wheel with steel 3/8"OD base. 1-3/4"H overall. For 1" to 1-3/8" thick bi-fold doors up to 30 lbs. each. Includes two 1-1/4" nails.
Prime-Line N 7385 Door Knob Prime-Line N 7372 Door Knob Prime-Line B 705 Bug Seal
Wide base prevents hollow door crush, and large diameter allows for easy gripping. 1-11/16" diameter Wide base prevents hollow door crush, and large diameter allows for easy gripping. 1-11/16" diameter Flap has tear strips to adjust width from 3/4" to 1-3/8". Flexible, seals against insects.
PUSH PLATE 3-1/2X15IN BRT BRS Prime Line D1723 Concave Edge Sliding Door Roller Assembly Prime Line D 1563 Concave Edge Roller Assembly
Used by many patio door manufacturers. Steel ball bearing roller in adjustable 2-5/8"L x 1-3/8"H x 3/4"D steel housing with 10-32 machine thread hole on top center and 1/4-20 side threads for mounting. Used by Air Control, Howmet, Krestmark and many other patio door manufacturers. Steel ball bearing roller and adjustable 2-5/8"L x 1-3/8"H x 3/4"D steel housing assembly with machine threaded holes (10-32 top and 1/4-20 side) for installation.
Prime Line N 6614 Self-Adjusting Spring Loaded Guide Wheel Prime Line D1503 Concave Edge Sliding Door Roller Prime Line D 1502 Concave Edge Center Grooved Roller Assembly
Self-adjusting 1/4"W nylon wheel with 3/8"OD steel base. 1-3/4"H overall. For 1" to 1-3/8" thick bi-fold doors up to 30 lbs. each. Includes two 1-1/4" nails. Contents: 2 rollers Steel ball bearing roller, steel inner race with 1/4" hole, center grooved. For sliding glass doors. Center grooved, 5/16"W steel ball bearing roller and steel inner race with 1/4"-20 x 3/4" carriage bolt and 1/4"-20 hex nut.
Prime-Line N 7283 Bi-Fold Door Repair Kit Schlage C8200PA28 Push Plate DOOR KNOB FLUTED SATIN NICKEL
Repair kit is for 3/8 in. diameter holes. Fits 7/8 in. wide top tracks. Kit includes most parts needed to repair one 2 door set. Protects interior or exterior door surface. One spindle, 2" diameter, used on interior latch sets. Fits 9/32" square drive spindle systems common on antique and vintage door hardware sets.
Prime Line D1688 Concave Edge Sliding Door Roller Assembly DOOR KNOB FLUTED BRONZE       Prime Line E 2279 Door Knob
Steel ball bearing roller and adjustable steel housing assembly. Fits on Nu-Air, Bennings, Scotty and many other patio door manufacturers. One spindle, 2" diameter, used on interior latch sets. Fits 9/32" square drive spindle systems common on antique and vintage door hardware sets. 2" diameter glass knob with brass plated, diecast base. 1-15/16" projection. 9/32" square spindle.
Toolbasix 7296510-3L Door Knob Set PLATE PUSH ANT BRS 3-1/2X15IN Prime Line D 1831 Concave Edge Roller Assembly
2 knobs, spindle, and screws included. Designed to protect the surface and cover holes on swinging doors, especially in high traffic areas. Anodized surface for extra durability. Plastic cover to protect finish during installation. Mounting screws included. Steel ball bearing roller; adjustable steel housing assembly; used by many patio door manufacturers. Housing dimensions: 2-5/8" length, 1-1/8" height, and 3/4" width. 10-32 machine thread on top and 1/4-20 machine thread on end of housing.
Prime Line E 2294 Mortise Lock Assembly Prime Line E 2297 Victorian Door Knob Prime Line E-2000 Cylinder Lock
Mortise caselock with brass plated faceplate. Case hardened steel housing. Spindle hole accommodates 1/4" to 5/16" square shaft. Includes 1 mortise caselock assembly, strike plate, and installation screws. Victorian style 2-3/16" diameter solid brass knobs. Uses a 9/32" square drive, fits old style bit key lock systems. Includes spindle. Cylinder Lock, 1-1/4", 5 pin tumbler lock with 2 keys; hardened break-away tailpiece. Used to keylock most surface mount handle sets. Keyway is Compatible To: Weiser, Kwikset & Weslock.
PUSH PLATE 3.5IN X 15IN       Toolbasix 7296601-3L Door Knob Set Prime Line B 684 Concave Edge Center Grooved Roller Assembly
Square corner-beveled .050 gauge. 2 knobs, spindle and screws included. Nylon outer housing, aluminum inner housing with center grooved nylon wheel with adjustment cam. Contents: 2 roller assemblies, installation screws.
Prime Line D 1607 Concave Edge Adjustable Roller Assembly Prime Line E 2014 Mortise Lock Prime Line D1808 Concave Edge Sliding Door Roller Assembly
2-roller tandem design. 6-1/4"L x 1-3/16"H x 11/16"D adjustable steel housing with 2 steel ball bearing rollers. Steel housing and hook, round end face plate. Hook position is adjustable, fits on W&F. Hole Center: 3-11/16". Tandem steel ball bearing roller; adjustable; steel housing assembly. Housing Width: 3/4". Roller Edge Type: Concave. Contents: 1 roller assembly
Schlage C8200B3 Push Plate National Hardware 391S Folding Door Hardware Set Prime Line E-2164 Mortise Lock
Schlage Push Plate, Series: C8200, 3-1/2 in Width X 15 in Length, Solid Brass National Hardware Folding Door Hardware Set, Series: 391S, 36 in, Surface Mount, 30 lb Safe Load, Suitable For Use With: 7/8 - 1-3/8 in Thickness Bi-Fold Doors, Steel, White Mortise Lock for Sliding Patio Doors, 45 degree lever slot. Adaptor faceplate allows for use on wood and vinyl patio doors. 4-5/8" hole center (hole to hole). 45 degree keyway.
Kwikset 293 3CP Round Trim Rosette ROLLER SLDG DR BRS STL BEARING PLATE PUSH BRASS 3-1/2X15IN
3-13/16" diameter. For 2-3/8" or 2-3/4" backset. 1-1/4" tandem steel ball bearing rollers; adjustable steel housing; dimensions: thickness, 11/16"; length, 3-1/8"; height, 1-1/32". Roller edge type: Concave. 2 tandem wheels in roller assembly, Designed to protect the surface and cover holes on swinging doors, especially in high traffic areas. Anodized surface for extra durability. Plastic cover to protect finish during installation. Mounting screws included.
PLATE PUSH ORB 3-1/2X15IN     PLATE PUSH ALUMINUM 3-1/2X15IN Prime Line E-2317 Adjustable Knob Passage Door Latch Set
PLATE PUSH ORB 3-1/2X15IN
Our Price: $15.65
Designed to protect the surface and cover holes on swinging doors, especially in high traffic areas. Anodized surface for extra durability. Plastic cover to protect finish during installation. Mounting screws included. Designed to protect the surface and cover holes on swinging doors, especially in high traffic areas. Anodized surface for extra durability. Plastic cover to protect finish during installation. Mounting screws included. Latchbolt operated by knob on either side; both knobs always free. Diecast latch. Glass knobs. Spindle hole accommodates  5/16" star drive, 1/4" to 5/16" square shaft. Use as decorative passage latch for 2-3/8" backset applications. Includes 1 passage door latch, 1 spindle, 2 knobs, 2 rosettes, and installation screws.
Prime Line E 2437 Reversible Door Lockset Johnson 1700 Door Hardware Set Prime Line E 2478 Lockset
Cast steel case lock and keeper. Surface mount design. Brass plated steel knobs and rosettes. Skeleton key system. Used on non mortise applications. Includes 1 lock, 1 keeper, 1 key rosette, 1 knob rosette, 2 knobs, and 2 keys. For doors up to 18" x 96" x 1-3/4", weighing 40 pounds. Automatic top of door spacing eliminates gaps. Steel track with positive pivot lock. Surface mounted pivots and guides (no hole drilling). Four way adjustable bottom pivot bracket and shock absorbing hinges. 14-16 gauge zinc dichromate plated steel parts. Includes all hardware to make 2 or 4 door panels fold. Tracks can be cut to fit smaller door/opening widths. Set Content: (1) 1700 track length, (2) 1701 top pivot lock, (2) 1701 top pivot, (2) 1705 door guide, (2) 1713 track stop, (6) 1703 hinges, (2) 1706 bottom pivot, (2) 1711 pivot bracket, (1) 1808 door aligner, (2) 33 door knob, and (1) 1712 wrench. Cast steel case lock and keeper. Surface mount design. Brass plated steel knobs and rosettes. Skeleton key system. Used on non mortise applications. Includes 1 lock, 1 keeper, 1 key rosette, 1 knob rosette, 2 knobs, and 2 keys.
Toolbasix 6870372-3L Mortise Lock National Hardware 391D Folding Door Hardware Set LOCK SLDG DR STL PLTD
Steel knob with brass plating. For home and office use. Includes trim plate, strike, knob and two keys. Deadbolt locks from both sides. 2-3/8" backset. 3"L x 9/16"W x 3-7/8"H overall dimensions, 2-9/32"W x 7-1/16"L trim plate. National Hardware Folding Door Hardware Set, Series: 391D, 48 in, Surface Mount, 30 lb Safe Load, Suitable For Use With: 7/8 - 1-3/8 in Thickness Bi-Fold Doors, Steel, White Steel mortise latch designed for wood stiles; adjustable bolt throw; Vertical keyway, round faceplate, slanted housing corners. 1,000 pound strength.
Prime-Line N 6710 Bi-Fold Door Top Pivot Bracket Prime Line E-2311 Victorian Keyed Mortise Lock Set KNOB GLASS MORTISE BRONZE
Plastic base; steel track clip; installs into top track to accepts top pivot pin; fits Johnson "new style" Hardware. Fluted glass knobs with brass plated steel trim plates. Case-hardened steel housing. Lock bolt is key activated both inside and outside. May be used for left or right hand installations. Includes 1 mortise caselock assembly, 2 knobs, 2 trim plates, strike plate, and installation screws. Glass knobs on case-hardened steel. Lock bolt is key activated both inside and outside. Latch bolt is reversible for right or left hand installations.
KNOB GLASS MORTISE SAT NCKL   HINGE BI-FOLD DOOR SNCKL      National Hardware 391D Folding Door Hardware Set
Glass knobs on case-hardened steel. Lock bolt is key activated both inside and outside. Latch bolt is reversible for right or left hand installations. Used by many wardrobe door manufacturers. 1-7/16"H cut out allows for non-mortise installation. 1"W x 3"H overall. Includes 4 flat head installation screws. National Hardware Folding Door Hardware Set, Series: 391D, 60 in, Surface Mount, 30 lb Safe Load, Suitable For Use With: 7/8 - 1-3/8 in Thickness Bi-Fold Doors, Steel, White
Johnson 1700 Door Hardware Set Johnson 1601 Door Hardware Set National Hardware 391D Folding Door Hardware Set
For doors up to 18" x 96" x 1-3/4", weighing 40 pounds. Automatic top of door spacing eliminates gaps. Steel track with positive pivot lock. Surface mounted pivots and guides (no hole drilling). Four way adjustable bottom pivot bracket and shock absorbing hinges. 14-16 gauge zinc dichromate plated steel parts. Includes all hardware to make 2 or 4 door panels fold. Tracks can be cut to fit smaller door/opening widths. Set Content: (1) 1700 track length, (2) 1701 top pivot lock, (2) 1701 top pivot, (2) 1705 door guide, (2) 1713 track stop, (6) 1703 hinges, (2) 1706 bottom pivot, (2) 1711 pivot bracket, (1) 1808 door aligner, (2) 33 door knob, and (1) 1712 wrench. For doors 12-18" wide, 1-3/4" thick, weighing up to 30 pounds each. 14-16 gauge zinc dichromate plated steel parts. Control arms can be adjusted accommodate non-standard door panel widths. Set includes (1) 1601 control arm, (3) 1605 hinges, (3) - 1703 hinges, (1) 1513 door stop, (.5) 1808 door aligner, and (1) 33 door knob. National Hardware Folding Door Hardware Set, Series: 391D, 72 in, Surface Mount, 30 lb Safe Load, Suitable For Use With: 7/8 - 1-3/8 in Thickness Bi-Fold Doors, Steel, White
Johnson 1700 Door Hardware Set Johnson 1700 Door Hardware Set Master Lock 376 Hand Held Lock Keying Tool
For doors up to 18" x 96" x 1-3/4", weighing 40 pounds. Automatic top of door spacing eliminates gaps. Steel track with positive pivot lock. Surface mounted pivots and guides (no hole drilling). Four way adjustable bottom pivot bracket and shock absorbing hinges. 14-16 gauge zinc dichromate plated steel parts. Includes all hardware to make 2 or 4 door panels fold. Tracks can be cut to fit smaller door/opening widths. Set Content: (1) 1700 track length, (2) 1701 top pivot lock, (2) 1701 top pivot, (2) 1705 door guide, (2) 1713 track stop, (6) 1703 hinges, (2) 1706 bottom pivot, (2) 1711 pivot bracket, (1) 1808 door aligner, (2) 33 door knob, and (1) 1712 wrench. For doors up to 18" x 96" x 1-3/4", weighing 40 pounds. Automatic top of door spacing eliminates gaps. Steel track with positive pivot lock. Surface mounted pivots and guides (no hole drilling). Four way adjustable bottom pivot bracket and shock absorbing hinges. 14-16 gauge zinc dichromate plated steel parts. Includes all hardware to make 2 or 4 door panels fold. Tracks can be cut to fit smaller door/opening widths. Set Content: (1) 1700 track length, (2) 1701 top pivot lock, (2) 1701 top pivot, (2) 1705 door guide, (2) 1713 track stop, (6) 1703 hinges, (2) 1706 bottom pivot, (2) 1711 pivot bracket, (1) 1808 door aligner, (2) 33 door knob, and (1) 1712 wrench. For universal pin series uncoded padlocks. For use on Nos. 1UP (673.6896), 1UPLJ (673.6888), 3UP (673.6904), 3UPLF (673.6870), 5UP (673.6920), and 5UPLF (673.6912).
   
 
1